Operating and Monitoring Systems - CPIA7 156 2015-10-01·KP00·III·en Preferred products – in stock or available at short notice HMI Technologies for all Applications Operating

154 2015-10-01·KP00·III·en◄ Preferred products – in stock or available at short notice

Operating and Monitoring Systems


Kapitel_A7_KP_2016_en.book Seite 154 Donnerstag, 17. März 2016 1:43 13

A7

1552015-10-01·KP00·III·en ◄ Preferred products – in stock or available at short notice


Contents

Operating and Monitoring SystemsHMI Technologies for all Applications EXICOM 156SERIES 600 - KVM SystemsFunctional Principles EXICOM 158SERIES 600 - Zone 1, 2, 21, 22 EXICOM SERIES ET / MT-600 159SERIES IT-600 - Safe Area (Non-Ex) EXICOM SERIES IT-600 169SERIES 500 - Thin ClientsFunctional Principles EXICOM 174SERIES 500 - Zone 1, 2, 21, 22 EXICOM SERIES ET / MT-500 175SERIES IT-500 - Safe Area (Non-Ex) EXICOM SERIES IT-500 189SERIES 400 - Panel PCs / Full ClientsFunctional Principles EXICOM 194SERIES 400 - Zone 1, 2, 21, 22 EXICOM SERIES ET / MT-400 195SERIES IT-400 - Safe Area (Non-Ex) EXICOM SERIES IT-400 209SERIES 300 - Operator Interfaces Functional Principles EXICOM 214SERIES 300 - Zone 1, 2, 21, 22 EXICOM SERIES ET / MT-300 215SERIES 200 - Operator Interfaces Functional Principles EXICOM 222SERIES 200 - Zone 1, 2, 21, 22 EXICOM SERIES ET / MT-200 223FALCON Series - Operator InterfacesFunctional Principles EXICOM 228SERIES ET EXICOM ET-65 / -75 / -125 229SERIES MT EXICOM MT-65 233Enclosures for HMI-DevicesSERIES HSG EXICOM HSG-xxx 236


A7


HMI Technologies for all Applications


The ideal operating station for each type of plant - in hazardous as well as industrial production areas. Our modern EXICOM systems with different technologies provide the ideal operating station for each application. Our application-oriented platform strategy makes it easy for you to chose the right operating station. The same hardware and the same structure means the same plaform: Shark (xx8 devices), Manta (xx7 devices), Eagle (xx6 devices) and Raptor (208 devices). Each of these platforms has its own main area of application.

Platform Shark Platform Manta Platform Eagle Platform Raptor

Area of application Oil & Gasrough ambient conditions

Process automationGMP- and clean roomapplications

Machine automation Oil & Gasrough ambient conditionsMachine automationGMP- and clean roomapplications

Technology KVM systemsThin ClientPanel PC

Thin ClientPanel PCOperator Interface

Operator Interface

08607E00

ET Zone 1, 21 MT Zone 2, 22 IT Non-ExProcess Automation NetworksMES, ERP, QM

Oil & GasTank Farm Automation

MachineAutomation

WebCode HMIA


A7



HMI Technologies for all Applications

SERIES 600KVM Systems (Remote HMI), Shark (xx8 devices) and Manta platforms (xx7 devices)> Classic point-to-point data connection from a PC outside of the production area, via a transmission unit,

to an HMI on-site - reliable, simple and in use world-wide.

SERIES 500Thin Clients (Remote HMI), Shark (xx8 devices), Manta (xx7 devices) and Eagle platforms (xx6 devices)> Modern Server-Client structures provide flexible access options from different HMIs to different servers.

Flexible and cost-effective.

SERIES 400Panel PCs / Full Clients (Open HMI), Shark (xx8 devices), Manta (xx7 devices) and Eagle platforms (xx6 devices)> On-site intelligence. Fast Intel™, AMD or Atom® processors (depending on platform) ensure fast on-site

software applications; robust PC design - also for extreme temperatures.

SERIES 300Operator Interface> Complete operating system for complex machine applications in hazardous areas -

with integrated operating system and SPSPlusWIN software for easy engineering.

SERIES 200Operator Interface - SERIES 200, Raptor platform (208 devices)> The application of an innovative 7“ widescreen monitor for modern visualisation of machines,

small plants and drilling rigs in hazardous areas.

SERIES FalconOperator Interface - Falcon> Robust graphics / text terminals for simple machine operation and automation tasks -

with reader systems also ideal for tank storage and tank farm applications.


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7


Functional PrinciplesSERIES 600 - KVM Systems


SERIES 600 - KVM Systems A7

A classic KVM data connection via VGA/DVI or USB via copper or optical fibre cable to a terminal on-site - perfect image quality with digital data transfer.STAHL-HMI is the only provider of transmission units that produce perfect images on displays ranging in size from 15“ up to a 24“WU wide screen. The KVM CLASSIC solution has been developed for point-to-point data transmission. The SERIES 600 are certified for installation in zones 1, 2, 21 and 22 or have been designed for installation in industrial areas (Non-Ex).

14833E00

WebCode KVMA


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

KVM SystemsSERIES 600 - Zone 1, 2, 21, 22

159Operating and Monitoring Systems2015-10-01·KP00·III·en ◄ Preferred products – in stock or available at short notice

SERIES 600 - Zone 1, 2, 21, 22 A7

14225E00

WebCode KVMA

R. STAHL HMI provides the classic KVM solution (point-to-point) with digital data transfer via copper / FO connection, thus providing perfect image quality in Zone 1 / 2 / 21 / 22.

Platform> Shark (xx8 devices)> Manta (xx7 devices)

Applications> Process industry> Pharmaceutical plants> Chemical plants

Highlights> Digital transfer, no adjustment depending on

transfer distance> Brilliant image quality with LED backlights> GREEN technology - displays free of lead,

cadmium and mercury > Displays up to a maximum size of 24“WU

(1920 x 1200 pixels)

ATEX / IECExZone 0 1 2 20 21 22For use in x x x x

Field systemsDefinition Field systems

A field system consists of at least one HMI unit and its integrated software.If the HMI unit is mounted inside an enclosure, this enclosure and all other accessories mounted insided it are part of the field system. To enable you to order a field system we have developed a product code that can represent all possible combinations of device, software, enclosure and accessories.The product code consists of alphanumerical characters and may look as follows:ET-638-DVI3-1TX-00000100000-B3010000000The product code can be decoded as follows:

Decoding ET-638-DVI3-1TX - 00000100000 - B3010000000Definition Device type hyphen more detailed device

typehyphen Enclosure and

accessoriesFor an exact definition of each individual character please refer to the type code for field systems on the pages below. Due to the length of the type code for field systems the product descriptions and codes are printed on opposite pages.

Ordering Field systems can only be ordered with a valid and plausible product code. For this, all digits of the product code must be filled in with a valid character. Please note that for technical reasons not all theoretically possible product codes and thus field systems can actually be realised. Should you have any questions please do not hesitate to contact R. STAHL HMI Systems GmbH.


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-6x8 platform Shark (Part 1)Name Version Note Code Device design More detailed device design

- - DVI3- - 0 0 0 0 0 0 0 -

Series Zone 1, 21 see Basic price ET

Zone 2, 22 Deduction MTDisplay size 38 cm / 15“ Basic price 638

55 cm / 21.5“ Basic price 698Transfer technology

DVI3 KVM technology Standard DVI3

Media Digital transfer via CAT7 cable Standard 1TXDigital transfer via FO cable multi-mode Extra 1SXDigital transfer via FO cable single mode Extra 1LX

Processor none 0RAM none 0Display type Standard TFT (15“ only) Standard 0

Sunlight Readable Display 15“ Extra 1Sunlight Readable Display 21.5“ Standard 1

Data memory none 0Touch No touch Standard 0

Capacitive Multi-Touch (glass) 15“ Extra 3Capacitive Multi-Touch (glass) 21.5“ Extra 3

Power supply

24 VDC Extra 0100 ... 240 VAC Standard 1

Optional interface 1

No optional interface 0Bluetooth, no RFID Extra 3No Bluetooth, RFID (not possible for 638)

Extra 6

Bluetooth, RFID (not possible for 638)

Extra 9

Optional interface 2 / reader

No optional interface 0

Option 3 / Option box

No option 3 0

Enclosure design

EXICOM VESA 200 0

Operating system and image

none 0

Price calculation

Standard field systems Standard field systems of the ET-/MT-6x8 Shark platform devices are combinations with the following features:- DVI3 transfer technology- Digitale transfer via CAT7 cable- TFT display for 15“ or sunlight readable display for 21.5“ screens- No touch- AC power supply - No optional interfaces- Enclosure design, VESA mounting- Outdoor option -10 °C- No further mounting or enclosure options

The product code for this is:

xT-638-DVI3-1TX-00000100000-B3010000000 for the 15“ devicexT-698-DVI3-1TX-00000100000-B3010000000 for the 21.5“ device

The basic price only applies to these field systems.

Field systems options For all field systems other than the standard you need to add the extra charge of each required option to the basic price of the standard field system in question. Please note that not all options can be combined with one another (see notes on features).


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-6x8 platform Shark (part 2)Name Version Note Code Enclosures and Accessories

B 3 0 0 0 0 0 0 0 0

Enclosure Rugged panel design (RP) Standard BMaterial Seawater-proof aluminium (powder-coated) Standard 3Mounting option

VESA 200 mounting Standard 0Handles and feet (material: SS316L) Extra 4

Outdoorinstallation

-10 °C Standard 1Outdoor -40 °C Extra 5

Keyboard No keyboard, no pointing device Standard 0Integrated pointing device

No integrated pointing device (option not possible) 0

Separate pointing device

No separate pointing device 0

Separate reader

No separate reader 0

Emergency stop switch

No emergency stop switch 0

Separate power supply

No separate power supply 0

Further options 1

No further options 1 0

Further options 2



A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-6x7 platform Manta (part 1)Name Version Note Code Device design More detailed device design

- - DVI3- - 0 0 0 0 0 0 0 0 -


Zone 2, 22 Deduction MTDisplaysize

56 cm / 22“ Basic price 66761 cm / 24“ Basic price 67761 cm / 24“WU Basic price 687

Transfer technology


Media Digital transfer via CAT7 cable Standard CATDigital transfer via FO cable multi-mode Extra MMDigital transfer via FO cable single mode Extra SM

Processor none 0RAM none 0Display type Standard TFT Standard 0Data memory none 0Touch No touch Standard 0

Analogue resistive touch Extra 1Analog resistive glass touch Extra 2

Power supply

24 VDC Extra 0100 ... 240 VAC Standard 1

Optional interface 1





No option 3 0

Enclosuredesign

Aluminium front plate Standard 2Rear mount module 3


none 0

Price calculation

Standard field systems Standard field systems of the ET-/MT-6x7 Manta platform devices are combinations with the following features:- DVI3 transfer technology- Digitale transfer via CAT7 cable- TFT display- No touch- AC power supply - No optional interfaces- Aluminium front plate- No further mounting or enclosure optionsThe product code for this is:

xT-667-DVI3-CAT-00000100000-000000000020 for the 22“ devicexT-677-DVI3-CAT-00000100000-000000000020 for the 24“ devicexT-687-DVI3-CAT-00000100000-000000000020 for the 24“WU device


Field system options For all field systems other than the standard you need to add the extra charge of each required option to the basic price of the standard field system in question. Please note that not all options can be combined with one another (see notes on features).


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-6x7 platform Manta (part 2)Name Version Note Code Enclosures and Accessories

0 0 0 0

Enclosure No enclosure Standard 0Stainless steel enclosure clean room front door (CFR) Extra 1Stainless steel enclosure front door (FR) Extra 2Stainless steel enclosure back door(BD) Extra 8

Material No material (no enclosure) Standard 0Stainless steel V2A (SS304) Version 1Stainless steel V4A (SS316) for CFR Extra 2Stainless steel V4A (SS316) for FR and BD Extra 2

Mounting option

None, front panel mounting (no enclosure) Standard 0Wall mounting (not BD) Version 1Mounting on stand or wall bracket Version 2Ceiling mounting Version 3

Outdoorinstallation

-20 °C Standard 0Outdoor -20 °C Extra 3Outdoor -30 °C (not for AC devices) Extra 4

Keyboard(design,layout) /Keyboard enclosure

No keyboard, no pointing device Standard 0Keyboard enclosure stainless steel V2A (SS304) Extra >0Keyboard enclosure stainless steel V4A (SS316) Extra >0Keyboard layout: DE, QWERTZ Extra 1Keyboard layout: US, QWERTY Extra 2Keyboard layout: FR AZERTY Extra 3Keyboard layout: CH Extra 4Keyboard layout: ES Extra 7Keyboard layout: SI Extra 8Keyboard layout: FR-BE Extra 9

Integrated pointingdevice

No integrated pointing device (option not possible) 0Trackball 50 mm IP54 Standard 1Touchpad Extra 4Joystick Extra 5Mouse module Extra 6



Separate reader

No separate reader 0RFID-Crypt reader (max. -30 °C), inc. ReaderBox, (requires enclosure) components mounted in enclosure

Extra 1

RFID-ASC reader (max. -30 °C), inc. ReaderBox, (requires enclosure) components mounted in enclosure

Extra 2

RFID-Crypt reader (max. -30 °C), inc. ReaderBox,(requires enclosure) reader mounted in keyboard enclosure KBD (no separate pointing device possible)

Extra 7

RFID-ASC reader (max. -30 °C), inc. ReaderBox,(requires enclosure) reader mounted in keyboard enclosure KBD (no separate pointing device possible)

Extra 8

Prepraration for IDM-160-ex * barcode reader (max. -20 °C), wired, inc. ReaderBox (requires enclosure)components mounted in enclosure

Extra 4

Prepraration for IDM-160-BT-ex * barcode reader, (max. -20 °C), Bluetooth, inc. ReaderBox, base station and cable (requires enclosure) components mounted in enclosure

Extra 5


No emergency stop switch 0Emergency stop switch 8003, right ESR (requires enclosure) Extra 1Emergency stop switch 8003, left ESL (requires enclosure) Extra 2



Further options 1


Further options 2


Notes: On types and material of enclosures:Only the following values are permitted as possible product code combinations: 00, 11, 21, 81, 12, 22, 82

When chosing an enclosure you must also state a mounting option (Version: code 1, 2 or 3).

On keyboards:The material (stainless steel) of the keyboard enclosure is always the same as the material of the field housing. Thus, the extra charge for the material of the keyobard enclosure must be added depending on the material of the field enclosure.

* On barcode reader IDM-160:The barcode reader itself and any optional accessories are NOT part of the field system and must be ordered separately.


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Technical data - version ET-/MT-6x8 platform SharkExplosion protection ET-6x8

Global (IECEx)Gas and dust IECEx BVS 14.0116X

Ex e q [ia op is Ga] IIC T4 GbEx tb [ia op is Da] IIIC T115°C Db

Europe (ATEX)Gas and dust BVS 14 ATEX E134 X

E II 2(1) G Ex e q [ia op is Ga] IIC T4 GbE II 2(1) D Ex tb [ia op is Da] IIIC T115°C Db

Explosion protection MT-6x8Global (IECEx)

Gas and dust IECEx BVS 14.0116XEx nA nR [ia op is Ga] IIC T4 GcEx tc [ia op is Da] IIIC T115°C Dc

Europe (ATEX)Gas and dust BVS 14 ATEX E 134 X

E II 3(1) G Ex nA nR [ia op is Ga] IIC T4 GcE II 3(1) D Ex tc [ia op is Da] IIIC T115°C Dc

Certifications and certificatesCertificates IECEx, ATEX

Design ET-/MT-638 ET-/MT-698Display

Model TFT colour display, 16.7 million colours

TFT colour display, 16.7 million colours

Size 38 cm / 15“ 55 cm / 21.5“Resolution XGA 1024 x 768 pixels Full HD 1920 x 1080 pixelsFormat 5:4 16:9Type TFT 450 cd/m2 --Sunlight readable SR 1200 cd/m² (optional) SR 1000 cd/m²Backlight LED Backlight LED Backlight

Mounting type Rugged Panel Design (RP) Rugged Panel Design (RP)Power supply

Voltage 24 V DC or 100 ... 240 V AC / 50 ... 60 Hz

24 V DC or 100 ... 240 V AC / 50 ... 60 Hz

Current 8 A max at 24 V DC 2 A max at 100 ... 240 V AC

8 A max at 24 V DC 2 A max at 100 ... 240 V AC

Power typ. 100 W / max. 150 W (typ. 340 BTU / max. 510 BTU)

typ. 100 W / max. 150 W (typ. 340 BTU / max. 510 BTU)

Operating temperature rangeOperation -10 ... +65 °C* -10 ... +65 °C*Operation with heater -40 ... +65 °C -40 ... +65 °CStorage -40 ... +70 °C -40 ... +70 °CNote: * Operation at +65 °C for a maximum of 8h, for permanent operation +60 °C

Type of protection IP66 IP66Dimensions [mm]

(WxHxD) 380 x 394x 137 553 x 458 x 141Weight 22.6 kg 35 kg


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Technical data - version ET-/MT-6x7 platform MantaExplosion protection ET-6x7


Ex e q [ia op is Ga] IIC T4 GbEx tb IIIC [ia op is Da] IP65 T110°C Db


E II 2(1) G Ex e q [ia op is Ga] IIC T4+ GbE II 2(1) D Ex tb IIIC [ia op is Da] IP65 T110°C Db


Gas and dust IECEx BVS 14.0034XEx nA nR [ia op is Ga] IIC T4 GcEx tc IIIC [ia op is Da] IP66 T110°C Dc


E II 3(1) G Ex nA nR [ia op is Ga] IIC T4 GcE II 3(1) D Ex tc IIIC [ia op is Da] IP66 T110°C Dc

Certifications and certificatesCertificates IECEx, ATEX, Russia (GOST R) CEC / CSA, NEC / CSA ( GOST and CSA only at ET-6x7)

Design ET-/MT-667 ET-/MT-677 ET-/MT-687Display




Size 56 cm / 22“ 61 cm / 24“ 61 cm / 24“WUResolution WSXGA+ 1680 x 1050 pixels Full HD 1920 x 1080 pixels WUXGA 1920 x 1200 pixelsFormat 16:10 16:9 16:10Type TFT 250 cd/m2 TFT 300 cd/m2 TFT 300 cd/m2Backlight LED Backlight LED Backlight LED Backlight

OperationFront plate

Version AL Aluminium front plate Aluminium front plate Aluminium front plateVersion RM Rear mount module Rear mount module Rear mount module

Power supplyVoltage 24 V DC or

100 ... 240 V AC / 50 ... 60 Hz24 V DC or 100 ... 240 V AC / 50 ... 60 Hz

24 V DC or 100 ... 240 V AC / 50 ... 60 Hz







Operating temperature rangeOperation -20 ... +60 °C -20 ... +60 °C -20 ... +60 °CPermanent operation -20 ... +50 °C -20 ... +50 °C -20 ... +50 °COperation with heater option O30

-30 ... +50 °C -30 ... +50 °C -30 ... +50 °C

The O30 option is only available for AC version devices !Type of protection

ET-6x7 front / back IP66 / IP65 IP66 / IP65 IP66 / IP65MT-6x7 front / back IP66 / IP66 IP66 / IP66 IP66 / IP66

Dimensions [mm]Front (WxH) 660 x 475 660 x 475 660 x 475Cut-out (WxHxD) 615 x 435 x 110 615 x 435 x 110 615 x 435 x 110

WeightET-6x7 32 kg 32 kg 32 kgMT-6x7 16 kg 16 kg 16 kg


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Accessories and spare parts for ET-/MT-6x8 SharkName Design Order number Art.no. PS Weight

kgKeyboard / pointing device Ex i

Keyboard with integrated trackball 50 mmUSB interface3/5 keys, stainless steel enclosure V4A (SS316L)Language: DE, QWERTZ KBDi-USB-TB50-DE-

HSG-xx8-V4A243866 43 12.500

Language: US, QWERTY KBDi-USB-TB50-US-HSG-xx8-V4A

243867 43 12.500

Language: FR, AZERTY KBDi-USB-TB50-FR-HSG-xx8-V4A

247547 43 12.500

Keyboard with integrated touchpadUSB interface3/5 keys, stainless steel enclosure V4A (SS316L)Language: DE, QWERTZ KBDi-USB-P-DE-HSG-xx8-V4A 247548 43 12.500Language: US, QWERTY KBDi-USB-P-US-HSG-xx8-V4A 245741 43 12.500Language: FR, AZERTY KBDi-USB-P-FR-HSG-xx8-V4A 247549 43 12.500Keyboard with integrated joystickUSB interface3/5 keys, stainless steel enclosure V4A (SS316L)Language: DE, QWERTZ KBDi-USB-J-DE-HSG-xx8-V4A 247550 43 12.500Language: US, QWERTY KBDi-USB-J-US-HSG-xx8-V4A 247235 43 12.500Language: FR, AZERTY KBDi-USB-J-FR-HSG-xx8-V4A 247561 43 12.500Keyboard with integrated mouseUSB interface3/5 keys, stainless steel enclosure V4A (SS316L)Language: DE, QWERTZ KBDi-USB-M-DE-HSG-xx8-V4A 247562 43 12.500Language: US, QWERTY KBDi-USB-M-US-HSG-xx8-V4A 245642 43 12.500Language: FR, AZERTY KBDi-USB-M-FR-HSG-xx8-V4A 247563 43 12.500

Connection panel with connector

for operating voltage (AC) and FOMaterial: V4A (SS316L)Dimensions (WxHxD): 240 x 230 x 121 [mm] (without connectors)Operating voltage connection:Hawke N-FP-X-B-P-S-X-X-S-A 4-Pol PowerFO connection:VB-FO-MIL-HMA-Blkhd-2CH-SC-1m

CON-xx8-AC-FO-00 244377 43

for USB connectionMaterial: V4A (SS316L)Dimensions (WxHxD): 240 x 230 x 121 [mm] (without connectors)USB connection:Harting USB connector

CON-xx8-USB-00 244378 43

Field cable MilTac Breakout FO cable, basic length 2 m, SC plugs at both ends

VB-FO-MIL-SC-SC-2m 202201 43 0.500

MilTac Breakout FO cable, additional length in metres, price per metre

VB-FO-MIL-xm 202202 43

Indoor Breakout FO cable, basic length 2 m, SC plugs at both ends

VB-FO-SC-SC-62V04G-2m 202203 43 0.500

Indoor Breakout FO cable, additional length in metres, price per metre

VB-FO-62V04G-xm 202204 43

Adapter for DIN rail mounting VB-SC-SC-jack 229271 43 0.200


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Accessories and spare parts ET-/MT-6x8 platform Shark and ET-/MT-6x7 platform MantaName Design Order number Art.no. PS Weight

kgDesktop keyboard Ex i

Language: DE, QWERTZ, 102 keys, USB interface KBDi-DS102W-USB-DE 229304 43 1.500Language: US, QWERTY, 102 keys, USB interface KBDi-DS102W-USB-US 222254◄ 43 1.500Language: NO, QWERTY, 102 keys, USB interface KBDi-DS102W-USB-NO 229303 43 1.500

Desktop mouse Ex i Optical desktop mouse, USB interface MSi-JM0100-USB 222255◄ 43 0.200Transfer units Desktop enclosure

KVM transfer unit DVI3Connection to PC via DVI/USBData transfer CAT7

KVM-DVI3-CAT 221092◄ 43 1.500

KVM transfer unit DVI3Connection to PC via DVI/USBData transfer MM-FO

KVM-DVI3-MM-FO 221093◄ 43 1.500

KVM transfer unit DVI3Connection to PC via DVI/USBData transfer SM-FO

KVM-DVI3-SM-FO 221094◄ 43 1.500

Accessories / transfer unit

19“ rack mount front panelfor 1 DVI3 transfer unit DVI3-RackMountKit-1 221095 43 1.000for 2 DVI3 transfer units DVI3-RackMountKit-2 221096 43 1.000

Barcode scanner Ex i Handheld barcode scanner Zone 1, 2, 21, 22Wired, without cable, 1D Barcode, 630 nmReading speed 500 Scans/secReading distance up to 800 mm

IDM160-ex 224079 43 0.200

Handheld barcode scanner Zone 1, 2, 21, 22Wired, without cable1D Barcode, 630 nm, stacked PDF barcodesReading speed 500 Scans/secReading distance up to 800 mm

IDM160-PDF-ex 224080 43 0.200

Handheld barcode scanner Zone 1, 2, 21, 22Bluetooth, wireless, 1D Barcode, 630 nmReading speed 500 Scans/secReading distance up to 800 mm

IDM160-BT-ex 224087 43 0.260

Handheld barcode scanner Zone 1, 2, 21, 22Bluetooth, wireless1D Barcode, 630 nm, stacked PDF barcodesReading speed 500 Scans/secReading distance up to 800 mm

IDM160-BT-PDF-ex 223820 43 0.260

Base stations scanner

Base station handheld scanner BT, Bluetooth, Zone 1Access and loading station without cableBluetooth, loading in Zone 1

IDM160-BT-BaseBT-Z1 224092 43

Base station handheld scanner BT, Bluetooth, Non-ExAccess and loading station without cableBluetooth, loading in safe area

IDM160-BT-BaseBT 224093 43

Base station handheld scanner BT, Non-ExLoading station without cableno Bluetooth, loading in safe area

IDM160-BT-Base 224094 43

Connection cable Connection cable for IDM160Interface RS-232, Ex i 5.6 VCable length 1.8 m straight, Binder plug

VB-IDM160-xx6-RS232-SR-1.8m 224085 43 0.200

Connection cable for IDM160Interface RS-232, Ex i 5.6 VCable length 3.8 m, curled, Binder plug

VB-IDM160-xx6-RS232-SR-3.8m 224086 43 0.300

Connection cable for base loading station Z1Interface RS-232, Ex i 5.6 VCable length 1.8 m, straight, Binder plug

VB-IDM160-Base-RSi-RS232-SR-1.8m-Z1

224102 43 0.200

Connection cable for base loading station Z1Interface RS-232, Ex i 5.6 VCable length 3.8 m, curled, Binder plug


224103 43 0.300

Extension cable for IDM160Cable length 6 m, straight

VB-IDM160-EXT-6m-Z1 224108 43 0.500

Extension cable for IDM160Cable length 4.5 m, curled

VB-IDM160-EXT-4.5m-Z1 224109 43 0.400

Tripod Tripod for IDM160Material: ABS (Acrylnitril-Butadien-Styrol)

IDM160-tripod 224106 43 0.200

Desk holder Desk holder for IDM160Material: ABS (Acrylnitril-Butadien-Styrol)

IDM160-Deskholder 224107 43 0.200

Power supply Power supply for base loading station Non-Ex DSP-IDM160-DC5V 224095 43 0.200Battery Replacement battery for IDM160-BT-ex IDM160-BT-ex-Lion 224091 43 0.200


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




CAT7 data cable CAT7 data cable 4x2xAWG23, incl. 2x RJ45 connectorsLength: 50 m VB-TP-CAT7-AWG23-50m 220597 43 3.500Length: 75 m VB-TP-CAT7-AWG23-75m 220598 43 5.000Length: 100 m VB-TP-CAT7-AWG23-100m 220599◄ 43 7.000Length: 125 m VB-TP-CAT7-AWG23-125m 220600◄ 43 8.500Length: 150 m VB-TP-CAT7-AWG23-150m 220601◄ 43 10.000

Accessories and spare parts ET-/MT-6x8 platform Shark and ET-/MT-6x7 platform MantaName Design Order number Art.no. PS Weight

kg


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

KVM SystemsSERIES IT-600 - Safe Area (Non-Ex)


SERIES IT-600 - Safe Area (Non-Ex) A7

05981E00

WebCode KVMA

R. STAHL HMI provides the classic KVM solution (point-to-point) with digital data transfer via copper / FO connection, thus providing perfect image quality in industrial production areas.

Platform> Manta (xx7 devices)

Applications> Industrial production

Highlights> Digital transfer, no adjustment depending on

transfer distance> Brilliant image quality with LED backlights> GREEN technology - displays free of lead,

cadmium and mercury > Displays up to a maximum size of 24“WU

(1920 x 1200 pixels)


A field system consists of at least one HMI unit and its integrated software.If the HMI unit is mounted inside an enclosure, this enclosure and all other accessories mounted insided it are part of the field system. To enable you to order a field system we have developed a product code that can represent all possible combinations of device, software, enclosure and accessories.The product code consists of alphanumerical characters and may look as follows:IT-667-DVI3-CAT-00000100020-211400000000The product code can be decoded as follows:

Decoding IT-667-DVI3-CAT - 00000100020 - 211400000000Definition Device type hyphen more detailed device





A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system IT-6x7 platform Manta (Part 1)Name Version Note Code Device design More detailed device design

- - DVI3- - 0 0 0 0 0 0 0 0 -

Series Non-Ex ITDisplaysize


Transfer technology


Media Digital transfer via CAT7 cable Standard CATDigital transfer via FO cable multi-mode

Extra MM

Digital transfer via FO cable single mode

Extra SM

Processor none 0RAM none 0Display type Standard TFT Standard 0Data memory none 0Touch No touch Standard 0

Analogue resistive touch Extra 1Analogue resistive glass touch Extra 2

Power supply 24 VDC Extra 0100 ... 240 VAC Standard 1

Optionalinterface 1


Optionalinterface 2 / reader



No option 3 0

Enclosuredesign



none 0

Price calculation

Standard field systems Standard field systems of the IT-6x7 Manta platform devices are combinations with the following features:- DVI3 transfer technology- Digitale transfer via CAT7 cable- TFT display- No touch- AC power supply - No optional interfaces- Aluminium front plate- No further mounting or enclosure optionsThe product code for this is:

IT-667-DVI3-CAT-00000100020-000000000000 for the 22“ deviceIT-677-DVI3-CAT-00000100020-000000000000 for the 24“ deviceIT-687-DVI3-CAT-00000100020-000000000000 for the 24“WU device




A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-6x7 platform Manta (Part 2)Name Version Note Code Enclosures and Accessories

0 0 0 0 0

Enclosure No enclosure Standard 0Stainless steel enclosure clean room front door (CFR) Extra 1Stainless steel enclosure front door (FR) Extra 2Stainless steel enclosure back door (BD) Extra 8


Mounting option

None, front panel mounting (no enclosure) Standard 0Wall mounting (not BD) Version 1Mounting on stand or wall bracket Version 2Ceiling mounting Version 3

Outdoorinstallation

-20 °C Standard 0Outdoor -20 °C Extra 3Outdoor -30 °C (not for AC devices) Extra 4

Keyboard(design,layout) /Keyboard enclosure

No keyboard, no pointing device Standard 0Keyboard enclosure stainless steel V2A (SS304) Extra >0Keyboard enclosure stainless steel V4A (SS316) Extra >0Keyboard layout: DE, QWERTZ Extra 1Keyboard layout: US, QWERTY Extra 2Keyboard layout: FR AZERTY Extra 3Keyboard layout: CH Extra 4Keyboard layout: ES Extra 7Keyboard layout: SI Extra 8Keyboard layout: FR-BE Extra 9

Integrated pointingdevice




Separate reader



No emergency stop switch 0Emergency stop switch 8003, right ESR Extra 1Emergency stop switch 8003, left ESL Extra 2



Further options 1


Further options 2






A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Technical dataDesign IT-667 IT-677 IT-687Display









24 V DC or 100 ... 240 V AC / 50 ... 60 Hz







Operating temperature rangeOperation -20 ... +60 °C -20 ... +60 °C -20 ... +60 °CPermanent operation -20 ... +50 °C -20 ... +50 °C -20 ... +50 °COperation with heater option O30

-30 ... +50 °C -30 ... +50 °C -30 ... +50 °C


Front IP66 IP66 IP66Back IP20 IP20 IP20

Dinemsions [mm]Front (WxH) 660 x 475 660 x 475 660 x 475Cut-out (WxHxD) 615 x 435 x 110 615 x 435 x 110 615 x 435 x 110

Weight 10 kg 10 kg 10 kg

Accessories and spare parts

Name Design Order number Art.no. PS Weight

kg

Transfer units Desktop enclosure

KVM transfer unit DVI3Connection to PC via DVI/USBData transfer CAT7

KVM-DVI3-CAT 221092◄ 43 1.500

KVM transfer unit DVI3Connection to PC via DVI/USBData transfer MM-FO

KVM-DVI3-MM-FO 221093◄ 43 1.500

KVM transfer unit DVI3Connection to PC via DVI/USBData transfer SM-FO

KVM-DVI3-SM-FO 221094◄ 43 1.500

Accessories / transfer unit

19“ rack mount front panel

for 1 DVI3 transfer unit DVI3-RackMountKit-1 221095 43 1.000

for 2 DVI3 transfer unit DVI3-RackMountKit-2 221096 43 1.000


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7





A7


Functional PrinciplesSERIES 500 - Thin Clients


SERIES 500 - Thin Clients

The Thin Client technology is ideal for flexible access options with central data management.Each ERP / MES network can be accessed from each Thin Client via the IP address, giving users the greatest possible flexibility on site. The SERIES 500 operating stations can be integrated into modern networks as Thin Clients or with a KVM box via KVM-over-IP. Up to four Remote HMIs can access one KVM box with one software license, thus cost-effectively communicating with several PCs - for example, when monitoring the production process and simultaneously applying Condition Monitoring.Multi-monitoring with several on-site terminals can as easily be implemented as the application as Thin Client in a server environment with virtual work stations.All EXICOM Thin Clients run our Remote firmware, which protects the system from external manipulation, permanently monitors and renews the data transfer and controls communication via RDP, VNC and [email protected] SERIES 500 HMIs are certified for installation in Zones 1, 2, 21 and 22 or have been designed for installation in industrial areas (Non-Ex).

14829E00

WebCode THINCLIENTSA


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

Thin ClientsSERIES 500 - Zone 1, 2, 21, 22


SERIES 500 - Zone 1, 2, 21, 22 A7

12605E00


The SERIES 500 is ideal for network structures and virtual environments - it enables highly flexible access from each Thin Client to the ERP / MES system.

Platform> Shark (xx8 devices)> Manta (xx7 devices)> Eagle (xx6 devices)

Applications> Process industry> Machine automation> Drilling rigs

Highlights> RDP, VNC and Netc@p possible, also LAN,

WLAN, Internet> With Remote Firmware for addtional system

safety > Access from each operating station to

one / several PCs> Cost-effective hardware and central data

administration> 15" to 24"WU displays> Touch screen as standard for 5x6 devices

ATEX / IECExZone 0 1 2 20 21 22For use in x x x x


A field system consists of at least one HMI unit and its integrated software.If the HMI unit is mounted inside an enclosure, this enclosure and all other accessories mounted insided it are part of the field system. To enable you to order a field system we have developed a product code that can represent all possible combinations of device, software, enclosure and accessories.The product code consists of alphanumerical characters and may look as follows:ET-538-2TX-23050100008-B30100000000The product code can be decoded as follows:

Decoding ET-538-2TX - 23050100008 - B30100000000Definition Device type hyphen more detailed device





A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-5x8 platform Shark (Part 1) (available from Q3/2016)Name Version Note Code Device design More detailed device design

- - - 2 3 5 0 0 0 8 -



38 cm / 15“ Basic price 53855 cm / 21.5“ Basic price 598

Ethernet 1x 1000Base-TX copper Ethernet combination with WLAN possible

Version 1TX

2x 1000Base-TX copper Ethernet combination with WLAN not possible

Standard 2TX

2x 100Base-FX copper Ethernetcombination with WLAN not possible

Extra 2FX

Processor AMD GX-217GA 2RAM 4 GB 3Display type Standard TFT (15“ only) Standard 0

Sunlight Readable Display 15“ Extra 1Sunlight Readable Display 21.5“ Standard 1

Data memory 60 GB 5Touch No touch Standard 0

Capacitive multi-touch (glass) 15“ Extra 3Capacitive multi-touch (glass) 21.5“ Extra 3


Optionalinterface 1

No optional interface Standard 0WLAN 2.4 GHz, no Bluetooth, no RFID Extra 1WLAN 2.4 GHz and 5 GHz, no Bluetooth, no RFID Extra 2No WLAN, Bluetooth, no RFID Extra 3WLAN 2.4 GHz, Bluetooth, no RFID Extra 4WLAN 2.4 GHz and 5 GHz, Bluetooth, no RFID Extra 5No WLAN, no Bluetooth, RFID* Extra 6WLAN 2.4 GHz, no Bluetooth, RFID* Extra 7WLAN 2.4 GHz and 5 GHz, no Bluetooth, RFID* Extra 8No WLAN, Bluetooth, RFID* Extra 9WLAN 2.4 GHz, Bluetooth, RFID* Extra AWLAN 2.4 GHz and 5 GHz, Bluetooth, RFID* Extra BIn case of WLAN option only 1TX Ethernet version possible / * no RFID for 538 devices




No option 3 0

Enclosure design

EXICOM VESA 200 0


Windows Embedded Standard 7 (WES7) & Remote Firmware

8

Price calculation

Standard field systems Standard field systems of the ET-/MT-5x8 Shark platform devices are combinations with the following features:- 2x 1000Base-TX interface- AMD GX processor- 4 GB RAM- TFT display for 15“ and sunlight readable display for 21.5“- 60 GB data memory- No touch- AC power supply- No optional interfaces- Enclosure design, VESA mounting- Outdoor option -10 °C- No further mounting or enclosure optionsThe product code for this is:

xT-538-2TX-23050100008-B3010000000 for the 15“ devicexT-598-2TX-23150100008-B3010000000 for the 21.5“ device




A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-5x8 platform Shark (Part 2) (available from Q3/2016)Name Version Note Code Enclosures and Accessories

B 3 0 0 0 0 0 0 0 0

Enclosure Rugged Panel Design Standard BMaterial Seawater-proof aluminium (powder-coated) Standard 3Mounting option

VESA 200 mounting Standard 0Handles and feet (material SS316L) Extra 4

Outdoor-Installation

- 10 °C Standard 1- 40 °C Extra 5

Keyboard No keyboard, no pointing device Standard 0Integrated No integrated pointing device (option not possible) 0Separate pointing device


Separate reader



No emergency stop switch 0



Further options 1


Further options 2



A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-5x7 platform Manta (Part 1)Name Version Note Code Device design More detailed device design

- - - 0 0 0 0 -




Ethernet 1x 10/100Base-TX copper Ethernet Standard TX1x 1000Base-SX FO Ethernet Extra SX

Processor ATOM N270 1ATOM E3815 (available from Q3/2016)

6

RAM 512 MB Standard 02 GB (for Delta V version or ATOM E3815 only) Standard 2

Display type Standard TFT Standard 0Data memory 1 GB SSD Standard 0

16 GB (for Delta V version or ATOM E3815 only) Standard 3Touch No touch Standard 0



Optionalinterface 1





No option 3 0

Enclosuredesign


Operating system andimage

Windows Embedded Standard 2009 (WES2009) & Remote Firmware

Standard 7

Windows Embedded Standard 7 (WES7) & Remote Firmware (ATOM E3815 only)

Extra 8

Windows Embedded Standard 7 (WES7), Remote Firmware and Delta V

Extra H

Price calculation

Standard field systems Standard field systems of the ET-/MT-5x7 platform Manta devices are combinations with the following features:- 10/100Base-TX interface- ATOM N270 processor- 512 MB RAM- TFT display- 1 GB data memory- No touch- AC power supply- No optional interfaces- Operating system Windows Embedded Standard 2009 (WES2009) & Remote Firmware- Aluminium front plate- No further mounting or enclosure optionsThe product code for this is:

xT-567-TX-10000100027-000000000000 for the 22“ devicexT-577-TX-10000100027-000000000000 for the 24“ devicexT-587-TX-10000100027-000000000000 for the 24“WU device




A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-5x7 platform Manta (Part 2)Name Version Note Code Enclosures and Accessories

0 0 0 0

Enclosure No enclosure Standard 0Stainless steel enclosure clean room front door (CFR) Extra 1Stainless steel enclosure front door (FR) Extra 2Stainless steel enclosure back door (BD) Extra 8


Mounting option

None, front panel mounting (no enclosure) Standard 0Wall mouting (not BD) Version 1Mounting on stand or wall bracket Version 2Ceiling mounting Version 3

Outdoor-Installation

-20 °C Standard 0Outdoor -20 °C Extra 3Outdoor -30 °C (only for AC devices) Extra 4

Keyboard(design,layout) /keyboard enclosure

No keyboard, no pointing device Standard 0Keyboard enclosure stainless steel V2A (SS304) Extra >0Keyboard enclosure stainless steel V4A (SS316) Extra >0Keyboard language: DE, QWERTZ Extra 1Keyboard language: US, QWERTY Extra 2Keyboard language: FR, AZERTY Extra 3Keyboard language: CH Extra 4Keyboard language: ES Extra 7Keyboard language: SI Extra 8Keyboard language: FR-BE Extra 9

Integrated pointing device




Separate reader

No separate reader 0RFID-Crypt reader (max. -30 °C), inc. ReaderBox, (requires enclosure) components mounted in enclosure

Extra 1

RFID-ASC reader (max. -30 °C), inc. ReaderBox, (requires enclosure) components mounted in enclosure

Extra 2

RFID-Crypt reader (max. -30 °C), inc. ReaderBox,(requires enclosure) reader mounted in keyboard enclosure KBD (no separate pointing device possible)

Extra 7

RFID-ASC reader (max. -30 °C), inc. ReaderBox,(requires enclosure) reader mounted in keyboard enclosure KBD (no separate pointing device possible)

Extra 8

Prepraration for IDM-160-ex * barcode reader (max. -20 °C), wired, inc. ReaderBox (requires enclosure)components mounted in enclosure

Extra 4

Prepraration for IDM-160-BT-ex * barcode reader, (max. -20 °C), Bluetooth, inc. ReaderBox, base station and cable (requires enclosure) components mounted in enclosure

Extra 5





Further options 1


Further options 2


Notes: On types and material of enclosures:Only the following values are permitted as possible product code combinations: 00, 11, 21, 81, 12, 22, 82When chosing an enclosure you must also state a mounting option (Version: code 1, 2 or 3).




A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-5x6-A platform Eagle (Part 1)Name Version Note Code Device design more detailed device design

- - - 1 0 0 0 -

Series Zone 1, 21 ETZone 2, 22 Deduction MT

Displaysize

38 cm / 15“ Basic price 536-A48 cm / 19“ Basic price 556-A

Ethernet 1x 10/100Base-TX copper Ethernet Standard TX1x 100Base-FX FO Ethernet Version FX

Processor Geode LX800 5ATOM E3815 (available from Q3/2016) Extra 6

RAM 512 MB Standard 02 GB (for ATOM E3815 only) Standard 2

Display type Standard TFT Standard 0Sunlight Readable Display 15" Extra 1

Data memory 1 GB SSD Standard 016 GB (for ATOM E3815 only) Standard 3

Touch Analogue resistive touch Standard 1Power supply 24 VDC Standard 0

The AC version power supply have to be selected via the option „separate power supply“ at type code part 2.Optionalinterface 1



No optional interface 0Reader interface Ex i Extra 1


No option 3 0

Enclosuredesign

Polyester on aluminium Standard 0Stainless steel on aluminium Extra 1


Windows Embedded Standard 2009 (WES2009) & Remote Firmware (ATOM N270 only)

Standard 7


Extra 8

Notes: On RAM and Data memory:The combination of 2 GB RAM and 16 GB data memory is only possible with the ATOM E3815 processor.

Price calculation

Standard field systems Standard field systems of the ET-/MT-5x6-A platform Eagle devices are combinations with the following features:- TX or FX interface - Geode LX800 processor- 512 MB RAM- TFT display- 1 GB data memory- Analogue resistive touch- DC power supply - No optional interfaces - Operating system Windows Embedded Standard 2009 (WES2009) & Remote Firmware- Polyester front plate- No further mounting or enclosure optionsThe product code for a 15“ device with Ethernet TX interface (for example) would be:

xT-536-A-TX-50001000007-000000000000

The basic price only applies to this and other, similar field systems.



A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Type code field system ET-/MT-5x6-A platform Eagle (Part 2)Name Version Note Code Enclosures and Accessories

0 0

Enclosuretype

No enclosure Standard 0Stainless steel enclosure clean room front door (CFR) Extra 1Stainless steel enclosure front door (FR) Extra 2Rigfloor enclosure version 3 (preparation for AC) Extra 3Stainless steel enclosure back door (BD) Extra 8

Material No material (no enclosure) Standard 0Stainless steel V2A (SS304) Version 1Stainless steel V4A (SS316) for CFR Extra 2Stainless steel V4A (SS316) for FR and BD Extra 2Aluminium (Rigfloorg enclosure only) 3

Mounting option

None, front panel mounting (no enclosure) Standard 0Wall mounting (not BD) Version 1Mounted on stand or wall bracket Version 2Ceiling mounting Version 3

Outdoor installation

-20 °C (not with keyboard) Standard 0-10 °C (with keyboard) Standard 1Outdoor -10 °C (with keyboard, breather) Extra 2Outdoor -20 °C (only with enclosure, breather, no keyboard) Extra 3Outdoor -30 °C (only with enclosure, heater, breather, no keyboard) Extra 4Outdoor -40 °C (only with enclosure, heater, insulation, breather, no keyboard)

Extra 5

Keyboard(design,layout) /keyboard enclosure

No keyboard, no pointing device Standard 0Keyboard enclosure stainless steel V2A (SS304) Extra >0Keyboard enclosure stainless steel V4A (SS316) Extra >0Keyboard language: DE, QWERTZ Extra 1Keyboard language: US, QWERTY Extra 2Keyboard language: FR, AZERTY Extra 3Keyboard language: DK Extra 6

Integratedpointingdevice

No integrated pointing device 0Trackball 50 mm IP54 Extra 1Joystick (2 keys) Extra 5

Separatepointingdevice

No separate pointing device 0Trackball 50 mm IP54 Extra 1Joystick (1 keys) Extra 5

Separate reader

No separate reader 0RFID-Crypt reader,(requires enclosure) mounted in enclosure Extra 1RFID-ASC reader, (requires enclosure) mounted in enclosure Extra 2RFID-Crypt reader, (requires enclosure)reader mounted in keyboard enclosure KBD (no separate pointing device possible)

Extra 7

RFID-ASC reader, (requires enclosure)reader mounted in keyboard enclosure KBD (no separate pointing device possible)

Extra 8

RFID readers require the optional reader interface Ex i / RFID reader max. -30 °C Preparation IDM-160-ex * barcode reader (max. -20 °C), wired, inc. ReaderBox, (requires enclosure) components mounted in enclosure

Extra 4

Preparation IDM-160-BT-ex * barcode reader (max. -20 °C), Bluetooth, inc. ReaderBox, base station and cable(requires enclosure) components mounted in enclosure

Extra 5

Emergencystop switch



No separate power supply 0100 ... 230 VAC (requires enclosure), inc. DPSq-120-24-block for Zone 1

Extra 1

Further options 1


Further options 2







A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Technical data - version ET-/MT-5x8 platform SharkExplosion protection ET-5x8


Ex e q [ia op is Ga] IIC T4 GbEx tb IIIC [ia op is Da] IIIC T115°C Db


E II 2(1) G Ex e q [ia op is Ga] IIC T4 GbE II 2(1) D Ex tb [ia op is Da] IIIC T115°C Db


Gas and dust IECEx BVS 14.0116XEx nA nR [ia op is Ga] IIC T4 GcEx tc [ia op is Da] IIIC T115°C Dc


E II 3(1) G Ex nA nR [ia op is Ga] IIC T4 GcE II 3(1) D Ex tc [ia op is Da] IIIC T115°C Dc

Certifications and certificatesCertificates IECEx, ATEX

Design ET-/MT-538 ET-/MT-598Display



Size 38 cm / 15“ 55 cm / 21.5“Resolution XGA 1024 x 768 pixels Full HD 1920 x 1080 pixelsFormat 5:4 16:9Type TFT TFT 450 cd/m2 - -

Sunlight Readable SR 1200 cd/m² (optional) SR 1000 cd/m²Backlight LED Backlight LED Backlight

Mounting design Rugged Panel Design (RP) Rugged Panel Design (RP)Power supply

Voltage 24 V DC or 100 ... 240 V AC / 50 ... 60 Hz

24 V DC or 100 ... 240 V AC / 50 ... 60 Hz



Power typ. 100W / max. 150 W (typ. 340 BTU / max. 510 BTU)

typ. 100W / max. 150 W (typ. 340 BTU / max. 510 BTU)

Operating temperature rangeOperation -10 ... +65 °C* -10 ... +65 °C*Operation with heater -40 ... +65 °C -40 ... +65 °CStorage -40 ... +70 °C -40 ... +70 °CNote: * Operation at +65 °C for a maximum of 8 h, for permanent operation +60 °C

Type of protection IP66 IP66Dimensions [mm]

(WxHxD) 380 x 394 x 137 553 x 458 x 141Weight 22.6 kg 35 kg


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Technical data - version ET-/MT-5x7 platform MantaExplosion protection ET-5x7


Ex e q [ia op is Ga] IIC T4 GbEx tb IIIC [ia op is Da] IP65 T110°C Db


E II 2(1) G Ex e q [ia op is Ga] IIC T4 GbE II 2(1) D Ex tb IIIC [ia op is Da] IP65 T110°C Db


Gas and dust IECEx BVS 14.0034XEx nA nR [ia op is Ga] IIC T4 GcEx tc IIIC [ia op is Da] IP66 T110°C Dc


E II 3(1) G Ex nA nR [ia op is Ga] IIC T4 GcE II 3(1) D Ex tc IIIC [ia op is Da] IP66 T110°C Dc

Certifications and certificatesCertificates IECEx, ATEX, Russia (GOST R) CEC / CSA, NEC / CSA (GOST and CSA only at ET-5x7)

Design ET-/MT-567 ET-/MT-577 ET-/MT-587Display









24 V DC or 100 ... 240 V AC / 50 ... 60 Hz







Operating temperature rangeOperation -20 ... +60 °C -20 ... +60 °C -20 ... +60 °CPermanent operation -20 ... +50 °C -20 ... +50 °C -20 ... +50 °COperation with heater O30 -30 ... +50 °C -30 ... +50 °C -30 ... +50 °C


ET-5x7 front / back IP66 / IP65 IP66 / IP65 IP66 / IP65MT-5x7 front / back IP66 / IP66 IP66 / IP66 IP66 / IP66

Dimensions [mm]Front (WxH) 660 x 475 660 x 475 660 x 475Cut-out (WxHxD) 615 x 435 x 110 615 x 435 x 110 615 x 435 x 110

WeightET-5x7 32 kg 32 kg 32 kgMT-5x7 16 kg 16 kg 16 kg


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Technical data - version ET-/MT-5x6-A platform EagleExplosion protection ET-5x6-A

Global (IECEx)Gas and dust IECEx TUR 11.0006XVersion TX Ex d e ia ib mb [ia ib] IIC T4 Gb

Ex ia tb [ia ib] IIIC T80°C Db IP66Version FX Ex d e ia ib mb [ia ib op is] IIC T4 Gb

Ex ia tb [ia ib op is] IIIC T80°C Db IP66Europe (ATEX)

Gas and dust TÜV 11 ATEX 7041 XVersion TX E II 2 (2) G Ex d e ia ib mb [ia ib] IIC T4 Gb

E II 2 (2) D Ex ia tb [ia ib] IIIC T80°C Db IP66Version FX E II 2 (2) G Ex d e ia ib mb [ia ib op is] IIC T4 Gb

E II 2 (2) D Ex ia tb [ia ib op is] IIIC T80°C Db IP66Explosion protection MT-5x6-A

Global (IECEx)Gas and dust IECEx TUR 11.0015XVersion TX Ex d e ia ib mb nA [ib Gb] [ic] IIC T4 Gc

Ex ia tc [ib Db] [ic] IIIC T80°C Dc IP66Version FX Ex d e ia ib mb nA [ib op is Gb] [ic] IIC T4 Gc

Ex ia tc [ib op is Db] [ic] IIIC T80°C Dc IP66Europe (ATEX)

Gas and dust TÜV 11 ATEX 7103 XVersion TX E II 3 (2/3) G Ex d e ia ib mb nA [ib Gb] [ic] IIC T4 Gc

E II 3 (2/3) D Ex ia tc [ib Db] [ic] IIIC T80°C Dc IP66Version FX E II 3 (2/3) G Ex d e ia ib mb nA [ib op is Gb] [ic] IIC T4 Gc

E II 3 (2/3) D Ex ia tc [ib op is Db] [ic] IIIC T80°C Dc IP66Certifications and certificates

ET-/MT-5x6-ACertificates IECEx, ATEX, Brazil (INMETRO), Canada (CSA), Kazakhstan (TR), Russia (TR), Belarus (TR), USA (UL),

China (CNEX)Ship approval DNV, LR

Design ET-/MT-536-A ET-/MT-556-ADisplay

Model TFT colour display, 16,777,216 colours TFT colour display, 16,777,216 coloursSize 38 cm / 15“ 48 cm / 19“Resolution XGA 1024 x 768 pixels SXGA 1280 x 1024 pixelsFormat 4:3 5:4Type TFT 350 cd/m2 TFT 350 cd/m2

Sunlight readable (optional)

SR 1000 cd/m – –

Backlight LED Backlight LED BacklightOperation

Front plateVersion PES Polyester on aluminium Polyester on aluminiumVersion VA Stainless steel on aluminium Stainless steel on aluminium

Function keys 8 8Softkeys – – – –Alphanumerical and system keys

– – – –

Power supplyVoltage 24 V DC 24 V DCCurrent 1.2 A 1.2 APower 36 W 36 W

Operating temperature rangeOperation -20 ... +55 °C -20 ... +55 °COperation with heater -30 ... +55 °C -30 ... +55 °COperation with heater, enclosure insulation and protective screen

-40 ... +55 °C -40 ... +55 °C

Note Operation at +55 °C for a maximum of 5 h, for permanent operation +50 °CType of protection IP66 IP66Dimensions [mm]

Front (WxH) 440 x 340 535 x 425Cut-out (WxHxD) 427.5 x 327.5 x 165 522.5 x 412.5 x 165

Weight 18 kg 25 kg


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Accessories and spare parts - for ET-/MT-5x8 platform SharkName Design Order Number Art.no. PS Weight

kgKeyboard / pointing device Ex i

Keyboard with integrated trackball 50 mmUSB interface3/5 keys, stainless steel enclosure V4A (SS316L)Language: DE, QWERTZ KBDi-USB-TB50-DE-HSG-xx8-V4A 243866 43 12.500Language: US, QWERTY KBDi-USB-TB50-US-HSG-xx8-V4A 243867 43 12.500Language: FR, AZERTY KBDi-USB-TB50-FR-HSG-xx8-V4A 247547 43 12.500Keyboard with integrated touchpadUSB interface3/5 keys, stainless steel enclosure V4A (SS316L)Language: DE, QWERTZ KBDi-USB-P-DE-HSG-xx8-V4A 247548 43 12.500Language: US, QWERTY KBDi-USB-P-US-HSG-xx8-V4A 245741 43 12.500Language: FR, AZERTY KBDi-USB-P-FR-HSG-xx8-V4A 247549 43 12.500Keyboard with integrated joystickUSB interface3/5 keys, stainless steel enclosure V4A (SS316L)Language: DE, QWERTZ KBDi-USB-J-DE-HSG-xx8-V4A 247550 43 12.500Language: US, QWERTY KBDi-USB-J-US-HSG-xx8-V4A 247235 43 12.500Language: FR, AZERTY KBDi-USB-J-FR-HSG-xx8-V4A 247561 43 12.500Keyboard with integrated mouseUSB interface3/5 keys, stainless steel enclosure V4A (SS316L)Language: DE, QWERTZ KBDi-USB-M-DE-HSG-xx8-V4A 247562 43 12.500Language: US, QWERTY KBDi-USB-M-US-HSG-xx8-V4A 245642 43 12.500Language: FR, AZERTY KBDi-USB-M-FR-HSG-xx8-V4A 247563 43 12.500

Media converter / Switch Single Port Fibre Switchfrom 1 x 10/100Base-TX to 1 x 100Base-FXF/O Multimode 50 (62.5) / 125 µmcable length 5000 (4000) m1x RJ45, 1x SC connector

9721/13-11-14 220381 43 0.240

Single Port Fibre Switchfrom 10/100 Base-Tx (4 x RJ45 ports) to100 Base-Fx „Ex op is“ (1 x F/O port MTRJ),inc. VB-SC-MTRJ patch cable

SK-KJ1710 104236 43 0.200

4 Port Fibre Switch from100 Base-Fx „Ex op is“ (4 x F/O ports MTRJ) to10/100 Base-Tx (1 x RJ45 Port),inc. 4 x VB-SC-MTRJ patch cable

SK-KJ1740 168473 43 0.220

Connection panel with connector

for operating voltage (AC) and FOMaterial: V4A (SS316L)Dimensions (WxHxD): 240 x 230 x 121 [mm] (without connectors)Operating voltage connection:Hawke N-FP-X-B-P-S-X-X-S-A 4-Pol PowerFO connection:VB-FO-MIL-HMA-Blkhd-2CH-SC-1m

CON-xx8-AC-FO-00 244377 43

for USB connectionMaterial: V4A (SS316L)Dimensions (WxHxD): 240 x 230 x 121 [mm] (without connectors)USB connection:Harting USB connector

CON-xx8-USB-00 244378 43

Memory USB stick, intrinsically safe, 16 GB USBi-Drive-16GB 171401 43 0.500USB stick, intrinsically safe, 16 GBwith recovery and back-up function

USBi-Drive-16GB-Recovery 171402 43 0.500

Note: intrinsically safe USB stick for 5x6 and 5x8 devices onlyField cable MilTac Breakout FO cable, basic length 2 m,

SC plugs at both endsVB-FO-MIL-SC-SC-2m 202201 43 0.500

MilTac Breakout FO cable, additional length in metres, price per metre


Indoor Breakout FO cable, basic length 2 m, SC plugs at both ends

VB-FO-SC-SC-62V04G-2m 202203 43 0.500

Indoor Breakout FO cable, additional length in metres, price per metre

VB-FO-62V04G-xm 202204 43

Adapter for DIN rail mounting VB-SC-SC-jack 229271 43 0.200

Accessories and spare parts - for ET-/MT-5x7 platform MantaName Design Order Number Art.no. PS Weight

kgMedia converter / Switch Single Port Fiber Switch

from 4x 10/100/1000Base-TX to 1000Base-SXData transfer: FO SX: 1000Base-SX,Cable length 500 m, duplex LC connectors

SK-DRAG-GBIC-SX 222898 43 0.400

Quad Port Fiber Switchfrom 3x 10/100/1000Base-TX to 4x 1000Base-SXData transfer: FO SX: 1000Base-SX,Cable length 500 m, duplex LC connectors

SK-EL1000-2GU-3TX-4SX-opis 236644 43 0.400




A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Accessories and spare parts - for ET-/MT-5x8 Shark, ET-/MT_5x7 Manta and ET-/MT--5x6-A EagleName Design Order Number Art.no. PS Weight

kgKVM box Digital KVM over IP transmission unit

Remote monitoring and control, without software installationMulti-user system (up to 16 users simultaneously)Video resolution up to 2560 x 1600 pixelsConnection to the PC via DVI / USBData transfer via CAT cable up to 100 m

KVM-INFINITY-DUAL-2112T 229329 43 1.110

Digitale KVM over IP transmission unitRemote monitoring and control, Peer-to-PeerVideo resolution up to 1920 x 1200 pixelsConnection to the PC via DVI / USBData transfer via CAT cable up to 100 m

KVM-DIGITAL-IPEPS 235686 43 0.340

Desktop keyboard Ex i Language: DE, QWERTZ, 102 keys, USB interface KBDi-DS102W-USB-DE 229304 43 1.500Language: US, QWERTY, 102 keys, USB interface KBDi-DS102W-USB-US 222254◄ 43 1.500Language: NO, QWERTY, 102 keys, USB interface KBDi-DS102W-USB-NO 229303 43 1.500

Desktop mouse Ex i Optical desktop mouse, USB interface MSi-JM0100-USB 222255◄ 43 0.200Barcode scanner Ex i Handheld barcode scanner Zone 1, 2, 21, 22

Wired, without cable, 1D Barcode, 630 nmReading speed 500 Scans/secReading distance up to 800 mm

IDM160-ex 224079 43 0.200

Handheld barcode scanner Zone 1, 2, 21, 22Wired, without cable1D Barcode, 630 nm, stacked PDF barcodesReading speed 500 Scans/secReading distance up to 800 mm

IDM160-PDF-ex 224080 43 0.200

Handheld barcode scanner Zone 1, 2, 21, 22Bluetooth, wireless, 1D Barcode, 630 nmReading speed 500 Scans/secReading distance wireless up to 800 mm

IDM160-BT-ex 224087 43 0.260

Handheld barcode scanner Zone 1, 2, 21, 22Bluetooth, wireless1D Barcode, 630 nm, stacked PDF barcodesReading speed 500 Scans/secReading distance up to 800 mm

IDM160-BT-PDF-ex 223820 43 0.260

Base stations scanner Base station handheld scanner BT, Bluetooth, Zone 1Access and loading station without cableBluetooth, loading in Zone 1

IDM160-BT-BaseBT-Z1 224092 43

Base station handheld scanner BT, Bluetooth, Non-ExAccess and loading station without cableBluetooth, loading in safe area

IDM160-BT-BaseBT 224093 43

Base station handheld scanner BT, Non-ExLoading station without cableno Bluetooth, loading in safe area

IDM160-BT-Base 224094 43

Connection cable Connection cable for IDM160Interface RS-232, Ex i 5.6 Vcable length 1.8 m straight, Binder plug

VB-IDM160-xx6-RS232-SR-1.8m 224085 43 0.200

Connection cable for IDM160Interface RS-232, Ex i 5.6 VCable length 3.8 m, curled, Binder plug

VB-IDM160-xx6-RS232-SR-3.8m 224086 43 0.300

Connection cable for base loading station Z1Interface RS-232, Ex i 5.6 VCable length 1.8 m, straight, Binder plug


224102 43 0.200

Connection cable for base loading station Z1Interface RS-232, Ex i 5.6 VCable length 3.8 m, curled, Binder plug


224103 43 0.300

Extension cable for IDM160Cable length 6 m, straight

VB-IDM160-EXT-6m-Z1 224108 43 0.500

Extension cable for IDM160Cable length 4.5 m, curled

VB-IDM160-EXT-4.5m-Z1 224109 43 0.400

Tripod Tripod for IDM160Material: ABS (Acrylnitril-Butadien-Styrol)

IDM160-tripod 224106 43 0.200

Desk holder Desk holder for IDM160Material: ABS (Acrylnitril-Butadien-Styrol)

IDM160-Deskholder 224107 43 0.200

Power supply Power supply for base loading station Non-Ex DSP-IDM160-DC5V 224095 43 0.200Battery Replacement battery for IDM160-BT-ex IDM160-BT-ex-Lion 224091 43 0.200

Accessories and spare parts - for ET-/MT-5x6-A platform EagleName Design Order Number Art.no. PS Weight

kgKVM-Box Digital KVM switch for ET/MT-5x6

KVM ports to the PC:2 x PS2 connector (keyboard/mouse)1 x USB-B connector (keyboard/mouse to PC)1 x USB-B connector (virtual media to PC)1 x DVI-I connector (monitor, DVI/VGA)1 x Stereo jack (audio)Remote HMI connection:10Base-T, 100Base-Tx Ethernet

5x6-KVM-digital 202150◄ 43 1.000

DIN rail kitfor KVM box

Mounting kit DIN rail 5x6-KVM-DINrailKit 202193 43 1.000

Mounting kit1 KVM box

Mounting kit 48 cm rack (19“-Rack) Mounting rack for 1 KVM box

5x6-KVM-RackMountKit-1 202191◄ 43 1.000

Mounting kit 2 KVM boxes

Mounting kit 48 cm rack (19“-Rack) Mounting rack for 2 KVM boxes

5x6-KVM-RackMountKit-2 202192◄ 43 1.000


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7




Power supply Power supply in aluminium enclosureInstallation in Zone 1 and 2Input voltage: 90 ... 253 V AC, 50 ... 60 HzOutput voltage: 24 V DC

DSPq-120-24-block 222484 43 3.400

Media converter / Switch Single Port Fiber Switch from 10/100 Base-Tx (4 x RJ45 Ports) to 100 Base-Fx „Ex op is“ (1 x FO port MTRJ), inc. patch cable VB-SC-MTRJ

SK-KJ1710 104236 43 0.200

4 Port Fiber Switch from 100 Base-Fx „Ex op is“ (4 x FO ports MTRJ) to 10/100 Base-Tx (1 x RJ45 Port), inc. 4 x patch cableVB-SC-MTRJ

SK-KJ1740 168473 43 0.220

Supply and connection module

Module to connect readers to COM1Version for barcode reader IDM160Operating voltage: AC: 100 ... 240 V ACOutput voltage for reader 5.4 V Ex i

ReaderBox-054-AC-RS232 220595 43 3.000

Version for barcode reader IDM160Operating voltage: DC: 12 ... 30 V DCOutput voltage for reader 5.4 V Ex i

ReaderBox-054-DC-RS232 220596 43 3.000



USB stick 16 GB, with recovery and back-up function

USB-Drive-16GB-Recovery 171400◄ 43 0.500

USB extension and support with USB plug-in coupling for front IP65 or mounting inside field enclosure

VB-USB-Plug 104166 43 0.200

Note: intrinsically safe USB stick for 5x6 and 5x8 devices onlyField cable Patch cable MTRJ => SC (SK-KJ1710 --> EXICOM) VB-SC-MTRJ 104133◄ 43 0.200

Patch cable 3 m, 2 x RJ45 (SK-KJ1710 --> PC / plug) VB-SFTP-CAT5-Patch-3,0 104169 43 0.200Patch cable 3 m, open => RJ45 (EAGLE/Open HMI => plug)

VB-TP-CAT5-Exe-RJ45-Patch 104170◄ 43 0.200

Field cable copper, CAT5E, AWG23Price per metre

VB-TP-CAT5-AWG23 166458 43

RJ45 plug, metal, connectable in the field VB-RJ45-PLUG-180 166459 43 0.100Extension scanner interface to flanged socket M12 VB-SC-SC-jack 229271 43 0.200Adapter for DIN rail mounting SC --> SC VB-FO-MIL-SC-SC-2m 202201 43 0.500MilTac breakout FO cable, basic length 2 m, with SC plugs at both ends


MilTac breakout FO cable, additional length in metres, price per metre

VB-FO-SC-SC-62V04G-2m 202203 43 0.500

Indoor breakout FO cable, basic length 2 m, with SC plugs at both ends

VB-FO-62V04G-xm 202204 43

Accessories and spare parts - for ET-/MT-5x6-A platform EagleName Design Order Number Art.no. PS Weight

kg


A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7





A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

Thin ClientsSERIES IT-500 - Safe Area (Non-Ex)


SERIES IT-500 - Safe Area (Non-Ex) A7

05981E00


The SERIES 500 is ideal for network structures and virtual environments - it enables highly flexible access from each Thin Client to the ERP / MES system.

Platform> Manta (xx7 devices)

Applications> Industrial network structures / virtual

environments

Highlights> RDP, VNC and Netc@p possible, also LAN,

WLAN, Internet> With Remote Firmware for additional system

safety > Access from each operating station to

one / several PCs> Cost-effective hardware and central data

administration> 15" to 24"WU displays


A field system consists of at least one HMI unit and its integrated software.If the HMI unit is mounted inside an enclosure, this enclosure and all other accessories mounted insided it are part of the field system. To enable you to order a field system we have developed a product code that can represent all possible combinations of device, software, enclosure and accessories.The product code consists of alphanumerical characters and may look as follows:IT-567-TX-10000100027-211400000000The product code can be decoded as follows:

Decoding IT-567-TX - 10000100027 - 211400000000Definition Device type hyphen more detailed device





A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7

A7


Thin ClientsSERIES IT-500 - Safe Area (Non-Ex)


Type code field system IT-5x7 platform Manta (Part 1)Name Version Note Code Device design more detailed device design

IT- - - 0 0 0 0 -

Series Non-Ex ITDisplaysize


Ethernet 1x 10/100Base-TX copper Ethernet Standard TX1x 100Base-FX FO Ethernet Extra FX

Processor ATOM N270 Extra 1ATOM E3815 (available from Q3 2016) Extra 6

RAM 512 MB Standard 02 GB (for Delta V version or ATOM E3815 only) Standard 2

Display Typ Standard TFT Standard 0Data memory 1 GB SSD Standard 0

16 GB (for Delta V version or ATOM E3815 only) Standard 3Touch No touch Standard 0



Optionalinterface 1





No option 3 0

Enclosuredesign



Windows Embedded Standard 2009 (WES2009) & Remote Firmware (ATOM N270 only)

Standard 7


Extra 8

Windows Embedded Standard 7 (WES7), Remote Firmware and Delta V

Extra H

Notes:

Documents

Operating and Monitoring Systems - CPIA7 156 2015-10-01·KP00·III·en Preferred products – in stock or available at short notice HMI Technologies for all Applications Operating