-
ONLINE ONLYAUCTION
Sale Presented By:
GE CapitalJim Hanley, Equipment Remarketing Servicesyy83 Wooster
Heights Rd., Danbury, CT 06810P. 203-546-4491
E:[email protected]
Under Management of:Corporate Office:40 Daniel Street, Ste
2Farmingdale, NY 11735631-454-1766 Fax: 631-454-1779
www.kosterindustries.com • e-mail: [email protected]
Online Bidding ThroughLive Interactive Webcast Auctions
FEATURING: (2) Plasma Arc Welding Systems • Turret Lathes, Incl.
Warner & Swasey 4A • Lathes • CNC Horizontal Machining Center •
Air Compressors • Paint Booth • Late Model Dust Collectors •
Material Handling • Roll-Up Doors • Racking • Tremendous Amount of
Shop Support & Raw Material • Office Furniture and More!
ONLINE BIDDING ENDS: Thursday, July 14th, 2016 at 1:00 p.m.
(EDT)INSPECTION: Wednesday, July 13th By Tour Only at 10:00 a.m.
and 2:00 p.m.
To Register For This Auction, Please Visit
www.kosterindustries.com
Surplus to the Ongoing Needs of:
GE OIL & GAS85 Bodwell Street
Avon, Massachusetts 02322
Complete Plasma Arc Welding Cell
Warner & Swasey Mdl. 4A Saddle-Type Turret Lathe
Harrison Mdl. M500 21" x 60" Engine Lathe
46" Bullard Dynatrol Vertical Turret Lathe
-
Sale Presented By: Corporate Office: 40 Daniel Street – Suite 2,
Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779Boston Office:
978-474-4442 • Fax:978-474-4673www.kosterindustries.com • e-mail:
[email protected]
PLASMA CUTTING & WELDING CELLSPlasma Arc Welding System,
consisting of:
• Boom with Approximately 48" Cross Travel• Jetline Mdl.
ZB-500A-SCD Welding Positioner,
with 12" dia. 3-jaw chuck, S/N: 970243• Thermadyne Starweld
Plasma Transferred Arc
Hardfacing System, S/N: 4533• Chiller• Thermal Dynamic Plasma
Unit• Lincoln Electric Invertec V160-T Pulse Welder
Plasma Arc Welding System, consisting of:• Jetline Mdl.
SWC-30-10SCD Boom, with
approximately 96" cross travel, S/N: 900155• Ransome Mdl. 10P
Welding Positioner, with
30" dia., 1,000-lb. capacity, S/N: 980118• Presto Mdl. X3W36-60
6,000-Lb. Capacity
Lift Table, S/N: V55360-1/1261584/1• Stellite Mdl. CFT-150
Refrigerated Recirculator• Stellite Coatings Mdl. SW1 (Thermadyne)
Starweld
Plasma Transferred Arc Hardfacing System, S/N: 990107 (1998)
• ESAB Mdl. SVI300i CVCC Plasma Unit• Lincoln Electric Invertec
V350 Pro Welder, digital• Millermatic Weld Oscillator
Complete Plasma Arc Welding Cell
To Register For This Auction, Please Visit
www.kosterindustries.com
TURRET LATHESWarner & Swasey Mdl. 4A Saddle-Type Turret
Lathe, with 9" hole thru spindle, 24" dia. 3-jaw chuck, 6-position
turret, 10–526 RPM, S/N: 2765688 (Lot 736; M-3550)
Warner & Swasey Mdl. 2A Saddle-Type Turret Lathe, with 4"
hole thru spindle, 18" dia. chuck, 6-position turret, 16–1,117 RPM,
S/N: 2766792 (Lot 797; M-3470)
VERTICAL TURRET LATHEBullard Dynatrol 46" Vertical Turret Lathe,
with (1) turret head, (1) ram head, pendant controls, Acu-Rite
digital controls, inch/metric threading, S/N: 33262
Warner & Swasey Mdl. 4A Saddle-Type Turret Lathe
46" Bullard Dynatrol Vertical Turret Lathe
Clausing Colchester 15" x 48" Engine Lathe
LATHESHarrison Mdl. M500 21" x 60" Lathe, with 21" swing x 500
m/cc, 12" dia. 3-jaw chuck, Acu-Rite digital readout, inch/metric
threading, spindle speeds 31–1,600 RPM, 3" hole, threading dial,
micrometer stop, 4-jaw chuckClausing Colchester 15" x 48" Geared
Head Engine Lathe, with spindle speeds 25–2,000 RPM, Acu-Rite
digital readout, 10" dia. 3-jaw chuck, inch/metric threading, 4-jaw
chuck, steady rest, S/N: 6/0055/23579 (no tailstock)
-
CNC HORIZONTAL MACHINING CENTERCincinnati Milacron Mdl. T-20 CNC
Horizontal Machining Center, with dual 25" x 25" pallets, Siemens
Acramatic 950 CNC controls, chip conveyor, 120-position automatic
tool changer, S/N: 3622A2190-0013
MILLING MACHINEWells Mdl. 747 Index Vertical Milling Machine,
with 9" x 48" table, power feed, spindle speeds 50–4,200 RPM, S/N:
20040
PRESSESDenison 4-Ton Capacity Multipress, S/N: 135Dake 25-Ton
Capacity Garage Type Arbor Press, with 33" between uprights, S/N:
99436
SPLINE MILLERHurth Type KF329 Spline Miller, with 18" x 90"
overall table, S/N: 22211
PARTS WASHERGraymills Mdl. THS3626SLP-Y Parts Washer, 1/2HP,
with 27" x 36" x 24" inside dimensions, S/N: 210325
MULTI-SPINDLE DRILLLeland Gifford 6-Spindle 14" Floor-Type Drill
Press, with 15-1/2" x 69" table
SAWSWadkin Bursgreen Mdl. BH7 27" Vertical Bandsaw, with 30" x
30" table, S/N: BH7-78250DeWalt Mitre Saw, with conveyorRidgid Mdl.
R4120 Mitre Saw, with roller conveyorEverett Mdl. 14-16 Abrasive
Cutoff Saw, S/N: 782-1
Cincinnati Milacron T-20 CNC Horizontal Machining Center
Hurth Type KF329 Spline Miller
Everett Abrasive Cutoff Saw
Online Bidding Through
Live Interactive Webcast Auctions
To Register For This Auction, Please
Visitkosterindustries.com
PAINT BOOTHCol-Met Spray Booth, with open top, 18' x 14' x 20'
inside dimensions, Eaton SVX9000 transformer, control panels,
explosion proof lighting, dual doors, side doors, small paint room
for mixing
OVENS2-Door Drying Oven, with 6' x 7.5' x 6' inside
dimensions
Blue M Oven, single door, with 24" x 24" x 20" inside
dimensions
Col-Met 18' x 14' x 20' Paint Spray Booth Blue M Single Door
Oven
Quincy Mdl. OGD-30 30HP Air Compressor
LeRoi Mdl. W60SS 60HP Air Compressor Airtek Smart Cycle Mdl.
SC500 Air Dryer
Quincy Mdl. QSI-90 20HP Air Compressor
2015!
AIR COMPRESSORSQuincy Mdl. QSI-245ACA31EC 50HP Skid Packaged
Rotary Screw Type Air Compressor, with digital display, enclosure,
S/N: 96937HQuincy Mdl. OGD-30 30HP Skid Packaged Rotary Screw Type
Air Compressor, with 75-PSIG, display, enclosure, 6,426 fully
loaded hoursQuincy Mdl. QSI-90 20HP Skid Packaged Rotary Type Air
Compressor, with 125-PSIG, air cooled with display, enclosure,
1,255 fully loaded hours, 3,651 total hours, S/N: UTY101211
(2015)LeRoi Mdl. W60SS 60HP Skid Packaged Rotary Type Air
Compressor, with 125-PSIG, 250-CFMDeltech Mdl. HGE150 Non-Cycling
Refrigerated Compressed Air Dryer, with 150-SCFM, R-134A
refrigerant, S/N: HG150A1151004005Airtek Smart Cycle Mdl. SC500
Cycling Refrigerated Compressed Air Dryer, with 520-SCFM, 200-PSIG,
S/N: 05F-D02066(3) Air Receiving Tanks
Under Management of:GE Capital Jim Hanley, Equipment Remarketing
Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491
E:[email protected]
-
Sale Presented By: Corporate Office: 40 Daniel Street – Suite 2,
Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779Boston Office:
978-474-4442 • Fax:978-474-4673www.kosterindustries.com • e-mail:
[email protected]
MATERIAL HANDLING(2) Landoll Bendi Mdl. B30/42E1800 Series IV
3,000-Lb. Capacity Narrow Aisle Electric Forklift Trucks, with
articulating front end, 200° front articulation, 3-stage mast,
S/N’s: B40/48-212C-02453
HOISTSTremendous Quantity of Single Girder and Jib Cranes, up to
7.5-ton capacity jib arms and hoists, incl. Gorbel (some free
standing)16,000-Lb. Capacity Spreader Beam
Partial View of Cranes and Hoists – up to 7.5-ton capacity
(1 of 2) Landoll Bendi Mdl. B30/ 42E1800 Series IV 3,000-Lb.
Narrow Aisle Articulating Forklift Trucks
RACKING & RETRIEVAL SYSTEMS• White Storage and Retrieval
System,
with (4) sections – (40) rows/(20) high• (2) White Integral Pod
Controllers,
S/N’s: 522-S109264-422-0115-120; 522-S109264-422-0114-120
• (3) White Mdl. 680 Motor Controllers• White Aisle Saver System
for
Pallet Storage• (6) Rows – each dual sided with
(9) Sections each side, 4- and 5-high, 8,945-lb. per shelf
uniform load
Large Quantity of Heavy Duty Adjustable Steel Pallet Racks, 96"
cross beams (4,080-lb. per shelf), 112" cross beams (8,945-lb. per
shelf)
White Storage and Retrieval System
White Aisle Saver Pallet Rack Storage System
HYDROSTATIC TESTERS(2) Kenett Corp. Hydrostatic Testers, S/N’s:
KT3574; KT3575
ONLINE BIDDING ENDS: Thursday, July 14th, 2016
at 1:00 p.m. (EDT)INSPECTION: Wednesday, July 13th
By Tour Only at 10:00 a.m. and 2:00 p.m.
DUST COLLECTORSDonaldson Torit Mdl. DF03-6 Dust Collector,
6-bagDonaldson Torit Mdl. DF02-4 Quick Delivery Dust Collector,
S/N: 4237603Cincinnati Fan Mdl. HDB1-160 Dust Collector, with 20HP
motor, S/N: 716673
Donaldson Torit Mdl. DF03-6 Dust Collector
Donaldson Torit Mdl. DF02-4 Dust Collector
View of Hormann Flexon Roll-Up Doors
AUTOMATIC ROLL-UP DOORSHormann Mdl. SM1600L Flexon Doors, 8'
wide x approximately 150" high, S/N: 1402921215(2) Hormann Mdl.
SM1600L Flexon Overhead Automatic Doors, 84" wide x 96" high,
S/N’s: 20090; 20090 (2012) Online Bidding Through
Live Interactive Webcast Auctions
-
Sale Presented By:
GE CapitalJim Hanley, Equipment Remarketing Servicesyy83 Wooster
Heights Rd., Danbury, CT 06810P. 203-546-4491
E:[email protected]
Under Management of:Corporate Office:40 Daniel Street, Ste
2Farmingdale, NY 11735631-454-1766 Fax: 631-454-1779
www.kosterindustries.com • e-mail: [email protected]
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 16.5%
Buyer’s Premium will apply on all purchases. Payment must be made
by certified funds or wire transfer. Company or personal checks
will be accepted only if accompanied by a letter from the payor’s
bank guaranteeing unqualified payment to Koster Industries Inc. All
checks must be made payable to the order of Koster Industries Inc.
Direct bank wire transfers to the account of Koster Industries Inc.
on balances due will be accepted with prior arrangement. No lot may
be removed until complete settlement is made.IMPORTANT NOTICE:
Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed
or implied, as to the accuracy of the information herein contained.
It is for this reason that buyers should avail themselves of the
opportunity to make inspection prior to the sale.IMPORTANT NOTICE:
Nothing herein shall be construed as (i) constituting the creation
of an agency, partnership, joint venture, fiduciary or similar
relationship between GE and any person; (ii) an approval or
commitment to sale by GE to any person; and all transactions are
subject to final investment/compliance approval by GE and the
execution of mutually satisfactory definitive documentation; (iii)
any guarantee or promise of pricing terms or availability thereof
which may fluctuate or cease to be available depending on any
change in the relevant market. All sales of available equipment
will be “as is”, “where is”, with all faults, without recourse or
warranty of any kind or nature, express or implied; and subject to
detailed terms and conditions of sale of the equipment
owner/seller.
To Register For This Auction, Please Visit
www.kosterindustries.com
QS-0032708
Large Quantity of Vidmar and Lista Cabinets
MISCELLANEOUSFlexmax Multi-Smart Suction ArmsJet Combo 6"
Belt/Disc SanderTaft Pierce Bench CenterGranite Surface Plates, up
to 36" x 48" x 8"(2) Paint ShakersLarge Quantity of Stanley, Vidmar
and Lista Cabinets2-Door Heavy Duty Storage Cabinets
MISCELLANEOUS SHOP SUPPORTINCL.: Hand Tools, Hydraulic Pallet
Jacks, Hose Reels, Hoppers, 2-Wheel Hand Trucks, Cantilever
Racking, Chain Falls, Chain Hoists, Stainless Steel Racks, Tool
Chests, Work Benches and Vises, 2-Door Storage Cabinets, Lift
Tables, Parts Bins, Steel Clothes Lockers, Banding Carts, Conveyor,
Pedestal Fans, Tool Holders, Tooling, Electric and Pneumatic Tools,
Step Ladders, Carbide Inserts, Flame Proof Storage Cabinets, Shop
Furniture, Hose, Drills, Taps, Reamers, Milling Vises, C-Clamps,
Etc.
Partial View of Office Furniture
OFFICE FURNITURE & EQUIPMENTINCL.: Partitioning, Desks,
Chairs, Lateral File Cabinets, Bookcases, 4-Drawer File Cabinets,
Secretarial Chairs, Office “Cubes” and Work Centers, 2-Drawer File
Cabinets, Arm Chairs, Lunch Room Tables and Chairs, Microwaves,
Refrigerators, Executive Offices, Reception Area, Leather Chairs,
Modular Furniture, HP Designjet T1200 Post Script Printer, Etc.
Online Bidding ThroughLive Interactive Webcast Auctions
ONLINE BIDDING ENDS: Thursday, July 14th, 2016
at 1:00 p.m. (EDT)INSPECTION: Wednesday, July 13th
By Tour Only at 10:00 a.m. and 2:00 p.m.
Surplus to the Ongoing Needs of:
GE OIL & GAS85 Bodwell Street, Avon, Massachusetts 02322
