OVERVIEW OF ASTEAM TECHNOLOGY

OVERVIEW OF

ASTEAM TECHNOLOGY

Driven For Your Success10th May 2010 Version 4

ABOUT US

• Office located in 50 Chin Swee Road (Thong Chai Building)

• Focused on providing solutions for A. Lock Out / Tag Out Equipment.B. Absorbent and Spill Kit Solutions.C. Anti-Slip Solutions.D. Safety identification SolutionsE. Stainless Steel Cable Ties &

Bandings.F. Adhesive Labeling Solutions.

Driven For Your Success

OUR MISSION & VISION

To provide our customers with competitive creativity & flair and to service each customer to the highest professional level. Putting customer's interest and needs above ours, through ASTEAM’s following guiding principles :

A - Agility (Agile in meeting the dynamic needs of today's customers.)S - Service (Be relentless in our pursuit of superior services quality to our customers.)T - Teamwork (Help make customer successful through our teamwork.)E - Efficiency (To be efficient in execution to create value for our customers.)A - Assurance (Assurance of customer satisfaction in Quality/Products/Services we provide.)M - Mindset (A pro-active mindset & approach to meet our customer needs.)

To be a leader in our field of business and earn our customers' trust and enthusiasm through quality and cost effective safety solutions driven by integrity and teamwork of our people.


LOCKOUT TAGOUT (LOTO) SOLUTIONS


Why the need for LOTO?MOM’s Workplace Safety & Health Act 2006 (Act 7 Part III)

It shall be the duty of the occupier of a factory to establish and implement lock-out procedures relating to the inspection, cleaning, repair or maintenance of any plant, machinery, equipment or electrical installation in the factory

How LOTO works?LOTO is the process of preventing the flow of energy from a power source to

a

piece of equipment and in doing so, prevent it from operating.

This is to protect workers involved in the maintenance and servicing of

equipment from the dangerous effects of hazardous energy



Our product range:Mechanical lockout

Electrical lockout Cable lockout


Universal Lockout

Lockout Padlock

Lockout Hasps

Cable Lockouts

Plug Lockouts

Lockout Stations

Group Lockout Boxes Permit

Holder

Our product range:


Valve Lockout

Danger Tags


What are sorbents?

ABSORBENT AND SPILL KIT SOLUTIONS

General Definition:

Sorbents: products used to adsorb/absorb liquids, including oil, petroleum based fluids, chemicals and water.

Types of Sorbents

Oil Only

Chemical

Industrial/ maintenance

Regulations• Containment: [40 CFR 264.17540 CFR 264.175]]• (a) Container storage areas must have a containment system that is designed

and operated in accordance with par. b of this section.• (b) A containment system must be designed and operated as follows:• The containment system must have sufficient capacity to contain 10% of the

volume of the containers or the volume of the largest container, whichever is greater.

EPA RegulationsEPA Regulations


•Sorbent materials is one option for preventing oil spills from reaching waterways.EPA: [40 CFR 112.7 (c) (1) (vii) [1997]

•EPA requires you to control sources of storm water runoff.EPA: [40 CFR 122.26 (1997)]

•EPA requires transporters to clean up any hazardous waste discharge.EPA: [40 CFR 263.31 (1997)]

• Clean, dry workplace floors.– OSHA: [29 CFR 1910.22(a) (2) (1997)]

• DOT-specified containers and suitable quantities of absorbents

shall be kept available for response to spills.– OHSA: [29 CFR 1910.120(j) (1) (vii) (1997)]

OSHA RegulationsOSHA Regulations



Our Absorbent product range:



Our Spill Kit and pallet product range:



Our Spill Kit and pallet product range:



Our emergency shower product range:



Possible Application areas

• General Industry & ServicesUsed anywhere where fluid leaks are a possibility or where oil and chemicals are stored or dispensed.

- storage areas - around machines - pipes

- near tanks - under trains & trucks - around valves

- under planes - on workbenches - emergency spills

• Marine/Spill/Environmental- control and clean up of oil & chemical spills

- decontamination areas

- emergency response on ships or in harbors


ANTI-SLIP SOLUTIONS

Extracts:

• Kitchen area tiling were already slippery • with only a little water and grease, the friction is close to non existence.• The worker concerned experience a uncontrollable slip and hit her head on the hard tiled floor.• Rushed to the hospital where she drifted in and out of consciousness.• suffered seizures and spend a lengthy period in the hospital’s dependency unit.• There are other slips that had occurred before but never was remedied.• As a result, employer ordered to pay over 36,000 pounds including prosecution fees.


ANTI-SLIP SOLUTIONS

Regulations:• National Floor Safety Institute and ANSIANSI/NFSI B101 Safety Requirements for Slip, Trip and Fall Prevention and Testing method for measuring wet SCOF of common Hard surface materials.

• Standards AustraliaAS/NZ 4586:1999 , Slip resistance classifications of new pedestrians surface materials.

• WorkPlace (health, safety and welfare) Regulations 1992 (UK) States that “ The surface should not have holes or be uneven or slippery, and should be kept free of obstructions and from any article or substance which may cause a person to slip, trip and fall. “


ANTI-SLIP SOLUTIONS

Our product range:

Cushion Grip resilient and coarse resilient

Aqua safe & non-abrasive


ANTI-SLIP SOLUTIONS

Our product range:

Bolt-down plates

Safety grip (Abrasive)

Conformable abrasive

Different grade, width, die cut and color


ANTI-SLIP SOLUTIONS

Our product range:Safety grip (Abrasive)

Glow in the dark

Reflective

Warning and printed


SAFETY IDENTIFICATION SOLUTIONS

Our value proposition:

• High quality products at competitive pricing.

• Locally converted and highly customizable.

• Quick turnaround (1-2 days for samples)

Our product range:

• Photoluminescent IMO signs and tapes

• Marine and Infrastructure pipemarkers

• Signage (Stainless Steel or Acrylic)



Photoluminescent products:• Exceeds luminance requirements specified in DIN 67510 Part 4 (Deutsches Institut für Normung)

Elapsed Time (Minutes)

Luminance Specification(mcd/m2)

Typical Luminance(mcd/m2)

10 20 30

60 2.8 6



Marine & Infrastructure pipemarkers:

Signage:


S/S CABLE TIE, BANDING & TOOL SOLUTIONS

We provide solutions to the various industries:


Oil & GasChemical

Navy/Comm

LTA

Power

Heavy Ind.

Automotive

Aviation

Mining

Signage

Our Solution Offerings



Buckles

Uncoated and coated roller ball tiesLadder Ties

Banding

Tooling solutions

Our Product Range



Our Value Proposition

• High quality products at competitive pricing.

• A leading brand providing local presence through Asteam’s sales & support distributorship coverage in Singapore, Malaysia and Indonesia.

• Global approvals to ensure top notch quality that meetsIndustry requirements.

• Wide range of Stainless Steel Ties & Banding solutions to choose from and suit customers’ every needs.

OTHER OFFERINGS – BLANK & PRE-PRINTED LABELS


OTHER SOLUTIONS

• Thermal Heat Transfer Printer

• Ink Ribbons- RoHs certified- UL certified

• Scanners- Laser scanner- 2D barcode scanner- Linear imaging reader


HOW TO CONTACT US

Asteam Technology Pte Ltd

Tony Goh, DirectorTel: (65) 9633 3221Email: [email protected]

Akeem Khoo, Technical Sales ManagerTel: (65) 9772 6571Email: [email protected]

Website: www.asteamtech.com


mailto:[email protected]

mailto:[email protected]

http://www.asteamtech.com/

Documents

OVERVIEW OF ASTEAM TECHNOLOGY