Packaging Solutions PARTS BROCHURE VOL. 3 Packaging …otcinnovate.com/otcinnovate/wp-content/uploads/2019/04/Packaging-Solutions-Parts... · facility in Bayville, New Jersey

PARTS BROCHURE VOL. 3.1

Packaging SolutionsPackaging Solutions PARTS BROCHURE VOL. 3

5A Helmly Avenue • Bayville, NJ 08721 • www.olympic-tool.com • 800-275-3153

Solutions for Specialized Folding

5A Helmly AvenueBayville, NJ 08721Toll free: 800-275-3153Fax: 1-732-269-5276E-mail: [email protected]

Onlinewww.olympic-tool.comwww.otcinnovate.com

Director of SalesAndrew McTagueCell: 1-609-276-0552E-mail: [email protected]

PresidentEdmund Cassella1-732-269-5274E-mail: [email protected]

TABLE OF CONTENTS

CONTACT US

Strap Assembly .............................................................. 1Strap Assembly with Dovetail .................................. 1Strap Assembly 85 mm .............................................. 1Cross Beam 30 mm Glue Clamp .............................. 1Knuckle Assembly ........................................................ 1Knuckle Assembly With Handle .............................. 1V Clamp ............................................................................ 1Roller Set.......................................................................... 2Roller Set Spare Parts ...................................................... 2Replacement Bearings ................................................ 2Flat Socket Head .......................................................... 2Tap Screw Cap ............................................................... 2Spring Washer ................................................................ 2Spring ............................................................................... 2Bogie/Tie Rods ............................................................... 3Bogie Kit .......................................................................... 3Conveyer Lever and Bushing ................................... 3Support Rods ................................................................. 4Pin Wrench ...................................................................... 4Ejection Roller For Automated Packer .................... 4Guide “U” Bar .................................................................. 5Brass Tip Screw .............................................................. 5Dugomrulli Drive Sprocket ....................................... 5

Counter Nut .................................................................... 6Dovetail Nut ................................................................... 6Clip ..................................................................................... 6Knurled Steel Screws ................................................... 6Brass Tip Screw .............................................................. 6Steel Handle ................................................................... 6Folder Guides (Swords) .............................................. 7Folder Guide Support Rods ...................................... 7Expert Gluer Flipper .................................................... 8Alpina Back Flipper ...................................................... 8Alpina Flipper................................................................. 8Glue Scrapers ................................................................. 9Square Tubes .................................................................. 9

Olympic Tool Company (OTC) is an alternative solution for your folding gluing replacement parts needs. OTC performance parts are not affiliated with the OEM manufacturers. Instead, we provide custom, affordable, quality solutions that exceed the OEM standards. All parts viewed in our catalogs are made at our state-of-the-art facility in Bayville, New Jersey. Please visit our website at www.otc-innovate.com to find out more about the OTC advantage. Thanks for taking the time to see what OTC can do for you.

Packaging Solutions Parts Brochure Vol. 3.1 published March 2019 by Olympic Tool Company.

www.otcinnovate.com 800-275-3153 800-275-3153 www.olympic-tool.com 9

FOLDER-GLUER PARTS

BRASS GLUE SCRAPERSMade with C36000 brass, this item is an exact match of the OEM for less!

30MM SQUARE TUBES3 mill steel tubing and black oxide coating to prevent rusting.

2mmOEM# 0322 2923 00OTC-5500-2mm

3mmOEM# 0322 2317 00OTC-5500-3mm

4mmOEM# 0322 2847 00OTC-5500-4mm

5mmOEM# 0652 3886 00OTC-5500-5mm

200mmOEM# 0626 2466 00OTC-5800-200mm

300mmOEM# 0626 2467 00OTC-5800-300mm

550mmOEM# 0633 2709 00OTC-5800-550mm

700mmOEM# 0626 1595 00OTC-5800-700mm

1142mm (Cross Piece)OEM# 0629 1536 00OTC-5800-1142mm

Olympic Tool wants to be your supplier!When we started supplying packaging companies with parts for their folder-gluers, we had just a handful of quality-made parts to offer. Only a few years later, we have nearly 70 commonly-used parts that are helping our customers find an economical alternative source for their folding-gluing needs.

Our products are engineered and manufactured with the customer in mind and many of these items are offered at more than 30% savings.

Whether it’s our single body construction on our folding guides (swords) or the ease of removing bearings on our bogies and tie rods, Olympic Tool provides a value that the OEM cannot match.

If you don’t see the part you are looking for in this catalog, please let us know. Chances are, we can add it to our inventory and save you money along the way. We work with all materials: brass, steel, aluminum, delrin and other composites. We proudly manufacture all our products in the U.S.A. with a dedicated, highly-skilled workforce, using the latest technologies in the machining industry.

FOLDER-GLUER PARTS FOLDER-GLUER PARTS

8 www.otcinnovate.com 800-275-3153 800-275-3153 www.olympic-tool.com 1

STRAP ASSEMBLYA universal fit for all folding gluing lines. Made of high quality steel and zinc coated, this part is made to last.

CROSS BEAM 30 MM GLUE CLAMPMade of high quality steel and zinc coated.

KNUCKLE ASSEMBLYFits all folding gluing lines. Knuckles are made of high quality steel and zinc coated.

OEM# 206555 OTC-5030-16

V CLAMPFor positioning rods and supports. Steel V clamps are manufactured for strength and durability!

OEM# 0650202000 OTC-5010-11

STRAP ASSEMBLY 85 MMSame quality and strength as our top-selling smaller strap. Made longer for those hard to reach places.

Compatible withExpert GluersOEM# 011500000GAOTC-5015-ASSY

STRAP ASSEMBLY WITH DOVETAILSame design and strength as the OEM without the high cost!

OEM# 0650 0000 XJ OTC-5010-ASSY

OEM# 0027 0000 BUOTC-5010-85-ASSY

OEM# 89315100 OTC-5011-ASSY

KNUCKLE ASSEMBLY WITH HANDLESame quality as our top selling design with the ease and comfort of an adjustable handle.

OTC-5030-16H

COMPATIBLE WITH EXPERT GLUER FLIPPERMade from 6061 aluminum and then anodized for added protection.

ALPINA BACK FLIPPERQuality constructions made from 6061 aluminum. Considerably lower cost than the OEM.

ALPINA FLIPPERMade from T6 6061 aluminum and modified at the top for added strength.

OEM# 0115481300OTC-5300-EXP

OEM# 03220000AHOTC-5300-ALP

OEM# 0322216100OTC-5400-00


FOLDER-GLUER PARTSFOLDER-GLUER PARTSROLLER SET SPARE PARTS

SWORD SUPPORT RODSuperior strength and coated for added protection.

FOLDING GUIDES (SWORDS)Made from quality steel and nickle-coated, our one-piece construction is twice as strong as the two-piece OEM, for half the price.

OEM# 0652 3328 00OTC-5084-350MM

Left Mini Folding Guide 353mmOEM# 0633 0000 JXOTC-5300-L-353

Right Folding Guide 488mmOEM# 0633 0000 DIOTC-5300-R-488

REPLACEMENT BEARINGSOTC-5090-14-2B

FLAT SOCKET HEAD TAP SCREW CAP

OTC-5090-14-CS

SPRING WASHEROTC-5090-14-SW

SPRINGOTC-5090-14-1S

ROLLER SETMade from ALUMINUM instead of composite and offering removable bearings, this roller set gives the operator superior strength and the ease of changing out worn bearings without removing the roller assembly. THE

ROLLERSET THAT PAYS FORITSELF!

Compatible with Fuego/Mistral/Vision/Expert GluersOEM# 1130.0053.00OTC‐5090‐15‐ASSY

Compatible with Alpina/Master GluersOEM# 1130.0042.00OTC-5090-14-ASSY

Left Folding Guide 768mmOEM# 0633 0000 AIOTC-5300-L-768

Right Folding Guide 768mmOEM# 0633 0000 AHOTC-5300-R-768

Left Folding Guide 670mmOEM# 0633 0000 DJOTC-5300-L-670

Left Folding Guide 688mmOEM# 0626 0000 RQOTC-5300-L-688

Right Folding Guide 688mmOEM# 0626 0000 QAOTC-5300-R-688


FOLDER-GLUER PARTSSCREWS • NUTS • ACCESSORIES

Compatible with Vision Corrugated Lines OEM# 1130.0063.00OTC-5100-L-ASSY

OEM# 1130.0060.00OTC-5100-R-ASSY

OEM# 06270000PVOTC-5090-16-ASSY

Compatible with Alpina/Master/Expert/Mistral GluersOEM# 1130.0054.00OTC-5200-L-ASSY

OEM# 1130.0055.00OTC-5200-R-ASSY

OTC-5100-100

BOGIE/TIE RODSAluminum construction and quick change bearing makes this part not only better but more economical.

CONVEYER LEVER AND BUSHINGQuality construction and coated for lasting protection.

OEM# 0115130500OTC-5200-10

OEM# 0115244700OTC-5200-15

BOGIE/TIE RODSQuality made and built to last, our Bogies and Tie Rods continue to surpass the OEM standards.

BOGIE KITComes with replacement composite wheel and quality bearing.

COUNTER NUTMade of quality knurled steel and zinc coated for added protection.OEM# 1004036100OTC-5020-M8

DOVETAIL NUT FROM DOVETAIL STRAP ASSEMBLYMade from steel and zinc coated.OEM# 1004036100OTC-5020-M8

CLIPOEM# N/AOTC-5010-024

KNURLED STEEL SCREWSMade of alloy steel and zinc coated.

M8 x 16mmOEM# 1002108074OTC-5010-8x16mm

M8x20mmOEM# 1002108076OTC-5010-8x20mm

M8x25mmOEM# 1002108078OTC-5010-8x25mm

M8x30mmOEM# 1002108079OTC-5010-8x30mm

M8x70mmOEM# N/AOTC-5010-8x70mm

BRASS TIP SCREW High quality alloy steel, to prevent damage when tightening. The brass tip protects guide bars from kinks and burrs.

STEEL HANDLE Quality construction and built to last in the toughest applications.

OEM# 1001033800OTC-5060-12x8mm

OEM# N/AOTC-5030-Handle

OEM# 06270000PWOTC-5250-ASSY


FOLDER-GLUER PARTSFOLDER-GLUER PARTS

OEM # 00550000JI OTC-5080-L300

OEM # 00270000BP OTC-5080-L180-ASSY

OEM # 00600000 P OTC-5080-L550

OEM # 00270000BS OTC-5080-L350-ASSY

SUPPORT ROD L 300 mm


SUPPORT ROD WITH V CLAMP ASSEMBLY L 350 mm

ADDITIONAL SUPPORT ROD WITH V CLAMP ASSEMBLY SIZES AVAILABLE:L 250 mm OEM # 00270000BM OTC-5080-L250-ASSYL 300 mm OEM # 00270000BR OTC-5080-L300-ASSY

EJECTION ROLLER FOR AUTOMATED PACKERMade of steel and polyurethane for an exact match to the OEM at half the cost!

OEM# 628199600OTC-5020-16

PIN WRENCHMade of stainless steel and heat treated for superior strength.

OEM# 105507000 OTC-5000-6MM

SUPPORT RODSAll size support rods made to OEM specs. Black Oxide coating to prevent rust and wear.

SAVE 25%OR MORE

Please call for pricing.Sales: 609-276-0552Office: 732-269-5274



GUIDE-LARGE “U” BAROEM# 03220000SOOTC-5060-LG-ASSY

GUIDE-SMALL “U” BAROEM# 00270000GEOTC-5060-SM-ASSY

OEM# 1001033800OTC-5060-12x8mm

GUIDE “U” BARMade of high quality alloy steel, these guide bars universally fit all folder- gluers.

Tired of the OEM nylon sprocket wearing down? Switch to Olympic Tool’s aluminum version. Twice as strong and more affordable.

DUGOMRULLI DRIVE SPROCKET

Compatible withCarton PackersOTC-5060-14


FOLDER-GLUER PARTSFOLDER-GLUER PARTS

OEM # 00550000JI OTC-5080-L300

OEM # 00270000BP OTC-5080-L180-ASSY

OEM # 00600000 P OTC-5080-L550

OEM # 00270000BS OTC-5080-L350-ASSY




ADDITIONAL SUPPORT ROD WITH V CLAMP ASSEMBLY SIZES AVAILABLE:L 250 mm OEM # 00270000BM OTC-5080-L250-ASSYL 300 mm OEM # 00270000BR OTC-5080-L300-ASSY

EJECTION ROLLER FOR HANDY PACKMade of steel and polyurethane for an exact match to the OEM at half the cost!

OEM# 628199600OTC-5020-16

PIN WRENCHMade of stainless steel and heat treated for superior strength.

OEM# 105507000 OTC-5000-6MM

SUPPORT RODSAll size support rods made to OEM specs. Black Oxide coating to prevent rust and wear.

SAVE 25%OR MORE

Please call for pricing.Sales: 609-276-0552Office: 732-269-5274



GUIDE-LARGE “U” BAROEM# 03220000SOOTC-5060-LG-ASSY

GUIDE-SMALL “U” BAROEM# 00270000GEOTC-5060-SM-ASSY

OEM# 1001033800OTC-5060-12x8mm

GUIDE “U” BARMade of high quality alloy steel, these guide bars universally fit all folder- gluers.

Tired of the OEM nylon sprocket wearing down? Switch to Olympic Tool’s aluminum version. Twice as strong and more affordable.

DUGOMRULLI DRIVE SPROCKET

Compatible withCarton PackersOTC-5060-14


FOLDER-GLUER PARTSSCREWS • NUTS • ACCESSORIES

Compatible with Vision Corrugated Lines OEM# 1130.0063.00OTC-5100-L-ASSY

OEM# 1130.0060.00OTC-5100-R-ASSY

OEM# 06270000PVOTC-5090-16-ASSY

Compatible with Alpina/Master/Expert/Mistral GluersOEM# 1130.0054.00OTC-5200-L-ASSY

OEM# 1130.0055.00OTC-5200-R-ASSY

OTC-5100-100

BOGIE/TIE RODSAluminum construction and quick change bearing makes this part not only better but more economical.

CONVEYER LEVER AND BUSHINGQuality construction and coated for lasting protection.

OEM# 0115130500OTC-5200-10

OEM# 0115244700OTC-5200-15

BOGIE/TIE RODSQuality made and built to last, our Bogies and Tie Rods continue to surpass the OEM standards.

BOGIE KITComes with replacement composite wheel and quality bearing.

COUNTER NUTMade of quality knurled steel and zinc coated for added protection.OEM# 1004036100OTC-5020-M8

DOVETAIL NUT FROM DOVETAIL STRAP ASSEMBLYMade from steel and zinc coated.OEM# 1004036100OTC-5020-M8

CLIPOEM# N/AOTC-5010-024

KNURLED STEEL SCREWSMade of alloy steel and zinc coated.

M8 x 16mmOEM# 1002108074OTC-5010-8x16mm

M8x20mmOEM# 1002108076OTC-5010-8x20mm

M8x25mmOEM# 1002108078OTC-5010-8x25mm

M8x30mmOEM# 1002108079OTC-5010-8x30mm

M8x70mmOEM# N/AOTC-5010-8x70mm


STEEL HANDLE Quality construction and built to last in the toughest applications.

OEM# 1001033800OTC-5060-12x8mm

OEM# N/AOTC-5030-Handle

OEM# 06270000PWOTC-5250-ASSY


FOLDER-GLUER PARTSFOLDER-GLUER PARTSROLLER SET SPARE PARTS

SWORD SUPPORT RODSuperior strength and coated for added protection.

FOLDING GUIDES (SWORDS)Made from quality steel and nickle-coated, our one-piece construction is twice as strong as the two-piece OEM, for half the price.

OEM# 0652 3328 00OTC-5084-350MM

Left Mini Folding Guide 353mmOEM# 0633 0000 JXOTC-5300-L-353

Right Folding Guide 488mmOEM# 0633 0000 DIOTC-5300-R-488

REPLACEMENT BEARINGSOTC-5090-14-2B

FLAT SOCKET HEAD TAP SCREW CAP

OTC-5090-14-CS

SPRING WASHEROTC-5090-14-SW

SPRINGOTC-5090-14-1S

ROLLER SETMade from ALUMINUM instead of composite and offering removable bearings, this roller set gives the operator superior strength and the ease of changing out worn bearings without removing the roller assembly. THE

ROLLERSET THAT PAYS FORITSELF!

Compatible with Fuego/Mistral/Vision/Expert GluersOEM# 1130.0053.00OTC‐5090‐15‐ASSY

Compatible with Alpina/Master GluersOEM# 1130.0042.00OTC-5090-14-ASSY

Left Folding Guide 768mmOEM# 0633 0000 AIOTC-5300-L-768

Right Folding Guide 768mmOEM# 0633 0000 AHOTC-5300-R-768

Left Folding Guide 670mmOEM# 0633 0000 DJOTC-5300-L-670

Left Folding Guide 688mmOEM# 0626 0000 RQOTC-5300-L-688

Right Folding Guide 688mmOEM# 0626 0000 QAOTC-5300-R-688

FOLDER-GLUER PARTS FOLDER-GLUER PARTS


STRAP ASSEMBLYA universal fit for all folding gluing lines. Made of high quality steel and zinc coated, this part is made to last.

CROSS BEAM 30 MM GLUE CLAMPMade of high quality steel and zinc coated.

KNUCKLE ASSEMBLYFits all folding gluing lines. Knuckles are made of high quality steel and zinc coated.

OEM# 206555 OTC-5030-16

V CLAMPFor positioning rods and supports. Steel V clamps are manufactured for strength and durability!

OEM# 0650202000 OTC-5010-11

STRAP ASSEMBLY 85 MMSame quality and strength as our top-selling smaller strap. Made longer for those hard to reach places.

Compatible withExpert GluersOEM# 011500000GAOTC-5015-ASSY

STRAP ASSEMBLY WITH DOVETAILSame design and strength as the OEM without the high cost!

OEM# 0650 0000 XJ OTC-5010-ASSY

OEM# 0027 0000 BUOTC-5010-85-ASSY

OEM# 89315100 OTC-5011-ASSY

KNUCKLE ASSEMBLY WITH HANDLESame quality as our top selling design with the ease and comfort of an adjustable handle.

OTC-5030-16H

COMPATIBLE WITH EXPERT GLUER FLIPPERMade from 6061 aluminum and then anodized for added protection.

ALPINA BACK FLIPPERQuality constructions made from 6061 aluminum. Considerably lower cost than the OEM.

ALPINA FLIPPERMade from T6 6061 aluminum and modified at the top for added strength.

OEM# 0115481300OTC-5300-EXP

OEM# 03220000AHOTC-5300-ALP

OEM# 0322216100OTC-5400-00

Solutions for Specialized Folding

5A Helmly AvenueBayville, NJ 08721Toll free: 800-275-3153Fax: 1-732-269-5276E-mail: [email protected]

Onlinewww.olympic-tool.comwww.otcinnovate.com

Director of SalesAndrew McTagueCell: 1-609-276-0552E-mail: [email protected]

PresidentEdmund Cassella1-732-269-5274E-mail: [email protected]

TABLE OF CONTENTS

CONTACT US

Strap Assembly .............................................................. 1Strap Assembly with Dovetail .................................. 1Strap Assembly 85 mm .............................................. 1Cross Beam 30 mm Glue Clamp .............................. 1Knuckle Assembly ........................................................ 1Knuckle Assembly With Handle .............................. 1V Clamp ............................................................................ 1Roller Set.......................................................................... 2Roller Set Spare Parts ...................................................... 2Replacement Bearings ................................................ 2Flat Socket Head .......................................................... 2Tap Screw Cap ............................................................... 2Spring Washer ................................................................ 2Spring ............................................................................... 2Bogie/Tie Rods ............................................................... 3Bogie Kit .......................................................................... 3Conveyer Lever and Bushing ................................... 3Support Rods ................................................................. 4Pin Wrench ...................................................................... 4Ejection Roller For Handy Pack .................................. 4

Guide “U” Bar .................................................................. 5Brass Tip Screw .............................................................. 5Dugomrulli Drive Sprocket ....................................... 5Counter Nut .................................................................... 6Dovetail Nut ................................................................... 6Clip ..................................................................................... 6Knurled Steel Screws ................................................... 6Brass Tip Screw .............................................................. 6Steel Handle ................................................................... 6Folder Guides (Swords) .............................................. 7Folder Guide Support Rods ...................................... 7Expert Gluer Flipper .................................................... 8Alpina Back Flipper ...................................................... 8Alpina Flipper................................................................. 8Glue Scrapers ................................................................. 9Square Tubes .................................................................. 9

Packaging Solutions Parts Brochure Vol. 3.1 published March 2019 by Olympic Tool Company.

www.otcinnovate.com 800-275-3153 800-275-3153 www.olympic-tool.com 9

FOLDER-GLUER PARTS

BRASS GLUE SCRAPERSMade with C36000 brass, this item is an exact match of the OEM for less!

30MM SQUARE TUBES3 mill steel tubing and black oxide coating to prevent rusting.

2mmOEM# 0322 2923 00OTC-5500-2mm

3mmOEM# 0322 2317 00OTC-5500-3mm

4mmOEM# 0322 2847 00OTC-5500-4mm

5mmOEM# 0652 3886 00OTC-5500-5mm

200mmOEM# 0626 2466 00OTC-5800-200mm

300mmOEM# 0626 2467 00OTC-5800-300mm

550mmOEM# 0633 2709 00OTC-5800-550mm

700mmOEM# 0626 1595 00OTC-5800-700mm

1142mm (Cross Piece)OEM# 0629 1536 00OTC-5800-1142mm

Olympic Tool wants to be your supplier!When we started supplying packaging companies with parts for their folder-gluers, we had just a handful of quality-made parts to offer. Only a few years later, we have nearly 70 commonly-used parts that are helping our customers find an economical alternative source for their folding-gluing needs.

Our products are engineered and manufactured with the customer in mind and many of these items are offered at more than 30% savings.

Whether it’s our single body construction on our folding guides (swords) or the ease of removing bearings on our bogies and tie rods, Olympic Tool provides a value that the OEM cannot match.

If you don’t see the part you are looking for in this catalog, please let us know. Chances are, we can add it to our inventory and save you money along the way. We work with all materials: brass, steel, aluminum, delrin and other composites. We proudly manufacture all our products in the U.S.A. with a dedicated, highly-skilled workforce, using the latest technologies in the machining industry.

PARTS BROCHURE VOL. 3.1

Packaging SolutionsPackaging Solutions PARTS BROCHURE VOL. 3.1

5A Helmly Avenue • Bayville, NJ 08721 • www.olympic-tool.com • 800-275-3153

Documents

Packaging Solutions PARTS BROCHURE VOL. 3 Packaging …otcinnovate.com/otcinnovate/wp-content/uploads/2019/04/Packaging-Solutions-Parts... · facility in Bayville, New Jersey