Embed Size (px)
Citation preview
engie-fabricom.com
Passion for industry
MaintenanceInstallationDesign
Expertise through experience
At ENGIE Fabricom, we are ready to meet the needs of all industrial customers. Our core activities include the design, construction and maintenance of electromechanical equipment and systems throughout Belgium and Luxembourg.
Our services are 100% customer directed and we are committed to find integral solutions.
Electricity & Instrumentation
Process Control, Automation & Systems
From the outset of its activities, ENGIE Fabricom has been a major player in the complete energy chain from electricity generation to electricity distribution. This is why we can offer our industrial clients all-in-one electricity distribution and process instrumentation solutions. From our network of workshops, our experienced project managers steer your energy along the right lines.
As we are all too aware that process control and automation are fundamental to every industrial client, ENGIE Fabricom offers tailor-made, all-embracing solutions, regardless of your choice of platform. We provide A-to-Z support: from feasibility studies right through to hard and software engineering, testing and commissioning, not to mention an outstanding after-sales service.
> Industrial electrical installations, medium and low-voltage distribution
> Above ground and underground electricity distribution
> Assembly and cabling of heavy-power equipment and controls
> Low-voltage cabinets, electrical supply panels, control boxes, control desks, pneumatic distribution
> Lighting, earthing networks, tracing, relighting
> IT networks, data cabling and fibre optics
> Installation, connection and setup of instrumentation and valves
> Fire protection, access control and intruder protection
> Commissioning and maintenance of industrial installations
> Industrial removal of complete or partly production lines
> Integrated multi-technical solutions
> ICT, industrial computing
> Telemetry, SCADA
> PLC and DCS
> MES, MIS
> Logistics Management Systems
> Validation
> Process engineering and control
> Controls for engines and drives
> Energy systems (CHP, Waste-to-Energy, biomass)
Some of our specialist areas
> Coil rolling lines in the steel industry
> Furnace controls
> Overhead and travel cranes
> Assembly lines, conveyor systems
> Float lines in the glass industry
> DeNOx and flue gas installations for incineration plants
> High Purity Contracting (process control, engineering and clean high purity piping)
> Security systems for process or engines safety (e.g. ESD)
> Automation of logistical systems
Maintenance & Specialised Services
Piping & Mechanical
Panels
ENGIE Fabricom enjoys international acclaim in the field of ‘Piping & Mechanical’. Thanks to our extensive know-how and experience in project management, we have won our spurs in the most critical, complex and urgent projects. Backed by our network of workshops and construction sites, we provide you with nothing less than flawless project support.
Regarding the maintenance of technical installations, ENGIE Fabricom offers a complete range of tailor-made “all-in” services. Our maintenance specialists are at your disposal, to offer you, besides their expertise, also an unparalleled customer service. Day by day, you can count on our teams to ensure optimum availability and performance of your installations, in accordance with the environment and safety regulations applicable.
Thanks to many years of experience, gained in both projects and series, we are in an excellent position to develop an appropriate solution for any industrial panel construction project. We always strive to strike the optimum balance between price, quality, reliability and service. ENGIE Fabricom holds one of the few Schneider licences in the Benelux for “type-tested” Okken switchboards.
> Installation of mechanical equipment and piping
> Piping prefabrication, skid and module construction
> Modular (PAU, PAR, PAT, coldboxes) and steel structures
> Fully equipped mechanical workshops
> Hot and cold pipe bending workshop
> Underground and surface pipelines
> Plastic piping and equipment
> Adjustment, tuning and alignment of mechanical equipment
> Sprinkler systems
> High Purity Contracting and realisation of clean utilities
> Nuclear piping (ASME II welding)
Customized solutions
Electromechanical equipment : Power and distribution cabinets, switching cabinets and control panels
Series production
Assembly of both large and small series of automation panels and control cabinets for overall use
Specific competencies
> Basic and detailed engineering for panel and cabinet construction
> Okken cabinets MCC (4 000 A – 100 kA) / PCC (6 300 A – 150 kA)
> Prisma Plus cabinets (PTTA) up to 3 200 A – form 3, ICC : 85 kA
> Prisma GX Plus cabinets
> Automation, motor controls, ...
> Pneumatic distribution cabinets
> Metal structures : boxes, control desks, synoptic panels, …
> Engraving department
Result : A minimal Total Cost of Ownership
> Maintenance consulting, engineering, contracting and operation
> Integrated industrial maintenance of complete or partial installations, at operational, tactical or strategic level
> Various “Total Maintenance” concepts :
- Total plant or multi-site approach
- MORE (Maintenance Of Rotating Equipment)
> Maintenance of industrial boilers
> A wide range of specialist maintenance services :
- Servicing and maintenance of valves and rotating equipment
- Measurement and control services
- Instrumentation and calibration
- Analyser systems
© E
NG
IE F
abric
om |
4794
| 03
/201
5 | E
dite
ur re
spon
sabl
e | E
mm
anue
lle A
dam
YouTube
HEADQUARTERSBoulevard Simón Bolívarlaan 34 - 1180 Brussels - BELGIUMtel. + 32 2 370 31 11 - fax + 32 2 332 24 [email protected]
AARTSELAARKontichsesteenweg 25 - 2630 Aartselaar - BELGIUMtel. + 32 3 870 12 11 - fax + 32 3 887 12 98
ANSRue des Anglais 7 - 4430 Ans - BELGIUMtel. + 32 4 338 87 87 - fax + 32 4 336 50 78
FLEURUSChaussée de Gilly 263 - 6220 Fleurus - BELGIUMtel. + 32 71 24 25 00 - fax + 32 71 39 34 31
GENKHenry Fordlaan 33 - Genk Zuid-Zone 11 - 3600 Genk - BELGIUMtel. + 32 89 57 51 11 - fax + 32 89 57 51 10
ZWIJNDRECHTVitshoekstraat 5 - Haven 1036 - 2070 Zwijndrecht - BELGIUMtel. + 32 3 543 71 11 - fax + 32 3 543 71 01
ANTWERPENScheldelaan 414 - Haven 507 - 2030 Antwerpen - BELGIUMtel. + 32 3 543 71 00 - fax + 32 3 543 71 79
DELSTELDONKSkaldenstraat 62 - 9042 Delsteldonk - BELGIUMtel. + 32 9 239 85 90 - fax + 32 9 239 85 40
Quality, Well-being and SafetyQuality is an integral part of the corporate culture at ENGIE Fabricom. ENGIE Fabricom complies fully with International Standard ISO9001 and is VCA-P certifi ed. Safety, health and well-being are top priorities for us.
EnvironmentENGIE Fabricom is making a conscious effort to minimize its impact on the environment at all levels through continuous evaluation and improvement.
ProximityOur employees are based at various operational centres throughout Belgium, enabling us to further improve our relationships and partnerships with our customers.
