16
STARWELD Competitive Target: ______________________________________________________________________________ Tracker

STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

STARWELD

Competitive Target:______________________________________________________________________________

Tracker

Page 2: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

WARRANTY

Starweld Warranty

Starweld Warranty vs. Tracker Warranty

Tracker Warranty

• Mod V and Deep V models have a transferable Limited

Lifetime Warranty that covers all external welds and a Limited Five Year Warranty covering the hull, interior ribs and transom.

Page 3: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

ALUMINUM BOATS LIMITED LIFETIME WARRANTYTRACKER® Marine, L.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent stated herein. This limited warranty is extended to the original retail purchaser and is subject to the following conditions:1. When you pick up your boat through a TRACKER Dealer, you must sign the warranty registration forms delivered to you at the time of purchase. THE DURATION OF THIS LIMITED WARRANTY IS ONE (1) YEAR FROM THE DATE OF PURCHASE BY THE ORIGINAL PURCHASER. IN ADDITION, TRACKER WARRANTS: A) THAT, FOR A PERIOD OF FIVE (5) YEARS FROM THE DATE OF ORIGINAL PURCHASE, THE HULL, THE INTERIOR RIBS, AND TRANSOM ARE FREE OF DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL RECOMMENDED USAGE AND WITH PROPER MAINTENANCE; AND B) THAT, FOR THE LIFE OF THE BOAT, AS LONG AS IT IS OWNED BY THE ORIGINAL PURCHASER, THE EXTERNAL WELDS ARE FREE OF DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL RECOMMENDED USAGE AND WITH PROPER MAINTENANCE. This limited warranty applies only to the portions of the boat manufactured by TRACKER.

Tracker Warranty

Starweld Warranty vs. Tracker Warranty

Page 4: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Starweld Transom and hull design vs. Tracker

Tracker transom a 20 deadrise at transom which has a tendency to list when you put a large amount of weight in one specific corner of the aft section. Also the reverse chine only runs a third of the length of their hull theen accompanied by their pressed in performance strakes.

Starweld has a 17 degree deadrise at transom for a very stable platform at the aft section of the boat with less degree of listing when weight is in one corner. We also have a full length reverse chine which runs from the stern to the bow of the boat that directs water down and away from the boat for quicker planing, improved cornering and a smoother, drier ride overall.

Page 5: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Starweld Two Piece Hull /Sides vs. Tracker Two Piece Hull

Starweld hulls are two piece hull w/ sides attached to each piece. They are assembled by welding each half of the hull / side combo piece of .100 gauge into a full length extrusion and then welded from the inside to give a clean look on the hull and add superior strength from within accompanied with the TBC – (Torsion Beam Construction) stringer system.

Tracker uses a two piece hull and two side for a total of 4 pieces which are then place into an extrusion and welded plus the transom which requires much more welding to make the hull complete. This creates more opportunities for weakness and inconsistency throughout the hull. The finish is sub –par when you look at there boat and welds compare to a Starweld.

Page 6: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Starweld Hull Construction vs. Tracker

Starweld Torsion Beam Construction is superior to our competition for durability and strength. Instead of flat I-Beams you find on many boats Starweld uses the exclusive Starweld Torsion Beam Construction (TBC) Stringer system for exceptional strength and durability against shock absorption from waves. This bow is also considerably stronger due to our unique heavy duty machine formed ribs.

Tracker uses an extruded welded in keel support that assist in taking flex out of the hull and removes pressure where the two hull halves meet. Not nearly as strong as ours or due to our exclusive design.

Page 7: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Starweld Hull Construction vs. Tracker

STARWELD: Blown – Up View of TBC and heavy duty machine formed ribs inside the hull.

Page 8: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Starweld 1900 DC vs. Tracker V-18 Combo

SPECIFICATIONS Starweld 1900 Tracker Targa V-18 Combo

Max HP 150 150

Fuel Cap (gal) 37 40 Gal

Interior Depth 27” 28”

Gunnel Closed – Wide Closed - Wide

Overall Length 18’6” 19’ 1” inc. swim platform

Beam 94” 102”

Dry Weight 1390 1558

Max Persons 7 6

Max Capacity (lbs) 1700 1650

Transom Height (in) 20” 25”

Rod Storage In floor/Port and STB side stor. In Floor/ Port and STB top load

Aluminum Gauge .100” 100”

Livewell Bow 12 Gal – Stern 17 Gal. Bow 19 Gal-Stern 11 Gal.

Length on Trailer 21’6”20’6” w/swing tongue open/motor

down

Page 9: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

STANDARD FEATURES Starweld 1900 DC Tracker Targa 18-Combo

Gauges Tach, Speedo, Fuel, VoltTach, Speedo, Fuel, Volt, Water Pressure

Tilt wheel/Hydraulic Steering Yes / (NO) Anti – Feedback Standard

Steering Wheel Type Deluxe wheel Padded sport steering wheel

Deadrise at Transom 17 degree 20 degree

Kicker Motor Fuel Line Yes Yes

Two Piece Hull Yes Two piece hull and two sides

Seat Pedestal Bases 67 only six functional at one time

Adjustable Drivers Seat- Slider Standard Standard

Pre Rig and Outboard Brands All Major Brands Mercury

Starweld 1900 DC vs. Tracker Targa V-18 - Combo

Page 10: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

STARWELD – Stylish black console cap which is appealing to the eye. Automotive inspired design. Includes speedometer, tachometer, voltmeter, fuel gauge, AM-FM stereo w/ J-port connector and tilt hydraulic steering as standard features.

TRACKER – Glossy plastic grey console which is less appealing to the eye. Integrated drink holder. Includes speedometer, tachometer, voltmeter, fuel gauge, AM-FM/CD stereo w/MP3 jack and tilt hydraulic steering as standard features.

Starweld 1900 DC Console vs. Tracker Targa V-18 Combo

Page 11: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Starweld 1900 DC Rod Storage vs. Tracker Targa V-18 Combo

Starweld has lockable in floor rod storage for 6 –rod combos up to 8’in length plus has port and starboard side rod storage as well. Side storage makes for a much stronger gunnel and plenty of room to mount track, rodholders and downriggers.

Tracker has an open in floor compartment which can hold rods but is not dedicated to rods therefore making it a sloppy storage system. They have top load rod storage on each side but again very poor storage supports. Plus tough to mount track, rod holders and downriggers due to door.

Page 12: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Stylish Split Stern Flip Up Bench Seat/Aft Casting Platform: This can be used in numerous configurations.-Upright bench to allow seating for up to 7persons in combination behind the windshield with 4 fishing seats in the cockpit.-Can be used in a split configuration 70/30 for easy access in and out of the stern section of the boat.-Can be used with both sections down as huge aft casting platform.

TRACKER- Small individual flip up bench seats very thin back with backrest pad and thin seat to sit on.-Casting platform flods down as one piece only. No Split like on the Starweld model.

Starweld 1900 DC Rear Flip Seat vs. Tracker Targa V-18 Combo

Page 13: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Starweld Bow Cushion set covers complete bow seating areas with padded bolsters and back rest and it comes standard on the 1900 DC.

Tracker comes with padded backrest and small cushions that cover roughly 40% off the bow area. They do not have padded bolsters running on the inside of the gunnels in the bow. This comes standard on the 18 – Combo but is an upgrade option on the 18-WT model.

Starweld 1900 DC Walk-in Bow vs. Tracker Targa V-18 Combo

Page 14: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Starweld 1900 DC Seats vs. Tracker Targa V-18 Combo

Starweld comes with 3 premium fishing seats that feature high density foam, seat back side support, seat bottom side support and no exposed hinges. Ergonomically designed to fish all day without back fatigue. Stylish color that is nuetral and standardized which makes it easy to order additional seats at any time. This model comes with a total of six 6 pedestal bases to place your seats where you like when running or fishing.

Tracker comes with a total of three seats as well that are composite frames. They are also multi colored seats so it makes it difficult to reorder seats if the model changes color in the near future. They have a total of 5 pedestal base locations.

Page 15: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Starweld Media Outlets and Links

Facebook-www.facebook.com/starcraftmarine

STARWELD WEBSITE – VIDEO LINKS:http://starcraftstarweld.com/showroom/1900-series/1900

http://starcraftstarweld.com/showroom/1900-series/1900

http://starcraftstarweld.com/showroom/1900-series/1900

Page 16: STARWELD Competitive Target - Dealer Edge vs Tracker.pdfL.L.C. (“TRACKER”) warrants that your boat was manufactured free of defects in materials and workmanship, to the extent

Thank YouBYE!

SEE YOU ON HOT SPOT WHEN YOU GET THERE!

Tracker Targa V-18 Combo

http://starcraftstarweld.com