1 2

As you are aware, corporate principle is a compass indicating a direction for a business, in other words, a summary of the meaning of existence, and

therefore, an essential aspect of corporate management.

In order to provide technology worthy of trust from dental offices and all of our customers, our corporate principles include 1) Facilitate working environment

where our employees can maximize their crafts, 2) Be bold in integrating new systems in the ever developing dental technology field, 3) Sustain the efforts

mentioned in 1)&2). Especially the part indicating our company shall “be bold and challenge new things”, it embodies our strong determination to actively

integrate not only new CAD/CAM systems or furnaces, but technology that are not yet incorporated in Japan.

At times, system errors occur and inflict loss on our company, but by providing detailed feedback to the system developers about the problem, it will then

enrich the system further in the end. We are convinced that our management approach will result in the prosperity of the dental industry at large.

Hence, the corporate principles that our company adopts performs effectively as a compass indicating our corporate direction, allowing our employees to

carry out daily responsibilities without any doubts. Ashikaga Ceramic Laboratories (ACL) will continue to act thoroughly based on our corporate principles.

Our Principles

An extract from “Lab Management Basics for Dental Technicians”

Appeared in “Dental Technician”, May, 2013, Ishiyaku Publications Inc.

Written by, Hiroyuki Munemura

customers are happy to have

serviced. employees are happy to have

worked for.

will not becomplacent

with the presentbut challenges

new goals.

Be a company that

Be a company that Be a company that

Chief Sales Department Sales 2nd SectionJoined 2012

Yamaguchi Yuto

When referring to our products we are trying to

stare at the dental clinic's sight.

Please let me know if there is anything unclear

about new products and technologies.

Dental Prosthetics Department 2nd SectionJoined 2014

Okamoto Yuriko

Dentistry technology is deep and there are

many things to remember, but I will

challenge everything while I am enjoying

and do something that I can proudly

prospective for my future juniors.

Section ManagerDenture Department 1st SectionJoined 1993

Obayashi Hirotaka

I do not forget the feelings of my first

time, I am constantly seeking to

acquire technology and knowledge.

Even though I have been engaged in

dental technology for a long time,

there are many things to learn, so I

will seriously improve my skill.

head office

ACL Hawaii, Inc.

Tokyo Office

DENTAL ACADMY TOKYO

Dental Prosthetics Deparment

General Affairs Department

SymbolWe designed our symbol from the initials of our company name, embodying the image of good partnership and a company worth the trust from dentists. The black base color symbolizes the trust backed by sound management approach and the ceramic blue represents precise technology and sanitary environment.

In recent years, dental care has achieved a

remarkable innovational growth. As dental

technicians, we must adapt to the increasingly

diverse dental treatments, and our role is

becoming increasingly important as well. Our

company is keen on bettering our understanding

by actively participating in national and

international dental shows and seminars, and by

collaborating with group companies abroad, we

have developed a system to communicate the

collected information as quickly as possible with

dental offices. We are also restlessly improving

our quality by actively engaging in QC activities.

Moreover, a company must not only pursue profit

but shall contribute to our society through the

business as well. In order to apply this in practice,

we are proactively participating in blood donation,

cleaning activities, community volunteer work and

in welfare activities. Furthermore, as a green

measure to reduce CO2 emission rate we

proactively engage in providing and

manufacturing prosthesis appliances with global

environmental perspective.

Within a large category of Dental Care, we are

adapting to market trends with strict SSQ

(Speed/Service/Quality) efforts than ever before.

Through the work of dental technology, all of us at

ACL hope to contribute to medical welfare and our

society. We look forward to your continued

patronage and support.

Unitingoftechnologyandscience

Certified Technician, Japanese Society of Oral ImplantologyCertified Technician, International Society of Oral ImplantologyCertified Dental Technician, Nippon Academy of Dental TechnologyCertified Instructor, Japan Dental Technologists AssociationVice Chairman, Gunma Dental Technologists AssociationDirector, Dental Academy, Tokyo

(Approval number: #09BY5004)

Dental TechnologySale of dental material

Hiroyuki Munemura

10 million Yen

December 1989

April, 1984

BusinessContent

CEO

Capital

Incorporated

Founded

CEO & President

Sales Department

Dental Prosthetics Deparment

Sales Department

Dental ProstheticsDeparment

Denture Department

Sales Department

DENTALACADMYTOKYO

HeadOffice

TokyoOffice

SendaiOffice

ACLHawaii,

Inc.

Ed

ucatio

n secto

r

Intern

ation

al Secto

r

1984

1986

1987

1989

1990

1991

1992

1994

1995

1997

1998

2000

2001

2002

2005

2008

2010

2011

2012

2013

2014

2015

2016

4

5

9

12

1

5

3

8

11

11

1

9

2

1

8

3

9

12

5

10

6

4

4

5

7

8

2

5

12

4

6

6

2

4

10

12

9

9

Ashikaga Ceramic Laboratories began operation

Addition of first dental technical lab

Integrated “Dicor System”

Incorporated as a company

Overseas training program established

Integrated “Sunrise System”

Relocated to a new office in Ashikaga city, Tochigi Prefecture, due to business expansion

Integrated “Inkovac System”

Became a joint-stock company

Organized 10th Year Anniversary Academic & Science Seminars

Established Guam branch

15th Year Anniversary Lectures held in Guam

Obtained permit for importing of medical devices

Integrated “Empress 2”

Integrated CAD/CAM system, “Nobel Biocare Procera Piccolo”

Established Hawaii branch in Honolulu. Work transfer from Guam branch

Relocated to a new office in Ota City, Gunma Pref., due to business expansion

Integrated CAD/CAM system, “Nobel Biocare Procera Forte”

Integrated “Multi-injection system”

Established service business department

Integrated CAD/CAM system, “Nobel Biocare Procera Genion”

Began management involvement at Quest Inc. as Tokyo branch

Began management involvement at Master Ceramist School

Integrated CAD/CAM system, “3M Lava Scan ST”

Master Ceramist School 10th Year Anniversary Ceremony

Integrated e-max system

Integrated Aadva GC’s CAD/CAM system

Established Sales office in Sendai City, Miyagi Prefecture

Integrated “COSMOS Denture System”

Integrated CAD/CAM system, “Roland DWX-50”

Integrated “IyoBace Sytem”

Integrated CAD/CAM system, “Roland DWX-4”

Integrated “CA Sytem”

Integrated CAD/CAM system, “Noble Biocare Procera Genion 2”

Integrated CAD/CAM system, “Straumann CARES”

Integrated CAD/CAM system, “Sirona inEos X5 / inLab MC X5”

Integrated CAD/CAM system, “3Shape D2000 / TRIOS”

Integrated CAD/CAM system, “BEGO Varseo 3D Printer”

As of September, 2016

Japanese Society of Oral Implantology

International Society of Oral Implantology

BPS system official laboratory

Nippon Academy of Dental Technology

Japan Dental Technologists Association

Certified Technician

Certified Technician

Certified Technician

Professional dental technician

Certified Instructor

Japan Implant Clinical Study Group

SJCD International

Dental Concept 21

Japan Society of Occlusal Society

The Japanese Society of Dental Aesthetics

Japan Digital Dental Society

Japan Clinical Dentistry CAD / CAM Society

Japan Dental Technical Association Association

Study Group “Kojima kai”

Study Group "Ayumi"

Japan Society of Dental Techniques

Japan Dental Technician Association

3 4

Certification

Affiliation organization & Study Group

Hiroyuki MunemuraCEO & President

5persons

6persons

2persons

1persons

1persons

Dental Prosthetics DeparmentFirst SectionSecond SectionThird SectionCAD/CAM SectionQuality Control Section

Denture DepartmentFirst SectionSecond SectionQuality Control Section

Sales DepartmentSales SectionOffice Work Section

General Affairs DepartmentGeneral Affairs sectionAccounting SectionHuman Resources SectionService Section

Varseo 3D printing system

SintraFurnace for zirconia

Nobel ProceraGenion２

3MLava Scan ST

SIRONAinEos X5 / inLab MC X5

StraumannCARES D7 PLUS

3shapeIntraoral scanner TRIOS

BEGOVarseo 3D Printer

By shooting a color chart with precise color patterns printed together in the patient's oral cavity, we can accurately reproduce the color of the patient's teeth.

Accurately reproducetooth color

GCAadvaMill LD-I / AadvaScanner

Roland DGMilling machine DWX-50 / DWX-4

The most sought after aestheticism by mankind since the past has been to show beautiful teeth. By trial and

error, many of our predecessors attempted to figure out how to naturally fit prosthetics intraorally and

maximize its beauty, so there are various dental material and technology today. In our company, we first

cultivate craftsmen who boldly integrate innovative technology, and by providing feedbacks from the patients,

we incessantly accumulate technological knowledge. In aesthetic dentistry, craftsmanship of dental

technicians and cutting-edge technology that delivers the craft are critical aspects. Please inquire us about

your aspirations.

By milling materials having both superior biocompatibility and strength

such as titanium, alumina and zirconia that are used for frames with

CAD/CAM technology, a level of precise fitting rarely achieved by

human craftsmanship alone is actualized.

Aesthetic Dentistry

BZ Crown

This is a prosthesis made by simple zirconia

designed by CAD and carved out directly from

translucent zirconia block. By adding natural

gradation, we offer a truly natural looking genuine

zirconia made prosthesis.

By designing core frame with the latest CAD/CAM,

our own technicians will apply the porcelain. We are

able to offer material with near identical

translucency as natural tooth. We offer a wide

ranging applications for various purposes including

implants.

Porcelain Build up

The ingot with lithium disilicate as main component

is heated in a specialized furnace and formed.

The ceramic material having 360~400MPa bending

strength will provide excellent durability when

creating individual crowns.

Bui ld-up type Mil l ing typePress type

Zirconia frame

Titanium frame

We have a 10-year warranty on our zirconia frame. If the frame breaks,

please send us the actual item and warranty card. We will guarantee if

you break it within 10 years after using it normally. However, it is not

covered by reprocessing or reshaping or breaking of upper porcelain.

Zirconia frame 10 year warranty

Pressable Ceramic

5 6

Ivoclar VivadentProgramat EP5010 / EP5000

3shapeD2000

Aesthetic Dentistry - Equipment IntroductionCAD/CAM - Equipment Introduction

CAD/CAMACL applies the most up-to-date CAD/CAM system for dentistry and with a dedicated

dental technician assigned specifically for CAD/CAM operation who inspects for even

0.01mm of error, we provide dental prosthesis with the level of precision rarely achieved

by human hands.

Intraoral scanner TRIOS

Looks nearly the same as natural tooth by building porcelain on core frame.

Great cost performance and strength by directly carving out from ingot.

Shaped ceramics by melting, combines aestheticism and strength,

Surgical plate NobelClinician Implementation

Increasingly recognized as a common treatment method, implant treatment research has been

conducted across the globe by various makers, and demand for implant technology is increasing

every year. We offer many services including creating crown from one implant, bridge and also full

dentures as well to accommodate various cases.

Through many years of accumulated experience, we are able to deliver high quality dentures.

ACL integrates various equipment for our services, such as precise fit-resin for best fit, pressure

polymerization system, heat-curing acrylic resin for repair and dental bonding and non-clasp

denture MI system that is gaining attention.

Supports various implant brands

Abutment / Custom abutment / Upper structure

All-On-4

Full mouth frame

High Precision DenturesImplant Technology

By having all of our specialists certified as “Dental Implant

Techn ic ian ” , au thor ized by Japanese Soc ie t y o f Ora l

Implantology and International Society of Oral Implantology, we

offer precise solutions for implant related demands. At Ashikaga

Ceramic Laboratories (ACL), we offer sense of security and

comfort backed by craftsmanship only available by Society

approved technicians.

International Society of Oral Implantology

Japanese Society of Oral Implantology

ActiveDry / FressyDecontamination and disinfection

of dentures

As of September, 2016

LaserStar iWeldFine work by laser welding

We support other than the system described here. Please contact us.Introduction Implant System High precision dentures - Equipment Introduction

All-on-4

Non-clasp DentureEstheShot

Valplast

Lucitone FRS

AttachmentMagnetic attachment

Bar attachment

ERA attachment

OPA attachment

Metal PlateCobalt-chrome

Titanium alloy

Pure titanium

Implant relatedStents

Surgical plate

Radiographic guides

Clear aligners

Various orthodontic appliances

Dental night guards

Dental splints

Trays for bleaching

Drug retainer

Others

IvoBase SystemNew polymerization system

by electronic control

CosmosDenturePolymerization systemby non-opening method

ErkoPress 300TpMolding machine for mouthpiece / tray

CA SystemCA Create a setup model

Authorized BPS System Lab

The BPS dentures created by BPS system is made with an entirely different process. It is created with dental technician present, checking the intraoral condition, movements of cheeks and muscle, bite and pronunciation as well as the balance of a smile. Please inquire us for details as your authorized BPS lab.

We offer “Certified” sense of security Certified technicians: 2 persons

Impression System

7 8

Certified technicians: 5 persons

Certified technicians: 6 persons

IBARAKI

SAITAMA

TOCHIGI

GUNMA

Please contact us from the telephone or the website.

Send the document.We will deliver the pamphlet, price list, instruction sheet and so on. In the case of a nearby dental office, the person in charge will visit directly.

Please send.Please send us instructions, acquired impressions, plaster model, and other necessary items. We will contact you if detailed meetings are necessary.

ProductionWe design and manufacture the optimal dental model for each patient.

ArrivalWe will send the completed dental model. Although we are strictly packing, please confirm that there is no damage etc. promptly after arrival.

Please contact us.

Our passion is to the world.

*Depending on the circumstances of the route, we may not be able to respond to your request.

*For other peripheral areas please contact us.

Koga / Yuki / Chkusei / Tsukuba

Kumagaya / Hanyu / GyodaHonjo

Order Flow Direct Pickup Area

Maebashi / Takasaki / OtaIsesaki / Kiryu / TatebayashiMidori / Shibukawa / NumataTomioka / Kanra

Utsunomiya / Oyama / KanumaAshikaga / Sano / Tochigi

Through the dental clinic, to patients throughout the country,

Based on the Hawaii branch office, we are delivering to the United States, as well as Asia and Europe.

At our company, you can order dental

products by courier.

The dental model that has been sent

is managed well by professional staff

until delivery.

Staf f can visit directly if within the

direct pickup area

possible. Our staff

is qual i f ied as a

dental technician

or a dental hygienist and has many

experiences so we can tell you a bit of

a pointed matter smoothly. Since ACL

has full-time staff

for delivery, more

reliable, safe and

reliable delivery is

possible.

TOKYO

MIYAGI

23 Wards

Sendai / Natori / IwanumaTagajo / Shiogama / KurokawaMiyagi

*Please consult

109

201801

+81-276-20-5670 +81-276-20-5671info@acl-jp.com http://acl-jp.com

Ashikaga Ceramic Laboratory Co., Ltd.672, Higashishimmachi, Ota-shi, Gumma, 373-0015

+81-3-3811-0241 +81-3-3811-0240msc@acl-jp.com http://msc-lab.com

Juzandoh Bld.5F, 2-8-1, Hongo, Bunkyo-ku, Tokyo, 113-0033MSC Co., Ltd.

+81-3-3811-0223 +81-3-3811-0240info@dental-academy.tokyo http://dental-academy.tokyo

Juzandoh Bld.5F, 2-8-1, Hongo, Bunkyo-ku, Tokyo, 113-0033DENTAL ACADEMY TOKYO

ACL Hawaii, INC.1600 Kapiolani Blvd., Suite1227, Honolulu, Hawaii 96814 U.S.A.+1-808-947-2128mail@aclhawaii.com

+1-808-947-2118

+81-284-72-5028

Dental Mart Co., Ltd.3771-2, Nakagawacho, Ashikaga-shi, Tochigi, 326-0825

0120-1372183-10-7, Sumiyoshidaihigashi, Izumi-ku Sendai-shi, Miyagi, 981-3222

Sendai Sales Office

Can not make calls from outside Japan.