ON THE MOVE WITH WEBERBICYCLE TRAILERS – ACCESSORIES – HITCHES

PAgE 2

INNOVATION AND QUALITYINTELLIGENT PRODUCTS ALL ABOUT BIKES.

fROM THE STARTSince 1985 we have dedicated ourselves to develop-ing high quality and innovative products for people who ride bikes. Today, exactly twenty-five years later, a lot has changed. Yet one thing has remained the same with all the de-velopments: our efforts to design intelligent products with ultimate safety and durability.

MILESTONE 1992The Ritschie1 appears on the market. Its innovative features at the time became – and still are – stand-ard in part to many other trailers:the fixed three-layer aluminium chassis and the first suspension in a child trailer for more safety and comfort, the two-part bicycle hitch and a touring top hard shell cover for changing your child trailer into a load carrier.

MILESTONE 1997Presenting its successor: the Ritschie². Once again with many innovative ideas, like the first child trailer brake system suitable for serial produc-tion. Since 1997 there have also been new features in the form of the 5-point harness with its own childproof catch, plus the universally usable Weber baby shell. With the first skater set and a third fully functional wheel introduced in 2000, you can also jog and skate with the Ritschie².MILESTONE 2003The Monoporter is introduced and promptly wins the ISPO Brand New Award. In the same year Weber presents the Ritschie² SE “Sport Edition”. The Ritschie² S BIKER is the winner of the big test by Stiftung Warentest.

MILESTONE 2008Move to our own new production facilities.

PAgE 3

THE BEST CONNECTIONBesides bike trailers and accessories, Weber components enjoy increasing acceptance with customers and manufacturers, above all the Weber hitch system. Since 2004 Weber has been the world's first manufacturer to offer a full range of hitches for all trailer types and applications. With HitchUp, Weber provides complete conversion sets for the first time, with which all conventional trailers can be retrofitted to the Weber system. Some reputable bike manufacturers have already modified their frames so they can be directly adapted to the Weber hitches.

ENVIRONMENT AND RESPONSIBILITYWe do not see our products as part of a throw-away society, but rather as quality products with the highest value retention. Furthermore, we consciously focus on handling raw materials and our resources responsibly. For us, diligent production in germany is a basic requirement for a consistent quality level and for our social responsibility.

On this note,

Herbert Weber Managing Director

CONTENTS: Ritschie child trailers

Weber load carriers

Weber baby shell

Monoporter luggage trailers

Weber hitch systems

Polygons

Weber conversion kits

PAgE 4

THE RITSCHIE

ON TOUR WITH THE CHILDRENChildren want to be with you wherever you go. With the Ritschie² they can do so in comfort and above all safely. Because Weber child trailers have been setting standards in terms of safety, comfort and versatility for two decades.

High grade materials and careful manualproduction guarantee the high quality as well as the above-average value retention. The Touring Top (accessories) gives you the option of also using your Ritschie² as a load carrier after or during your children's early years.

Rits

chie

² BIK

ER

UNIQUE: THE ADJUSTABLE SEATThe adjustable Ritschie² padded seat ideally adapts to your child's body due to its flexibility. This means it provides ergonomic comfort and safety like a car seat.

ExTREMELY SAfEWhen it comes to the safety of your children, there are no compromises at Weber! The Ritschie² thus offers extensive features as standard:

Safety chassis with all-round impact protection. Comprehensive back protector due to fixed padded seat with integrated aluminium reinforcement.

Rollover protection due to roof braces, seat and patented safety padded roof forming a composite. good road position and low tendency to overturn.

Safety pennant and 6 reflectors in total.

fEATURES

PAgE 5

Extremely stable three-layer aluminium chassis.Undercarriage cushioned by elastomers.Freely insertable head support + head support safety device.5-point harness with KidSafe belt catch.Adjustable padded seat with rest position.Waterproof canopy with large, tinted windows (SPF 16). The material keeps out 95% of harmful UV radiation.Rain cover plus separate insect net. Cotton fleece cover, moisture-wicking, washable & conta-minant-free in accordance with Ökotex standard.High quality 16SDSq plastic wheels with stainless steel axle, each with twin industrial bearings.Lockable Weber drawbar incl. “E” hitchQuick releases for drawbar and wheels.Dual disc brake as a parking brake and service brake when jogging or skating.Rear luggage space.Can be folded down to chassis size without tools.

Rits

chie

² SK

ATER

The Weber Ritschie² is available in the basic version Ritschie BIKER or as the sport version Ritschie SKATER with extra 3rd wheel, adjustable push bar and patented Weber steering. Both versions come in a choice of the canopy colours yellow and orange. Of course each version can be retrofitted to make it a SKATER. You also have the option of leaving out integrated features from the basic versions (e.g. the disc brakes). More information about the Ritschie: weber-products.de/ritschie

Overall width 820 mmOverall height 1020 mmOverall length with drawbar 1360 mmHead room/ leg room 630 mm / 600 mmInterior width (max) 700 mmPacking dimensions (l x w x h) 800 x 720 x 410 mmTare weight approx. 16.5 kgPermitted payload (max) 50 kg

Can be folded down to chassis size quickly and without tools:800 x 720 x 410 mm.

PAgE 6

THE RITSCHIE easy

PROTECTED WITH YOUThere is almost nothing better than cycling through the countryside with the whole family. If the children are not yet big enough to join you on their own kid's bikes, a child trailer is the ideal solution. The bike trailer is altogether best suited for a trip to the countryside. Using a trailer, the children can also join you safely for everyday trips to playschool, sports and shopping.

Rits

chie

² EAS

Y

SAfETY fIRSTThe affordable version of the popular Ritschie con-cept, with equally high safety and comfort features:

Safety chassis with all-round impact protection. Comprehensive back protector due to fixed padded seat with integrated aluminium reinforcement.

Rollover protection due to roof braces, seat and patented safety padded roof forming a composite. good road position and low tendency to overturn.

Versatile use due to add-on sets Quality as a guarantee for value retention

PARKING BRAKE

The standard parking brake for the Ritschie easy and the Ritschie Touring is a simple and safe brake. It is operated by foot and acts on both wheels.

PAgE 7

Easy to fit plastic cover

Cargo protected from water

Cargo secure, as cover can be locked. Opened cover stays in position by means of a pneumatic spring Practical roof railing to tie down additional luggage

Rits

chie

² TO

URIN

G Overall width 820 mm

Overall height 740 mmOverall length with drawbar 1360 mmVolume 150 litresTare weight approx. 16.5 kgPermitted payload (max) 50 kg

SPECIAL DESIGNS

Special customised designs of load carriers can be pro-duced for you on request using our components, e.g. for transportation in factories or for bike couriers. Illustration: ZARGES box with interior dimensions 750x550x380mm and plastic box with spring-mounted Weber-chassis, removable Weber low/ hand drawbar, foldable 2-leg stand.

RITSCHIE TOURINGThe Touring Top gives you the option of also using your Ritschie² as a load carrier after or during your children's early years. Ideal for everyday use and for trips on holiday.

ACCESSORIES fOR RITSCHIE

PAgE 8

RITSCHIE REAR PANNIERTO ExTEND THE LUGGAGE SPACE

RITSCHIE PROTECTIVE COVERDURABLE POLYESTER MATERIAL WITH fLUOROCARBON COATING

RITSCHIE TOURING TOPOf COURSE YOU CAN RETROfIT YOUR RITSCHIE WITH THE TOURING TOP AT ANY TIME.

Our Touring Top makes the Ritschie² into a lockable and spring-mounted load carrier with approx. 150 litres of storage space.It has a pneumatic cylinder as standard, making it easier to open the plastic lid, and a roof railing to tie down additional luggage.

Whenever you don't need it, simply put it underneath: this flexible garage keeps the dirt and weather off your Ritschie. The expander straps are used as a means of windproof fastening. Colour: dark blue

got a lot to pack? No problem with the big Ritschie² rear pan-nier. The shoulder strap allows it to be used as an ideal, mobile rucksack. Available in yellow or orange for all Ritschies. (Subject to alterations)

PUSHCHAIR SET fOR RITSCHIE EASY

The set consists of the front wheel with fastening clip and the push bar with adaptor. The push bar for the Ritschie easy can be quickly and easily taken out, turned round and put back into the adaptor. This gives you two different heights for push-ing. The pushchair set is suitable for use on paved and even paths.

PAgE 9

For Ritschies built from 2003 onwards, the Ritschie easy or as a replacement: the 6-part seat cover set made of cotton for retrofitting. Washable, moisture-wicking and contaminant-free in accordance with Ökotex standard.

SUN SHADE fASTENERfOR fASTENING SUN SHADES EASILY

RITSCHIE HEAD RE-STRAINTWITH HEAD RESTRAINT SAfETY DEVICE

RITSCHIE fLEECE SETfOR SOfTER SEAT COMfORT

This set acts as a lateral head restraint for your children. It is inserted into the backrest of the Ritschie and fastened with a safety catch without much effort. (Standard on Ritschie-Biker and Ritschie-Skater). The head re-straint safety device is also avail-able separately for retrofitting.

When it gets too bright for your little ones: these simple clips can be used to attach all conventional sun shades quickly and easily. (Shades available in specialist shops and DIY stores)

ELASTOMER SPRINGS To make the Ritschie softly sprung, elastomer springs are located between the wheels and chassis. The Ritschie comes with black elastomer springs as standard, which are designed for a payload of up to 50 kg. When small children are being transported, we recommend the softer springs.Red elastomer springs are suitable for weights up to 25 kg.

THE WEBER BABY SHELL

EPP MATERIAL INfORMATION: Expanded polypropylene is a high quality and yet very light foam material. It is resistant to breakage and weather and features outstanding energy absorbing properties.Thesebenefits make EPP an ideal material for motorbike and bike helmets and ensure the safety of your child.

WITH YOU AT ALL TIMESAnybody who wants to take babies in a child trailer is always faced with the same problems:the seat in the trailer is not suitable for babies and standard baby carriers are often bulky, too heavy and cannot be properly fastened in.

The Weber baby shell, on the other hand, has been purely designed for taking babies with you in the trailer. It is made out of high quality EPP foam mate-rial. This material features the ultimate dimensional stability with a low weight and is therefore employed in safety technology.

The shell comes in two varieties of cover: fleecy cotton in ecru or light grey and high quality textile leather in grey/marine. The covers are removable and can be easily cleaned in the washing machine.

SAfE EN ROUTEChildren in a trailer must always be buckled up. In order that they remain so during the journey too, the baby shell is equipped with the Weber KidSafe belt catch. This special design cannot be opened by children on their own.

THE SEAT SIzE REDUCERAccessory for the baby shell especially to give additional head support for small babies.The ergonomic and comfortable reclining position relieves the back and neck area. The highside walls give additional hold.

QUICK AND EASYUsing a clever, easy to handle belt tensioning system, the Weber baby shell can be safely and easily fastened in all conventional trailers. Its narrow design also allows adequate space for a second child or a second baby shell. (Usage as a twin pram)

PAgE 10

Use 1st to 9th month, up to 9 kg weightDimensions (l x w x h) 680 x 270 x 190 mmWeight 550 gMaterial EPP (expanded polypropylene)Cover fabric cotton fleece or textile leatherMeets EU standards EN 71-1, 71-2, 71-3, 12790 re. 5.8.7

fEATURES

PAgE 11

Shell made of high quality and contaminant-free EPP foam material.

Space-saving shape – only 27 cm wide.

Minimum weight – only 550 g.

Adjustable 3-point harness.

Childproof KidSafe belt catch.

Durable and washable (fleece) cover – in a choice of cotton or textile leather.

Fleece and microfibre cover contaminant free in accordance with Ökotex Standard. Moisture-wicking.

Can be used in nearly all conventional child trailers.

Simple installation without tools.

THE COSY BLANKETThe cosy blanket from Weber was designed especially for babies in child trailers. The double layer blanket made of high quality fleece material keeps babies comfortably warm. Specially adapted for the WEBER baby shell, cord string at top end, mummy function, 90 x 90 cm, wash-able at 30°

SUPPORT PAD:In order to be able to safely fasten your Weber baby shell in place, on some

trailers it is necessary to use a support pad in the foot well.

The blow-up support pad fulfils this task ideally, weighs almost nothing and can be stored without taking up much space.

PAgE 12

THE MONOPORTER

THE SPORTY WAYBefore embarking on a bike trip, the question of where to put the luggage often crops up. Panniers and rucksacks do not hold much and impair the rider and wheel. Although cargo trailers are a good alternative, they are usually heavy and awkward when off-road. Especially for these needs we have developed the Monoporter as a thoroughbred lug-gage trailer for bike trips and bike journeys.

By reducing it to only one wheel, the Monoporter is extremely narrow and cannot turn over even in the tightest of curves, as its double hitch to the pulling wheel makes it lean sportily into the bend. The serial suspension with steel spring element protects the load from impact and ensures a clearly improved road position as well as better cross-country mobility.

THE SPACE-SAVER The Monoporter can be folded to the size of a suitcase with a few simple hand movements. It will therefore fit into any car boot and can be checked in at the airport as normal baggage.

WEIGHS LITTLE, BEARS A LOTFor long bike trips, a high payload combined with as low a weight as possible is extremely important. Thanks to special plastics and weight-saving aluminium frame, the Monoporter weighs just 5.75 kg, but can be loaded with up to 25 kg of luggage on good quality roads. Off-road and on potholed tracks, up to 15 kg are possible.

HIGH QUALITY TO THE LAST DETAILAll metal parts are made of aluminium, stainless steel or other rustproof metals.For plastic parts we use break proof, fibre glass reinforced nylon plastic.

PAgE 13

Suitable pulling wheel sizes 24 - 28 inch with 20″ poss. surcharge

Overall width 440 mmPacking dimensions (l x w x h) 760 x 440 x 150 mmTrailer length approx. 1,500 mmWeight 5.75 kgPermitted payload (max) 25 kg

Fig. with luggage bag (accessories)

20SDSq wheel with hollow rim with eyelets and stainless steel spokes, hub with twin industrial bearings and stainless steel axle.

Minimal weight of 5.75 kg.

25 kg payload at optimum operating safety.

Lockable Weber CE hitch.

Snap on fastening system.

Sturdy aluminium single tube frame.

Scratch-resistant powder coating.

Rear end suspension.

Can be folded to fit in boot.

Special versions with wider forks for tandems & folding bikes or 20" wheels

fEATURES

TRIP ROUND THE WORLDSince its market launch in 2002, theMonoporter has earned much praise in the press and won the ISPO Innovation Award. An increas-ing number of touring professionals, such as the well-known extreme biker Tilmann Waldthaler, rely on the Monoporter. The number of bike couriers, lei-sure cyclists and city dwellers, who have discovered the Monoporter for themselves, is also increasing.

ACCESSORIES fOR THE MONOPORTER

MONO PUSH-IN RAILINGfOLDABLE, fOR SECURELY fASTEN-ING LOADS

MONO CARRY BAGMADE Of NYLON fOR TRANSPORTING THE fOLDED MONOPORTER

MONO LUGGAGE BAGWITH ROLL TOP fASTENER fOR KEEPING LUGGAGE WATERPROOf DURING TRANSPORT

PAgE 14

The roll top luggage bag made of extremely robust canvas material for the Monoporter. High frequency welded and hence 100% waterproof, the bag holds up to 80 litres of luggage. It is fitted onto the platform using the snap-on click system.

The practical bag for transporting your monoporter. Ideal for travel, stowing or keep-ing it clean when packed.

To hold your load securely in place laterally: the practical railing. Simply click into the standard push-in layout. Fits into the Monoporter carry bag when folded.

snow/weiß RAL9003glänzend

magic stone grey RAL9023matt

graphite metallicmatt

light blue RAL5012glänzend

magic night blue RAL5026glänzend

Sonnengoldmatt

classic orange RAL9009glänzend

bronzematt

classic red RAL3001glänzend

magic rubinrot RAL3032glänzend

light green RAL6018glänzend

magic green RAL6035glänzend

PAgE 15

MONO QUICK-RELEASE SKEWER

ExTRA LONG fOR WIDE DROPOUTS

MONO CR HITCH PIECESTWO-SIDED BIKE HITCH fOR ROHLOff GEAR HUBS

MONO CR HITCH PIECESTWO-SIDED BIKE HITCH

CUSTOMISE YOUR MONOPORTER The Monoporter is more than just a utility product. We therefore offer the Monoporter Custom in 12 special colours and a special custom design. Special requests are not a problem either!

Connecting the Monoporter pre-cisely and quickly with the pulling wheel: the Mono hitch pieces. Once fitted with the quick release skewer or the screw axle, they remain on the wheel.

Connecting the Monoporter pre-cisely and quickly with the pulling wheel: the Mono hitch pieces. Easy to remove wheel due to separate hitch screwed directly onto frame.

For extra wide dropouts, where the standard quick release skewer could be too short. Can be used for a clamping length of 160 - 175mm.

More at www.weber-products.de/monoporter

HitchConnector

PAgE 16

THE WEBER HITCHES

SIMPLE & SECURE: THE WEBER BIKE HITCHESThe Weber hitches have alwaysproved how important a reliable andeasy to use hitch is for the safety of a trailer; that is why they belong to the biggest selling branded hitches. Customers and manufacturers alike are increasingly converting to thetried and tested Weber hitch system.

HIGH QUALITY AND CLEVERWeber bike hitches have been designed for every-day and long-lasting use. All components are made exclusively from high qual-ity materials, such as fibre glass reinforced plastic, stainless steel, anodised aluminium and other rustproof materials.

WHAT THE PRESS SAY“Safe and no bother: the Weber hitch snaps in with one hand movement and made the safest impression in the test.” Trekkingbike 2/04

“The Weber hitch in particular left a good impression. It is also available combined with a bike stand, which ensures stability when parking.” Stiftung Warentest 5/03

JUST LIKE YOUR CAR All Weber hitch systems come in two parts, i.e. a coupler fixed to the pulling vehicle and a counterpart on the trailer's drawbar. are connected with each other by being hitched. The advantage: the hitch only has to be fitted once. The connection between wheel and trailer is made by an easy to use system.

PAgE 17

PUSH TOGETHER, TWIST TIGHT... fIN-ISHED! It is so simple, thanks to the innovative Weber bayonet catch. The two elements are connected firmly and precisely by pushing together and twist-ing a safety catch. SIMPLE OPERATION: YOUR BENEfIT Quick and easy usability guarantees ultimate convenience and minimises the risk of handling errors. No loose parts, no awkward fiddling with extra parts, no annoying rattling due to a connec-tion free of play. AND CAN EVEN BE LOCKED! (OPTIONAL)

Particularly practical for everyday use is the option of locking the Weber hitches and hence protecting the attached trailer against theft.

Push together ...

... twist ...

... finished!

And lock (optional).

SEITE 12

THE WEBER HITCH SYSTEM

Bike hitch is screwed onto the frame tube from inside.For all wheel sizesUp to 80 kg tensile loadFor Weber bayonet catchFor child transportation

E HITCH

LIGHT AND COMPATIBLE HITCH WITH ADDITIONAL SAfETY CABLE

Weight: 192 g

Assembly:

Bike hitch for fitting onto dropoutFor all wheel sizesUp to 80 kg tensile loadFor Weber bayonet catchFor child transportationSafety cable

B HITCH

HITCH WITH INTEGRATED BIKE STAND

Weight: 510 g

Assembly:

Bike hitch with integrated bike standFor 26" and 28SDSq wheel sizeUp to 80 kg tensile loadFor Weber bayonet catchFor child transportation Height of stand base adjustable

UP TO 80 KG – CHILD & LUGGAGE TRANSPORTATION

PAgE 18

EP HITCH

SPECIAL VERSION Of THE E HITCH fOR USE ON WHEELS WITH PLET-SCHER COMP KICKSTAND

Weight: 270 g

Assembly:

EL HITCH

THE LIGHT VERSION Of THE TRIED AND TESTED E HITCH

Weight: 180 g

Special feature:Light version of the E hitch.

Bike hitch for fitting to the dropoutFor all wheel sizesUp to 40 kg tensile loadFor Weber bayonet catchNot for child transportation

ER HITCH

SPECIAL VERSION Of THE E HITCH -USED ON WHEELS WITH ADJUST-ABLE ROHLOff DROPOUT

Weight: 221 g

Assembly:

Bike hitch for fitting directly to the movableRohloff dropout For all wheel sizesUp to 80 kg tensile loadFor Weber bayonet catchFor child transportation

EH HITCH

SPECIAL VERSION Of THE E HITCH fOR USE ON WHEELS WITH HEBIE REAR STAND 661

Weight: 220 g

Assembly:

Bike hitch for fitting to drop-outs with stand fasteningFor all wheel sizesUp to 80 kg tensile loadFor Weber bayonet catchFor child transportation

UP TO 40 KG -(not for child transp.)UP TO 80 KG – CHILD & LUGGAGE TRANSPORTATION

PAgE 19

(siehe unten)

THE WEBER HITCH SYSTEM

UP TO 40 KG – ONLY fOR LUGGAGE TRANSPORTATION (not permissible for child transportation)

H HITCH

fOR CARGO TRAILERS fOR fASTENING TO THE SADDLE SUPPORT

Weight: 435 g

Special feature:The tightening belt makes it very twist-resistant and at the same time gentle for the saddle support.

CR HITCH

SPECIAL VERSION Of THE E HITCH ES-PECIALLY fOR ROHLOff GEAR HUBS

Weight: 170 g

Special feature:Easy to remove wheel due to separate hitch screwed directly onto frame.

CE HITCH

TWO-SIDED BIKE HITCH fOR SINGLE WHEEL TRAILERS AND WEBER STROLLER HITCH

Weight: 192 g

Special feature:Two-sided hitch Special versions available:CR version - see rightC+ version: for Rohloff dropouts with integrated CE hitch

Bike hitch for fitting to the saddle supportFor all wheel sizesUp to 40 kg tensile loadFor Weber bayonet catchNot for child transportation

Double bike hitch for fitting to movable Rohloff dropoutAlso with all hub types (e.g. SRAM hubs with Clickbox)Up to 40 kg tensile loadNot for child transportation

Double bike hitch for fitting to the dropoutFor all wheel sizesUp to 40 kg tensile loadFor Weber bayonet catchNot for child transportation -except with the Weber stroller hitch

PAgE 20

(siehe unten)(not permissible for child transportation)

We have listened to the request of many customers who want flexible products that can be added to.A large assortment of special poly-gon inserts is available, especially for Shimano and SRAM internal gear hubs.The polygon inserts, which grip onto the dropout on the frame, protect the gears and the Weber hitch from twisting.

The existing anti-twist device is simply replaced by the right Weber polygon insert when fitting a Weber hitch. Just specify the type and colour code.

More polygon insertsFor fitting the E and CE hitch, if the frame is recessed at the dropout or add-on parts (e.g. disc brake) have to be bridged.

POLYGON INSERTS

fOR HITCHING TO DIffERENT BIKE MODELS WITH INTERNAL GEAR HUBS

Manufac-turer

Colour code

Type

Shimano brown 5 L

Shimano yellow 5 R

Shimano white 6 L

Shimano silver 6 R

Shimano grey 7 L

Shimano black 7 R

Shimano dark green 8 L

Shimano dark blue 8 R

SRAM blue 15 L

SRAM red 15 R

SRAM yellow 30 L

SRAM green 30 R

SRAM dark brown 67 L

SRAM turquoise 67 R

SRAM ochre brown 75 L

SRAM light purple 75 R

SRAM white 90

SRAM purple 180 L

SRAM orange 180 R

Bike hitch for fitting to the luggage carrierFor all wheel sizesUp to 40 kg tensile loadWith anti-tipping deviceNot for child transportation

M HITCH

fOR ROLLER CASES!fASTENED TO THE LUGGAGE CARRIER WITH ANTI-TIPPING DEVICE

Weight: 485 g

Special feature:We supply this hitch with a new subcarrier, which can be fitted to many luggage carriers with sup-port clamps.

PAgE 21

8mm13mm

15mm

ALSO fOR YOUR TRAILER!

Information about the assembly principle for B and H hitches:A stainless steel band 4 is placed around the frame tube or saddle support 5 and tightened with a screw connection against a so-called prism adaptor 6. The advantage is an extremely twist- resistant connection, a bigger diameter area and protection of the frame/saddle support against being crushed.

4

6

5

ALSO fOR YOUR TRAILER!Weber hitches fit almost all bikes and are easy to retrofit with most trailers. We supply conversion kits for this purpose.

The conversion kits consist of a hitch (choice of E, EL or H version), the matching connector, all neces-sary assembly parts and assembly instructions.

5 REASONS TO MAKE THE SWITCH NOW:

1. SAfE & RELIABLE From the very beginning, Weber hitches have set the benchmark for simple and safe handling. Push togeth-er, click in, ...finished. Together with a sophisticated system of visual and acoustic feedback, this simple handling reduces the risk of handling errors to a minimum.

2. fOR ALL BIKES & TRAILERS Special conversion kits make it possible to switch to a Weber hitch quickly and easily. These consist of a coupler and a connector, all the necessary materials and assembly instructions. For many manufacturers we supply complete drawbars in the familiar Weber quality.

PAgE 22

2

3

1

PAgE 23

Information about the assembly principle for E, EL, CE, CR hitches:The hitches 1 are fixed in place with the quick release skewer or the axle nut on the dropout. The so-called “Polygon insert” 2, which grips into the dropout3 on the frame, protects the hitch from twisting downwards and is used to set the angle of the hitch. We have all the appropriate special polygon inserts for Shimano and SRAM internal gear hubs.

4

3. EASY TO ASSEMBLEYou only have to fit a Weber hitch once. The hitch parts then remain on the wheel and trailer and are connected by the Weber bayonet catch or the click lever.

4. QUALITY MADE IN GERMANYAll Weber hitches are made and carefully checked in germany. All the relevant components are made out of high quality materials.

5. LONG-LASTING AND MAINTENANCE fREEDue to their special design and the materials used, Weber hitches are extremely long-lasting and practi-cally maintenance free.

CONVINCED? THEN MAKE THE SWITCH TO WEBER NOW!

Ask your dealer for the Weber conversion kits or visit our website www.weber-products.de

for more information, products and service:

WWW.WEBER-PRODUCTS.DE

YOUR WEBER DEALER:

© 2010 Weber Technik gmbH Errors & changes excepted!

Design: www.atai.de Photos: Rudi Schedl; Heidi Frank; Adam Wist; Florian&Rebecca