PATRIOT3 BALLISTICS

P3B delivers lightweight, ballistic products that include a full line of personal protection shields, ballistic fragmentation systems and mobile ballistic barriers. Patriot3 holds patents or US patent pending status on all of its ballistic products. All products are made in the USA.

21

REVOLUTIONARY BY DESIGN

Minuteman 1 weighs 23 lbs., is sized at 24” x 48”, and has a NIJ IIIA threat level. The 2” x 9” viewport provides the user with a clear line of sight without compromising protection. The Minuteman 1 is covered in a ballistic nylon material and includes a discreet carry bag.

Minuteman 2 weighs 15 lbs., is sized at 19” x 34”, and has a NIJ IIIA threat level. The 2” x 9” viewport provides the user with a clear line of sight without compromising protection. The Minuteman 2 is covered in a ballistic nylon material and includes a discreet carry bag.

The Minuteman 3 weighs 20 lbs., is sized at 19” x 34”, and has a NIJ III threat level. The Minuteman 3 is covered in a ballistic nylon material and includes a discreet carry bag.

The Minuteman 3 w/ Viewport weighs 28 lbs., is sized at 19” x 34”, and has a NIJ III threat level. The 2” x 6” viewport provides the user with a clear line of sight without compromising protection. The Minuteman 3 w/ Viewport is covered in a ballistic nylon material and includes a discreet carry bag.

Minuteman 1 Minuteman 2

Minuteman 3 w/ Viewport Minuteman 3

The Minuteman Folding Ballistic shield is available in four different options that can fit any Patrol, SWAT, VIP Protection, Harbor or Airport Security team’s needs. The Minuteman, which carries a US Patent, folds and stows in a convenient and non-descript carry bag that comes complete with a grab handle and carry strap. Webbing on the lower half of the shield can be used for miscellaneous stored items such as flex cuffs or stiffening rods, along with providing convenient storage space. Sheriff or Police patches are provided and custom patches are available upon request. The Minuteman is also available in red, non-ballistic units for training purposes.

3MINUTEMAN SERIES

The Flex Field is an articulating ballistic fragmentation barrier that deploys in seconds. The US Patent protected Flex Field is stowable, highly mobile, and can be adjusted to various angles or configurations to suit the environment. Immediately out of the case, the Flex Field begins protecting as a shield against ballistic rounds or blast fragmentation. Numerous handles are present for quick and easy maneuvering to carry equipment and, in worst case scenarios, doubles as a field litter.

The Flex Field 3A utilizes articulated poles which shape the barrier and also allow for ease of mobility. The Flex Field 3A has a NIJ IIIA threat level, weighs 65 lbs. and measures 98” x 48” when fully deployed. The Flex Field 3A comes complete with a protective carrying case, along with Police or Sheriff patches. Custom patches are available upon request.

The Flex Field 3 is available in 2, 3, or 4-panel configurations. The Flex Field 3 has a NIJ III threat level with a large area of protection and can be used as a stationary or mobile bunker. The Flex Field 3 can weigh up to 125 lbs. and provide a protection size of 90” x 48”. Each shield includes a protective carrying case.

The US Patented Flex Shield is the ideal shield for your patrol needs. The fastest, deployable personal protection shield on the market, the Flex Shield can be deployed in seconds. The Flex Shield weighs only 11 lbs. and measures 24” x 45” when deployed. The Flex Shield rolls for convenient carrying or storage and has a NIJ IIIA threat level. The Flex Shield has the versatility to be used in both rigid and non-rigid configuration. Police or Sheriff patches are included with the Flex Shield. Custom patches are available upon request.

Flex Shield

Flex Field 3A Flex Field 3

Flex Field NIJ Level IIIA Shown Flex Field NIJ Level III Shown

5FLEX FIELD FLEX SHIELD

• Size: 28” x 74” (Base Unit)• Size: 62” x 74” (w/ Wings Deployed)• Front Wheels: 10” Solid Core Fixed• Rear Wheels: Casters with Brakes

• LED Light System• Gun Ports• 18” Ballistic Wings• 18” Ballistic Wings w/ Viewports• Wing Handles (NIJ Level III Only)• Rolling Case

• NIJ Level III or IV available

Specifications

Options

Patriot3’s X-treme Protection Series (XPS) shield is high threat protection designed for maximum versatility, superb mobility, and ease of use. The XPS’s unique, US Patent protected design incorporates the first ever, Folding Ballistic Wings. The ballistic wings are added to provide a wide area of coverage beyond that of the base unit, and can be mechanically articulated. This mechanical articulation enables the XPS to pass through most doorways and then expand to resume its larger area of protection. The wings can be removed quickly to act as four independent ballistic shields on the NIJ III only.

XPS-G2 with Wings Deployed Shown

XPS-G2 with WingsRetracted Shown

XPS-G2 with WingsRemoved Shown

7X-TREME PROTECTION SERIES (XPS)

The Hardline Entry Shield has been designed to address operator’s needs for lightweight protection. A large ballistic viewport along with the curved grip handle allows the user to achieve tighter positioning behind protection. The Hardline is available in both NIJ IIIA and NIJ III, and also has the option of straight edge or ergonomic sides for maneuverability.

• Size: 21” x 38” with or without ergonomic edge• Ballistic Viewport: 3” x 10” • Weight: 19 lbs. with ergonomic edge• Weight: 21 lbs. w/ out ergonomic edge• NIJ IIIA

• Size: 21” x 38” with or without ergonomic edge• Ballistic Viewport: 3” x 10”• Weight: 28 lbs. with ergonomic edge• Weight: 30 lbs. w/ out ergonomic edge• NIJ III

Hardline 3A Hardline 3

FrontShown w/ Ergonomic Edge

Shown w/out Ergonomic Edge

Back

Patriot3’s US Patented Ladder Shield is the only ballistic shield and ladder combination available. Its lightweight design, access capabilities, versatility, and two protection levels make it the top choice of all law enforcement officials worldwide. An optional light system is available for the Ladder Shield.

The Ladder Shield NIJ IIIA model weighs 31 lbs. and measures 24” x 48”, with a 4” x 18” ballistic viewport to provide a clear line of sight without compromising protection. The aluminum ladder frame has stainless steel spikes for sure footing and a maximum load rating of 300 lbs. at a 15° angle.

The Ladder Shield NIJ III model weighs 75 lbs. and measures 24” x 48”, with a 4” x 18” ballistic viewport to provide a clear line of sight without compromising protection. The aluminum ladder frame has stainless steel spikes for sure footing as well as fixed wheels for ease of mobility and a maximum load rating of 300 lbs. at a 15° angle.

Ladder Shield 3Ladder Shield 3A

Front

Back

9LADDER SHIELD HARDLINE

The Armor Wall is the first truly discrete high-threat protective barrier system for VIP and high profile environments. Assembled in less than five minutes, the Armor Wall can stand alone or be connected to become a continuous barrier. Covered in your choice of decorative laminates, the Armor Wall can blend nicely with its surroundings, enhancing its covert status. The Armor Wall comes complete with all connecting hardware and rolling case. Optional aluminum mobile carriage is also available. The Armor Wall is ideal for temporary or permanent placement, hallway and entrance barrier, window/void protection, VIP podium protection, as well as other uses.

• Wall Section Size: 43.5” x 84”• NIJ III Weight: 160 lbs.• NIJ IV Weight: 240 lbs.• Aluminum Finish: Clear Anodized• Laminate: Customer Choice

• 4” x 16” Ballistic Viewport• 4” Opening Gun Port

Specifications Options

The Single Ballistic Panel (SBP) is the foundation of the Armor Wall system. The SBP assembles quickly and is discreet within its environment. It can be utilized as a standalone system or connected in series to create a continuous protective barrier. A conversion kit is available to connect four (4) SBP’s to create an Armor Wall system. The SBP is available in NIJ III or NIJ IV threat levels.

• NIJ III or NIJ IV Panel 20”x40”• Strike Face Laminate Options Available*• Support Foot w/ Low Profile Caster & Lock• Vertical Frame Member w/ Ballistic Insert• Horizontal Frame Member w/ Ballistic Insert• Cosmetic Cap (For Vertical Frame Member)• Cosmetic Cap (For Horizontal Frame Member)• 4mm Hex Wrench• Assembly Hardware• Rigid Rolling Storage Case

*Strike Face Laminate to match customer specification, agent side is powder coated Aluminum

AW SBP Kit Includes:

SBP KIT A- NIJ IVCeramic provides a panel weight of 55 lbs.

SBP KIT B- NIJ IVCarbide provides a panel weight of 45 lbs.

SBP KIT C- CONVERSION KITThe SBP Conversion Kit allows four (4) SBP Kits to be converted into one (1) Full-Size Armor Wall NIJ Level IV

SBP3- NIJ IIIComposite provides a panel weight of 21 lbs.

11ARMOR WALL ARMOR WALL SBP

Patriot3’s US Patent pending Quad-Purpose Tactical Ladder was developed to be a compact, lightweight, and portable aluminum ladder system. The Q-PTL may be used as a mobile ballistic barrier, standard straight ladder, hanging ladder, litter, A-frame ladder, or a unique horizontal bridge. The Q-PTL utilizes identical 2’ long sections, which may be joined together with pins to create a ladder and/or bridge up to 12’ long. The Q-PTL has the option of two NIJ IIIA ballistic blankets that join together and can be mounted to the ladder system to protect the user. The Q-PTL baseline kit includes six ladder sections and two breaching hooks.

• (2) Wheel Bracket Assembly• (2) NIJ IIIA Ballistic Blankets (sized 24” x 41” in each)• (6) Bridging Plates• Pull Strap Lanyard• Quick Release Carrier

Options

13QUAD-PURPOSE TACTICAL LADDER (Q-PTL)

THE COMPANY

Patriot3, an American owned Small Business began operations in Quantico, Virginia in May 2000 to provide specialized equipment for Special Forces and Law Enforcement worldwide. Today, Patriot3 has four divisions that include, Ballistic Products, Elevated Tactics Systems, Maritime and Kinetics.

Patriot3 employs a full staff of Engineers, Sales and Field Representatives, Office and Production personnel at their Corporate Headquarters in Fredericksburg, Virginia. Day-to-day operations are much the same today as they were in the beginning. Patriot3’s dynamic staff enjoys meeting the challenges of development, engineering, manufacturing, marketing and training of unique, state of the art tactical and maritime equipment.

Patriot3 enjoys a reputation as a premier provider and authority in tactical operations and specialty maritime products, as well as being a leader in innovation and winner of the prestigious Spirit of NTOA, Small Business Administration’s Exporter of the Year and GovSec Homeland Security Awards. Patriot3 has products in operation all over the world and has exported to more than 40 countries.

Patriot3 strives to offer next generation products developed for unprecedented mobility and ease of use that address their client’s latest challenges. Patriot3 always has numerous new products in all stages of development as well as continuing to upgrade and refine products currently in use. Patriot3 Associates are eager to work with operators to find simple, viable solutions for the challenges they encounter in the field as well as ensuring Patriot3 products remain cutting edge and a step above.

ABOUT PATRIOT3

Mobile Ballistic Barrier Configuration

Litter Configuration Bridging Configuration

A-Frame ConfigurationQuick Release Carrier

Hanging Ladder Breaching Hooks Shown

Patriot3 Elevated TacticsPatriot3 is the worldwide leader in Elevated Tactics Systems (ETS). Our vehicle mounted systems permit elevated access to buildings, aircraft, trains and buses; assisting special units and rescue teams to take control of difficult situations.

Patriot3 BallisticsPatriot3 is a premier provider of lightweight, mobile ballistic products and shields. Our product line includes a wide range of patented personal protection shields, ballistic fragmentation systems and mobile ballistic barriers.

Patriot3 MaritimePatriot3 offers a variety of innovative specialty equipment for waterborne operations. Our products are designed to enhance mobility, stealth and quick-strike capabilities in unforgiving environments.

Patriot3 KineticsPatriot3’s newest division, P3K, was established to develop and manufacture ballistic measurement and instrumentation for tactical, military and ballistic test range applications.  P3K also performs research, design, development, integration and support of ground based radar and airborne sensor systems designed to operate in severe and demanding environments.

Made in USA

ACXODUS ASIA18 Boon Lay Way #09-107/108 Tradehub 21 Singapore 609966 Phone : +65 6297 0600 | Email : info@acxodus.com | www.acxodus.com