Paginas02-13 - TECHMO, Construction Products · - System autoanclables sheets to concrete Prepufe System - Vapor barriers. - Paint asphalt, rubber asphalt paints. - Prints draining

Presentation

STRUCTURAL REINFORCEMENT- Carbon fiber.- Resins.- Repair mortars.- Injection resins.

STUFFED AND ANCHORS- Resins- Expandable Mortar Grout.- Polyester resins, epoxy acrylates, etc..

JOINTS- Polyurethane caulk.- Fund board.- Primers.- Silicones.- Polyurethane Foams

BUILDING PRODUCTS MORTARS- Bonding slurry.- Resins permanent tack.- Mesh mortar.- Latex.- Plasticizer-air entraining.- Water-repellent.

ALL KINDS OF MORTAR- Mortars Theming.- Refractory Mortars.- Mortars monolayer.- Mortar grouting.- Mortars Cola

- Mortars Grouts, Expandable, Anchorage, Fillers.- Mortars Microhormigones.- Repair Mortars.- Self-leveling mortars.- Mortars Waterproofing.

Concrete and MORTAR- Curators.- Waterproofing.- Release agents.- Versatile.- Superplasticizer.- Accelerators.- Retardants.- Silica fume.- Corrosion inhibitors.- Self-leveling.- Plasticizers.- air-entraining- Lightweight aggregates.- Polystyrene beads.

VARIOUS- Geotextiles.- Products antigrafittis.- Degreasers.

Here are the different families of products we sell with the most competitive prices, commercial and technical advice on site and logistics based on experience.

THERMAL, ACOUSTIC INSULATION AND REFLECTIVE- Plate heat-reflective.- Rock wool.- Glass wool.- Extruded and Expanded Polystyrene.- Prints Anti-impact.

PASSIVE FIRE PROTECTION- Mortars Fireproof, intumescent coatings, fire protection plates.- Sealing systems for installations, putty pads, grills, collars.- System protection and manufacturing exhaust ventilation ducts.- Pipeline systems for conducting wires.- Systems divisions (partitions, ceilings continuous, meeting bands, protecting floors, etc ...).- Fire doors, firewall logs, firewall fixed, etc.

PAVEMENT- Polyurethane Flooring Systems.- Systems epoxies pavings.- Stamped concrete, concrete spray 3mm layer printed walking.- Concrete products fratasados: pigments, silicas, Coridon,fibers, curators, etc..- Self-leveling Mortars: pedestrian and industrial.- Diamond cutting discs. Cortes murals. Saca witnesses.- Slurys acrylics, epoxies and asphalt.- Rubber Flooring, slurrys.- Flooring aggregates seen, deactivating.- Aggregate Binders.- Asphalt pavements, asphalt slurrys.- Resins flooring protection.- Wearing courses, aggregates, silica, corundum, marble

WATERPROOFING- Asphalt sheets.- Print PVC.- Plate EPDM.- Waterproofing Paints, acrylic paints, rubber, antigoteras. polyurethanes- Waterproofing system polyurethane paint.- Bithutene. Adhesive films.- Fishnet painting.- Bituminous emulsions- Primers repellent for facades and floors.- Primers oleo-repellent soils and facades.

FOUNDATION- Prints PVC.- System autoanclables sheets to concrete Prepufe System- Vapor barriers.- Paint asphalt, rubber asphalt paints.- Prints draining.

- Asphalt sheets.- Geogrids.- Geotextiles.- PVC Tapes concreting.- Profiles hidroexpansivos.- Separators.

POOLS AND DEPOSITS- Mortars tail.- Mortars flexible tail.- Ceramic grouts.- Waterproofing mortars.- Mastic joint sealing.- Profiles hidroexpansivos.- PVC Tapes concreting.- Repair mortars for coving.- Sealing of sprats: Rivestop, resins.- Resins and sealants to repair cracks and ceramic stuck underwater.- Water-repellent glass for concrete.- Anchoring and bonding resins.

CONCRETE, TUNNELS AND EMBANKMENTS- Bridging.- Polypropylene fibers and steel, structural fibers.- Additives superplasticizer.- Plastifiers.- Air-entraining agents.- Self-Leveling Additives- Waterproofing Additives- Polyfunctional additives- Accelerators for shotcrete. Stabilizers.- Nanosílices and silica fume.- Pigments.- Resins anchors.- Geogrids and geotextiles.- Release agents.- Separators.- Paintings carbonation.

BRIDGES- Support points: Wetsuits.- Waterproofing Products: Bridge decks.- Meetings of boards.- Resins anchors.- Products related to concrete for bridges.- Paintings carbonation.- Release agents.- Separators.- Additives.- Paintings carbonation.

2

STRUCTURAL REINFORCEMENT- Carbon fiber.- Resins.- Repair mortars.- Injection resins.

STUFFED AND ANCHORS- Resins- Expandable Mortar Grout.- Polyester resins, epoxy acrylates, etc..

JOINTS- Polyurethane caulk.- Fund board.- Primers.- Silicones.- Polyurethane Foams

BUILDING PRODUCTS MORTARS- Bonding slurry.- Resins permanent tack.- Mesh mortar.- Latex.- Plasticizer-air entraining.- Water-repellent.

ALL KINDS OF MORTAR- Mortars Theming.- Refractory Mortars.- Mortars monolayer.- Mortar grouting.- Mortars Cola

- Mortars Grouts, Expandable, Anchorage, Fillers.- Mortars Microhormigones.- Repair Mortars.- Self-leveling mortars.- Mortars Waterproofing.

Concrete and MORTAR- Curators.- Waterproofing.- Release agents.- Versatile.- Superplasticizer.- Accelerators.- Retardants.- Silica fume.- Corrosion inhibitors.- Self-leveling.- Plasticizers.- air-entraining- Lightweight aggregates.- Polystyrene beads.

VARIOUS- Geotextiles.- Products antigrafittis.- Degreasers.

3

THERMAL, ACOUSTIC INSULATION AND REFLECTIVE- Plate heat-reflective.- Rock wool.- Glass wool.- Extruded and Expanded Polystyrene.- Prints Anti-impact.

PASSIVE FIRE PROTECTION- Mortars Fireproof, intumescent coatings, fire protection plates.- Sealing systems for installations, putty pads, grills, collars.- System protection and manufacturing exhaust ventilation ducts.- Pipeline systems for conducting wires.- Systems divisions (partitions, ceilings continuous, meeting bands, protecting floors, etc ...).- Fire doors, firewall logs, firewall fixed, etc.

PAVEMENT- Polyurethane Flooring Systems.- Systems epoxies pavings.- Stamped concrete, concrete spray 3mm layer printed walking.- Concrete products fratasados: pigments, silicas, Coridon,fibers, curators, etc..- Self-leveling Mortars: pedestrian and industrial.- Diamond cutting discs. Cortes murals. Saca witnesses.- Slurys acrylics, epoxies and asphalt.- Rubber Flooring, slurrys.- Flooring aggregates seen, deactivating.- Aggregate Binders.- Asphalt pavements, asphalt slurrys.- Resins flooring protection.- Wearing courses, aggregates, silica, corundum, marble

WATERPROOFING- Asphalt sheets.- Print PVC.- Plate EPDM.- Waterproofing Paints, acrylic paints, rubber, antigoteras. polyurethanes- Waterproofing system polyurethane paint.- Bithutene. Adhesive films.- Fishnet painting.- Bituminous emulsions- Primers repellent for facades and floors.- Primers oleo-repellent soils and facades.

FOUNDATION- Prints PVC.- System autoanclables sheets to concrete Prepufe System- Vapor barriers.- Paint asphalt, rubber asphalt paints.- Prints draining.

- Asphalt sheets.- Geogrids.- Geotextiles.- PVC Tapes concreting.- Profiles hidroexpansivos.- Separators.

POOLS AND DEPOSITS- Mortars tail.- Mortars flexible tail.- Ceramic grouts.- Waterproofing mortars.- Mastic joint sealing.- Profiles hidroexpansivos.- PVC Tapes concreting.- Repair mortars for coving.- Sealing of sprats: Rivestop, resins.- Resins and sealants to repair cracks and ceramic stuck underwater.- Water-repellent glass for concrete.- Anchoring and bonding resins.

CONCRETE, TUNNELS AND EMBANKMENTS- Bridging.- Polypropylene fibers and steel, structural fibers.- Additives superplasticizer.- Plastifiers.- Air-entraining agents.- Self-Leveling Additives- Waterproofing Additives- Polyfunctional additives- Accelerators for shotcrete. Stabilizers.- Nanosílices and silica fume.- Pigments.- Resins anchors.- Geogrids and geotextiles.- Release agents.- Separators.- Paintings carbonation.

BRIDGES- Support points: Wetsuits.- Waterproofing Products: Bridge decks.- Meetings of boards.- Resins anchors.- Products related to concrete for bridges.- Paintings carbonation.- Release agents.- Separators.- Additives.- Paintings carbonation.

Presentation

Index

4

PRODUCT PAGE

Index

5

Index

6

For any questions please contact our

Technical Department

Product Family Index

SEALING PRODUCTS

POLYURETHANE MASTICS- Techmoflex 11 PS- Techmoflex Industria- Techmoflex Hidroexpansivo

SILICONES- Techmosil Neutra- Techmosil Acética

POLYURETHANE FOAM- Techmo Expand N750- Techmo Expand P750- Techmo Expand Tejas- Techmo Expand Limpiador

Sealing Systems- Techmocinta PVC E- Techmoperfil Hidroexpansivo P- Techmoperfil Hidroexpansivo Salina WH- Techmo Sellastop Spadín- Techmo Cordón Asfáltico- Techmo Asfalt Sellador- Techmo Barrera Vapor

Complementary Products- Fondos de Juntas- Techmo Primer 1

121212

- Techmonotop Cosmetic R2- Techmonotop 700 Fix

WATERPROOFING- Techmoseal 531- Techmoseal 553 IMP- Techmoseal 531 IMP- Techmoseal 550 Super Elastic 2C- Techmoseal 550 IMP- Techmoseal 573 Mortero Rápido- Techmoseal 573 Mortero Rápido R2- Techmoseal 511 Red Capilar- Techmoseal Adición

STUFFED, ANCHORS, EXPANDABLE GROUT- Techmo Grout 21- Techmo Grout 21 Construcción- Techmo Grout 51- Techmo Grout 51 Construcción- Techmo Grout 55 Fast- Techmo Grout 55 Fast Black- Techmo Grout Filler

LEVELING- Techmo Level 180- Techmo Level 250- Techmo Level 280- Techmo Level 300 IFS- Techmo Level 355

TILE ADHESIVES- Techmocol MC- Techmocol MC 100- Techmocol MC 200- Techmocol MC 301- Techmocol Flex MC 501 Blanco- Techmocol Flex MC 401- Techmocol Termoacústico- Techmocol Flex MC 601- Techmocol MC Escayola- Techmocol MC Yeso- Techmocol MC Exterior Capa Gruesa- Techmocol MC 331

DRY MORTAR- Techmorsec M-7,5- Techmorsec M-7,5 Fino- Techmorsec M-10- Techmorsec M-25- Techmorsec M-30 SR

MICROCONCRETE- Techmocret HA-25 Blanco- Techmocret HAC-45- Techmocret HA-30

MORTAR GROUTING- Techmojunt

MONOCAPA- Techmonocapa Acabado Fino- Techmococapa Acabado Piedra- Techmonocapa Acabado Raspado

THEMING MORTAR- Techmo Artek 1

REFRACTORY MORTAR- Techmo Refrac

7

PRINTED MORTAR

PAGE

PRINTED MORTAR- Techmocrom Impreso- Techmocrom Impreso Basic

1212

12121212

13131313131313

1313

RESINS

STUFFED AND ANCHORS- Techmofix 1000- Techmofix 2000- Techmofix 3000- Techmofix 4000- Techmodur Anclajes- Techmodur Masilla Polivalente- Techmodur Masilla Polivalente Hydro

BRIDGES OF UNION- Techmodur Lechada de Adherencia- Techmodur Unión 31- Techmodur Unión 32F- Techmodur Unión 32N- Techmodur Latex- Techmodur Latex S360- Techmodur Resin A-500

INJECTION- Techmodur Inyección- Techmodur Inyección Aquareactiva Flex- Techmodur Inyección Aquareactiva

14141414141414

14141414151515

151515

ARMOUR PROTECTIONARMOUR PROTECTION

- Techmonotop 610 Pasivante- Techmoepox 615 Pasivante 2C

1515

MORTAR

REPAIR- Techmodur 40 Mortero Reparación- Techmonotop 693- Techmonotop 692 Fluid- Techmonotop 693 Constucción- Techmonotop 694 Construcción- Techmonotop 699- Techmonotop 699 Construcción- Techmonotop 695 Fast- Techmonotop 696 SFG- Techmonotop Cosmetic

16161616161616161616

1616

171717171717171717

1 71 81 81 81 81 81 8

1 81 81 81 81 8

1 91 91 91 92020202020202020

2222222222

222222

22

232323

23

23

2424


8

SCREED MORTAR- Techmocrom Screed

RELEASE AGENTS- Techmocrom Desmoldeante- Techmocrom Desmoldeante Basic

MOLDS- Techmocrom Moldes

PROTECTIVE RESIN- Techmocrom CM-ESP Brillante- Techmocrom CM Mate- Techmocrom EBT- Techmocrom FRC

- Techmofrol 100- Techmofrol EPA- Techmofrol Mineral- Techmofrol Vegetal 110- Techmofrol Vegetal 111- Techmofrol Vegetal 112 Ecológico- Techmofrol Cera- Techmofrol Rápido

WATERPROOFING- Techmofuge P- Techmofuge 1- Techmofuge 1 ADMIX- Techmofuge 1 Precast- Techmofuge 2 Precast- Techmofuge HI- Techmofuge N

POLYFUNCTIONAL- Techmoment 920- Techmoment 928 GV- Techmoment 930- Techmoment 932- Techmocrete 1001- Techmocrete 1002- Techmocrete 1003- Techmocrete 1004- Techmocrete 1005

PLASTICIZERS- Techmocem W 90- Techmocem 2- Techmoprecast P00- Techmoprecast P18- Techmoprecast P22- Techmoprecast P31

SUPERPLASTICIZERS- Techmocem 120- Techmocem 200R- Techmocem 204R- Techmocem 205- Techmocem 500- Techmocrete C703- Techmocrete C704- Techmocrete CS704- Techmoprecast S10- Techmoprecast S20

AIR ENTRAINING / RETARDANTS- Techmo Mort-Plast- Techmo Mort-Plast G-3- Techmo Retard Hormigón- Techmo Retard Hormigón H77R- Techmo Retard Mortero- Techmo Air Retard Mortero- Techmo Air Retard Mortero RM50- Techmo Air Retard Mortero RM65

ACCELERATORS- Techmo Acelerante- Techmo Acelerante MA103

LEVELING- Techmo Nivel G-92- Techmo Nivel S-93- Techmo Nivel M-1

OTHER ADDITIONS- Techmo Perlas de Poliestireno Expandido- Techmo Arcilla Expandida G12/20- Techmo Arcilla Expandida M4/10- Techmo Antigel- Techmo Fume SD92- Techmo Nanosilice

24

2424

25

26262626

* DYE FOR CEMENT

PIGMENT- Techmo Pigmentos 26

FIBRES

POLYPROPYLENE FIBERS- Techmofiber M-12- Techmofiber M-6- Techmofiber E-12- Techmofiber E-6- Techmofiber E-3- Techmofiber Plus 6mm.- Techmofiber Estructural 50 mm.

STEEL FIBERS- Techmofiber Acero 36/0,7- Techmofiber Acero 50/1,0- Techmofiber Acero Ondulada Redonda 50/1,0- Techmofiber Acero Ondulada Plana 50/2,5

CELLULOSE FIBERS- Techmofiber Cellulose 450- Techmofiber Cellulose 315

2727272 7272727

27272727

2727

AGGREGATES

WEARING COURSE- Techmorod Silice- Techmorod Corindón- Techmorod Cuarzo Corindón 25%- Techmorod Cuarzo Corindón 50%- Techmorod Microesferas de Vidiro- Techmorod Granza de Caucho

AGGREGATES- Techmo Marmolina- Techmo Dolomita

282828282828

2828

ADDITIVES

CONSERVATORS- Techmocure C- Techmocure E- Techmocure RA- Techmocure RP- Techmocure WR

PARTING- Techmofrol E-25- Techmofrol 50- Techmofrol 75

2929292929

292929

2929303030303030

30303030313131

313131313232323232

323232323233

33333333343434343434

3434343535353535

3535

353535

363636363636


9

FILMS

ANTI-IMPACT FILMS- Techmo Lam Impact- Techmo Lam Impact Plus- Techmo Lam Impact NOVO- Techmo Lam Impact Parquet- Techmo Lam Impact Foam + Aluminio 1 cara- Techmo Lam Impact Aluminio 2 caras- Techmo Lam Impact Silent Plus

INSULATING SHEETS- Techmo Lam Termic

BLADES DRAINAGE- Techmo Lam Dren Max- Techmo Lam Dren Geotextil- Techmo Boton Lam Dren Max

SEALING BANDS- Techmo Bituband 5000HD- Techmo Bituband 5000HD ALU- Techmo Butilband Geotex 300- Techmo Butilband Geotex 150

GEOTEXTILES

POLYPROPYLENE GEOTEXTILES- Techmo Geotex PP

POLYESTER GEOTEXTILES- Techmo Geotex PES

37373737373737

37

383838

38383838

38

38

MESH

MESH- Techmotex Malla Balizamiento- Techmotex Malla Ocultación 100%- Techmotex Malla Ocultación 70%- Techmotex 99 Revoco Mortero- Techmotex Fill 77 Malla Pintura- Techmotex 44 Malla Yeso- Techmotex Velofill 99

39393939393939

STRUCTURAL REINFORCEMENT SYSTEMS

CARBON FIBERS. BOOSTER BLADES- Techmo Carbolam L-50/1,2- Techmo Carbolam L-60/1,2- Techmo Carbolam L-100/1,2- Techmo Carbolam L-120/1,2- Techmo Carbolam L-50/1,4- Techmo Carbolam L-60/1,4- Techmo Carbolam L-100/1,4- Techmo Carbolam L-120/1,4- Techmodur Carbolam R-20- Techmodur Cabolam Imprimación

CARBON FIBERS. STRAPS- Techmo Carboband B-30/225- Techmo Carboband R-30- Techmo Carboband Imprimación

40404040404040404040

404040

COATINGS PROTECTION AND WATERPROOFING

BITUMINOUS EMULSIONS- Techmo Asfalt-AS- Techmo Asfalt-A2- Techmo Asfalt-Caucho- Techmo Asfalt F

41414141

WATERPROOFING PAINTS. MONOCOMPONENT- Techmo Imper 420- Techmo Imper 430R- Techmo Imper 500 Poliuretano- Techmo Imper 500 Alifático Poliuretano- Techmo Imper 501 POL Aqua- Techmo Imper 502- Techmo Imper 503 POL

WATERPROOFING PAINTS. BICOMPONENT- Techmo Imper 510- Techmo Imper 512 B- Techmo Imper 515- Techmo Imper 516 Poliurea- Techmo Imper 517 Poliurea Híbrida

HYDROPHOBIC IMPREGNATIONS- Techmo Hidrosil AQUA- Techmo Hidrosil 304 F- Techmo Hidrosil 304- Techmo Hidrosil Oilstop- Techmo Hidrosil Gres- Techmo Mineralizador- Techmo Anti Graffitti- Techmo Limp Graffitti

41414141414142

4242424242

4343434343434343

PAVEMENT SYSTEM. ASPHALT AND ACRYLIC

ASPHALT PAVEMENTS- Techmo Asfalto en Frio- Techmo Slurry Asfáltico

ACRYLIC FLOORING- Techmo Slurry Acrílico

4444

44

PAVEMENT SYSTEM. EPOXYEPOXY FLOORING

- Techmoepox Autonivelante- Techmoepox Suelos- Techmoepox W- Techmoepox Autonivelante W- Techmoepox Multicapa- Techmoepox Multicapa W- Techmoepox Multicapa AL

PRIMERS- Techmoepox Imprimación- Techmoepox W Imprimación- Techmoepox Imprimación Humedad- Techmoepox Imprinación Cerámica- Techmoepox W 1670

44444444454545

4545454545

POLYURETHANE FLOORING SYSTEMS

POLYURETHANE PAVIEMNTOS- Techmopol Protec 40 2C- Techmopol Protec 60- Techmopol Protec W Brillante- Techmopol Protec W Mate- Techmopol Protec Piscinas- Techmopol Suelos- Techmopol Autonivelante- Techmopol Antonivelante Flex

BINDERS AND ADHESIVES- Techmopol Ligante de Áridos- Techmopol Ligante de Áridos ESP- Techmopol Ligante Caucho- Techmopol Adhepur 100

4646464646464646

46464747


10

PRIMERS- Techmopol Imprimación Poliuretano- Techmopol Imprimación Epox Humedad- Techmopol Imprimación Epox 100- Techmopol Imprimación Tapa Poros

ADDITIVES- Techmopol Aditivo Acelerante- Techmopol Aditivo Acelerante Super- Techmopol Aditivo Anti-Slip- Techmopol Aditivo Mateante- Techmopol Aditivo Tixotropante- Techmopol Aditivo Espesante- Techmopol Cera Brillante- Techmopol Cera Mate- Techmopol Pasta Color W- Techmopol Pasta Color Disolvente

ARMOR FOR VERTICAL SEPARATION- UNI Rueda

BASED CONCRETE STRIPPERS- BK KNOCHEN con alambre- BK KNOCHEN sin alambre- ABS sin alambre- ABS con alambre

SPACERS FOR FORMWORK AND ACCESSORIES- SK CONO- ST TAPÓN- SK ROSETA- RST TAPÓN ESTANCO- RSR TUBO

PROFILE FOR MAKING CHAMFERS- Berenjeno o Perfil Triangular

STRIPPERS FOR LARGE PRECAST- STAPELPLATT

SAFETY AND SECURITY- Tapón de Seguridad- Soporte Quitamiedos

47474747

47474747484848484848

PAINTINGS

PLASTIC PAINTS- Techmocolor Pintura Interior Lavable- Techmocolor Pintura Interior Especial- Techmocolor Pintura Especial Fachadas- Techmocolor Pintura Fachadas Extra

PAINTINGS STONE- Techmocolor Revestimiento Petreo Liso- Techmocolor Revestimiento Petreo Rugoso

SPORTS PAINTINGS- Techmocolor Sport Tennis- Techmocolor Slurry T

PAINTINGS FOR POOLS- Techmocolor Sport Piscinas- Techmocolor Sport Piscinas Poliéster

SILICATE PAINTS- Techmopint Silicato- Techmopint Imprimación Silicato

ADDITIONAL PAINTINGS- Techmocolor Trafic Señalización Vial- Techmocolor Sellador Acrílico- Techmocolor Sellador Acrílico Especial- Techmocolor Aditivo Antimoho

49494949

4949

4949

5050

5050

50505050

SOLVENTS AND STRIPPERS

SOLVENTS- Techmopol Disolvente SA 100- Techmopol Disolvente SA 100 Retard- Techmopol Disolvente Universal

STRIPPERS- Techmo Decapante

515151

51

SPECIAL FLOORS

SLAB FILTER- Techmo Losa Filtrante 51

SEPARATORS AND SPACERS

ARMOR FOR HORIZONTAL SEPARATION- ASK TORRE- AL/2 Barra- Zick-Zack- Separador Vigueta

52525252

52

52525353

5353535353

54

54

5454

HYGIENE AND CLEANING

HYGIENE- Techmo Papel Secamanos Industrial- Techmo Soporte Bobina de Pie (Trípode)- Techmo Soporte Bobina de Pared (Mural)- Techmo Jabón Crema Desengrasante para Manos

CLEANING- Techmo Limp A- Techmo Limp S- Techmo Limpiagres- Techmo Limp Epox- Techmo Limpoleo- Techmo Limp Desengrasante- Techmo Limp Multinox Quitagrasas- Techmo Limp Clean- Techmo Sepiolita

55555555

555555555555555555

Techmo, Total Solutions

APPLICATION SOLUTION TECHMORepair concrete pillars.

Screeds on pillars.

Waterproofing of basements, swimming pools, drinking water tanks.

Waterproofing cracked pools, basements, water tanks and supports which can undergo movements.Concrete walls slightly absorbent coating mortar for later.

Insufficient or degraded dusty surface for subsequent coating with mortar.

Repair tunnels.

Plugging waterways.

Chipping on the concrete surface, surface smoothing concrete surfaces.

Spalling in concrete walls or repair damaged concrete aesthetic.

Sealing of expansion joints.

Self compacting concrete seen color white, floors, pillars, elements difficult step for a conventional concrete or which require a high aesthetic level.

Solera Autonivelante passable and reversible in 48 h.

Paste rockwool and fiberglass.

High strength plaster.

Fast anchors.

Techmonotop 693 or Techmonotop 693 Construcción

Techmo Grout 51 or Techmo Grout 51 Construcción

Techmoseal 531Techmoseal 531 IMPTechmoseal 550 IMP 2 CTechmoseal 553 IMPTechmodur Unión 32 N, Techmodur Unión 32 F or Techmodur Resin A-500

Techmodur Unión 32 F

Techmonotop 693 or Techmonotop 639 Construcción

Techmoseal 573 Mortero Rápido

Techmo Level 180 (Tráfico Peatonal) Techmo Level 355 (Tráfico Industrial) Techmo Level 300 IFS

Techmonotop Cosmetic

Techmoflex 11 PS

Techmocret HAC-45

Techmo Level 250, Techmo Level 280

Techmocol MC - Termoacústicos, Techmonotop Cosmetic

Techmonocapa M-25

Techmofix-3000

TABLE OF TECHMO SOLUTIONS

11

TABLE OF TECHMO FAMILY

NAME FAMILY

Techmo AceleranteTechmo AirTechmo AsfaltTechmo CarboTechmocemTechmocolTechmocolorTechmocretTechmocrom

TechmocureTechmodur

Techmoepox

Techmo ExpandTechmofiberTechmofixTechmoflexTechmofrolTechmofugeTechmo GeotexTechmo Grout

Accelerating admixturesAir-entraining agentsPaints and asphalt emulsionsStructural reinforcement systemSuperplasticizers additivesMortars queuePlastic paints, acrylicMicrohormigonesPrinted mortar system. Desmoldantes,resins and moldsConcrete CuratorsResins Union Bridges and Anchors,epoxy mortarsPaintings and decorative epoxy flooring system

Polyurethane FoamsMetal fibers, polypropylene or celluloseAnchors ResinsPolyurethane SealantsPartingAdditives for concrete waterproofingPolypropylene or polyester geotextilesStructural filler fluid mortarsand anchors

Techmo HidrosilTechmo ImperTechmojuntTechmo Lam

Techmo LevelTechmomentTechmo NivelTechmonocapaTechmonotopTechmoperfilTechmo PigmentoTechmopol

TechmoprecastTechmo RetardTechmorodTechmosealTechmo SeparadoresTechmosilTechmo SlurryTechmotex

Hydrophobic impregnationsPaints waterproofingGrout groutingSheets for waterproofing and drainageimpact sound insulationLeveling mortarsPolyfunctional additivesLeveling mortar additiveMortars monolayerConcrete repair mortarsProfiles HidroexpansivosColoring for mortar and concretePaintings and decorative flooring system polyurethane

Additives prefabricatedRetardant additivesAggregates for surface courses in pavementsMortars waterproofingArmor SeparatorsSiliconesFloorcoverings acrylic and epoxy asphaltGrids plaster, paint, masking meshes

NAME FAMILY

WhiteTranslucentOther colors, consult

COLOR CAPACITY PACKAGING CONTAINER

300 ml.300 ml.300 ml.

25 uds.25 uds.25 uds.

CartridgeCartridgeCartridge

Techmosil Neutra Silicones

Putty-component, neutral silicone elastomer notch on unprimed aluminum and concrete seals in façade panels in toilets and kitchens.

Silicones

WhiteTranslucent


300 ml.300 ml.

25 uds.25 uds.

CartridgeCartridge

Techmosil Acética Silicones Putty-component, silicone elastomer acetic acid crosslinking high quality seals in façade panels, in health and in kitchens.

Polyurethane MasticsPolyurethane Foam

SiliconesSealing Systems

Complementary Products

Polyurethane MasticsTechmoflex 11 PS Polyurethane Mastics

WhiteWhiteGrayGrayBlackBlackBrownBrown


310 ml.600 ml.310 ml.600 ml.310 ml.600 ml.310 ml.600 ml

25 uds.12 uds.25 uds.12 uds.25 uds.12uds.25 uds.12 uds.

CartridgeSausageCartridgeSausageCartridgeSausageCartridgeSausage

TECHMOFLEX 11 PS is a putty-component polyurethane based glue and seal. Ranked elastomer notch. It is used for sealing expansion joints and static, such as concrete panels on the facade, aluminum, iron, wood, etc.

Techmoflex Industria Polímero MS

BlackGrayWhite


290 ml. 25 uds. Cartridge

Monocomponent filler and silicone-free adhesive polymer based isocyanates hybrids suitable for bonding and sealing elements and automobile industry.

Techmoflex Hidroexpansivo Polímero MS

Cinzento


310 ml. 25 uds. Cartridge

Hydroswelling-component sealing mastic or adhesive hidroexpansivos profiles.

Techmo Expand P750 Polyurethane Foam

Spray

USE PACKAGING CONTAINER

12 uds. Boat 750 ml.

Polyurethane expanding foam, especially suitable for stuffing and mounting isolation. Presents adhesion to all building materials, surfaces except polyethylene, Teflon, oils and greases, mold release agents and the like. Spray application.

Techmo Expand Tejas Polyurethane Foam

Manual


12 uds. Flask 750 ml.

Polyurethane expanding foam, especially suitable for stuffing and mounting isolation.

Techmo Expand N750 Polyurethane Foam

Manual


12 uds. Flask 750 ml.

Polyurethane expanding foam, especially suited for stuffing and mounting isolation. Presents adhesion to all building materials, surfaces except polyethylene, Teflon, oils and greases, mold release agents and the like. Manual application.

Polyurethane Foam

CAPACITY PACKAGING CONTAINER

500 ml. 25 uds. Flask 750 ml

Techmo Expand Limpiador Polyurethane FoamSpecial solvent for polyurethane foam and helpful (pistols, spatulas, utensils, etc). Cleaning must be performed before the foam hardens.

Sealing Products

12

Gauge 400Gauge 800Gauge 1200

TYPE COLOR WEIGHT SIZE

Black/Transp.Black/Transp.Black/Transp.

94 gr/m2188 gr/m2282 gr/m2

Roll 3x100 m.Roll 4x100 m.Roll 8x50 m.

Techmo Barrera de vapor Sealing Systems

Film low density polyurethane.

Sealing SystemsTechmocinta PVC E Sealing Systems

E DI-15E DI-19E DI-22E DI-24E DI-32E DI-40E DI-50

TYPE

PVC tapes for sealing expansion joints and work.

Expansion joint inside

Inside Job Board

E TI-19E TI-24

Expansion joint foreign

E DE-19E DE-24

SECTION WIDTH

15 cm.19 cm.22 cm.24 cm.30 cm.40 cm.50 cm.

19 cm.24 cm.

19 cm.24 cm.

COLOR

BlueBlueBlueBlueBlackBlueBlue

BlueBlue

BlackBlack

PRESENTATION

Roll 25 m.Roll 25 m.Roll 25 m.Roll 25 m.Roll 25 m.Roll 25 m.Roll 25 m.

Roll 25 m.Roll 25 m.

Roll 25 m.Roll 25 m.

Complementary ProductsFondos de Juntas Complementary Products

6 mm.10 mm.15 mm.20 mm.25 mm.30 mm.40 mm.50 mm.

DIAMETER METERS PRESENTATION CONTAINER

2500 m.1150 m.550 m.350 m.200 m.160 m.270 m.180 m.

RollRollRollRollRollStripStripStrip

BoxBoxBoxBoxBoxBoxBoxBox

Profiles polyethylene foam backer rod. They are used in the traditional bañilería, screen walls, prefabricated heavy or light, floor boards. With putties Techmo.

Techmo Cordón Asfáltico Sealing Systems

1,5 gr./ cm3

CONSUMPTION SIZE PRESENTATION

25 mm diameter50 cm length

Tiras de 0,5 m.

Mastic asphalt cold applied, high flexibility and adherence

WH 2005

WH 2010

DENOMINATION COLOR THICKNESS SIZE

Red/Black

Green

5 mm.

10 mm.

Techmoperfil Hidroexpansivo SALINA WH Sealing Systems

Hidroexpansivos profiles for controlled expansion joint sealing. Special saltwater

Roll 10 m.

Roll 5 m.

COLOR PRESENTATION

Black Box of 25 kg

Techmo Asfalt Sellador Sealing Systems

Mastic Bitumen, hot-applied modified.

Techmo Sellastop Espadín Sealing Systems

Techno Sellastop Spadin: 1.5 - 2 bars

Techno Sellastop Sprat for water tanks: 5 bars.

BlackGray

COLOR CONSUMPTION PRESENTATION

Unit by hole 30 + / - 5gr.

Ensures complete waterproofing of holes and grommets tubes resulting from the removal of formwork, the minimum life time is estimated at more than 30 years at a temperature of 15 ° C, keeping all their properties unchanged.

Plastic buckets of 500 units

WEIGHT

P 2005 W

P 2010 WP 2020 W

DENOMINATION COLOR THICKNESS SIZE

Red/Black

Red/BlackRed/Black

5 mm.5 mm.

10 mm.20 mm.

Roll 10 m.Rolo 15m.

Techmoperfil Hidroexpansivo P Sealing Systems

Hidroexpansivos controlled expansion profiles for sealing gaskets

Roll 15 m.Roll 5 m.

COLOR PRESENTATION

Consult 1l bottles

Techmo Primer 1 Complementary Products

Polyurethane Primer

Sealing Products

13

Polyurethane MasticsPolyurethane Foam

SiliconesSealing Systems

Complementary Products

Techmodur Masilla Polivalente Stuffed and AnchorsPutty application special on and off the water.


Blue/Yellow 1,6 kg/m2(a thickness of 1mm.)

Lot A+B0,5 kg., 1 kg., 2 kg., 10 kg. y 50 kg.

Techmodur Anclajes Stuffed and Anchors

Mortar three components for anchors and bearing plates filled, smooth consistency, composed of solvent-free epoxy resins and selected aggregates.


Grey Approx. 1,9 kg/m2 per mm. thick

Lot A+B+C 1,5 kg.Lot A+B+C 13 kg.

Stuffed and Anchors

Stuffed and AnchorsBridges of Union

InjectionResins

Dark Amber

COLOR PERFORMANCE PRESENTATION

Approx. 1.4kg/m2 per mm. of thickness

Lot A+B 1,2 kg.Lot A+B 10 kg.Lot A+B 25 kg.

Techmodur Unión 31 Bridges of Union Adhesive kissed two component solvent free epoxy resins for bonding building materials, concrete, mortar, natural or artificial stone, iron, aluminum, wood, agglomerated, polyester, epoxy, glass, etc.

Amber


Aprox. 0,3 kg/m2por mm de espessura

Lot A+B 1 kg.Lot A+B 12 kg.

Techmodur Unión 32F Bridges of Union

Two-component adhesive composed of fluid consistency epoxies, solventless, that applied to old concrete surfaces provides a perfect match with fresh concrete.

Amber


Approx. 1.4kg/m2per mm. Of thickness

Lot A+B 1,20 kg.Lot A+B 5 kg.Lot A+B 43 kg.

Techmodur Unión 32N Bridges of Union

Product bicomponent epoxy resin formulated without solvent. Its thixotropic consistency makes application easy and can be used on vertical surfaces, ceilings or horizontal, as well as all kinds of adhesive materials like mortar construction or regularization.

Bridges of Union

Yellow


0.3kg/m2 (undiluted)

Containers 6 kg.Containers 25 kg.

Techmodur Lechada de Adherencia Bridges of UnionBridge adherence to synthetic resins, mineral fillers and organic and inorganic additives to enhance anchoring cement based mortars and / or lime on concrete surface smooth or without absorption.

Techmofix 1000 Stuffed and Anchors

Grey

COLOR CAPACITY PACKAGING

300 cc.410 cc.

12 Cartridge12 Cartridge

Styrene free polyester resin for fast curing chemical anchors.


Grey


380 cc. 12 Cartridge12 Cartridge

Epoxy Acrylate Resin bicomponent for chemical anchors. without styrene


Grey


300 cc.380 cc.410 cc.

12 Cartridge12 Cartridge12 Cartridge

Epoxy Acrylate Resin for anclejes fast curing chemicals.


Grey


400 cc. 12 Cartridge

Pure epoxy resin for chemical anchors.

Techmodur Masilla Polivalente Hydro Stuffed and AnchorsPutty special two-part underwater work.


Blue/White 1,6 kg/m2(a thickness of 1mm.)

Lot A+B 0,5 kg., 1 kg., 2 kg., 10 kg.

y 50 kg.

14

15

Yellow


Depends on treat cracks

Lot A+B 5 kg.

Techmodur Inyección InjectionHigh flow epoxy resin, solvent for reinforcement of concrete structures by injection into its cracks and crevices.

Injection

Consult



Lot A+B 25 kgLot A+B 200 kg

Techmodur Inyección Aquareactiva InjectionA novel two-component polyurethane system which reacts with water quickly, forming a foam of high mechanical properties and performance.

Consult



Resin 25 kg +2.5 kg accelerator

Techmodur Inyección Aquareactiva Flex InjectionA novel two-component polyurethane system which reacts with water quickly, forming a foam of high mechanical properties and performance.

Resins

Armour Protection

Armour ProtectionTechmoepox 615 Pasivante 2C Armour Protection

Two component exposy resin (red)

APPEARANCE

Bridging epoxy primer for protection and armor. (there is a version for spray application, consult our Technical Dept.).

PRESENT.CONSUMPTION

Approx. 0.75 to 1.25 kg/m2

Plastic containersof 1 kg. and 5 kg.

Techmonotop 610 Pasivante Armour Protection

Light Gray powder

APPEARANCE

Primer active armor protection and bridge for concrete mortar. Cementitious Base.

PRESENT.CONSUMPTION

Approx. 1.5 kg/m2 per mm. of thickness

Sets of1 and 5 kg.

Techmodur Resin A-500 Bridges of Union

Adhesion primer, acrylic resin based water based upon the application of all types of cement mortars, plasters, cements derivatives, casts. On absorption supports medium-high.


White Aprox. 0,125-0,150 kg/m2

Bottle of 1 kg.Bottle of 5 kg.Bottle of 25 kg.

Techmodur Latex Bridges of UnionSynthetic emulsion mixed with water used for making mortar or grout, achieving good adhesion and water resistance.


White Approx. 1 vol.Latex Techmo 2 Vol

of water by

Bottle of 5 kg.Bottle of 25 kg.

Techmodur Latex S360 Bridges of UnionSynthetic emulsion mixed with water used for making mortar or grout, achieving good adhesion and water resistance.


White Grout: appox. 0.130 kg/m2Mortar: 0.650 kg/m2

Bottle of 5 kg.Bottle of 25 kg.

Armour Protection

Stuffed and AnchorsBridges of Union

Injection

Mortar

Techmonotop Cosmetic Repair

Grey

COLOR CONSUMPTION APROX. PRESENTATION

Máx. 5 mm. Bags of 25 kg.

Special cement mortar cosmetic repair and leveling in thin layers.

1.8 kg/m2 per mm. Of

thickness

Techmonotop Cosmetic R2 Repair

GreyWhite


0 - 5 mm. Bags of 25 kg.

Mortar fine for all surface repairs.

1.7 kg/m2 approx. Application to a

thickness of 1 mm.

Techmonotop 693 Construcción Repair

GreyWhite


10 - 40 mm. Bags of 25 kg.

Repair mortar based on hydraulic binders (PCC) shrinkage compensated thixotropic.

22 kg/m2

Techmonotop 693 Repair

Grey


Min. 5 mm.Máx. 50 mm.

Bags of 25 kg.

Repair mortar based on hydraulic binders and resins.

1.8 kg. Dry mortar per m2 and mm. thick

Repair

Máx. 50 mm

Techmodur 40 Mortero Reparación Repair

Grey


Lot A+B+C de 5 kg. - 12 kg.

20 kg.

Mortar for repair of three components, thixotropic consistency and epoxy resins consisting of solvent-free and selected aggregates.

1,8 kg/m2 por mm. de

espessura

50 mm. Max

Aprox. 10 mm. Aprox. 22


Grey


Lotes de A+B de 29 kg.

Thixotropic mortar polymerized (PCC) improved with synthetic resins.

10 - 40 mm. 22 kg/m2

1 - 4 cm. 19 kg /m2

Techmonotop 695 Fast Repair

GreyBlack


Bags of 25 kg.

Mortar-component structural repair of concrete, fast paste, passable at 2 hours.

19 kg/m25 - 50 mm.


1,80 kg mortero seco/m2 por

mm. de

Techmonotop 699 Repair

Grey


Bags of 25 kg.

Repair mortar based on hydraulic binders and resins.

15 - 50 mm 2,1 kg/m2Aprox.

1 - 4 cm. 22 kg/m2


Grey


Bags of 25 kg.

Hydraulic Mortar polymerized (PCC) shrinkage compensated thixotropic.

LAYER THICKNESS


2,1 kg/m2Aprox.

1 - 4 cm. 19 kg /m2

Techmonotop 696 SFG Repair

Grey


Bags of 25 kg.

Mortar-component structural repair of concrete with embedded corrosion inhibition.

19 kg/m25 - 50 mm.

Techmonotop 692 Fluid Repair

Grey


Consult Bags of 25 kg.

Fluid mortar for concrete repair.

Consult

Techmonotop 700 Fix Repair

Grey


3 - 50 mm. Bags of 25 kg.

Mortar fine for all surface repairs.

Approx. 1.8 kg.Dry mortar per m2 and mm. of thick

16

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LevelingStuffed, Anchors, Expandable, Grout

WaterproofingRepair

Tile AdhesivesMicroconcrete

Mortar GroutingDry Mortar

Refractory MortarTheming Mortar

Monocapa

Mortar

Techmoseal Adición Waterproofing

White


Bottleof 8.5 l

Polymer dispersion to be added to 531 and conferring Techmoseal flexible properties.

1 bottle per bag of Techmoseal

531

Consult

Techmoseal 553 IMP Waterproofing

Grey


20 kg.

Mortar waterproof flexible, single component cement based formulation, special resins, additives and selected aggregates.

Thickness: 2 mm.Consumption: 3.2 kg/m2

(no water pressure)Thickness: 3 mm.

Consumption: 4.2 kg/m2 (with water pressure)

2 a 3 mm.

Techmoseal 573 Mortero Rápido Waterproofing

Grey


Bags of 20 Kg.

Mortar Ultrafast setting (30-45 sec.) For plugging waterways.

2 gr. cm3 volume by

filling

Consult

Techmoseal 573 Mortero Rápido R2 Waterproofing

Grey


Bags of 25 Kg.

Fast setting mortar for plugging waterways. Setting time: 30 sec.

ConsultConsult

Techmoseal 550 Super Elastic 2C Waterproofing

WhiteGrey


Lot A+B de 30 kg.

Mortar waterproof, elastic, flexible, two component applicable in potable water tanks. Movements designed to withstand water containment structures.

3,0 - 7,5 kg/m2

de 2 a 5 mm.

Techmoseal 511 Red Capilar Waterproofing

Grey


Bags of25 kg.

Waterproofing of the capillary network of concrete and mortar.

2 kg/ m2/mmMin. 1 mm.

WaterproofingTechmoseal 531 Waterproofing

GreyWhite


Bags of25 kg.

Waterproofing mortar, cement-based, resin and silica fume. Suitable for contact with potable water.

3,08 - 4,5 kg/m2de 2 a 5 mm.


GreyWhite


Lot A+B de 30 kg.

Mortar waterproof, flexible based bicomponent special cements, additives and selected aggregates that provide an extraordinary imperbeabilidad. SUITABLE FOR POTABLE WATER

2 a 5 mm.


WhiteGrey


25 kg.

Single component waterproof mortar based on special cements, special resins, additives and selected aggregates that provide outstanding water resistance, excellent adhesion and sealing a great power of voids and pores.

4 kg/m22 mm.

Stuffed, Anchors,Expandable, GroutTechmo Grout 21 Stuffed, Anchors, Expandable, Grout

Grey


5 - 50 mm Bags of 25 kg.

Styrene free polyester resin frame for fast chemical anchors.

4 - 10 kg/,2

2 kg/m2/mm

17

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS


WaterproofingRepair




Monocapa

Mortar

Techmo Level 355 Leveling

Grey


Bags of25 kg.

Formulated mixing cement, selected aggregates, polymeric resins, fibers and additives that give it a proper fluidity, excellent adhesion and minimal shrinkage, and a rapid development of resistance and fast drying.

5- 40 mm. 1,6 kg/m2/mm

Techmo Level 300 IFS Leveling

Grey


25 kg.

High strength mortar, self-leveling mix formulated with selected aggregates and cement, polymer resins and additives that give fast cure and high fluidity.

3- 30 mm. 1.6 kg/m2 for an application

thickness of 1 mm.


Grey


40 - 80 mm. Bags of 25 kg.

Pasta leveling CT-C20-F7 according to UNE-EN 13813.

2 kg/m2/mm.


Grey


25 kg.

Single component cementitious mortar for leveling adjustment and interior floors that will be covered later with finished ceramic, stone, carpet, flooring, etc.

5 - 20 mm 1,65 kg/m2/mm

Leveling


Grey


25 kg.

Single component cementitious mortar, leveling of great fluidity, which can be applied manually or pumped, getting a surface leveling prior to application of the finish.

5 - 25 mm 1,77 kg/m2/mm

Techmo Grout 51 Stuffed, Anchors, Expandable, Grout

Grey



Non-shrink mortar for filling fluid and precision attachments.

2,2 kg/m2/mm

Techmo Grout 21 Construcción Stuffed, Anchors, Expandable, Grout

Grey


5 - 50 mm 2,2 kg/m2/mm Bags of 25 kg.

Non-shrink mortar to hydraulic fluid filled pressure and anchors.

Techmo Grout 51 Construcción Stuffed, Anchors, Expandable, Grout

Grey



Non-shrink mortar to hydraulic fluid filled pressure and anchors.

2,2 kg/m2/mm

Techmo Grout 55 Fast Stuffed, Anchors, Expandable, Grout

Grey


Bags of 25 kg.

Non-shrink thixotropic cementitious mortar high strength repairs, anchors and panels together.

2,2 kg/m2/mm15 - 50 mm

Techmo Grout 55 Fast Black Stuffed, Anchors, Expandable, Grout

Black


Bags of 25 kg.

Non-shrink cementitious mortar high early and final strengths for repairs, anchorages, joints board. Fast setting.

22 kg/m235 mm.

Techmo Grout Filler Stuffed, Anchors, Expandable, Grout

Grey


Bags of 25 kg.

Mineral fillers selected for making mortars grouts for filling large volume exceeding 50 mm

50 mm. 25 kg. Grout Techmo Filler per 50 kg. From Techmo Grout 51/21

18

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS

LAYER THICKNESS


WaterproofingRepair




Monocapa

ALIC

ATAD

OS

Examples:

- Coating unbound, anchored to the support: technical Flooring, floor placed on rails, etc..- Coating unattached, unanchored to support: Laminate flooring, carpet placed above the mortar without adhesion, etc.- Coating adhered, normal type: Placement of stoneware, marble, etc., With adhesives.- Coating adhered, special type: Laying carpet, linoleum, etc.., With adhesives.

E: ThicknessC: ResistanceA: Wear Resistance BöhmeRF: Fire resistance

Legend - self-leveling mortars Table

*TABLE OF RECOMMENDATIONS FOR USE SELF-LEVELING MORTARSCOATING / SUPPORT POLYETHYLENE CONCRETE HEATING SYSTEM

E 40 mm. C 20: Techmo Level 280

Unbound coating.Anchored to support

E: 5-40 mm.C 20: Techmo Level 250

Unbound coating.Not anchored to the support

High planimetry: E 40 mm.C 20: Techmo Level 280

High planimetry E: 5-40 mm.C 20: Techmo Level 250

High flatness. Without polypropylene fiber.No air-entraining E 50 mm.C 20: Techmo Level 280

Coating adhered.Normal rate

High flatness.E 40 mm.C 20: Techmo Level 280

Surface TreatmentE: 5-40 mm.C 20: Techmo Level 250

High flatness. Without polypropylene fiber.No air-entrainingE 50 mm.C 20: Techmo Level 280

Coating adhered.Special Type

High flatness.Surface treatment:E 40 mm.C 20: Techmo Level 280

High planimetrySurface TreatmentE: 5-40 mm.C 20: Techmo Level 250

High flatness.Without polypropylene fiber.No air-entrainingE 50 mm.C 20: Techmo Level 280

Coating seenRF Surface treatment declared E 40 mm.C 25, A 22: Techmo Level 280

RF Surface treatment declaredE: 5-40 mm.C 20: Techmo Level 250

RF Surface treatment declared. Without polypropylene fiber.Without air inclusionsE 50 mm.C 20, A 22: Techmo Level 280

Mortar

Tile Adhesives

Techmocol MC 100 Tile Adhesives

White

COLORCONSUMPTION

APROX. PRESENTATION

100% passes through the sieve 1mm.

Bags of 25 kg.

Tile adhesive type C-1 T for laying ceramic tiles and floorings medium and high absorption.

GRANULOMETRY

3,5 kg/m2

Techmocol MC Tile Adhesives

GreyWhite

COLORCONSUMPTION

APROX. PRESENTATION

0/1,5 Bags of 25 kg.

Tile adhesive for laying ceramic tiles and floorings medium-high absorption.

3,5 kg/m2

GRANULOMETRY


GreyWhite

COLORCONSUMPTION

APROX. PRESENTATION

Bags of 25 kg.

Tile adhesive type C-TE.

3,5 kg/m2

GRANULOMETRY



WhiteGrey

COLORCONSUMPTION

APROX. PRESENTATION

Bags of 25 kg.

Adhesive cementation for ceramic tiles. Type C2-TE.

3,5 kg/m2

GRANULOMETRY


19


WaterproofingRepair




Monocapa

Mortar

Techmocol MC Termoacústico Tile Adhesives

Grey

COLORCONSUMPTION

APROX. PRESENTATION

Bags of 25 kg.

Morteiro adesivo para colocar painéis de isolamento de lã mineral em cerramentos.

7 kg/m2

GRANULOMETRY

0/0,5

Techmocol MC Exterior Capa Gruesa Tile Adhesives

White

COLORCONSUMPTION

APROX. PRESENTATION

0/2 Bags of 25 kg.

Tile adhesive for indoor and outdoor installation Tile stoneware medium-low absorption. Type C1 T.

GRANULOMETRY

10 - 15 kg/m2

Techmocol MC Escayola Tile Adhesives

White

COLORCONSUMPTION

APROX. PRESENTATION

Consult Bags of 18 kg.

Special adhesive for bonding decorative pieces of plaster moldings, etc.

3,5 - 4 kg/m2

GRANULOMETRY

Techmocol MC Yeso Tile Adhesives

White

COLORCONSUMPTION

APROX. PRESENTATION

0/1 Bags of 25 kg.

Tile adhesive for laying tiles medium-high absorption indoors on gypsum plaster and plaster.

GRANULOMETRY

3,5 - 4 kg/m2


White

COLORCONSUMPTION

APROX. PRESENTATION

Bags of 25 kg.

Special cementitious adhesive for bonding marble slabs and natural stone.

3 - 5 kg/m2

GRANULOMETRY

Consult

Techmocol Flex MC 401 Tile Adhesives

White

COLORCONSUMPTION

APROX. PRESENTATION

Bags of 25 kg.

Adhesive cementation for ceramic tiles Type C2 TE S1.

3,5 - 4 kg/m2

GRANULOMETRY

100% Passapelo

Tamis 1mm

Techmocol Flex MC 501 Blanco Tile Adhesives

White

COLORCONSUMPTION

APROX. PRESENTATION

Bags of 25 kg.

Adhesive cementation for ceramic tiles type C2 S1 according to UNE-EN 12004.

3,5 - 4 kg/m2

GRANULOMETRY

0/1

Techmocol Flex MC 601 Tile Adhesives

Grey

COLORCONSUMPTION

APROX. PRESENTATION

Bags of 25 kg.

Adhesive cementation for ceramic tiles type C2 FTE S1

3,5 - 4 kg/m2

GRANULOMETRY

ALIC

ATAD

OS

Legend - Table Mortars Cola

1. On irregular substrates (3 to 8 mm measured 2m rules.) Or direct placement on ceramics, utilizr special adhesive.2. It is highly advised in formats larger than 90 cm23. It may be necessary to support pretreatment.4. Adhesives are recommended for vertical applications reduced slip.5. To put into service or facilitate rapid drying in large formats, using fast-setting adhesives.6. Adhesives S1 or S2 according to the form and movements of the support parts (the piece weight of 2240 kg/m2 advisable s2)7. Use adhesives compatible with the plaster.8. Use deformable adhesives.

Formats upper 900 cm., Double-spread use. In case of application on highly absorbent substrates or high temperatures and wind, use adhesive open time.

Nomenclatura de uso com a norma UNE-EN—12004:C: cementitious adhesive.D: dispersion adhesive1: Normal Adhesive2: Enhanced AdhesiveT: reduced slipE: extended open time to 30 min.F: fast-setting adhesive

Nomenclature used in the UNE-EN-12002:S1: Adhesive deformable transverse deformation 2.5mm. and <5mm.S2: a deformable adhesive racking 5mm.

20

100% passes through the sieve 1 mm.


WaterproofingRepair




Monocapa

MortarAL

ICAT

ADOS

TABLE OF RECOMMENDATIONS FOR MORTER USE

SUPORTE / ABSORÇÃO MUITO BAIXA E 0,5 BAIXA 0,5 E 3 MÉDIO 3 E 10 ALTO E 10

INTE

RIOR

Ladrilho/Bloco Techmocol MC-EXT C11

Techmocol MC-EXT C11

Techmocol MC-EXT C11

Morteiro TechmocolMC-200 C1T

TechmocolMC-100 C1T

TechmocolMC Grey/TechmocolMC-22 Grey/White

TechmocolMC Grey/TechmocolMC-22 gris/blanco

Cerâmica de grande formato7

Techmocol MC-301 C2TE7

Techmocol MC-200 C1T7

Techmocol MC-YESO7

Techmocol MC-YESO7

Gesso7 Techmocol MC-301 C2TE

Techmocol MC-301 C2TE

Techmocol MC-YESO

Techmocol MC-YESO

Cartão deGesso Hidrófugo8

Techmocol Flex MC-501 C2TE S1



Techmocol Flex MC-301 C2TE

Cerâmica

Morteiro TechmocolMC-100 C1T

TechmocolMC Grey/TechmocolMC-22 Grey/White

TechmocolMC-100 C1T

Betão Techmocol MC-301 C2TETechmocolMC-402 C2FE

TechmocolMC-200 C1T

TechmocolMC-100 C1T

Cerâmica / Terraço Mármore3

Techmocol Flex MC-501 C2TE S1TechmocolMC-402 C2FE5

Techmocol MC-301 C2TETechmocolMC-402 C2FE5

Techmocol MC-301 C2TETechmocolMC-402 C2FE5

Betão Techmocol MC-301 C2TETechmocol FlexMC-402 C2FE

TechmocolMC-301 C2TETecmocol MC-402 C2FE

TechmocolMC-301 C1TE

Cerâmica / Terraço3 Techmocol Flex MC-501 C2TE S1Techmocol FlexMC-402 C2FE5

Techmocol Flex MC-501 C2TE S1Techmocol FlexMC-402 C2FE5

Techmocol Flex MC-501 C2TE S1Techmocol FlexMC-402 C2FE5

Morteiro Techmocol MC-301 C2TETechmocolMC-402 C2FE

Techmocol MC-100 C1T

TechmocolMC-200 C1T

Betão Techmocol Flex MC-402 C2FETechmocol FlexMC-501 C2TE S16

Techmocol Flex MC-402 C2FETechmocol FlexMC-501 C2TE S1


Morteiro TechmocolMC-301 C2TETechmocolMC-402 C2FE

TechmocolMC-301 C2TE


SOLA

DOS

ALIC

ATAD

OSSO

LADO

S

EXTE

RIOR

21


WaterproofingRepair




Monocapa

Mortar

Techmorsec M-7,5 Fino Dry Mortar

GreyWhite

COLORCONSUMPTION

APROX. PRESENTATION

Bags of30 kg

Dry mortar made with cement and / or lime, selected aggregates and additives that give it great workability, water retention and adherence.

8 kg/m2, for an application

thickness of 5 mm

7,5 N/mm2

Techmorsec M-30 SR Dry Mortar

Grey

COLORCONSUMPTION

APROX. PRESENTATION

Bulk: in silos of 24Tm

Mortar formulated portland cement-based SR type, selected aggregates and additives fluidifying controlled glanulometry that give a great workability, strength and power flow.

30 N/mm2 17 kg/m2, for an application

thicknessof 1 cm

Techmorsec M-7,5 Dry Mortar

WhiteGrey

COLORCONSUMPTION

APROX. PRESENTATION

Bags of30 kg

Dry mortar made with cement and / or lime, selected aggregates and additives that give it great workability, water retention and adherence.

RESISTENCE

RESISTENCE

17 kg/m2, for an application

thicknessof 1 cm

7,5 N/mm2

Dry Mortar

Techmorsec M-10 Dry Mortar

Grey

COLORCONSUMPTION

APROX. PRESENTATION

Bags of30 kg

Dry mortar made with cement, selected aggregates and additives that give it great workability, water retention and adherence, as well as minimal shrinkage.

LAYER THICKNESS

ConsultConsult

Techmorsec M-25 Dry Mortar

Grey

COLORCONSUMPTION

APROX. PRESENTATION

Bulk: in silos of 24Tm

Mortar formulated, selected aggregates and additives fluidifying controlled glanulometry that give a great workability, strength and power flow.

Consult Consult

Mortar GroutingTechmojunt Mortar Grouting

Yellow, Blue, Blue Sky,Blue Sea, Beige, Black, Bronze, Cream, Chocolate, Grey, Light Grey, Bone, Ivory, Brown, Black, Ochre, Red, Pink, Snuff, Emerald Green, Green Grass, Purple


30 kg.

Filling joints from 1 mm. to 15 mm. wide between ceramic tiles on any type of flooring or coating both inside and outside.

0,5 - 1,5 kg/m2

MicroconcreteTechmocret HA-25 White Microconcrete

White


5 - 50 mm 2.0 kg. Fresh mix per m2

and mm thick

Bags of 25 kg.


LAYER THICKNESS

Techmocret HAC-45 Microconcrete

WhiteGrey




LAYER THICKNESS

2,2 kg/m2/mm

Techmocret HA-30 Microconcrete

WhiteGrey



Preparation of micro concrete with cement, selected aggregates and special additives.

LAYER THICKNESS

2.2 kg. Fresh mix per m2

and mm thick

22

RESISTENCE

RESISTENCE


WaterproofingRepair




Monocapa

Mortar

*Table of recommendations for use mortar rendering / plastering. Monolayer (OC).TYPE OF APPLICATION TYPE OF WORKS MORTAR

INTERIOR (PLASTER)

EXTERNAL (REVOCOS)

Painted plaster.Layers of regularizationPlasters of interior partitions.Plasters internal enclosures.

Painted plasters.Plaster with other coatings.Protectors.

Unpainted plaster.Exterior plasters exposure to water and high winds.

CS II-WOCS III-WOCS IV-WO

CS III-WOCS III-W1CS IV-WOCS IV-W1

CS III-W1(OC) CS III-W2(OC) CS IV-W1(OC) CS IV-W2

ALIC

ATAD

OS

Legend table Monolayer

Nomenclature used in the UNE-EN-998-1:

- Compressive strength at 28 days (N/mm2):CS II: 1,5 - 5,0CS III: 3,5- 7,5CS IV: 6,0

- Water absorption by capillarity (kg/m2. 1/2 Min)WO: Not specifiedW1: 0,40W2: 0,20

Techmonocapa Acabado Fino Monocapa

Consult

COLORCONSUMPTION

APROX. PRESENTATION

Bags of25 kg.

Rendering and plastering mortar commonly used GP CS IV W2 under UNE-EN 998-1

LAYER THICKNESS

1,6 kg/m2/mmAprox. 15 mm.

Monocapa

Techmonocapa Acabado Raspado Monocapa

Consult

COLORCONSUMPTION

APROX. PRESENTATION

Bags of25 kg.

Mortar for plastering monolayer (OC) CS III W2 under UNE-EN-998-1.

LAYER THICKNESS

1,5 kg/mm/m2Aprox. 15 mm.

Techmonocapa Acabado Piedra Monocapa

Consult

COLORCONSUMPTION

APROX. PRESENTATION

Bags of25 kg.

Mortar for plastering OC CS III W2 monolayer under UNE-EN-998-1.

LAYER THICKNESS

1,5 kg/m2/mmAprox. 15 mm.

Theming MortarTechmo Artek K1 Theming Mortar

Consult

COLORCONSUMPTION

APROX. PRESENTATION

Bags of25 kg.

Mortar formulated with portland cement, selected aggregates and additives that give it great thixotropic, water retention and adherence, as well as hydrophobic compounds and fibers.

STRENGHT/COMPRESSION

2 kg/m2/mm15 N/mm2

Refractory MortarTechmo Refrac Refractory Mortar

Grey

COLORCONSUMPTION

APROX. PRESENTATION

Bags of25 kg.

Mortar formulated with portland cement, selected aggregates and additives that give it great thixotropic, water retention and adherence, as well as fibers and hydrophobic compounds.

1,8 kg/m2/mmWithout warming:- After 1 hour:> 7.0 N/mm2.

- After 28 days :> 25.0 N/mm2.

800 ° C with heating:- After 1 h : > 4.0 N/mm2

- After 28 days : > 6.0 N/mm2

23

STRENGHT/COMPRESSION


WaterproofingRepair




Monocapa

Printed PavementTechmocrom Impreso Printed Pavement

L-6 clay

Cream

Cork

Curo L-4

L-2 Pizara Gray

Mustard l-8

Black L-1

L-5 Walnut

Gold

Silver L-3

Red Tile

Red L-11

Green L-10


Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Printed pavement durability, excellent resistance to weather and rapid commissioning work. Suitable for indoor and outdoor applications, including a wide range of designs.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

Techmocrom Impreso Basic Printed Pavement

L-6 clay

Cream

Cork

Curo L-4

L-2 Pizara Gray

Mustard l-8

Black L-1

L-5 Walnut

Gold

Silver L-3

Red Tile

Red L-11

Green L-10


Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Paved printed for durability, excellent resistance to weather and quick implementation time. Suitable for indoor and outdoor applications, and a wide range of designs.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

4 kg/m2.

Printed ScreedTechmocrom Screed Impreso Screed

Clay L-6

L-4 Leather

Slate Gray L-2

L-8 Mustard

Black L-1

L-5 Walnut

Gold

Silver Gray L-3

L-11 Tile Red

Green L-10

COLOR (orientativo) CONSUMPTION PRESENTATION

Sacos 25 kg.

Sacos 25 kg.

Sacos 25 kg.

Sacos 25 kg.

Sacos 25 kg.

Sacos 25 kg.

Sacos 25 kg.

Sacos 25 kg.

Sacos 25 kg.

Sacos 25 kg.

Pavement little printed layer to 1 cm. thick, on pavements or damaged surfaces, high durability, excellent resistance to weather and putting into play, indoor and outdoor.

22 kg/m2 per cm of thickness










Release AgentsTechmocrom Desmoldeante Release Agents

Yellow

White

Cork

Light Grey

Grey

Brown

Mustard

Black

Red

Green

COLOR CONSUMPTION

Bags of 10 kg.

Bags of 10 kg.

Bags of 10 kg.

Bags of 10 kg.

Bags of 10 kg.

Bags of 10 kg.

Bags of 10 kg.

Bags of 10 kg.

Bags of 10 kg.

Bags of 10 kg.

Remover pavement powdered form.

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

Printed Concrete

Techmocrom Desmoldeante Basic Release Agents

????????

COLOR (orientativo) CONSUMPTION

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Remover pavement powdered form.

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

0,2 kg/m2

Printed PavementRelease AgentsPrinted Screed

MoldsProtective Resin

24

PRESENTATION

PRESENTATION

MoldsTechmocrom Moldes Molds

MODELOS

Techmocrom Moulds: Moulds printed flooring and facades (See other molds)

Examples of ApplicationThe product family Techmocrom allows the design of a new concept in urban landscapes, whether rustic or modern, for developments, walks, parks, squares, pedestrian streets, playgrounds, pools, fairgrounds, etc.

The main advantages are Printed Techmocrom Pavement durability, high resistance to inclement weather and fast commissioning work. A paviment adaptable to indoor and outdoor. High quality, solidity and design.

Printed ConcretePrinted Pavement

Release AgentsPrinted Screed


25

Techmocrom CM-ESP Brillante Protective Resin

Bright Transparent


Colourless compound made from special resins, with excellent hardness, resistance to UV, moisture and abrasion, specifically formulated for use as a liquid curing and protective film and decorative printed pavement. With shiny appearance.

Bottle of 5 l.Bottle of 25 l.

5 m2/l.

Protective Resin

Techmocrom FRC Protective Resin

MateYellowish


Composite carefully balanced to provide the excellent cured concrete and maximize performance. Control the evaporation of water and hydration, slowing the drying time in order to increase its hardness characteristics.

Bottle of 25 l.10 - 12 m2/l.

Techmocrom CM Mate Protective Resin

Mate Yellowish


Composite made from special resins, with excellent hardness, resistance to UV, moisture and abrasion, specifically formulated fluid to be used as curing decorative and protective film on the pavement printed. With matte appearance.


7 - 9 m2/l.

Techmocrom EBT Protective Resin

White liquid


Water-based resin with excellent hardness, resistant to UV, moisture and abrasion, specially formulated as a protective layer for the pavement printed. For curing pavement.

Bottle of 25 l.5 m2/l.

Printed Concrete

Techmo Pigmento Dye for Cement

COLOR (2%)

Expanded clay for the production of mortar and concrete thermal and acoustic insulation.

DOSAGE PRESENTATION

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 11,35 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Bags of 25 kg.

Yellow 21

Cobalt Blue 50

White 100

Black 905

Black 94

Brown 80

Brown 89

Red 41

Red 44

Green 65

Be applied 2% to 4% of the weight of the cement

according hue

Dye for Cement

Dye for Cement Pigment

Printed PavementRelease AgentsPrinted Screed


26

Fibers

Techmofiber M-12 Polypropylene Fibers

Plus

6

900

Plus

6

900

100% polypropylene fiber, specially designed for use in concrete, prevents the appearance of shrinkage cracks motivated, substantially improving the quality of the concrete structure executed.

LENGTH PRESENTATIONCONSUMPTION

12 mm. 600gr/m3 Bags of 600 gr.Bags of 1 kg.

Techmofiber Plus 6 mm. Polypropylene FibersHomopolymer polypropylene fibers 100% virgin containing dispersant additives. Specially designed and manufactured under ISO for use as a concrete reinforcement min. 0.1% by volume.

LENGTH PRESENTATION

6 mm.

CONSUMPTION

600gr/m3 Bags of 900 gr.

Polypropylene Fibers

Polypropylene copolymer plastic fiber quality.

Techmofiber Estructural 50 mm. Polypropylene Fibers

50 mm.

LENGTH PRESENTATIONCONSUMPTION

Aprox. 3 - 6 kg/m3 Bags of 4 kg.

Techmofiber E-3 - Techmofiber E-6 Techmofiber E-12 Polypropylene Fibers

Polypropylene fiber to avoid fissures in the concrete.

LENGTH PRESENTATION

3 mm.6 mm.12 mm.

CONSUMPTION

600 gr/m3 Bags of 600 gr.

Steel FIbersPolypropylene Fibers

Cellulose Fibers

Techmofiber Acero 50/1,0 Steel Fibers

Fiber reinforcement wire for concrete, cold-deformed to allow optimum anchorage of the concrete mix Shotcrete special flooring, etc. *

20 kg/m3 concrete

Boxes de 20 kg.A= 1,00 mm.B= 50,00 mm.C= 2,00 mm.D= 5,00 mm.

CONSUMPTION PRESENTATIONSIZE

*For other sizes consult our Technical Department.

Steel FibersTechmofiber Acero 36/0,7 Steel Fibers

Wire fiber for reinforcing concrete, cold-deformed to allow optimum anchorage of the concrete mix Shotcrete special flooring, etc.

CONSUMPTION PRESENTATION

20 kg/m3 concrete

Boxes de 20 kg.

*For other sizes consult our Technical Department.

A= 0,70 mm.B= 36,00 mm.C= 2,00 mm.D= 5,00 mm.

SIZE

Techmofiber Acero Ondulada Plana 50/2,5 Steel FibersWire fiber for reinforcing concrete, cold-deformed to allow optimum anchorage of the concrete mix Shotcrete special flooring, etc.


20 kg/m3 concrete Boxes de 20 kg.

Techmofiber Acero Ondulada Redonda 50/1,0 Steel FibersWire fiber for reinforcing concrete, cold-deformed to allow optimum anchorage of the concrete mix Shotcrete special flooring, etc.


20 kg/m3 concrete Boxes de 20 kg.

Techmofiber M-6 Polypropylene Fibers100% polypropylene fiber, designed for use with mortar, thus avoiding the appearance offissures driven by traction and microcracking in the phase setting of the mortar.

LENGTH PRESENTATION

6 mm. 600gr/m3

CONSUMPTION

Bags of 600 gr.

Cellulose Fibers

Techmofiber Cellulose 315 Cellulose FibersPalletized semicomprimida cellulosic fiber.


View technical Boxes de 3 kg.Big bags of 500 kg.

Techmofiber Cellulose 450 Cellulose FibersCellulosic fiber organic additives.

Boxes de 3 kg.Big bags of 400 kg.


View technical

27

Aggregates AggregatesWearing Course

Techmorod Corindón Wearing Course

Corundum for special pavements, for wearing courses.

CONSUMPTION APROX. PRESENTATION

To trowelled:4 kg/m2

Bags of 25 kg.M2: 1- 2 mm.Consultar outrostamanhos

GRANULOMETRY

Techmorod Cuarzo Corindón 25% Wearing Course

Coloured cement based flooring with high quality aggregates, Bayer pigments and plasticizers and binders. (Refer colours).

Consult Bags of 25 kg.Seleccionada

COLOR PRESENTATIONGRANULOMETRY

Wearing CourseTechmorod Silice Wearing Course

Special silica resin flooring and plastering and realization of concrete.

CONSUMPTION APROX. PRESENTATION

0,150 - 0,115 mm.0,2 - 0,4 mm.0,2 - 0,8 mm.0,3 - 0,6 mm.

0,7 mm.1 - 2 mm.

0 - 3 mm.0 - 5 mm.3 - 5 mm.

GRANULOMETRY

Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.

To trowelled:4 kg/m2

For resins, consult the

product data sheet to combine Aggregates

Techmo Marmolina Aggregates

Calcite marble with light veining associated calcite muscovite flakes.

According to use Bags of 25 kg.0 - 0,9 mm.

CONSUMPTION APROX. PRESENTATIONGRANULOMETRY

Techmo Dolomita Aggregates

Mineral sedimentary rock composed of calcium carbonate and magnesium.

White Bags of 25 kg.Selected


Techmorod Cuarzo Corindón 50% Wearing Course

Coloured cement based flooring with high quality aggregates, Bayer pigments and plasticizers and binders. (Refer colours).

Consult Bags of de 20 kg.Seleccionada


Techmorod Granza de Caucho Wearing Course

Rubber crushed to prepare various floors.

Black Bags of 25 kg.1 - 4 mm.


Techmorod Microesferas de Vidrio Wearing Course

Glass Spheres dusting on or slip marking paints.

Transparent Bags of 25 kg.Seleccionada


28

Techmofrol 50 Parting

White milky liquid

FISICAL APPEARANCE PRESENTATION

Bottle of 25 l.Cans of 200 l.Cages of 1.000 l.

Oil concrete release agents for emulsifiable in water. 50% solid

DOSAGE APPROX.

1L. for 38 m2


White milky liquid



Oil concrete release agents for emulsifiable in water. 75% solids.

DOSAGE APPROX.

1L. for 25 m2


Light Bellow oil



Oil concrete release agents for emulsifiable in water. 100% solids.

DOSAGE APPROX.

1L. for 25 m2

PartingTechmofrol E-25 Parting

Milky oil



Release agent which prevents adhesion of concrete or mortar to release agents.

DOSAGE APPROX.

1L. for 35 m2

Techmofrol EPA Parting

White liquid


Bottle of 5 l.Bottle of 10 l.Bottle of 25 l.Cans of 210 l.Cages of 1.000 l.

Oil release agent for all kinds of formwork, mainly absorbers.

DOSAGE APPROX.

1L. for 20 – 40 m2

AdditivesParting

Conservators

WaterproofingPolyfunctional

Superplasticizers

Air Entraining/Retardants

LevelingAccelerators

Other Additions

ConservatorsTechmocure C Conservators

White Liquid


Bottle of 5 l.Bottle of 25 l.Cans of 200 l.Cages of 1.000 l.

Liquid curing fresh concrete.

DOSAGE APPROX.

150 - 200 ml/m2

Techmocure E Conservators

White Liquid



Product based curing paraffins, fresh concrete and mortar.

DOSAGE APPROX.

150 - 200 ml/m2

Techmocure RA Conservators

White Liquid



Liquid white pigmented curing concrete.

DOSAGE APPROX.

150 - 200 ml/m2

Techmocure RP Conservators

Translucent Yellowish Liquid



Liquid Curing Concrete.

DOSAGE APPROX.

150 - 200 ml/m2

Techmocure WR Conservators

White Liquid



Curing agent for concrete and mortar.

DOSAGE APPROX.

150 - 200 ml/m2

29

Additives

Techmofrol Vegetal 110 Parting

Light yellow liquid


Bottle of 30kg.Cans of 220 kg.Cages of 1.000 l.

Strippers vegetable based.

DOSAGE APPROX.

1 L for 40 m2

Techmofrol Vegetal 111 Parting

Wight liquid


Bottle of 5 kgBottle of 10 kgBottle of 25kg.Cans of 220 kg.

Release Agent for obtaining high quality finishes. It works by preventing the concrete adhering to the forms.

DOSAGE APPROX.

20 – 50 g/m2

Techmofrol Vegetal 112 Ecológico Parting

White liquid


Bottle of 25kg.Cans of 220 kg.Cages of 1000 kg

Strippers biodegradable high performance concrete.

DOSAGE APPROX.

10 – 50 g/m2

Techmofrol Cera Parting

White emulsion


Bottle of 25kg.Cans of 220 kg.Cages of 1000 kg

Strippers low viscosity for precast concrete in all it seeks a smooth surface finish and flawless.

DOSAGE APPROX.

Consult

Techmofuge 1 Waterproofing

Yellow liquid


Bottle of 5 kg.Bottle of 10 kg.Bottle of 25 kg.Drums of 200 kg.

Liquid Waterproofing mortar and concrete. Chloride free.

DOSAGE APPROX.

Mortar thickness 0.25 kg/m2/cm

Concrete: 3% of cement weight

Techmofuge 1 ADMIX Waterproofing

White liquid


Bottle of 5 kg.Bottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.

Liquid repellent for concrete, mortar and cement pastes.

DOSAGE APPROX.

About 0.5-3.0% of cement

weight

WaterproofingTechmofuge P Waterproofing

Powder


Waterproof Waterproofing Powder for concrete and mortar.

DOSAGE APPROX.

1.5 to 3%of cement

weight

Bags of 20 kg.Bags of 25 kg.

Techmofuge 1 Precast Waterproofing

White liquid


Bottle of 25 kg.Drums of 240 kg.Cages of 1000 kg.

Liquid repellent for concrete, mortar and cement pastes.

DOSAGE APPROX.

About 1 – 3.0% of cement

weight

Techmofrol Rápido Parting

Oily liquid


Bottle of 25 L.Cans of 200 L.Cages of 1000 L.

Strippers for all types of precast concrete in which one intends to fast stripping.

DOSAGE APPROX.

Consult

Techmofrol Mineral Parting

Brown liquid


Bottle of 5 l.Bottle of 10 l.Bottle of 25 l.Cans of 210 l.Cages of 1.000 l.

Strippers ore direct employment.

DOSAGE APPROX.

View technical

PartingConservators


Superplasticizers



Other Additions

30

AdditivesParting

Conservators


Superplasticizers



Other Additions

31

Techmofuge HI Waterproofing

Colourless liquid



Additive for concrete waterproofing.

DOSAGE APPROX.

About 0.5 – 25% of cement

weight

Techmofuge 2 Precast Waterproofing

White liquid



Additive special precast concrete waterproofing.

DOSAGE APPROX.

About 1 – 3.0% of cement

weight

Techmofuge N Waterproofing

Brown liquid


Bottle of 5 l.Bottle of 10 l.Bottle of 25 l.Drums of 200 l.

Fluid additive plasticized concrete and waterproof. Chloride free.

DOSAGE APPROX.

About 0.5 % of cement

weight

Techmoment 928 GV Polyfunctional

Brown liquid


BulkBottle of 25 kg.Bottle of 200 kg.Bottle of 1000 kg.

Plasticizer versatile high performance concrete.

DOSAGE APPROX.


weight

PolyfunctionalTechmoment 920 Polyfunctional

Brown liquid


BulkBottle of 25 kg.Bottle of 200 kg.Bottle of 1000 kg.

High performance multifunctional additive for concrete preparation.

DOSAGE APPROX.

About 0.6 – 1.2 % of cement

weight

Techmoment 932 Polyfunctional

Brown liquid


BulkBottle of 25 kg.Bottle of 220 kg.Cages of 1200 l.

Polyfunctional additive for concrete preparation.

DOSAGE APPROX.

About 0.4 – 0.8% of cement

weight

Techmoment 930 Polyfunctional

Brown liquid



Plasticizer versatile high performance readymix concrete.

DOSAGE APPROX.


weight

PartingConservators


Superplasticizers



Other Additions

32

Techmocem 2 Plasticizers

Dark liquid



Plasticizer / water reducer high performance concrete.

DOSAGE APPROX.

About 0.1% of cement

weight

Techmoprecast P00 Plasticizers

Reddish liquid


BulkBottle of 25 kg.Drums of 220 kg.Cages of 1000 kg.

Rheology Modulator for prefabricated dry consistency. Implemented by vibro-compresion.

DOSAGE APPROX.


weight


Dark liquid



Plasticizer for prefabricated light.

DOSAGE APPROX.


weight


Yellowish liquid



Modulator rheology additive for dry consistency prefabricated applied by extrusion.

DOSAGE APPROX.


weight

Techmocrete 1001 Polyfunctional

Brown liquid



Concrete Additive prepared polyfunctional.

DOSAGE APPROX.


weight


Brown liquid



Concrete Additive polyfunctional prepared.

DOSAGE APPROX.


weight


Brown liquid




DOSAGE APPROX.


weight

Additives


Brown liquid




DOSAGE APPROX.


weight


Brown liquid



Concrete Additive prepared polyfunctional.

DOSAGE APPROX.


weight

PlasticizersTechmocem W90 Plasticizers

Dark liquid


BulkBottle of 30 kg.Bottle of 250 kg.Cages of 1250 kg.

Plasticizer / water reducer DIN EN 934.2

DOSAGE APPROX.

About 4.0 – 9.0% of cement

weight

PartingConservators


Superplasticizers



Other AdditionsAdditives

33

Techmocem 200R Superplasticizers

Brown liquid



Superplasticizer / high water reducing activity.

DOSAGE APPROX.

About 0.8 – 2 % of cement

weight

Techmocem 204R Superplasticizers

Brown liquid




DOSAGE APPROX.


weight


Brown liquid



Modulator rheology additive for dry consistency prefabricated vibrocompression applied.

DOSAGE APPROX.


weight

Techmocem 120 Superplasticizers

Brown liquid



Superplasticizer / water reducing high level according to DIN EN 934-2.

DOSAGE APPROX.

About 0.08 – 0.8 % of binder

weight

Superplasticizers


Consult



Superplasticizer / water reducer high performance concrete.

DOSAGE APPROX.

Consult

Additives

34

Air Entraining / RetardantsTechmo Mort-Plast Plasticizers

Green Liquid



Additive liquid plasticizer / aerating, mortar, free from chlorides.

DOSAGE APPROX.

0.5% by weight of

binder


Liquid bluish-gray



High Performance Superplasticizer for concrete.

DOSAGE APPROX.


weight

Techmocrete C703 Superplasticizers

Greenish Liquid



Superplasticizer / water reducer high activity for self-compacting concrete.

DOSAGE APPROX.


weight

Techmocrete C704 Superplasticizers

Turbid Yellowish

Liquid




DOSAGE APPROX.


weight

Techmocrete CS704 Superplasticizers

Turbid Yellowish

Liquid




DOSAGE APPROX.


weight

Techmoprecast S10 Superplasticizers

Yellowish Liquid



Additive superplasticizer, water reducer, high activity for precast concrete.

DOSAGE APPROX.


weight

Techmo Mort-Plast G-3 Plasticizers

Dark Brown Liquid



Additive aerating / plasticizer for mortar free of chloride.

DOSAGE APPROX.

0.1 – 0.5% by weight of

binder

Techmo Retard Hormigón Retardants

Translucent Blue Liquid


Bottle of 30 kg.Drums of 250 kg.

Concrete set retarder.

DOSAGE APPROX.

0.5 – 2.5% on weight of cement

Techmoprecast S20 Waterproofing

Yellowish Liquid



Additive superplasticizer, water reducer high activity for precast concrete.

DOSAGE APPROX.


weight

PartingConservators


Superplasticizers



Other Additions

Additives

35

Techmo Air Retard Mortero RM50 Retardants

Brown Liquid



Retarder / aerating setting for mortar.

DOSAGE APPROX.

0,06-0,7% SPC

Techmo Retard Hormigón H77R Retardants

Translucent Liquid



Concrete set retarder.

DOSAGE APPROX.


Techmo Air Retard Mortero Retardants

Brown Liquid



Retarder / aerating setting for mortar.

DOSAGE APPROX.

0.8 – 1% on weight of cement

Techmo Retard Mortero Retardants

Brown Liquid


Bottle of 6 kg.Bottle of 30 kg.Drums of 250 kg.

Additive retardant / water reducer DIN EN 934.2

DOSAGE APPROX.

2 – 3% on weight of cement

Techmo Air Retard Mortero RM65 Retardants

Translucent Blue Liquid



setting retardant additive for mortar.

DOSAGE APPROX.


AcceleratorsTechmo Accelerators Accelerators

setting accelerating admixture for concrete free of chlorides.

Translucent Liquid



DOSAGE APPROX.

1 – 4 % on weight of cement

Techmo Accelerators MA 103 Acceleratorssetting accelerator for mortar and concrete.

Greenish Liquid



DOSAGE APPROX.


Techmo Nivel S-93 Leveling

Yellow Liquid


Bottle of 5l.Bottle of 10l.Bottle of 25l.Drums of 200l.

superplasticizer additive effect for the preparation of cohesive self-leveling mortars.

DOSAGE APPROX.

1 – 3% on weight of cement

LevelingTechmo Nivel G-92 Leveling

Dark reddish Liquid



Special additive for masonry mortar for leveling screeds.

DOSAGE APPROX.


Techmo Nivel M-1 Leveling

Turbid Yellowish

Liquid


Bottle of 25kg.Drums of 200kg.Cages of 100kg

Additive effect superplasticizer cohesive for preparing high quality self-leveling mortars.

DOSAGE APPROX.

1.0 – 2.5 % on weight of cement

PartingConservators


Superplasticizers



Other Additions

Additives

36

Techmo Fume SD92 Other Additions

Gray powder


Addition of silica fume base.

DOSAGE APPROX.

Concrete high durability and resistance: 10% by

weight of cement.Concrete normal: 5-10% by

weight of cement.Shotcrete: 5% by weight of

cement

Bags of 20 kg.

Techmo Antigel Other Additions

Brown Liquid


Bulk tankDrums of 250l.Cages of 1000l.Cages of 1200l.

antifreeze additive for concrete and mortar.

DOSAGE APPROX.

0.5 – 2 % on weight of cement

Techmo Arcilla Expandida G12/20 Other Additions

Rounded clay lightweight aggregate


Bags of 50 l.Big-Bags

Expanded clay for mortar and concrete obtaining thermal and acoustic insulation.

DOSAGE APPROX.

View technical

Techmo Arcilla Expandida M4/10 Other Additions

Rounded clay lightweight aggregate


Bags of 50 l.Big-Bags

Expanded clay for mortar and concrete obtaining thermal and acoustic insulation.

DOSAGE APPROX.

View technical

Techmo Perlas de Poliestireno Expandido Other Additions

Beads for obtaining thermal and acoustic insulating mortar.

Pearl White


Bags of 400 lt.Bags of 500 lt.

DOSAGE APPROX.

1 bag of 400 l. concrete

Other AdditionsTechmo Nanosilice Other Additions

Consult


Bottle of 25 kg.Bottle of 200 kg.Drums of 1000kg

Suspension of nanosilica grading curves for correction.

DOSAGE APPROX.

Consult

PartingConservators


Superplasticizers



Other Additions

Films

Anti-Impact FilmsTechmo Lam Impact Anti-Impact Films

Techmo Lam Impact 3Techmo Lam Impact 5Techmo Lam Impact 10

DENOMINATION

Expanded polypropylene sheet, bristle closed soundproofing against impact noise.

ROLTHICKNESS

3 mm.5 mm.10 mm.

1,5 x 150 m.1,5 x 100 m.1,0 x 41 m.

Techmo Lam Impact Aluminio 2caras Anti-Impact FilmsPrint termoreflectora insulation consisting of a PE foam sheet with a double layer of aluminum.

ROLTHICKNESS

4 mm. 1,2 x 95 m.

Insulating SheetsTechmo Lam Termic Insulating Sheets

Insulators "traditional" are effective only acting on the heat received by conduction and convection, but do not act before the radiation heat transfer. LAM Techmo TERMIC insulators, are effective against all three types of heat transfer. Through its outer sheets of pure aluminum, reflect get 97% of the heat received by radiation, whereas with l / s foil / s of dry air internal to avoid temperature changes between both sides of the insulation and therefore heat transfer Conducted / convention.

DENOMINATION COMPOSITIONTHICKNESS COILS

4 mm. Dry Air bubbles + Plastic + Aluminum

1,2 x 50 m.

4 mm. Dry Air bubbles + Plastic + Aluminum

1,2 x 50 m.

8 mm. Dry Air bubbles + Plastic + Aluminum + Air dry Foam

1,2 x 25 m.

9 mm. Aluminum + DoubleDry air bubbles dry air + Foam + Aluminum

1,2 x 25 m.

18 mm. 2 leaves + 2 aluminum sheets bubbles +2 Wadding reflective sheet

1,53 x 15 m.

Termic S

Termic 10

Termic SYC

Termic DBFO40

Multi Termic

Techmo Lam Impact Plus Anti-Impact Films

8 mm.

Special Complex, made with high quality polyethylene by direct extrusion process and physical expansion.

ROLTHICKNESS

1,5 x 45 m

Techmo Lam Impact NOVO Anti-Impact Films

Techmo Lam Impact NOVO 5 mm.Techmo Lam Impact NOVO 10 mm.

DENOMINATION

Pololefina elastomeric foam. Sound insulation impact.

ROLTHICKNESS

5 mm.10 mm.

1,5 x 70 m.1,5 x 42 m.

Techmo Lam Impact Parquet Anti-Impact FilmsComplexes laminated parquet and laminated flooring.

ROLTHICKNESS

2,5 mm. 1,5 x 100 m.

Techmo Lam Impact Foam + Aluminio 1cara Anti-Impact FilmsComplex made with honeycomb polyethylene foam, closed-cell uncrosslinked, and metallized polyester film.

ROLTHICKNESS

5 mm. 1,5 x 50 m.

Techmo Lam Impact Silent Plus Anti-Impact Films

8 mm.

Polyethylene high reticular expanded insulating power.

ROLGROSOR

1,5 x 45 m

Insulating SheetsAnti-Impact Films

Blades DrainageSealing Bands

37

38

Sealing BandsTechmo Bituband 5000HD Sealing Bands

THICKNESS

Membrane adhesive, self-protected with a polyethylene film of cross-laminated high density.

ROL

1,5 mm. 1,00 x 20 m.0,30 x 20 m.0,20 x 20 m.0,15 x 20 m.

Techmo Butilband Geotex 300 Sealing Bands

THICKNESS

Self-adhesive tape protected with aluminum or copper foil.

ROL

Consult 0,30 x 10 m.

Techmo Bituband 5000HD ALU Sealing Bands

THICKNESS

Self-adhesive tape protected with aluminum or copper foil.

ROL

Consult 1,00 x 10 m.0,30 x 10 m.0,20 x 10 m.0,15 x 10 m.

Techmo Lam Dren Geotextil Blades Drainage

Prints nodular HDPE for waterproofing of walls and foundations. Color black.

ROLMATERIAL

Polyethylene + Geotextile Thermal bonding

2 x 20 m.

Techmo Boton Lam Dren Max Blades Drainage

PRESENTATION

Boxes of 200 points and 200 buttons

Buttons and tips for gripping sheet Lam Techmo Dren.

Films

Polypropylene geotextilesTechmo Geotex PP Polypropylene geotextiles

TYPE ROLS

Series nonwoven polypropylene geotextiles, short fiber, linked mechanically or thermally.

WEIGHT

2,20 x 125 m.120 g/m2PP 120

2,20 x 125 m.125 g/m2PP 125

2,20 x 125 m.150 g/m2PP 150

2,20 x 100 m.200 g/m2PP 200

2,20 x 75 m.300 g/m2PP 300

2,20 x 60 m.500 g/m2PP 500

2 x 25 m.1000 g/m2PP 1000

GeotextilesPolyester Geotextiles

Polypropylene geotextiles

Polyester GeotextilesTechmo Geotex PES Polyester Geotextiles

TYPE ROLS

Felts geotextiles consisting of polyester staple fiber nonwoven bonded by clamping.

WEIGHT

2,20 x 125 m.120 g/m2PES 120

2,20 x 125 m.150 g/m2PES 150

2 X 90 m.2,20 x 75 m.

300 g/m2PES 300

2,20 x 100 m.200 g/m2PES 200

2,20 x 60 m.500 g/m2PES 500

2 X 25 m.1000 g/m2PES 1000

Blades DrainageTechmo Lam Dren Max Blades Drainage

Prints nodular HDPE for waterproofing of walls and foundations. Color black.

ROLMATERIAL

Polyethylene 2 x 25 m.

Techmo Butilband Geotex 150 Sealing BandsSelf-adhesive tape protected with aluminum or copper foil.

ROL

0,15 x 10 m.

THICKNESS

Consult

Insulating SheetsAnti-Impact Films

Blades DrainageSealing Bands

Mesh Mesh

Techmotex Fill 77 Malla Pintura Mesh

White

COLOR

Mesh for reinforcement, and waterproofing paint.

PRESENTATIONMATERIAL

Fiberglass ROLs de 1 x 50 m.

Techmotex 99 Revoco Mortero Mesh

Blue

COLOR

Mesh for reinforcing plaster mortar line for encounters between different materials.



Mesh

Techmotex 44 Malla Yeso Mesh

White

COLOR

Mesh reinforcement for plaster and gypsum plasters.



Techmotex Velofill 99 Mesh

White

Velo fiberglass.

COLOR PRESENTATIONMATERIAL


39

Techmotex Malla Balizamiento Mesh

Orange

COLOR

Mesh safety signs.


Polyethylene ROLs de 1 x 50 m.

Techmotex Malla Ocultación 100% MeshMesh concealment.

Black


Polyethylene ROLs de 1 x 50 m.

Techmotex Malla Ocultación 70% MeshHiding mesh.

Black


Polietileno ROLs de 1 x 50 m.

Structural Reinforcement Systems StrapsBooster Blades

Carbon FibersBooster Blades

40

Techmo Carbolam L-50/1,2 Carbon Fibers. Booster Blades

Gray

COLOR

Structural reinforcement system consisting of unidirectional sheets high mechanical ability.

PRESENTATION

100 m.


Gray

COLOR


PRESENTATION

100 m.


Gray

COLOR


PRESENTATION

100 m.


Gray

COLOR


PRESENTATION

100 m.


Gray

COLOR


PRESENTATION

100 m.


Gray

COLOR


PRESENTATION

100 m.


Gray

COLOR


PRESENTATION

100 m.


Gray

COLOR


PRESENTATION

100 m.

Techmodur Carbolam R-20 Carbon Fibers. Booster Blades

Consult

COLOR

Epoxy structural adhesive for CARBOBAND Techmo B-30/225 system.

PRESENTATION

Lot A+B de 5 kg.

Techmo Carbolam Imprimación Carbon Fibers. Booster Blades

Consult

COLOR

Two component epoxy resin for bonding reinforcement sitema Techmo Carbolam L.

PRESENTATION

Lot A+B de 5 kg.

Techmo Carboband R-30 Carbon Fibers. Straps

Consult

COLOR

Two component epoxy resin for bonding reinforcement sitema Techmo Carboband B-30/225.

PRESENTATION

Lot A+B de 5 kg.

Techmo Carboband Imprimación Carbon Fibers. Straps

Consult

COLOR

Two component epoxy resin for bonding reinforcement sitema Techmo Carbolam L.

PRESENTATION

Lot A+B de 5 kg.DIMENSIONS

DIMENSIONS

DIMENSIONS

DIMENSIONS

DIMENSIONS

DIMENSIONS

DIMENSIONS

50/1,2 mm.

60/1,2 mm.

100/1,2 mm.

120/1,2 mm.

50/1,4 mm.

60/1,4 mm.

100/1,4 mm.

DIMENSIONS

120/1,4 mm.

Carbon FibersStrapsTechmo Carboband B-30/225 Carbon Fibers. Straps

Gray

COLOR

Structural reinforcement system tissue formed by unidirectional carbon fiber.

PRESENTATION

150 m.

DIMENSIONS

30/225 mm.

Bituminous Emulsions

Techmo Asfalt-A2 Bituminous Emulsions

Black

COLOR

Waterproofing bitumen emulsion and easy handling pasty at room temperature.

PRESENTATIONCONSUMPTION

0.250 – 0.500 kg/m2 two layer

Cans of 5 kg.Cans of 25 kg.Cans of 35 kg.

Techmo Asfalt-AS Bituminous Emulsions

Black

COLOR

Waterproofing bitumen emulsion semiliquid consistency and high workability at room temperature.


0.500 – 0.750 kg/m2 two layer


CoatingsProtection and Waterproofing

41

Techmo Asfalt-Caucho Bituminous Emulsions

Black

COLOR

Rubber asphalt emulsion waterproofing. Due to their properties gives a great result in the waterproofing of all types of roofs, walls and walls. Also used as a steam barrier adhesive and as thermal insulation boards, such as extruded polystyrene.


0,300 kg./m2 Cans of 25 kg.

Waterproofing Paints MonocomponentTechmo Imper 420 Waterproofing Paints. Monocomponent

GrayWhiteRedGreen

COLOR

Acrylic paint occasionally trafficable waterproofing.


Consult Cans of 25 kg.

Techmo Imper 430R Waterproofing Paints. Monocomponent

GrayWhiteRedGreenTile Transparent

COLOR

Treatment, maintenance and restoration of waterproofing.


Approx.1.5 – 2.0 kg/m2

Cans of 5 kg.Cans of 20 kg.

Techmo Imper 500 PoliuretanoWaterproofing Paints. Monocomponent

GrayWhiteRedTile

COLOR

Impermeabilizing component polyurethane based, weather resistant and highly elastic. When polymerized form one continuous elastomeric membrane. Passable.


Approx. 1.500 kg/m2

Two layer

Cans of 10 kg.

Techmo Imper 501 POL Aqua Waterproofing Paints. Monocomponent

GrayRedOxideOthers

COLOR

Liquid polyurethane membrane for waterproofing. Certified for potable water contact.


1.5 kg/m2 a 2kg/m2 (1.4 mm – 1 .9 mm of

thickness) two layers


Techmo Imper 502 Waterproofing Paints. Monocomponent

Transparent

COLOR

Elastic aliphatic polyurethane resin, solvent-based monocomponent, moisture curable.


1,50 - 2 kg/m2 Cans of 4 kg.Cans of 9 kg.Cans of 20 kg.

Techmo Asfalt F Bituminous Emulsions

Black

COLOR

Fiber asphalt emulsion for waterproofing bridge decks.


0,300 kg./m2 Cans of 25 kg.

Techmo Imper 500 Alifático PoliuretanoWaterproofing Paints. Monocomponent

White

COLOR

Polyurethane based waterproofing component, weatherproof, UV-and high elasticity. When polymerized form one continuous elastomeric membrane. Passable.


Approx. 1.500 kg/m2

Two layer

Cans of 25 kg.

Waterproofing Paints. MonocomponentBituminous Emulsions

Waterproofing Paints. BicomponentHydrophobic Impregnations


Techmo Imper 503 POL Waterproofing Paints. Monocomponent

Transp.

COLOR

Polyurethane membrane for waterproofing liquid and transparent.


(60%) is 1.5 to 2 kg/m2(0.9 to 1.2 mm thick)applied at 2/3 layers


42

Waterproofing Paints BicomponentTechmo Imper 510 Waterproofing Paints. Bicomponent

Black

COLOR

Two-component polyurethane waterproofing cold applied solvent free, suitable for potable water.


Consult Lot 5 kg.Lot 25 kg.

Techmo Imper 512 B Waterproofing Paints. Bicomponent

Black

COLOR

Polyurethane Waterproofing with bitumen, cold applied bicomponent.


Consult Lot 40 kg.

Techmo Imper 515 Waterproofing Paints. Bicomponent

GrayTileBeige

COLOR

Waterproofing bicomponent curing hot melt faster without solvents, applied hot spraying machine.


Consult Lot of 400 kg.

Techmo Imper 516 Poliurea Waterproofing Paints Bicomponent.

GrayRedWhite

COLOR

Waterproofing polyurea base, application-component fast curing hot solvent, applied hot spraying machine. Suitable for drinking water.


2,7kg/m2 Lot of A+B 400 kg.

Techmo Imper 517 Poliurea HíbridaWaterproofing Paints. Bicomponent

GrayTileBeige

COLOR

Hybrid polyurea waterproofing base, hot melt bicomponent, slightly slower curing, solvent, applied hot spraying machine.


Consult Lot of 400 kg.




Techmo Hidrosil 304 F Hydrophobic Impregnations

Colourless Liquid

APPEARENCE

Impregnating solvent based waterproofing facade with fungicidal.


Aprox. 200 - 500 g/m2 Bottle of 25 l.

Hydrophobic ImpregnationsTechmo Hidrosil AQUA Hydrophobic Impregnations

Colourless Liquid

APPEARENCE

Waterproof colorless water repellent and dirt.


Aprox. 200 - 500 g/m2 Bottle of 5 l.Bottle of 20 l.Bottle of 25 l.

Techmo Hidrosil Oilstop Hydrophobic Impregnations

White Liquid

APPEARENCE

Colourless water repellent impregnation and oils for unglazed tiles.


Aprox. 100 - 200g/m2 Bottle of 5 l.

Techmo Hidrosil 304 Hydrophobic Impregnations

Colourless Liquid

APPEARENCE

Product transparent silicon based, breathable, waterproof and waterproof.


Aprox. 200 - 250 g/m2 Bottle of 5 l.Bottle of 16 l.Bottle of 25 l.

Techmo Hidrosil Gres Hydrophobic Impregnations

Liquid

APPEARENCE

Colourless waterproofing impregnation for unglazed tiles, porous ceramic tiles, exposed brick, natural stone, etc.


100 - 200 gr/m2 Bottle of 5 l.

Techmo Limp Graffitti Hydrophobic Impregnations

Liquid

APPEARENCE PRESENTATION

Bottle of 5 l.

Limpador de graffittis universal para superfícies absorventes, não absorventes e superfícies delicadas.

CONSUMPTION

According use

Techmo Anti Graffitti Hydrophobic Impregnations

Liquid


Bottle of 30 kg.

Producto líquido, sem dissolvente, formulado sobre base de copolímeroscom efeito anti - grafitti.

CONSUMPTION

According use

Techmo Mineralizador Hydrophobic Impregnations

Liquid


Bottle of 35 l.

Mineralizer, moisture sealant, leaks and waterways.

CONSUMPTION

According use

43



Pavement SystemAsphalt And Acrylic

44

Asphalt PavementsTechmo Asfalto en Frío Asphalt Pavements

Black

COLOR PRESENTATION

Cans of 25 kg.

Asphalt repair base and road repairs.

CONSUMPTION

Approx. Kg/m2 and 21 cm thickness

Techmo Slurry Asfáltico Asphalt Pavements

Black

COLOR PRESENTATION


Asphalt pavements to perform, roads, trails.

CONSUMPTION

Approx. 1.5 – 2.5 kg/cm2 and cm of

thickness

Acrylic FlooringTechmo Slurry Acrílico Acrylic Flooring

GreenRedGrayOther

COLOR PRESENTATION

Reinforced cartons of 50 kg.

Acrylic mortar slurry consistency, made of synthetic resin emulsion, graded aggregate and selected pigments.

CONSUMPTION

Approx. 1.5 – 2.5 Kg/m2

* Ver Techmocolor Sellador Acrílico como imprimación al sistema de slurrys acrílicos.

* Ver Techmocolor Slurry T como terminación e igualación del color para sistema de slurrys acrílicos.

Pavement SystemEpoxy

Epoxy FlooringTechmoepox Autonivelante Epoxy Flooring

RAL Colours

COLOR PRESENTATION

Lot A + B 25 kg.

Coating based self-leveling epoxy-quartz. Gives concrete pavements decorative finish to 3 mm thick.

CONSUMPTION

2 kg of final product /1m2/1m

Techmoepox Suelos Epoxy Flooring

RAL Colours

COLOR PRESENTATION

Lot A + B 25 kg.

Colored coating epoxy resin based solvent.

CONSUMPTION

0.2 – 0.3 kg per layer

Techmoepox W Epoxy Flooring

RAL Colours

COLOR PRESENTATION

Lot A + B 25 kg.

Water based epoxy coating for high performance.

CONSUMPTION

200 – 300 g/m2 per 2 or 3 layers

Techmoepox Autonivelante W Epoxy Flooring

RAL Colours

COLOR PRESENTATION

Lot A + B 25 kg.

Epoxy binder for water-based bicomponent preparing self-leveling mortars.

CONSUMPTION

2.7 kg/m2/mm.

Asphalt PavementsAcrylic Flooring

Epoxy FlooringPrimers

45

Techmoepox Multicapa Epoxy Flooring

RAL Colours

COLOR PRESENTATION

Lot A+B 25 kg.

Coating epoxy two component, high solids, suitable for protection of concrete surfaces.

CONSUMPTION

3 kg/m2/mm

Techmoepox Multicapa W Epoxy Flooring

Consult

COLOR PRESENTATION

Lot A+B 25 kg.

Bicomponent epoxy coating, high solids content, suitable for protection of concrete surfaces.

CONSUMPTION

0,7 - 1,0 kg/m2

Techmoepox Multicapa AL Epoxy Flooring

Consult

COLOR PRESENTATION

Lot A+B 25 kg.Lot A+B 40 kg.

Bicomponent epoxy coating, high solids content, suitable for protection of concrete surfaces. With food certificate.

CONSUMPTION

0,6-0,8 kg/m2

PrimersTechmoepox Imprimación Primers

Whitish

COLOR PRESENTATION

Lot A+B de 20 kg.

Epoxy primer polymeric bicomponent continuous pavements.

CONSUMPTION

200 - 300 g/m2

Techmoepox Imprimación Cerámica Primers

Whitish

COLOR PRESENTATION

Lot A+B de 20 kg.

Epoxy primer continuous bicomponent polymeric flooring on damp substrates.

CONSUMPTION

150 - 250 g/m2

Techmoepox Imprimación Humedad Primers

Amber

COLOR PRESENTATION

Lot A+B de 7 kg.

Two component epoxy primer for continuous polymeric flooring on damp substrates.

CONSUMPTION

250 - 350 g/m2

Techmoepox W Imprimación Primers

Amber

COLOR PRESENTATION

Lot A+B de 20 kg.Lot A+B de 25 kg.

Primer bicomponent epoxy resin based on aqueous dispersion.

CONSUMPTION

200 - 300 g/m2

Techmoepox W 1670 Primers

MilkyWhite liquid

COLOR PRESENTATION

Lot A+B de 25 kg.

Epoxy primer water for hardening and consolidation of concrete surfaces.

CONSUMPTION

200 - 0,300 g/m2

Pavement SystemEpoxy Epoxy Flooring

Primers

46

Pavement SystemPolyurethane

Polyurethane PaviementsTechmopol Protec 40 2C Polyurethane Paints

TransparentRAL Colours

COLOR PRESENTATION

Lot A+B 30 kg.

Component aliphatic polyurethane resin finishing and protection of interior and exterior flooring.

CONSUMPTION

4 – 7 m2/kgper layer

Techmopol Protec 60 Polyurethane Paints


COLOR PRESENTATION

Package 4 kg.Package 9 kg.Package 20 kg

Resin-component aliphatic polyurethane finish and protection for indoor and outdoor flooring.

CONSUMPTION

4 – 7 m2/kgper layer

Techmopol Protec W Brillante Polyurethane Paints

Bright TransparentRAL Colours

COLOR PRESENTATION


Lot A+B de 20 kg.

Aliphatic polyurethane resin without solvents, finishing and protection of exterior and interior flooring.

CONSUMPTION

300 gr/m2per layer

Techmopol Protec W Mate Polyurethane Paints

Bright TransparentRAL Colours

COLOR PRESENTATION


Lot A+B de 20 kg.

Esina aliphatic polyurethane solvent free, finishing and protection of exterior and interior flooring.

CONSUMPTION

300 gr/m2per layer

Techmopol Suelos Polyurethane Paints


COLOR PRESENTATION


Single component polyurethane resin for floor finish and interior protection.

CONSUMPTION

150 - 200 gr/m2

Techmopol Protec Piscinas Polyurethane Paints

Transparent

COLOR PRESENTATION


Single component aliphatic polyurethane resin UV stabilized salt water resistant and chlorine.

CONSUMPTION

150 - 200 gr//m2

Techmopol Autonivelante Polyurethane Paints

Red oxideRAL Colours

COLOR PRESENTATION

Lot A+B de 25 kg.

Mortar bicomponent polyurethane leveling 100% solids.

CONSUMPTION

1,3 kg/m2/mm.

Techmopol Autonivelante Flex Polyurethane Paints

Red oxideRAL Colours

COLOR PRESENTATION

Lot A+B de 25 kg.

Flexible mortar leveling, 100% solids.

CONSUMPTION

1,3 kg/m2/mm.

Binders And AdhesivesTechmopol Ligante de Áridos Binders And Adhesives

Transparent

COLOR PRESENTATION

Lot A+B de 25 kg.

Decorative Floor mineral filter.

CONSUMPTION

8 - 12%

Techmopol Ligante de Áridos ESP Binders And Adhesives

Transparent

COLOR PRESENTATION

Lot A+B de 20 kg.

Decorative Pavement filter aliphatic mineral.

CONSUMPTION

8 - 12%

PrimersAdditives

Binders And AdhesivesPolyurethane Paviements

Techmopol Adhepur 100 Binders And Adhesives

Beige

COLOR PRESENTATION

Package 5 kg.

Adhesive elastic polyurethane 100%

CONSUMPTION

0,5 - 1,4 kg/m2

PrimersTechmopol Imprimación Poliuretano Primers

Transparent

COLOR PRESENTATION

Package 4 kg.Package 9 kg.

Package 20 kg.

Primer for polyurethane floors.

CONSUMPTION

150 - 200 g/m2

Techmopol Imprimación Epox Humedad Primers

Transparent

COLOR PRESENTATION

Package 20 kg.

Primer for the application of polyurethane flooring or wet on wet substrates.

CONSUMPTION

300 gr/m2

Techmopol Imprimación Tapa Poros Primers

Transparent

COLOR PRESENTATION

Package 20 kg.

Aromatic polyurethane resin, moisture curable.

CONSUMPTION

150 - 200 gr/m2

Techmopol Imprimación Epox 100 Primers

Transparent

COLOR PRESENTATION


Primer Epoxy flooring.

CONSUMPTION

300 gr/m2

AdditivesTechmopol Aditivo Acelerante Additives

Transparent

COLOR PRESENTATION

Package of 5 kg. y 25 kg.

Accelerator for polyurethane.

CONSUMPTION

1/20 to resinTechmo IMPER

500

Techmopol Aditivo Anti-Slip Additives

Transparent

COLOR PRESENTATION

Package 1 kg.

Additive slip polyurethane flooring.

CONSUMPTION

Combined with 20 kg of

polyurethane resin

Techmopol Aditivo Mateante Additives

Whitish

COLOR PRESENTATION

Package 4 kg.

Additive polyurethane matting for flooring.

CONSUMPTION


polyurethane resin

Techmopol Aditivo Acelerante Super Additives

Transparent

COLOR PRESENTATION

Package of5 kg. y 25 kg.

Super accelerator for polyurethane.

CONSUMPTION

1/20 to resinTechmo IMPER

500

Techmopol Ligante Caucho Binders And Adhesives

Transparent

COLOR PRESENTATION

Package 5 kg.Package 10 kg.Package 25kg.

Aromatic polyurethane resin moisture curable.

CONSUMPTION

8 - 12%

Pavement SystemPolyurethane Primers

Additives


47

Techmopol Cera Brillante Additives

Transparent

COLOR PRESENTATION

Cans of 10 kg.

Wax to protect glossy resin flooring.

CONSUMPTION

Consult

Techmopol Cera Mate Additives

Transparent

COLOR PRESENTATION

Cans of 10 kg.

Wax matting finish for protection resin pavements.

CONSUMPTION

150 gr/m2

Techmopol Pasta Color W Additives

Consult

COLOR PRESENTATION

Cans of 4 kg.

Pasta water based color.

CONSUMPTION

Consult

Techmopol Pasta Color Disolvente Additives

Consult

COLOR PRESENTATION

Cans of 4 kg.

Pasta coloring Techmopol Techmo Imper 500 and Protec. Base solvents.

CONSUMPTION

Consult

Techmopol Aditivo Tixotropante Additives

Transparent

COLOR PRESENTATION

Package 1 kg.

Additive tixotropante based polyurethane.

CONSUMPTION


Techmo imper 500

polyurethane

Techmopol Aditivo Espesante Additives

Consult

COLOR PRESENTATION

Cans of 1 kg.

Additive powder thickener.

CONSUMPTION


polyurethane resin

Pavement SystemPolyurethane Primers

Additives


48

Paintings

Plastic PaintsTechmocolor Pintura Interior Lavable Plastic Paints

WhiteConsult

COLOR PRESENTATION

Cans of 0,75 l.Cans of 4 l.Cans of 15 l.

Plastic paint for walls and ceilings.

CONSUMPTION

8 - 12 m2/l.

Techmocolor Pintura Interior Especial Plastic Paints

WhiteConsult

COLOR PRESENTATION

Cans of 4 l.Cans of 15 l.

Acrylic paint for interior and exterior.

CONSUMPTION

8 - 12 m2/l.

Techmocolor Pintura Especial Fachadas Plastic Paints

WhiteConsult

COLOR PRESENTATION


Plastic paint for interior and exterior with aggressive environment.

CONSUMPTION

8 - 12 m2/l.

Techmocolor Pintura Fachadas Extra Plastic Paints

WhiteConsult

COLOR PRESENTATION


Plastic paint for interior and exterior with aggressive environment.

CONSUMPTION

8 - 12 m2/l.

Paintings StoneTechmocolor Revestimiento Petreo Liso Paintings Stone

WhiteConsult

COLOR PRESENTATION

Cans of 15 l.


CONSUMPTION

1 - 3 m2/l.

Techmocolor Revestimiento Petreo Rugoso Paintings Stone

WhiteConsult

COLOR PRESENTATION

Cans of 15 l.


CONSUMPTION

1 - 3 m2/l.

Sports PaintingsTechmocolor Sport Tennis Sports Paintings

WhiteRedGreen

COLOR PRESENTATION

Cans of 18 kg.

Acrylic paint special sports flooring.

CONSUMPTION

8 - 10 m2/l.

Techmocolor Slurry T Sports Paintings

GrayRedGreenTile

COLOR PRESENTATION

Cans of 15 l.

Painting synthetic resin dispersion for completion and color matching systems Techmo Acrylic Slurry.

CONSUMPTION

8 - 10 m2/l.

Additional PaintingsSilicate Paints

Sports Paintings

Paintings For PoolsPaintings Stone

Plastic Paints

49

Paintings For PoolsTechmocolor Sport Piscinas Paintings For Pools

WhiteBlue

COLOR PRESENTATION

Cans of 15 l.

Acrylic paint for pools.

CONSUMPTION

According use

Techmocolor Sport Piscinas Poliéster Paintings For Pools

Blue

COLOR PRESENTATION

Cans of 4 l.

Polyurethane paint for painting polyester pools.

CONSUMPTION

According use

Silicate Paints

Techmopint Imprimación Silicato Silicate Paints

Colourless

COLOR PRESENTATION

Cans of 4 l.

Fixer potassium silicate based mineral preparing porous supports.

CONSUMPTION

10 – 15 m2/l per layer

Techmopint Silicato Silicate Paints

Consult

COLOR PRESENTATION

Cans of 12 l.

Painting based mineral potassium silicate and inorganic pigments in aqueous solution.

CONSUMPTION

6 – 8 m2/l per layer

Additional PaintingsTechmocolor Trafic Señalización Vial Additional Paintings

WhiteYellow

COLOR PRESENTATION


Cans of 30 l.

Painting signaling acrylic resins in the solvent of a component.

CONSUMPTION

Consult

Techmocolor Aditivo Antimoho Additional Paintings

Consult

COLOR PRESENTATION

Botes de 0,60 gr.

Additive anti-mold for acrylic paints.

CONSUMPTION

0,60gr/1 l.

Techmocolor Sellador Acrílico Additional Paintings

Transparent

COLOR PRESENTATION


Coating 100% acrylic, water-based sealing and protection of a variety of porous surfaces. Leave a glossy natural finish to increase the brightness with the number of layers.

CONSUMPTION

Approx. 4 – 6 m2/kg

Techmocolor Sellador Acrílico Especial Additional Paintings

Transparent

COLOR PRESENTATION

Cans of 15 l.

100% acrylic coating to seal and protect a wide variety of porous surfaces. Leave a glossy natural finish to increase the brightness with the number of layers.

CONSUMPTION

Approx. 4 – 6 m2/kg

Paintings Additional PaintingsSilicate Paints

Sports Paintings

Paintings For PoolsPaintings Stone

Plastic Paints

50

Solvents And Strippers

SolventsTechmopol Disolvente SA 100 Solvents

Transparent

COLOR PRESENTATION

Package 5 kgPackage 10 kg.Package 25kg.

Solvent Additive special epoxies and polyurethanes.

CONSUMPTION

8 - 10%

Techmopol Disolvente SA 100 Retard Solvents

Transparent

COLOR PRESENTATION

Package 4 kgPackage 9 kg.

Package 20 kg.

Special solvent retardant for epoxies and polyurethanes.

CONSUMPTION

Consult

StrippersTechmo Decapante Strippers

Transparent

COLOR PRESENTATION

Package 4 kgPackage 25kg.

Stripper for all paints.

CONSUMPTION

8 - 10%

Techmopol Disolvente Universal Solvents

Transparent

COLOR PRESENTATION


Solvent cleaning tools.

CONSUMPTION

Consult

Slab FilterTechmo Losa Filtrante Slab Filter

Techmo Losa Filtrante R

Stripper System filter flagstones. With insulation.

DENOMINATION THICKNESS INSULATIONTYPES

65 mm.75 mm.85 mm.95 mm.

30 mm.40 mm.50 mm.60 mm.

Special Floors

StrippersSolvents

Slab Filter

51

Separators And Spacers

Armor For Horizontal Separation

Armor For Vertical SeparationUNI Rueda Armor For Vertical Separation

UNI Rueda 15/4 - 10

UNI Rueda 20/4 - 12

UNI Rueda 25/4 - 12

UNI Rueda 30/4 - 12

UNI Rueda 30/6 - 20

UNI Rueda 35/4 - 12

UNI Rueda 35/6 - 14

UNI Rueda 40/5 - 14

UNI Rueda 40/6 - 20

UNI Rueda 50/6 - 14

UNI Rueda 50/6 - 20

TYPE

Spacers shaped plastic circular spacer specially designed as reinforcements in walls, columns, walls and other concrete structures. Has a grip portion of corrugated steel bars of different diameters.

COATINGO STICK

4 - 10 mm.

4 - 12 mm.

4 - 12 mm.

4 - 12 mm.

6 - 20 mm.

4 - 12 mm.

6 - 14 mm.

5 - 14 mm.

6 - 20 mm.

6 - 14 mm.

6 - 20 mm.

15 mm.

20 mm.

25 mm.

30 mm.

30 mm.

35 mm.

35 mm.

40 mm.

40 mm.

50 mm.

50 mm.

UNITS

1.000

500

500

250

125

200

125

125

125

100

50

BK KNOCHEN sin alambre Based Concrete Strippers

BK KNOCHEN 20-25-30

BK KNOCHEN 35-40-50

BK KNOCHEN 45-50-60

TYPE

Spacer for universal use, based on fiber reinforced concrete, three-position, without wires, for fixing corrugated steel bars max diameter 24 mm for concrete coatings from 20 to 50 mm according to the position and type.

COATINGO STICK

To 20 mm.

To 24 mm.

To 28 mm.

20/25/30 mm.

35/40/50 mm.

45/50/60 mm.

UNITS

1.000

250

250

Based Concrete Strippers

BK KNOCHEN con alambre Based Concrete Strippers

BK KNOCHEN 20-25-30 al

BK KNOCHEN 35-40-50 al

TYPE

Spacer for universal use, based on fiber reinforced concrete, three-position wire for fixing corrugated steel bars Max. 24 mm. For concrete coatings 20 to 50 mm. by position and type.

COATINGO STICK

To 20 mm.

To 24 mm.

20/25/30 mm.

35/40/50 mm.

UNITS

500

250

52

ASK TORRE Armor For Horizontal Separation

ASK Torre 15

ASK Torre 20

ASK Torre 25

ASK Torre 30

ASK Torre 40

ASK Torre 50

TYPE

Plastic separator with four locking clamps of different diameter rebar. Appropriate rod crosses meetings horizontal / vertical.

COATINGO STICK

4 - 16 mm.

6 - 14 mm.

4 - 16 mm.

6 - 14 mm.

4 - 16 mm

6 - 14 mm

8 - 18 mm.

6 - 16 mm.

6 - 16 mm.

6 - 16 mm.

15 mm.

15 mm.

20 mm.

20 mm

25 mm.

25 mm.

30 mm.

30 mm.

40 mm.

50 mm.

UNIT

1.000

1.000

500

500

500

500

250

250

250

125

AL/2 Barra Armor For Horizontal Separation

AL/2 Barra 25

AL/2 Barra 30

TYPE

Prefabricated corrugated separator.

COATINGO STICK

2,0 mm.

2,0 mm.

25 mm.

30 mm.

UNITS

100

100

Zick-Zack Armor For Horizontal Separation

ZICK-ZACK 25

ZICK-ZACK 30

TYPE


COATINGO STICK

2,0 mm.

2,0 mm.

25 mm.

30 mm.

UNITS

100

100

Separador Vigueta Armor For Horizontal Separation

Vigueta 20 mm.

Vigueta 15 mm.

TYPE


COATINGO STICK

2,0 mm.

2,0 mm.

20 mm.

15 mm.

UNITS

Consult

Consult

Armor For Vertical SeparationArmor For Horizontal Separation

Based Concrete StrippersSpacers For Formwork And Accessories

Profile For Making ChamfersStrippers For Large Precast

Safety And Security


ABS con alambre Based Concrete Strippers

ABS 25 al

ABS 30 al

ABS 40 al

ABS 50 al

TYPE

Spacer to concrete base, with wire rods for fixing corrugated steel Max. 28 mm.

COATINGO STICK

To 20 mm.

To 22 mm.

To 25 mm.

To 28 mm.

25 mm.

30 mm.

40 mm.

50 mm.

UNITS

1.000

500

500

250

ABS sin alambre Based Concrete Strippers

ABS 20

ABS 25

ABS 30

ABS 40

ABS 50

ABS 60

TYPE

Spacer made of concrete, without wire, for fixing corrugated steel bars of diameter 28 mm max.

COATINGO STICK

To 20 mm

To 20 mm.

To 22 mm.

To 25 mm.

To 28 mm

To 28 mm

20 mm.

25 mm.

30 mm.

40 mm.

50 mm.

60 mm.

UNITS

1.000

1.000

500

500

250

250

RSR 22/26

RSR 20/24

TYPE

Plastic tube grommets for formwork, knurled surface for perfect grip with the concrete mass. Order tube of 2 m long and 20 mm of diameter. (20/24) and 22 mm. (22/26).

LONGITUD

2,0 m.

2,0 m.

UNITS

100

50

RSR TUBO Spacers For Formwork And Accessories

RK ROSETA 22

TYPE

Terminal slotted plastic insert in RSR TUBE 22/26 grommets for formwork. Use RST sealed.

RSR TUBO

22/26

UNITS

250

SK ROSETA Spacers For Formwork And Accessories

RST TAPÓN ESTANCO 22

RST TAPÓN ESTANCO 30

TYPE

Plastic Terminal grommets for formwork, knurled surface for perfect grip with the concrete mass. Order tube of 2 m long and 20 mm of diameter (20/24) and 22 mm (22/26).

ROSETA

Para RK Roseta 22

Para RK Roseta 30

UNITS

500

500

RST TAPÓN ESTANCO Spacers For Formwork And Accessories

ST TAPÓN 20

ST TAPÓN 22

TYPE

Plastic plug insertable in RSR TUBE 20/24 and 22/26 grommets for formwork. After stripping and curing concrete, remove and insert SK CONE ST PLUG.

RSR TUBO

20/24

22/26

UNITS

1.000

1.000

ST TAPÓN Spacers For Formwork And Accessories

Spacers For Formwork And Accessories

SK CONO 20

SK CONO 22

TYPE

Cone plastic insertable TUBE RSR 20/24 and 22/26 grommets for formwork. Easily removable and reusable.

RSR TUBO

20/24

22/26

UNITS

500

500

SK CONO Spacers For Formwork And Accessories

53




Safety And Security


Strippers For Large Precast

STAPELPLATT

TYPE

Plate with solid plastic hemispheres of high compressive strength, ideal for stacking, storing and transporting precast concrete. Avoid direct contact between precast. It is reusable.

MEASURES

150 X 60

UNITS

200

STAPELPLATT Strippers For Large Precast

Separador Tapón de Seguridad Safety And Security

Tapón de Seguridad 8-16



TYPE

Plastic plug insertable into steel bars and waiting, minimizing the risk of accidents by operators, cuts, etc. Presented as a risk area in orange for easy identification. It is reusable.

8 - 16 mm.

16- 32 mm.

6 - 20 mm.

UNITS

500

O STICK

Safety And Security

Cápsula Soporte Quitamiedo

TYPE

High-strength plastic capsule that serves as support for embedding security fences obras etc.

40 mm.

UNITS

Separador Soporte Quitamiedos Safety And Security

MEASURES HEIGHT

130 mm. 100

54




Safety And Security

Profile For Making Chamfers

Perfil 15

Perfil 20

Perfil 30

TYPE

plastic Linstón triangular section, for conducting structures ormigón chamfers. Is flexible, impact resistant and reusable.

MEASURES

15a/21,2b

20a/28,3b

30a/42,ab

UNITS

100

100

50

Berenjeno o Perfil Triangular Profile For Making Chamfers

LOG.

2,5 m.

2,5 m.

2,5 m.

55

Techmo Limp S Cleaning

Liquid


Bottle of 25 l.

A spot cleaner inorganic, for removing dirt, remains of mortar, remove esflorecencias, debris and limescale, etc.

CONSUMPTION

Según uso

Techmo Limpoleo Cleaning

Liquid


Bottle of 5 l.

Paste cleaner to remove oil stains, grease, wax, etc. in a thickness up to 2 cm deep in marble, terrazzo, concrete, mortar, wood, plaster, natural and artificial stone, etc.

CONSUMPTION

According use

Techmo Limp Multinox Quitagrasas Cleaning

Liquid



Cleaning fluid fats and oils for cars, trucks, engines, machinery.

CONSUMPTION

According use

HygieneTechmo Papel Secamanos Industrial Hygiene

White

COLOR PRESENTATION

Roll 450 m.

Paper 2 ply, 100% cellulose.

Techmo Limp Epox Cleaning

Liquid


Bottle of 25 l.

Cleaner epoxy scrap metal on ceramic tiles.

CONSUMPTION

According use

Techmo Limp Desengrasante Cleaning

Liquid



Cleaning fluid fats and oils for cars, trucks, engines, machinery.

CONSUMPTION

According use

CleaningHygiene And Cleaning

Techmo Soporte Bobina de Pie (Trípode) HygieneSupport for placing paper rolls.

Techmo Soporte Bobina de Pared (Mural) HygieneSupport for placing paper rolls.

Techmo Jabón Crema Desengrasante para Manos Hygiene

White

COLOR PRESENTATION

Bote 10 kg.

Paper 2 ply, 100% cellulose.

Hygiene

CleaningTechmo Limp A Cleaning

Liquid


Bottle of 25 l.

It's a cleaner inorganic nature spots, rust removal for cleaning mortar and concrete debris. Cleaning concrete vats and mixers, etc.

CONSUMPTION

Según uso

Techmo Limpiagres Cleaning

Liquid


Bottle of 25 l.

Special cleaning product for ceramic tile adhesive remains, cement, grout, lime, salt, gypsum etc.

CONSUMPTION

According use

Techmo Limp Clean Cleaning

Towel Box of 80 Ut.

Hand cleaning towels.


Techmo Sepiolita Cleaning

PRESENTATION

Bags of 20 kg.

An industrial absorbent natural, manufactured from sepiolite clay mineral.

CONSUMPTION

According use

VERSION 4.0

Gran Canaria c/ Las Mimosas, Fase 1, Nave 35A - 35B. Polígono Industrial de Arinaga. 35118 Agüimes - Gran Canaria. Tlf.: 928 189 355/56 - Fax: 928 188 041 - [email protected] c/ Benjamin Franklin, Nave 9. Polígono Industrial El Chorrillo. 38109 Santa Cruz de Tenerife - Tenerife. Tlf.: 922 537 672 - Fax: 922 625 807 - [email protected]

Fuerteventura c/ El Trillo, Parcela 14, Nave 34. Polígono Industrial El Matorral. 35610 El Matorral - Puerto del Rosario. Tlf.: 928 543 412 - Fax: 928 543 481 - [email protected]

Barcelona Avinguda Arrahona, 58 nave A-7. Polígono Industrial Can Salvatella. Barbera del Vallès - 08210 (Barcelona). Tlf.: 930 002 900 - Fax: 931 000 643 - [email protected] c/Mar del Tirreno, 13. Industrial San Fernando Norte. Polígono de San Fernando de Henares. 28830 Madrid. Tlf.: 918 270 123 - Fax: 911 018 152 - [email protected]

Total SolutionsFor Construction

Documents

Paginas02-13 - TECHMO, Construction Products · - System autoanclables sheets to concrete Prepufe System - Vapor barriers. - Paint asphalt, rubber asphalt paints. - Prints draining