Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Αξιότιμη κα. Συμνιανάκη, Λάβαμε γνώση των αναρτημένων τεχνικών προδιαγραφών του νοσοκομείου σας και σας υποβάλλουμε παρακάτω τις προτάσεις μας σχετικά με το πλυντήριο χειρουργικών εργαλείων. Προτείνουμε να αφαιρεθεί η απαίτηση<< 3 σχάρες του φορέα φόρτωσης να είναι προαφαιρούμενες>> καθόσον η απαίτηση παραπέμπει σε συγκεκριμένη εταιρία. Επίσης προτείνουμε το ύψος του πλυντηρίου να μην υπερβαίνει τα 2 μέτρα, καθόσον μεγαλύτερο ύψος δεν είναι εργονομικό. Προτείνουμε να αντικατασταθεί η απαίτηση όσον αφορά το άνοιγμα των θυρών ως εξής: Οι θύρες να ανοίγουν είτε συρόμενες κατακόρυφα είτε να ανοίγουν μέχρι την πλήρη οριζοντίωσή τους ώστε να χρησιμεύουν και ως πλατφόρμες φόρτωσης των υλικών. Προτείνουμε να αφαιρεθεί η παράλογη απαίτηση το γρήγορο πρόγραμμα να μην υπερβαίνει τα 40 λεπτά. Αυτή η επίδοση μπορεί να επιτευχθεί μόνο σε εργαστηριακές συνθήκες, με μικρό φορτίο, παροχή ζεστού νερού στο πλυντήριο και με μικρές απαιτήσεις στεγνώματος των υλικών. Η απαιτούμενη αντλία αποχέτευσης είναι περιττή σε περίπτωση συνήθους εγκατάστασης. Μόνο στην περίπτωση που η αναμονή της αποχέτευσης είναι στο τοίχο και όχι στο δάπεδο, απαιτείται αντλία αποχέτευσης. Αντίθετα είναι απολύτως απαραίτητος ο συμπυκνωτής υδρατμών, ώστε να μην επιβαρύνεται με υγρασία και οσμές ο χώρος σε καθημερινή βάση. Τέλος η τελευταία παράγραφος που αφορά την παροχή των απορρυπαντικών και απολυμαντικών, είναι άσχετη με τις προδιαγραφές ενός πλυντηρίου και προτείνουμε να αφαιρεθεί. Ελπίζουμε οι προτάσεις μας να γίνουν αποδεκτές και παραμένουμε στη διάθεσή σας για κάθε συμπληρωματική πληροφορία ή διευκρίνιση. Με εκτίμηση, Ευριπίδης Σιδερίδης ( MSc Φυσικός) Υπεύθυνος Πωλήσεων Ιατρική Μέριμνα & Υγεία ΑΕ. Ιατρικά Μηχανήματα & Εξοπλισμός Νοσοκομείων Λ.Ηρακλείου 424 14122 Νέο Ηράκλειο, Αττικής, Ελλάδα Τηλ.: 210 2856586, Φαξ : 210 2853709 Κινητό : 6978 119372
Αξιότιμη κα. Συμνιανάκη, Λάβαμε γνώση των αναρτημένων τεχνικών προδιαγραφών του νοσοκομείου σας και σας υποβάλλουμε παρακάτω τις προτάσεις μας σχετικά με τον κλίβανο ατμού. Κατ’ αρχή παρακαλούμε να αλλαχθεί η απαίτηση όσον αφορά την χωρητικότητα του θαλάμου από 10 αποστειρωτικές μονάδες σε 12 αποστειρωτικές μονάδες ή σε 8 αποστειρωτικές μονάδες καθότι η απαίτηση για 10 αποστειρωτικές μονάδες παραπέμπει σε συγκεκριμένη εταιρία, η οποία αποκτά οικονομικό πλεονέκτημα με την υπάρχουσα απαίτηση. Επιπλέον ζητούμε να αλλαχθεί η απαίτηση οι θύρες να καλύπτονται από μονωτικό υλικό ως εσφαλμένη. Οι θύρες περιέχουν μονωτικό υλικό, το πάχος του οποίου πρέπει να είναι 80 χιλιοστά περίπου. Η απαίτηση η θερμοκρασία επαφής του θαλάμου στο χώρο συντήρησης να είναι η μικρότερη δυνατή (<50°C), ώστε να διευκολύνονται οι εργασίες επισκευών και συντήρησης, είναι ασαφής (πότε: όταν λειτουργεί ο κλίβανος ή δύο ώρες μετά;) και μικρής σημασίας και προτείνουμε να αφαιρεθεί. Μεγάλης σημασίας για το νοσοκομείο είναι ο τρόπος προώθησης των φλαντζών στεγανοποίησης του θαλάμου. Προτείνουμε η προώθησή τους να γίνεται με πεπιεσμένο αέρα και όχι με υπέρθερμο ατμό, ο οποίος τις καταπονεί καθημερινά και υποχρεώνει το νοσοκομείο να τις αντικαθιστά πολύ συχνά (περίπου κάθε 3-4 μήνες). Συνέπειες: Έξοδα και χρόνος down-time. Η προτεινόμενη χωρητικότητα υπερβαίνει τα 850 λίτρα, η ωφέλιμη προτείνουμε να είναι 12 STU και οι εξωτερικές διαστάσεις (Π ΧΒ ΧΥ): 1000 Χ 2000 Χ 2400 χιλιοστά περίπου. Δεδομένου ότι ο ατμός του δικτύου στα περισσότερα νοσοκομεία είναι κακής ποιότητας προτείνουμε η λειτουργία του κλιβάνου να γίνεται μέσω ενσωματωμένης ατμογεννήτριας 60 Kw τουλάχιστον. Επιπλέον προτείνουμε να προστεθεί στις προδιαγραφές η απαίτηση ο κλίβανος να διαθέτει πρόγραμμα προ ρυθμισμένης προθέρμανσης από την προηγούμενη ημέρα καθώς και ενσωματωμένη διάταξη Bowie&Dick test. Κατ’ αυτό τον τρόπο το προσωπικό κερδίζει μία ώρα εργασίας κάθε πρωί και το νοσοκομείο εξοικονομεί εργατοώρες και το κόστος των αναλωσίμων πακέτων B&D. Ελπίζουμε οι προτάσεις μας να γίνουν αποδεκτές και παραμένουμε στη διάθεσή σας για κάθε συμπληρωματική πληροφορία ή διευκρίνιση. Με εκτίμηση, Ευριπίδης Σιδερίδης ( MSc Φυσικός) Υπεύθυνος Πωλήσεων Ιατρική Μέριμνα & Υγεία ΑΕ. Ιατρικά Μηχανήματα & Εξοπλισμός Νοσοκομείων Λ.Ηρακλείου 424 14122 Νέο Ηράκλειο, Αττικής, Ελλάδα Τηλ.: 210 2856586, Φαξ : 210 2853709 Κινητό : 6978 119372
Αξιότιμη κα. Συμνιανάκη, Λάβαμε γνώση των αναρτημένων τεχνικών προδιαγραφών του νοσοκομείου σας και σας υποβάλλουμε παρακάτω τις προτάσεις μας σχετικά με τον κλίβανο πλάσματος. §2 Να λειτουργεί με ρεύμα πόλης με σταθεροποιημένη τάση και να μην παρουσιάζει προβλήματα από διακυμάνσεις της τάσης του δικτύου. Προτείνουμε να τροποποιηθεί ως εξής: Να λειτουργεί με ρεύμα δικτύου πόλης 220V/50Hz και να συνοδεύεται από κατάλληλο σταθεροποιητή τάσης. §3 Να είναι δύο θυρών και να έχει ενδεικτικές εξωτερικές διαστάσεις 850χ900χ1900mm (ΠΧΒΧΥ). Ο θάλαμος να είναι ορθογώνιος παραλληλόγραμμος, χωρητικότητας τουλάχιστον 100λτ. Προτείνουμε να τροποποιηθεί ως εξής: Να είναι μιάς θύρας και να έχει ενδεικτικές εξωτερικές διαστάσεις (ΠΧΒΧΥ) 850Χ1000Χ1700mm περίπου. Ο θάλαμος να είναι ορθογώνιος παραλληλόγραμμος με ωφέλιμη χωρητικότητα 120 λτ. και το βάθος του να είναι μεγαλύτερο των 75 εκατοστών για να χωρούν τα μεγάλου μήκους εργαλεία. §5 Να καταστρέφει όλο το φάσμα των παθογόνων μικροοργανισμών και βακτηριακών σπόρων και να έχει αποδεδειγμένη αποτελεσματικότητα έναντι λοιμογόνων μορίων πρωτεΐνης (prions) με τη μέθοδο τεχνολογίας συμπυκνώματος Η2Ο2. Προτείνουμε να τροποποιηθεί ως εξής: Να καταστρέφει όλο το φάσμα των παθογόνων μικροοργανισμών και βακτηριακών σπόρων με την τεχνολογία πλάσματος Η2Ο2. §6 Η χρησιμοποιούμενη τεχνολογία συμπυκνώματος Η2Ο2 να εξασφαλίζει ότι τα μόρια του Η2Ο2 εισχωρούν σε βάθος για την αποτελεσματική αποστείρωση εργαλείων που διαθέτουν εσωτερικούς αυλούς. Προτείνουμε να τροποποιηθεί ως εξής: Η χρησιμοποιούμενη τεχνολογία πλάσματος Η2Ο2 να εξασφαλίζει ότι τα μόρια του Η2Ο2 εισχωρούν σε βάθος για την αποστείρωση (δεν υπάρχει μη αποτελεσματική αποστείρωση) αυλοφόρων εργαλείων. §7 Να αναφερθεί η τεχνολογία που χρησιμοποιείται για την επιβεβαίωση της ομαλής διάχυσης του Η2Ο2 στο θάλαμο αποστείρωσης. Προτείνουμε να διαγραφεί η φράση ως φωτογραφική. §8 Η συσκευασία του αναλώσιμου αποστειρωτικού μέσου Η2Ο2 να παρέχει μέγιστη ασφάλεια στους χρήστες, αποκλείοντας την απευθείας επαφή με το υγρό Η2Ο2. Να μην απαιτούνται πρόσθετες ενέργειες για την απόρριψη της χρησιμοποιημένης συσκευασίας προσφέροντας μέγιστη ασφάλεια στους χειριστές. Προτείνουμε να τροποποιηθεί ως εξής: Η συσκευασία του αναλώσιμου αποστειρωτικού μέσου Η2Ο2 να παρέχει μέγιστη ασφάλεια στους χρήστες. Επιπλέον η περιεκτικότητα του διαλύματος του Η2Ο2 να μην υπερβαίνει το 50% ούτως ώστε αυτό να μην είναι διαβρωτικό για τα ευαίσθητα είδη και τα εύκαμπτα εργαλεία. §18 Να διαθέτει καταγραφικό όπου θα αναγράφονται όλες οι παράμετροι του κύκλου αποστείρωσης για κάθε στάδιο καθώς και η χρονική διάρκεια του κύκλου αποστείρωσης, οι συναγερμοί και λοιπές πληροφορίες για το αποστειρωτικό μέσο. Προτείνουμε να τροποποιηθεί ως εξής: Να διαθέτει καταγραφικό όπου θα αναγράφεται η πίεση του θαλάμου σε κάθε στάδιο του αποστειρωτικού κύκλου, η
χρονική διάρκεια του κύκλου, οι συναγερμοί καθώς και πληροφόρηση για την εναπομείνασα ποσότητα αποστειρωτικού μέσου. Η ΠΑΡΑΠΑΝΩ ΔΙΑΤΎΠΩΣΗ ΕΙΝΑΙ ΣΑΦΕΣΤΕΡΗ ΚΑΙ ΠΙΟ ΟΥΣΙΑΣΤΙΚΗ. §20 Προτείνουμε να διαγραφεί η φράση «Οι ενδείξεις να είναι ευδιάκριτες από απόσταση» ως ασαφής. Προτείνουμε να προστεθεί η απαίτηση: Να υπάρχει η δυνατότητα μεταφοράς δεδομένων σε εξωτερικό μέσο αποθήκευσης. Για τον σκοπό αυτό να διαθέτει δίσκο SSD καθώς και δύο θύρες USB. Επιπλέον προτείνουμε να προστεθεί η απαίτηση να προσφερθούν με ξεχωριστές τιμές τα αναλώσιμα αποστειρωτικά μέσα, οι βιολογικοί δείκτες και οι χημικοί δείκτες. Ελπίζουμε οι προτάσεις μας να γίνουν αποδεκτές και παραμένουμε στη διάθεσή σας για κάθε συμπληρωματική πληροφορία ή διευκρίνηση. Με εκτίμηση, Ευριπίδης Σιδερίδης ( MSc Φυσικός) Υπεύθυνος Πωλήσεων Ιατρική Μέριμνα & Υγεία ΑΕ. Ιατρικά Μηχανήματα & Εξοπλισμός Νοσοκομείων Λ.Ηρακλείου 424 14122 Νέο Ηράκλειο, Αττικής, Ελλάδα Τηλ.: 210 2856586, Φαξ : 210 2853709 Κινητό : 6978 119372
WD 200: Single-chamber washer-disinfector in compliance with EN ISO 15883
MP
203
8.02
.120
2E
Highest performance on smallest footprint
Making reliably reprocessed instruments available – as fast and economically as possible.
The challenge
CSSDs and TSSUs are challenged with achieving higher
productivity levels than ever before. As a result,
customers need a washer-disinfector that can process
high volumes of medical devices, utensils and delicate
instruments quickly, efficiently and safely. Customers
also need a system that requires small footprint and is
simple to operate and maintain.
High quality
Our customers’ requirements as well as current guidelines
are our benchmark for safety, quality, efficiency and
ecology. This is once again highlighted by the new product
generation of the WD 200. Exclusive use of high-quality
materials combined with careful workmanship make our
products durable and robust. The best proof of this is the
scratchresistant and extremely tough glass front of our
machines and the smart design of the wash chamber with
a minimum of welding joints. The device comply with
international as well as country-specific directives, such as
for example the most important standard EN ISO 15883-1
and 15883-2.
The demands placed on instrument reprocessing within Central Sterile Supplies Departments (CSSD) and in Theater Sterile
Supply Units (TSSU) have never been more stringent than now. With a vast diversity of material and equipment to be
cleaned, disinfected and dried, this volume is increasing all the time. CSSDs and TSSUs are obliged to make reliably sterilized
articles available at the required time and place for any agreed purpose in the hospital as economically as possible.
2
Belimed WD 200 – 12 DIn tray washer-disinfector with manual hinged doorsDeveloped to comply with the latest EN ISO 15883 directive, the WD 200 washer-
disinfector ensures high capacity, smallest footprint and low media consumption.
Making reliably reprocessed instruments available – as fast and economically as possible.
Highest performance, smallest footprint
The WD 200 washer-disinfector was developed for
professional use in hospitals and small clinics. The unique
capacity of 12 DIN trays, the small foot print – only 68 cm
wide – , low media consumption and the high quality of
the washing chamber and components are distinguishing
features of the device. Developed in compliance with EN
ISO 15883, the machine is simple to operate and ensures
fast and reliable reprocessing of medical devices.
ECO-features for low media consumption and high
productivity
With the unique Belimed ECO-feature “Dynamic Filling”
water, detergents and energy can be saved up to 20 %.
The optional heat recovery from the exhaust-air can be
used to reduce energy and media consumption by
an additional 20 %. The unique Belimed ECO generation of
water-saving and pressure optimized instrument wash
racks need approx.10 % less water as common wash rack
designs.
Dimensions
Outer dimensions H × W × D (mm) 1840 × 680 × 710
Chamber dimensions H × W × D (mm) 625 × 575 × 617
Chamber volume (l) 225
Cycle capacity
Surgical instruments (DIN trays 485 x 260 mm) up to 12
MIS instruments (connections, jets / DIN trays) 48 / 4
Anaesthesia materials
15 × breathing hoses max.1.5 m, 3 breathing
bags, 5 masks, 5 catheters, 5 tubes
Sterile goods containers H × W × D (210 × 300 × 600 mm)
3 × DIN Container3 × lids
OR shoes (pieces) up to 40
Baby bottles including caps (pieces) 84
*Enable chamer volume
*
3
WD 200 – High user convenience in each detail
High-quality materials, intelligent manufacturing – the WD 200 meets highest requirements in terms of
design and workmanship. Sturdy double-glazed hinged doors are a standard feature, as well as an
illuminated, excellently worked AISI 316L stainless steel chamber.
Chamber light
Easy loading and unloading due to guiding
notches integrated in glass door; robust door
construction: up to 80 kg loading weight possible
Innovative 6-level rack with 12 DIN capacity
For cleaning removable fi lter
Docking coupler: high cleaning action
The machine and rack connect to form one whole
system. A hydraulically activated docking device connects
the washer and rack providing a water tight seal
resulting in an improved cleaning action in comparison
to many other conventional docking systems.
Self-cleaning: thorough disinfection of the
entire system
To meet hygiene standards, the entire system including
wash chamber and RO water preheating system, is
cleaned and disinfected automatically during the defi ned
site operational procedure downtimes. Therefore, the
washer-disinfector is in a hygienic condition for operation
at all times.
Innovative 6-level rack with 12 DIN capacity
Complete drainage: automatically and reliably
after each program phase
The design and construction of Belimed chambers and its
associated pipework eliminates the risk of carry-over
between each phase of the cycle. The entire system is
drained completely after each process step.
4
WD 200 – High user convenience in each detail
Ergonomic operating panel with integrated printer
Storage of 2 × 10 l detergents
Hygiene of the highest standard
The welding seams of the chamber were reduced to a
minimum. The chamber fl oor features a 5 percent incline,
allowing the water to drain off optimally after the cleaning
process. This signifi cantly reduces the risk of cross-contam-
ination and carry-over of rinsing media.
Increased capacity thanks to an intelligent
rack concept
The compact construction design is not the only new
feature of the WD 200. Also a new instrument rack
concept was developed. The rack washing system consists
of just one component, a distribution pipe located at the
center. The wash arms emanate from the distribution pipe
without additional mechanical mounting. This arrange-
ment contributes to reducing water consumption and
optimizing cleaning performance. At the same time, the
rack capacity is up to 12 DIN instrument trays.
5
WD 200 – Small footprint saves spaceWith a width of only 68 cm the Belimed washer-disinfector range of machines achieves one of the
smallest footprints of any unit on the market. No lateral maintenance room needed.
That’s true greatness. Often concentrated in the smallest of spaces.
Smart resource management gets you further. And is mighty impressive.
Belimed WD 200
• Capacity: 36 DIN instrument trays per cycle
• 20 % more capacity per cycle
• Up to 50 % less required space
• Easy maintenance from the front only needed
Comparable single-chamber washer-disinfectors
• Capacity: 30 DIN instrument trays per cycle
• Maintenance access from the side needed
6
Effi cient and economical operationThe Belimed commitment to high economic effi ciency includes a focus on cost savings and
maximizing the investment in your equipment. Our systems feature economical use of resources like
water, detergents and energy.
WD 200 – Small footprint saves space
That’s true greatness. Often concentrated in the smallest of spaces.
Smart resource management gets you further. And is mighty impressive.
Low media consumption and high productivity
“Dynamic Filling” is a unique economic feature. Water
volume is automatically matched to the rack and the
material to be processed. This optimizes utilization
of water, detergents and energy resulting in savings of
up to 20 % in utility and additive consumption per cycle.
Energy saving by heat recovery
As an optional feature, heat recovery from the exhaust-air
can be used to pre-heat RO water in a separate tank with
a counter-fl ow heat exchanger – positioned above the
wash chamber. This reduces energy and media consumpti-
on by an additional 20 %, increases productivity of up to
25 % and avoids the condensation in the exhaust-air pipe
and thus protects against microbial contamination and
corrosion.
6-level ECO instrument rack for 12 DIN traysWD 200 pre-heating RO water tank
1 Exhaust-air hot2 Exhaust-air fl ap3 Condensate drain4 Condenser with heat recovery system5 Exhaust-air cold6 RO water cold7 RO water preheated8 RO water tank with heating elements9 RO water hot
Unique ECO instrument racks with additional
capacity and less media consumption
The new and unique generation of instrument wash racks
is based upon the concept of a water distribution unit
made out of one piece only. As a consequence this leads to
water savings and pressure optimized performances and
exceptional cleaning results. This new design saves
approx.10 % less water as common wash rack design.With
a maximum capacity of 12 DIN trays per cycle the WD 200
is also able to process 20 % instruments more per cycle as
any other washer-disinfector in its class.
2
13
4
8
9
5
6
7
7
Improved work quality due to easy operation
A shining example of intelligence and friendliness. Just like our technology.
CSSDs manage high workloads with little staff. Belimed systems help the staff and relieve the workload
by focusing on ease of operation and maximum process reliability.
Comfortable and transparent user guidance
Clear menu navigation and the illuminated color display
ensure even greater user comfort. Activation of the
respective keys with a simple touch is confi rmed by an
acoustic signal.
Automatic program selection and effi cient
reprocessing
Another advantage is the automatic program selection
option. This allows programs to be automatically or
manually selected. The control identifi es the relevant rack
using special sensors and automatically begins the
cleaning process, based on rack identifi cation.
Correct and fast information
Important process data, such as remaining duration,
loading or removal readiness or error messages are
displayed via our patented process status display that is
visible from afar. The employee can see the relevant
information clearly at a glance, even from a distance. The
display works in the manner of an analogue clock by
means of LED technology.
Ergonomic and functional
Convenient, cleverly designed and ergonomically
expedient – loading and unloading the WD 200 is easy as
can be. Thus, the racks can be loaded at a height of 87
centimeters while being secured by a hinged door which
can at the same time serve as loading and unloading table.
This is not only most convenient, but also saves space. The
work is rendered especially safe and easy thanks to a
transport cart which can be docked directly onto the
hinged door.
Easy to clean wash arms
The WD 200 as well as the corresponding wash racks are
equipped with easy-to-clean washarms with removable
caps. This saves precious time and makes life easier for the
personnel.
Great user comfort due to easy operation Easy to clean: Belimed wash arm with removable end caps8
A shining example of intelligence and friendliness. Just like our technology.
Monitoring and documentation made easyWD 200 is offering several ways and levels of monitoring and documentation of the process cycles.
A0 value
Belimed’s programmable microprocessor control provides
the A0 value during each cycle. The disinfection phase is
only completed when the appropriate A0 value is reached.
This prevents unnecessary resource consumption and
saves time. The A0 value is a measure of the effectiveness
of thermal disinfection as a function of temperature and
time. Mathematically, this is described with the integral of
temperature over time. The standard states variable
A0 in seconds.
Greater safety and reliability due to
independent process data monitoring
Optional monitoring sensors ensure maximum process
reliability. Relevant performance parameters are
monitored continuously:
• Number and type of process step
• Pump pressures
• Temperature-time profiles of water and air
• Quantity and volume of detergents used
• Conductivity of the final rinse water
Exceptional Support Services –
Improve system uptime with remote diagnostics
To maximize system uptimes Belimed offers its customers
Belimed Remote Services, an innovative approach to
monitoring sterile processing equipment. Unexpected
downtime is minimized. When problems arise, the service
technician can analyse the error message via the remote
connection, modify programmes if necessary or initiate
further problem solving steps. Should an on-site service
call be unavoidable, the service technician already has
valuable information about your system. All current
Belimed products can be equipped with a remote
diagnostics modem. Many older models can also be
refitted with this modem.
Belimed Infection Control Software ICS 8535
All process information, the measured values and program
parameters are automatically downloaded to either a
stand-alone PC or to a clients network. The data may be
retrieved at any time and used to provide documentation
for quality assurance or product release purposes. At any
time Belimed‘s Infection Control Software ICS 8535
may be extended for use with other decontamination
equipment such as cart washers or sterilizers. Due to using
an SQL platform, the ICS 8535 allows either machine’s
process data or independent monitoring data to be easily
exported, to ensure full integration and connectivity with
any client’s electronic tracking and traceability system.
The Belimed Management and Tracking Software allows each item to be uniquely identified and traced throughout the entire cycle.
9
High fl exibility, extensive range of accessoriesBelimed offers the right accessory solution within its comprehensive range of accessories whether it be for surgical instruments, minimal invasive
equipment, anesthetics tubing, operating room shoes, containers and baby bottles.
ECO instrument racks • Art. no. 870 126 3-Ievel instrument rack, 6 DIN trays• Art. no. 870 128 4-level instrument rack, 8 DIN trays• Art. no. 870 130 5-level instrument rack, 10 DIN trays• Art. no. 870 132 6-level instrument rack, 12 DIN trays
An rack, Art. no. 870 115For loading with • 10 breathing hoses D 21 mm max. 1.5 m• 5 breathing hoses D 11.2 mm max. 1.5 m• 3 breathing bags• Jet-bars removable and equipped with cleaning,
openings• 5 catheters and 5 tubes with holders, 5 masks• Jet bar for 4 connections; can be replaced and
changed according to individual needs• 1 small item box included
MIS instrument rack, Art. no. 870 118• 48 different connections• Max. instrument length 545 mm• 4 DIN trays• Up to 4 hose towers
Container rackArt. no. 870 120• 3 DIN container
H × W × D = 210 × 600 × 300 mm• 3 lids
Inserts for OR shoes• For the usage of 1-level and 2-level basis rack• Art. no. 870 137 for 10 OR shoes up to size 44*• Art. no. 870 138 for 15 OR shoes up to size 48**
*Capacity per level: 2 × 10 OR shoes**upper level only
Insert for baby bottles • Art. no. 773 843 for 21 bottles, 250 ml• Art. no. 771 287 for 21 bottles, 125 ml• Art. no. 817 302 for 21 bottles, 90 ml
Transport cart, art. no. 870 134• For manual docking at the WD 200 hinged glass
door• Space for one additional rack in the lower level of
the trolley
Rack for utensils• Art. no. 870 122 Basis rack 1-level• Art. no. 870 124 Basis rack 2-level
10
High flexibility, extensive range of accessoriesTechnical data WD 200
Type tested according to EN ISO 15883-1 and 15883-2 ■MPG certificat CE 0044, VDE, EMV, DVGW, SVGW etc. ■Double door pass-through model with door interlock (Manual hinged doors with glass window) ■Storage space for 2 × 10 l detergent cans ■Wash chamber made of high quality stainless steel, AISI 316L ■Front covers made of stainless steel AISI 304, grinded 4N ■Base panels ■Wash pump capacity 625 l/min
Electrically heated wash chamber; heating power 18 kW
Tank heating with steam heat exchanger O
Peak load cut-off for electrical heater ■Validation port for external measuring devices and sample drawing tap ■Electrically heated drying unit 3.5 kW
Heavy duty drying ventilators with HEPA filter H13 (capacity) 324 m3/h
Sterile filter monitoring by pressure measurement O
Exhaust-air flap to prevent thermal energy loss ■High capacity valves for fast filling with temperature control during filling for hot, cold and DI water (40 l/min) ■High-capacity drain valve (5 l/s) ■“Dynamic Filling” system to reduce media consumption ■Pump pressure monitoring (wash dynamic) ■Foam control ■12 programs freely programmable via code, program library ■A0 value control function and controller ■Temperature monitoring during complete cycle ■Wash chamber illumination ■Patented status display; remaining cycle time, loading or removal readiness and error messages are displayed well visible from afar ■Acoustic signal at program end ■User interface with touch response, with 2 line VFD display at loading side ■2 line LCD display at unloading side (H × W = 25 × 120 mm) ■Automatic maintenance reminder ■Interfaces: RS 232 for printer, RS 485 for PC cycle documentation, RS 232 for barcode reader ■Dosing units for detergents (standard/optional); max. 4 2/2
Flow control for dosing units (standard/optional); max. 4 2/2
Recognition of coded racks O
Empty level indicator O
Exhaust air condenser operated either by fresh water or by cooling water loop O
Electrically heated RO water tank 9 kW O
Heat recovering system by condenser and RO water pre-heating O
Barcode reader for registering wash goods O
Built-in cycle printer at loading or unloading side O
Independent process documentation (IPD) to monitor process data by independent sensors (water temperature, pump pressure and detergent dosing, conductivity control for final rinsing phase)
O
Conductivity measurement O
Modem connection for remote access and diagnosis O
Drain pump O
Floor tube made of stainless steel with drain and leakage sensor O
Side panels (left/right) project specific additional panels made of stainless steel AISI 304, grinded 4N O
■ = standard 0 = optional
Subject to modification
Technical Data
11
MP
203
8.02
.120
2E
AUSTRIABelimed GmbHGrüne Lagune 18350 FehringTel. +43 3155 40 699 0Fax +43 3155 40 699 [email protected]
BELGIUMNV Belimed SARue de Clairvaux 81348 Louvain-La-NeuveTel. +32 10 42 02 40Fax +32 10 42 02 [email protected]
CHInABelimed Medical Equipment (Shanghai) Co., Ltd CaiLun Road 780, 5th floor, Room HZhangJiang Hi-Tech Park 201203 Pudong, Shanghai Tel. +86 21 513 709 98 Fax +86 21 513 709 96 [email protected]
FRAnCEBelimed SASParc GVIO330 Allée des Hêtres, Hall E69760 LimonestTel. +33 4 37 41 63 03Fax +33 4 37 41 63 [email protected]
Branch OfficeBelimed SAS ZAC Saumaty Séon19 rue Gaston Castel13016 Marseille Tel. +33 4 96 15 22 10 Fax +33 4 96 15 22 19 [email protected]
Branch OfficeBelimed SASParc Espale 1, av. Pierre Pflimlin68390 SausheimTel. +33 3 89 63 65 40Fax +33 3 89 63 65 [email protected]
GERMAnYBelimed Deutschland GmbHEdisonstrasse 7a84453 Mühldorf am InnTel. +49 8631 9896 0Fax +49 8631 9896 [email protected]
Branch Office West Belimed Deutschland GmbHEmil-Hoffmann-Strasse 2750996 KölnTel. +49 2236 9642 0Fax +49 2236 9642 [email protected]
HUnGARYBelimed Infection Control Kft.Gyergyó utca 5.1026 BudapestTel. +36 1 318 86 97 Fax +36 1 318 87 [email protected]
nETHERLAnDSBelimed B.V.Vlambloem 653068 JG RotterdamTel. +31 10 286 17 50Fax +31 10 456 56 [email protected]
SLOVEnIABelimed d.o.o.Kosovelova cesta 21290 GrosupljeTel. +386 1 7866 010Fax +386 1 7866 [email protected]
SWITZERLAnDBelimed Sauter AGZelgstrasse 88583 SulgenTel. 0848 55 88 11Fax +41 71 644 86 [email protected]
UnITED KInGDOMBelimed LimitedUnit 4 Newbuildings PlaceDragons Green Road ShipleyWest Sussex, RH13 8GQTel. +44 1403 738 811Fax +44 1403 730 [email protected]
USABelimed, Inc.2284 Clements Ferry Road Charleston, SC 29492 Tel. +1 843 216 7424 Fax +1 843 216 [email protected]
OTHER COUnTRIESMedical/Medical LabBelimed AGDorfstrasse 46275 BallwilSWITZERLANDTel. +41 41 449 78 88Fax +41 41 449 78 [email protected]
OTHER COUnTRIESPharma/Pharma LabBelimed Sauter AGZelgstrasse 88583 SulgenSWITZERLANDTel. +41 71 644 85 00Fax +41 71 644 86 [email protected]
www.belimed.com
MST-V steam sterilizer with vertical sliding door – for dependable and qualifi ed sterilization of medical devices
Sterilization today: safe, space-saving and ergonomic
The focus is on the human being – greater safety thanks to qualifi ed reprocessing
Central Sterile Supplies Departments (CSSD) are an integral department in most clinic and hospital operations. The demands
placed on instrument processing within these units have never been more stringent than now.
It is essential to combine a high level of working effi ciency
with optimum reprocessing of medical devices. This is a
complex task for which there are often too few staff
available, especially at peak times.
Innovation and experience
As a leading supplier of decontamination systems and
solutions in the area of infection control, Belimed has over
40 years of experience developing and manufacturing
innovative cleaning, disinfection and sterilization systems
for the medical, pharmaceutical and laboratory sectors. The
focus is on safety and the well-being of patients and staff.
Numerous requirements – one contact
In addition to being high-quality decontamination systems
provider Belimed also supplies a broad range of additional
solutions. These include in-house services, extending from
planning and project management through after-sales
support with validation and maintenance. Belimed works
together with their clients to develop solutions to offer
a system providing them effi cient workfl ow and maximum
productivity.
2
The most compact sterilizer in its class – the new MST-V The MST-V is ideal for ensuring reliable and qualifi ed sterilization of medical devices in the CSSD.
The sterilizer is effi cient, compact, economical and reliable, setting standards in terms of
innovation, versatility and minimal space requirements.
Compact, ergonomic and user-friendly –the new MST-V steam sterilizer, developed and
manufactured in Switzerland
3
Improved work quality – the result of Belimed’s new product design
The new MST-V sterilizer was developed in accordance with the latest standards. The look and function are entirely based on
the requirements of the operating staff. For example, in addition to an attractive design and clear, easy-to-use interface it
provides maximum user convenience and reliable operator control.
Ergonomics at the workplace
The MST-V sterilizer combines excellent ergonomics with
attractive design and easy operation. The loading height of
78 cm is the lowest in this class. Additionally, the touch-
sensitive control panel is located at an ergonomically ideal
height.
Accurate, real-time information
Clear, easy-to-see information is imperative for a high
degree of user convenience and maximum reliability in
operator safety. That is why our systems display important
process data such as the time remaining, loading or
removal readiness and error messages via the process
status display. The employee can easily see the relevant
information at a glance, from across the room.
Space-saving and ergonomic –the MST-V steam sterilizer boasts a vertically sliding door, an external width of only 99 cm and a loading height of only 78 cm.
4
A state-of-the-art PLC facilitates access to sterilizer data
Standardized operator control
All new Belimed systems, whether sterilizers or
washer-disinfectors, offer a consistent operating interface,
thus reducing training requirements and keeping error
sources to a minimum. Audible feedback with each key
touch provides confi rmation to the user. Clear menu
navigation and the illuminated color display ensure even
greater user convenience. The display is clearly legible even
when viewed from the side at an extreme angle.
Optimum hygiene thanks to easy cleaning
The seamless surface made of solid stainless steel in
conjunction with glass and top-quality HI-MACS®
material meets the highest standards in terms of hygiene.
Even the control panel is located behind a glass plate so it
is completely protected from soiling, making it quick and
easy to clean.
Control panel on side 1 (loading side) Control panel on side 2 of two-door systems
Owing to the unique process status display the time remaining, ready-to-load
signal, ready-to-unload signal and error messages are clearly visible from up close
or at a distance.
5
The precision sealing frame made of solid stainless steel ensures maximum operating reliability for the door system.
Quiet, water-saving vacuum system
Innovative function, economic operation
During development of the MST-V sterilizer the focus was on protecting patients and staff while maximizing cost effi ciency.
The new generation of machines is extremely economical with the use of resources, such as water. Optimized standard
programs reduce process times by up to 10% compared to systems of comparable capacity.
Maximum performance within a very small space
High productivity is combined with minimal space
requirement, taking full advantage of the typically limited
space available in the CSSD. Owing to its capacity of 4 to
12 sterile units (SU), its light weight and a width of only
99 cm the MST-V sterilizer is the most effi cient and most
compact sterilizer in its class. Delivery and installation of
the machines are easy and uncomplicated.
Six times longer service life of door seal
The solid silicone door seal, with its milled solid stainless
steel frame made of grade 1.4404 chrome-nickel steel, has
a much longer service life than that of comparable
machines. Maintenance is fast and easy – the seal can be
quickly and easily pushed out of the frame at the touch of
a button and then is drawn back into the sealing frame,
with a second push of a button, by the vacuum system.
Much less water consumption than in
conventional systems
The new MST-V sterilizer achieves maximum resource use
economy through inventive engineering design. Our
innovative technology reduces water consumption and
allows a higher inlet temperature for the cooling water
resulting in energy savings. Additional reduction of
consumption is achieved by the water-saving system used
by the integrated, extremely quiet liquid ring vacuum
pump.
6
An extract from our extensive range of accessories:
• Automatic loading and unloading systems• Holding/queuing sections• Return locks • Return gates• Transport logistics to suit the customer‘s requirements
Automated processes, fast and easy maintenanceWith a wide range of different accessories the level of automation of the MST-V sterilizer can be
adapted to suit your specifi c requirements and thus ensure optimized process cycles. The large front
access to the internal parts and components also ensures fast system maintenance.
Greater effi ciency due to automation
Loading and unloading modules, along with queuing
sections, allow continuous operation of the sterilizers. In
addition, you can take advantage of fl exible extension
options, such as return locks and return gates.
Ergonomically designed transfer trolleys
Belimed transfer trolleys are simple and reliable to use.
With the adjustable-height model the working height is
easily selectable and can be set to the ideal ergonomic
level of the user. The trolleys are completely manufactured
from top-quality stainless steel which makes them sturdy,
damage resistant and very durable.
Fast and easy maintenance
The MST-V sterilizer provides easy, direct access to the
components and parts through front panels which open
completely. The electrical control cabinet, behind the front
panel, can then be swung to the side for complete access.
Servicing and maintenance work can thus be performed
quickly and effi ciently. No side access is required. That
saves you time, space and money.
Remote diagnostics
Our service staff have direct access to the machine control
system over the Internet and can thus provide fast
technical support due to the integrated Web server in each
machine.
MST-V equipment compartment – clearly arranged and maintenance-friendly
Best quality: accessories made of high-grade stainless steel
7
Certifi ed qualityOur sterilizers are all manufactured in Switzerland. They are subjected to a strict quality inspection and meet all the current
standards and medical devices directives. That way we ensure maximum safety and quality.
Highest standards of materials and workmanship
Our customers‘ requirements and the valid medical devices
directives are our benchmark when it comes to safety and
quality. Materials and components used from leading
manufacturers, in conjunction with state-of-the-art
production technologies, meet the highest quality
standards and ensure that the systems have a long,
reliable service life.
Safe, reliable and durable
The MST-V sterilizers are designed to handle heavy
workloads. For example, sophisticated chamber design in
conjunction with a sturdy door system ensures a
consistently high level of reliability and a long service life
for the systems. Top-quality stainless steel piping ensures
additional safety because it prevents the steam from
becoming contaminated, as can happen with conventional
piping.
Quality guarantees conformity with standards
Our sterilizers conform to all the applicable national and
international medical devices directives. ISO 17665, EN
285, ISO 9001, EN 46001, TÜV, ASME and FDA are just a
few of the internationally approved certifi cates and
standards. Production of the systems is monitored and
controlled by our seamless quality management system.
8
ICS 8535 cycle documentation system
Integrated printer in front panel
Cycle data – transparent and fully traceableAs part of their quality management system more and more hospitals want to generate and store
detailed, seamless data and information about the reprocessing performed on their medical devices
by equipment such as sterilizers. With the Belimed ICS 8535 cycle documentation system, which is
an available option, we offer an IT-based solution for ensuring seamless traceability of medical
devices between reprocessing and use in the operating room.
Fast and easy –
cycle documentation with integrated printer
A standard, integrated printer records and prints key cycle
data on a paper strip. The basic requirements for
mandatory documentation can be met without the need
for any additional software.
Detailed cycle reports for seamless documentation
All the necessary process data and information is recorded
by the optional Belimed ICS 8535 cycle documentation
system and saved on an external data storage device. The
data can be retrieved at any time to print out detailed
cycle reports. The cost involved in documentation and data
management is thus considerably reduced.
Data Acquisition PC
Hub/Switch
WD 290 WD 350 Dual-Washer MST-V
Seamless data traceability
The Belimed ICS 8535 cycle documentation system can be
easily expanded, at any time. Additional Belimed
equipment can be integrated into the system and
networked with existing equipment, even at a later date.
Integration into existing IT systems, such as instrument
management or tracking software, is also possible. Via a
defi ned, open interface the process data needed for further
processing can be sent directly to all current software
systems on the market. In this way the individual process
steps are documented automatically. Belimed has
extensive experience in implementing such projects.
9
Applications and standard programs
The MST-V sterilizer offers a selection of different
programs. The required test programs, such as the
Bowie-Dick test and the vacuum test, are available for
routine checking of sterilizer functions. The programs can
be started automatically, at the start of the day, so that
the sterilizers are ready to be used immediately at the
start of work. Program parameters (number of fractions,
sterilization times, sterilization temperatures, drying times,
etc.) can be customized.
Optimized and type-tested standard programs allow the sterilization of instruments, textiles and porous items. We attach
particular importance to safe handling, short cycle times and optimum drying with minimum energy and resources consumption.
An extract from our standard programs
Program/temperature Application Sterilization time (min) Drying time (min)
FRVV-VMT/134° C
Solid items to be sterilized:• Packaged instruments• Empty glass containers• Empty metal containers
3-5 20
FRVV-VMT/134° CItems diffi cult to extract air from• Textiles
3-5 6
FRVV-VMT/121° C Porous items to be sterilized 20 6
FRVV-VMT/134° C 134° C special 3-60 6
Test programs and utilities
VOVV-VMT/134° C Heating program 3-5 3
Vacuum test – –
Bowie-Dick test 3.5 3
FRVV-VMT = Fractionated pre-vacuum process – vacuum with drying
Dimensions
Chamber volume
StE1
Model Chamber dimensions(H × W × D) (mm)
Machine dimensions(H × W × D) (mm)
Loading height(mm)
Single-door Two-door
4 6-6-6 VS1 6-6-6 VS2 660 × 660 × 700 1970 × 990 × 1120 (1095)2 785
6 6-6-9 VS1 6-6-9 VS2 660 × 660 × 1000 1970 × 990 × 1420 (1395)2 785
8 6-6-12 VS1 6-6-12 VS2 660 × 660 × 1350 1970 × 990 × 1775 (1750)2 785
12 6-6-18 VS2 660 × 660 × 2000 1970 × 990 × 2420 (2395)2 785
1 1 StE = 300 × 300 × 600 mm2 Dimensions of the single-door version
10
Our services extend from initial consultancy to IQ (Installation Qualifi cation), OQ (Operating Qualifi cation) and PQ (Performance Qualifi cation).
Comprehensive range of services – for a consistently high level of reliabilityAfter the delivery of our products we continue to support you with a comprehensive selection of
maintenance and service packages. Consequently, you benefi t from our experience and expertise
at all times.
Professional services
We rely on long-term partnerships in order to boost the
productivity of our customers on a continuing basis. We
achieve this goal with an integral maintenance and service
package. Our comprehensive range of services includes
knowledgeable consulting, customized training, installa-
tion and commissioning, regular validation procedures,
maintenance and support.
Personal and close at hand
The global presence of Belimed, with its own branch
offi ces, authorized partners and a close-knit service
network, makes communication fast. Our customers
benefi t from fast response times, immediate availability of
spare parts and personal, skilled support in the fi eld. The
primary aim of our services is to provide maximum
productivity and system availability for our customers.
Short response times, personal, skilled support in the fi eld – service and maintenance are key elements of Belimed quality management.
11
MP
202
1.02
.102
1E
AUSTRIABelimed GmbHGrüne Lagune 18350 FehringTel. +43 3155 40 699 0Fax +43 3155 40 699 [email protected]
BELGIUMNV Belimed SARue de Clairvaux 81348 Louvain-La-NeuveTel. +32 10 42 02 40Fax +32 10 42 02 [email protected]
CHINABelimed Medical Equipment (Shanghai) Co., Ltd CaiLun Road 780, 5th fl oor, Room HZhangJiang Hi-Tech Park 201203 Pudong, Shanghai Tel. +86 21 513 709 98 Fax +86 21 513 709 96 [email protected]
FRANCEBelimed SASParc GVIO330 Allée des Hêtres, Hall E69760 LimonestTel. +33 4 37 41 63 03Fax +33 4 37 41 63 [email protected]
Branch Offi ceBelimed SAS ZAC Saumaty Séon19 rue Gaston Castel13016 Marseille Tel. +33 4 96 15 22 10 Fax +33 4 96 15 22 19 [email protected]
Branch Offi ceBelimed SASParc Espale 1, av. Pierre Pfl imlin68390 SausheimTel. +33 3 89 63 65 40Fax +33 3 89 63 65 [email protected]
GERMANYBelimed Deutschland GmbHEdisonstrasse 7a84453 Mühldorf am InnTel. +49 8631 9896 0Fax +49 8631 9896 [email protected]
Branch Offi ce West Belimed Deutschland GmbHEmil-Hoffmann-Strasse 2750996 KölnTel. +49 2236 9642 0Fax +49 2236 9642 [email protected]
HUNGARYBelimed Infection Control Kft.Gyergyó utca 5.1026 BudapestTel. +36 1 318 86 97 Fax +36 1 318 87 [email protected]
NETHERLANDSBelimed B.V.Vlambloem 653068 JG RotterdamTel. +31 10 286 17 50Fax +31 10 456 56 [email protected]
SLOVENIABelimed d.o.o.Kosovelova cesta 21290 GrosupljeTel. +386 1 7866 010Fax +386 1 7866 [email protected]
SWITZERLANDBelimed Sauter AGZelgstrasse 88583 SulgenTel. 0848 55 88 11Fax +41 71 644 86 [email protected]
UNITED KINGDOMBelimed LimitedUnit 4 Newbuildings PlaceDragons Green RoadShipleyWest Sussex, RH13 8GQTel. +44 1403 738 811Fax +44 1403 730 [email protected]
USABelimed, Inc.2284 Clements Ferry Road Charleston, SC 29492 Tel. +1 843 216 7424 Fax +1 843 216 [email protected]
OTHER COUNTRIESMedical/Medical LabBelimed AGDorfstrasse 46275 BallwilSWITZERLANDTel. +41 41 449 78 88Fax +41 41 449 78 [email protected]
OTHER COUNTRIESPharma/Pharma LabBelimed Sauter AGZelgstrasse 88583 SulgenSWITZERLANDTel. +41 71 644 85 00Fax +41 71 644 86 [email protected]
www.belimed.com
HMTS-80E
“Can endoscopes be sterilized thoroughly?”
“Is the sterilization cost reasonable?”
“Are you fully prepared for meeting new and more stringent environmental regulations?”
“Do you want quick sterilization?”
“Is your sterilizer easy to operate?”
HMTS SERIES
Low Temperature Hydrogen Peroxide Sterilizer
E
1) ISO 14971: 2007 Medical Device. Application of risk management to medical devices2) ISO 14937: 2009 Sterilization of health care products3) ISO 10993-5: 2009 Biological evaluation of medical devices – Part 5: Tests for in vitro cytotoxicity4) EN 61010-1: 2010 Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements. 5) EN 61010-2-040: 2015 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials 6) EN 60601-1-2: 2015. Medical electrical equipment. General requirements for safety. Collateral standard. Electromagnetic compatibility. Requirements and tests.
Operating system: Windows Embedded (Standard 7)User interface: 6.4” TFT Touch Monitor and Audible Alarm Network: 100/10 Mbps Ethernet Print: Built-in thermal printerSelf-test: Functions are available
HMTS-80E
Address: (Gasan-dong, 2),135, Gasan Digital 2-ro, Geumcheon-gu, Seoul, Korea, 08504Tel: +82.2.6292.2568 Fax: +82.2.868.1511 Email: [email protected] Website: www.hmmdt.com
Dimensions, Weight Sterilization Chamber
HMTS-80E Sterilization System CycleNormal cycle (Dual cycle)
Vacuum 1 Stage Diffusion 1 Stage Vacuum 2 Stage with Plasma 1 Stage Diffusion 2 StagePlasma 2 StageVent & Dry Run StageTotal Cycle Time
Initial evacuation of sterilization chamberAutomatic injection and diffusion stage
Automatic injection and diffusion stage
Re-evacuation of sterilization chamber
Re-evacuation of sterilization chamberReturn of sterilization chamber to atmospheric pressure and re-evacuation of chamberSurface: 25±3 min, Standard: 38±3 min, Advanced: 53±3 minSurface: 28±3 min, Standard: 38±3 min, Advanced: 58±3 min
Cycle time varies depending on the type of load being sterilized.
Installation and Operating Requirements Regulatory Approvals
Normative Reference
Features
Total Volume 80 L (2.83 cubic feet)Usable Volume 71 L (2.5 cubic feet)Dimensions (W x H x D) Ø400 mm x 650 mm (D) (Ø15.7 in x 25.6 in)Shelf Strength 35 kg (77 lbs)Shelf Dimensions (W x D) Upper: 380 mm x 635 mm (14.9 in x 25 in) Lower: 260 mm x 635mm (10.2 in x 25 in)
(29.5 in)(65.7 in)(32.9 in)
(948 lbs)
Size Width 750 mm Height* 1670 mm Depth 835 mm
Weight 430 kg *Including built-in wheels
Low Temperature Hydrogen Peroxide Sterilizer
3 Phase1 Phase
Electricity:220~240 VAC, 50/60 Hz, 3.5KW, 1-Phase200/208/220/240/380/400/415VAC, 50/60 Hz. 5KW, 3-Phase
Placement:Built-in wheels provide mobility
Operational Environment:Temperature: 18°C – 35°C (64.4°F – 95°F)Humidity: 10% – 85% RH (Non-condensing)
Installation space:Minimum area: 1290 mm x 1750 mm (50.7 in x 68.8 in)Surface: Flat = 5 mm/m (0.188 in / 3 feet)Minimum distance from wall: 300 mm (11.8 in)Minimum service access: 1 m (3 feet) on all sides
1) Medical Devices Directive 93/42/EEC2) ISO 13485: 2003 Quality management systems - Medical devices - Design, development and manufacture of low temperature hydrogen peroxide sterilizer and hydrogen peroxide sterilant agent for use in HMTS series. 3) KGMP (Korea Good Manufacturing Practice)
LL-80E (Rev.14)
“Can endoscopes be sterilized thoroughly?”
“Is the sterilization cost reasonable?”
“Are you fully prepared for meeting new and more stringent environmental regulations?”
“Do you want quick sterilization?”
“Is your sterilizer easy to operate?”
HMTS SERIES
Low Temperature Hydrogen Peroxide Sterilizer
Operating system: Windows Embedded (Standard 7)User interface: 8.4” TFT Touch Monitor and Audible Alarm provide proper data-acquisition.Network: 100/10 Mbps Ethernet Print: Built-in dot printerDoor: Sliding door systemSelf-test: Functions are available
8
1) ISO 14971: 2007 Medical Device. Application of risk management to medical devices2) ISO 14937: 2009 Sterilization of health care products3) ISO 10993-5: 2009 Biological evaluation of medical devices – Part 5: Tests for in vitro cytotoxicity4) EN 61010-1: 2010 Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements. 5) EN 61010-2-040: 2015 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials 6) EN 60601-1-2: 2015. Medical electrical equipment. General requirements for safety. Collateral standard. Electromagnetic compatibility. Requirements and tests.
Address: (Gasan-dong, 2),135, Gasan Digital 2-ro, Geumcheon-gu, Seoul, Korea, 08504Tel: +82.2.6292.2568 Fax: +82.2.868.1511 Email: [email protected] Website: www.hmmdt.com
Dimensions, Weight Sterilization ChamberSize Width 833 mm Height* 1688 mm Depth 1016 mm
Weight 550 kg
(32.8 in)(66.4 in)(40.0 in)
(1212 lbs)*Including built-in wheels
Total Volume 142 L (5.01 cubic feet)Usable Volume 120 L (4.24 cubic feet)Dimensions (W x H x D) 425 mm x 425 mm x 790 mm (16.7 in x 16.7 in x 31.1 in)Shelf Strength 35 kg (77 lbs)Shelf Dimensions (W x D) Upper: 415 mm x 775 mm (1 to 3 shelves) (16.3 in x 30.5 in) Lower: 410 mm x 775mm (16.1 in x 30.5 in)
HMTS-142 Sterilization System Cycle
Vacuum 1 Stage Diffusion 1 Stage Vacuum 2 Stage with Plasma 1 Stage Diffusion 2 StagePlasma 2 StageVent & Dry Run StageTotal Cycle Time
Initial evacuation of sterilization chamberAutomatic injection and diffusion stage
Automatic injection and diffusion stage
Re-evacuation of sterilization chamber
Re-evacuation of sterilization chamberReturn of sterilization chamber to atmospheric pressure and re-evacuation of chamberSurface: 30±3 min, Standard: 60±3 min, Advanced: 60±3 minSurface: 35±3 min, Standard: 68±3 min, Advanced: 76±3 min
Cycle time varies depending on the type of load being sterilized.
Regulatory ApprovalsInstallation and Operating Requirements
Normative Reference
Features
Low Temperature Hydrogen Peroxide Sterilizer
3 Phase1 Phase
Electricity:220~240 VAC, 50/60 Hz, 3.5KW, 1-Phase200/208/220/240/380/400/415VAC, 50/60 Hz. 5KW, 3-Phase
Placement:Built-in wheels provide mobility
Operational Environment:Temperature: 18°C – 35°C (64.4°F – 95°F)Humidity: 10% – 85% RH (Non-condensing)
Installation space:Minimum area: 1290 mm x 1750 mm (50.7 in x 68.8 in)Surface: Flat = 5 mm/m (0.188 in / 3 feet)Minimum distance from wall: 300 mm (11.8 in)Minimum service access: 1 m (3 feet) on all sides
1) Medical Devices Directive 93/42/EEC2) ISO 13485: 2003 Quality management systems - Medical devices - Design, development and manufacture of low temperature hydrogen peroxide sterilizer and hydrogen peroxide sterilant agent for use in HMTS series. 3) KGMP (Korea Good Manufacturing Practice)
HMTS SERIES
“Can endoscopes be sterilized thoroughly?”
“Is the sterilization cost reasonable?”
“Are you fully prepared for meeting new and more stringent environmental regulations?”
“Do you want quick sterilization?”
“Is your sterilizer easy to operate?”
HMTS-142D
Low Temperature Hydrogen Peroxide Sterilizer
1) ISO 14971: 2007 Medical Device. Application of risk management to medical devices2) ISO 14937: 2009 Sterilization of health care products3) ISO 10993-5: 2009 Biological evaluation of medical devices – Part 5: Tests for in vitro cytotoxicity4) EN 61010-1: 2010 Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements. 5) EN 61010-2-040: 2015 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials 6) EN 60601-1-2: 2015. Medical electrical equipment. General requirements for safety. Collateral standard. Electromagnetic compatibility. Requirements and tests.
Operating system: Windows Embedded (Standard 7)User interface: 10.4” TFT Touch Monitor and Audible Alarm provide proper data-acquisition.Network: 100/10 Mbps Ethernet Print: Built-in dot printerDoor: Sliding and Double door systemSelf-test: Functions are available
Address: (Gasan-dong, 2),135, Gasan Digital 2-ro, Geumcheon-gu, Seoul, Korea, 08504Tel: +82.2.6292.2568 Fax: +82.2.868.1511 Email: [email protected] Website: www.hmmdt.com
Sterilization ChamberDimensions, Weight
HMTS-142D Sterilization System Cycle
Installation and Operating Requirements
Features
Regulatory Approvals
Normative Reference
Size Width 1050 mm Height* 1688 mm Depth 1075 mm
Weight 640 kg
(41.3 in)(66.5 in)(42.3 in)
(1411 lbs)*Including built-in wheels
Total Volume 142 L (5.01 cubic feet)Usable Volume 120 L (4.24 cubic feet)Dimensions (W x H x D) 425 mm x 425 mm x 790 mm (16.7 in x 16.7 in x 31.1 in)Shelf Strength 35 kg (77 lbs)Shelf Dimensions (W x D) Upper: 415 mm x 775 mm (1 to 3 shelves) (16.3 in x 30.5 in) Lower: 410 mm x 775mm (16.1 in x 30.5 in)
Normal cycle (Dual cycle)
Vacuum 1 Stage Diffusion 1 Stage Vacuum 2 Stage with Plasma 1 Stage Diffusion 2 StagePlasma 2 StageVent & Dry Run StageTotal Cycle Time
Initial evacuation of sterilization chamberAutomatic injection and diffusion stage
Re-evacuation of sterilization chamber
Automatic injection and diffusion stageRe-evacuation of sterilization chamberReturn of sterilization chamber to atmospheric pressure and re-evacuation of chamberSurface: 30±3 min, Standard: 60±3 min, Advanced: 60±3 minSurface: 35±3 min, Standard: 65±3 min, Advanced: 70±3 min
Cycle time varies depending on the type of load being sterilized.
Low Temperature Hydrogen Peroxide Sterilizer
3 Phase1 Phase
Electricity:220~240 VAC, 50/60 Hz, 3.5KW, 1-Phase200/208/220/240/380/400/415VAC, 50/60 Hz. 5KW, 3-Phase
Placement:Built-in wheels provide mobility
Operational Environment:Temperature: 18°C – 35°C (64.4°F – 95°F)Humidity: 10% – 85% RH (Non-condensing)
Installation space:Minimum area: 1290 mm x 1750 mm (50.7 in x 68.8 in)Surface: Flat = 5 mm/m (0.188 in / 3 feet)Minimum distance from wall: 300 mm (11.8 in)Minimum service access: 1 m (3 feet) on all sides
1) Medical Devices Directive 93/42/EEC2) ISO 13485: 2003 Quality management systems - Medical devices - Design, development and manufacture of low temperature hydrogen peroxide sterilizer and hydrogen peroxide sterilant agent for use in HMTS series. 3) KGMP (Korea Good Manufacturing Practice)
HMTS SERIES
“Can endoscopes be sterilized thoroughly?”
“Is the sterilization cost reasonable?”
“Are you fully prepared for meeting new and more stringent environmental regulations?”
“Do you want quick sterilization?”
“Is your sterilizer easy to operate?”
Low Temperature Hydrogen Peroxide Sterilizer
Electricity:200 ~ 240 VAC, 50~60 Hz, 3 kW, 1 Phase
Placement:Built-in wheels provide mobility
Operational Environment:Temperature: 18°C – 35°C (64.4°F – 95°F)Humidity: 10% – 85% RH (Non-condensing)
Installation space:Minimum area: 1057 mm x 1056 mm (41.6 in x 41.5 in)Surface: Flat = 5 mm/m (0.188 in / 3 feet)Minimum distance from wall: 300 mm (11.8 in)Minimum service access: 1 m (3 feet) on all sides
Operating system: Windows Embedded (Standard 7)User interface: 7” TFT Touch Monitor and Audible Alarm provide proper data-acquisition.Network: 100/10 Mbps Ethernet Print: Built-in thermal printerSelf-test: Functions are available
1) ISO 14971: 2007 Medical Device. Application of risk management to medical devices2) ISO 14937: 2009 Sterilization of health care products3) ISO 10993-5: 2009 Biological evaluation of medical devices – Part 5: Tests for in vitro cytotoxicity4) EN 61010-1: 2010 Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements. 5) EN 61010-2-040: 2015 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials 6) EN 60601-1-2: 2015. Medical electrical equipment. General requirements for safety. Collateral standard. Electromagnetic compatibility. Requirements and tests.
Size Width 740 mm Height 825 mm (With Cart) 1350 mm Depth 725 mm
Weight 160 kg
(29.1 in)(32.6 in)(53.1 in)(27.6 in)
(352.7 lbs)
Address: (Gasan-dong, 2),135, Gasan Digital 2-ro, Geumcheon-gu, Seoul, Korea, 08504Tel: +82.2.6292.2568 Fax: +82.2.868.1511 Email: [email protected] Website: www.hmmdt.com
Total Volume 34 L (1.2 cubic feet)Usable Volume 30 L (1.0 cubic feet)Dimensions (W x H x D) 340 mm x 170 mm x 600 mm (13.4 in x 6.7 in x 23.6 in)Shelf Strength 25 kg (55 lbs)Shelf Dimensions (W x D) 320 mm x 560 mm
Dimensions, Weight Sterilization Chamber
HMTS-30E Sterilization System CycleNormal cycle (Dual cycle)
Vacuum 1 Stage Diffusion 1 Stage Vacuum 2 Stage with Plasma 1 Stage Diffusion 2 StagePlasma 2 StageVent & Dry Run StageTotal Cycle Time
Initial evacuation of sterilization chamberAutomatic injection and diffusion stage
Automatic injection and diffusion stage
Re-evacuation of sterilization chamber
Re-evacuation of sterilization chamberReturn of sterilization chamber to atmospheric pressure and re-evacuation of chamberSurface: 15±3 min, Standard: 27±3 min, Advanced: 39±3
Installation and Operating Requirements
Features
Regulatory Approvals
Normative Reference
Cycle time varies depending on the type of load being sterilized.
Low Temperature Hydrogen Peroxide Sterilizer
1) Medical Devices Directive 93/42/EEC2) ISO 13485: 2003 Quality management systems - Medical devices - Design, development and manufacture of low temperature hydrogen peroxide sterilizer and hydrogen peroxide sterilant agent for use in HMTS series. 3) KGMP (Korea Good Manufacturing Practice)
ACCESSORIESP L A S M A S T E R I L I Z E R
POUCHES PRINTER PAPERSFor packing medical devicesSealing temperature: 115°C – 130°CMaterial Front: LDPE Back: Tyvek® Size: 75, 100, 150, 200, 250, 300, 350, 400, 500 mmLength: 70 mShelf life: 5 years under dryconditions
Thermal printer
- HMTS-80E Size: Ø50 x 57mm x 20m- HMTS-30E Size: Ø50 x 40mm x 20mDot printer- HMTS-142, 142D Size: Ø50 x 57mm x 20m
INCUBATORS SEALERSFor incubating biologicalindicatorTemperature stability:60°C ± 2°C (140°F ± 3.6°F)Electricity: 100 – 240 VAC 50 – 60 Hz
For packaging of sealable pouches Process:Automatic / ReproducibleSize (W x D x H):560mm x 250mm x 145mmElectricity: 230VAC 50 – 60Hz 390VA
LOADING BASKETSFor loading items to be sterilized 2 baskets / setMaterial: SUS304Size (W x D x H):240mm x 550mm x 125mm - HMTS-80E, 30E375mm x 755mm x 162mm - HMTS-142, 142D
Address: (Gasan-dong, 2),135, Gasan Digital 2-ro, Geumcheon-gu, Seoul, Korea, 08504Tel: +82.2.6292.2568 Fax: +82.2.868.1511 Email: [email protected] Website: www.hmmdt.com
Low Temperature Hydrogen Peroxide Sterilizer System
LL-AC(Rev. 9 / 2017 Jan)
ACCESSORIESP L A S M A S T E R I L I Z E R
STERILANT
BIOLOGICAL INDICATORS
CHEMICAL INDICATOR STRIPS
CHEMICAL INDICATOR TAPES
Exclusive use with HMTS sterilization systemBar color changes from red to orange (or brighter) when exposed to H2O2
Exclusive use with HMTS sterilization systemBar color changes from red to yellow when exposed to H2O2
Chemicals: Hydrogen PeroxideConcentration: 50%Type - HMSA-80 (HTMS-Series)
Shelf life: 18 months (inside refrigerator), 10 months (room temperature) 1 month (after installation)
Sterilization Process Monitoring(Self contained biological indicator, microorganism: Geobacillus Stearothermophilus)
Culture medium color: Purple / YellowStorage: 2°C – 25°C. ≤60% relative humidity. Protect from freezing, sterilants and lights. Do not refrigerate.Shelf life: 12 monthsIncubation time: 24 hours
Wear personal protective equipment whenever handling sterilants.When exposed to the sterilant, wash promptly and thoroughly with water for 30 minutesSingle use only.
Do not use damaged units. Handle with care. Wear gloves and goggles when handling sterilized vials and when crushing vials. Single use only.
Store at 15°C - 30°C under dry conditions. (Relative Humidity : 10% to 50%)Store away from hydrogen peroxide and alkaline chemicals. Single use only
processed
processed
Shelf life: 2 years
Store at 15°C - 30°C under dry conditions. (Relative Humidity : 30% to 80%).Store away from hydrogen peroxide and alkaline chemicals. Single use only.
Shelf life: 3 years
RED YELLOW
REDORANGE to YELLOW
HUMANMEDITEK
For packaging of sealable pouches Process:Automatic / ReproducibleSize (W x D x H):560mm x 250mm x 145mmElectricity: 230VAC 50 – 60Hz 390VA