Oil Seals, Linear Recirclating Ball Bearings, Journal .... Oil Seals 375-408 Oil Seals, Linear Recirclating Ball Bearings, Journal Roller Assemblies, Spherical Plain Bearings, Rod

Misc.Oil Seals

375-408

Oil Seals, Linear Recirclating Ball Bearings,

Journal Roller Assemblies, Spherical Plain Bearings, Rod Ends

CONSOLIDATED BEARINGS COMPANYTen Wing Drive, Cedar Knolls, New Jersey 07927-1099

Tel: (973) 539-8300 Toll Free: 1-877-CON-BRG4Fax: (973) 539-5902 (266-2744)

E-mail: [email protected] Web Site: www.consbrgs.com

Product Reference &Interchange Catalog

The contents of this catalog are the copyright of the publisher andmay not be reproduced (including extracts) unless permission isgranted in writing by Consolidated Bearings Company, CedarKnolls, New Jersey. Every care has been taken to ensure theaccuracy of the data contained in this catalog. No liability can beaccepted for any errors, omissions or manufacturing designchanges.

Price per copy - $75.00

© Copyright 2008, Consolidated Bearings Co.

About the Company…

Consolidated Bearings Company, founded in 1932 by William F. Meerwarth, wasoriginally established as a bearing rebuilder and manufacturer. In 1934 Consolidatedobtained the exclusive contract to represent the SRO Ball Bearing Company of Zürich,Switzerland for sales of its products in the United States.

During World War II, when importing from Europe became non-existent, Consolidatedconcentrated its efforts in its Bearing Rebuilding Division. This Division added manyvaluable contributions to the War Effort in repairing and rebuilding worn bearings on anemergency basis. For their efforts, Consolidated earned the Army/Navy "E" Award.

Soon after the war, Consolidated reactivated its Import Division by representing severalmajor European bearing manufacturers. Selling exclusively to Bearing Distributors and OEM Accounts, Consolidated established a network of sales offices and districtwarehouses throughout the United States to provide prompt and efficient service to all its customers.

In 1969, Consolidated built and moved to its present location in Cedar Knolls, NewJersey, a suburb West of New York City. Since then, Consolidated has twice increasedthe size of its facilities to keep up with its expanding product line. The most recentenlargement added another 125,000 square feet of warehouse space.

Consolidated is constantly looking at new products and new technologies to meet thefuture needs of its customers. The goal at Consolidated is to provide its customers withthe most reliable service possible.

Abbreviations / Brands - ManufacturersThe following is a list of abbreviation/brands we have used in this catalog to identify the manufacturers and theirrespective country of origin.

BRAND MANUFACTURER

ADR Les Applications du Roulement - Div. of SKF Europe - FranceAETNA Aetna Bearing Co. - U.S.A.AMERICAN American Roller Bearing Co. - U.S.A.ANDREWS Andrews Bearing Corp. – Subs. of MPB Corp. – U.S.A.AURORA Aurora Bearing Co. – U.S.A.BAL Emil Baltzer - Germany

4 BARDEN The Barden Corp. - Div. of Industriewerk Schaeffler-Germany & USA.BCA BCA Bearing Div. - Federal Mogul - U.S.A.BERLISS Berliss Bearing Co. - U.S.A.BOWER Bower Bearing Div. - Federal Mogul - U.S.A.CFW Carl Freudenberg - GermanyCORLETT-TURNER Corlett-Turner Co. - U.S.A.ELGES Helmut Elges GmbH - Germany

3 FAF Fafnir Bearing - Div. of The Torrington Co. - U.S.A.- Subsidiary of Timken Bearing Co.4 FAG FAG Kugelfischer Georg Schafer & Co. - Germany and U.S.A. Subs. of Industriewerk

Schaeffler-Germany & USA.FBC Fafnir Bearing Co. Ltd. - EnglandFED/Schatz Schatz Federal Bearing Co. Inc. - U.S.A.GOETZE Goetzewerka - GermanyHEIM Heim Bearings Div. – Roller Bearing Co. of America – U.S.A.

1 HOFF Hoffmann Manufacturing Co. - U.S.A. - EnglandHYATT New Departure Hyatt - Hyatt Bearings Div. - U.S.A.INA Industriewerk Schaeffler - Germany & U.S.A.ISC Ishii Steel Ball Co. Ltd. – Div. of Genbearco International Corp. - JapanKACO Kupfer-Asbest Co. - GermanyKAYDON Kaydon Corp. - U.S.A.McGILL McGill Manufacturing Co. - U.S.A.MRC MRC Bearings - Div. of SKF Industries - U.S.A.NACHI Nachi-Fujikoshi Corp. - JapanNADELLA Nadella Societe Anoyma - FranceND New Departure Hyatt - U.S.A.

2 NH Norma Hoffmann Bearing Corporation - U.S.A.NICE Nice Ball Bearing Co. - Div. SKF Industries - U.S.A.NMB Nippon Miniature Bearing Co. Ltd. – JapanNSK NSK Bearing Corp. - JapanNTN NTN-Toyo Bearing Co. Ltd. - JapanRBC Roller Bearing Co. of America - U.S.A.RHP Ransome Hoffmann Pollard Ltd. - England

1 R&M Ransome & Marles Bearing Co. Ltd - EnglandRIV RIV - SKF - ItalyRMB Landis & Gyr, Inc. - U.S.A.ROLLWAY Rollway Bearing Div. - Lipe-Rollway Corp. - U.S.A.SEALMASTER Sealmaster Bearing Div. - Emerson Electric - U.S.A.SKF SKF Industries - U.S.A, Sweden, England, Germany, FranceSMITH Smith Bearing Co. - U.S.A.SNR Societe Nouvelle de Roulements - FranceSPHERCO Spherco Bearing Div. – Emerson Electric – U.S.A.

2 SRO J. Schmid-Roost Ltd. - SwitzerlandSTAR Deutsche Star Kugelhalter GmbH - GermanySTEYR Steyr-Walzlager GmbH - Subs. of SKF Industries - AustriaTHOMSON Thomson Industries Inc. - U.S.A.TORRINGTON The Torrington Company - U.S.A.- Subsidiary of Timken Bearing Co.

1 These manufacturers have been reorganized to form RHP - Ransome Hoffmann Pollard Ltd.2 These manufacturers have been purchased by FAG. Therefore, these brands are no longer in use.3 These manufacturers have been reorganized to form a subsidiary of Timken Bearing Co4 These manufacturers have been reorganized to form a division of Industriewerk Schaeffler-Germany & USA.

Consolidated Interchange-Style No.No.

Styled D B No. CFW GOETZE KACO

*15 x 21 x 3mm - - - -*15 x 23 x 3mm - - - -15 x 24 x 7mm 827N BA 827N DG15 x 26 x 7mm 827N - 827N DG15 x 30 x 7mm 827N BA 827N DG15 x 32 x 7mm 827N BA 827N DG15 x 35 x 7mm 827N BA 827N DG15 x 42 x 8mm 827N - 827N -

*16 x 20 x 2.5mm - - - -*16 x 22 x 3mm - - - -*16 x 24 x 3mm - - - -16 x 24 x 7mm 822N B1 822N DF16 x 26 x 7mm 827N - 827N DG16 x 28 x 7mm 827N BA 827N DG16 x 30 x 7mm 827N BA 827N DG16 x 32 x 10mm 827N BA 827N -16 x 35 x 10mm 827N BA 827N DG16 x 40 x 10mm 824N - 824N -

*17 x 23 x 3mm - - - -*17 x 25 x 3mm - - - -17 x 28 x 7mm 827N BA 827N DG17 x 30 x 7mm 827N BA 827N DG17 x 32 x 10mm 827N BA 827N -17 x 35 x 7mm 827N - 827N DG17 x 37 x 10mm 827N - 827N DG17 x 40 x 7mm 827N - 827N DG

*18 x 24 x 3mm - - - -*18 x 26 x 4mm - - - -18 x 28 x 7mm 827N BA 827N DG18 x 30 x 7mm 827N BA 827N DG18 x 32 x 7mm 827N - 827N DG18 x 36 x 7mm 827N - 827N -18 x 40 x 7mm 827N - 827N -

*19 x 27 x 4mm - - - -19 x 32 x 7mm 822N B1 822N -19 x 35 x 7mm 827S - 827S -19 x 35 x 10mm 827N BA 827N DG19 x 40 x 10mm 827N BA 827N DG

OIL SEALS - METRIC DIMENSIONSConsolidated Interchange-Style No.

No.Style

d D B No. CFW GOETZE KACO

*5 x 9 x 2mm - - - -

*6 x 10 x 2mm - - - -*6 x 12 x 2mm - - - -6 x 16 x 7mm 822N B1 822N -6 x 22 x 7mm 827N BA 827N DG

*7 x 11 x 2mm - - - -*7 x 14 x 2mm - - - -7 x 16 x 7mm 827N BA 827N DG7 x 22 x 7mm 827N BA 827N -

*8 x 12 x 3mm - - - -*8 x 15 x 3mm - - - -8 x 16 x 7mm 827N BA 827N DG8 x 22 x 7mm 827N BA 827N DG

*9 x 13 x 3mm - - - -9 x 18 x 7mm 827N BA 827N DG9 x 22 x 7mm 822N B1 822N -

*10 x 14 x 3mm - - - -10 x 19 x 7mm 827N BA 827N DG10 x 22 x 7mm 827N BA 827N DG10 x 24 x 7mm 822N B1 822N DF10 x 26 x 7mm 827N BA 827N DG10 x 30 x 10mm 822N - 822N DF

*12 x 16 x 3mm - - - -*12 x 18 x 3mm - - - -*12 x 19 x 3mm - - - -12 x 22 x 7mm 827N BA 827N DG12 x 24 x 7mm 827N BA 827N DG12 x 28 x 7mm 827N BA 827N DG12 x 30 x 7mm 827N - 827N DG12 x 32 x 7mm 827N BA 827N DG

*13 x 19 x 3mm - - - -13 x 26 x 7mm 827N BA 827N DG13 x 30 x 10mm 822N - 822N -

*14 x 18 x 2.5mm - - - -*14 x 20 x 3mm - - - -*14 x 22 x 3mm - - - -14 x 24 x 7mm 827N BA 827N DG14 x 26 x 7mm 827N BA 827N DG14 x 28 x 7mm 827N BA 827N -14 x 30 x 7mm 827N BA 827N -

375

*Narrow width - not spring-loaded.

NOTE:1.) The above are standard stocked sizes and are of Nitrilic black rubber composition bonded on steel casings. They are single lipped, spring-loaded.

Temperature range -15°F to +230°F. Sizes, compositions and types not shown above are available on a special order basis.Consult factory with specific requirements.

2.) The above interchange specifies style numbers equivalent to those listed in Column #2 and normally stocked.

goetze.822

Style 822NGround Metal O.D.

goetze.824

Style 824NGround MetalO.D.- Closed

goetze.827

Style 827NRubber O.D.Style 822N

Ground Metal O.D.Style 824N

Ground Metal O.D.- Closed

Style 827NRubber O.D.

Narrow Width



*26 x 34 x 4mm - - - -26 x 37 x 7mm 827N BA 827N DG26 x 42 x 10mm 827N BA 827N -26 x 45 x 10mm 822N - 822N DF

27 x 37 x 7mm 827N - 827N -27 x 42 x 10mm 827N BA 827N -27 x 47 x 7mm 827N BA 827N -

*28 x 35 x 4mm - - - -*28 x 37 x 4mm - - - -28 x 38 x 7mm 827N BA 827N -28 x 40 x 7mm 827N BA 827N DG28 x 40 x 10mm 822N - 822N -28 x 42 x 8mm 822N B1 822N -28 x 47 x 7mm 827N BA 827N DG28 x 52 x 7mm 827N - 827N -

*29 x 38 x 4mm - - - -

*30 x 36 x 2.5mm - - - -*30 x 37 x 4mm - - - -*30 x 40 x 4mm - - - -30 x 40 x 7mm 827N BA 827N DG30 x 42 x 7mm 827N BA 827N DG30 x 45 x 8mm 827N - 827N -30 x 45 x 10mm 827N BA 827N -30 x 47 x 7mm 827N - 827N -30 x 47 x 10mm 827N - 827N DG30 x 48 x 8mm 827N BA 827N -30 x 48 x 10mm 822N - 822N DF30 x 50 x 7mm 827N - 827N -30 x 52 x 7mm 827N - 827N -30 x 55 x 10mm 827N - 827N DG30 x 62 x 7mm 827N - 827N -30 x 72 x 10mm 822N - 822N -

*32 x 42 x 4mm - - - -*32 x 45 x 4mm - - - -32 x 45 x 7mm 827N BA 827N DG32 x 47 x 7mm 827N BA 827N DG32 x 48 x 7mm 822N B1 822N -32 x 50 x 8mm 827N BA 827N DG32 x 52 x 7mm 827N BA 827N DG32 x 55 x 10mm 827N BA 827N DG32 x 56 x 10mm 827N - 827N DG32 x 62 x 7mm 827N BA 827N -

OIL SEALS - METRIC DIMENSIONS (cont'd)Consolidated Interchange-Style No.

No.Style


*20 x 24 x 2.5mm - - - -*20 x 26 x 4mm - - - -*20 x 28 x 4mm - - - -20 x 28 x 6mm 822N - 822N -20 x 30 x 7mm 827N BA 827N DG20 x 32 x 7mm 827N BA 827N DG20 x 35 x 7mm 827N BA 827N DG20 x 37 x 10mm 827N BA 827N DG20 x 40 x 7mm 827N - 827N DG20 x 42 x 10mm 827N BA 827N DG20 x 47 x 7mm 827N BA 827N DG20 x 52 x 10mm 827N - 827N DG

*21 x 29 x 4mm - - - -

*22 x 26 x 2.5mm - - - -*22 x 28 x 4mm - - - -*22 x 30 x 4mm - - - -*22 x 30 x 4.2mm - - - -22 x 32 x 7mm 827N BA 827N DG22 x 35 x 7mm 827N BA 827N DG22 x 37 x 7mm 827N BA 827N -22 x 40 x 7mm 827N - 827N -22 x 42 x 10mm 824N B2 824N DF22 x 45 x 7mm 827N BA 827N -22 x 47 x 10mm 827N BA 827N DG

*24 x 32 x 4mm - - - -24 x 35 x 7mm 822N - 822N -24 x 37 x 7mm 827N BA 827N DG24 x 40 x 7mm 827N - 827N -24 x 42 x 10mm 822N - 822N DF24 x 47 x 7mm 827N - 827N DG

*25 x 31 x 2.5mm - - - -*25 x 32 x 4mm - - - -*25 x 32 x 5mm - - - -*25 x 33 x 4mm - - - -25 x 35 x 7mm 827N BA 827N DG25 x 36 x 7mm 827N BA 827N DG25 x 37 x 7mm 827N BA 827N DG25 x 38 x 7mm 827N - 827N -25 x 40 x 7mm 827N BA 827N DG25 x 42 x 10mm 827N - 827N DG25 x 45 x 10mm 827N BA 827N -25 x 47 x 7mm 827N - 827N DG25 x 50 x 10mm 827N - 827N DG25 x 52 x 7mm 827N BA 827N DG25 x 62 x 8mm 827N - 827N -25 x 62 x 10mm 827N BA 827N DG

376


Temperature range -15°F. to +230°F. Sizes, compositions and types not shown above are available on a special order basis.Consult factory with specific requirements.


* Narrow width - not spring-loaded.



*42 x 49 x 3mm - - - -*42 x 52 x 4mm - - - -42 x 55 x 7mm 827N BA 827N DG42 x 56 x 7mm 827N BA 827N DG42 x 58 x 9mm 822N B1 822N DF42 x 60 x 10mm 827N - 827N DG42 x 62 x 7mm 827N - 827N -42 x 65 x 10mm 827N - 827N DG42 x 68 x 12mm 824N - 824N -42 x 72 x 12mm 822N - 822N DF

43 x 60 x 10mm 824N B2 824N -43 x 62 x 10mm 827N BA 827N -

44 x 60 x 10mm 827N BA 827N -44 x 62 x 10mm 824N B2 824N -44 x 65 x 10mm 827N BA 827N DG

*45 x 52 x 4mm - - - -*45 x 55 x 4mm - - - -45 x 55 x 7mm 822N B1 822N -45 x 58 x 7mm 827N BA 827N DG45 x 60 x 7mm 827N BA 827N DG45 x 62 x 10mm 827N BA 827N DG45 x 65 x 10mm 827N BA 827N DG45 x 68 x 10mm 827N - 827N DG45 x 70 x 10mm 822N - 822N -45 x 72 x 7mm 827N - 827N -45 x 75 x 10mm 827N BA 827N DG45 x 80 x 10mm 827N - 827N DG45 x 85 x 10mm 822N - 822N -

46 x 65 x 10mm 824N B2 824N -

*48 x 55 x 3.5mm - - - -48 x 62 x 10mm 827N - 827N -48 x 65 x 10mm 827N BA 827N DG48 x 68 x 10mm 827S - 827S -48 x 70 x 10mm 827N BA 827N -48 x 72 x 7mm 827N BA 827N DG

*50 x 58 x 4mm - - - -*50 x 62 x 5mm - - - -50 x 62 x 10mm 822N B1 822N -50 x 65 x 8mm 827N BA 827N DG50 x 68 x 10mm 827N BA 827N DG50 x 70 x 10mm 827N - 827N DG50 x 72 x 10mm 827N BA 827N DG50 x 75 x 12mm 827N - 827N DG50 x 80 x 10mm 822N - 822N DF50 x 85 x 13mm 824N - 824N -50 x 90 x 13mm 822N - 822N DF


No.Style


33 x 52 x 10mm 827N - 827N -34 x 46 x 8mm 827N BA 827N DG34 x 48 x 8mm 822N - 822N -34 x 52 x 8mm 827N BA 827N DG34 x 62 x 10mm 827N BA 827N DG

*35 x 41 x 2.5mm - - - -*35 x 42 x 4mm - - - -*35 x 45 x 4mm - - - -35 x 45 x 7mm 827N - 827N -35 x 47 x 7mm 827N BA 827N DG35 x 50 x 10mm 827N BA 827N DG35 x 52 x 7mm 827N BA 827N -35 x 55 x 10mm 827N - 827N DG35 x 56 x 10mm 822N - 822N DF35 x 58 x 10mm 827N BA 827N -35 x 62 x 10mm 827N BA 827N DG35 x 68 x 6mm 827N - 827N -35 x 72 x 10mm 822N - 822N DF

36 x 47 x 7mm 822N B1 822N DF36 x 52 x 7mm 827N - 827N DG36 x 54 x 7mm 827N BA 827N DG36 x 56 x 10mm 822N - 822N -36 x 58 x 10mm 827N - 827N DG36 x 62 x 7mm 827N - 827N -36 x 68 x 10mm 827N - 827N DG

*37 x 47 x 4mm - - - -37 x 52 x 9mm 822N - 822N DF

*38 x 48 x 4mm - - - -38 x 50 x 7mm 827N BA 827N DG38 x 52 x 7mm 827N BA 827N -38 x 54 x 10mm 827N BA 827N DG38 x 55 x 7mm 827N - 827N DG38 x 56 x 10mm 822N - 822N DF38 x 60 x 10mm 822N - 822N DF38 x 62 x 10mm 827N BA 827N DG38 x 65 x 10mm 827N - 827N -38 x 72 x 12mm 824N - 824N -

*40 x 47 x 4mm - - - -*40 x 50 x 4mm - - - -40 x 52 x 7mm 827N BA 827N DG40 x 55 x 7mm 827N - 827N DG40 x 56 x 10mm 827N BA 827N DG40 x 58 x 10mm 827N - 827N -40 x 60 x 10mm 827N BA 827N DG40 x 62 x 7mm 827N - 827N DG40 x 65 x 10mm 827N BA 827N DG40 x 68 x 12mm 824N - 824N -40 x 72 x 7mm 827N - 827N DG40 x 72 x 10mm 827N - 827N -40 x 80 x 10mm 827N - 827N DG40 x 90 x 12mm 822N B1 822N -

377

*Narrow width - not spring-loaded.

NOTE:1.) The above are standard stocked sizes and are of Nitrilic black rubber composition bonded on steel casings. They are single lipped,

spring-loaded. Temperature range -15°F. to +230°F. Sizes, compositions and types not shown above are available on a special order basis.Consult factory with specific requirements.


goetze.822


goetze.824


goetze.827





Narrow Width



63 x 85 x 10mm 824N - 824N -

64 x 80 x 8mm 827N - 827N DG64 x 90 x 13mm 822N - 822N -

65 x 80 x 8mm 827N BA 827N DG65 x 85 x 10mm 827N - 827N DG65 x 90 x 10mm 827N BA 827N DG65 x 100 x 10mm 827N - 827N DG

68 x 85 x 10mm 827N - 827N -68 x 90 x 10mm 827N BA 827N DG68 x 100 x 10mm 827N BA 827N -

70 x 85 x 8mm 827N BA 827N DG70 x 90 x 10mm 827N BA 827N DG70 x 95 x 13mm 822N - 822N DF70 x 100 x 10mm 827N BA 827N -70 x 105 x 13mm 824N - 824N -70 x 110 x 13mm 827N - 827N -

72 x 90 x 10mm 822N - 822N -72 x 95 x 10mm 822N - 822N -72 x 100 x 13mm 824N - 824N -

74 x 100 x 13mm 822N - 822N DF

75 x 90 x 8mm 827N BA 827N -75 x 95 x 10mm 827N - 827N DG75 x 100 x 10mm 827N BA 827N -75 x 105 x 13mm 824N - 824N -75 x 110 x 13mm 827N - 827N -75 x 115 x 13mm 824N - 824N -

78 x 100 x 10mm 827N - 827N -

80 x 100 x 10mm 827N BA 827N DG80 x 105 x 13mm 827N BA 827N -80 x 110 x 13mm 822N - 822N DF80 x 120 x 13mm 824N - 824N -

82 x 105 x 13mm 822N - 822N DF82 x 110 x 13mm 824N - 824N -

85 x 100 x 13mm 822N - 822N -85 x 105 x 13mm 824N B2 824N -85 x 110 x 13mm 827N BA 827N -85 x 115 x 13mm 822N - 822N -85 x 120 x 13mm 822N - 822N DF


No.Style


*52 x 59 x 3.5mm - - - -52 x 68 x 8mm 827N BA 827N DG52 x 69 x 10mm 827N - 827N -52 x 70 x 10mm 822N - 822N -52 x 72 x 10mm 827N BA 827N DG52 x 75 x 12mm 827N - 827N -52 x 80 x 10mm 827N - 827N DG

53 x 68 x 10mm 827N - 827N DG53 x 73 x 7mm 822N - 822N -

54 x 70 x 8mm 822N - 822N -54 x 80 x 13mm 822N - 822N -54 x 82 x 10mm 827N - 827N DG

55 x 68 x 8mm 827N BA 827N DG55 x 70 x 8mm 827N BA 827N DG55 x 72 x 10mm 827N BA 827N DG55 x 75 x 10mm 827N BA 827N DG55 x 78 x 12mm 827N - 827N -55 x 78 x 13mm 824N - 824N -55 x 80 x 10mm 822N - 822N DF55 x 85 x 10mm 824N B2 824N -55 x 90 x 13mm 824N B2 824N -

56 x 72 x 8mm 827N BA 827N -56 x 80 x 10mm 824N B2 824N -

57 x 72 x 10mm 824N B2 824N -57 x 90 x 13mm 824N - 824N -

*58 x 65 x 3.5mm - - - -58 x 72 x 8mm 827N BA 827N DG58 x 75 x 12mm 822N - 822N DF58 x 78 x 13mm 824N B2 824N -58 x 80 x 10mm 822N - 822N -58 x 85 x 13mm 824N - 824N -58 x 90 x 13mm 822N - 822N DF

60 x 75 x 8mm 827N BA 827N DF60 x 78 x 13mm 822N - 822N -60 x 80 x 10mm 827N BA 827N DG60 x 85 x 10mm 827N BA 827N -60 x 90 x 10mm 827N BA 827N DG60 x 95 x 13mm 824N - 824N -

62 x 75 x 10mm 822N - 822N -62 x 80 x 10mm 827N BA 827N -62 x 85 x 10mm 827N BA 827N -62 x 90 x 13mm 822N - 822N -

378

*Narrow width - not spring loaded.

NOTE:1.) The above are standard stocked sizes and are of Nitrilic black rubber composition bonded on steel casings. They are single lipped,

spring-loaded. Temperature range -15°F. to +230°F. Sizes, compositions and types not shown above are available on a special order basis.Consult factory with specific requirements.




120 x 140 x 13mm 822N B1 822N DF120 x 145 x 15mm 824N - 824N -120 x 150 x 12mm 827N - 827N -120 x 160 x 15mm 822N - 822N DF

125 x 140 x 13mm 822N - 822N -125 x 150 x 13mm 827N - 827N -125 x 160 x 15mm 824N - 824N -

128 x 150 x 15mm 822N B1 822N DF

130 x 150 x 14mm 824N - 824N -130 x 160 x 13mm 822N - 822N -130 x 165 x 15mm 822N - 822N -130 x 170 x 15mm 827N - 827N -

132 x 160 x 15mm 822N - 822N -

135 x 160 x 13mm 822N - 822N DF135 x 170 x 15mm 824N - 824N -135 x 180 x 15mm 824S - 824S -

140 x 160 x 13mm 822N B1 822N -140 x 165 x 12mm 827N - 827N -140 x 170 x 15mm 827N - 827N -140 x 180 x 15mm 824N - 824N -

144 x 160 x 12mm 827N - 827N -144 x 180 x 15mm 822N - 822N DF

145 x 165 x 13mm 824N B2 824N -145 x 170 x 15mm 822N - 822N -145 x 175 x 15mm 824N - 824N -145 x 180 x 15mm 824N - 824N -

148 x 170 x 15mm 827N BA 827N DG

150 x 168 x 12mm 827N - 827N -150 x 170 x 15mm 827N - 827N -150 x 180 x 13mm 827N - 827N DG

155 x 180 x 15mm 822N - 822N -155 x 190 x 15mm 824N - 824N -

160 x 180 x 13mm 822N - 822N DF160 x 185 x 10mm 824N - 824N -160 x 190 x 15mm 827N - 827N -

165 x 190 x 13mm 827N BA 827N DG

170 x 190 x 15mm 822S - 822S -170 x 200 x 15mm 827N - 827N -

175 x 200 x 15mm 822N - 822N -

178 x 200 x 15mm 824N - 824N -


No.Style


88 x 110 x 13mm 822N - 822N DF88 x 120 x 13mm 824N - 824N -

90 x 110 x 12mm 827N BA 827N -90 x 115 x 13mm 822N - 822N DF90 x 120 x 13mm 827N BA 827N DG90 x 125 x 13mm 822N - 822N -

92 x 110 x 10mm 824N - 824N -92 x 120 x 13mm 824N - 824N -

95 x 110 x 10mm 824N - 824N -95 x 115 x 13mm 824N - 824N -95 x 120 x 13mm 827N BA 827N DG95 x 125 x 13mm 822N - 822N -95 x 130 x 13mm 822N - 822N DF

96 x 112 x 10mm 827N - 827N -

98 x 120 x 13mm 824N - 824N -98 x 125 x 12mm 827S - 827S -

100 x 115 x 9mm 822N B1 822N DF100 x 115 x 10mm 822N - 822N -100 x 120 x 10mm 827N BA 827N -100 x 120 x 13mm 824N - 824N -100 x 125 x 13mm 822N - 822N DF100 x 130 x 13mm 822N - 822N DF100 x 140 x 13mm 824N - 824N -

102 x 130 x 13mm 827N - 827N -

104 x 125 x 10mm 827N BA 827N -

105 x 125 x 13mm 822N - 822N DF105 x 130 x 13mm 827N - 827N -105 x 140 x 13mm 822N - 822N DF

107 x 130 x 13mm 822N - 822N -

108 x 130 x 13mm 824N - 824N -

110 x 130 x 13mm 827N - 827N DG110 x 140 x 13mm 822N - 822N DF110 x 150 x 15mm 824N B2 824N -

112 x 140 x 13mm 827N - 827N -

114 x 140 x 13mm 822N - 822N DF

115 x 135 x 13mm 822N B1 822N -115 x 140 x 13mm 827N - 827N -115 x 150 x 15mm 824N - 824N -

379


Temperature range -15°F. to +230°F. Sizes, compositions and types not shown above are available on a special order basis. Consult factory with specific requirements.

2.) The above interchange specifies style number equivalent to those listed in Column #2 and normally stocked.

goetze.822


goetze.824


goetze.827





Narrow Width


No.Style


180 x 200 x 15mm 824N B2 824N -180 x 210 x 15mm 822N - 822N -180 x 215 x 16mm 822N B1 822N DF180 x 220 x 16mm 824N - 824N -

185 x 210 x 13mm 827N BA 827N DG185 x 215 x 16mm 824N - 824N -

190 x 220 x 16mm 824N - 824N -190 x 230 x 16mm 824N B2 824N -

200 x 230 x 16mm 822N B1 822N -200 x 240 x 15mm 822N - 822N -200 x 250 x 16mm 824N - 824N -

210 x 240 x 15mm 824N - 824N -210 x 250 x 16mm 824N - 824N -

220 x 250 x 16mm 822N - 822N -

225 x 250 x 13mm 824N - 824N -

230 x 270 x 16mm 824N - 824N -

240 x 270 x 16mm 824N - 824N -

250 x 280 x 16mm 824N B2 824N -250 x 290 x 16mm 824N - 824N -

260 x 290 x 16mm 824N - 824N -

270 x 310 x 16mm 824N - 824N -

280 x 310 x 16mm 824N - 824N -280 x 320 x 16mm 824N - 824N -

300 x 340 x 16mm 824N - 824N -

310 x 350 x 20mm 824N - 824N -

320 x 360 x 18mm 827N - 827N -

325 x 375 x 20mm 824N - 824N -

340 x 372 x 16mm 824N - 824N -

350 x 380 x 18mm 824N - 824N -

360 x 400 x 20mm 824N - 824N -

380 x 420 x 20mm 824N - 824N -

400 x 450 x 20mm 827N - 827N -

420 x 460 x 20mm 824N - 824N -


Temperature range -15°F. to +230°F. Sizes, compositions and types not shown above are available on a special order basis. Consult factory with specific requirements.

2.) The above interchange specifies style number equivalent to those listed in Column #2 and normally stocked.

380

goetze.822


goetze.824


goetze.827



Style 824NGround Metal O.D.- Closed


381

conso2a

B

C

dD

conso2d

conso2bkbn

E

KB..N-Adjustable

conso2c

E1

“OPN”-Open“ADJ” - Adjustable “OPN” - Open

LINEAR RECIRCULATING BALL BEARINGS - INCH DIMENSIONSConsolidate Dimensions Approx. Interchange

No. (Inch) Wgt.No. of (lbs.)

d D B C E Circuits Barden Heim INA Thomson

A-258 .1250 .3125 .5000 .3681 - 4 .006 - ILBB-125 - -A-3610 .1875 .3750 .6250 .4311 - 4 .008 - ILBB-187 - -A-4812 .2500 .5000 .7500 .5110 - 3 .020 L-4 LBB-250 KBZ 04 A-4812A-61014 .3750 .6250 .8750 .6360 - 4 .060 L-6 LBB-375 KBZ 06 A-61014A-81420 .5000 .8750 1.2500 .9630 - 4 .080 L-8 LBB-500 KBZ 08 A-81420

A-101824 .6250 1.1250 1.5000 1.1040 - 4 .160 L-10 LBB-625 KBZ 10 A-101824A-122026 .7500 1.2500 1.6250 1.1660 - 5 .210 L-12 LBB-750 KBZ 12 A-122026A-162536 1.0000 1.5625 2.2500 1.7550 - 5 .380 L-16 LBB-1000 KBZ 16 A-162536A-203242 1.2500 2.0000 2.6250 2.0050 - 6 1.100 L-20 LBB-1250 KBZ 20 A-203242A-243848 1.5000 2.3750 3.0000 2.4120 - 6 1.430 L-24 LBB-1500 KBZ 24 A-243848

A-324864 2.0000 3.0000 4.0000 3.1920 - 6 2.750 L-32 LBB-2000 KBZ 32 A-324864A-406080 2.5000 3.7500 5.0000 3.9760 - 6 5.500 L-40 LBB-2500 - A-406080A-487296 3.0000 4.5000 6.0000 4.7260 - 6 9.500 L-48 LBB-3000 - A-487296A-6496128 4.0000 6.0000 8.0000 6.2580 - 6 20.500 L-64 LBB-4000 - A-6496128

NOTE:1.) Prefix "XA" - Extra Precision Grade also available.

ADJUSTABLEd D B C E

ADJ-81420 .5000 .8750 1.2500 .9630 .0625 4 .080 LA-8 ADJ-500 - ADJ-81420ADJ-101824 .6250 1.1250 1.5000 1.1040 .0937 4 .160 LA-10 ADJ-625 - ADJ-101824ADJ-122026 .7500 1.2500 1.6250 1.1660 .0937 5 .210 LA-12 ADJ-750 - ADJ-122026ADJ-162536 1.0000 1.5625 2.2500 1.7550 .0937 5 .380 LA-16 ADJ-1000 - ADJ-162536ADJ-203242 1.2500 2.0000 2.6250 2.0050 .0937 6 1.100 LA-20 ADJ-1250 - ADJ-203242

ADJ-243848 1.5000 2.3750 3.0000 2.4120 .1250 6 1.430 LA-24 ADJ-1500 - ADJ-243848ADJ-324864 2.0000 3.0000 4.0000 3.1920 .1250 6 2.750 LA-32 ADJ-2000 - ADJ-324864ADJ-406080 2.5000 3.7500 5.0000 3.9760 .1250 6 5.500 LA-40 ADJ-2500 - ADJ-406080ADJ-487296 3.0000 4.5000 6.0000 4.7260 .1250 6 9.500 LA-48 ADJ-3000 - ADJ-487296ADJ-6496128 4.0000 6.0000 8.0000 6.2580 .1250 6 20.500 LA-64 ADJ-4000 - ADJ-6496128

OPENd D B C E1

OPN-81420 .5000 .8750 1.2500 .9630 .3125 3 .070 LO-8 OPN-500 KBZ 08 OP OPN-81420OPN-101824 .6250 1.1250 1.5000 1.1040 .3750 3 .110 LO-10 OPN-625 KBZ 10 OP OPN-101824OPN-122026 .7500 1.2500 1.6250 1.1660 .4375 4 .170 LO-12 OPN-750 KBZ 12 OP OPN-122026OPN-162536 1.0000 1.5625 2.2500 1.7550 .5625 4 .320 LO-16 OPN-1000 KBZ 16 OP OPN-162536OPN-203242 1.2500 2.0000 2.6250 2.0050 .6250 5 .900 LO-20 OPN-1250 KBZ 20 OP OPN-203242

OPN-243848 1.5000 2.3750 3.0000 2.4120 .7500 5 1.120 LO-24 OPN-1500 KBZ 24 OP OPN-243848OPN-324864 2.0000 3.0000 4.0000 3.1920 1.0000 5 2.160 LO-32 OPN-2000 KBZ 32 OP OPN-324864OPN-406080 2.5000 3.7500 5.0000 3.9760 1.2500 5 4.240 LO-40 OPN-2500 - OPN-406080OPN-487296 3.0000 4.5000 6.0000 4.7260 1.5000 5 7.330 LO-48 OPN-3000 - OPN-487296OPN-6496128 4.0000 6.0000 8.0000 6.2580 2.0000 5 17.250 LO-64 OPN-4000 - OPN-6496128

NOTE:1.) Also available sealed. Add suffix - “2RS”. Consult factory for availability.2.) Also available in stainless steel. Consult factory for availability.

382

LINEAR RECIRCULATING BALL BEARINGS - METRIC DIMENSIONSConsolidated Dimensions Approx. Interchange

No. (Metric) Wgt.No. of (lbs.)

d D B C E Circuits FAG INA STAR SKF

KB-5 5 12 22 14.5 - 4 .020 LAA5x12x22 - 0600-305-00 LBAR 5KB-8 8 16 25 16.5 - 4 .040 LAA8x16x25A - 0600-308-00 LBAR 8KB-12 12 22 32 22.9 - 4 .090 LAA12x22x32 KB 1232 0600-012-00 -KB-16 16 26 36 24.9 - 4 .110 LAA16x26x36 KB 1636 0600-016-00 -KB-20 20 32 45 31.5 - 5 .220 LAA20x32x45 KB 2045 0600-020-00 -

KB-25 25 40 58 44.1 - 6 .420 LAA25x40x58 KB 2558 0600-025-00 -KB-30 30 47 68 52.1 - 6 .700 LAA30x47x68 KB 3068 0600-030-00 -KB-40 40 62 80 60.6 - 6 1.370 LAA40x62x80 KB 4080 0600-040-00 -KB-50 50 75 100 77.6 - 6 2.500 LAA50x75x100 KB 50100 0600-050-00 -KB-60 60 90 125 101.7 - 6 4.640 - - 0600-060-00 -

ADJUSTABLEd D B C E

KB-5N 5 12 22 14.5 1.0 4 .020 - - 0610-305-00 LBAS 5KB-8N 8 16 25 16.5 1.0 4 .040 LAG8x16x25A - 0610-308-00 LBAS 8KB-12N 12 22 32 22.9 1.5 4 .090 LAG12x22x32 KBS 1232 0610-012-00 -KB-16N 16 26 36 24.9 1.5 4 .110 LAG16x26x36 KBS 1636 0610-016-00 -KB-20N 20 32 45 31.5 2.0 5 .220 LAG20x32x45 KBS 2045 0610-020-00 -

KB-25N 25 40 58 44.1 2.0 6 .420 LAG25x40x58 KBS 2558 0610-025-00 -KB-30N 30 47 68 52.1 2.0 6 .700 LAG30x47x68 KBS 3068 0610-030-00 -KB-40N 40 62 80 60.6 3.0 6 1.370 LAG40x62x80 KBS 4080 0610-040-00 -KB-50N 50 75 100 77.6 3.0 6 2.500 LAG50x75x100 KBS 50100 0610-050-00 -KB-60N 60 90 125 101.7 3.0 6 4.640 - 0610-060-00 LBAS 60

KB-80N 80 120 165 133.7 3.0 6 10.340 - 0610-080-00 LBAS 80

OPENd D B C E1

KB-12S 12 22 32 22.9 7.5 3 .070 LAN12x22x32A KBO 1232 0630-012-00 -KB-16S 16 26 36 24.9 10.0 3 .090 LAN16x26x36A KBO 1636 0630-016-00 -KB-20S 20 32 45 31.5 10.0 4 .170 LAN20x32x45A KBO 2035 0630-020-00 -KB-25S 25 40 58 44.1 12.5 5 .330 LAN25x40x58A KBO 2558 0630-025-00 -KB-30S 30 47 68 52.1 12.5 5 .570 LAN30x47x68A KBO 3068 0630-030-00 LBAT 30

KB-40S 40 62 80 60.6 16.8 5 1.140 LAN40x62x80A KBO 4080 0630-040-00 -KB-50S 50 75 100 77.6 21.0 5 2.090 LAN50x75x100A KBO 50100 0630-050-00 -KB-60S 60 90 125 101.7 27.2 5 3.870 - - 0630-060-00 LBAT 60KB-80S 80 120 165 133.7 30.3 5 8.620 - - 0630-080-00 LBAT 80

NOTE:1.) Single and double sealed bearings are also available in all types. Add suffix "D" for single sealed. Add suffix "2D" for double sealed.2.) Also available in stainless steel. Consult factory for availability.

conso2a

B

C

dD

conso2d

conso2bkbn

E

KB..N-Adjustable

conso2ckbs

E1

KB..S-OpenKB..N- Adjustable KB..S- Open

383

EXTRA CAPACITY LINEAR RECIRCULATING BALL BEARINGS - INCH DIMENSIONSConsolidated Dimensions Approx. Interchange

No. (Inch) Wgt.No.of (lbs)

d D B C E1 Circuits Barden INA Thomson NB

SUP-4 .2500 .5000 .7500 .4370 - 4 .008 FL-4 KNZ 04 SUPER-4 TW-4SUP-6 .3750 .6250 .8750 .6250 - 4 .013 FL-6 KNZ 06 SUPER-6 TW-6SUP-8 .5000 .8750 1.2500 .9402 - 4 .042 FL-8 KNZ 08 SUPER-8 TW-8SUP-10 .6250 1.1250 1.5000 1.0000 - 5 .101 FL-10 KNZ 10 SUPER-10 TW-10SUP-12 .7500 1.2500 1.6250 1.1602 - 6 .123 FL-12 KNZ 12 SUPER-12 TW-12

SUP-16 1.0000 1.5625 2.2500 1.7500 - 6 .265 FL-16 KNZ 16 SUPER-16 TW-16SUP-20 1.2500 2.0000 2.6250 1.8750 - 6 .485 - KNZ 20 SUPER-20 TW-20SUP-24 1.5000 2.3750 3.0000 2.2502 - 6 .750 - KNZ 24 SUPER-24 TW-24SUP-32 2.0000 3.0000 4.0000 3.0000 - 6 1.389 - KNZ 32 SUPER-32 TW-32

OPENSUP-8-OPN .5000 .8750 1.2500 .9402 .3130 3 .033 - KNZ 08 OP SUPER-8-OPN TW-8-OPSUP-10-OPN .6250 1.1250 1.5000 1.0000 .3750 4 .082 - KNZ 10 OP SUPER-10-OPN TW-10-OPSUP-12-OPN .7500 1.2500 1.6250 1.1602 .4380 5 .101 FLO-12 KNZ 12 OP SUPER-12-OPN TW-12-OPSUP-16-OPN 1.0000 1.5625 2.2500 1.7500 .5630 5 .220 FLO-16 KNZ 16 OP SUPER-16-OPN TW-16-OPSUP-20-OPN 1.2500 2.0000 2.6250 1.8750 .6250 5 .397 - KNZ 20 OP SUPER-20-OPN TW-20-OP

SUP-24-OPN 1.5000 2.3750 3.0000 2.2502 .7500 5 .617 - KNZ 24 OP SUPER-24-OPN TW-24-OPSUP-32-OPN 2.0000 3.0000 4.0000 3.0000 1.0000 5 1.146 - KNZ 32 OP SUPER-32-OPN TW-32-OP

NOTE:1.) Also available double sealed - add suffix "2RS"2.) Seals do not change the length

conso2a

B

C

dD

conso2c

E1

“OPN”-OpenSUP- .. OPNOpen

384

LINEAR RECIRCULATING BALL BEARINGS PILLOW BLOCKS - INCH DIMENSIONSConsolidated Dimensions

No. (Inch)

d h E W L F T G M h1 O B C S

SPB-4 .2500 .4375 .8125 1.6250 1.1875 .8125 .1875 .7500 1.0000 - -SPB-6 .3750 .5000 .8750 1.7500 1.3125 .9375 .1875 .8750 1.1250 - -SPB-8 .5000 .6875 1.0000 2.0000 1.6875 1.2500 .2500 1.1250 1.3750 - -SPB-10 .6250 .8750 1.2500 2.5000 1.9375 1.6250 .2812 1.4375 1.7500 - -SPB-12 .7500 .9375 1.3750 2.7500 2.0625 1.7500 .3125 1.5625 1.8750 - -

SPB-16 1.0000 1.1875 1.6250 3.2500 2.8125 2.1875 .3750 1.9375 2.3750 - -SPB-20 1.2500 1.5000 2.0000 4.0000 3.6250 2.8125 .4375 2.5000 3.0000 - -SPB-24 1.5000 1.7500 2.3750 4.7500 4.0000 3.2500 .5000 2.8750 3.5000 - -SPB-32 2.0000 2.1250 3.0000 6.0000 5.0000 4.0625 .6250 3.6250 4.5000 - -

ADJUSTABLESPB-8-ADJ .5000 .6875 1.0000 2.0000 1.6875 1.2500 .2500 1.1250 1.3750 - -SPB-10-ADJ .6250 .8750 1.2500 2.5000 1.9375 1.6250 .2812 1.4375 1.7500 - -SPB-12-ADJ .7500 .9375 1.3750 2.7500 2.0625 1.7500 .3125 1.5625 1.8750 - -SPB-16-ADJ 1.0000 1.1875 1.6250 3.2500 2.8125 2.1875 .3750 1.9375 2.3750 - -SPB-20-ADJ 1.2500 1.5000 2.0000 4.0000 3.6250 2.8125 .4375 2.5000 3.0000 - -

SPB-24-ADJ 1.5000 1.7500 2.3750 4.7500 4.0000 3.2500 .5000 2.8750 3.5000 - -SPB-32-ADJ 2.0000 2.1250 3.0000 6.0000 5.0000 4.0625 .6250 3.6250 4.5000 - -

OPENSPB-8-OPN .5000 .6875 1.0000 2.0000 1.5000 1.1000 .2500 .6875 .9050 .3437SPB-10-OPN .6250 .8750 1.2500 2.5000 1.7500 1.3750 .2812 .8750 1.0950 .3750SPB-12-OPN .7500 .9375 1.3750 2.7500 1.8750 1.5350 .3125 .9375 1.1610 .4375SPB-16-OPN 1.0000 1.1875 1.6250 3.2500 2.6250 1.9750 .3750 1.1875 1.4570 .4650SPB-20-OPN 1.2500 1.5000 2.0000 4.0000 3.3750 2.4850 .4375 1.5000 1.8310 .6250

SPB-24-OPN 1.5000 1.7500 2.3750 4.7500 3.7500 2.9100 .5000 1.7500 2.0870 .7500SPB-32-OPN 2.0000 2.1250 3.0000 6.0000 4.7500 3.6600 .6250 2.2500 2.6380 1.0000

NOTE:1.) Load ratings may vary between manufacturers.

nb.13b

Self-aligning 1°in all directions

LC

nb.13a

T

4-S

F

h

M

G

EWB

d

385

Approx. InterchangeWgt.(lbs.)

O B C S Barden Thomson NB

- 1.3125 .7500 .1562 .100 FPB-4 SPB-4 TWA 4UU- 1.4375 .8750 .1562 .140 FPB-6 SPB-6 TWA 6UU- 1.6875 1.0000 .1562 .290 FPB-8 SPB-8 TWA 8UU- 2.1250 1.1250 .1875 .530 FPB-10 SPB-10 TWA 10UU- 2.3750 1.2500 .1875 .640 FPB-12 SPB-12 TWA 12UU

- 2.8750 1.7500 .2187 1.360 FPB-16 SPB-16 TWA 16UU- 3.5000 2.0000 .2187 2.870 - SPB-20 TWA 20UU- 4.1250 2.5000 .2812 4.190 - SPB-24 TWA 24UU- 5.2500 3.2500 .4062 7.940 - SPB-32 TWA 32UU

- 1.6875 1.000 .1562 .290 - SPB-8-ADJ TWJ 8UU- 2.1250 1.125 .1875 .530 - SPB-10-ADJ TWJ 10UU- 2.3750 1.250 .1875 .640 - SPB-12-ADJ TWJ 12UU- 2.8750 1.750 .2187 1.360 - SPB-16-ADJ TWJ 16UU- 3.5000 2.000 .2187 2.870 - SPB-20-ADJ TWJ 20UU

- 4.1250 2.500 .2812 4.190 - SPB-24-ADJ TWJ 24UU- 5.2500 3.250 .4062 7.940 - SPB-32-ADJ TWJ 32UU

30° 1.6875 1.000 .1562 .220 - SPB-8-OPN TWD 8UU30° 2.1250 1.125 .1875 .410 - SPB-10-OPN TWD 10UU30° 2.3750 1.250 .1875 .520 FPB-12-OPN SPB-12-OPN TWD 12UU30° 2.8750 1.750 .2187 1.170 FPB-16-OPN SPB-16-OPN TWD 16UU30° 3.5000 2.000 .2187 2.380 - SPB-20-OPN TWD 20UU

30° 4.1250 2.500 .2817 3.570 - SPB-24-OPN TWD 24UU30° 5.2500 3.250 .4062 6.840 - SPB-32-OPN TWD 32UU

nb14a

T

4-S

G

WB

E

h

F

M

nb15a

T

4-S

30°

EWB

hF

G M

h1

ADJUSTABLE OPEN

386

nb16b

L

nb16d

D2

h1

DIA.

HF

BWnew.conso6

F

h2-S

WB

End Shaft Support

Shaft Support Rail

LINEAR RECIRCULATING BALL BEARING - END SHAFT SUPPORTConsolidated Nominal Dimensions Approx. Interchange

No. Shaft (inch) Wgt.Dia. (lbs)

(inch) h W L F B S Thomson NB

WH-4A .2500 .6875 1.5000 .5000 1.0625 1.1250 .1562 .033 - WH 4AWH-6A .3750 .7500 1.6250 .5625 1.1875 1.2500 .1562 .044 - WH 6AWH-8A .5000 1.0000 2.0000 .6250 1.6250 1.5000 .1875 .075 SB8 WH 8AWH-10A .6250 1.0000 2.5000 .6875 1.7500 1.8750 .2187 .106 SB10 WH 10AWH-12A .7500 1.2500 2.5000 .7500 2.0625 2.0000 .2187 .156 SB12 WH 12A

WH-16A 1.0000 1.5000 3.0625 1.0000 2.5000 2.5000 .2817 .294 SB16 WH 16AWH-20A 1.2500 1.7500 3.7500 1.1250 3.0000 3.0000 .3460 .531 SB20 WH 20AWH-24A 1.5000 2.0000 4.3750 1.2500 3.4375 3.5000 .3460 .725 SB24 WH 24AWH-32A 2.0000 2.5000 5.5000 1.5000 7.3750 4.5000 .4062 1.400 SB32 WH 32A

NOTE:1.) Precision end shaft supports are made of machined die cast aluminum.2.) Some non-critical dimensions may vary between manufacturers.

LINEAR RECIRCULATING BALL BEARING - SHAFT SUPPORT RAILConsolidated Nominal Dimensions Approx. Interchange

No. Shaft (inch) Wgt.Dia. (lbs)

(inch) H W F h1 B D2 Thomson NB

WA-8-24 .5000 1.1250 1.5000 .9030 .2550 1.0000 .1690 1.326 SR8 WA 8-24WA-10-24 .6250 1.1250 1.6250 .8410 .2760 1.1250 .1930 1.488 SR10 WA 10-24WA-12-24 .7500 1.5000 1.7500 1.1580 .3220 1.2500 .2210 2.100 SR12 WA 12-24WA-16-24 1.0000 1.7500 2.1250 1.2800 .3590 1.5000 .2812 2.776 SR16 WA 16-24WA-20-24 1.2500 2.1250 2.5000 1.5370 .4375 1.8750 .3430 4.060 SR20 WA 20-24

WA-24-24 1.5000 2.5000 3.0000 1.7980 .5580 2.2500 .3430 5.840 SR24 WA 24-24WA-32-24 2.0000 3.2500 3.7500 2.3220 .8000 2.7500 .4062 9.500 SR32 WA 32-24

NOTE:1.) Precision shaft support rails are made of extruded machined aluminum.2.) Precision shaft support rails are available with or without pre-drilled mounting holes.3.) For rails with pre-drilled mounting holes - add suffix "PD" . 4.) All rail lengths are 24".5.) Some non-critical dimensions may vary between manufacturers.

JOURNAL ROLLER ASSEMBLIES - INCH DIMENSIONSConsolidated Dimensions (Inch) Interchange

No. Approx.d D B dr Wgt. BERLISSShaft Outside Oper. Roller (lbs.) HYATTDia. Dia. Space Dia. BAL RBC ROLLWAY

92120 .5000 .8125 1.2500 .1562 .080 - 92120 -93020 .3750 .7500 1.2500 .1875 .070 - 93020 06022093024 .3750 .7500 1.5000 .1875 .100 - 93024 -93028 .3750 .7500 1.7500 .1875 .110 - 93028 -93032 .3750 .7500 2.0000 .1875 .130 - 93032 -

93112 .5000 .8750 .7500 .1875 .070 080312 93112 08021293116 .5000 .8750 1.0000 .1875 .090 080316 93116 08021693118 .5000 .8750 1.1250 .1875 .100 080318 93118 08021893120 .5000 .8750 1.2500 .1875 .110 080320 93120 08022093122 .5000 .8750 1.3750 .1875 .130 080322 93122 08022293124 .5000 .8750 1.5000 .1875 .140 080324 93124 08022493126 .5000 .8750 1.6250 .1875 .150 080326 93126 08022693128 .5000 .8750 1.7500 .1875 .160 080328 93128 08022893132 .5000 .8750 2.0000 .1875 .180 080332 93132 080232

93212 .6250 1.0000 .7500 .1875 .080 100312 93212 10021293216 .6250 1.0000 1.0000 .1875 .110 100316 93216 10021693218 .6250 1.0000 1.1250 .1875 .120 100318 93218 10021893220 .6250 1.0000 1.2500 .1875 .130 100320 93220 10022093222 .6250 1.0000 1.3750 .1875 .150 100322 93222 10022293224 .6250 1.0000 1.5000 .1875 .170 100324 93224 10022493226 .6250 1.0000 1.6250 .1875 .190 100326 93226 10022693228 .6250 1.0000 1.7500 .1875 .200 100328 93228 10022893232 .6250 1.0000 2.0000 .1875 .230 100332 93232 10023293236 .6250 1.0000 2.2500 .1875 .260 100336 93236 -93240 .6250 1.0000 2.5000 .1875 .300 100340 93240 -

93312 .7500 1.1250 .7500 .1875 .090 120312 93312 12021293316 .7500 1.1250 1.0000 .1875 .120 120316 93316 12021693318 .7500 1.1250 1.1250 .1875 .130 120318 93318 12021893320 .7500 1.1250 1.2500 .1875 .140 120320 93320 12022093322 .7500 1.1250 1.3750 .1875 .160 120322 93322 12022293324 .7500 1.1250 1.5000 .1875 .190 120324 93324 12022493326 .7500 1.1250 1.6250 .1875 .200 120326 93326 12022693328 .7500 1.1250 1.7500 .1875 .220 120328 93328 12022893332 .7500 1.1250 2.0000 .1875 .250 120332 93332 12023293336 .7500 1.1250 2.2500 .1875 .280 120336 93336 -93340 .7500 1.1250 2.5000 .1875 .320 120340 93340 -93344 .7500 1.1250 2.7500 .1875 .340 120344 93344 -93348 .7500 1.1250 3.0000 .1875 .400 120348 93348 -

93412 .8750 1.2500 .7500 .1875 .100 140312 93412 14021293416 .8750 1.2500 1.0000 .1875 .130 140316 93416 14021693418 .8750 1.2500 1.1250 .1875 .150 140318 93418 14021893420 .8750 1.2500 1.2500 .1875 .160 140320 93420 14022093422 .8750 1.2500 1.3750 .1875 .180 140322 93422 14022293424 .8750 1.2500 1.5000 .1875 .200 140324 93424 14022493426 .8750 1.2500 1.6250 .1875 .220 140326 93426 14022693428 .8750 1.2500 1.7500 .1875 .240 140328 93428 14022893432 .8750 1.2500 2.0000 .1875 .280 140332 93432 14023293436 .8750 1.2500 2.2500 .1875 .310 140336 93436 14023693440 .8750 1.2500 2.5000 .1875 .350 140340 93440 -93444 .8750 1.2500 2.7500 .1875 .390 140344 93444 -93448 .8750 1.2500 3.0000 .1875 .440 140348 93448 -

NOTE:1.) The above have hardened and ground solid steel trunnioned end rollers.2.) Solid races for this series are available on a special order basis.

387

conso330

rd

B

dD

JOURNAL ROLLER ASSEMBLIES - INCH DIMENSIONS (cont'd)Consolidated Dimensions (Inch) Interchange


93512 1.0000 1.3750 .7500 .1875 .150 160312 93512 -93516 1.0000 1.3750 1.0000 .1875 .190 160316 93516 -93518 1.0000 1.3750 1.1250 .1875 .220 160318 93518 -93520 1.0000 1.3750 1.2500 .1875 .250 160320 93520 -93522 1.0000 1.3750 1.3750 .1875 .280 160322 93522 -93524 1.0000 1.3750 1.5000 .1875 .300 160324 93524 -93526 1.0000 1.3750 1.6250 .1875 .320 160326 93526 -93528 1.0000 1.3750 1.7500 .1875 .350 160328 93528 -93532 1.0000 1.3750 2.0000 .1875 .400 160332 93532 -93536 1.0000 1.3750 2.2500 .1875 .480 160336 93536 -93540 1.0000 1.3750 2.5000 .1875 .540 160340 93540 -93544 1.0000 1.3750 2.7500 .1875 .580 160344 93544 -93548 1.0000 1.3750 3.0000 .1875 .620 160348 93548 -

93612 1.1250 1.5000 .7500 .1875 .350 180312 93612 -93616 1.1250 1.5000 1.0000 .1875 .380 180316 93616 -93618 1.1250 1.5000 1.1250 .1875 .400 180318 93618 -93620 1.1250 1.5000 1.2500 .1875 .420 180320 93620 -93622 1.1250 1.5000 1.3750 .1875 .440 180322 93622 -93624 1.1250 1.5000 1.5000 .1875 .460 180324 93624 -93626 1.1250 1.5000 1.6250 .1875 .480 180326 93626 -93628 1.1250 1.5000 1.7500 .1875 .500 180328 93628 -93632 1.1250 1.5000 2.0000 .1875 .540 180332 93632 -93636 1.1250 1.5000 2.2500 .1875 .620 180336 93636 -93640 1.1250 1.5000 2.5000 .1875 .680 180340 93640 -93644 1.1250 1.5000 2.7500 .1875 .740 180344 93644 -93648 1.1250 1.5000 3.0000 .1875 .800 180348 93648 -

94112 .5000 1.0000 .7500 .2500 .100 080412 94112 08041294116 .5000 1.0000 1.0000 .2500 .130 080416 94116 08041694118 .5000 1.0000 1.1250 .2500 .150 080418 94118 08041894120 .5000 1.0000 1.2500 .2500 .160 080420 94120 08042094122 .5000 1.0000 1.3750 .2500 .180 080422 94122 08042294124 .5000 1.0000 1.5000 .2500 .190 080424 94124 08042494126 .5000 1.0000 1.6250 .2500 .210 080426 94126 08042694128 .5000 1.0000 1.7500 .2500 .230 080428 94128 08042894130 .5000 1.0000 1.8750 .2500 .250 080430 94130 08043094132 .5000 1.0000 2.0000 .2500 .270 080432 94132 08043294136 .5000 1.0000 2.2500 .2500 .310 080436 94136 -94140 .5000 1.0000 2.5000 .2500 .350 080440 94140 -

94212 .6250 1.1250 .7500 .2500 .100 100412 94212 10041294216 .6250 1.1250 1.0000 .2500 .140 100416 94216 10041694218 .6250 1.1250 1.1250 .2500 .160 100418 94218 10041894220 .6250 1.1250 1.2500 .2500 .170 100420 94220 10042094222 .6250 1.1250 1.3750 .2500 .190 100422 94222 10042294224 .6250 1.1250 1.5000 .2500 .210 100424 94224 10042494226 .6250 1.1250 1.6250 .2500 .230 100426 94226 10042694228 .6250 1.1250 1.7500 .2500 .240 100428 94228 10042894230 .6250 1.1250 1.8750 .2500 .260 100430 94230 10043094232 .6250 1.1250 2.0000 .2500 .280 100432 94232 10043294236 .6250 1.1250 2.2500 .2500 .320 100436 94236 -94240 .6250 1.1250 2.5000 .2500 .360 100440 94240 -


388

conso330

rd

B

dD



94312 .7500 1.2500 .7500 .2500 .160 120412 94312 12041294316 .7500 1.2500 1.0000 .2500 .180 120416 94316 12041694318 .7500 1.2500 1.1250 .2500 .210 120418 94318 12041894320 .7500 1.2500 1.2500 .2500 .230 120420 94320 12042094322 .7500 1.2500 1.3750 .2500 .250 120422 94322 12042294324 .7500 1.2500 1.5000 .2500 .270 120424 94324 12042494326 .7500 1.2500 1.6250 .2500 .290 120426 94326 12042694328 .7500 1.2500 1.7500 .2500 .310 120428 94328 12042894330 .7500 1.2500 1.8750 .2500 .330 120430 94330 12043094332 .7500 1.2500 2.0000 .2500 .400 120432 94332 12043294336 .7500 1.2500 2.2500 .2500 .430 120436 94336 12043694338 .7500 1.2500 2.3750 .2500 .450 120438 - -94340 .7500 1.2500 2.5000 .2500 .490 120440 94340 120440

94412 .8750 1.3750 .7500 .2500 .140 140412 94412 14041294416 .8750 1.3750 1.0000 .2500 .180 140416 94416 14041694418 .8750 1.3750 1.1250 .2500 .200 140418 94418 14041894420 .8750 1.3750 1.2500 .2500 .220 140420 94420 14042094422 .8750 1.3750 1.3750 .2500 .240 140422 94422 14042294424 .8750 1.3750 1.5000 .2500 .260 140424 94424 14042494428 .8750 1.3750 1.7500 .2500 .310 140428 94428 14042894430 .8750 1.3750 1.8750 .2500 .330 140430 94430 14043094432 .8750 1.3750 2.0000 .2500 .350 140432 94432 14043294436 .8750 1.3750 2.2500 .2500 .410 140436 94436 14043694440 .8750 1.3750 2.5000 .2500 .450 140440 94440 14044094444 .8750 1.3750 2.7500 .2500 .490 140444 94444 -94448 .8750 1.3750 3.0000 .2500 .550 140448 94448 -

94512 1.0000 1.5000 .7500 .2500 .170 160412 94512 16041294516 1.0000 1.5000 1.0000 .2500 .210 160416 94516 16041694518 1.0000 1.5000 1.1250 .2500 .240 160418 94518 16041894520 1.0000 1.5000 1.2500 .2500 .270 160420 94520 16042094522 1.0000 1.5000 1.3750 .2500 .300 160422 94522 16042294524 1.0000 1.5000 1.5000 .2500 .320 160424 94524 16042494526 1.0000 1.5000 1.6250 .2500 .340 160426 94526 16042694528 1.0000 1.5000 1.7500 .2500 .370 160428 94528 16042894530 1.0000 1.5000 1.8750 .2500 .400 160430 94530 16043094532 1.0000 1.5000 2.0000 .2500 .430 160432 94532 16043294536 1.0000 1.5000 2.2500 .2500 .510 160436 94536 16043694540 1.0000 1.5000 2.5000 .2500 .570 160440 94540 16044094544 1.0000 1.5000 2.7500 .2500 .610 160444 94544 -94548 1.0000 1.5000 3.0000 .2500 .650 160448 94548 -

94612 1.1250 1.6250 .7500 .2500 .300 180412 94612 -94616 1.1250 1.6250 1.0000 .2500 .330 180416 94616 18041694618 1.1250 1.6250 1.1250 .2500 .350 180418 94618 -94620 1.1250 1.6250 1.2500 .2500 .370 180420 94620 18042094622 1.1250 1.6250 1.3750 .2500 .400 180422 94622 -94624 1.1250 1.6250 1.5000 .2500 .420 180424 94624 18042494626 1.1250 1.6250 1.6250 .2500 .440 180426 94626 -94628 1.1250 1.6250 1.7500 .2500 .460 180428 94628 18042894630 1.1250 1.6250 1.8750 .2500 .500 180430 94630 -


389

conso330

rd

B

dD



94632 1.1250 1.6250 2.0000 .2500 .520 180432 94632 18043294636 1.1250 1.6250 2.2500 .2500 .600 180436 94636 18043694640 1.1250 1.6250 2.5000 .2500 .660 180440 94640 18044094644 1.1250 1.6250 2.7500 .2500 .700 180444 94644 18044494648 1.1250 1.6250 3.0000 .2500 .750 180448 94648 180448

94712 1.2500 1.7500 .7500 .2500 .270 200412 - -94716 1.2500 1.7500 1.0000 .2500 .290 200416 94716 -94720 1.2500 1.7500 1.2500 .2500 .300 200420 94720 20042094724 1.2500 1.7500 1.5000 .2500 .350 200424 94724 -94726 1.2500 1.7500 1.6250 .2500 .390 200426 94726 20042694728 1.2500 1.7500 1.7500 .2500 .480 200428 94728 -94732 1.2500 1.7500 2.0000 .2500 .570 200432 94732 20043294736 1.2500 1.7500 2.2500 .2500 .700 200436 94736 -94740 1.2500 1.7500 2.5000 .2500 .800 200440 94740 -94744 1.2500 1.7500 2.7500 .2500 .950 200444 94744 -94748 1.2500 1.7500 3.0000 .2500 1.030 200448 94748 20044894764 1.2500 1.7500 4.0000 .2500 1.150 200464 94764 -

95312 .7500 1.3750 .7500 .3125 .180 120512 95312 -95316 .7500 1.3750 1.0000 .3125 .190 120516 95316 12051695320 .7500 1.3750 1.2500 .3125 .260 120520 95320 12052095324 .7500 1.3750 1.5000 .3125 .300 120524 95324 12052495328 .7500 1.3750 1.7500 .3125 .370 120528 95328 12052895332 .7500 1.3750 2.0000 .3125 .450 120532 95332 12053295336 .7500 1.3750 2.2500 .3125 .500 120536 95336 12053695340 .7500 1.3750 2.5000 .3125 .550 120540 95340 12054095344 .7500 1.3750 2.7500 .3125 .610 120544 95344 -95348 .7500 1.3750 3.0000 .3125 .660 120548 95348 -

95412 .8750 1.5000 .7500 .3125 .200 140512 95412 -95416 .8750 1.5000 1.0000 .3125 .240 140516 95416 14051695420 .8750 1.5000 1.2500 .3125 .260 140520 95420 14052095424 .8750 1.5000 1.5000 .3125 .320 140524 95424 14052495428 .8750 1.5000 1.7500 .3125 .350 140528 95428 14052895432 .8750 1.5000 2.0000 .3125 .450 140532 95432 14053295436 .8750 1.5000 2.2500 .3125 .490 140536 95436 14053695440 .8750 1.5000 2.5000 .3125 .530 140540 95440 14054095444 .8750 1.5000 2.7500 .3125 .590 140544 95444 -95448 .8750 1.5000 3.0000 .3125 .650 140548 95448 -

95512 1.0000 1.6250 .7500 .3125 .300 160512 95512 -95516 1.0000 1.6250 1.0000 .3125 .340 160516 95516 16051695520 1.0000 1.6250 1.2500 .3125 .360 160520 95520 16052095524 1.0000 1.6250 1.5000 .3125 .420 160524 95524 16052495528 1.0000 1.6250 1.7500 .3125 .450 160528 95528 16052895532 1.0000 1.6250 2.0000 .3125 .510 160532 95532 16053295536 1.0000 1.6250 2.2500 .3125 .550 160536 95536 16053695540 1.0000 1.6250 2.5000 .3125 .590 160540 95540 16054095544 1.0000 1.6250 2.7500 .3125 .650 160544 95544 16054495548 1.0000 1.6250 3.0000 .3125 .710 160548 95548 16054895556 1.0000 1.6250 3.5000 .3125 .750 160556 95556 -95564 1.0000 1.6250 4.0000 .3125 .800 160564 95564 -

95616 1.1250 1.7500 1.0000 .3125 .240 180516 95616 -95624 1.1250 1.7500 1.5000 .3125 .380 180524 95624 -95632 1.1250 1.7500 2.0000 .3125 .590 180532 95632 18053295636 1.1250 1.7500 2.2500 .3125 .670 180536 95636 18053695640 1.1250 1.7500 2.5000 .3125 .750 180540 95640 18054095648 1.1250 1.7500 3.0000 .3125 .880 180548 95648 -


390

conso330

rd

B

dD



95712 1.2500 1.8750 .7500 .3125 .290 200512 95712 -95716 1.2500 1.8750 1.0000 .3125 .310 200516 95716 20051695720 1.2500 1.8750 1.2500 .3125 .380 200520 95720 20052095724 1.2500 1.8750 1.5000 .3125 .460 200524 95724 20052495728 1.2500 1.8750 1.7500 .3125 .530 200528 95728 20052895732 1.2500 1.8750 2.0000 .3125 .600 200532 95732 20053295736 1.2500 1.8750 2.2500 .3125 .750 200536 95736 20053695740 1.2500 1.8750 2.5000 .3125 .930 200540 95740 20054095744 1.2500 1.8750 2.7500 .3125 1.130 200544 95744 20054495748 1.2500 1.8750 3.0000 .3125 1.210 200548 95748 20054895756 1.2500 1.8750 3.5000 .3125 1.370 200556 95756 20055695764 1.2500 1.8750 4.0000 .3125 1.780 200564 95764 200564

95824 1.3750 2.0000 1.5000 .3125 .410 220524 95824 -95832 1.3750 2.0000 2.0000 .3125 .570 220532 95832 -95840 1.3750 2.0000 2.5000 .3125 .690 220540 95840 22054095848 1.3750 2.0000 3.0000 .3125 .850 220548 95848 -

95912 1.5000 2.1250 .7500 .3125 .500 240512 95912 -95920 1.5000 2.1250 1.2500 .3125 .550 240520 95920 -95924 1.5000 2.1250 1.5000 .3125 .610 240524 95924 -95928 1.5000 2.1250 1.7500 .3125 .690 240528 95928 -95932 1.5000 2.1250 2.0000 .3125 .760 240532 95932 -95936 1.5000 2.1250 2.2500 .3125 .890 240536 95936 -95940 1.5000 2.1250 2.5000 .3125 .980 240540 95940 -95944 1.5000 2.1250 2.7500 .3125 1.200 240544 95944 -95948 1.5000 2.1250 3.0000 .3125 1.350 240548 95948 -95956 1.5000 2.1250 3.5000 .3125 1.500 240556 95956 -95964 1.5000 2.1250 4.0000 .3125 1.800 240564 95964 -

96516 1.0000 1.7500 1.0000 .3750 .320 160616 96516 16061696524 1.0000 1.7500 1.5000 .3750 .460 160624 96524 16062496532 1.0000 1.7500 2.0000 .3750 .590 160632 96532 16063296536 1.0000 1.7500 2.2500 .3750 .660 160636 96536 -96540 1.0000 1.7500 2.5000 .3750 .780 160640 96540 16064096548 1.0000 1.7500 3.0000 .3750 .910 160648 96548 16064896564 1.0000 1.7500 4.0000 .3750 1.500 160664 96564 160664

96716 1.2500 2.0000 1.0000 .3750 .410 200616 96716 20061696720 1.2500 2.0000 1.2500 .3750 .620 200620 96720 20062096724 1.2500 2.0000 1.5000 .3750 .810 200624 96724 20062496728 1.2500 2.0000 1.7500 .3750 .950 200628 96728 20062896732 1.2500 2.0000 2.0000 .3750 1.220 200632 96732 20063296740 1.2500 2.0000 2.5000 .3750 1.620 200640 96740 20064096748 1.2500 2.0000 3.0000 .3750 2.030 200648 96748 20064896764 1.2500 2.0000 4.0000 .3750 2.500 200664 96764 20066496780 1.2500 2.0000 5.0000 .3750 3.100 200680 96780 -

97724 1.2500 2.1250 1.5000 .4375 .630 200724 97724 -97732 1.2500 2.1250 2.0000 .4375 .820 200732 97732 -97740 1.2500 2.1250 2.5000 .4375 1.070 200740 97740 -97748 1.2500 2.1250 3.0000 .4375 1.220 200748 97748 200748

98724 1.2500 2.2500 1.5000 .5000 .750 200824 98724 20082498732 1.2500 2.2500 2.0000 .5000 1.000 200832 98732 20083298740 1.2500 2.2500 2.5000 .5000 1.250 200840 98740 20084098748 1.2500 2.2500 3.0000 .5000 1.470 200848 98748 200848

98824 1.3750 2.3750 1.5000 .5000 .800 220824 98824 22082498832 1.3750 2.3750 2.0000 .5000 1.070 220832 98832 22083298840 1.3750 2.3750 2.5000 .5000 1.350 220840 98840 22084098848 1.3750 2.3750 3.0000 .5000 1.610 220848 98848 220848

NOTE:1.) The above have hardened and ground solid steel trunnioned end rollers.2.) Solid races for this series are available on a special order basis. 391

conso330

rd

B

dD

JOURNAL ROLLER BEARING OUTER RACES - INCH DIMENSIONSConsolidated Appropriate Interchange

No. Assembly

d D B BERLISS HYATT

13⁄16 x 15⁄16 x 1 1⁄4 92120 - - - -

3⁄4 x 13⁄16 x 1 1⁄4 93020 - - 4849 -3⁄4 x 13⁄16 x 1 1⁄2 93024 - - 5524 -3⁄4 x 13⁄16 x 1 3⁄4 93028 - - - -3⁄4 x 13⁄16 x 2 93032 - - 5954 -

7⁄8 x 15⁄16 x 3⁄4 93112 - - 5913 -7⁄8 x 15⁄16 x 1 93116 - - 5193 -7⁄8 x 15⁄16 x 1 1⁄4 93120 - - 5080 46907⁄8 x 15⁄16 x 1 1⁄2 93124 - - 4419 48897⁄8 x 15⁄16 x 1 3⁄4 93128 - - 4646 48887⁄8 x 15⁄16 x 2 93132 - - 5177 -

1 x 1 1⁄16 x 3⁄4 93212 94112 - 4687 46871 x 1 1⁄16 x 1 93216 94116 - 4100 48871 x 1 1⁄16 x 1 1⁄4 93220 94120 - 4851 48511 x 1 1⁄16 x 1 1⁄2 93224 94124 - 4120 48141 x 1 1⁄16 x 1 3⁄4 93228 94128 - 4802 48901 x 1 1⁄16 x 2 93232 94132 - 4136 48911 x 1 1⁄16 x 2 1⁄4 93236 94136 - - -1 x 1 1⁄16 x 2 1⁄2 93240 94140 - 5084 -

1 1⁄8 x 1 3⁄16 x 3⁄4 93312 94212 - 4892 48921 1⁄8 x 1 3⁄16 x 1 93316 94216 - 4101 4375A1 1⁄8 x 1 3⁄16 x 1 1⁄4 93320 94220 - 4820 48201 1⁄8 x 1 3⁄16 x 1 1⁄2 93324 94224 - 4121 41211 1⁄8 x 1 3⁄16 x 1 3⁄4 93328 94228 - 4648 48281 1⁄8 x 1 3⁄16 x 2 93332 94232 - 4137 48151 1⁄8 x 1 3⁄16 x 2 1⁄4 93336 94236 - 5988 -1 1⁄8 x 1 3⁄16 x 2 1⁄2 93340 94240 - 4168 -1 1⁄8 x 1 3⁄16 x 3 93348 - - 5951 -

1 1⁄4 x 1 5⁄16 x 3⁄4 93412 94312 - - -1 1⁄4 x 1 5⁄16 x 1 93416 94316 - 5007 -1 1⁄4 x 1 5⁄16 x 1 1⁄4 93420 94320 - 4683 -1 1⁄4 x 1 5⁄16 x 1 1⁄2 93424 94324 - 5014 48221 1⁄4 x 1 5⁄16 x 1 3⁄4 93428 94328 - 4835 48351 1⁄4 x 1 5⁄16 x 2 93432 94332 - 4422 48341 1⁄4 x 1 5⁄16 x 2 1⁄4 93436 94336 - 5997 -1 1⁄4 x 1 5⁄16 x 2 1⁄2 93440 94340 - 4649 48981 1⁄4 x 1 5⁄16 x 2 3⁄4 93444 - - 5994 -1 1⁄4 x 1 5⁄16 x 3 93448 - - 5965 -

1 3⁄8 x 1 7⁄16 x 3⁄4 - 94412 - 5916 -1 3⁄8 x 1 7⁄16 x 1 93516 94416 - 4102 48961 3⁄8 x 1 7⁄16 x 1 1⁄4 93520 94420 95320 5057 -1 3⁄8 x 1 7⁄16 x 1 1⁄2 93524 94424 95324 4122 43771 3⁄8 x 1 7⁄16 x 1 3⁄4 93528 94428 95328 4547 45471 3⁄8 x 1 7⁄16 x 2 93532 94432 95332 4138 43781 3⁄8 x 1 7⁄16 x 2 1⁄4 93536 94436 95336 5097 49861 3⁄8 x 1 7⁄16 x 2 1⁄2 93540 94440 95340 4169 48991 3⁄8 x 1 7⁄16 x 2 3⁄4 93544 94444 95344 5949 -1 3⁄8 x 1 7⁄16 x 3 93548 94448 95348 5147 -

1 1⁄2 x 1 9⁄16 x 3⁄4 93612 - - 5917 -1 1⁄2 x 1 9⁄16 x 1 93616 94516 95416 4103 48361 1⁄2 x 1 9⁄16 x 1 1⁄4 93620 94520 95420 4234 -1 1⁄2 x 1 9⁄16 x 1 1⁄2 93624 94524 95424 4123 48111 1⁄2 x 1 9⁄16 x 1 3⁄4 93628 94528 95428 5526 -1 1⁄2 x 1 9⁄16 x 2 93632 94532 95432 4139 48401 1⁄2 x 1 9⁄16 x 2 1⁄4 93636 94536 95436 5082 -1 1⁄2 x 1 9⁄16 x 2 1⁄2 93640 94540 95440 4170 48311 1⁄2 x 1 9⁄16 x 2 3⁄4 93644 - - 5522 -1 1⁄2 x 1 9⁄16 x 3 93648 - - 4171 -

392

conso335

D d

B

JOURNAL ROLLER BEARING OUTER RACES - INCH DIMENSIONS (cont'd)Consolidated Appropriate Interchange

No. Assembly

d D B BERLISS HYATT

1 5⁄8 x 1 3⁄4 x 3⁄4 - - 95512 - -1 5⁄8 x 1 3⁄4 x 1 - 94616 95516 4641 46411 5⁄8 x 1 3⁄4 x 1 1⁄4 - 94620 - 5560 46991 5⁄8 x 1 3⁄4 x 1 1⁄2 - 94624 95524 5945 -1 5⁄8 x 1 3⁄4 x 1 3⁄4 - 94628 95528 4548 45481 5⁄8 x 1 3⁄4 x 2 - 94632 95532 4838 48381 5⁄8 x 1 3⁄4 x 2 1⁄4 - 94636 95536 - -1 5⁄8 x 1 3⁄4 x 2 1⁄2 - - 95540 4839 48391 5⁄8 x 1 3⁄4 x 3 - 94648 95548 4841 4643

1 3⁄4 x 1 7⁄8 x 1 94716 95616 96516 - -1 3⁄4 x 1 7⁄8 x 1 1⁄4 94720 95620 96520 - -1 3⁄4 x 1 7⁄8 x 1 1⁄2 94724 95624 96524 - -1 3⁄4 x 1 7⁄8 x 2 94732 95632 96532 4549 45491 3⁄4 x 1 7⁄8 x 2 1⁄4 94736 95636 96536 - -1 3⁄4 x 1 7⁄8 x 2 1⁄2 94740 95640 96540 5043 48951 3⁄4 x 1 7⁄8 x 3 94748 95648 96548 4886 48861 3⁄4 x 1 7⁄8 x 4 94764 - 96564 5535 -

1 7⁄8 x 2 x 1 1⁄2 95724 - - 4829 48291 7⁄8 x 2 x 2 95732 - - 4843 48431 7⁄8 x 2 x 2 1⁄2 95740 - - 4893 48931 7⁄8 x 2 x 3 95748 - - 4382 48371 7⁄8 x 2 x 3 1⁄2 95756 - - 5993 -1 7⁄8 x 2 x 4 95764 - - 5534 -

2 x 2 1⁄8 x 1 1⁄2 95824 - - - -2 x 2 1⁄8 x 2 95832 - - 5925 -2 x 2 1⁄8 x 2 1⁄2 95840 - - - -2 x 2 1⁄8 x 3 95848 - - 4832 -

2 x 2 3⁄16 x 2 96732 - - 4425 44252 x 2 3⁄16 x 2 1⁄2 96740 - - 4446 44462 x 2 3⁄16 x 3 96748 - - 4450 44502 x 2 3⁄16 x 4 96764 - - - -2 x 2 3⁄16 x 5 96780 - - - -

2 1⁄8 x 2 1⁄4 x 1 1⁄4 95820 - - 4689 46892 1⁄8 x 2 1⁄4 x 1 1⁄2 95924 - - 5585 -2 1⁄8 x 2 1⁄4 x 2 95932 - - 4387 43872 1⁄8 x 2 1⁄4 x 2 1⁄2 95940 - - 4395 43952 1⁄8 x 2 1⁄4 x 3 95948 - - 5990 -2 1⁄8 x 2 1⁄4 x 3 1⁄2 95956 - - 4236 -2 1⁄8 x 2 1⁄4 x 4 95964 - - 4238 -

2 1⁄8 x 2 5⁄16 x 1 1⁄2 - - 97724 - -2 1⁄8 x 2 5⁄16 x 2 - - 97732 4427 44272 1⁄8 x 2 5⁄16 x 2 1⁄2 - - 97740 4439 44392 1⁄8 x 2 5⁄16 x 3 - - 97748 4460 4460

2 1⁄4 x 2 7⁄16 x 1 1⁄2 - - 98724 4406 44062 1⁄4 x 2 7⁄16 x 2 - - 98732 4431 44312 1⁄4 x 2 7⁄16 x 2 1⁄2 - - 98740 4448 44482 1⁄4 x 2 7⁄16 x 3 - - 98748 4452 4452

2 3⁄8 x 2 9⁄16 x 1 1⁄2 - - 98824 4407 44072 3⁄8 x 2 9⁄16 x 2 - - 98832 4432 44322 3⁄8 x 2 9⁄16 x 2 1⁄2 - - 98840 4438 44382 3⁄8 x 2 9⁄16 x 3 - - 98848 4454 4454

393

conso335

D d

B

SPHERICAL PLAIN BEARINGS - STEEL ON STEEL - METRIC DIMENSIONSConsolidated Dimensions Approx. Interchange

No. (Metric) Wgt.Angle of (lbs.) ELGES

d D B C Tilt FAG INA RBC SKF

GE-4 E 4 12 5 3 17° .010 GE4E - - GE 4 EGE-5 E 5 14 6 4 13° .010 GE5E - - GE 5 EGE-6 E 6 14 6 4 13° .010 GE6E GE 6 DO - GE 6 EGE-8 E 8 16 8 5 15° .020 GE8E GE 8 DO - GE 8 EGE-10 E 10 19 9 6 12° .030 GE10E GE 10 DO - GE 10 E

GE-12 E 12 22 10 7 11° .040 GE12E GE 12 DO MB12 GE 12 E

GE-15 ES 15 26 12 9 10° .080 GE15ES GE 15 DO MB15 GE 15 ESGE-17 ES 17 30 14 10 11° .110 GE17ES GE 17 DO MB17 GE 17 ESGE-20 ES 20 35 16 12 9° .140 GE20ES GE 20 DO MB20 GE 20 ESGE-25 ES 25 42 20 16 8° .260 GE25ES GE 25 DO MB25 GE 25 ESGE-30 ES 30 47 22 18 7° .350 GE30ES GE 30 DO MB30 GE 30 ES

GE-35 ES 35 55 25 20 7° .510 GE35ES GE 35 DO MB35 GE 35 ESGE-40 ES 40 62 28 22 7° .710 GE40ES GE 40 DO MB40 GE 40 ESGE-45 ES 45 68 32 25 8° 1.000 GE45ES GE 45 DO MB45 GE 45 ESGE-50 ES 50 75 35 28 7° 1.250 GE50ES GE 50 DO MB50 GE 50 ESGE-60 ES 60 90 44 36 7° 2.450 GE60ES GE 60 DO MB60 GE 60 ES

GE-70 ES 70 105 49 40 6° 3.400 GE70ES GE 70 DO MB70 GE 70 ESGE-80 ES 80 120 55 45 6° 5.050 GE80ES GE 80 DO MB80 GE 80 ESGE-90 ES 90 130 60 50 5° 6.050 GE90ES GE 90 DO MB90 GE 90 ESGE-100 ES 100 150 70 55 7° 9.700 GE100ES GE 100 DO MB100 GE 100 ESGE-110 ES 110 160 70 55 6° 10.500 GE110ES GE 110 DO MB110 GE 110 ES

GE-120 ES 120 180 85 70 6° 17.000 GE120ES GE 120 DO MB120 GE 120 ESGE-140 ES 140 210 90 70 7° 24.500 GE140ES GE 140 DO MB140 GE 140 ESGE-160 ES 160 230 105 80 8° 31.000 GE160ES GE 160 DO MB160-9L GE 160 ESGE-180 ES 180 260 105 80 7° 41.000 GE180ES GE 180 DO MB180-9L GE 180 ESGE-200 ES 200 290 130 100 7° 61.500 GE200ES GE 200 DO MB200-9L GE 200 ES

GE-220 ES 220 320 135 100 8° 78.500 GE220ES GE 220 DO MB220-9L GE 220 ESGE-240 ES 240 340 140 100 8° 88.000 GE240ES GE 240 DO MB240-9L GE 240 ESGE-260 ES 260 370 150 110 7° 115.000 GE260ES GE 260 DO MB260-9L GE 260 ESGE-280 ES 280 400 155 120 6° 145.000 GE280ES GE 280 DO MB280-9L GE 280 ESGE-300 ES 300 430 165 120 7° 175.000 GE300ES GE 300 DO MB300-9L GE 300 ES

NOTE:1.) GE..E series - split outer ring without lubrication holes.2.) GE..ES series - split outer ring with lubrication holes.

394

ina7a

GE..ES

D d

C

B

GE..ESGE..E

358a

D

GE..E

d

C

B

395

SPHERICAL PLAIN BEARINGS - METRIC DIMENSIONS - HIGH CAPACITYConsolidated Dimensions Approx. Interchange


d D B C Tilt FAG INA SKF

GE-4 C 4 12 5 3 17° .010 GE4C - GE 4 CGE-6 C 6 14 6 4 13° .010 GE6C GE 6 UK GE 6 CGEH-6 C 6 16 9 5 21° .018 GEH6C GE 6 FW GEH 6 CGE-8 C 8 16 8 5 15° .020 GE8C GE 8 UK GE 8 CGEH-8 C 8 19 11 6 21° .031 GEH8C GE 8 FW GEH 8 C

GE-10 C 10 19 9 6 12° .030 GE10C GE 10 UK GE 10 CGEH-10 C 10 22 12 7 18° .040 GEH10C GE 10 FW GEH 10 CGE-12 C 12 22 10 7 11° .040 GE12C GE 12 UK GE 12 CGEH-12 C 12 26 15 9 18° .070 GEH12C GE 12 FW GEH 12 CGE-15 C 15 26 12 9 8° .070 GE15C GE 15 UK GE 15 C

GEH-15 C 15 30 16 10 16° .110 GEH15C GE 15 FW GEH 15 CGE-17 C 17 30 14 10 10° .110 GE17C GE 17 UK GE 17 CGEH-17 C 17 35 20 12 19° .200 GEH17C GE 17 FW GEH 17 CGE-20 C 20 35 16 12 9° .140 GE20C GE 20 UK GE 20 CGEH-20 C 20 42 25 16 17° .350 GEH20C GE 20 FW GEH 20 C

GE-25 C 25 42 20 16 7° .260 GE25C GE 25 UK GE 25 CGEH-25 C 25 47 28 18 17° .440 GEH25C GE 25 FW GEH 25 CGE-30 C 30 47 22 18 6° .350 GE30C GE 30 UK GE 30 C

NOTE:1.) Inner ring has hard chrome sliding surface. Outer ring sliding surface has PTFE-fabric coating. Other brands may have a liner of different material.

ina11a

D

GE..CGEH..C

d

C

B

396

SPHERICAL PLAIN BEARINGS - METRIC DIMENSIONS - HIGH CAPACITY - TWO SEALSConsolidated Dimensions Approx. Interchange

No. (Metric) Wgt.Angle of (lbs.)

d D B C Tilt ELGES FAG INA RBC SKF

*GE-17 C-2RS 17 30 14 10 10° .082 - - GE-17 UK-2RS - -*GE-20 C-2RS 20 35 16 12 9° .132 - - GE-20 UK-2RS - -*GE-25 C-2RS 25 42 20 16 7° .243 - - GE-25 UK-2RS - -*GE-30 C-2RS 30 47 22 18 6° .309 - - GE-30 UK-2RS - -*GEH-30 C-2RS 30 55 32 20 17° .617 - - GE-30 FW-2RS - -

*GE-35 C-2RS 35 55 25 20 7° .510 GE 35 UK-2RS GE-35 UK.2RS GE-35 UK-2RS MB35-FSS GE 35 TE-2RSGEH-35 C-2RS 35 62 35 22 16° .860 GE 35 FW-2RS - GE 35 FW-2RS - -

*GE-40 C-2RS 40 62 28 22 7° .710 GE 40 UK-2RS GE-40 UK.2RS GE-40 UK-2RS MB40-FSS GE 40 TE-2RSGEH-40 C-2RS 40 68 40 25 17° 1.147 GE 40 FW-2RS - GE 40 FW-2RS - -

*GE-45 C-2RS 45 68 32 25 7° 1.000 GE 45 UK-2RS GE-45 UK.2RS GE-45 UK-2RS MB45-FSS GE 45 TE-2RS

GEH-45 C-2RS 45 75 43 28 15° 1.499 GE 45 FW-2RS - GE 45 FW-2RS - -*GE-50 C-2RS 50 75 35 28 7° 1.250 GE 50 UK-2RS GE-50 UK.2RS GE-50 UK-2RS MB50-FSS GE 50 TE-2RSGEH-50 C-2RS 50 90 56 36 17° 3.087 GE 50 FW-2RS - GE 50 FW-2RS - -

*GE-60 C-2RS 60 90 44 36 7° 2.450 GE 60 UK-2RS GE-60 UK.2RS GE-60 UK-2RS MB60-FSS GE 60 TE-2RSGEH-60 C-2RS 60 105 63 40 17° 4.410 GE 60 FW-2RS - GE 60 FW-2RS - -

*GE-70 C-2RS 70 105 49 40 7° 3.400 GE 70 UK-2RS GE-70 UK.2RS GE-70 UK-2RS MB70-FSS GE 70 TE-2RSGEH-70 C-2RS 70 120 70 45 16° 6.395 GE 70 FW-2RS - GE 70 FW-2RS - -GE-80 C-2RS 80 120 55 45 7° 5.050 GE 80 UK-2RS GE-80 UK.2RS GE-80 UK-2RS MB80-FSS GE 80 TE-2RSGEH-80 C-2RS 80 130 75 50 14° 7.718 GE 80 FW-2RS - GE 80 FW-2RS - -

*GE-90 C-2RS 90 130 60 50 7° 6.050 GE 90 UK-2RS GE-90 UK.2RS GE-90 UK-2RS MB90-FSS GE 90 TE-2RS

GEH-90 C-2RS 90 150 85 55 15° 11.910 GE 90 FW-2RS - GE 90 FW-2RS - -*GE-100 C-2RS 100 150 70 55 7° 9.700 GE 100 UK-2RS GE-100 UK.2RS GE-100 UK-2RS MB100-FSS GE 100 TA-2RSGEH-100 C-2RS 100 160 85 55 14° 13.010 GE 100 FW-2RS - GE 100 FW-2RS - -GE-110 C-2RS 110 160 70 55 7° 10.500 GE 110 UK-2RS GE-110 UK.2RS GE-110 UK-2RS MB110-FSS GE 100 TA-2RSGEH-110 C-2RS 110 180 100 70 12° 21.390 GE 110 FW-2RS - GE 110 FW-2RS - -

GE-120 C-2RS 120 180 85 70 7° 17.000 GE 120 UK-2RS GE-120 UK.2RS GE-120 UK-2RS MB120-FSS GE 120 TA-2RSGEH-120 C-2RS 120 210 115 70 16° 33.080 GE 120 FW-2RS - GE 120 FW-2RS - -GE-140 C-2RS 140 210 90 70 7° 24.500 GE 140 UK-2RS GE-140 UK.2RS GE-140 UK-2RS MB140-FSS GE 140 TA-2RSGEH-140 C-2RS 140 230 130 80 16° 40.790 GE 140 FW-2RS - GE 140 FW-2RS - -

*GE-160 C-2RS 160 230 105 80 7° 31.000 GE 160 UK-2RS GE-160 UK.2RS GE-160 UK-2RS MB160-9LFSS GE 160 TA-2RS

GEH-160 C-2RS 160 260 135 80 16° 55.130 GE 160 FW-2RS - GE 160 FW-2RS - -*GE-180 C-2RS 180 260 105 80 7° 41.000 GE 180 UK-2RS GE-180 UK.2RS GE-180 UK-2RS MB180-9LFSS GE 180 TA-2RSGE-180-2RS 180 290 155 100 14° 78.280 GE 180 FW-2RS - GE 180 FW-2RS - -

*GE-200 C-2RS 200 290 130 100 7° 61.500 GE 200 UK-2RS GE-200 UK.2RS GE-200 UK-2RS MB200-9LFSS GE 200 TA-2RSGEH-200 C-2RS 200 320 165 100 15° 99.230 GE 200 FW-2RS - GE 200 FW-2RS - -

*GE-220 C-2RS 220 320 135 100 7° 78.500 GE 220 UK-2RS GE-220 UK.2RS GE-220 UK-2RS MB220-9LFSS GE 220 TA-2RSGEH-220 C-2RS 220 340 175 100 16° 112.460 GE 220 FW-2RS - GE 220 FW-2RS - -GE-240 C-2RS 240 340 140 100 7° 88.000 GE 240 UK-2RS GE-240 UK.2RS GE-240 UK-2RS MB240-9LFSS GE 240 TA-2RSGEH-240 C-2RS 240 370 190 110 15° 141.120 GE 240 FW-2RS - GE 240 FW-2RS - -GE-260 C-2RS 260 370 150 110 7° 115.000 GE 260 UK-2RS GE-260 UK.2RS GE-260 UK-2RS MB260-9LFSS GE 260 TA-2RS

GEH-260 C-2RS 260 400 205 120 15° 178.610 GE 260 FW-2RS - GE 260 FW-2RS - -GE-280 C-2RS 280 400 155 120 7° 145.000 GE 280 UK-2RS GE-280 UK.2RS GE-280 UK-2RS MB280-9LFSS GE 280 TA-2RSGEH-280 C-2RS 280 430 210 120 15° 207.270 GE 280 FW-2RS - GE 280 FW-2RS - -GE-300 C-2RS 300 430 165 120 7° 175.000 GE 300 UK-2RS GE-300 UK.2RS GE-300 UK-2RS MB300-9LFSS GE 300 TA-2RS

*Also available shielded - suffix CSZZ.

NOTE:1.) GE..C-2RS - Split outer ring with seals.2.) Inner ring has hard chrome sliding surface. Outer ring sliding surface has PTFE-fabric coating. Other brands may have a liner of different material.

ina11b

GE..C-2RS

D d

C

BGE..C-2RS

GEH..C..2RS

ina17b

GEH..ES-2RS

D d

C

B

ina7b

GE..ES-2RS

D d

C

B

GE..ES-2RS GEH..ES-2RS

397

SPHERICAL PLAIN BEARINGS - STEEL ON STEEL - METRIC DIMENSIONS - TWO SEALSConsolidated Dimensions Approx. Interchange



GE-15 ES-2RS 15 26 12 9 10° .070 GE15ES.2RS - - -GE-17 ES-2RS 17 30 14 10 10° .110 GE17ES.2RS GE 17 DO-2RS MB17-SS -GE-20 ES-2RS 20 35 16 12 9° .150 GE20ES.2RS GE 20 DO-2RS MB17-SS GE 20 ES-2RSGE-25 ES-2RS 25 42 20 16 7° .270 GE25ES.2RS GE 25 DO-2RS MB17-SS GE 25 ES-2RSGE-30 ES-2RS 30 47 22 18 6° .360 GE30ES.2RS GE 30 DO-2RS MB17-SS GE 30 ES-2RS

GE-35 ES-2RS 35 55 25 20 6° .510 GE35ES.2RS GE 35 DO-2RS MB17-SS GE 35 ES-2RSGE-40 ES-2RS 40 62 28 22 7° .710 GE40ES.2RS GE 40 DO-2RS MB17-SS GE 40 ES-2RSGE-45 ES-2RS 45 68 32 25 7° 1.020 GE45ES.2RS GE 45 DO-2RS MB17-SS GE 45 ES-2RSGE-50 ES-2RS 50 75 35 28 6° 1.240 GE50ES.2RS GE 50 DO-2RS MB17-SS GE 50 ES-2RSGE-60 ES-2RS 60 90 44 36 6° 2.430 GE60ES.2RS GE 60 DO-2RS MB17-SS GE 60 ES-2RS

GE-70 ES-2RS 70 105 49 40 6° 3.420 GE70ES.2RS GE 70 DO-2RS MB17-SS GE 70 ES-2RSGE-80 ES-2RS 80 120 55 45 6° 5.070 GE80ES.2RS GE 80 DO-2RS MB17-SS GE 80 ES-2RSGE-90 ES-2RS 90 130 60 50 5° 6.070 GE90ES.2RS GE 90 DO-2RS MB17-SS GE 90 ES-2RSGE-100 ES-2RS 100 150 70 55 7° 9.700 GE100ES.2RS GE 100 DO-2RS MB17-SS GE 100 ES-2RSGE-110 ES-2RS 110 160 70 55 6° 10.590 GE110ES.2RS GE 110 DO-2RS MB17-SS GE 110 ES-2RS



NOTE:1.) GE..ES-2RS - Split outer ring with lubrication holes and seals.

SPHERICAL PLAIN BEARINGS - STEEL ON STEEL - METRIC DIMENSIONS - TWO SEALSFAG ELGES INA SKF

GEH-15 ES-2RS 15 30 16 10 16° .101 - - GE 15 FO-2RS -GEH-17 ES-2RS 17 30 14 10 19° .110 - - GE 17 FO-2RS -GEH-20 ES-2RS 20 42 25 16 17° .330 GE20FO.2RS GE 20 FO-2RS GE 20 FO-2RS GEH-20 ES-2RSGEH-25 ES-2RS 25 47 28 18 17° .420 GE25FO.2RS GE 25 FO-2RS GE 25 FO-2RS GEH-25 ES-2RSGEH-30 ES-2RS 30 55 32 20 17° .780 GE30FO.2RS GE 30 FO-2RS GE 30 FO-2RS GEH-30 ES-2RS

GEH-35 ES-2RS 35 62 35 22 16° 1.040 GE35FO.2RS GE 35 FO-2RS GE 35 FO-2RS GEH-35 ES-2RSGEH-40 ES-2RS 40 68 40 25 17° 1.350 GE40FO.2RS GE 40 FO-2RS GE 40 FO-2RS GEH-40 ES-2RGEH-45 ES-2RS 45 75 43 28 15° 1.770 GE45FO.2RS GE 45 FO-2RS GE 45 FO-2RS GEH-45 ES-2RSGEH-50 ES-2RS 50 90 56 36 17° 3.530 GE50FO.2RS GE 50 FO-2RS GE 50 FO-2RS GEH-50 ES-2RSGEH-60 ES-2RS 60 105 63 40 17° 5.300 GE60FO.2RS GE 60 FO-2RS GE 60 FO-2RS GEH-60 ES-2RS

GEH-70 ES-2RS 70 120 70 45 16° 7.500 GE70FO.2RS GE 70 FO-2RS GE 70 FO-2RS GEH-70 ES-2RSGEH-80 ES-2RS 80 130 75 50 14° 9.040 GE80FO.2RS GE 80 FO-2RS GE 80 FO-2RS GEH-80 ES-2RSGEH-90 ES-2RS 90 150 85 55 15° 13.890 GE90FO.2RS GE 90 FO-2RS GE 90 FO-2RS GEH-90 ES-2RSGEH-100 ES-2RS 100 160 85 55 14° 15.000 GE100FO.2RS GE 100 FO-2RS GE 100 FO-2RS GEH-100 ES-2RSGEH-110 ES-2RS 110 180 100 70 12° 24.250 GE110FO.2RS GE 110 FO-2RS GE 110 FO-2RS GEH-110 ES-2RS

GEH-120 ES-2RS 120 210 115 70 16° 33.289 - - GE 120 FO-2RS -GEH-140 ES-2RS 140 230 130 80 16° 41.446 - - GE 140 FO-2RS -GEH-160 ES-2RS 160 260 135 80 16° 54.454 - - GE 160 FO-2RS -GEH-180 ES-2RS 180 290 155 100 14° 78.043 - - GE 180 FO-2RS -GEH-200 ES-2RS 200 320 165 100 15° 98.766 - - GE 200 FO-2RS -

GEH-220 ES-2RS 220 340 175 100 16° 112.214 - - GE 220 FO-2RS -GEH-240 ES-2RS 240 370 190 110 15° 143.079 - - GE 240 FO-2RS -GEH-260 ES-2RS 260 400 205 120 15° 180.116 - - GE 260 FO-2RS -GEH-280 ES-2RS 280 430 210 120 15° 212.744 - - GE 280 FO-2RS -

NOTE:1.) GEH..ES-2RS - Split outer ring with lubrication holes and seals.

398

ina29b

GEM..ES-2RS

D d

C

B

GEM..ES-2RS

SPHERICAL PLAIN BEARINGS - STEEL ON STEEL - METRIC DIMENSIONS - TWO SEALSConsolidated Dimensions Approx. Interchange

No. (Metric) Wgt.Angle of (lbs.)


GEM-17 ES-2RS 17 30 21 10 3° .130 GE17HO.2RS - MB17-ESS GEM 17 ES-2RSGEM-20 ES-2RS 20 35 24 12 3° .160 GE20HO.2RS GE 20 HO-2RS MB20-ESS GEM 20 ES-2RSGEM-25 ES-2RS 25 42 29 16 3° .290 GE25HO.2RS GE 25 HO-2RS MB25-ESS GEM 25 ES-2RSGEM-30 ES-2RS 30 47 30 18 3° .370 GE30HO.2RS GE 30 HO-2RS MB30-ESS GEM 30 ES-2RSGEM-35 ES-2RS 35 55 35 20 3° .550 GE35HO.2RS GE 35 HO-2RS MB35-ESS GEM 35 ES-2RS

GEM-40 ES-2RS 40 62 38 22 3° .770 GE40HO.2RS GE 40 HO-2RS MB40-ESS GEM 40 ES-2RSGEM-45 ES-2RS 45 68 40 25 3° 1.100 GE45HO.2RS GE 45 HO-2RS MB45-ESS GEM 45 ES-2RSGEM-50 ES-2RS 50 75 43 28 3° 1.300 GE50HO.2RS GE 50 HO-2RS MB50-ESS GEM 50 ES-2RSGEM-60 ES-2RS 60 90 54 36 3° 2.500 GE60HO.2RS GE 60 HO-2RS MB60-ESS GEM 60 ES-2RSGEM-70 ES-2RS 70 105 65 40 3° 3.600 GE70HO.2RS GE 70 HO-2RS MB70-ESS GEM 70 ES-2RS

GEM-80 ES-2RS 80 120 74 45 3° 5.500 GE80HO.2RS GE 80 HO-2RS MB80-ESS GEM 80 ES-2RS

NOTE:1.) GEM..ES-2RS series - Split outer ring with lubrication holes.

399

SPHERICAL PLAIN BEARINGS - STEEL ON STEEL - INCH DIMENSIONSConsolidated Dimensions Approx. Interchange

No. (Inch) Wgt.Angle of (lbs.)

d D B C Tilt INA RBC SKF Torrington

GEZ-008 ES .5000 .8750 .4375 .3750 14° .050 GE 12 ZO B8-L GEZ 008 ES 5SF8GEZ-010 ES .6250 1.0625 .5469 .4687 14° .080 GE 15 ZO B10-L GEZ 010 ES 6SF10GEZ-012 ES .7500 1.2500 .6562 .5625 14° .120 GE 19 ZO B12-L GEZ 012 ES 7SF12GEZ-014 ES .8750 1.4375 .7656 .6562 14° .190 GE 22 ZO B14-L GEZ 014 ES 8SF14GEZ-100 ES 1.0000 1.6250 .8750 .7500 13° .280 GE 25 ZO B16-L GEZ 100 ES 10SF16

GEZ-104 ES 1.2500 2.0000 1.0937 .9375 13° .510 GE 31 ZO B20-L GEZ 104 ES 12SF20GEZ-106 ES 1.3750 2.1875 1.1875 1.0312 13° .760 GE 34 ZO B22-L GEZ 106 ES 13SF22GEZ-108 ES 1.5000 2.4375 1.3125 1.1250 13° .930 GE 38 ZO B24-L GEZ 108 ES 15SF24GEZ-112 ES 1.7500 2.8125 1.5312 1.3125 13° 1.400 GE 44 ZO B28-L GEZ 112 ES 17SF28GEZ-200 ES 2.0000 3.1875 1.7500 1.5000 12° 2.050 GE 50 ZO B32-L GEZ 200 ES 20SF32

GEZ-204 ES 2.2500 3.5625 1.9687 1.6875 12° 2.850 GE 57 ZO B36-L GEZ 204 ES 22SF36GEZ-208 ES 2.5000 3.9375 2.1875 1.8750 12° 4.100 GE 63 ZO B40-L GEZ 208 ES 25SF40GEZ-212 ES 2.7500 4.3750 2.4062 2.0625 12° 5.350 GE 69 ZO B44-L GEZ 212 ES 27SF44GEZ-300 ES 3.0000 4.7500 2.6250 2.2500 12° 6.850 GE 76 ZO B48-L GEZ 300 ES 30SF48GEZ-304 ES 3.2500 5.1250 2.8437 2.4375 12° 8.630 GE 82 ZO B52-L GEZ 304 ES 32SF52

GEZ-308 ES 3.5000 5.5000 3.0625 2.6250 11° 10.650 GE 88 ZO B56-L GEZ 308 ES 35SF56GEZ-312 ES 3.7500 5.8750 3.2812 2.8125 11° 13.000 GE 95 ZO B60-L GEZ 312 ES 37SF60GEZ-400 ES 4.0000 6.2500 3.5000 3.0000 11° 15.590 GE 101 ZO B64-L GEZ 400 ES 40SF64GEZ-408 ES 4.5000 7.0000 3.9375 3.3750 7° 21.920 GE 114 ZO B72-L GEZ 408 ES 45SF72GEZ-412 ES 4.7500 7.3750 4.1562 3.5625 7° 25.600 GE 120 ZO - GEZ 412 ES 47SF76

GEZ-500 ES 5.0000 7.7500 4.3750 3.7500 7° 29.710 GE 127 ZO B80-L GEZ 500 ES 50SF80GEZ-600 ES 6.0000 8.7500 4.7500 4.1250 7° 38.800 GE 152 ZO B96-L GEZ 600 ES 60SF96

NOTE:1.) GEZ..ES - Split outer ring with lubrication holes.

ina33a

D d

C

B

GEZ..ESGEZ..ES

400

ina33b

GEZ..ES-2RS

D d

C

B

GEZ..ES-2RS

SPHERICAL PLAIN BEARINGS - STEEL ON STEEL - INCH DIMENSIONS - TWO SEALS

Consolidated Dimensions Approx. InterchangeNo. (Inch) Wgt.

Angle of (lbs.)d D B C Tilt ELGES RBC SKF Torrington

GEZ-100 ES-2RS 1.0000 1.6250 .8750 .7500 7° .280 GE 25 ZO 2RS B16-LSS GEZ 100 ES-2RS 10SF16-TTGEZ-104 ES-2RS 1.2500 2.0000 1.0937 .9375 7° .510 GE 31 ZO 2RS B20-LSS GEZ 104 ES-2RS 12SF20-TTGEZ-106 ES-2RS 1.3750 2.1875 1.1875 1.0312 7° .760 GE 34 ZO 2RS B22-LSS GEZ 106 ES-2RS 13SF22-TTGEZ-108 ES-2RS 1.5000 2.4375 1.3125 1.1250 7° .930 GE 38 ZO 2RS B24-LSS GEZ 108 ES-2RS 15SF24-TTGEZ-112 ES-2RS 1.7500 2.8125 1.5312 1.3125 7° 1.400 GE 44 ZO 2RS B28-LSS GEZ 112 ES-2RS 17SF28-TT

GEZ-200 ES-2RS 2.0000 3.1875 1.7500 1.5000 7° 2.050 GE 50 ZO 2RS B32-LSS GEZ 200 ES-2RS 20SF32-TTGEZ-204 ES-2RS 2.2500 3.4375 1.9687 1.6875 7° 2.850 GE 57 ZO 2RS B36-LSS GEZ 204 ES-2RS 22SF36-TTGEZ-208 ES-2RS 2.5000 3.9375 2.1875 1.8750 7° 4.100 GE 63 ZO 2RS B40-LSS GEZ 208 ES-2RS 25SF40-TTGEZ-212 ES-2RS 2.7500 4.3750 2.4062 2.0625 7° 5.350 GE 69 ZO 2RS B44-LSS GEZ 212 ES-2RS 27SF44-SSGEZ-300 ES-2RS 3.0000 4.7500 2.6250 2.2500 7° 6.850 GE 76 ZO 2RS B48-LSS GEZ 300 ES-2RS 30SF-48-SS

GEZ-304 ES-2RS 3.2500 5.1250 2.8437 2.4375 7° 8.630 GE 82 ZO 2RS B52-LSS GEZ 304 ES-2RS 32SF52-SSGEZ-308 ES-2RS 3.5000 5.5000 3.0625 2.6250 7° 10.650 GE 88 ZO 2RS B56-LSS GEZ 308 ES-2RS 35SF56-SSGEZ-312 ES-2RS 3.7500 5.8750 3.2812 2.8125 7° 13.000 GE 95 ZO 2RS B60-LSS GEZ 312 ES-2RS 37SF60-SSGEZ-400 ES-2RS 4.0000 6.2500 3.5000 3.0000 7° 15.590 GE 101 ZO 2RS B64-LSS GEZ 400 ES-2RS 40SF64-SSGEZ-408 ES-2RS 4.5000 7.0000 3.9375 3.3750 7° 21.920 GE 114 ZO 2RS B72-9LSS GEZ 408 ES-2RS 45SF72-SS

GEZ-412 ES-2RS 4.7500 7.3750 4.1562 3.5625 7° 25.600 - - GEZ 412 ES-2RS 47SF76-SSGEZ-500 ES-2RS 5.0000 7.7500 4.3750 3.7500 7° 29.710 GE 127 ZO 2RS B80-9LSS GEZ-500 ES-2RS 50SF80-SSGEZ-600 ES-2RS 6.0000 8.7500 4.7500 4.1250 7° 38.800 GE 152 ZO 2RS B96-9LSS GEZ 600 ES-2RS 60SF96-SS

NOTE:1.) GEZ..ES-2RS - Split outer ring with lubrication holes and seals.

SPHERICAL PLAIN BEARINGS - HIGH CAPACITY - INCH DIMENSIONS - TWO SEALSConsolidated Dimensions Approx. Interchange

No. (Inch) Wgt.Angle of (lbs.)

d D B C Tilt RBC SKF

GEZ-100 C-2RS 1.0000 1.6250 .8750 .7500 7° .280 B16-LNMSS GEZ 100 TE.2RSGEZ-104 C-2RS 1.2500 2.0000 1.0937 .9375 7° .510 B20-LNMSS GEZ 104 TE.2RSGEZ-106 C-2RS 1.3750 2.1875 1.1875 1.0312 7° .760 B22-LNMSS GEZ 106 TE.2RSGEZ-108 C-2RS 1.5000 2.4375 1.3125 1.1250 7° .930 B24-LNMSS GEZ 108 TE.2RSGEZ-112 C-2RS 1.7500 2.8125 1.5312 1.3125 7° 1.400 B28-LNMSS GEZ 112 TE.2RS

GEZ-200 C-2RS 2.0000 3.1875 1.7500 1.5000 7° 2.050 B32-LNMSS GEZ 200 TE.2RSGEZ-204 C-2RS 2.2500 3.5625 1.9687 1.6875 7° 2.850 B36-LNMSS GEZ 204 TE.2RSGEZ-208 C-2RS 2.5000 3.9375 2.1875 1.8750 7° 4.100 B40-LNMSS GEZ 208 TE.2RSGEZ-212 C-2RS 2.7500 4.3750 2.4062 2.0625 7° 5.350 B44-LNMSS GEZ 212 TE.2RSGEZ-300 C-2RS 3.0000 4.7500 2.6250 2.2500 7° 6.850 B48-LNMSS GEZ 300 TE.2RS

GEZ-304 C-2RS 3.2500 5.1250 2.8437 2.4375 7° 8.630 B52-LNMSS GEZ 304 TE 2RSGEZ-308 C-2RS 3.5000 5.5000 3.0625 2.6250 7° 10.650 B56-LNMSS GEZ 308 TE.2RSGEZ-312 C-2RS 3.7500 5.8750 3.2812 2.8125 7° 13.000 B60-LNMSS GEZ 312 TE.2RSGEZ-400 C-2RS 4.0000 6.2500 3.5000 3.0000 7° 15.590 B64-LNMSS GEZ 400 TE.2RSGEZ-408 C-2RS 4.5000 7.0000 3.9375 3.3750 7° 21.920 B72-9LNMSS GEZ 408 TE.2RS

GEZ-412 C-2RS 4.7500 7.3750 4.1562 3.5625 7° 25.600 - GEZ 412 TE.2RSGEZ-500 C-2RS 5.0000 7.7500 4.3750 3.7500 7° 29.710 B80-9LNMSS GEZ 500 TE.2RSGEZ-600 C-2RS 6.0000 8.7500 4.7500 4.1250 7° 38.800 B96-9LNMSS GEZ 600 TE.2RS

NOTE:1.) Inner ring has a hard chrome sliding surface. Outer ring sliding surface has PTFE-fabric coating. Other brands may have a liner of different material.

ina11b

GE..C-2RS

D d

C

B

GEZ..C-2RS

401

SPHERICAL PLAIN BEARINGS - ANGULAR CONTACT - STEEL ON STEEL - METRIC DIMENSIONSConsolidated Dimensions Approx. Interchange

No. (Metric) Wgt.(lbs.) ELGES

d D B C T INA RBC

GE-25 SX 25 47 14 14 15 .290 GE 25 SX MB25-SAGE-28 SX 28 52 15 15 16 .380 GE 28 SX -GE-30 SX 30 55 16 16 17 .470 GE 30 SX MB30-SAGE-32 SX 32 58 16 16 17 .510 GE 32 SX -GE-35 SX 35 62 17 17 18 .600 GE 35 SX MB35-SA

GE-40 SX 40 68 18 18 19 .710 GE 40 SX MB40-SAGE-45 SX 45 75 19 19 20 .910 GE 45 SX MB45-SAGE-50 SX 50 80 19 19 20 1.000 GE 50 SX MB50-SAGE-55 SX 55 90 22 22 23 1.480 GE 55 SX MB55-SAGE-60 SX 60 95 22 22 23 1.590 GE 60 SX MB60-SA

GE-65 SX 65 100 22 22 23 1.680 GE 65 SX MB65-SAGE-70 SX 70 110 24 24 25 2.210 GE 70 SX MB70-SAGE-75 SX 75 115 24 24 25 2.430 GE 75 SX -GE-80 SX 80 125 27 27 29 3.310 GE 80 SX MB80-SAGE-85 SX 85 130 27 27 29 3.530 GE 85 SX -

GE-90 SX 90 140 30 30 32 4.630 GE 90 SX MB90-SAGE-95 SX 75 145 30 30 32 4.850 GE 95 SX -GE-100 SX 100 150 30 30 32 5.070 GE 100 SX MB100-SAGE-105 SX 105 160 33 33 35 6.400 GE 105 SX -GE-110 SX 110 170 36 36 38 7.940 GE 110 SX MB110-SA

GE-120 SX 120 180 36 36 38 8.600 GE 120 SX MB120-SAGE-130 SX 130 200 42 42 45 13.010 GE 130 SX MB130-SAGE-140 SX 140 210 42 42 45 13.890 GE 140 SX MB140-SAGE-150 SX 150 225 45 45 48 16.980 GE 150 SX MB150-SAGE-160 SX 160 240 48 48 51 20.730 GE 160 SX MB160-SA

GE-170 SX 170 260 54 54 57 26.460 GE 170 SX MB170-SAGE-180 SX 180 280 61 61 64 37.480 GE 180 SX MB180-SAGE-190 SX 190 290 61 61 64 39.690 GE 190 SX -GE-200 SX 200 310 66 66 70 49.610 GE 200 SX -GE-220 SX 220 340 72 72 76 65.040 GE 220 SX -

GE-240 SX 240 360 72 72 76 69.450 GE 240 SX -

NOTE:1.) Non-critical dimensions, such as the “B” and “C” dimensions, may vary slightly between manufacturers.

ina45a

B

d

C

GE..SX

D

T

GE..SX

402

SPHERICAL PLAIN BEARINGS - ANGULAR CONTACT - HIGH CAPACITY - METRIC DIMENSIONSConsolidated Dimensions Approx. Interchange

No. (Metric) Wgt.(lbs.) ELGES

d D B C T INA SKF

GE-25 SW 25 47 14 14 15 .310 GE 25 SW GAC 25 FGE-28 SW 28 52 15 15 16 .400 GE 28 SW GAC 28 FGE-30 SW 30 55 16 16 17 .490 GE 30 SW GAC 30 FGE-32 SW 32 58 16 16 17 .530 GE 32 SW GAC 32 FGE-35 SW 35 62 17 17 18 .620 GE 35 SW GAC 35 F

GE-40 SW 40 68 18 18 19 .750 GE 40 SW GAC 40 FGE-45 SW 45 75 19 19 20 .950 GE 45 SW GAC 45 FGE-50 SW 50 80 19 19 20 1.040 GE 50 SW GAC 50 FGE-55 SW 55 90 22 22 23 1.550 GE 55 SW GAC 55 FGE-60 SW 60 95 22 22 23 1.660 GE 60 SW GAC 60 F

GE-65 SW 65 100 22 22 23 1.740 GE 65 SW GAC 65 FGE-70 SW 70 110 24 24 25 2.210 GE 70 SW GAC 70 FGE-75 SW 75 115 24 24 25 2.430 GE 75 SW GAC 75 FGE-80 SW 80 125 27 27 29 3.520 GE 80 SW GAC 80 FGE-85 SW 85 130 27 27 29 3.750 GE 85 SW GAC 85 F

GE-90 SW 90 140 30 30 32 4.850 GE 90 SW GAC 90 FGE-95 SW 95 145 30 30 32 5.070 GE 95 SW GAC 95 FGE-100 SW 100 150 30 30 32 5.300 GE 100 SW GAC 100 FGE-105 SW 105 160 33 33 35 6.620 GE 105 SW GAC 105 FGE-110 SW 110 170 36 36 38 8.160 GE 110 SW GAC 110 F

GE-120 SW 120 180 36 36 38 8.820 GE 120 SW GAC 120 FGE-130 SW 130 200 42 42 45 13.230 GE 130 SW -GE-140 SW 140 210 42 42 45 14.110 GE 140 SW -GE-150 SW 150 225 45 45 48 17.420 GE 150 SW -GE-160 SW 160 240 48 48 51 21.170 GE 160 SW -

GE-170 SW 170 260 54 54 57 28.660 GE 170 SW -GE-180 SW 180 280 61 61 64 38.580 GE 180 SW -GE-190 SW 190 290 61 61 64 39.690 GE 190 SW -GE-200 SW 200 310 66 66 70 50.710 GE 200 SW -GE-220 SW 220 340 72 72 76 66.140 GE 220 SW -

GE-240 SW 240 360 72 72 76 71.650 GE 240 SW -GE-260 SW 260 400 83 83 87 105.820 GE 260 SW -GE-280 SW 280 420 83 83 87 112.440 GE 280 SW -GE-300 SW 300 460 96 96 100 160.940 GE 300 SW -

NOTE:1.) Inner ring has a hard chrome sliding surface. Outer ring sliding surface has PTFE-fabric coating. Other brands may have a liner of different material.2.) Non-critical dimensions, such as the “B” and “C” dimensions, may vary slightly between manufacturers.

ina47a

T

B

d

C

GE..SW

D

GE..SW

403

ina39a

H CB

d

D

GE..AX

SPHERICAL PLAIN BEARINGS - THRUST - STEEL ON STEEL - METRIC DIMENSIONSConsolidated Dimensions Approx. Interchange


d D B C H Tilt INA

GE-10 AX 10 30 7.9 6 9.5 10° .090 GE 10 AXGE-12 AX 12 35 9.3 9 13.0 9° .160 GE 12 AXGE-15 AX 15 42 10.7 11 15.0 7° .270 GE 15 AXGE-17 AX 17 47 11.5 11 16.0 6° .360 GE 17 AXGE-20 AX 20 55 14.3 13 20.0 6° .550 GE 20 AX

GE-25 AX 25 62 16.0 17 22.5 7° .840 GE 25 AXGE-30 AX 30 75 18.0 19 26.0 6° 1.440 GE 30 AXGE-35 AX 35 90 22.0 20 28.0 6° 2.210 GE 35 AXGE-40 AX 40 105 27.0 22 32.0 6° 3.530 GE 40 AXGE-45 AX 45 120 31.0 25 36.5 6° 5.290 GE 45 AX

GE-50 AX 50 130 33.5 32 42.5 5° 7.280 GE 50 AXGE-60 AX 60 150 37.0 33 45.0 7° 9.920 GE 60 AXGE-70 AX 70 160 40.0 36 50.0 6° 12.130 GE 70 AXGE-80 AX 80 180 42.0 36 50.0 6° 15.430 GE 80 AXGE-100 AX 100 210 50.0 42 59.0 7° 23.150 GE 100 AX

GE-120 AX 120 230 52.0 45 64.0 8° 28.660 GE 120 AXGE-140 AX 140 260 61.0 50 72.0 6° 39.690 GE 140 AXGE-160 AX 160 290 65.0 52 77.0 7° 50.710 GE 160 AXGE-180 AX 180 320 70.0 60 86.0 8° 68.350 GE 180 AXGE-200 AX 200 340 74.0 60 87.0 8° 74.960 GE 200 AX

NOTE:1.) Non-critical dimensions, such as the “B” and “C” dimensions, may vary slightly between manufacturers.

404

ina41a

H CB

d

D

GE..AW

SPHERICAL PLAIN BEARINGS - THRUST - HIGH CAPACITY - METRIC DIMENSIONSConsolidated Dimensions Approx. Interchange


d D B C H Tilt INA SKF

GE-10 AW 10 30 7.9 6 9.5 10° .090 GE 10 AW GX10FGE-12 AW 12 35 9.3 9 13.0 9° .160 GE 12 AW GX12FGE-15 AW 15 42 10.7 11 15.0 7° .270 GE 15 AW GX15FGE-17 AW 17 47 11.5 11 16.0 6° .360 GE 17 AW GX17FGE-20 AW 20 55 14.3 13 20.0 6° .560 GE 20 AW GX20F

GE-25 AW 25 62 16.0 17 22.5 7° .840 GE 25 AW GX25FGE-30 AW 30 75 18.0 19 26.0 6° 1.440 GE 30 AW GX30FGE-35 AW 35 90 22.0 20 28.0 6° 2.050 GE 35 AW GX35FGE-40 AW 40 105 27.0 22 32.0 6° 3.530 GE 40 AW GX40FGE-45 AW 45 120 31.0 25 36.5 6° 5.300 GE 45 AW GX45F

GE-50 AW 50 130 33.5 32 42.5 5° 7.280 GE 50 AW GX50FGE-60 AW 60 150 37.0 33 45.0 7° 9.920 GE 60 AW GX60FGE-70 AW 70 160 40.0 36 50.0 6° 12.130 GE 70 AW GX70FGE-80 AW 80 180 42.0 36 50.0 6° 15.440 GE 80 AW GX80FGE-100 AW 100 210 50.0 42 59.0 7° 23.150 GE 100 AW GX100F

GE-120 AW 120 230 52.0 45 64.0 8° 28.660 GE 120 AW GX120FGE-140 AW 140 260 61.0 50 72.0 6° 39.690 GE 140 AW -GE-160 AW 160 290 65.0 52 77.0 7° 50.710 GE 160 AW -GE-180 AW 180 320 70.0 60 86.0 8° 68.350 GE 180 AW -GE-200 AW 200 340 74.0 60 87.0 8° 74.960 GE 200 AW -

GE-220 AW 220 370 82.0 67 97.0 7° 98.110 GE 220 AW -GE-240 AW 240 400 87.0 73 103.0 6° 121.260 GE 240 AW -GE-260 AW 260 430 95.0 80 115.0 7° 152.120 GE 260 AW -GE-280 AW 280 460 100.0 85 110.0 4° 180.780 GE 280 AW -GE-300 AW 300 480 100.0 90 110.0 3° 191.800 GE 300 AW -

GE-320 AW 320 520 105.0 91 116.0 4° 240.310 GE 320 AW -GE-340 AW 340 540 105.0 91 116.0 4° 251.330 GE 340 AW -GE-360 AW 360 560 115.0 95 125.0 4° 284.400 GE 360 AW -

NOTE:1.) Inner ring has a hard chrome sliding surface. Outer ring sliding surface has PTFE-fabric coating. Other brands may have a liner of different material.2.) Non-critical dimensions, such as the “B” and “C” dimensions, may vary slightly between manufacturers.

405

ROD ENDS - METRIC DIMENSIONS - STEEL ON STEEL WITH MALE THREADSConsolidated Dimensions Approx. Interchange

No. (Metric) Wgt.(lbs.)

Right Hand Left HandThread Thread d A B C G G1 H ELGES FAG SKF

SA 6 E SAL 6 E 6 21 6 4 M6x1 16 36 .030 GAR 6 DO GAL 6 DO SA 6E SAL6E SA 6 E SAL 6 ESA 8 E SAL 8 E 8 24 8 5 M8x1.25 21 42 .060 GAR 8 DO GAL 8 DO SA 8E SAL8E SA 8 E SAL 8 ESA 10 E SAL 10 E 10 29 9 6 M10x1.5 26 48 .100 GAR 10 DO GAL 10 DO SA 10E SAL10E SA 10 E SAL 10 ESA 12 E SAL 12 E 12 34 10 7 M12x1.75 28 54 .140 GAR 12 DO GAL 12 DO SA 12E SAL12E SA 12 E SAL 12 ESA 15 ES SAL 15 ES 15 40 12 9 M14x2 34 63 .260 GAR 15 DO GAL 15 DO SA15ES SAL15ES SA 15 ES SAL 15 ES

* SA 17 ES SAL 17 ES 17 46 14 10 M16x2 36 69 .370 GAR 17 DO GAL 17 DO SA17ES SAL17ES SA 17 ES SAL 17 ES* SA 20 ES SAL 20 ES 20 53 16 12 M20x1.5 43 78 .610 GAR 20 DO GAL 20 DO SA20ES SAL20ES SA 20 ES SAL 20 ES* SA 25 ES SAL 25 ES 25 64 20 16 M24x2 53 94 1.100 GAR 25 DO GAL 25 DO SA25ES SAL25ES SA 25 ES SAL 25 ES* SA 30 ES SAL 30 ES 30 73 22 18 M30x2 65 110 1.850 GAR 30DO GAL 30 DO SA30ES SAL30ES SA 30 ES SAL 30 ES* SA 35 ES SAL 35 ES 35 82 25 20 M36x3 82 130 2.850 GAR 35 DO GAL 35 DO - - SA 35 ES SAL 35 ES

SAC 40 ES SALC 40 ES 40 92 28 23 M39x3 86 150 3.968 GAR 40 DO GAL 40 DO - - - -* SA 40 ES SAL 40 ES 40 92 28 22 M42x3 90 145 4.200 - - - - SA 40 ES SAL 40 ESSAC 45 ES SALC 45 ES 45 102 32 27 M42x3 94 163 5.732 GAR 45 DO GAL 45 DO - - - -

* SA 45 ES SAL 45 ES 45 102 32 25 M45x3 95 185 5.600 - - - - SA 45 ES SAL 45 ESSAC 50 ES SALC 50 ES 50 112 35 30 M45x3 107 185 7.500 GAR 50 DO GAL 50 DO - - - -

* SA 50 ES SAL 50 ES 50 112 35 28 M52x3 110 195 8.100 - - - - SA 50 ES SAL 50 ESSAC 60 ES SALC 60 ES 60 135 44 38 M52X3 115 210 13.000 GAR 60 DO GAL 60 DO - - - -

* SA 60 ES SAL 60 ES 60 135 44 36 M60x4 120 225 13.500 - - - - SA 60 ES SAL 60 ESSAC 70 ES SALC 70 ES 70 160 49 42 M56x4 125 235 18.000 GAR 70 DO GAL 70 DO - - - -

* SA 70 ES SAL 70 ES 70 160 49 40 M72x4 132 265 22.000 - - - - SA 70 ES SAL 70 ES

SAC 80 ES SALC 80 ES 80 180 55 47 M64x4 140 270 26.500 GAR 80 DO GAL 80 DO - - - -* SA 80 ES SAL 80 ES 80 180 55 45 M80x4 147 295 32.000 - - - - SA 80 ES SAL 80 ES

ROD ENDS - METRIC DIMENSIONS - STEEL ON STEEL WITH FEMALE THREADS

SI 6 E SIL 6 E 6 21 6 4 M6x1 11 30 .040 GIR 6 DO GIL 6 DO SI6E SIL6E SI 6 E SIL 6 ESI 8 E SIL 8 E 8 24 8 5 M8x1.25 15 36 .080 GIR 8 DO GIL 8 DO SI8E SIL8E SI 8 E SIL 8 ESI 10 E SIL 10 E 10 29 9 6 M10x1.5 15 43 .130 GIR 10 DO GIL 10 DO SI10E SIL10E SI 10 E SIL 10 ESI 12 E SIL 12 E 12 34 10 7 M12x1.75 18 50 .200 GIR 12 DO GIL 12 DO SI12E SIL12E SI 12 E SIL 12 ESI 15 ES SIL 15 ES 15 40 12 9 M14x2 21 61 .350 GIR 15 DO GIL 15 DO SI15ES SIL15ES SI 15 ES SIL 15 ES

* SI 17 ES SIL 17 ES 17 46 14 10 M16x2 24 67 .500 GIR 17 DO GIL 17 DO SI17ES SIL17ES SI 17 ES SIL 17 ES* SI 20 ES SIL 20 ES 20 53 16 12 M20x1.5 30 77 .700 GIR 20 DO GIL 20 DO SI20ES SIL20ES SI 20 ES SIL 20 ES* SI 25 ES SIL 25 ES 25 64 20 16 M24x2 36 94 1.350 GIR 25 DO GIL 25 DO SI25ES SIL25ES SI 25 ES SIL 25 ES* SI 30 ES SIL 30 ES 30 73 22 18 M30x2 45 110 2.150 GIR 30 DO GIL 30 DO SI30ES SIL30ES SI 30 ES SIL 30 ES* SI 35 ES SIL 35 ES 35 82 25 20 M36x3 54 130 3.100 GIR 35 DO GIL 35 DO - - SI 35 ES SIL 35 ES

SIC 40 ES SILC 40 ES 40 92 28 23 M39x3 65 142 4.409 GIR 40 DO GIL 40 DO - - - -* SI 40 ES SIL 40 ES 40 92 28 22 M42x3 63 145 4.850 - - - - SI 40 ES SIL 40 ESSIC 45 ES SILC 45 ES 45 102 32 27 M42x3 65 145 5.500 GIR 45 DO GIL 45 DO - - - -

* SI 45 ES SIL 45 ES 45 102 32 25 M45x3 65 165 7.050 - - - - SI 45 ES SIL 45 ESSIC 50 ES SILC 50 ES 50 112 35 30 M45x3 68 160 7.716 GIR 50 DO GIL 50 DO - - - -

* SI 50 ES SIL 50 ES 50 112 35 28 M52x3 68 195 9.000 - - - - SI 50 ES SIL 50 ESSIC 60 ES SILC 60 ES 60 135 44 38 M52X3 70 175 12.125 GIR 60 DO GIL 60 DO - - - -

* SI 60 ES SIL 60 ES 60 135 44 36 M60x4 70 225 15.500 - - - - SI 60 ES SIL 60 ESSIC 70 ES SILC 70 ES 70 160 49 42 M56x4 80 200 18.960 GIR 70 DO GIL 70 DO - - - -

* SI 70 ES SIL 70 ES 70 160 49 40 M72x4 80 265 23.000 - - - - SI 70 ES SIL 70 ES

SIC 80 ES SILC 80 ES 80 180 55 47 M64x4 85 230 26.500 GIR 80 DO GIL 80 DO - - - -* SI 80 ES SIL 80 ES 80 180 55 45 M80x4 85 295 33.000 - - - - SI 80 ES SIL 80 ES

*Available sealed add suffix - "2RS".

NOTE:1.) Suffix "E" - without relubrication holes.2.) Suffix "ES" - with relubrication holes.

ina51a

A

H25°

ina52a

B

G

C

d

G1

ina53a

A

H34°

ina50a

G

d

B

C

G1

406

ina52a

B

G

C

d

G1

ina53a

A

H34°

ina50a

G

d

B

C

G1

ina51a

A

H25°

ROD ENDS - METRIC DIMENSIONS - HIGH CAPACITY WITH MALE THREADSConsolidated Dimensions Approx. Interchange

No. (Metric) Wgt.(lbs.)

Right Hand Left HandThread Thread d A B C G G1 H ELGES SKF

SA 6 C SAL 6 C 6 21 6 5 M6x1 18 36 .037 GAR 6 UK GAL 6 UK SA 6 C SAL 6 CSA 8 C SAL 8 C 8 24 8 6 M8x1.25 18 36 .064 GAR 8 UK GAL 8 UK SA 8 C SAL 6 CSA 10 C SAL 10 C 10 29 9 7 M10x1.5 26 48 .112 GAR 10 UK GAL10 UK SA 10 C SAL 6 CSA 12 C SAL 12 C 12 34 10 8 M12x1.75 28 54 .190 GAR 12 UK GAL 12 UK SA 12 C SAL 6 CSA 15 C SAL 15 C 15 40 12 10 M14x2 34 63 .309 GAR 15 UK GAL15 UK SA 15 C SAL 6 C

SA 17 C SAL 17 C 17 46 14 11 M16x2 36 69 .419 GAR 17 UK GAL 17 UK SA 17 C SAL 6 CSA 20 C SAL 20 C 20 53 16 13 M20x1.5 43 78 .683 GAR 20 UK GAL 20 UK SA 20 C SAL 6 CSA 25 C SAL 25 C 25 64 20 17 M24x2 53 94 1.235 GAR 25 UK GAL 25 UK SA 25 C SAL 6 CSA 30 C SAL 30 C 30 73 22 19 M30x2 65 110 1.962 GAR 30 UK GAL 30 UK SA 30 C SAL 6 CSA 35 C SAL 35 C 35 82 25 21 M36x3 82 140 3.086 GAR 35 UK GAL 35 UK SA 35 C SAL 6 C

SAC 40 C SALC 40 C 40 92 28 23 M39x3 86 150 3.968 GAR 40 UK GAL 40 UK - -SA 40 C SAL 40 C 40 92 28 23 M42x3 86 150 4.200 - - SA 40 C SAL 6 CSAC 45 C SALC 45 C 45 102 32 27 M42x3 94 163 5.732 GAR 45 UK GAL 45 UK - -SA 45 C SAL 45 C 45 102 32 27 M45x3 94 163 5.600 - - SA 45 C SAL 6 CSAC 50 C SALC 50 C 50 112 35 30 M45x3 107 185 7.500 GAR 50 UK GAL 50 UK - -

SA 50 C SAL 50 C 50 112 35 30 M52x3 107 185 8.100 - - SA 50 C SAL 6 CSAC 60 C SALC 60 C 60 135 44 38 M52x3 115 210 13.000 GAR 60 UK GAL 60 UK - -SA 60 C SAL 60 C 60 135 44 38 M60x4 115 210 13.500 - - SA 60 C SAL 6 CSAC 70 C SAL 70 C 70 160 49 42 M56x4 125 235 18.000 GAR 70 UK GAL 70 UK - -SA 70 C SALC 70 C 70 160 49 42 M72x4 125 235 22.000 - - SA 70 C SAL 6 C

SAC 80 C SALC 80 C 80 180 55 47 M64x4 140 270 26.500 GAR 80 UK GAL 80 UK - -SA 80 C SAL 80 C 80 180 55 47 M80x4 140 270 32.000 - - SA 80 C SAL 6 C

ROD ENDS - METRIC DIMENSIONS - HIGH CAPACITY WITH FEMALE THREADS

SI 6 C SIL 6 C 6 21 6 5 M6x1 11 30 .046 GIR 6 UK GIL 6 UK SI 6 C SI L6 CSI 8 C SIL 8 C 8 24 8 6 M8x1.25 15 36 .086 GIR 8 UK GIL 8 UK SI 8 C SI L8 CSI 10 C SIL 10 C 10 29 9 7 M10x1.5 20 43 .134 GIR 10 UK GIL 10 UK SI 10 C SI L10 CSI 12 C SIL 12 C 12 34 10 8 M12x1.75 23 50 .212 GIR 12 UK GIL 12 UK SI 12 C SI L12 CSI 15 C SIL 15 C 15 40 12 10 M14x2 30 61 .397 GIR 15 UK GIL 15 UK SI 15 C SI L15 C

SI 17 C SIL 17 C 17 46 14 11 M16x2 34 67 .485 GIR 17 UK GIL 17 UK SI 17 C SI L17 CSI 20 C SIL 20 C 20 53 16 13 M20x1.5 40 77 .772 GIR 20 UK GIL 20 UK SI 20 C SI L20 CSI 25 C SIL 25 C 25 64 20 17 M24x2 48 94 1.411 GIR 25 UK GIL 25 UK SI 25 C SI L25 CSI 30 C SIL 30 C 30 73 22 19 M30x2 56 110 2.050 GIR 30 UK GIL 30 UK SI 30 C SI L30 CSI 35 C SIL 35 C 35 82 25 21 M36x3 60 125 2.866 GIR 35 UK GIL 35 UK SI 35 C SI L35 C

SIC 40 C SILC 40 C 40 92 28 23 M39x3 65 142 4.409 GIR 40 UK GIL 40 UK - -SI 40 C SIL 40 C 40 92 28 23 M42x3 65 142 4.850 - - SI 40 C SI L40 CSIC 45 C SILC 45 C 45 102 32 27 M42x3 65 145 5.512 GIR 45 UK GIL 45 UK - -SI 45 C SIL 45 C 45 102 32 27 M45x3 65 145 7.050 - - SI 45 C SI L45CSIC 50 C SILC 50 C 50 112 35 30 M45x3 68 160 7.716 GIR 50 UK GIL 50 UK - -

SI 50 C SIL 50 C 50 112 35 30 M52x3 68 160 9.000 - - SI 50 C SI L50 CSIC 60 C SILC 60 C 60 135 44 38 M52x3 70 175 12.125 GIR 60 UK GIL 60 UK - -SI 60 C SIL 60 C 60 135 44 38 M60x4 70 175 15.500 - - SI 60 C SI L60 CSIC 70 C SILC 70 C 70 160 49 42 M56x4 80 200 18.960 GIR 70 UK GIL 70 UK - -SI 70 C SIL 70 C 70 160 49 42 M72x4 80 200 23.000 - - SI 70 C SI L70 C

SIC 80 C SILC 80 C 80 180 55 47 M64x4 85 230 26.455 GIR 80 UK GIL80 UK - -SI 80 C SIL 80 C 80 180 55 47 M80x4 85 230 33.000 - - SI 80 C SI L80 C

NOTE:1.) Inner ring has a hard chrome sliding surface. Outer ring sliding surface has PTFE-fabric coating. Other brands may have a liner of different material.

ina52a

B

G

C

d

G1

ina53a

A

H34°

ina50a

G

d

B

C

G1

ina51a

A

H25°

ROD ENDS - INCH DIMENSIONS - STEEL ON STEEL WITH MALE THREADSConsolidated Dimensions Approx. Interchange

No. (Inch) Wgt.(lbs.)

Right Hand Left HandThread Thread d A B C G G1 H Aurora Heim Spherco

TRE-2 TREL-2 .1250 .4687 .2500 .1875 .1380 .5000 .9375 .020 - - HM-2 HML-2 TRE-2 TREL-2TRE-2A TREL-2A .1562 .5625 .2812 .2187 .1640 .6250 1.1250 .020 - - HM-2A HML-2A TRE-2A TREL-2ATRE-3 TREL-3 .1900 .6250 .3125 .2500 .1900 .7500 1.2500 .030 MM-3 MB-3 HM-3 HML-3 TRE-3 TREL-3TRE-4 TREL-4 .2500 .7500 .3750 .2812 .2500 1.0000 1.5625 .050 MM-4 MB-4 HM-4 HML-4 TRE-4 TREL-4TRE-5 TREL-5 .3125 .8750 .4375 .3437 .3125 1.2500 1.8750 .080 MM-5 MB-5 HM-5 HML-5 TRE-5 TREL-5

TRE-6 TREL-6 .3750 1.0000 .5000 .4062 .3750 1.2500 1.9375 .120 MM-6 MB-6 HM-6 HML-6 TRE-6 TREL-6TRE-7 TREL-7 .4375 1.1250 .5625 .4375 .4375 1.3750 2.1250 .170 MM-7 MB-7 HM-7 HML-7 TRE-7 TREL-7TRE-8 TREL-8 .5000 1.3125 .6250 .5000 .5000 1.5000 2.4375 .260 MM-8 MB-8 HM-8 HML-8 TRE-8 TREL-8TRE-10 TREL-10 .6250 1.5000 .7500 .5625 .6250 1.6250 2.6250 .410 MM-10 MB-10 HM-10 HML-10 TRE-10 TREL-10TRE-12 TREL-12 .7500 1.7500 .8750 .6875 .7500 1.7500 2.8750 .640 MM-12 MB-12 HM-12 HML-12 TRE-12 TREL-12

TRE-16 TREL-16 1.0000 2.7500 1.3750 1.0000 1.2500 2.1250 4.1250 2.250 MM-16 MB-16 HM-16 HML-16 TRE-16 TREL-16

ROD ENDS - INCH DIMENSIONS - STEEL ON STEEL WITH FEMALE THREADSTR-2 TRL-2 .1250 .4687 .2500 .1875 .1380 .3750 .8125 .020 - - HF-2 HFL-2 TR-2 TRL-2TR-2A TRL-2A .1562 .5625 .2812 .2187 .1640 .3750 .8750 .020 - - HF-2A HFL-2A TR-2A TRL-2ATR-3 TRL-3 .1900 .6250 .3125 .2500 .1900 .5625 1.0625 .030 MW-3 MG-3 HF-3 HFL-3 TR-3 TRL-3TR-4 TRL-4 .2500 .7500 .3750 .2812 .2500 .7500 1.3125 .050 MW-4 MG-4 HF-4 HFL-4 TR-4 TRL-4TR-5 TRL-5 .3125 .8750 .4375 .3437 .3135 .7500 1.3750 .080 MW-5 MG-5 HF-5 HFL-5 TR-5 TRL-5

TR-6 TRL-6 .3750 1.0000 .5000 .4062 .3750 .9375 1.6250 .120 MW-6 MG-6 HF-6 HFL-6 TR-6 TRL-6TR-7 TRL-7 .4375 1.1250 .5625 .4375 .4375 1.0625 1.8125 .170 MW-7 MG-7 HF-7 HFL-7 TR-7 TRL-7TR-8 TRL-8 .5000 1.3125 .6250 .5000 .5000 1.1875 2.1250 .260 MW-8 MG-8 HF-8 HFL-8 TR-8 TRL-8TR-10 TRL-10 .6250 1.5000 .7500 .5625 .6250 1.5000 2.5000 .410 MW-10 MG-10 HF-10 HFL-10 TR-10 TRL-10TR-12 TRL-12 .7500 1.7500 .8750 .6875 .7500 1.7500 2.8750 .640 MW-12 MG-12 HF-12 HFL-12 TR-12 TRL-12

TR-16 TRL-16 1.0000 2.7500 1.3750 1.0000 1.2500 2.1250 4.1250 2.250 MW-16 MG-16 HF-16 HFL-16 TR-16 TRL-16

NOTE:1.) Sizes TRE-2 & TRE-2A have Class 3-UNC threads. All other sizes have Class 3-UNF threads.2.) Add suffix "S" for relubrication feature. Example TRE-16 S

407

ROD ENDS - INCH DIMENSIONS - STEEL ON STEEL WITH MALE THREADS - HIGH CAPACITYConsolidated Dimensions Approx. Interchange

No. (Inch) Wgt.(lbs.)

Right Hand Left HandThread Thread d A B C G G1 H Aurora Heim Spherco

CFM-3 CFML-3 .1900 .6250 .3125 .2500 .1900 .7500 1.2500 .030 AM-3 AB-3 HM-3C HML-3C CFM-3 CFML-3CFM-4 CFML-4 .2500 .7500 .3750 .2812 .2500 1.0000 1.5625 .050 AM-4 AB-4 HM-4C HML-4C CFM-4 CFML-4CFM-5 CFML-5 .3125 .8750 .4375 .3437 .3125 1.2500 1.8750 .080 AM-5 AB-5 HM-5C HML-5C CFM-5 CFML-5CFM-6 CFML-6 .3750 1.0000 .5000 .4062 .3750 1.2500 1.9375 .110 AM-6 AB-6 HM-6C HML-6C CFM-6 CFML-6CFM-7 CFML-7 .4375 1.1250 .5625 .4375 .4375 1.3750 2.1250 .160 AM-7 AB-7 HM-7C HML-7C CFM-7 CFML-7

CFM-8 CFML-8 .5000 1.3125 .6250 .5000 .5000 1.5000 2.4375 .240 AM-8 AB-8 HM-8C HML-8C CFM-8 CFML-8CFM-10 CFML-10 .6250 1.5000 .7500 .5625 .6250 1.6250 2.6250 .400 AM-10 AB-10 HM-10C HML-10C CFM-10 CFML-10CFM-12 CFML-12 .7500 1.7500 .8750 .6875 .7500 1.7500 2.8750 .630 AM-12 AB-12 HM-12C HML-12C CFM-12 CFML-12

ROD ENDS - INCH DIMENSIONS - STEEL ON STEEL WITH FEMALE THREADS - HIGH CAPACITY

CFF-3 CFFL-3 .1900 .6250 .3125 .2500 .1900 .5000 1.0625 .030 AW-3 AG-3 HF-3C HFL-3C CFF-3 CFFL-3CFF-4 CFFL-4 .2500 .7500 .3750 .2812 .2500 .6250 1.3125 .050 AW-4 AG-4 HF-4C HFL-4C CFF-4 CFFL-4CFF-5 CFFL-5 .3125 .8750 .4375 .3437 .3125 .6250 1.3750 .080 AW-5 AG-5 HF-5C HFL-5C CFF-5 CFFL-5CFF-6 CFFL-6 .3750 1.0000 .5000 .4062 .3750 .6875 1.6250 .120 AW-6 AG-6 HF-6C HFL-6C CFF-6 CFFL-6CFF-7 CFFL-7 .4375 1.1250 .5625 .4375 .4375 .8125 1.8125 .170 AW-7 AG-7 HF-7C HFL-7C CFF-7 CFFL-7

CFF-8 CFFL-8 .5000 1.3125 .6250 .5000 .5000 .9375 2.1250 .260 AW-8 AG-8 HF-8C HFL-8C CFF-8 CFFL-8CFF-10 CFFL-10 .6250 1.5000 .7500 .5625 .6250 1.1875 2.5000 .410 AW-10 AG-10 HF-10C HFL-10C CFF-10 CFFL-10CFF-12 CFFL-12 .7500 1.7500 .8750 .6875 .7500 1.3750 2.8750 .640 AW-12 AG-12 HF-12C HFL-12C CFF-12 CFFL-12

G

d

B

C

G1

A

H

B

G

C

d

G1

A

H

408

Our Service Is…

Making our products readily available to you through a nationwide system of warehousesand sales offices. Consolidated is ready to fulfill your daily or long term requirements forbearings and related products. We offer the following:

Same Day Shipping Service - All orders that can be filled are shipped the same day they are received.

Emergency Shipment Service – Our staff is available to serve your requirements 24hours a day, throughout the year including holidays. Emergency phone numbers are listedin our current price schedule.

Overseas Air Service – If stock is available, Consolidated will arrange airfreightshipments from our overseas suppliers. Shipments are normally delivered within 10 days.

Direct Phone Order Service – Your calls reach our order desks directly. No voice mailand no delays. WATS numbers for all warehouse locations are listed on the back page ofour current price schedule.

Stock Availability Service – With our computerized inventory control system, we canprovide you with an immediate answer concerning stock availability from all of our nine (9)warehouse locations. For items not available, precise delivery dates can usually be given.

Technical Service – Our engineering staff can provide you with up-to-date technicalinformation regarding all types of bearing applications.

24-Hour Fax Service – Fax numbers for all warehouse locations are indicated on the backpage of our current price schedule.

Bearing Modification Service – Our Cedar Knolls facility is equipped to modify cylindricalroller and needle bearings to various internal clearances – C/3, C/4, W/23, C/5 or customclearances to meet your special requirements.

Documents

Oil Seals, Linear Recirclating Ball Bearings, Journal .... Oil Seals 375-408 Oil Seals, Linear Recirclating Ball Bearings, Journal Roller Assemblies, Spherical Plain Bearings, Rod