Optimization Overview and Moshell Commands_tp

Optimization:
overview
&
moshell commands

Initial audit

Parameter Audit.
Cell classification set according to FGA.maximumTransmissionPower aligned with maxDlPowerCapabilityFemto (6/cell) defined for all cells with qoffset = -10. Load sharing enabled for F1F2 co-located & non OBIF.Irat neighbor defined for irat cells & ifho neighbor defined for ifho preferred cells.
Alarms/transport issues.
No major alarm, T1 errors, RSSI issues & VSWR should be present.All cells should be operational.

WNCS
Schedule WNCS initially for 2 hrs to find the missing neighbor drops.Then schedule it as required, can be on weekly basis if there are no missing neighbor drops are pegged. Using OSS->RNO.Remember to click Custom Post Processing when scheduling new recording. So we can analyze part of recording while its still on.

Time line
Cluster: 30 daysSSV: 5 days.Depending on the market & performance.List of some task to be checked/verified:

Moshell basics

MoShell is a text-based O&M client & can provide following services:

Configuration service (CS)

Alarm service (AS)

Performance management service (PM)

Log service (LS)

OSE shell (COLI)

File transfer (ftp/http)

Configuration Service

Moshell supports the following 6 operations from the configuration service:

1. GetChildren to load all or parts of the MO-tree

2. GetAttribute to read the attributes of an MO

3. CallAction to perform an action on an MO

4. SetAttribute to set (change) the value of an MO attribute

5. CreateMO to create a new MO in the node

6. DeleteMO to delete an MO from the node

Alarm Service

Command to get active alarms on site with the command:

al (to show an overview) or ala (Al + more details).

Performance Management Service

Moshell supports the following operations from the performance management service:

List Scanners and Event Filters

Create Scanner

Stop Scanner

Resume Scanner

Delete Scanner

Set Event Filter

Log service

Moshell supports fetching and parsing of the following logs:

availability log

system log

event log

alarm log

command log

O&M security event log

COLI log

Hardware inventory log

JVM events log (upgrade log)

OSE shell

Any OSE shell command can be typed at the moshell prompt and the output can be piped

through external utilities (which exist in your workstate/server) if required.

Examples:

te log read

te log read | grep ERROR

File transfer

Moshell can download/upload files and directories to/from the node, using http, ftp or sftp.

Managed Object Model (MOM)

MOM is a reference document describing all the MO Classes that can exist in a node,, together with their attributes and actions.

Mom utrancell -> to know the info/value associated with utrancell

Piping

Some commands in moshell support piping,

e.g. All OSE shell commands, lh, tg, str, etc.

This is usually indicated in the menu and the help for that command.

Some examples are:

te log read | grep ERROR

help

o show the help and list of commands. Can be used with a command name after to

show help about that command.

H

to display lga output with keyword filtered.

Lga | grep

to filter out with particular date range

lga -s 20110401 -e 20110402

-A = aggregate

-S = Start date Format: yyyymmdd[.hhmm]

-E = End date

-m = Number of hours - time Backward

-p = Number of hours - time forward

commands - Site level

Moshell

Lt all -> to load all Mos

* Password should rbs^^^^ or rbc, where ^^^^ is last 4 digit of Site name.

RNC for

NO. of MOs

Altk -> current alarms on site.

Lga -> all alarms.

LgG/Llog/lgds -> Restart log (restart type /history)

Lgv -> Event Log for site, site down & recovered.

Lge -> Event Log

Lgo -> recent activity on site

LgS -> Board info/crash

Above command can be combined with the following command:

Lgsavemog

te log read | grep ERROR -> errors

Severity - Critical, Major, Warning

get iub -> atm or ip site with iub id

get . fQ -> Frequency

get . channel -> Channel element

get antenna -> antenna details/freq

get feeder -> delay/attn

lh ru fui get vswr -> VSWR {>20dB ~ Good | 17 20 ~ OK | Max DL. Pwr

pmx . pmPropagationDelay -m 1 -a -> propagation delay for 1 hr

Pget t1 -> Current T1 errors

pmx -m 2 t1 s -a -> T1 errors for 2 hrs

st t1 -> T1 status

st ima -> IMA status

lst iub -> iub status

IP or atm site.

Iub id = b(rbsid), eg b1173

get radiolink noof

pget DownlinkBaseBandPool noofradiolinks

lst aal -> Aal2 (for congestion)

lga | grep -i T1phy -> T1 alarm, on and off time for alarm

get externalTMA

No of active radio links/sector.

Tower Mounted Amplifier details/sector

RL per different SF

st tx -> TX board status

st rax -> Rax board status

Cabx -> H/W status

Operational Indicators on boards

pmr -m 0.25 -> Choose the parameter # of interest. (for -m hours)

1) Carrier Average Rssi and Transmitted Power

2) Carrier Prach Total

3) Carrier Prach per rop

4) Downlink RadioLink Setup Success Rate

5) Uplink RadioLink Setup Success Rate

6) HSPA Throughput

7) HSDPA Congestion

8) HSDPA CQI total

9) HSDPA CQI rop by rop

10) HsDschResources AckNack rop by rop

11) HSDPA Measurements IubDataStreams

12) HSDPA Frame problems

13) HSDPA Usage rop by rop

14) HSDPA Codes rop by rop

15) HSDPA Power rop by rop

16) HSDPA Throughput per SPIxx

17) HSDPA Throughput per SPIxx-PQ

18) HSDPA Iub Flow Control

19) Total EUL Throughput and Efficency Factors

20) EUL Throughput and Efficency Factors rop by rop

21) Total EUL stuff

22) EUL stuff rop by rop

23) Total IBHOs and rejects

24) IBHOs and rejects rop by rop

25) Total UplinkBaseBandPool SetupFailures

26) Total UplinkBaseBandPool SetupFailures rop by rop

27) Total DownlinkBaseBandPool Allocation Rejects

28) DownlinkBaseBandPool Allocation Rejects rop by rop

29) Total DownlinkBaseBandPool RlSetupAttempts

30) DownlinkBaseBandPool RlSetupAttempts rop by rop

31) Total DownlinkBaseBandPool RlSetupFailures

32) DownlinkBaseBandPool RlSetupFailures rop by rop

33) Total DownlinkBaseBandPool RlAdditionFailures

34) DownlinkBaseBandPool RlAdditionFailures rop by rop

35) DownlinkBaseBandPool Avg CE usage

36) UplinkBaseBandPool Avg CE usage

X to exit

Commands - RNC level

Moshell

Lt all -> to load all Mos

altk -> active RNC alarm

Lga -> RNC alarm

Lga | Grep TNCRU1173

Lg0 -s 20110601 -e 20110605

lgo -s 20110601 -e 20110605 | grep TNCRU1241

LgU -s 20110601 -e 20110605

lgo |grep

* Password should rnc^^ or rnc, where ^^ is last 2 digit of RNC name.

Alarms for RNC Filtered for particular site.

-> activity for particular date - start/end -> with particular site -> updates on sites

-> activity on RNC with siteid filtered

Cvls -> cv version on RNC

get TNKNU6131 admin|cellreserve|operation -> status per sector

st utrancell -> state of the site/cell with value filtered from RNC

Value = enabled / disabled

Cells disabled in particular rnc.

lst TNKNU6131 -> status of individual channel

lgsavemo |grep -> combined.

Different channel

get TNCRU1173A maximumTransmissionPower|cpich| minpwrRL|minpwrmax

eget TNCRU1173A

RF power parameters. using piping.

get TNCRU1173A frequencyrelation

lget TNCRU1173A frequencyrelation

0 - Intra freq relations

1 - Inter freq relations

GSM Neighbor.

lget TNCRU1173A gsmrelationid

Neighbor count intra-inter-irat

Some more.

get TNCRU1173A scr ->Scrambling code

get TNCRU1173A cid| rbsid -> cell id

get TNCRU1173A arfcn -> UL/DL ARFCN

get . gsmThresh3a

get . hysteresis

Pmx -m 2 aal2ap=b1173 pmUnSuccOutConnsRemoteQosClass

Getting Iub congestion 2 hours

pmxh TNCRU1173

pmxh TNCRU1173 pmNoNormalRabReleaseSpeech

Information on particular counter:

Mom utrancell

pmxh TNCRU1173 pmNosysRelSpeech|pmnoofterm

Combined using pipe |

Events

Gold Parameters

Documents

Optimization Overview and Moshell Commands_tp