Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
www.ponovo.com.cn
PONOVO POWER CO., LTD.
www.ponovo.com.cn
Specifications:
Model PADS1061
PONOVO POWER CO., LTD.
No.139 Jinghai Third Road, BDA, Beijing, China. 100176Tel : +86 (10) 95089666Fax : +86 (10) 59089999 www.ponovo.com.cn
Power
Operation Mode
PADS Programmable AC/DC Power Supply PADS Programmable AC/DC Power Supply
60KW
AC; DC; AC+DC
Input
Voltage
Frequency
Single phase:220V or 3 phase: 380V
50Hz or 60Hz
Output
AC Output Voltage L-N: 0~400 V
3-phase independent adjustable
Step size: 0.1V
Phase adjustment: 0~360°
DC Output Voltage 0 - 424V
0 - 1000V
Voltage ripple coefficient : ≤ ±1 %
Frequency
Frequency Output Accuracy
Voltage Distortion (THD)
Power Supply Regulation Rate
Load Regulation Rate
Overload Capability
0� 100Hz, step size: 0.0 1 H z
< 0.01Hz
< 1% (linear load)
< 1%
< 1% (linear load)
110%In: 1 minute
120%In: 30s
200%ln: short-time overload for 2s
www.ponovo.com.cn www.ponovo.com.cn
Making your work easy is our work!
Application
The energy feedback type programmable AC/DC power source with energy feedback
unit equipped functions of voltage adjustable, frequency adjustable, harmonic
controllable, low voltage ride through simulation etc.
The product is ideal tools for research and development of photovoltaic/storage
inverters, converters, rectifiers, DC power supplies, DC-DC converters, UPS/EPS,
motor/generators, power transformers, chargers/piles, batteries, electronic products,
etc. It can� be used in the production commissioning, factory inspection, laboratory
electrical characteristics testing, authoritative organization identification testing and
other fields.
PADS Programmable AC/DC Power Supply
ProgrammableAC/DC Source
Connection Cable
EVSE Connection Cable DC Load/EV
PADS Programmable AC/DC Power Supply
On-board Inverter Auto-test with feedback function
Programmable AC/DC source can provide 400~1000V high voltage to test EV on-board DC-DC, at this moment active DC load simulates the DC power consumer of the EV eg. DC motor. The power can be feedback to grid to reduce the active power loss.
NI PXI System
Programmable AC/DC Power Supply
On-board Charger
Active DC Load
Function
The power supply output is controlled by the host computer software, and the software can run on Windows XP
and Win7. By adjusting the amplitude and phase of the output voltage, voltage disturbance, frequency
disturbance, harmonic disturbance, three-phase unbalanced disturbance, fluctuation and flicker disturbance
performance can be tested.
LCD Display
Indicator
Input Switch
Output Switch
Emergency Stop
Run/Stop
EV Tester Connection Cable
EV AC Charging Function-- Interoperability Auto-test
The purpose of Interoperability test: check the different mode, version of EVSE and EV to realize charging interconnect ability via information exchange and process control.
Control HMI
Industrial PC
Serial Server Digital Multi-meter Power Meter Oscilloscope
Signal Switch
Data Sampling Card
AC Charging Simulator
EVSE Test
Interface
Programmable AC/DC Power Supply
Connection CableOnboard charger
Connection Cable
Active DC LoadProgrammableAC/DC Source
NI PXI System
pow
er m
eter
ing pow
er metering
With energy feedback function, it can provide 100% rated power recovery
Output frequency 0-100Hz, step size 0.01Hz
Internal waveform synthesizer, can realize any sub-harmonic superposition function (up to 50 harmonics at maximum)
Equipped over-current, over-voltage, over-heat, over-load and short circuit protection etc.
A variety of communication interfaces, including RS485, RS232, and Ethernet ports.
Can be connected by shielded twisted pair cables and network cables, Modbus protocol is available.
Features
Power Grid
22
0V
/38
0V
50
~6
0H
z
Power Feedback
Power Metering Power Metering