Embed Size (px)
Citation preview
Peter
Page:Rev. :
Layout:Scale:
1 of 5
12
Chris
1/10th
212 714-0430
manhattanneon.com
t:e:w:
NYSC
4-7-17
NEW YORK SPORTS CLUBS SIGN LOCATION
SITE PLAN4 Astor PlaceNewYork, NY 10003
DASHED LINEREPRESENTSAREA OF NEWWORK
Edge Illuminated Reverse Channel LettersExterior/Entrance
4 Astor Place Exterior Entrance
Peter
Page:Rev. :
Layout:Scale:
2 of 5
12
Chris
1/10th
212 714-0430
manhattanneon.com
t:e:w:
NYSC
4-7-17
EXISTING SIGNAGE/AREA OF PROPOSED NYSC SIGNAGE
4 Astor PlaceNewYork, NY 10003
Qty:12 - 6”x 6” x .25”thkSS Plates Anchored To Exterior WallUsing 6“ Lag Bolts(plate to have 2” welded sleevefor various sized welded tubing to fit witin)2” sleeve and various tubes to haveholes for bolt to fit thru and secure.Painted same as Aluminum Tube FrameworkEXISTING HOLES IN FACADE USED FORALL MOUNTING/INSTALLATION
386.11”
388.11”
385.125”
18”
23.94”
25.94”
24.82” “T” height
22.82” “T” height
69.8 SQ. FT.
Completed Look - Fabricated Letters Attached To Aluminum Framework
Edge-Illuminated Reverse Channel LettersPainted White on Face & Sides, High Gloss Finish1/2” thick milk white plexi back with1/4” reveal. Internally illuminated withWhite LEDs. LETTERS DESIGNED FOR FLUSH MOUNT INSTALLATIONTO MATTE BLACK ALUMINUM LETTERS USING NUTS ANDBOLTS.
2” Fabricated/Welded Square Aluminum Tube FramingPainted To Match Existing Duranodic Storefront
1/4” CNC Cut Aluminum LettersPainted Matte BlackMechanically Fastened To Aluminum Frame With Nuts & Bolts
Edge Illuminated Reverse Channel LettersExterior/Entrance
Peter
Page:Rev. :
Layout:Scale:
3 of 5
12
Chris
1/10th
212 714-0430
manhattanneon.com
t:e:w:
NYSC
4-7-17
PROPOSED NYSC SIGNAGE ELEVATION
4 Astor Place
NewYork, NY 10003
DASHED LINEREPRESENTSAREA OF NEWWORK
4 Astor Place Exterior Entrance - Existing Signage
4 Astor Place Exterior Entrance - Proposed Signage
±26
2” (V
IF)
±396” (VIF)
ground
Weep Holes At Bottom of Returns
Edge-Illuminated Reverse Channel LettersPainted White on Face & Sides, Satin Finish.(2” total return)1/2” thick milk white plexi back with1/4” reveal. Internally illuminated withWhite LEDs.LETTERS TO HAVE REMOVABLE FACE FOR SERVICING(using counter sunk set screws) LETTERS DESIGNED FOR FLUSH MOUNT INSTALLATIONTO MATTE BLACK ALUMINUM LETTERS USING NUTS ANDBOLTS.
2” Fabricated/Welded Square Aluminum Tube FramingPainted To Match Existing Duranodic Storefront
1/4” CNC CUT ALUMINUM LETTERSPainted Matte Black(1” offset of illuminated channel letter)mechanically fastened to square tube frameworkusing nuts and bolts.
Edge Illuminated Reverse Channel LettersExterior/Entrance
Peter
Page:Rev. :
Layout:Scale:
4 of 5
12
Chris
1/10th
212 714-0430
manhattanneon.com
t:e:w:
NYSC
4-7-17
PROPOSED NYSC SIGN DETAIL
4 Astor PlaceNewYork, NY 10003
6”
6”
Existing Holes In FacadeTo Be Used For InstallationOf NEW Sign
Existing Sign (reference)2” x 2” x 7” long tubewelded to framework(NOT TYPICAL, SIZES VARY)
6”x 6” x .25”thkSS Plate Anchored To Exterior Wall
Using 6“ Lag Bolts(plate to have 2” welded sleeve
for various sized welded tubing to fit within)2” sleeve and various sized tubes to have
holes for bolt to fit thru and secure.(use existing mounting holes)
SS Plate Painted Same As Aluminum Framework
Faca
de
Faca
de
Faca
de
Faca
de
Faca
de
Qty: 12
Ledge
1/4” Reveal
22.8”
1” (all around offset)
White LEDs
1/2” Milk White Plexi(1/4” reveal)
2”
2”
2” x 2” x 7” long tubewelded to framework(NOT TYPICAL, SIZES VARY)
7”
Edge Illuminated Reverse Channel LettersExterior/Entrance
Peter
Page:Rev. :
Layout:Scale:
5 of 5
12
Chris
1/10th
212 714-0430
manhattanneon.com
t:e:w:
NYSC
4-7-17
PROPOSED NYSC SIGN MOUNTING DETAIL
4 Astor PlaceNewYork, NY 10003
1/4” CNC Cut Steel Letters
