OPERATING MANUALaz685612.vo.msecnd.net/.../RTI_MY09_en-GB_tp10357.pdf · RTI is a traffic information and navigation system developed by Volvo. The system navigates to a specified

7

VOLVO S60

RoAD AND TRAFFIC INFORMATION SYSTEM (rti)

Volvo Car Corporation TP 103 ( ), AT 0820, Printed in Sweden, Göteborg 2008, Copyright © 2000-2008 Volvo Car CorporationEnglish

OPERATING MANUAL

1

Road and Traffic InformationRTI is a traffic information and navigation system developed by Volvo. The system navigates to a specified destination and gives access to traffic information along the route. The system informs on situations that can complicate the journey and provides the opportunity to select a better route.It is possible to set an itinerary, search for facilities along the route, store a special location etc. The system indicates the car’s current position and can always make its way to the destination in the event of wrong-turns.The RTI system contributes towards an improved environment by facil-itating arrival.

RTI.book Page 1 Tuesday, February 26, 2008 1:29 PM

2

END USER LICENSE AGREEMENTYou have acquired a device (ROAD & TRAFFIC INFORMATION SYSTEM) which includes software licensed by Volvo Car Corporation from one or more software licensors. Such software products, as well as associated media, printed materials, and “online” or electronic documentation (NAVIGATION SOFTWARE) are protected by international intel-lectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT VOLVO CAR CORPORATION FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFI-CATION OF ANY PREVIOUS CONSENT).

GRANT OF SOFTWARE ARE LICENSE. This EULA grants you the following license:You may use the SOFTWARE only on the DEVICE.Connectivity Software. Your Device package may include desktop connectivity software contained on a CD-ROM disk. You may install and use the component(s) of the software contained on the CD-ROM disk on a computer or computing device with which you exchange information with the Device, in accordance with the terms of the end user license agreement provided with such component(s). If no separate end user license agreement is provided, you may install and use only one (1) copy of such component(s) on a single computer or computing device with which you use the Device.

NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. VOLVO CAR CORPO-RATION HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED UPON VOLVO CAR CORPORATION TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided “AS IS” and with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS.No Liability for Certain Damages. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFO-MANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U. S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00-).Limitations on Reverse Engineering, Decompi-lation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.

SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS. You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE.EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regula-tions, as well as end-user, end-use and destination restrictions issued by U. S. and other governments. For additional information see http://www.microsoft.com/exporting/.

The specifications, design details and illustra-tions in the Owner’s Manual are not binding. We reserve the right to make alterations without prior notification.© Volvo Car Corporation


3

Contents

Introduction 5Menu structure 13Destination 21Itinerary and guidance 37Map 43Traffic information 49Navigation settings 57Symbols on the map 61TV reception (option) 65Questions and answers 69Alphabetical index 73


4


5

Introduction

Overview 6DVD disc/DVD player 8Navigator (keypad) and remote control 9Before starting 10Quick start 11Map image 12


6

Introduction

Overview


7

Introduction

1. Main unit with map disc and TMC receiverThe main unit which is only designed for Volvo map discs, is located in the cargo compartment.The main unit includes the following functions:

• Calculating the car’s position.• Route calculation to specified desti-

nation and decoding traffic messages.• Voice guidance.

The map information does not always corre-spond with the real situation. (Volvo is not responsible for the accuracy of the map material or the TMC information.)TMC (Traffic Message Channel) is a stand-ardised coding system for traffic information. The TMC receiver searches for the relevant frequency. The transmission takes place via FM frequencies.

2. GPS antennaThe car’s speed sensor and a gyro calculate the current position and the direction of travel of the car using signals from the GPS satellite system.

3. Navigator (keypad)Different menu options can be scrolled and selected using the navigator.

4. ScreenThe screen displays maps and provides detailed information on route options, distance etc.The IR receiver for the remote control is located in the top of the screen frame.

5. RadioThe radio is used to provide voice messages via the driver door loudspeaker and to control the TV.

6. TV receiverThe TV receiver is optional.


8

Introduction

DVD disc

Contents of the DVD discEach map disc contains the same European road network. Detailed information such as addresses, facilities etc. is divided into the relevant map disc for the geographic area.A message on the screen indicates when a disc should be changed. If the disc is not changed then the road network will still be available, but not detailed information such as petrol stations, restaurant facilities etc.Map discs with additional information are issued continuously. Contact a Volvo dealer for the latest issue.See also www.volvocars.com/navi for further information on maps etc.

WARNING!

For the sake of traffic safety, the greatest care must be taken with continuous attention paid to prevailing traffic condi-tions when using the RTI system whilst driving. Always comply with traffic regula-tions in force.

DVD player

Changing a DVD/upgradingThe DVD player is located in the cargo compartment, see overview.

1. Press the eject button and pull down the cover to remove the DVD (the ignition must be on)

2. Load the new DVD.If the DVD contains new software then the screen will become black and the text: Loading new program - please wait is displayed in the lower edge of the screen. The entire procedure can take up to five minutes. Once programming is complete, the start screen is displayed.

Care of the DVD discBe careful when handling DVDs. Make sure that they are not exposed to dirt or damp.When the discs are not being used they must be stored in their packaging. Avoid storing them in strong heat, direct sunlight or in dusty surroundings.

Care of the screenClean the screen with a soft, lintless, lightly dampened cloth, or a cloth with a mild window cleaning agent.

DVD disc/DVD player


9

Introduction

The navigator’s location on the steering wheel.

A. NavigatorPress UP, DOWN, RIGHT or LEFT to choose between the different menu options, traffic messages etc.B. BACKPress BACK to return to the previous menu or to undo a choice.C. ENTERPress ENTER to confirm options or to activate different menus.NOTE! The remote control has the same functions as the keypad.

Navigator (keypad) and remote control

Navigator

Remote control

IR receiver(Infrared Receiver)Always direct the remote control towards the screen. (The IR eye is located uppermost in the screen frame.)

AC B

NOTE! The remote control contains AAA or R03 batteries. If the remote control ceases to function, try changing the batteries first.


10

Introduction

OnThe ignition key must be in position I or II. Press on one of the buttons on the remote control or the steering wheel keypad. The system may need several seconds to sense the car’s position when you have turned on the ignition.

OffScroll the navigator to [Shut down] and press ENTER.NOTE! The system is also accessible when the engine is switched off. Remember to turn the ignition key to position 0 when the system is not being used as the battery can otherwise discharge.

Basic functionsNavigator - Moving up, down, right or left between different menu options.ENTER - Confirms or activates options.BACK - Return to menu structure or to undo a choice.

SettingsEach settings menu for System, Screen, Route options and Traffic information is reached under Navigation settings.

Before starting

DemoThe demo demonstrates the system (when the car is stationary) by simulating a journey to a specified destination. The navigation is demonstrated on the screen, see page 60.

Manual structureThe manual is divided into chapters/functions. At the end of the manual is an alphabetical register, before which is a page of usual questions and answers.The manual outlines the use of the keypad in the steering wheel, but the remote control can be used instead as it has the same functions.

Search pathMenu options are outlined in the manual in brackets, i.e. [Destination]. Menus are outlined without brackets, i.e. Main menu.The search path with menus and successive menu options is outlined as i. e.Main menu [Settings] [System].


11

Introduction

OnThe ignition key must be in position I or II. Press on one of the buttons on the remote control or the steering wheel keypad. The system may need several seconds to sense the car’s position and motion when you have turned on the ignition.

OffScroll the navigator to [Shut down] and press ENTER.NOTE! The system is also accessible when the engine is switched off. Remember to turn the ignition key to position 0 when the system is not being used as the battery can otherwise discharge.

Basic functionsNavigator - Moving up, down, right or left between different menu options.ENTER - Confirms or activates options.BACK - Return to menu structure or to undo a choice.

NOTE! The remote control has the same functions as the keypad.

Quick startGuidance to street address

1. Start from main menu. Select Destination and press ENTER.

2. Select Street address and press ENTER.

3. Scroll the navigator to the required letters to specify the country and city for the street address.

4. If the selected address has a street number then this can also be stated to obtain a more precise navigation. Instead of street number, a junction (crossroads) can be specified.

5. Select Start guidance and press ENTER.In a few seconds the system calculates the route and distance to the destination entered.The system guides to the specified desti-nation and provides voice messages on route options and junctions.For smaller localities there are no street addresses stored in the system. The centre of the locality should always be selected as the destination.

Guidance to facility

1. Start from main menu. Select Desti-nation. Press ENTER.

2. Select Facilities and press ENTER. Select Facilities in the submenu and press ENTER.

3. Scroll the navigator to the required letters to specify the country and city for the facility. Press ENTER.

4. Choose type of facility, such as petrol station, restaurant or Volvo Dealer. Scroll DOWN to the list. Select facility type with UP or DOWN and press ENTER.

5. Scroll DOWN to the list. Select facility name using UP or DOWN and press ENTER.

6. Select Start guidance and press ENTER.In a few seconds the system calculates the route and distance to the destination entered.The system guides to the specified facility and gives voice messages on route options and junctions.


12

Introduction

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

Map image1. Next guidance

2. Distance to and name of next road/street along the route.

3. Road sign information

4. Position of the car

5. Next guidance point

6. Route

7. Intermediate destination

8. Destination

9. Remaining travel time and distance to destination

10. Map scale

11. Present position

12. Stored location

13. Starting point

14. Symbol for Volvo Dealer

15. Symbol for TMC (traffic message)

16. Symbol for city centre

17. Compass indicates the orientation of the map

18. Destination bearing

Road typesMotorway - greenMain road - redSmaller main road - brownNormal road - dark greyLocal road - dark green

CompassThe red tip of the compass needle points to north on the map and the white tip points to south. The destination arrow in the outer ring of the compass points in the direction of the destination.Under the Screen option in the Settings menu the compass and destination arrow can be set at show/hide.


13

Menu structure

Start/shut down the system 14Help texts 14Main menu 15Main menu with icons 15Destination menu 16Map scale 16Map scroll 17Guidance 17Map menu 18Diversion menu 18Settings menu 19


14

Menu structure

[Shut down]

Start/shut down the systemStarting the system: Turn the ignition key to position I or II, then press ENTER, BACK or the navigator.Shut down the system: Select Shut down from the main menu and press ENTER.If the system is in operation when the car’s ignition is switched off, it restarts when the ignition is turned on. If the system is shut down when the car’s ignition is switched off then it will remain shut down when the ignition is turned on.

[Settings] [Help]

Help textsThe help texts give abbreviated information about the functions. A choice can be made between Long, Short or None for help text. Scroll RIGHT or LEFT to the required option and press ENTER.The white help text panel is displayed when an option is selected but then disappears automatically after a few seconds.


15

Menu structure

[Destination]

Main menuThe main menu and the different submenus provide access to the functions of the system. Return to the main menu can always be made, irrespective of which screen image is displayed, by pressing BACK one or more times. The main menu is displayed for several seconds and then disappears automatically if a menu option is not selected.

[Settings] [Screen] [First menu] [Text/icons]

Main menu with iconsThe main menu can be displayed with a choice of icons or text.


16

Menu structure

[Destination] [Street address]

Destination menuThere are several search options in the destination menu for speci-fying the destination. Select the option in the menu using UP or DOWN and press ENTER. Press BACK to return to the main menu.Read more on the different types of destination and search paths on page 22.

[Map scale]

Map scaleScroll UP or DOWN using the navigator to change the map’s scale of an area, see page 44. Confirm with ENTER.


17

Menu structure

[Map scroll]

Map scrollUsing the navigator the hairline cross moves freely on the map for indicating a destination for example, see page 33. Displayed on the lower part of the map is the name of the address the hairline cross rests on.

[Guidance]

GuidanceSelect Guidance from the main menu to repeat voice guidance, see page 39.


18

Menu structure

[Map]

Map menuIn the map menu there is the choice between displaying one or two maps for example or between displaying the map in the Heading up or with North up. See also the chapter Map.

[Diversion]

Diversion menuFrom the diversion menu it is possible to avoid sections of the calculated route, such as roadworks. The system then calculates an alternative route, see page 42.


19

Menu structure

[Settings]

Settings menuThe settings menu provides access to the system’s different settings, see page 58.


20

Menu structure


21

Destination

Set destination 22Search by phrase 27Facilities 29Facility types 30Destination on the map 33Last ten destinations 34Return trip 34Store a location 35Stored locations 36


22

Destination

[Destination]

Set destination

Specify an address as destinationSelect Destination using UP or DOWN and press ENTER to obtain the destination types menu.If a destination is already specified, then the menu with destination types is obtained, as per the following search path: [Destination] [Add to itinerary]


Destination typesSelect Street address using UP or DOWN and press ENTER.Street address: Specify a destination by entering letters.Facilities: Specify a facility as destination. Choose a hotel or a restaurant, see page 29.Stored locations: Choose a saved location as destination, see page 35.Last ten destinations: Select one of the last specified destinations, see page 34.Set dest. on map: Specify a location as a destination directly from the map, see page 33.Return trip: Choose the location where the last choice was made Start guidance, see page 34.Search by phrase: Search by part of a street address or facility, see page 27.


23

Destination

[Destination] [Street address] [Country]

Specify country/city for destinationCountry and City are preset and correspond to the position of the last destination entered.Scroll to Country or City using UP or DOWN and press ENTER. Choose country and city by entering letters or scrolling DOWN and choosing directly from the menu list.The scrolling list on the right-hand side indicates that there are more options in the list. The figure gives the number of options.

[Destination] [Street address] [City]

Specify country/city or select from the listSelect letters using the navigator and press ENTER. (When there are no further options the system fills in the remaining letters itself).Displayed on the lower part is a list of the first three countries/cities matching the letters entered. The scrolling list on the right-hand side indicates that there are more options in the list. Scroll DOWN and choose directly from the menu list. Select using UP or DOWN and press ENTER.Return to the character chart using BACK. Delete the letters entered one at a time by pressing BACK.The definition of what a city or area involves can vary from country to country, and also within the same country. In some cases a metro-politan area is indicated, and in others an individual suburb.


24

Destination


Specify a street address for the destinationSelect letters using the navigator and press ENTER.There is also the option to search street addresses in the whole country without specifying a particular city. Scroll UP to City and press ENTER. Then scroll to Street and press ENTER. Enter a street name.For smaller localities there are no street addresses stored in the system. The centre of the locality should always be selected as the destination.The scrolling list on the right-hand side indicates that there are more options in the list. The figure gives the number of options.Return to the character chart using BACK. Delete the letters entered one at a time by pressing BACK.

[Destination] [Street address] [Street]

Choose the street address from the listDisplayed on the lower part is a list of the first three addresses matching the letters entered. The scrolling list on the right-hand side indicates that there are more options in the list.Choose between the addresses found by scrolling DOWN to the list. Select address using UP or DOWN and press ENTER.Return to the character chart using BACK.


25

Destination

[Destination] [Street address] [Number]

Specify street number or junctionIf the selected address has a street number then this can also be stated to obtain a more precise navigation. Instead of street number, a junction (crossroads) can be specified. Scroll to the line for Number or Junction and press ENTER.It is also possible to scroll directly DOWN to Start guidance and press ENTER.

[Destination] [Street address] [Number]

Specify street numberScroll to Number and press ENTER. The existing street number is displayed on the figures line. Select figures using RIGHT or LEFT and press ENTER.Return to the character chart using BACK.


26

Destination

[Destination] [Street address] [Junction]

Select junctionScroll DOWN to Junction and press ENTER. The roads which intersect the street chosen are displayed in a list. Select from the streets using UP or DOWN and press ENTER.

[Destination] [Street address] [Junction] [Start guidance]

Start guidanceIf neither the street number nor the crossroads is specified the system guides to the middle of the street chosen.Start guidance: Starts guidance to the destination.Add to itinerary: Puts the address in the itinerary and provides the option to enter further destinations.Information: Gives details of the destination.


27

Destination

[Destination] [Search by phrase]

Search by phrase

Street address/facilitiesSearch by part of a street name or a facility.Select Search by phrase using UP or DOWN and press ENTER.Read more on the different types of destination and search paths on page 22.

[Destination] [Search by phrase] [Street address]

Street addressSelect Street address using UP or DOWN and press ENTER.


28

Destination

[Destination] [Search by phrase] [Street address] [Street]

Start searching by phraseEnter the part of the name you know using the navigator and ENTER. Scroll DOWN to Start searching and press ENTER.

[Destination] [Search by phrase] [Street address] [Street] [Start searching]

Select optionScroll using UP or DOWN to required option and press ENTER. The scrolling list on the right-hand side indicates that there are more options in the list. The figure indicates the number of options. Press BACK to return to the previous screen.


29

Destination

[Destination] [Facilities]

Facilities

Specify a facility as destinationFacilities is a collective name for petrol stations, hotels, restaurants, Volvo Dealers, hospitals, car parks etc.Select Facilities using UP or DOWN and press ENTER to obtain a submenu with different search options.Read more on the different types of destination and search paths on page 22.

[Destination] [Facilities] [Facilities]

Search options for facilitiesSelect Facilities using UP or DOWN and press ENTER.Facilities: Enter the name of a facility, or choose between types of facility from the list in the menu. The list only displays the facilities in the selected city or area.Search around the car: The system searches in a circle of at least 2 km radius. If fewer than 40 facilities are found the radius is increased to a maximum of 100 km.Search along the route: The system searches in a 2 km wide area, approx. 100 km ahead.Search around map point: The system searches in the same way as Search around the car, but around a chosen point on the map.


30

Destination

[Destination] [Facilities] [Facilities] [Type]

Facility types

Specify facility typeSelect letters using the navigator and press ENTER or scroll DOWN and choose a facility type directly from the menu list. Select using UP or DOWN and press ENTER.There is also the option to search by facilities throughout the whole country without specifying a particular city. Scroll UP to City and press ENTER. Scroll to Type or Name and press ENTER. Select letters using the navigator or scroll DOWN and choose a facility directly from the list.Return to the character chart using BACK. Delete the letters entered one at a time by pressing BACK.

[Destination] [Facilities] [Facilities] [Name]

Specify facility nameSelect letters using the navigator and press ENTER or scroll DOWN and choose a facility directly from the menu list.Return to the character chart using BACK. Delete the letters entered one at a time by pressing BACK.


31

Destination


SubcategoriesFor certain facilities (petrol stations, restaurants, hotels and car parks) there are subcategories. Choose a RESTAURANT for example and press ENTER.


Specify categoryThe different subcategories there are for restaurants are displayed in the list.Select letters using the navigator and press ENTER or scroll DOWN and choose a subcategory directly from the menu list. Select ALL TYPES to be able to see all facilities irrespective of category. Choose amongst the options using UP or DOWN and press ENTER.The restaurants included in the category are displayed in the list.Scroll DOWN to the required option and press ENTER.Return to the character chart using BACK.


32

Destination

[Destination] [Facilities] [Facilities] [Start guidance]

Facility and guidanceStart guidance: Starts guidance to the facility.Add to itinerary: Puts the facility in the itinerary and provides the option to enter further destinations.Information: Gives details of the facility.

[Destination] [Facilities] [Facilities] [Information]

Information on the facilityThe address, coordinates and telephone number of the facility are displayed under information. Select Map and press ENTER to view the location of the facility on the map.


33

Destination

[Map scroll]

Destination on the map

Specify destination on the map using the NAVIGATORSelect Map scroll with UP or DOWN and press ENTER.Using the navigator the hairline cross can be moved freely over a large area of detailed scale. The centre point of the hairline cross specifies the location moved onto on the map. Displayed on the lower part of the map is the name of the address the hairline cross rests on.The function can also be obtained via Destination in the main menu. Read more on the different types of destination and search paths on page 22.

[Map scroll]

Map scrolling menuMove the hairline cross using the navigator to the required position on the map and press ENTER to obtain the map scrolling menu. Scroll using UP or DOWN to Set as destination and press ENTER.


34

Destination

[Destination] [Last ten destinations]

Last ten destinations

Entered destinationSelect Last ten destinations and press ENTER to view the last ten destinations. The scrolling list on the right-hand side indicates that there are more options in the list.Select destination using UP or DOWN and press ENTER or RIGHT to obtain the submenu.Add to itinerary: Puts the destination in the itinerary and provides the option to enter further destinations.Information: Gives details of the destination.Delete location: Deletes the destination.Read more on the different types of destination and search paths on page 22.

[Destination] [Last ten destinations]

Return trip

Back to starting pointScroll using UP or DOWN to Return trip and press ENTER. Select Start guidance and press ENTER.The system starts guidance back to the location where Start guidance was last chosen.


35

Destination

[Destination]

Store a location

Save a specified destinationA destination can be stored to save entering the same destination again. Up to one hundred destinations can be stored.Scroll to a destination using UP or DOWN and press ENTER or RIGHT to obtain the submenu. Select Store location using UP or DOWN and press ENTER.A location can also be stored using the function Map scroll, see page 45.

[Destination] [Store location]

Symbols and namesThe stored locations are marked on the map by symbols. Scroll UP to the symbols to select and press ENTER. The name of the stored desti-nation is indicated automatically. The original name can be deleted using BACK and a new name specified.Scroll to Store location using UP or DOWN and press ENTER.


36

Destination

[Destination]

Stored locations

Saved destinationsSelect Stored locations using UP or DOWN and press ENTER. A stored location is a destination saved earlier (place of work, favourite restaurant, rest area, home etc.).Read more on the different types of destination and search paths on page 22.

[Destination] [Stored locations]

Submenu for stored locationsChoose between the stored locations using UP or DOWN and press RIGHT to obtain the submenu.Add to itinerary: Puts the stored location into the itinerary.Information: Gives details of the stored location.Rename: Change icon or name of stored location.Delete location: Deletes a stored location.


37

Itinerary and guidance

Enter an itinerary 38Delete itinerary 39Route calculation 39Intersection 40List 40Arrow navigation 41Voice message 41Diversion/alternative route 42


38


[Destination]

Enter an itinerary

Destination/intermediate destinationEnter an itinerary with several intermediate destinations to avoid speci-fying destination after destination during the journey. Up to seven inter-mediate destinations and one final destination can be specified.Start guidance: Starts guidance to the destination.Add to itinerary: Provides the option to enter further destinations.Route options: Route prioritising options.Clear itinerary: Deletes the itinerary.

[Destination]

Arrange the itineraryScroll using UP or DOWN to required destination and press ENTER or RIGHT to obtain the submenu.Information: Gives details of the destination.Delete: Deletes the destination from the itinerary.Travel order: Change the position in the list of the destination.Adjust on map: Change the destination location on the map.Store location: Store the destination.Select options in the submenu using UP or DOWN and press ENTER.


39


[Destination] [Clear itinerary]

Delete itinerary

Delete entered itinerarySelect Clear itinerary and press ENTER to delete the whole itinerary. Destinations deleted remain in the Last ten destinations, see page 34.

[Destination] [Start guidance]

Route calculation

GuidanceWhen Start guidance is selected, the system starts to calculate the route and distance to the destination (during this time a yellow-orange symbol is displayed at the top of the screen).If the planned route is left during the journey, the system automatically calculates a new route.


40


[Guidance]

Intersection

GuidanceWhen an intersection is approaching, voice guidance is provided in good time on the distance and type of manoeuvre. At the same time a detailed intersection map is displayed. The voice guidance is repeated nearer the intersection.At the top of the map, the name of, and distance to the next exit is displayed. Road sign information is displayed on the line below. When there is a road number and exit number or exit name then these are also displayed. On the lower part of the map the current position is displayed.A requirement for obtaining voice guidance is that this option is selected in system settings, see page 58.

[Map] [Route]

List

GuidanceThe next guidance point is marked in a light blue panel. Below this follows a list of the remaining guidance points. Farthest down the list the destination is displayed. Apart from the road name the distance between the guidance points is displayed along with an arrow which indicates the type of manoeuvre. The guidance points are deleted as they are passed. If there is a deviation from the specified route the system calculates a new route.


41


[Settings] [Screen] [Map] [Show/Hide]

Arrow navigation

GuidanceGuidance can be displayed without a map. The system instead displays an arrow in the direction to be turned.Select Hide using LEFT or RIGHT and press ENTER.

[Guidance]

Voice message

GuidanceSelect Guidance using UP or DOWN and press ENTER to obtain voice guidance. Also select Guidance to repeat a voice guidance message.If the distance to the next guidance point is greater than 50 km, the message: Continue straight ahead, is obtained.Press ENTER to repeat a voice guidance message.The system always gives voice guidance irrespective of which menu is active. A requirement for obtaining voice guidance is that this option is selected in system settings, see page 58.


42


[Diversion]

Diversion/alternative route

Avoid part of the journeySelect Diversion with UP or DOWN and press ENTER.By means of Diversion the system can be asked to calculate an alter-native route to avoid part of the journey. The system starts the calcu-lation from the current position.

[Diversion]

Diversion – submenuSelect the length of the diversion using UP or DOWN and press ENTER.NOTE! The function is only available when a destination is specified.


43

Map

Map scale 44Scale 44Map scroll 45Map menu 47Two maps 47


44

Map

[Map scale]

Map scale

One or two mapsSelect Map scale using UP or DOWN and press ENTER.Choose between different levels, from the most detailed 100 metre scale up to the 100 kilometre scale. The scale is displayed on the lower part of the map.Select scale using UP and DOWN and press ENTER.If a change of scale is required when two maps are displayed on the screen, scroll to the map whose scale is to be changed using RIGHT or LEFT.

[Map scale] [route]

Scale

RouteSelect Route in Map scale using UP or DOWN and press ENTER to view the whole route from start to destination.The thick red line indicates the route.


45

Map

[Map scroll]

Map scroll

Move the hairline cross using the NAVIGATORSelect Map scroll to view an area outside the screen image. Scroll using UP or DOWN and press ENTER.

[Map scroll]

Hairline crossThe hairline cross can be freely moved across the whole of the map in a detailed scale using the navigator. The centre point of the hairline cross specifies the location moved onto on the map. Displayed on the lower part of the map is the name of the location the hairline cross rests on.Move the hairline cross using the navigator to the required location on the map and press ENTER to obtain the map scrolling menu.


46

Map

[Map scroll] Scroll Menu

Map scrolling menuSelect options using UP or DOWN and press ENTERScale: Function to temporarily change the scale. Press BACK to return to the original scale, and to return to the position of the car on the map.Set as destination: Choose location on the map as a destination or intermediate destination.Facilities around: The system searches for facilities around a chosen point on the map. The system searches in a circle of 2 kilometres radius. If fewer than 40 facilities are localised the radius is increased to a maximum of 100 kilometres.Traffic information: Change using the navigator to choose between the traffic messages displayed on the screen, see page 52.

Set for surveillance: Here an area on the map is specified which is then easy to survey, see page 55.Store location: Save a location on the map.


47

Map

[Map]

Map menuSelect in map menuSelect Map using UP or DOWN and press ENTER to obtain the map menu.Route outline: Displays a list of the approaching guidance points.Show destination: Displays a map image around the destination.One map/Two maps: Choose between displaying one or two map images.Heading up/North up: Choose whether north or the direction of travel is to be uppermost on the map.Traffic-info selection: Choose which traffic information is to be displayed on the map image.Facility selections: Choose which facility symbols are to be displayed on the map image.Surveillance map: Displays map image of particular area specified in advance, see page 55.

[Map] [Two maps]

Two mapsDifferent degrees of magnification over an areaScroll to One map/Two maps using UP or DOWN. Select Two maps using RIGHT and press ENTER to obtain two map images.Different degrees of magnification can be selected for each map image of the same area. This can be of benefit for obtaining infor-mation on the immediately surrounding area and a larger area at the same time.The system selects the original map image upon the return to a map image.


48

Map


49

Traffic information

Setting of automatic diversion 50Avoid traffic messages 50Traffic symbols on the map 51Detailed traffic information 52Setting of TMC filter 53Automatic diversion 54Set for surveillance 55Symbols - traffic information 56


50

Traffic information

[Settings] [Traffic information]

Setting of automatic diversion

Alternative route in the event of a traffic problemAuto diversion: Select Yes to obtain the option to choose an alter-native route past any traffic problems.Scroll to Auto diversion using UP or DOWN and select Yes or No using RIGHT or LEFT. Press ENTER to confirm the choice.Traffic-info selection: Choose which traffic information is to be displayed on the map image, see page 53.Traffic-info, manual search & selection: Search and select transmitter station for traffic information.Reset to factory settings: Reset to basic settings.

[Settings] [Route options]

Avoid traffic messages

Avoid roads with traffic disruptionAv. traffic msg.: Select No for the system not to avoid roads with traffic messages (traffic disruption) at route calculation.Select Yes for the system to avoid roads with traffic messages at route calculation.If new traffic messages arise along the route the system can offer automatic diversion (see left-hand column).Scroll to Av. traffic msg. using UP or DOWN and select Yes or No using RIGHT or LEFT. Press ENTER to confirm the selection.Read more on Route options settings on page 59.


51

Traffic information

Map mode

Traffic symbols on the map

Traffic information during the journeyThe system provides traffic information during the journey if such infor-mation is transmitted within the current area. If several traffic messages occur within the same area displayed on the map, then these are marked with symbols. The symbols can be in two colours. Yellow means important information and red means very important information.Change the scale to access traffic information in a larger or smaller area. There is always access to traffic information even if no desti-nation is specified.NOTE! Traffic information is not available in all areas.

Map mode

Read/switch between messagesPress the navigator to scroll between different traffic messages. A red or a yellow frame relates to the current message. Press ENTER to read specified message. Press BACK to be able to scroll between current messages again.


52

Traffic information

Map mode

Detailed traffic information

Read traffic messagePress ENTER to obtain detailed traffic information. The number of messages currently within the map area is indicated on the screen. It also displays detailed information on the traffic problem.The extent of the incident and the distance to it from the current position is indicated at the top. The extent to which the following details are available is also displayed: Duration, limitations to speed, vehicle width, vehicle height, roads affected etc.Scroll between the arrows using RIGHT or LEFT and press ENTER to alternate between available messages.The scale of the map determines how large a quantity of traffic infor-mation there is access to (larger area - more information).

Map mode [Map] [Scale]

Traffic information - scaleScroll to Map using RIGHT or LEFT and press ENTER. Press ENTER again to obtain the map scrolling menu. Select Scale and press ENTER to change scale or zoom into a specific traffic message on the map. Select required scale using UP or DOWN and press ENTER. Press BACK to return to the previous image.


53

Traffic information

[Settings] [Traffic information] [Traffic-info selection]

Setting of TMC filter

Select traffic information symbolsTraffic information which is repeated day after day during a longer period can be deselected, roadworks for example.Scroll using UP or DOWN to Select and press RIGHT.It is also possible to obtain these settings via Map in the main menu.

[Settings] [Traffic information] [Traffic-info selection] [Select]

Use or ignoreChoose which traffic information symbols the system is to display on the map image.Scroll using UP or DOWN to choose between the symbols. Select Use or Ignore using LEFT or RIGHT. Symbols marked with a red cross are not displayed. The scrolling list on the right-hand side indicates that there are more options in the list. Press ENTER to confirm the selections.


54

Traffic information

Map mode

Automatic diversion

Alternative routeWhen a traffic message along the planned route is received there is the option to allow the system to calculate an alternative route.Yes: The system calculates an alternative route which avoids the traffic problem.No: The system guides according to the original route.Map: Displays map scrolling mode. Scroll between different messages.The scrolling list on the right-hand side indicates that there is more information in the list.

Map mode [Yes]

New or old routeIf the system calculated an alternative route the new proposal is displayed in orange and the original in yellow. Information on the length of both routes is displayed along with calculated journey time to the destination. The system announces if there is no alternative route.New: The system selects the new alternative route (orange).Old: The system selects the original route (yellow).Map: Displays the alternative and original routes on the map.


55

Traffic information

[Map scroll] [Map scrolling menu] [Set for surveillance]

Set for surveillance

Survey traffic situationFor quickly checking how the traffic situation appears in an area there is the option to survey a section of the route. For example, a section of the route passed every day where there is a risk for queues forming. Select Map scroll in the main menu to adjust the map to the area to be surveyed. Using the navigator the hairline cross moves over the map.Set the hairline cross above the area to be surveyed and press ENTER to obtain the map scrolling menu. Scroll DOWN to Set for surveillance and press ENTER.

[Map] [Surveillance map]

Show stored surveillance mapSelect Surveillance map in the map menu using UP or DOWN and press ENTER to view the surveyed area with any traffic messages. Press BACK to return to the main menu.


56

Traffic information

Symbols - traffic information

EscalationSome traffic messages transmitted also contain information on escalation. On all scales up to 5 km a yellow or red line along the route is also displayed (in addition to the symbol). The length of this line corresponds to the extent of the traffic problem.NOTE! Traffic information is not available in all areas.

Other danger Queue

Road narrows Traffic diversion

Oncoming traffic Incident

Slippery road surface Slow traffic

Road worksSlow traffic in both directions

AccidentArea message

InformationOther information

Parking information


57

Navigation settings

Settings menu 58System settings 58Route options settings 59Screen settings 59Help settings 60Demo (simulation) 60


58

Navigation settings

[Settings]

Settings menuThe RTI system is supplied with basic settings which can be changed. Select Settings using UP or DOWN and press ENTER.Bright/dark colours: Press ENTER to confirm change of light intensity. Light intensity can also be set using the control for the instrument lighting.System: See System settings.Route options: See page 59.Traffic information: See page 52.Screen: See page 59.Help: See page 60.Start demo: See page 60.Select options in each settings menu using UP or DOWN. Press RIGHT to obtain submenus which are indicated by a black arrow. Select settings using the navigator. Confirm with ENTER.

[Settings] [System]

System settingsVoice Volume: 1 is minimum and 5 is maximum volume. Select Off to switch off guidance with voice messages.Guiding voice: Choose between a female or male voice for voice messages.Distance Unit: Choose between kilometres or miles.Language: Choose the language for voice messages and menus.Screen saver: If the screen saver is activated the screen goes blank after 30 seconds and relights automatically with guidance for example.Colours: Select colours. Bright colours are suitable in daylight. Dark colours are suitable for darkness and with strong sunlight.GPS Information: Displays how many satellites the system is presently receiving signals from as well as current position.Reset to factory settings: Reset to basic settings.


59

Navigation settings

[Settings] [Route options]

Route options settingsRoute type: Select fastest or shortest route at route calculation. If Route type Fast is selected the system chooses the biggest roads. If Route type Short is selected the system prioritises route length above road quality and road size.Avoid toll roads: Choose whether toll roads are to be avoided at route calculation.Av. motorways: Choose whether motorways are to be avoided at route calculation.Avoid ferries: Choose whether car ferries are to be avoided at route calculation.Av. traffic msg.: Choose whether the system is to register traffic messages at route calculation, see page 50.Reset to factory settings: Reset to basic settings.For technical reasons the system only uses big roads at route calcu-lation for longer distances. When NO is selected for toll roads and motorways they will be avoided as far as possible and only used if no other reasonable alternative is available.

[Settings] [Screen]

Screen settingsFacility selection: The facility symbols the system is to show or hide on the map are selected from a submenu.Navigation menu: Choose between displaying the main menu with Text or Icons.Compass: Choose whether the compass is to be displayed on the screen.Dest. compass: Points in the direction of the destination.Time/dist. to go: Indicates calculated journey time and distance to the destination.Current location: Choose whether the name of the street being negotiated is to be displayed on the lower part of the screen.Next guidance: Information on the next guidance point such as distance to it, street name, road sign information and type of manoeuvre.Map: If the map is hidden the system guides with an arrow.Reset to factory settings: Reset to basic settings.


60

Navigation settings

[Settings] [Help]

Help settingsHelp type: Select setting for help texts.About: Displays information on software, map version etc.Reset to factory settings: Reset to basic settings.

[Settings]

Demo (simulation)Select Start demo using UP or DOWN and press ENTER. Demo demonstrates the system when the car is stationary by simulating a journey to a specified destination. It is possible to apply all settings during the demonstration. Stop demo interrupts the simulation.NOTE! For the demonstration to work a destination must be specified and the car must be stationary.


61

Symbols on the map

Symbols - facilities 62


62

Symbols on the map

Petrol station Outdoor area Railway station/Local railway station Public flying club

Automobile club Ferry terminal Casino Parking garage

Car hire Liquid petroleum gas Shopping centre Parking

Cinema Golf course Museum Park & ride

Bowling Historical monument Conven./exhibi. centre Rest area

Bus station Hotel Night life/Music club Restaurant

City centre Sports complex Compress. natural gas Hospital

Airport Ice skating Amusement park Ski resort

Symbols - facilities


63

Symbols on the map

Marina Volvo Dealer

City hall/Community centre

Toll booth

Large company

Theatre/Opera

Tourist attraction

Tourist information

University/college

Winery


64

Symbols on the map


65

TV reception (option)

General 66Automatic channel programming 66Manual channel programming 66Adjusting the picture 66Remote control 67Audio system 67Steering wheel keypad 67


66


GeneralSettings can be made using the controls on the audio system, the remote control and the steering wheel keypad.NOTE! TV reception is only available when the car is stationary.NOTE! If the TV is on when the engine is switched off then the car battery can be discharged, depending on how well-charged it is and for how long the TV is used.

Off/OnPress POWER (10) and select TV using SOURCE (4).

Select TV channelPress PROGRAMS (2) on the remote control or turn PRESET/CD on the audio system to change channel.

VolumeAdjust the volume using VOLUME (2) on the audio system or VOL (2) on the remote control. The steering wheel keypad can also be used for this purpose.

Automatic channel programmingPress AUTO (6) for the system to search for the ten strongest channels. The channel with the strongest signal is allocated number one and then the others are rank-ordered according to signal strength.A TV channel can be on different frequencies depending on location. Search through the frequencies to obtain the best picture.

Manual channel programmingUse button (1) or (5).

Storing a channelPress MEMORY (3). Select a position using PROGRAMS (2). Press MEMORY (3). The current channel is stored.Channels can also be stored using PRESET/CD on the audio system. Briefly press PRESET/CD and then select a position by turning it. Press again. The current channel is stored.

Adjusting the pictureAim the remote control at the screen.COLOUR: Press PICTURE ( 7), then adjust the colour settings using the + (8) and - (9) buttons.CONTRAST: Press PICTURE (7), then adjust the contrast using the + (8) and - (9) buttons.DISPLAY MODE: Press PICTURE (7) to change the size of the TV picture. Switch between four modes: wide, full, normal and cinema using the + (8) and - (9) buttons.GROUP SELECT: For good TV reception in some countries the system must first be set to the country’s TV standard.Press PICTURE (7) to use the + (8) and - (9) buttons to browse the three groups of countries.Press PICTURE (7) again to reset.


67


Remote control

Radio and TV remote controlThe remote control can also be used to control the radio functions when the TV is switched off. (Applies to radio models with IR function).

Audio system

4

10, 2

6

1, 5

3, 2

Steering wheel keypad


68



69

Questions and answers

Questions and answers 70


70



Position of the car on the map is incorrect or jumpsThe GPS system indicates the position of the car with an accuracy of about 20 metres. There is a greater chance of error when driving on roads lying parallel to another road, winding roads, roads on several levels and after driving a long distance without making any distinctive turns. High mountains, buildings, tunnels, viaducts, over/under-passes etc. also have a negative affect on the reception of GPS signals, which means that accuracy in calculating the position of the car may decrease.

The RTI system does not always calculate the fastest/shortest roadWhen calculating a route, distance, width of road, type of road, number of right or left turns, roundabouts etc. are all taken into account in order to produce the best theoretical route. Experience and local knowledge may however lead to a more effective choice of route.

The RTI system uses toll roads, motorways and ferries even though I chose to avoid themFor technical reasons the system only uses big roads at route calculation for longer distances. When NO is selected for toll roads and motorways they will be avoided as far as possible and only used if no other reasonable alternative is available.

The position of the car on the map is incorrect after transportationIf the car is transported, for example by ferry or train, or in such a way as to impede the reception of GPS signals, it can take up to 5 minutes before the position of the car is correctly calculated.

The position of the car on the map is incorrect after the car battery has been disconnectedIf power has been cut from the GPS antenna, it can take more than 15 minutes for the GPS signals to be received correctly and the position of the car to be calculated.

The map image does not correspond with the real situationFactors such as the constant expansion and rebuilding of the road network, new traffic regulations constantly being introduced etc. means that the digital map database is not always complete. The information stored in the maps is constantly being developed and updated. Your Volvo Dealer can provide further information.See also www.volvocars.com/navi for further information on maps etc.

The scale of the map sometimes changesThe scale is affected by the speed of the car. At speeds in excess of 140 km/h, the largest degree of magnification is 250 metres. When speed is reduced to 120 km/h, the system can once again show all degrees of magnifi-cation.

If no detailed map information is available, the largest degree of magnification is 500 metres, regardless of speed.

The expected menu option is missingCheck the settings applied. Select Reset to factory settings to return to the settings origi-nally applied.

The system indicates the route I am already travelling when I request Calculate new route or DiversionThe system cannot find a good alternative to the current route.

The car symbol on screen jumps forwards or spinsThe system may need a few seconds to sense the position and movement of the car before driving off. Switch off both the system and the engine. Start again, but remain stationary for a while before starting to drive.I’m going to make a long journey but do not want to specify a special destination to the cities I am thinking of travelling through. How do I most easily create an itinerary?Specify the destination directly on the map using the hairline cross. The system automat-ically guides you to the final destination even though you are driving beside the interme-diate destination.


71


What do I do to choose a destination/intermediate destination that is not on the map?Specify the destination as usual. The system will tell you if you need to change to another DVD disc. (The complete road network is available on all discs, but the detailed infor-mation is divided into the relevant discs.)There are several map discs for the system. How do I know which to use?Primarily use the disc containing the detailed information of your local area. This disc is indicated by the disc case and the disc printing.The system will tell you when the disc needs to be changed.If you are planning to drive abroad then you should have all discs available in the car. Does my itinerary disappear when I change map disc?No, the itinerary remains available until you delete it.Why do I not always receive traffic messages?The function is not accessible, fully developed or not available in all markets. Check also that the correct settings are made under [Settings] [Route options settings].

My map discs are not up-to-dateContact your Volvo Dealer regarding the updating of map data.See also www.volvocars.com/navi Why are street addresses not available for a destination abroad?Each map disc contains the same European road network. Detailed information such as addresses, facilities etc. is divided into the relevant map disc for the geographic area. Check that the correct DVD disc is loaded.


72



73

Alphabetical index

AAddress as destination ...............22Alternative route .................. 42, 54Arrange the itinerary ..................38Automatic diversion ............. 50, 54BBACK .................................... 9, 11Basic functions ..................... 10, 11Batteries .......................................9CChannel programming, automatic ....................................66Channel programming, manual ........................................66Colours on the map ....................58Compass ............................... 12, 59Country/city for destination .......23DDelete itinerary ..........................39Demo (simulation) .....................60Dest. compass ...................... 12, 59Destination ........................... 12, 21Destination menu .......................16Destination on the map ..............33

Destination types ....................... 22Destination/intermediate destination ................................. 38Distance unit .............................. 58Diversion ................................... 42Diversion menu ......................... 18DOWN ........................................ 9DVD disc, care ............................ 8DVD disc, contents ..................... 8EENTER ...................................9, 11Enter an itinerary ....................... 38Entered destination .................... 34Escalation .................................. 56FFacilities ...............................11, 29Facilities, symbols ..................... 62Facility as destination ................ 29Facility name ............................. 30Facility type ............................... 30Ferries, avoid ............................. 59GGPS .............................................. 7Guidance ......................... 17, 26, 39

Guidance, arrow navigation ...... 41Guidance, intersection .............. 40Guidance, list ............................ 40Guidance, voice message .......... 41HHairline cross ............................ 45Help texts .................................. 14IIcons .......................................... 15Information on the facility ........ 32Intermediate destination ............ 12Intersection ........................... 25, 26Introduction ................................. 5IR receiver ................................... 9Itinerary and guidance .............. 37LLanguage ................................... 58Last ten destinations .................. 34LEFT ........................................... 9MMain unit with map disc ............. 7Manual structure ....................... 10Map ........................................... 43Map disc, contents ................. 8, 71

Alphabetical index


74

Alphabetical index

Map menu ............................ 18, 47Map scale ............................. 12, 44Map scroll ............................ 17, 45Map scrolling menu ............. 33, 46Menu structure ...........................13Motorways, avoid ......................59NNavigation settings ....................57Navigator ............................... 9, 11Next guidance ............................12Next guidance point ...................12OOff ..............................................10On ........................................ 10, 11PPosition of the car ................ 12, 70Present position ..........................12QQuestions and answers ...............70Quick start ..................................11RRemote control ...........................67Return trip ..................................34RIGHT .........................................9

Road sign information ............... 12Road types ................................. 12Route ....................................12, 44Route calculation ....................... 39Route options ............................. 59Route options settings ............... 59SSaved destinations ..................... 36Scale, route ................................ 44Screen saver ............................... 58Screen settings ......................59, 60Screen, care ................................. 8Search by phrase ........................ 27Search path ................................ 10Settings menu ............................ 19Shut down .................................. 14Start the system ......................... 14Steering wheel keypad ...........9, 67Store a location .......................... 35Store a TV channel .................... 66Stored location ........................... 12Street address ........................11, 24Street number ............................ 25Subcategories - facilities ........... 31

Surveillance .............................. 55Symbols and names .................. 35Symbols on the map .................. 61Symbols, traffic information ..... 56System settings ......................... 58TToll roads .................................. 59Traffic information ................... 49Traffic information filter ........... 53Traffic information symbols ................................ 53, 56Traffic information, detailed ...................................... 52Traffic messages, avoid ............ 50Traffic symbols on the map ................................. 12, 51Traffic-info selection ................ 50Travel time ................................ 12TV channel ................................ 66TV reception ............................. 66UUP ............................................... 9VVoice setting ............................. 58


7

VOLVO S60

RoAD AND TRAFFIC INFORMATION SYSTEM (rti)

Volvo Car Corporation TP 103 ( ), AT 0820, Printed in Sweden, Göteborg 2008, Copyright © 2000-2008 Volvo Car CorporationEnglish

OPERATING MANUAL

Documents

OPERATING MANUALaz685612.vo.msecnd.net/.../RTI_MY09_en-GB_tp10357.pdf · RTI is a traffic information and navigation system developed by Volvo. The system navigates to a specified