Upload
legacykoji
View
216
Download
0
Embed Size (px)
Citation preview
7/28/2019 PB WIM Systems
1/2
Western Australia:191 Carr Place
Leederville WA 6007
AustraliaP: +61 8 9227 3000
F: +61 8 9227 3030
China:
Floor 13, Zhen Xing Building
118 North Hu Bin RoadXiamen PRC
P: +86 592 2135 552
F: +86 592 2136 663www.arrb-china.com.cn
Queensland:
123 Sandgate RoadAlbion QLD 4010
Australia
P: +61 7 3260 3500F: +61 7 3862 4699
UAE:Unit 101, Al Safa Tower
Sheikh Zayed Road
Dubai, UAEP: +971 4332 8532
F: +971 4332 8584
www.arrb-me.com
South Australia:
Aurora BuildingSuite 507, 147 Pirie St
Adelaide SA 5000
AustraliaP: +61 8 7200 2659
F: +61 8 8223 7406
Luxmoore Parking ConsultingGround Floor, 12 Wellington
Parade
East Melbourne, VIC 3002P: +61 3 9417 5277
F: +61 3 9416 2602
New South Wales:
2-14 Mountain StUltimo NSW 2007
Australia
P: +61 2 9282 4444F: +61 2 9280 4430
Head Office:
Australia, Victoria:
500 Burwood HighwayVermont South VIC 3133
Australia
P: +61 3 9881 1555F: +61 3 9887 8104
ARRB Group LtdABN 68 004 620 651www.arrb.com.au
Regional Offices:
About ARRB:
ARRB Group Ltd (ARRB) providesresearch, consulting and
information services to the road
and transport industry. ARRBapplies research outcomes to
develop equipment that collects
road and traffic information andsoftware that assists with decision
making across road networks.
ARRB is the leading provider ofroad research and best practice
workshops in Australia.
MATERIALS, PAVEMENT & CONCRETE DESIGN & TESTING | TRANSPORT POLICY, OPERATIONS & ECONOMICS |
INFRASTRUCTURE ASSET MANAGEMENT | EQUIPMENT MANUFACTURE & DATA COLLECTION SERVICES |
SAFE SYSTEMS | ROAD SAFETY | TRAFFIC ENGINEERING | HEAVY VEHICLE TESTING & SIMULATION | PARKING |
LAND TRANSPORT RESOURCES & INFORMATION | KNOWLEDGE TRANSFER & CAPACITY BUILDING |
Weigh-in-MotionSystems
February 2011
7/28/2019 PB WIM Systems
2/2
Building on 50 years of road and transport research
Express-Weigh
The Express-Weigh Weigh-in-Motion system is a highly accurate dataacquisition system that integrates Kistler LINEAS quartz sensors with acustom built data logger.
The quartz sensors are installed into slots cut directly into the
road surface (asphalt or concrete) and are grouted with acompound of epoxy and silica sand.
The system is capable of collecting vehicle volume, speed,classification and axle mass data.
Applications
Vehicle mass statistics
Detecting overloaded vehicles on the road network
Acquiring vehicle data for traffic statistics
Verifying optimal load distribution between wheels, axlesand axle groups
Screening to divert overloaded vehicles for enforcementweighing
Gathering data for road design
Features
The Kistler LINEAS quartz sensors have highly stable
electrical and mechanical properties
Wide measuring range; passenger vehicles can beweighed as accurately as heavy vehicles
Measures the axle mass of vehicles travelling at highwayspeeds
Works reliably over a wide pavement temperature range
Low maintenance costs and long life of system
Sensors are flush with the road surface
No induction loops required
Conforms to ASTM E1318-02 Type 1 requirements
Total monitored lane width is 3.5m
Up to two lanes per logger
www.arrb.com.au
Culway 3G
Culway 3G is a high speed Weigh-in-Motion system that uses sensorsinstalled within a box culvert to unobtrusively monitor traffic.
The Culway 3G accurately measures and records up to two
lanes of weigh-in-motion data, storing the data in a custommade logger.
The system is capable of collecting vehicle volume, speed,classification and axle mass data.
Applications
Pavement design, management and performance
monitoring
Screening for enforcement applications
Tolling applications
Pavement loading information including axle loads, axle
group loads and axle spacing
Strategic freight movement analysis and information for
the transport industry
Development of road safety strategies
Real-time traffic information
Features
3G modem for wireless communications
Capable of communicating with multiple sites
simultaneously
Remote access of calibration factors
Real-time viewing of vehicle, MSA and Piezo data
Sensors not affected by road re-surfacing
Low power consumption
Windows based software (single application for allfeatures)
Advanced filtering options on fleets, including editable
limits
Up to two lanes per logger