ORDERS AND INQUIRIES - autobakeproductions.comautobakeproductions.com/Upload/Products/Belshaw-2012-Product-Guide... · ORDERS AND INQUIRIES Contact your Belshaw Adamatic distributor,

ORDERS AND INQUIRIES

Contact your Belshaw Adamatic distributor, or email [email protected].

PRODUCT INFORMATION www.belshaw.com

BELSHAW ADAMATIC BAKERY GROUP • 814 44TH ST NW, SUITE 103, AUBURN, WA 98001 USA • [email protected]

International

T H E S O U R C E F O R D O N U T P R O D U C T I O N

Nº1

mailto:[email protected]

http://www.belshaw.com



When Placing an Equipment Order...

Thank you ! – the customer service team at Belshaw Adamatic Bakery Group

2 ORDERS AND INQUIRIES: Contact your Belshaw distributor or [email protected] INTERNATIONAL

...Please specify the following!

Item Number1. Model2. Description3. Volts, Hertz, Phase4. Other options5.

Example 2: Item Nbr 212671. Model 718LCG2. Donut Fryer3. 220 Volts, 50/60hz, 1phase4. Liquid Propane option5.

Example 1: Item Nbr 200121. Model HI18F2. Floor Standing Icer3. 240 Volts, 50/60hz, 1phase4. (no other options)5.



3ORDERS AND INQUIRIES: Contact your Belshaw distributor or [email protected] INTERNATIONAL

INDEXINDEX 2012 Product Guide (International models)

Floor Model Fryers (Gas • Electric)

Cake Donut Depositors Type B • F • N

Insider Ventless Shortening Filters

Proofer Glazers Icers

Snack Master Thermoglaze 25 • 50

Donut and Pastry Cutters

Plungers for Type B • F

Type K Depositors Pancake • Donut

616B • Cut-N-Fry Donut Robot®

4-7

20/22

18 24

26 26 27

18 19

28

21 23

8-9 10-17




FLOOR MODEL GAS FRYERS

724CG Donut Fryer with Type F Cake Donut depositor, submerger, and EZMelt options

21268 718LCG Donut Fryer

Screens and submergers – see Accessories

Floor Model Gas FryersThe 700 series gas-heated floor model fryers are designed to efficiently produce high quality donuts. Belshaw Adamatic’s ‘Controlled Combustion’ burner tube technology generates savings throughout the life of the fryer. All fryers easily acco-modate Type B and Type F cake donut depositors, a sub-merger system, and a choice of standard ‘SF’ model or EZ Melt shortening filters.

Electronic ignition (requires 120V/240V power supply)• Specify drain tray on left or right side. If not specified, the • drain tray will be on right.2 nickel plated cake donut frying screens with bolt-on heat • dissipating handlesAdjustable, bolt down legs• Exterior drain valve control• Options: • Submerger, extra screens, screen cradle, kosher package with standing pilot and no voltage required

718LCGFloor Model Gas Fryer, electronic ignition, frying area 17” x 25” (46cm x 66cm), 44,000 BTU, electronic ignition, shortening capacity 94lbs (43kg), holds 24 standard donuts, production approx 65-80 dozen donuts per hour, with drain tray, 2 nickel plated screens w/handles, exterior drain valve control, ETL listed.

Options include: Specify Natural Gas or Liquid Propane (a conversion kit is • required for changeover)Specify voltage as below• Specify drain tray on left or right side. If not specified, the • drain tray will be on rightProofing and frying screens (order separately, listed on • following pages)Submerger (order separately, listed on following pages)• Standing pilot models with no voltage required•

21268 NG, 220V, 50/60hz,1ph

21267 LP, 220V, 50/60hz, 1ph

21269 NG, standing pilot, no electric power required

21270 LP, standing pilot, no electric power required




FLOOR MODEL GAS FRYERS

724CGFloor Model Gas Fryer, electronic ignition, frying area 24” x 24” (61cm x 61cm), 66,000 BTU, electronic ignition, shortening capacity 106bs (48kg), holds 36 standard donuts, production approx 80-100 dozen donuts per hour, with drain tray, 2 nickel plated screens w/handles, exterior drain valve control, ETL listed.

Options include: Specify Natural Gas or Liquid Propane (a conversion kit is required • for changeover)Specify voltage as below• Specify drain tray on left or right side. If not specified, the drain tray • will be on rightProofing and frying screens (order separately, listed on following • page)Submerger (order separately, listed on following page)• Standing pilot models with no voltage required•

21282 LP, 220V, 50/60hz, 1ph

21271 NG, standing pilot, no voltage required

21272 LP, standing pilot, no voltage required

734CGFloor Model Gas Fryer, electronic ignition, frying area 34” x 24” (86cm x 61cm), 89,000 BTU, Capacity 195lbs (88kg), holds 48 standard donuts, production approx 130-150 dozen donuts per hour, with drain tray, 2 nickel plated screens w/handles, exterior drain valve control, ETL listed.

Options include: Specify Natural Gas or Liquid Propane (a conversion kit is required • for changeover)Specify voltage as below• Specify drain tray on left or right side. If not specified, the drain tray • will be on rightProofing and frying screens (order separately, listed on following • pages)Submerger (order separately, listed on following pages)• Standing pilot models with no voltage required•

21278 NG, 220V, 50hz,1ph

21283 LP, 220V, 50hz, 1ph

21274 NG, standing pilot, no voltage required

21275 LP, standing pilot, no voltage required

21282 724CG Donut Fryer

21278 734CG Donut Fryer




Floor Model Electric FryersBelshaw’s floor model electric fryers produce high-quality donuts with low operating costs. The heavy duty elements and other components are designed to give years of service. All fryers easily accomodate accessories such as Type B and Type F depositors, submergers, and a choice of standard ‘SF’ model or EZ Melt shortening filters.

Specify drain tray on left or right side. If not specified, the • drain tray will be on right.Heavy duty elements, tiltable upwards for easy kettle • cleanup2 nickel plated cake donut frying screens with bolt-on • handlesAdjustable, bolt down legs• Exterior drain valve control• Options: Submerger, extra screens, screen cradle•

618LFloor Model Electric Donut Fryer, frying area 17” x 25” (46cm x 66cm), shortening capacity 83 lbs (38kg), holds 24 stan-dard donuts, capacity approx 80-100 dozen per hour, with drain tray, (2) nickel plated screens w/handles, exterior drain valve control, ETL listed.

Options include: Specify voltage, as below• Specify drain tray on left or right side. If not specified, the • drain tray will be on rightProofing and frying screens (order separately, listed on • preceding page)Submerger (order separately from list on preceding page)•

21284 380/415V, 50/60Hz, 3ph

624Floor Model Electric Donut Fryer, frying area 24” x 24” (61cm x 61cm), shortening capacity 97 lbs (44kg), holds 36 standard donuts, capacity approx 65-80 dozen per hour, with drain tray, (2) nickel plated screens w/handles, exterior drain valve control, ETL listed.

Options include: Specify voltage, as below• Specify drain tray on left or right side. If not specified, the • drain tray will be on rightProofing and frying screens (order separately, listed on • preceding page)Submerger (order separately from list on preceding page)•

21257 208/240V, 50/60Hz, 1ph

21259 208/240V, 50/60Hz, 3ph

21285 380/415V, 50/60Hz, 3ph

21259 624 Donut Fryer B0001000 Type B Cake Donut depositor

0405 Column Mount 624-1521 Submerger

21284 618L Donut Fryer

21257 624 Donut Fryer

FLOOR MODEL ELECTRIC FRYERS




ACCESSORIES FOR FLOOR MODEL FRYERS

Screens and Submergers for Floor Model Fryers (Gas and Electric)Frying ScreensScreens with bolt-on handles. These are for cake donuts only. (Two screens are supplied standard with each new floor model fryer).

618L-0007 Frying screen for cake donuts, with bolt-on handles, for 618L/718L fryers, 17" x 25"

624-0007 Frying screen for cake donuts, with bolt-on handles, for 624/724 fryers, 23" x 23"

634-1058 Frying screen for cake donuts, with bolt-on handles, for 734 fryers, 23" x 33"

Proofing and Frying ScreensScreens without handles, so they can be easily placed into a baking rack for proofing donuts. After proofing, the screens are placed in the fryer either with detachable handles, or with a Screen Cradle (see below). 10 or more of these screens are normally needed for yeast raised donut production.

618-0007A Proofing and frying screen for raised donuts, without handles, for 618/618L/718L fryers, 17" x 25"

624-0007A Proofing and frying screen for raised donuts, without handles, for 624/724 fryers, 23" x 23"

634-0013A Proofing and frying screen for raised donuts, without handles, for 734 fryers, 23" x 33"

Screen CradleThe easiest way to raise and lower Proofing and Frying Screens in a donut fryer.

618L-1037 Screen cradle for 618L, 718L fryers, 17" x 25"

624-1037 Screen cradle for 624, 724 fryers, 23" x 23"

634-1037 Screen cradle for 734 fryers, 23" x 33"

Detachable Screen HandlesUse to pick up Proofing And Frying Screens

616-0007C (1) Detachable handle for Belshaw proofing and frying screens. Two handles are required for each screen.

SubmergersUsed when frying ball shaped donuts, any other ball shaped products, such as Loukoumades or Hushpuppies, or any product that can be submerged without affecting quality. Important: for fryers purchased before March 2011, different kits are needed (contact Parts Dept)

618L-1521 Submerger for 618L fryer

624-1521 Submerger for 624 fryer

718LG-1541 Submerger for 718LG fryer

724G-1547 Submerger for 724G fryer

734G-1536 Submerger for 734G fryer

624-0007 Frying Screen

624-0007A Proofing / Frying screen

624-1037 Screen Cradle , shown alone (above) and with screen (below)

616-0007C Detachable screen handles (2)

624-1521 Submerger (shown with 624 fryer)




TABLETOP FRYERS • 616B • CUT-N-FRY

8848014 616B Donut Fryer with cake donuts

8848015 616B Donut Fryer with raised donuts

Cut-N-Fry (616B fryer with Type N depositor and mounting system)

616B Fryer • Cut-N-Fry for DonutsBelshaw’s 616B is a 16” x 16” donut fryer that occupies under 3 square feet (1 sq. m) of counter space and weighs only 44lbs. (20kg) empty. At a maximum capacity of 16 average size donuts and approx. 35 dozen/hour, it offers the best possible use of space for the amount that it produces. The 616B can be used for cake or yeast raised donuts. (10 or more screens are normally used for yeast-raised donuts)

The “Cut-N-Fry” is a 616B fryer combined with a Type N depositor, with kits for Donut, Hushpuppy and Loukoumades production.Fryer cover doubles as a drain tray which can be placed on left or right side as needed (no need to specify)• 2 nickel plated cake donut frying screens with bolt-on heat • dissipating handles suppliedNo drain. Filter-Flo Siphon can be used to drain and filter shortening. • Fryer kettle is removable. • Options: Submerger, extra screens•

616B Fryer16” x 16” fryer, holds 16 standard donuts, suitable for cake or raised donuts, with 2 frying screens with handles, drain tray/cover, holds 55 lbs shortening, production rate approximately 35 dozen/hour, NSF-4 listed.

Options include: Specify voltage as below• Proofing and frying screens (order separately, listed on fol-• lowing page)Submerger (order separately, listed on following page)•

8848014 240V, 50/60Hz, 1ph (CE model)

8848015 240V, 50/60Hz,1ph

8848016 208V, 50/60Hz,1ph

Cut-N-Fry PackageThis can be used as the base model for Cut-N-Fry for Donuts, Hushpuppies and Loukoumades. Package includes:

616B Fryer model • 8848014 above Type N Depositor • N20000 (see Cake Donut Depositors sec-tion of this book)Short arm mounting kit • N-1033 (see Cake Donut Depositors)Package does not include plunger or cylinder, • must order separately. (See next page)

(The Cut-N-Fry can also be ordered with 616B, Type N and Mounting Kit separately)

26019 Cut-N-Fry Package

Cut-N-Fry (for Donuts)Cut-N-Fry for donuts includes the items below. Order the fol-lowing items separately.

Cut-N-Fry Package • 26019 OR Cut-N-Fry with components ordered separatelyAny size Type N plain plunger (1-3/4” is typical.) See Cake • Donut depositors section, Type N plungers Type N cylinder (same size as plunger). See Cake Donut • depositors section




616B • CUT-N-FRY • ACCESSORIES

Cut-N-Fry for HushpuppiesCut-N-Fry for Hushpuppies includes a Cut-N-Fry package, plus a ‘Hushpuppy Kit’ which consists of:

2” Hushpuppy Plunger (N-1009BSS-103DB), deposits 3 at a time• 2” Cylinder for Type N• HP-1004 Submerger screen for 616B fryer•

26021 Hushpuppy Kit for Cut-N-Fry

Cut-N-Fry for LoukoumadesCut-N-Fry for Hushpuppies includes a Cut-N-Fry package, plus a ‘Loukou-mades Kit’ which consists of:

2” Loukoumades Plunger (N-1009BSS-103C), deposits 3 at a time• 2” Cylinder for Type N• HP-1004 Submerger screen for 616B fryer•

26020 Loukoumades Kit for Cut-N-Fry

Screens, Submerger and Filter for 616B/Cut-N-Fry

Frying Screens

Screens with bolt-on handles. For cake donuts. 2 screens are supplied stan-dard with each new 616B fryer. (Can also be used for yeast raised donuts, if the handle will fit into your proofer)

616-0512 (1) Frying screen with bolt-on handles, 15” x 15”

Proofing and Frying ScreensScreens without handles, so they can be easily placed into a baking rack for proofing donuts. After proofing, the screens are placed in the fryer with detach-able handles (see below).

616-0007 (1) Proofing and Frying Screen (no handles), 15” x 15”

Filtration

DR42-1048 Filter Flo Siphon (removes and cleans shortening)

DR42-0277DZ Cloth filter cones for Filter Flo, per dozen

Detachable Handles for Proofing and Frying Screens

616-0007C (1 only) Detachable handle for Proofing / Frying Screens

SubmergerThis is a frying screen with spacers to hold it just below the surface of short-ening. Used when frying ball shaped donuts, other round products, or any product that can be submerged without affecting quality.

HP-1004 Submerger screen, upper

Cut-N-Fry for Loukoumades/Hushpuppies

616-0512 Frying Screen

616-0007 Proofing and frying screen

DR42-1048 Filter-Flo Siphon

616-0007C (2) Detachable screen handles

HP-1004 Submerger Screen




Belshaw Adamatic’s Donut Robot® machines deposit, fry, turn, and dispense donuts automatically. Com-pared to traditional frying, donuts are improved while labor is reduced. Training is easy and high quality, repeatable donuts are produced time after time. Both cake and yeast raised donuts can be made on Donut Robot Mark 2 and above; GP models are for mini donuts only.

Donut Robot® Mark 1Automatic fryer with depositor, for standard size cake donuts, with 1-9/16” plunger and hopper, automatic conveyor, 3-3/4” flight bar spac-ing, temperature adjustment dial and 4-speed gear selection, no drain, capacity approx 13 doz/Hr, ETL listed

Options: • Voltage, Plunger type as belowAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon. See Donut Robot accessories sectionCan be used for mini donuts with accessory mini donut hopper and • plunger MK-1502-1 (see Donut Robot accessories).

21604 208/240V/50/1, Plain plunger (CE model)

21606 208/240V/50/1, Star plunger (CE model)

Donut Robot® Mark 1GPAutomatic fryer with depositor, for mini donuts, 1” double plunger and hopper, automatic conveyor, 2-1/4” flight bar spacing, temperature adjustment dial and 4-speed gear selection, capacity approx 74 doz/hr, ETL listed

Options: • Voltage as belowAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon. (See Donut Robot accessories section)Cannot be converted for standard size donuts•

22305 208/240V,50/60hz,1ph, (CE model)

Donut Robot® Mark 2 Automatic fryer with depositor, for standard size cake donuts, 1-9/16” plunger and hopper, automatic conveyor, 3-3/4” flight bar spacing, tem-perature adjustment dial, speed adjustment dial, drain, capacity approx 37 doz/hr., ETL listed

Options: • Voltage, Plunger type as belowAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon, Drain Valve, EZMelt18. See Donut Robot accessories sectionCan be used for mini donuts with accessory mini donut hopper and • plunger MK-1502-1 (see Donut Robot accessories)Using the supplied drain requires Drain Valve accessory. (EZMelt • requires drain valve, Filter Flo does not)Can be used for yeast raised donuts with Feed Table, Trays and • Cloths, (see Donut Robot accessories)

21618 208/240V/50/1, Plain plunger, CE

22126 208/240V/50/1, Star plunger, CE

21611 240V/50/1, Star plunger, Australia/NZ


21582 380/415V/50/3, Star plunger, CE

21604 Mark 1

22305 Mark 1 GP

21618 Mark 2 (shown with Roto-Cooler accessory)

Other voltages available – contact Belshaw!

DONUT ROBOT® AUTOMATIC FRYERS




Donut Robot® Mark 2 GPAutomatic fryer with depositor, for mini donuts, with 1” double plunger and hopper, automatic conveyor, 3” flight bar spacing, temperature adjustment dial, speed adjustment dial, drain, capacity approx 152 doz/hr, ETL listed

Options:• Voltage as belowAccessories:• Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon, Drain Valve, EZMelt18. See Donut Robot accessories sectionCannot be converted for standard size donuts• Using the supplied drain requires Drain Valve accessory. (EZMelt • requires drain valve, Filter Flo does not)

21998 208/240V/50/1, CE

22417 240V/50/1, Australia/NZ

22016 208/240V/50/3, CE

21635 380/415V/50/3, CE

Donut Robot® Mark 2 Gas Automatic fryer with depositor, for standard size cake donuts, with 1-9/16” plunger and hopper, automatic conveyor, 3-3/4” flight bar spacing, temperature adjustment dial, speed adjustment dial, no drain, 120V power required, capacity approx 37 doz/hr

Options: • Natural Gas(NG)/Propane(LP), Plunger type, VoltsAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon. See Donut Robot accessories sectionCan be used for mini donuts with accessory mini donut hopper • and plunger MK-1502-1 (see Donut Robot accessories)Can be used for yeast raised donuts with Feed Table, Trays and • Cloths, (see Donut Robot accessories)Not CE-listed, or otherwise certified•

22502 120V,50/60hz,1ph, Star plunger, NG

22504 120V,50/60hz,1ph, Plain plunger, LP

22510 208/240V,50/60hz,1ph, Plain plunger, NG

22513 208/240V,50/60hz,1ph, Plain plunger, LP

22512 208/240V,50/60hz,1ph, Star plunger, NG

22506 208/240V,50/60hz,1ph, Star plunger, LP

Donut Robot® Mark 2GP GasAutomatic fryer with depositor, for mini donuts, with 1” double plunger and hopper, automatic conveyor, 3” flight bar spacing, tem-perature adjustment dial, speed adjustment dial, no drain, capacity approx 152 doz/hr

Options:• Natural Gas(NG)/Propane(LP), Plunger type, VoltsAccessories:• Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon. See Donut Robot accessories sectionCannot be converted for standard size donuts• Not certified•

22511 120V,50/60hz,1ph, NG

22503 120V,50/60hz,1ph, LP

22507 208/240V,50/60hz,1ph, LP

21998 Mark 2GP

22502 Mark 2 Gas

22511 Mark 2GP Gas





Donut Robot® Mark 5 Automatic fryer with depositor, for standard size cake donuts, 1-9/16” plunger and hopper, automatic conveyor, 3-3/4” flight bar spacing, temperature adjustment dial, speed adjustment dial, drain, capacity approx 56 doz/hr, ETL listed

Options: • Voltage, Plunger type as belowAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon, Drain Valve, EZMelt18. See Donut Robot accessoriesCan be used for mini donuts with accessory mini donut hopper • and plunger MK-1502-1 (see Donut Robot accessories)Using the supplied drain requires Drain Valve accessory. (EZMelt • requires drain valve, Filter Flo does not)Can be used for yeast raised donuts with Feed Table, Trays and • Cloths (see Donut Robot accessories)


22041 208/240V/50/1, Star plunger, CE


22018 208/240V/50/3, Star plunger, CE


21647 380/415V/50/3, Star plunger, CE

Donut Robot® Mark 5GPAutomatic fryer with depositor, for mini donuts, with 1” double plunger and hopper, automatic conveyor, 3” flight bar spacing, temperature adjustment dial, speed adjustment dial, drain, capacity approx 226 doz/hr, ETL listed

Options:• Voltage as belowAccessories:• Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon, Drain Valve, EZMelt18. See Donut Robot accessoriesCannot be converted for standard size donuts• Using the supplied drain requires Drain Valve accessory. EZMelt • requires drain valve, Filter Flo does not

21657 208/240V/50/1, CE

22017 208/240V/50/3, CE

22317 380/415V/50/3, CE

Donut Robot® Mark 6Donut Robot® fryer with automatic conveyor, for standard size cake or raised donuts, 3-3/4” or 4-1/2” flight bar spacing, temperature adjustment dial, speed adjustment dial, drain, no cake donut deposi-tor, capacity approx 112 doz/hr, ETL listed

Options:• Voltage and flight bar spacing as belowAccessories:• Type F cake donut depositor, Rack Loader, Drain Valve, EZMelt34. See “Donut Robot Mark 6 Accessories” sectionUsing the supplied drain requires Drain Valve accessory• Used as part of a yeast raised donut system with Feed Table, • Trays and Cloths (see Donut Robot Mark 6 Accessories)

21640 208/240V/50/3, 3-3/4” spacing

22443 380/415V/50/3, 4-1/2” spacing, ‘Deep’ model

22489 Mark 5

21657 Mark 5 GP (mini donuts)

21640 Mark 6

22443 Mark 6 (Deep)





U-1001 Plain plunger

U-1001S Star Plunger

MK-1023x1 Double Mini Donut Plunger

MK-1502-1 Mini Donut Hopper + Plunger

DR42-1018X1.563 Dunkerette attachment

DR42-1017X1.563 Ball attachment

DR42-1016X1.563 Nugget attachment

Plunger Selection for Donut RobotsThese plungers below are compatible with Donut Robots.

Notes:

Hopper and plunger sizes must match. For instance, a 1-9/16’ plunger will not work with a mini donut (‘double miniature’) hopper.

All current plain and star plungers are 1-9/16” in diameter. Some older model Donut Robots may have 1-7/16” or 1-13/16” plungers, which are no longer available. If these plungers need to be replaced, a 1-9/16” hopper will be needed in addition to the 1-9/16” plunger.

Attachments are small add-ons to a plain or star plunger. Donuts produced by the Ball and Nugget attachments can either stick together or separate (as shown at right) depending on the height of the hopper above the shortening.

The plungers on this page fit the Donut Robot depositor only. They will not fit Type B, Type F, or Type N depositors. See the Cake Donut Deposi-tors section for these plungers.

A star plunger is identical to a plain plunger, but with extra ridges on the plunger that create star like ridges on a ring donut. The star plunger normally makes slightly more rounded and consistent shape ring donuts than a plain plunger.

Donut Robot Mark 6 normally uses a Type F depositor. The plungers on this page do not apply to Mark 6 except in cases where the Mark 6 is equipped with a Donut Robot depositor.

U-1001 Plain plunger, 1-9/16” diameter

U-1001S Star plunger, 1-9/16” diameter

MK-1023x1 Double plunger for mini donuts (1” diameter)

MK-1502-1 Mini-donut hopper and 1” double plunger, for Donot Robot® Mark 1, 2 and 5. For machines older than 2001, call factory for compatibility

DR42-1018X1.563 Dunkerette attachment (cuts two), 1-9/16”

DR42-1017X1.563 Ball attachment (cuts four ball shapes), 1-9/16”

DR42-1016X1.563 Nugget attachment (cuts three ball shapes), 1-9/16”

DONUT ROBOT® PLUNGER SELECTION




EZ Melt 18

H&I-4H&I-2

HG-18C

Shortening Reserve TankFilter-Flo®

Siphon

Fryer

EP18-24

Mark V

Donut Finishing Center

HG-18EZ Easylift

Proofing Tray

Mark II

Gas Mark II

Rack Loader

Roto Cooler

Proofer

Feed Table

Shortening Filter

Feed Table

Fryer Mounting

Table

Glazer Icer

Sugaring Table

Glazing screens

Mark 2/ Mark 5 System

Feed Table Support

Fryer Table

Choosing Accessories for Mark 2 and Mark 5 systemsWith our range of accessories, you can choose what you need, whether it’s for a simple mini donut operation, or a donut shop making both cake and yeast raised donuts. Part numbers are on following page.

Drain w/Valve

Proofing Cloth

ACCESSORIES FOR DONUT ROBOT® MARK 2 – 5




Accessories for Donut Robot® Mark 1, 2 and 5

Collecting And Cooling Donuts

22103 Roto-Cooler with Standard Tray (24”/61cm, white polyethylene). 120V/50/1, plugs into Donut Robot® fryer

86100 Rack Loader, collects donuts onto 17” x 25” screens

Call Rack Loader for Gas Mark 2 and for Mark 6 Deep (tall version)

SL200-0004 (1) Glazing screen for Rack Loader, 17” x 25” (up to 36 recommended)

Shortening Filtration

DR42-1048 Filter Flo Siphon (removes and cleans shortening), QUICKSHIP ITEM


DMM-1004 Shortening Reserve Tank - fits Mark 1

MKV-1012 Shortening Reserve Tank - fits Mark 2, Mark 5, QUICKSHIP ITEM

MK-0557-11.5 Drain valve for Donut Robot fryers (Note: table supporting fryer needs a hole for drain and 16”(41cm) space below), QUICKSHIP ITEM

EZMelt18 Melter-Filter for Mark 2/5. This is the electric powered filtering method recommended by Belshaw. See Filters section

Mini Donut Production Kit

MK-1502-1 Mini-donut hopper and 1” double plunger, for Mark 1, 2 and 5. For machines older than 2001, call factory for compatibility

Yeast-Raised Donut Production (Mark 2 & 5 only)

8352043 Feed Table, for Mark 2 / Mark 5 (plugs into Donut Robot® fryer), CE

FT42-0052 Proofing cloth trays for Mark 2/5 (up to 36 recommended)

FT100-0532 Proofing cloths with rods for Mark 2/5 (up to 36 recommended)

FT42-0516 Splash guard for Mark 2/5 Feed Table

MK6-1007 Support table for Mark 2 Fryer, Roto Cooler, and EZMelt18 Filter

MK6-1005 Support table for Mark 5 Fryer, Rack Loader, and EZMelt18 Filter

FT6-1004 Support table for Mark 2/5 Feed Table

Icers, Glazers, Proofers

See further sections of this catalog

22103 Roto Cooler

86100 Rack Loader w/ SL200-0004 Glazing Screen

DR42-1048 Filter Flo Siphon

MKV-1012 Shortening Reserve Tk.

Drain Valve / EZMelt 18

Mini Donut Kit Feed Table FT Tray and Cloth Feed Table Support FryerTable Support

ACCESSORIES FOR DONUT ROBOT® MARK 1, 2, and 5




Cake Donut Depositor

Shortening Filter

EZ Melt 34

Mark 6 automatic fryer

HG18-EZ Easylift

Glazer

Icer

Fryer

Type ‘F’ Depositor

Feed Table Support

Feed Table

Fryer Mounting Table

Proofing Cloths

RL-18 Rack Loader

Glazing screens

Proofing Trays

H&I-2

H&I-4

Fryer Mounting

Table

Feed Table

Choosing Accessories for Donut Robot® Mark 6 system

Mark 6 System

HI-18

EP18-24

Proofer

Drain w/Valve

DONUT ROBOT® MARK 6 SYSTEM




83520114 Feed Table Proofing Trays & ClothsFT6-1004

Feed Table Support FT6-1004 FryerTable Support

MARK 6 ACCESSORIESCollecting And Cooling Donuts

86100 Rack Loader, collects donuts onto 17”x25” screens

861001 Rack Loader, collects donuts onto 17”x25” screens, for Mark 6 ‘Deep’ version

SL200-0004 (1) Glazing screen for Rack Loader, 17” x 25” (up to 36 rec-ommended)

Filtering And Recycling

MK-0557-11.5 Drain and valve for Donut Robot fryers

20515 EZMelt 34 Melter-Filter, 208/240V, 50/60/1, CE

20503 EZMelt 34 Melter-Filter, 240V/50/1, Aus/NZ

Cake Donut Production

F0032000C 230V/50/1, CE

0405 Column mount for Type F, mounts to FT6-1004 (see below)

Plungers and Cylinders: See ‘Cake Donut Depositors’ section

Yeast-Raised Donut Production

83520114 Feed Table, for Mark 6 (plugs into fryer), CE

37200 Feed Table, for Mark 6 ‘Deep’ (plugs into fryer), CE

FT6-0007SH Feed Table extension for Mark 6

FT6-0005 Proofing trays for Mark 6 (up to 48 recommended)

FT2DW-0510 Proofing cloths with rods for Mark 6 (up to 48 recommended)

FT6-1004 Support table for Mark 6 Feed Table

Icers, Glazers, Proofers

See Icer, Glazer and Proofer sections of this catalog

86100 Rack Loader with SL200-0004 Glazing Screen

MK-0557-11.5 Drain and valve

20515 EZMelt 34

F0032000C Type F w/ 0405 Column Mount

ACCESSORIES FOR DONUT ROBOT® MARK 6




Insider Clean-Air Ventless Donut SystemThe Insider is Belshaw’s all-in-one donut system that eliminates exterior ventilation. The Insider cabinet contains a wealth of clean-air filters, and certified fire suppression capability.

The Insider is designed to attract the interest of passers-by, with large wrap-around viewing windows. Customers in high traffic areas can watch the Insider frying donuts automatically. The operator needs only to fill the hopper and empty the Roto-Cooler.

The new Insider addresses fire prevention, clean air, and sanita-tion requirements. Cabinet and fryers are UL-197 and NSF-4 listed for safety and sanitation. (There is no UL-710B certification for clean-air recirculation)

Standard equipment includes Cabinet, Donut Robot® Fryer, either the Mark 2 or Mark 2GP, and Roto Cooler. The Insider uses only one main plug for the whole system, and is easily moved from place to place on casters.

Call Insider Cabinet with Donut Robot® Mark 2 fryer and Roto Cooler, 208-240V

Call Insider with Donut Robot® Mark 2 GP fryer, and Roto Cooler, 208-240V

Options: EZMelt18 Filtration system, voltage to match Insider Cabinet • Voltage (see Shortening Filters section)OR Shortening Reserve Tank #MKV-1012 AND Filter Flo • Siphon #DR42-1048Roto-Cooler Item #22104, 120V/60/1, plugs into Donut Robot•

SNACKMASTER Snack Food Frying SystemFor restaurants, bars, supermarkets, convenience stores and anywhere fresh food is consumed! Snack Master submerges and fries tortilla chips, chicken nuggets, mozzarella sticks, chicken pieces, tempura and numerous other fried products automati-cally, starting from frozen or room temperature.

The whole system has a compact footprint of 72” x 32”. Snack Master is generally a one-person operation, with no standing over an open fryer.

Capacity is approx 140 lbs (64 kg) tortilla chips per hour. Other products can vary.

Standard ComponentsThe system is complete and includes Fryer, Filtering system, Support table, and a Catch Pan, as shown at right.

Call Snack Master Snack Food Frying System 208-240V

Insider with Mark 2GP r

Donut Robot® Mark 2

22103 Roto Cooler

Snack Master Frying System

INSIDER CLEAN AIR VENTLESS




Thermoglaze SystemBelshaw’s Thermoglaze System provides the best method for reheating and selling pre-fried frozen donuts, cinnamon rolls, fritters and similar products. The Thermoglaze system does not require a ventilation hood, shortening, or special skills to operate. Only one operator is needed.

The Thermoglaze system consists of two components: the Thermolizer, for thawing frozen donuts, and the Ther-moglaze, for heating and glazing. The TG-25 has an integrated, built-in Thermolizer; the TG-50 has a separate Ther-molizer.

Donuts are thawed, heated and glazed all on the same glazing screen. After a 20-30 minute thaw in the Thermolizer, the first screen of donuts can be processed in less than 5 minutes. Donuts can be held in the Thermolizer for up to five hours. This allows flexibility in preparing, packaging or selling finished product.

Thermoglaze TG-25Pre-fried frozen donut system, with integrated Thermolizer, Oven, and Glazer, production rate 25 dozen/hour, ETL listed (separate Thermolizer not required)

OptionsVoltage, as below• Autowater (Thermolizer keeps water level topped up automatically when • connected to water supply)TJ-0001 screens,12.5” x 17” (up to 36 recommended depending on usage)•

22180 220/240V,50/60Hz,1ph

22333 220/240V,50Hz,1ph, CE

22334 220/240V,50/60Hz,1ph, CE, Autowater

22282 415V,50hz,3ph, CE

22283 415V,50hz,3ph, CE, Autowater

22257 415V,50hz,3ph, Aus/NZ, Autowater

Thermoglaze TG-50Pre-fried frozen donut system, with integrated oven and glazer, production rate 50 dozen/hour, ETL listed

OptionsVoltage, as below• SL200-0004 screens,17” x 25”(up to 60 recommended depending on usage)•

22449 415V,50hz,3ph, CE

22450 415V,50hz,3ph, Aus/NZ

Thermolizer TZ-17For thawing frozen donuts and keeping them up to 5 hours, before processing on TG-50, capacity approximately 34 dozen/hour. Two Thermolizers may be needed to achieve full-time 50 Doz/Hr procuction on the TG-50.

OptionsVoltage, as below•

20221 240V,50hz,1ph, CE

20257 200V,50hz,1ph

22180 TG-25

22449 TG-50

SL200-0004 Screen and 20221 Thermolizer

THERMOGLAZE FROZEN DONUT SYSTEM




Type B Depositor Type B rotary crank cake donut depositor with hopper, 15lbs (6.8kg) capacity, NSF listed. Mounting system, cylinder and plungers are ordered separately.

Options: No hopper, as below•

Accessories: Plunger and Cylinder ordered separately from list on following page• Mounting System (Column or Wall mount)• Bracket Arm Height Adjuster•

B0001000 Standard Type B depositor with hopper

0226CHS Type B depositor, without hopper

0405 Column mounting system for Belshaw fryers

0406 Wall mounting system

P-0002 Bracket plate installed as standard equipment on all Belshaw floor model fryers. May be used for stability if Column mount #0405 is installed on a non-Belshaw fryer.

0400 Bracket arm height adjuster (for easier height adjustment)

0290 Hopper for Type B / Type F depositors

Type F DepositorType F electric depositor and hopper, 15lbs (6.8kg) capacity, maximum 115 deposits/minute, with touch sensitive handle. Mounting system, cylinder and plungers are ordered separately, ETL and NSF listed.

IOptions: Voltage, ‘Single-lead’ (=58 deposits/min instead of 115), Deluxe model • with polished frame


F0032000C 230V/50/1, CE

F00160003 220V/50/1, CE, Single Lead (= 58 deposits/minute)

0227M-DLX-220

Type F Deluxe, 220V,50/60hz,/1ph, no hopper

0290 Hopper for Type B, Type F and Type F Deluxe depositors

0405 Column mounting system

0406 Wall mounting system

P-0002 Bracket plate installed as standard equipment on all Belshaw floor model fryers. May be used for stability if Column mount #0405 is installed on a non-Belshaw fryer.

0400 Bracket arm height adjuster for easier height adjustment

B0001000 Type B

F0032000C Type F

0405 Column Mount w/optional Bracket Plate

0406 Wall Mount

Supplied collar (left) and 0400 Adjuster

0227M-DLX-220 Type F Deluxe with 0290 Hopper

CAKE DONUT DEPOSITORS • TYPE B •TYPE F




Plungers And Cylinders For Type B And F DepositorsItem Number Plunger variety Photo Donut type

7SSx[size][size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2

Example: 7SSx1-1/2

Size = diameter in inches

Plain PlungerUsed for plain ring donuts (using standard cake donut mix) or for 'Old Fashion' donuts (using Old Fashion mix).

7SC-SSx[size][size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2

Example: 7SC-SSx1-1/2


Star PlungerThe Star plunger typically makes a ring donut with a more consistent, rounder hole than the plain plunger, with a star pattern around it.

7B-1009x[size][size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2

Example: 7B-1009x1-7/8


French Cruller Plunger French Cake PlungerUse with French Cruller mix to make French Crullers. You can also make a 'French Cake' donut that is made with standard cake donut mix and looks similar, but without the eggy flavor.

7F-1004x[size][size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2

Example: 7B-1004x2


Krinkle PlungerThis can be the most attractive of all the cake donuts. Features eight distinctive ball shaped sections all joined together like a necklace.

7G-1000-[code][code]=4 digit code for diameter, number of holes, and size of holes.

Ball plungers are made to order. Contact Belshaw when ordering

Example: 7G-1000-082D

Ball Plunger (2,3,4 or 5 Holes)Produces ball shaped donuts or 'donut holes'. With a compatible mix recipe, can also make other products such as hushpuppies, loukoumades, falafel, fish balls, and more.

7H-1000-[code] (makes 1)

7H-1001-[code] (makes 2)

[code]=3 to 5 digit code for diameter, height and lenght of slot

Example: 7H-1001-102AEStick plungers are made to order. Contact Parts Dept when ordering

Stick Plunger (1 or 2 Slots)Makes stick donuts with 1 or 2 slots. The size of the donut will depend on the size of the slot and on the dial setting of the depositor. (Setting 1 will be short, setting 2 or 3 will be longer)

7-1025x1-3/4[size]=1-3/4 only


Dunkerette PlungerPlain plunger with a divider that forms 3 deposits, each approximately one third of a ring donut

35SSAx[size A] 35SSBx[size B][size A]=1-1/2, 1-5/8, or 1-3/4 [size B]=1-7/8 or 2

Example: 35SSAx1-3/4 Example: 35SSBx2 Size = diameter in inches

Cylinder for Type B/FPlunger size and cylinder size must always match. For example, a 1-3/4" plunger must always be used with a 1-3/4" cylinder. However, you can use any variety of 1-3/4" plunger with a cylinder of the same size.

PLUNGERS FOR TYPE B and TYPE F




Type N Depositor Type N rotary crank donut depositor with hopper, 12lbs (5.5kg) capac-ity, NSF listed. Mounting system, cylinder and plungers are ordered separately.

Type N is used for Belshaw Cut-N-Fry for Donuts/Hushpuppies/Loukou-mades.

Options: No hopper, as below•


N20000 Standard Type N depositor (includes hopper)

N-1001 Type N depositor without hopper

N-1033 Column mounting kit with short extender arms. Includes column and bracket for fryer mount only. Used for Belshaw’s Cut-N-Fry for Donuts, Cut-N-Fry for Loukoumathes, and Cut-N-Fry for Hushpuppies.

N-1036 Wall mounting kit with long extender arms and bracket for wall mounting.

0400 Bracket arm height adjuster (for easier height adjust-ment)

Type N PlungersType N plungers are shorter than Type B/F plungers and not inter-changeable. See previous page for photos of plungers and the donuts they produce.

Plunger size and cylinder size must always match. For example, a 1-3/4” plunger must always be used with a 1-3/4” cylinder.

N-1007SS Type N Plain plunger, 1½” - 2” (also makes ‘Old Fashion’ donuts with Old Fashion mix)"

N-1007SSS Type N Star plunger, 1½” - 2”

N-1008SS Type N French Cruller plunger, 1½” - 2”

N-1012SS Type N Krinkle plunger, 1½” - 2”

N-1009BSS Type N Ball plunger, 1½” - 2”

N-1009SS Type N Stick plunger, 1½” - 2”

N-1009BSS-103C Type N standard Loukoumathes plunger, with 3 x 3/4” diameter holes, 2” diameter

N-1009BSS-103DB Type N standard Hushpuppy plunger, with 3 x 7/8” x 1” oval shaped holes, 2”

N-1035 Type N Cylinder, obsolete for old Type N's only

N-1035L-A Type N Cylinder, standard cylinder 1½” to 1¾”

N-1035L-B Type N Cylinder, standard cylinder 1-7/8” to 2”

N20000 Type N with N-1033 Column Mount

N20000 Type N with N-1036 Wall Mount

(Left) Supplied collar 0400 Bracket Arm Adjuster

CAKE DONUT DEPOSITORS • TYPE N




Plungers & Attachments for Type K Donut Depositor

K-1011A Type K (Donut) Plain plunger

K-1011S Type K (Donut)

Star Plunger

DR42-1018X1.563 Type K (Donut)

Dunkerette attachment

DR42-1017X1.563 Type K (Donut) Ball attachment

DR42-1016X1.563 Type K (Donut)

Nugget attachment

Type K Pancake Dispenser • Type K Donut Depositor

The Type K Pancake Dispenser is the restaurant industry standard for pancake production.

The Type K Donut Depositor is popular with light volume donut makers for use with smaller fryers such as Belshaw Adamatic’s 616B.

All depositors are NSF listed.

When ordering, please note:Each Type K depositor comes with a plunger (NOT ordered separately). Cylinders • are built into each depositor and cannot be removed. In most cases, a Type K (Donut) will work with a Pancake plunger, but this is not • guaranteed. A Type K (Pancake) will not work well with a Donut plunger•

Accessories: Type K stainless steel Holder (pictured right)•

8504011 Type K Pancake Dispenser

8504022 Type K Donut Depositor (with 1-9/16" plain plunger)

8504023 Type K Donut Depositor (with 1-9/16" star plunger)

8504052 Type K Donut Depositor (with single 1" plunger)

8504012 Type K Pancake Dispenser with K-1016WSS Holder

K-1016WSS Holder for Type K, stainless steel

K-1013A Plunger for Type K Pancake Dispenser

K-1011A Plunger for Type K Donut Depositor, Plain, 1-9/16"

K-1011S Plunger for Type K Donut Depositor, Star, 1-9/16"

K-1042 Plunger for Type K Donut Depositor, deposits 1 mini donut, 1"

DR42-1018X1.563

Dunkerette attachment for Donut Depositor (cuts two), 1-9/16"

DR42-1017X1.563

Ball attachment for Donut Depositor (cuts four ball shapes), 1-9/16"

DR42-1016X1.563

Nugget attachment for Donut Depositor (cuts three ball shapes), 1-9/16"

8504011 Type K Pancake with K-1016WSS Holder

8504022 Type K Donut with K-1016WSS Holder

TYPE K DEPOSITORS




‘SF’ and EZMelt Shortening Filters Belshaw’s SF and EZ Melt shortening filters effectively clean and recycle shortening in any fryer with shortening capacity up to 211 lbs (96 kg).

Features of both SF and EZMelt models: All models filter shortening through a long-life synthetic mesh filter • (lasts one normal year when used properly)All models top up fryer levels by pumping shortening back through a • flexible rinse hose. Pump is activated by foot pedal. All models have a range of fixed refill hoses for pumping directly • back to Belshaw Adamatic floor model and Donut Robot fryers. The refill hoses are a very useful convenience and are safer to operate, but not absolutely necessary. (optional, order separately from list on following page). All models are ETL listed•

SF models: These are unheated filters. In practice, this means that:Shortening should be filtered and recycled through the units while • still warm and should not be allowed to solidify.New shortening should be added directly to the fryer.• Most liquid shortenings, particularly Zero Trans Fat shortening, will • clog the pump and cause it to wear out prematurely if the shorten-ing allowed to cool and solidify. For this reason the SF models are not recommended for ZTF shortenings, and the warranty is void if so used. (EZ Melt can be used instead)

EZ Melt models: EZMelts are identical to SF Filters, with these addi-tional features:

EZMelts are melter-filters with an element that maintains temperature • at about 230°F/110°C. EZMelts include a cube cutter for quickly and safely loading and • melting cubes of solid shortening up to 50 lb (23kg). Shortening does not have to be loaded directly into fryer, which is potentially unsafe.EZMelts are warranted for all common shortenings.• If used with Donut Robot• ® fryer, a drain and valve must be in place on the fryer.

21504 SF18, 208/240V,50/60hz,1ph, CE for 618L, 718LCG

21508 SF24, 208/240V,50/60hz,1ph, CE for 624, 724CG

21512 SF34, 208/240V,50/60hz,1ph, CE for 734CG

20507 EZMELT18, 208/240V,50/60hz,1ph, CE 618L, 718LCG, Donut Robot® Mark 2, Mark 2GP, Mark 5, Mark 5GP, Insider

20501 EZMELT18, 240V/50/1, Aus/NZ 618L, 718LCG, Donut Robot® Mark 2, Mark 2GP, Mark 5, Mark 5GP, Insider

20511 EZMELT24, 208/240V,50/60hz,1ph, CE for 624, 724CG

20502 EZMELT24, 240V/50/1, Aus/NZ for 624, 724CG

20515 EZMELT34, 208/240V,50/60hz,1ph, CE for 734CG, Donut Robot® Mark 6, Mark 6 Deep

20503 EZMELT34, 240V/50/1, Aus/NZ for 734CG, Donut Robot® Mark 6, Mark 6 Deep

SM100-0002 Filter bag, long-life synthetic for SF18, SF24, EZMelt18, EZMelt24

EZ34-0027 Filter bag, long-life synthetic for SF34, EZMelt34

20507 EZMelt 18

20511 SF24

20515 EZMelt 34

FILTRATION SYSTEMS • SF • EZMELT




Fill Hoses for SF and EZMelt Filters An optional safety and convenience feature for SF and EZMelt filters. The fill hose provides a fixed connection from SF or EZMelt to fryer. When a fill hose is attached, an operator can top up shortening at any time using the foot pedal on the SF or EZMelt. Without a fill hose, the operator can use the hand held Rinse hose.

21501 Fill Hose Assembly For 618L, 718LCG, 718LFG

21503 Fill Hose Assembly 624, 724CG, 724FG

21505 Fill Hose Assembly 734CG, 734FGG

21507 Fill Hose Assembly, 30" long, Right Hand operation

Donut Robot® Mark 2, Mark 2GP, Mark 5, Mark 5G

21509 Fill Hose Assembly, 30” long, Left hand operation


21511 Fill Hose Assembly, 42" long, Left Hand operation


20504 Fill Hose Assembly, 48" long, operating from back


20505 Fill Hose Assembly, 48" long, operating from front


20508 Fill Hose Assembly, 60" long, Right Hand operation)


Filter Flo SiphonHeavy duty siphon for recycling shortening in compatible Donut Robot®, 616B, or Cut-N-Fry fryers. Operates with 1-2 squeezes of the red bulb at the top. A metal bucket large enough to hold the entire contents of the fryer is required to accept shortening. The bucket should be able to withstand the temperature of the shortening when filtered. (Bucket not supplied)



Shortening Reserve TankSimple and effective! The SRT positions directly above the Donut Robot® fryer. The operator loads it with cold shortening, and the heat from the fryer warms it. The operator then inserts the shortening into the fryer whenever needed, by pushing the stop valve.

DMM-1004 Shortening Reserve Tank - fits Mark 1

MKV-1012 Shortening Reserve Tank - fits Mark 2/5

Rinse Hose (standard equipment)

21501 Fill Hose (optional)


MKV-1012 Shortening Reserve Tank

FILTRATION SYSTEMS • FILTER FLO • FILL HOSES




PROOFER EP18/24 • GLAZERS HG / HGEZ

EP18/24 ProoferThe EP18/24 is designed for donut production on all standard floor model donut fryers, as well as general bakery use. It accepts Proofing and Frying screens from floor model fryers up to 24”x 24”.

EP18/24 has 6 doors and 17 shelves for convenient use. An operator can insert or pull out donut screens at any time. Plexi-glass doors allow the operator to check how the contents are rising. The proofer is also suitable for baking pans and general bakery usage.

EP18/24 does not accept screens from 616B fryers and Cut-N-Fry (too small), or 734 (too large). EP18/24 does not accept baking racks.

ETL listed

Options: Voltage, Autowater as below

30124 240V/50-60/1, autowater, CE

30127 240V/50-60/1, manual fill, CE

30128 240V/50/1, manual fill, AUS-NZ

30129 240V/50/1, autowater, AUS-NZ

HG / HGEZ Glazers Glazers are available to match standard sizes of fryers/screens. All glazers listed below include casters, stainless steel cover, glaze applicator and drain. Drain trays are optional and pur-chased separately. All models are NSF listed.

HG-C models: Standard glazers with hand held glaze applicator

HG-EZ models: These eliminate heavy lifting, with rails for the glaze applicator to slide on as it applies a ‘curtain’ of glaze. The rail assembly easily tilts down to fill the applicator with glaze, again without lifting by hand.

Options: Drain Tray, Glazing Screens

22528 HG18C, for 17”x 25” screens

22531 HG18EZ, for 17” x 25” screens

22534 HG24C, for 23”x 23” screens

22535 HG24EZ, for 23”x 23” screens

HG18EZ-1002 Drain tray for HG18/HG18EZ (attaches to side)

HG18EZ-1003 Drain tray for HG18/HG18EZ (attaches to end)

HG24EZ-0534 Drain tray for HG24/HG24EZ (attaches to side)

HG24EZ-1003 Drain tray for HG24/HG24EZ (attaches to end)

SL200-0004 Glazing screens for HG-18 / HG-18EZ, each, 17" x 25"

HG24-0001 Glazing screens for HG-24 / HG-24EZ, each, 23" x 23"

30124 EP18/24 Proofer

22528 HG18C Glazer w/ HG18EZ-1002 drain tray

22531 HG18EZ Glazer w/ HG18EZ-1002 drain tray and SL200-0004 Glazing Screenr

22534 HG24EZ Glazer w/ HG24EZ-0534 drain trayr




ICING AND FINISHING TABLES

H&I-2 • H&I-4 Icing Bowl WarmersWater-warmed icing warmers for gentle heating, with two or four 13” (33cm) bowls. Heat to approximately 135°F/57°C. ETL listed.

Options: Voltage as below; 2 or 4 bowls

22242 H&I-2, 208/240V, 50/60hz, 1ph, CE

21180 H&I-4, 208/240V, 50/60hz, 1ph, CE

Donut Finishing Center Very economical on space! The Donut Finishing Center contains 3 large air heated pans and 4 smaller unheated pans for sprinkles. Two fold-down extensions. The DFC is not ETL-listed.

21755 DFC-220/240V, 50/60hz,1ph, CE

Sugaring TableBelshaw’s Sugaring Table contains two large bowls inside stainless steel drawers for dry sprinkles and finishes. The sugaring table can be docked to H&I models. No power required. ETL listed. Option: Upper shelf.

21036 ST-2-NS-STD

ST-1001 UPPER SHELF FOR 21036

High Production Icers • HI18C • HI18F • HI24FBelshaw’s HI-series Icers provide fast, uniform icing of cake and yeast-raised donuts (or any product under 2 inches in height). Full screens or bun pans can be iced in seconds. All models ETL and NSF listed.

HI18• accepts screens and pans up to 18” x 26” (24 typical donuts)HI24• accepts screens and pans up to 24” x 24” (36 typical donuts)

Options: HI18C model is Countertop• HI18F is floor standing with 4” casters• HI24F model is floor standing with 4” casters •

20018 HI-18C-240V,50/60hz,1ph, CE

20012 HI-18F-240V,50/60hz,1ph, CE

20015 HI-24F-240V,50/60hz,1ph, CE

HI18-0001 Icing pan, stainless steel for HI18 model icers

HI24-0006 Icing pan, stainless steel for HI24 model icers

HI18-1008 Heating panel assembly for HI18 model icers, 240V

HI24-1000-240CE Heating panel assembly for HI24 model icers, 240V

22242 H&I-2, 21180 H&I-4

21755 Donut Finishing Center

21036 Sugaring Tbl + ST-1001 upper shelf

20018 HI18C Icer (Countertop)

20015 HI24F (Floor standing w/casters)




‘AMD’ MODEL YEAST RAISED DONUT CUTTERS

AMD Models: Yeast Raised Donut CuttersSingle cutters and roller-style cutters for yeast raised donuts in several shapes.

0183 Kaiser Roll cutter, aluminum

AMD-0080 Donut hole roll cutter, cuts five across, 1-1/4" diameter, hexagonal

AMD-0081 Ring donut cutter, single cut, 2-3/4" diameter, round

AMD-0081-2.00 Ring donut cutter, single cut, 2" diameter, round

AMD-0081-3.00 Ring donut cutter, single cut, 3" diameter, round

AMD-0081-3.25 Ring donut cutter, single cut, 3-1/4"" diameter, round

AMD-0081-3.5 Ring donut cutter, single cut, 3-1/2" diameter, round

AMD-0082 Bismarck shell cutter, single cut, 2-3/4" diameter, round

AMD-0082-2.50 Bismarck shell cutter, single cut, 2-1/2" diameter, round

AMD-0082-3.00 Bismarck shell cutter, single cut, 2-3" diameter, round

AMD-0083 Ring donut cutter, roller-style, 2-across, 2-3/4" diameter, hexagonal

AMD-0083-3.00 Ring donut cutter, roller-style, 2-across, 3" diameter, hexagonal

AMD-0084 Bismarck shell cutter, roller-style, 2-across, 2 3/4" diameter, hexagonal

AMD-0084-3.00 Bismarck shell cutter, roller-style, 2-across, 3" diameter, hexagonal

AMD-0085 Long John cutter, roller-style, 3-across, 1 1/2" x 5"

AMD-0086 Ring donut cutter, roller-style, 5-across, 2 3/4" diameter, hexagonal

AMD-0086-3.00 Ring donut cutter, roller-style, 5-across, 3" diameter, round

AMD-0087 Bismarck shell cutter, roller-style, 5-across, 2 3/4" diameter

AMD-0087-3.00 Bismarck shell cutter, roller-style, 5-across, 3" diameter, round

AMD-0088-2.375 Ring donut cutter, roller-style, 2-across, 2 3/8" diameter, round

AMD-0088-2.75 Ring donut cutter, roller-style, 2-across, 2 3/4" diameter, round

0183 Kaiser Roll Cutter AMD-0080 Hole Cutter AMD-0081 Ring Cutter AMD-0082 Bismarck Cutter

AMD-0083 Hex Cutter AMD-0085 Long John Cutter AMD-0087 Bismarck Cutter



Documents

ORDERS AND INQUIRIES - autobakeproductions.comautobakeproductions.com/Upload/Products/Belshaw-2012-Product-Guide... · ORDERS AND INQUIRIES Contact your Belshaw Adamatic distributor,