Developed for TransportPaceblade MDT-860: Vehicle Cradle Connectors NFC Front Display

• Magnetic mounting mechanism• Locking the tablet to the cradle via4 screws or the Kensington key lock• Includes 1.5m long cable harnesswith various connectors

• RJ-45 Ethernet connector (optional)• Video trigger input• Possibility of various RS-232 connections• All processed in a wiring harness that canbe concealed behind the dashboard

• NFC RFID for reading Mifare /

• Reader on the front of thedevice, next to screen

www.eutronix.nlwww.eutronix.nl

High speed USB

Lorem ipsum

Breda International Airport Phone + 31 (0)76 52 45 330

Bredasebaan 14 E-mail: info@eutronix.nl

4744 RZ Bosschenhoofd Website: www.eutronix.nl

The Netherlands

BR-PACEBLADE-860-BD-EN-AA001Copyright © 2021 Eutronix. All rights reserved.

Branded By:Eutronix B.V

Sensors G-sensor, Light sensor, GyroscopeGPS High sensitivity receiver, 64 channels | GNSS, Glonass, GalileoAntenna InternalSIM/SAM Slot 1 SIM slotExpansion Slot Micro SD card up to 128GBBattery Capacity 6300mAh

Dimensions (W x H x D) 230 mm x 169 mm x 33 mmButtons Power button, 5 programmable buttonsColor BlackBattery Li-Polymer Battery

Physical Characteristics

Voice Support Yes

WWAN Radio GSM: 900/1800Mhz 4G: B1, B3, B5, B7, B8, B20WLAN RadioWPAN Radio

Communication Options

CPU MTK platform 2.0GHz octa coreOS Android 9.0MemoryInterface RJ-45 Ethernet connector (optional) , Audio/in out connector (optional), USB C connector | USB2.0 and

power charging, video trigger input (Yellow-Black Wires) & 15-PIN pogo connector

Performance Characteristics

Touch 8” Colour TFT touch screen (1280x800, capacitive Touch panel)Display

CameraAnalog video input Default 1x analog camera video inputRFID Front: Integrated NFC / HF RFID (Optional: external RFID Reader)

Data Capture / Transfer

Humidity 85% RH @ 60°C to -10°C

IP-rating IP-67Operating temp -10°C to 60°C Storage temp -20°C to 70°C

Enviromental Characteristics

Standard Accessoires(included in the box)

Vehicle docking cradle, RAM Mount, Mounting screws, RFID testing cardAccessoires

Audio in/out Connector(Optional)

External RFID Reader(Optional)

• Possibility to changethe RJ-45 connector to an

• 0.5m long cable which is attached (�xed) to the microphone port• Audio in/out for connectionto an external speaker

Paceblade MDT-860