OptiX RTN 600 Configuration-- Using T2000 and T2000 Web LCT

  • View
    806

  • Download
    5

Embed Size (px)

DESCRIPTION

Optix RTN 600 Configuration document

Text of OptiX RTN 600 Configuration-- Using T2000 and T2000 Web LCT

OptiX RTN 600 ConfigurationUsing the T2000 and T2000 Web LCT

www.huawei.com

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Foreword

Huawei provides NE-level, subnet-level and network-level

management systems for the RTN 600 series products.

This course describes the NE-level management system

OptiX iManager T2000 Web LCT and the subnet-level management system OptiX iManager T2000.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 2

Reference

Digital Microwave Communication principles

OptiX iManager T2000 Management System Solution V2.31

OptiX iManager T2000 Web LCT Installation Guide and User Guide

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 3

Objective sUpon completion of this course, you will be able to: Describe the functions of the T2000 and the T2000 Web

LCT. Install the T2000 Web LCT. Configure services and protection by using the T2000

and the T2000 Web LCT.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 4

Contents1.

Introduction to Networks Management Systems

2. Introduction to T2000 Web LCT 3. Introduction to the T2000

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 5

Comprehensive Management System SolutionIntegrated NMS & OSS

OSS or integrated NMSCORBA CORBA CORBA

Service management layer Network management layer

iManager T2100MML

iManager T2100

MML

MML

iManager T2000 iManager T2000 LCT Qx Qx

iManager T2000 Qx

iManager T2000 Qx

NE management layer NE layer

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 6

Introduction to Management Systemsof each management system is as follows: The orientation

iManager T2000 LCT

The T2000 local craft terminal (LCT) realizes the local maintenance and equipment turn-up of Huawei OptiX products. The iManager T2000 (T2000 for short) is a subnet management system (SNMS) for transport networks. The T2000 manages the full series of Huawei OptiX products. The T2000 supports all functions of the NE layer and some of the network layer management functions. The iManager T2100 (T2100 for short) is a network-level management system that uniformly manages the full series of Huawei OptiX products. It manages large-scale optical transport networks in a uniform manner. The iManager MDS (MDS for short) is a business-level management system for transport networks. It assists users to plan and simulate an optical transport network.Page 7

iManager T2000

iManager T2100

iManager MDS

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Contents1.

Introduction to Management Systems

2. Introduction to the T2000 Web LCT

3. Introduction to the T2000

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 8

Contents

Introduction to the T2000 Web LCT

2.1 Main Characteristics 2.2 Application Scenario 2.3 Installation Guide 2.4 Connecting to NEs 2.5 Configuration Operations

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 9

T2000 Web LCT Main CharacteristicsThe characteristics of the T2000 Web LCT are as follows:

Web-based solution Per-NE configuration and maintenance Access to a local NE through a LAN/RS 232

Access to a remote NE through DCC Management of NEs of various types Concurrent login to a maximum of 32 NEs

Integration with the T2000, T2100 or third-party management systemPage 10

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

T2000 Web LCT FunctionThe T2000 Web LCT provides the following NE-layer management functions:

Service configuration (including PDH and SDH microwave services) Protection configuration (intermediate frequency protection, SNCP, LMSP) Setting and query of the intermediate frequency attributes Setting and query of the radio frequency attributes Data services (the 10M/100M fast Ethernet transparent transmission board EFT4 is supported) Setting and viewing of alarms and performance data Communication and securityPage 11

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

ContentsIntroduction to the T2000 Web LCT

2.1 Main Characteristics 2.2 Application Scenario 2.3 Installation Guide 2.4 Connecting to NEs 2.5 Configuration Operations

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 12

T2000 Web LCT Application ScenarioStand-alone

The equipment maintenance personnel installs the T2000 Web LCT on a PC.

The equipment maintenance personnel manages local or remote NEs by using the T2000 Web LCT.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 13

T2000 Web LCT Application ScenarioIntegrated

The personnel at the network operations center install the EMS or NMS on a PC. Install the T2000 Web LCT as a part of the EMS. The NMS need not be installed. The personnel at the network operations center starts the T2000 Web LCT by using the EMS or NMS client.

NMS

DCNEMS EMS

NE networkCopyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

NE networkPage 14

Contents

Introduction to the T2000 Web LCT

2.1 Main Characteristics 2.2 Application Scenario 2.3 Installation Guide 2.4 Connecting to NEs 2.5 Configuration Operations

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 15

T2000 Web LCT Installation GuidePre-installation

Configuration requirements

The T2000 Web LCT runs on the Windows operating system.

Hardware requirements

CPU: Pentium III 700 MHz or higher RAM: 256 MB (recommended 512 MB or higher) Monitor: 1024 x 768 resolution Serial port: RS 232 Ethernet port: 10M/100MPage 16

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

T2000 Web LCT Installation GuidePre-installation (continued)

Software requirements

Windows XP Professional SP2/Windows 2003 Server Standard SP1

Internet Explorer 6.0 or better Tomcat 5.0 JDK1.4.2 Servlet 2.3

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 17

T2000 Web LCT Installation Guide

Prerequisite: Windows XP Professional SP2 or Windows 2003 Server standard SP1 must be installed. Procedure

Step 1 Uncompress the installation package or Insert the installation CD, and run the setup.exe file. Click Next.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 18

T2000 Web LCT Installation Guide

Step 2 Select I accept the terms of the license agreement and click Next.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 19

T2000 Web LCT Installation Guide

Step 3 Enter your user name, company name, and serial number Click Next.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 20

T2000 Web LCT Installation Guide

Step 4 Click Next.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 21

T2000 Web LCT Installation Guide

Step 5 Click Install and the Setup Status dialog box is displayed. After the T2000 Web LCT is installed, the Installation Complete dialog box is displayed.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 22

T2000 Web LCT Installation Guide

Step 6 Click Finish.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 23

T2000 Web LCT Installation GuideChecking the Installation After you install the T2000 Web LCT, you need to check the correctness of installation. Check directories and files as follows:

The T2000 Web LCT installation directory.

By default is C:\Web_LCT.

The installation directory of the jre software.

By default is C:\Web_LCT\jre. By default is C:\Web_LCT\Tomcat .

The installation directory of the Tomcat software.

Check the shortcut icon on desktop. The iManager T2000 Web LCT group is created in the Windows Program bar.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 24

Contents

Introduction to the T2000 Web LCT

2.1 Main Characteristics 2.2 Application Scenario 2.3 Installation Guide 2.4 Connecting to NEs 2.5 Configuration Operations

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 25

T2000 Web LCT Connecting to NEscable or a serial port.

To use the T2000 Web LCT to configure and manage NEs, you need to connect the T2000 Web LCT to NEs with an Ethernet

Procedure

By using a network cable 1. Connect a network cable to the computer where the T2000 Web LCT resides. 2. Route the network cable to the equipment side and connect the RJ-45 connector of the network cable to the network management interface on the front panel of the equipment.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 26

T2000 Web LCT Connecting to NEs

Procedure (continued)

By using DCN 1. Use a network cable to connect the computer where the T2000 Web LCT resides to the DCN. 2. Connect one end of another network cable to the network management interface on the front panel of the equipment. Connect another end to the DCN.

By using an RS 232 serial port cable 1. Connect the serial port cable to the computer where the T2000 Web LCT resides. 2. Route the serial port cable to the equipment side. Connect the RS 232 connector of the serial port cable to the RS 232 interface on the front panel of the equipment.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 27

Contents

Introduction to the T2000 Web LCT

2.1 Main Characteristics 2.2 Application Scenario 2.3 Installation Guide 2.4 Connecting to NEs 2.5 Configuration Operations

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 28

Contents

Configuration Operations

2.5.1 Logging In to an NE 2.5.2 Modifying the NE ID 2.5.3 Configuring IF Protection 2.5.4 Setting IF Attributes 2.5.5 Setting RF Attributes 2.5.7 Configuring Service 2.5.7 Configuring SNCP Service 2.5.8 Converting service 2.5.9 Alarm 2.5.10 Performance 2.5.11 Communications and Security

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 29

Web LCT Configuration Logging In to an NEStep1 Double-click the T2000 Web LCT shortcut icon on the desktop to launch the T2000 Web LCT. Step2 The User Login screen is displayed. Enter the user name and password. Click Login.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 30

Web LCT Configuration Logging In to an NECreate an NE in one of the following two ways. 1. Click NE Search and specify the search criteria. Select the NE to be added to create a new NE.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 31

Web LCT Configuration Logging In to an NE2. Create an NE directly. Click the Add NE and Enter the information of the NE and create the NE.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 32

Web LCT Configuration Logging In to an NE

Step 4: In the NE List, select the target NE and click NE Login.Then, the IE displays the NE Login dialog box.

Step 5:Enter the User Name and the Password. Then, click OK.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 33

Web LCT Configuration Modifying the NE IDStep 1 In the NE Explorer, choose Configuration > NE Attribute from the Function Tree. Click Modify NE ID.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 34

Web LCT Configuration Modifying the NE IDStep 2 Enter a new ID and click OK.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 35

Web LCT Configuration Modifying the NE IDStep 3 In the NE list, delete the original NE. Create a new NE with the new ID.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 36

Web LCT Configuration Configuring IF Protection

The supported IF protection is 1+1 HSB, 1+1 SD, and 1+1 FD.Create

IF protection

Step 1 In the NE Explorer, choose Configuration > IF 1+1 Protection from the Function Tree.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 37

Web LCT Configuration Configuring IF ProtectionStep 2 Click New and enter the information of the IF protection. Click OK or Apply.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 38

Web LCT Configuration Configuring IF Protection

Perform IF protection external switching. The priorities of external switching commands are as follows: clear, lockout, force, and manual.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 39

Web LCT Configuration Setting IF Attributes

You can set the following IF attributes by using the T2000 Web LCT: working mode, link ID, IF port loopback, 2 Mbit/s wayside service, and ATPC-related information. In the NE Explorer, select an IF board and choose IF Interface from the Function Tree.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 40

Web LCT Configuration Setting IF Attributes You can enable automatic transmit power control (ATPC), and adjust the threshold and the ATPC adjustment.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 41

Web LCT Configuration Setting RF Attributes

By using the T2000 Web LCT, you can query and configure the following RF attributes: transmit frequency, T/R spacing, transmitted power, ODU manufacturer information, RF loopback status, and ODU status. Frequency attributes

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 42

Web LCT Configuration Setting RF AttributesPower attributes

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 43

Web LCT Configuration Setting RF AttributesODU manufacturer information

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 44

Web LCT Configuration Setting RF AttributesIn the Advanced Attributes tab, you set RF loopback and ODU status.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 45

Web LCT Configuration Configuring a Service This operation is applicable to VC4, VC3, and VC12

services. Procedure

Step 1 In the NE Explorer, Configuration -> CrossConnection Configuration from the Function Tree.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 46

Web LCT Configuration Configuring a Service

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 47

Web LCT Configuration Configuring a ServiceStep 2 Click New, enter the information of a service and click OK or Apply.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 48

Web LCT Configuration Configuring an SNCP Service This operation is applicable to VC12, VC3, and VC4 SNCP services. Procedure

Step 1 In the Cross-Connection Configuration window, click Create SNCP. Enter the information of an SNCP service.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 49

Web LCT Configuration Configuring an SNCP ServiceStep 2 After you create an SNCP service, the window is divided into two panes. The upper pane displays the working service and the lower pane displays the protection service. You can perform external switching for the working and protection services.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 50

Web LCT Configuration Converting a Service

The T2000 Web LCT supports the conversion between a normal service and an SNCP service.

To convert a normal service to an SNCP service, select a normal service, right-click and choose Convert to SNCP from the shortcut menu. Enter the source of the service in the protection channel and click OK.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 51

Web LCT Configuration Converting a Service

You can convert the working or protection channel of an SNCP service to a normal service.

To convert a working channel, right-click the service in the working channel and choose SNCP Working Service Change to Normal Service from the shortcut menu.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 52

Web LCT Configuration Converting a Service

To convert a protection channel, right-click the service in the protection channel and choose SNCP Protection Service Change to Normal Service from the shortcut menu.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 53

Web LCT Configuration Alarm

By using the T2000 Web LCT, you can view the current and history alarms, the reporting status of alarms for an NE and boards, and abnormal events.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 54

Web LCT Configuration Performanceperformance monitoring intervals.

The T2000 Web LCT supports 15-minute and 24-hour

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 55

Web LCT Configuration Performance

You can view the current and history performance data, UAT events, threshold crossings, and performance monitoring status. You can set the performance threshold and reset a board registry.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 56

Web LCT Configuration Communications

The RTN 600 uses the OSP NE platform. You can set multiple protocol stacks, including the OSI, IP, and HWECC.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 57

Web LCT Configuration Communications

For DCC management, an IF board supports the configuration of different DCC rates in different working modes.

When the working mode is PDH, the configuration of onebyte DCC (D1-D1) rate is supported. When the working mode is SDH, the configuration of D1-D3, D4-D12, D1-D12, and D1-D1 is supported.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 58

Contents1. Introduction to Management Systems 2. Introduction to T2000 Web LCT 3. Introduction to T2000

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 59

Contents

Introduction to T2000

3.1 Main Characteristics 3.2 Application Scenario 3.3 Configuration Operations

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 60

T2000 Main Characteristics

The T2000 consists of server and client. The server is developed based on C++ and the client is based on Java. The T2000 manages a maximum of 1000 equivalent NEs and supports concurrent operations of 32 clients.T2000 server T2000 client T2000 client

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 61

T2000 Main Characteristics

Modular architecture Open and integrated High efficiency and reliability

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 62

Contents Introduction

to T2000

3.1 Main Characteristics 3.2 Application Scenario 3.3 Configuration Operations

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 63

T2000 Application Scenario

Subnet management system (SNMS) Applicable to small and medium network management

Provides power NE management functions Uniformly manage the RTN/SDH/ASON/MSTP/WDM equipment

Provides the standard northbound interfaces and supports OSS integration

iManager T2000

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 64

Contents

Introduction to T2000

3.1 Main Characteristics 3.2 Application Scenario 3.3 Configuration Operations

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 65

Contents

Configuration Operations

3.3.1 Microwave link 3.3.2 Alarm 3.3.3 Performance 3.3. 4 Linear MSP

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 66

T2000 Configuration Creating a Microwave Link

The T2000 allows you to create a Microwave link. You can view the networking on the Main Topology. Step 1 On the Main Topology, right-click and choose Microwave link from the shortcut menu. Enter the information of the Microwave link.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 67

T2000 Configuration Creating a Microwave Link

Alternatively, click the icon on the toolbar to display the Create Link window.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 68

T2000 Configuration Creating a Microwave LinkStep 2 Click OK or Apply. The link is displayed as follows:

n the source and the sink have different working modes, the link status is abnormCopyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 69

Current Alarm Statistics

An NE reports current alarms to the T2000. You can filter alarms according to the report time of alarms. You can view alarm statistics in each NE.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 70

Customizing Alarm Attributes

You can customize alarm functions, such as alarm severity, alarm suppression, and alarm reporting. The T2000 supports a maximum of 16 alarm templates.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 71

Alarm Correlation Analysis and SuppressionA number of NE alarms Alarm analysis rule Root alarm

Characteristics: Retain the root alarms. Suppress the non-root alarms. Customize the analysis rules.

Suppress nonroot alarms

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 72

Customizing Performance ThresholdThe T2000 supports customization of a maximum of 16 performance thresholds.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 73

History Performance Analysis

The T2000 provides graphic history performance data analysis.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 74

T2000 Configuration

The T2000 and T2000 Web LCT are the same in terms of service configuration, IF protection, IF and RF attributes, and communications. Refer to the description in the T2000 Web LCT part.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.

Page 75

Thank Youwww.huawei.comwww.huawei.com

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.