51
333P TURBOMIXER PRINTED FEBRUARY 1973 REPRINTED JUNE 2003 OPERATION, MAINTENANCE & SPARE PARTS WINGET LIMITED PO BOX 41 EDGEFOLD INDUSTRIAL ESTATE PLODDER LANE BOLTON LANCS BL4 OLS TEL: ++ 44 (0) 1204 854650 FAX: ++ 44 (0) 1204 854663 [email protected] [email protected] www.winget.co.uk

OPERATION, MAINTENANCE & SPARE PARTS - Winget AND OPERATORS MANUAL...Mxer sizes 1000P2 to 2000P2 These are protected by an Interlock system as indi— e.ted on the Flow Diagram 50—674060

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

333P TURBOMIXER

PRINTED FEBRUARY 1973 REPRINTED JUNE 2003

OPERATION, MAINTENANCE

& SPARE PARTS

WINGET LIMITEDPO BOX 41

EDGEFOLD INDUSTRIAL ESTATEPLODDER LANE

BOLTONLANCS

BL4 OLSTEL: ++ 44 (0) 1204 854650FAX: ++ 44 (0) 1204 854663

[email protected]@winget.co.ukwww.winget.co.uk

This manual is a reprint of the Winget publication No S79 last printedduring February 1973 and is a direct copy of one of the remaining originalmanuals.

Winget Limited have always operated a policy of continuous productdevelopment. Therefore, some illustrations or text within this publicationmay differ from your machine. The contents of this manual, althoughcorrect at the time of publication in February 1973, may have been subjectto alteration by the manufacturers in the intervening years without noticeand Winget Limited can accept no responsibility for any errors oromissions contained within the following pages. Nor can we accept anyliability whatsoever arising from the use of this manual howsoever caused.

TURBOMIXER

333P

SparesPlease note that a number of components are described as being c/w screws,nuts and washers, this is no longer the case and all fixings should be orderedseparately if required. Imperial fixings may no longer be available and thenearest metric equivalent will be supplied.