PALIFT - Drive · PDF fileThe PALIFT HOOKLIFT — How does it work? The key word is “simple”. The operator backs the truck toward the container. With the in-cab controls, the

The Pal� nger product was developed during the early 70’s and has found uses in the following applications and industries:

• Solid and liquid waste removal • Demolition • Scrap metal and recycling • Landscaping • Agricultural • Municipal • Fire brigade • Military

The main reason why the hookloader has found such wide and broad appeal is that the system allows an unparalleled degree of VERSATILITY and ef� ciency

• More containers can be handled in a shorter amount of time • With a variety of container style one truck can do the work of several

2 www.driveproducts.com

PALIFT — THE INNOVATIVE VERSATILE CONTAINER TRANSFER SYSTEM

The PALIFT HOOKLIFT — How does it work?The key word is “simple”. The operator backs the truck toward the container. With the in-cab controls, the operator switches on the power take-off, lowers the hydraulic arm and engages the container with the hook. He then activates the two main cylinders that pull the container onto the chassis and lock it into position. The operator then turns off the power take-off and drives away. It takes less than one rninute from the time the operator shifted the truck into reverse. The PALIFT has one major purpose: To help our customers pick-up, drop-off, transport, unload or dump containers, or equipment safer and faster - and that means larger pro� ts. One of the main features is the driver never leaves the cab - this increases productivity and safety.

Other PALIFT features:

• A sliding or articulating jib • Dual main cylinders • In-cab pneumatic or electric controls • A direct mount “PARKER” piston pump • JIC � ttings and hoses • 3-year warranty / main steel component

FEATURES AND BENEFITSSINGLE VERSUS DUAL POINTS OF ARTICULATION

• All PALIFT hoists feature DUAL POINTS OF ARTICULATION. • In addition to the pick-up/set-off mode the PALIFT features a separate dump-mode. • With single articulation hoists the container moves rearward when clumping and often hits the ground before a full dump angle is

reached.

DUAL SERIES JIBSThe PALIFT features both manually or hydraulicallyadjustable jibs enabling the driver to pick-up containers withdifferent height A-frames.

HOOK VERSUS CABLE • Automatic pick-up meaning that the driver does not have to leave the cab to engage or disengage with a

container. • The hook is operated from inside the cab where the driver is SAFE. • The hook hoist has fewer parts and requires less maintenance than a cable hoist. • The PALIFT hoist provides power-on and power-off through the use of hydraulic cylinders. Containers are easily

loaded onto docks and trailers. • The hooklift operators can approach and connect with a container within a 60° arc.

3www.driveproducts.com

FEATURES


HAS SERIES10,000 lb. – 20,000 lb. capacity

HIGHLIGHTS

• Simple design for easy operation and lower cost.

• Stable dual main cylinders and sliding jib.

• User friendly, automatic pickup, can pick up container up to 30˚ either side of center.

• Inside controls for safe, ef� cientoperation.

• Designed and manufactured in the US.

Hoist Model Min. CA/CT Platform Length Min. GVWR Min. F/R Susp. Min RBM

HAS 100 S 84” - 96” CA 126” 17,500 lb. 6K / 13.5K 500,000 in. lb.

HAS 100 L 96” - 108” CA 144” 17,500 lb. 6K / 13.5K 500,000 in. lb.

HAS 100 S SD 84” aft tank 132” 17,500 lb. 6K / 13.5K 500,000 in. lb.

HAS 100 L SD 108” aft tank 156” 17,500 lb. 6K / 13.5K 500,000 in. lb.

HAS 150 108” - 120” CA 156” 19,500 lb. 6K / 13.5K 500,000 in. lb.

HAS 200 SS 108” - 120” CA 156” 26,000 lb. 8K / 18K 900,000 in. lb.

HAS 200 S 120” CA 155” 26,000 lb. 8K / 18K 900,000 in. lb.

HAS 200 M 120” - 130” CA 178” 26,000 lb. 8K / 18K 900,000 in. lb.

HAS 200 L 130” - 140” CA 182” 26,000 lb. 8K / 18K 900,000 in. lb.

CHASSIS SPECIFICATIONS:

SPECIFICATIONS:

Model 100 S 100 L 150

Capacity 10,000 lb. 10,000 lb. 15,000 lb.

Container Length 10’ - 12’ 11’ - 13’ 12’ - 14’

Jib Height 36 ¼” 36 ¼” 36 ¼”

Dump Angle 50º - 38º 52º - 46º 52º - 43º

Operating Pressure 2,800 psi 2,800 psi 2,800 psi

Model 200 SS 200 S 200 M 200 L

Capacity 20,000 lb. 20,000 lb. 20,000 lb. 20,000 lb.

Container Length 10’ - 14’ 10’ - 14’ 12’ - 15’ 12’ - 16’

Jib Height 36 ¼” 54” 54” 54”

Dump Angle 54º - 43º 54º - 43º 50º - 42º 50º - 42º

Operating Pressure 2,800 psi 2,800 psi 2,800 psi 2,800 psi

FEATURES


HAD SERIES13,000 lb. – 50,000 lb. capacity

HIGHLIGHTS

• Dual pivot design provides unrestricted full angle dumping.

• Stable dual main cylinders with sliding jib to accommodate short containers and adjust weight distribution.

• Patented “� oating jib” eliminates all electrical or hydraulic valve dump latch interlocks.

• User friendly in cab controls, automatic pickup and power on/ power off operation.



HAD 130 S 84” - 96” CA 130” 19,500 lb. 6K / 13.5K 500,000 in. lb.

HAD 130 L 108” - 120” CA 140” 19,500 lb. 6K / 13.5K 500,000 in. lb.

HAD 185 120” - 130” CA 150” 26,000 lb. 8K / 18K 900,000 in. lb.

HAD 200 M 120” - 130” CA 158” 26,000 lb. 8K / 18K 900,000 in. lb.

HAD 200 L 130” - 140” 181” 26,000 lb. 8K / 18K 900,000 in. lb.

HAD 500 185” - 195” CT 253” 64,000 lb. 18K / 46K 2,750,000 in. lb.


SPECIFICATIONS:

Model 130 S 130 L 185

Capacity 13,000 lb. 13,000 lb. 18,500 lb.


Jib Height 36 ¼” 36 ¼” 36 ¼, 54”

Dump Angle 58º 54º 58º


Model 200 M 200 L 500

Capacity 20,000 lb. 20,000 lb. 50,000 lb.


Jib Height 54” 54” 61 ¾”



FEATURES


HAD 250/30025,000 lb. – 30,000 lb. capacity

HIGHLIGHTS

• Dual pivot design provides unrestricted full angle dumping.

• Stable dual main cylinders with sliding jib to accommodate short containers and adjust weight distribution.

• Patented “� oating jib” eliminates all electrical or hydraulic valve dump latch interlocks.

• User friendly in cab controls, automatic pickup and power on/power off operation.


Hoist Model Min. CA Min CT Platform Length Min. GVWR Min. F/R Susp. Min RBM

HAD 250 S 132” - 140” CA N/A 183” 33,000 lb. 12K / 21K 1,000,000 in. lb.

HAD 250 M 160” - 170”CA N/A 203” 33,000 lb. 12K / 21K 1,000,000 in. lb.

HAD 300 S N/A 126” - 132” CT 183” 52,000 lb. 12K / 40K 1,500,000 in. lb.

HAD 300 M N/A 148” - 154” CT 203” 52,000 lb. 12K / 40K 1,500,000 in. lb.


SPECIFICATIONS:

Model 250 S 250 M

Capacity 25,000 lb. 25,000 lb.

Container Length 12’ - 16’ 14’ - 18’

Jib Height 54” 54”

Dump Angle 56º 39º

Operating Pressure 2,800 psi 2,800 psi

Model 300 S 300 M



Jib Height 61 ¾” 61 ¾”



FEATURES


Model 09 S 09 L



Jib Height 36 ¼” 36 ¼”


Recommended Dimensions (in)

CA (4 x 2) 60 84

CT (6 x 4) N/A N/A

Recommended GVW Rating (lbs) 14,500 14,500

C 09 9,000 lb. capacity

SPECIFICATIONS: • A versatile, indespensable machine • 36-1/4” pick up bar height • Articulating jib • Jib hook equipped with safety latch • Single jib cylinder equipped with single counterbalance valve and single tipping cylinder equipped with dual counterbalance valve

• Jib interlock • 6-1/4” subframe height • Dual lever in cab electric controls • Direct Mount Axial Piston Pump


C 09 S 60” CA 100” 14,500 lb. 5K / 9.5K 400,000 in. lb.

C 09 L 84” CA 120” 14,500 lb. 5K / 9.5K 400,000 in. lb.


FEATURES


T 1212,000 lb. capacity

SPECIFICATIONS:

Model T 12 S T 12 L






CA (4 x 2) 84 108

CT (6 x 4) N/A N/A


• Maximum payload for small trucks • 36-1/4” pick up bar height • Sliding jib • Single jib cylinder equipped with single counterbalance valve and single tipping cylinder equipped with dual counterbalance valve

• Jib interlock • 6-1/4” subframe height • Dual lever in cab electric controls • Direct mount axial Piston pump and aluminum valve body and junction box cover


T12 S 84” CA 132” 18,000 lb. 6K / 12K 500,000 in. lb.

T 12 L 108” CA 148” 18,000 lb. 6K / 12K 500,000 in. lb.


FEATURES



T16 S 108” - 120” CA 148” 24,000 lb. 8K / 16K 750,000 in. lb.

T 16 M 130” - 140” CA 175” 24,000 lb. 8K / 16K 750,000 in. lb.


T 16 16,000 lb. capacity

HIGHLIGHTS

• High strength to weight ratio

design

• Dual lift cylinders for added

strength and stability

• Sliding jib to accommodate

short containers and adjustment

weight distribution

• Electric 2 speed in cab controls

SPECIFICATIONS:

Model T16 S T16 M






FEATURES


T 18.5 M18,500 lb. capacity

• Designed for non CDL Chassis applications

• 54” pick up bar height • Single jib cylinder equipped with single counterbalance valve and dual tipping cylinders equipped with dual counterbalance valve

• Jib interlock • 7.87” subframe height • Dual lever 2 speed in cab electric controls

• Direct mount axial Piston pump and aluminum valve body and junction box cover

SPECIFICATIONS:

Model T 18.5

Capacity 18,500 lb.

Container Length 12’ - 16’

Jib Height 54”

Dump Angle 54º


CA (4 x 2) 130 - 140

CT (6 x 4) N/A

Recommended GVW Rating (lbs) 26,000


T 18.5 M 130” - 140” CA 184” 26,000 lb. 8K / 18K 900,000 in. lb.


FEATURES



HIGHLIGHTS

• High strength to weight ratio design; containers from 11’- 18’ all with full 50° dump angle

• Dual series hydraulically actuated 54” and 36-1/4”jib; dual point articulation

• Dual lift cylinders for added strength and stability;

• Sliding jib to accommodate short containers and adjustment of weight distribution

• Electric 2 speed in cab controls • Safety interlocks prevent accidental

disengagement of dump locks and dumping a container if the dump locks are not fully engaged.

SPECIFICATIONS:

Model T24 MT T24 L



Jib Height 36” & 54” 54”



Model T 24 S T 24 ST T24 M

Capacity 24,000 lb. 24,000 lb. 24,000 lb.


Jib Height 54” 36” & 54” 54”




T 24 S 110” - 120” 170” 33,000 lb. 12K / 21K 1,000,000 in. lb.

T 24 ST 110” - 120” 170” 33,000 lb. 12K / 21K 1,000,000 in. lb.

T 24 M 130” - 140” 182” 33,000 lb. 12K / 21K 1,000,000 in. lb.

T 24 MT 130” - 140” 182” 33,000 lb. 12K / 21K 1,000,000 in. lb.

T 24 L 150” - 160” 205” 33,000 lb. 12K / 21K 1,000,000 in. lb.


FEATURES


T 30 30,000 lb. capacity

Model T 30 S T 30 L




Jib Height 54” / 61 ¾” 54” / 61 ¾”


CA (4 x 2) 120 - 130 N/A

CT (6 x 4) 115 - 125 150 - 160


• A solid entry into the heavy-duty class• Dual series 54” and 61-3/4” pick up bar

heights• Sliding jib • Single jib cylinder equipped with

single counterbalance valve and dual tipping cylinders equipped with dual counterbalance valve

• Jib interlock• 8.7” subframe height• Dual lever 2 speed in cab electric over air

controls• Direct mount axial Piston pump and

aluminum valve body and junction box cover


T 30 S 115” - 125” CT 172” 50,000 lb. 12K / 38K 1,500,000 in. lb.

T 30L 150” - 160” CT 231” 50,000 lb. 12K / 38K 1,500,000 in. lb.


FEATURES



HIGHLIGHTS

• Dual series jib

• Formed “Z“ rail main frame yields

high strength to weight ratio

• Tandem rear rollers

• Optional, rear roller stabilizer


SPECIFICATIONS:

Model 40 S 40 L



Jib Height 54” / 61 ¾” 54” / 61 ¾”




T 40 S 135” - 145” 212” 54,000 lb. 14K / 40K 2,000,000 in. lb.

T 40 L 180” - 190” 253” 54,000 lb. 14K / 40K 2,000,000 in. lb.

FEATURES


T 50 / T 6050,000 lb. / 60,000 lb. capacity

HIGHLIGHTS

• Dual series jib

• Formed “Z“ rail main frame yields

high strength to weight ratio

• Tandem rear rollers

• Rear roller stabilizer, standard on

• T 60, optional on T 50


T 50 185” - 195” CT 253” 64,000 lb. 18K / 46K 2,750,000 in. lb.

T 60 185” - 195” CT 253” 64,000 lb. 20K / 46K 2,750,000 in. lb.

SPECIFICATIONS:

Model T 50 T 60



Jib Height 54” / 61 ¾” 54” / 61 ¾”


Controls Electric over air, 2 Speed Electric over air, 2 Speed

Container Rail Width 36 ½” - 37 ¼” 36 ½” - 37 ¼”

Pump Piston, direct mount

Piston, direct mount

Dump Interlock Electric, proximity switch

Electric, proximity switch



FEATURES


SPECIFICATIONS:

G 6868,000 lb. capacity

HIGHLIGHTS

• Industries highest capacity hoists

• Industries only semi trailer hooklift

• Only hooklift to handle containers

up to 40‘ in length

Model G 68 G 68 H*Capacity 68,000 lb. 68,000 lb.Container Length 18’ - 23’ 22’ - 30’

Jib Height 61 ¾” 61 ¾”

Dump Angle 47º 45ºOperating Pressure 4,500 psi 4,500 psiRecommended Chassis Straight truck Semi TrailerRecommended CT 195” - 205” N/A

Model G 68 HA G 68 HAXCapacity 68,000 lb. 68,000 lb.


Jib Height 61 ¾” 61 ¾”Dump Angle 45º 45ºOperating Pressure 4,500 psi 4,500 psiRecommended Chassis Semi Trailer Semi TrailerRecommended CT N/A N/A

Note(*): Intended for double trailers when using maximum of 28’ containers



G 68 (spec order) 195” - 205” CT 272” 66K to 86,000 lb. 20K / 46K 2,750,000 in. lb.

ROLL∙RITE DC SeriesTARP OPTIONS

For Trucks Using up to 30 feet of Tarp...TarpMaster® Gear Motor w/ 98” Tarp Spool with Integrated Housing, Adjustable Tower Adjusts 60” to Height of 117”, Super Tough Mesh Tarp, Tie-down Accessories & Hardware, Wireless Power Pack: Single Valve Hydraulic Pump w/Black Box™ Remote Controls, 2 Keyfobs w/Retractable Keyfob ClipsEstimated System Weight: 535lbs

DC203™

For Trucks Using up to 26 feet of Tarp...External Pivot Set. TarpMaster® 98” Tarp Spool with Integrated Housing, Adjustable Tower, Single Valve Hydraulic Pump w/Black Box™ Remote Controls, 2 Keyfobs w/ Retractable Keyfob Clips, Wide Tarp Bow SetEstimated System Weight: 550lbs

HIGH PERFORMANCE, LOW MAINTENANCE AUTO TARPERS

FIT YOUR TRUCK ON A BUDGET

Roll-Rite roll off tarp systems feature cylinder free and polished aluminum arm pro� les resulting lower replacement and labour costs.

Roll-Rite’s patented sliding pivot (On selected DC-Series models) accommodates both new and old style roll-off and hook lift vehicles.

Roll-Rite tarping systems are designed to � t the rugged and demanding needs of roll-off trucks and trailers. You can combine stationary and adjustable features on the DC-Series Tarp systems for any variation that best suits your budget and requirements.

DC100™ ARMLESS



DC350 SERIES TARPERSFor Trucks Varying Sized Containers Using up to 30 feet of Tarp...Patented Sliding Pivot Set. Super Duty Gear Motor with 98” Tarp Spool with Integrated Housing, Adjustable Tower, Super Tough Mesh Tarp, Wireless Power Pack with Black Box™ Remote Control 2 Keyfobs w/Retractable Keyfob Clips, Wide Tarp Bow SetEstimated System Weight: 800lbs

DC350 sliding pivot features all new spring-driven pivot with 6-springs in a narrow 3” pro� le

Tower Rests at height of average 20yd containerand extends 36” (Integrated Housing)

Pre-wired Black Box™ Wireless Control with Electric-over-Hydraulic Power Pack

Versatile pivot range with 180º arm rotation. Gear-driven spring pivot combined with patented sliding mechanism allows 20 in. of travel to easily accommodate 20-, 30- and 40-yd containers. Narrow pro� le (above) meets 108” outside mounting requirements when mounted on outside of fender.

SUPER TOUGH MESH • Premium 16 oz Heavy Weight Woven Mesh

made of 7,500 denier strands of UV resistant polypropylene

• 7x7 weave breathes enough to minimize � apping • UV protected strands • Heavy duty 2” binder and seat-belt webbing front

& rear to prevent fraying and tearing

PREMIUM HD MESH • Premium 15 oz material features a 6x6 fully

PVC coated weave with three-1300 denier high tenacity polyester threads that form a single 3900 denier strand

• Comparable tensile strength to our Super Tough mesh with less weight provides maximum performance for automated tarping demands

• 10X more puncture resistant than SuperTough means superior coverage appearance with less debris protrusions

• Heavy duty 2” binder and seat-belt webbing front & rear to prevent fraying and tearing


DC400 SERIES TARPERSFor Trucks with Similar Sized Containers Using up to 30 feet of Tarp...Patented Roller-Bearing Stationary Pivot Set. Super Duty 98” Tarp Spool with Integrated Housing, Adjustable Tower, Super Tough Mesh Tarp, Wireless Power Pack with Black Box™ Remote Control 2 Keyfobs w/Retractable Keyfob Clips, Wide Tarp Bow SetEstimated System Weight: 600lbs

Powder Coat Finished Tower Rests at height ofaverage 20yd container and extends 36”

Pre-wired Black Box™ Wireless Control with Electric-over-Hydraulic Power Pack

Two 6-spring greasable Roller Bearing Stationary Pivots

4” Halogen worklights are standard

SUPER TOUGH MESH • Premium 16 oz Heavy Weight Woven Mesh

made of 7,500 denier strands of UV resistant polypropylene

• 7x7 weave breathes enough to minimize � apping • UV protected strands • Heavy duty 2” binder and seat-belt webbing front

& rear to prevent fraying and tearing

PREMIUM HD MESH • Premium 15 oz material features a 6x6 fully

PVC coated weave with three-1300 denier high tenacity polyester threads that form a single 3900 denier strand

• Comparable tensile strength to our Super Tough mesh with less weight provides maximum performance for automated tarping demands

• 10X more puncture resistant than SuperTough means superior coverage appearance with less debris protrusions

• Heavy duty 2” binder and seat-belt webbing front & rear to prevent fraying and tearing

AVAILABLE OPTIONS


Larger 12” head sheave to improve cable life Dual front locks

Removable side roller pin, secured by single bolt

70 gallon hydraulic tank with side mounted brackets

50 GPM valve separate control stand

Pump with 2 ½“gear and a 2“ suction line, and a T-Bolt clamp

Universal cable hook

Optional Control Tower with air two lever controls, PTO switch and body up light

Subframe � ush mounted

Subframeless hoist features less weight 60 gallon hydraulic tank mounted on tubular bracket with dual � lters

Full width rear roller reduces wear on tail

Hinge recessed into truck chassis, full width hinge shaft (1) piece construction Muncie Power Take Offs Optional Rear & Side Vew Safety

Systems

Optional ToolboxesOptional Custom Radio Controls

Optional LED Lighting

Interchangeable cable sheaves with high strength aluminum bronze bushings

50 GPM valve mounted on oil tank

Dual spring loaded pull through front locks Removable side roller pin, secured by

single bolt


AVAILABLE OPTIONS


NOTES


NOTES


NOTES

BR

-DP_

Palfi

nger

HkL

fts-

061

3-0

1

Documents

PALIFT - Drive · PDF fileThe PALIFT HOOKLIFT — How does it work? The key word is “simple”. The operator backs the truck toward the container. With the in-cab controls, the