NX | Mini-SAS | QSFP+ | SFP+...CX4 3.125 Gb/s 24 AWG IB SDR 2.5 Gb/s IB DDR* 5.0 Gb/s IB QDR 10.0 Gb/s CX4 3.125 Gb/s Meritec High Performance 4X (SFF-8470) Cable Assemblies Data Rate

HIGH BANDWIDTHHIGH BANDWIDTH


Solving Interconnect Problems Quickly Since 1966

Design Through Manufacture of High-Performance-Interconnect Systems,Connectors & Cable Assemblies

Innovative-Interconnect Solutions

NX | Mini-SAS | QSFP+ | SFP+


Command+Shift Click to Override Master Object> Edit QR Code… paste PDF URL from WordPress Media Panel. Override Product Name and PDF Document Type for each QR. Use Adobe PDF Preset “QR wName Layer” to export just that page number. High Bandwidth Brochure.pdf

Members

High Bandwidth

http://meritec.com/wp-content/uploads/2015/02/MERITEC-New-HBW-NX-Mini-SAS-QSFP-SFP-4-12XDataRates-1409.pdf

S2

S1

S16

S15P1

S2

S1

S16

S15P2

[14.2].56

[8.7].34

[24.7].97

[7.0].28

[46.6]1.84

[8.7].34

[9.7].38[14.3]

.56

[29.7]1.17

[6.7].26

[42.8]1.69

Latch Actuator

Length

M2.5 Thumbscrew

4X & 12XDirect

Attach

Direct Attach

Wafer-Based Design

Meritec’s 4X (SFF-8470) Direct AttachUL Listed Materials & RoHS Compliant

See page 7 for more configurations

Features & Benefits

• Available in 24, 26, 28 & 30 AWG• Optional connectors available• Supports data rates in excess of 6.0 Gb/s• Meets or exceeds SAS, InfiniBand,

Ethernet CX4 & SATA specs• Matched impedance design of

100 Ohm ± 10%

• Mated cycles: 250 Minimum• Fully electrically tested• Available lengths built to order• LSZH jacketed cable• Durable SFF-8470 design

Wiring DiagramPlug 1 Plug 2

S1 S16S2 S15S3 S14S4 S13S5 S12S6 S11S7 S10S8 S9S9 S8S10 S7S11 S6S12 S5S13 S4S14 S3S15 S2S16 S1

2 High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ www.meritec.com

888-MERITEC (637-4832)

S2

S1

S48

S47P1

S2

S1

S48

S47P2

[14.7].58

[8.7].34

[49.0]1.93

[6.9].27

[48.2]1.90

[8.7].34

[9.7].38

[14.3].56

[53.6]2.11

[6.9].27

[48.5]1.91

Latch Actuator

Length

M2.5 Thumbscrew

See page 7 for more configurations

Contact Meritec for more information about custom orders or to ask about your technical needs.

Specifications

• Contact Material: Copper Alloy• Standard Contact Finish: 30

micro" Au / 50 micro" Ni• Die-Cast Shell with Ni Plating• Durability: 250 cycles

Meritec’s 12X (SFF-8470) Direct AttachUL Listed Materials & RoHS Compliant

Environmental Specs

• UL Listed materials• Temperature rating:

–20 °C to +75 °C• RoHS Compliant


S1 S48S2 S47S3 S46S4 S45S5 S44S6 S43S7 S42S8 S41S9 S40S10 S39S11 S38S12 S37







888-MERITEC (637-4832) High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ 3

www.meritec.com


888-MERITEC (637-4832)

IB refers to InfiniBand™ Trade Association Specification / CX4 refers to the 10GBase Ethernet-CS4 Specification.

* The InfiniBand DDR lengths for each gauge are based on Meritec’s testing with a Qlogic/Silverstorm 24-Port Switch P/N 9024-CU24-ST2-DDR using the outermost (worst-case) mezzanine ports (top row, extreme left and right-hand)

MERITEC • 1359 WEST JACKSON STREET • PAINESVILLE, OHIO 44077 USAPHONE: (440) 354-2100 | FAX: (440) 354-5692© Meritec 101203

Length, Meters – > 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 19 20 21 18 19 20 2130 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s

CX4 3.125 Gb/s

28 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s

CX4 3.125 Gb/s


CX4 3.125 Gb/s


CX4 3.125 Gb/s

Meritec High Performance 4X (SFF-8470) Cable AssembliesData Rate – Wire Gauge vs. Performance Over Length

Length, Meters – > 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 19 20 21 18 19 20 2130 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s

CX4 3.125 Gb/s


CX4 3.125 Gb/s


CX4 3.125 Gb/s


CX4 3.125 Gb/s

Meritec High Performance 4X (SFF-8470) Cable AssembliesData Rate – Wire Gauge vs. Performance Over Length

4X | 12XAssembly

Description

Retention Mechanism1 = Latch Retention2 = Thumbscrew Retention

Retention Mechanism1 = Latch Retention2 = Thumbscrew Retention

Connector 1 (left)6 = 4X7 = 12X (Not Available in Z Axis or angled configuration)

Cable Egress1 = Straight2 = Angled3 = Z Axis4 = Belly to Belly

Cable Egress1 = Straight2 = Angled3 = Z Axis4 = Belly to Belly

Wire Style and AWG1 = 24 AWG (LSZH)2 = 26 AWG (LSZH)3 = 28 AWG (LSZH)4 = 30 AWG (LSZH)5 = 24 AWG (PVC)6 = 26 AWG (PVC)7 = 28 AWG (PVC)

Connector 1 (left) Orientation(See “Mech.Orient” sheet)Select one: A,C,E,G,I,K,M,O,S,W,Y

Connector 2 (right) Orientation(See “Mech.Orient” sheet)Select one: B,D,F,H,J,L,N,P,T,X,Z

Length00.5 = .5 meters 01.0 = 1 meter 10.0 = 10 meters

Note: Assembly Description shown above to be used for RFQs and ordering purposes. For application specific assemblies not shown in the table, please contact factory. This is not a part number.

Connector 2 (right)6 = 4X7 = 12X (Not available in Z Axis or angled configuration)

Please show below any specific labeling requirements. Default labeling includes: Meritec, P/N, and Date Code.

7 3 A 2 4 7 5 D 1 10.0


www.meritec.com

Z A

xis

Cab

le E

gres

s

Mechanical Orientation LettersLeft End Right End

Any available “Left End” can be paired with any available “Right End”

Inner edge of the backshell at the latch. See line drawing for details.

Note: Not Available with Printed Direct Attach (PDA) option

A B

C D

E F

G H

I J

K L

Z-A

xis

Cab

le E

gres

s

Z-A

xis

Cab

le E

gres

s

Z-A

xis

Cab

le E

gres

s

Z-A

xis

Cab

le E

gres

s

S T

Y Z

W X

M

P

Cable Assembly Nominal Length

Note: The broken line view is from the rear of the backshell and the solid line view is from the mating face of the connector.

Tolerance: 10 Meter, +/– 100mm

S1 Short Side Dn 4X/12X Straight Cable Egress Straight Cable Egress 4X/12X Short Side Up S1

Short Side Up S1 4X/12X Straight Cable Egress Straight Cable Egress 4X/12X S1 Short Side Dn

S1 Short Side Dn 4X

4X

4X

4X

Short Side Up S1

S1Short Side Up Short Side Dn S1

Angled Cable Egress

Angled Cable Egress

Angled Cable Egress

Angled Cable Egress

4X

4X

Short Side Up S1

Short Side Dn S1

Angled Cable Egress

Angled Cable Egress

4X

4X

Angled Cable Egress S1 Short Side Dn

Angled Cable Egress S1 Short Side Up

Short Side UpShort Side Dn

Short Side UpShort Side Dn

4X 4X

4X 4X

N

O

Cable Egress Cable Egress

No Termination No Termination

Outer Jacket Strip Outer Jacket Strip

Custom/Other Conn.Custom/Other Conn.

4X | 12XMechanical

Orientation


888-MERITEC (637-4832)

HBWHyBrids

+ Options

12X Daisy Chains

Belly-to-Belly Configuration

(2) 4X Angled 4X – (3) eSATA

4X Z-Axis Configuration

12X – (3) 4X Connections

QSFP+

SFP+


www.meritec.com

Meritec’s Feed-Thru Connectors are RoHS Compliant

P2P1

1.550

1.330

.281 .417

.600

1.000

(.030) (.035)

.775

2X 4-40 UNC .17

.575

4X 4-40 UNC .22

Receptacles

Board Receptacle & Feed-Through Mounts Available

Thumbscrew-to-Thumbscrew P/N 984001-004-T

RoHS Compliant

Also Available:Latch-to-Latch P/N 984001-004-L

Latch-to-Thumbscrew P/N 984001-004-LTS

Thumbscrew-to-Latch P/N 984001-004-TSL

4-Lane Feed-Thru Connector

Feed-Thru PinoutP1 P2S1 S16S2 S15S3 S14S4 S13S5 S12S6 S11S7 S10S8 S9S9 S8S10 S7S11 S6S12 S5S13 S4S14 S3S15 S2S16 S1

Panel-Mount Receptacle-Cable

Termination

New!New!

Consult factory.


888-MERITEC (637-4832)

NX+ Board-Mount Receptacle SFF-84734X & 12X Available

12.7 RemovablePick-and-Place Tab

13.0

8.50.5

Shown with optional panel mountShown without optional panel mount

29.8

34.3

2X 2-56 UNC Thru

Shown with optional side panel mount

S1

S1

6.6

S1

6.4

M2X0.4 Thru

4.

9

12

.7

EMIGasket

(Optional)

24.9

6.0

11.3

13

.0

14

.9

2.5 10

.2

15

.4

Visit www.meritec.com to download the complete SFF-8473 Datasheet. E-mail: [email protected]

Board Mount

Features & Benefits• Improved crosstalk and insertion loss• Performance enhanced to 20 Gb/s

per differential pair or lane, in combination with Meritec enhanced NX-capable assemblies

• Die-cast housing for rugged application• Screw & solder post hold-down features• Top and/or side-panel mount(s) available

• Latch & thumbscrew options available• Removable tab for pick-&-place

applications• SMT configuration• Supports Ethernet CX4, Myrinet, RapidIO,

Aurora and other high-speed applications

Specifications / Visit www.meritec.com/catalog


www.meritec.com

SFP+ & QSFP+SFF-8436, SFF-8470

SFF-8431, SFF8432

PAD 11

PAD 10

PAD 20Latch Pull

A

Detail A

Oprionl: Overmolded Plastic Nose Piece (Under Development)

PAD 018.55±0.15

13.55±0.25

57.50 Ref.

Length

Wiring DiagramP1 End P2 End

Pad Signal Pad Signal

01 GND 20 GND02 TX2n 21 RX2n03 TX2p 22 RX2p04 GND 23 GND05 TX4n 24 RX4n06 TX4p 25 RX4p07 GND 26 GND13 GND 32 GND14 RX3p 33 TX3p15 RX3n 34 TX3n16 GND 35 GND17 RX1p 36 TX1p18 RX1n 37 TX1n19 GND 38 GND20 GND 01 GND21 RX2n 02 TX2n22 RX2p 03 TX2p23 GND 04 GND24 RX4n 05 TX4n25 RX4p 06 TX4p26 GND 07 GND32 GND 13 GND33 TX3p 14 RX3p34 TX3n 15 RX3n35 GND 16 GND36 TX1p 17 RX1p37 TX1n 18 RX1n38 GND 19 GND

SFP+

Chart Suffix Wire Gauge (AWG)Length in Meters

at 10 Gb/sTolerance at

Maximum LengthA= 24 7 ± 70.0 mmB= 26 5 ± 70.0 mmC= 28 3 ± 70.0 mmD= 30 1 ± 70.0 mm

SFP+Passive Copper-Cable Assemblies are RoHS Compliant

Note: Tolerance of ± 40.0 mm for lengths of 0.5M to 1.0M consult factory for lengths less than 0.5M.

Part Number Ordering Specification:

9846 - Chart Suffix

(AWG)

– Length In Meters

•


888-MERITEC (637-4832)

P1 P2PAD 20

PAD 19

PAD 38

PAD 01

18.35±0.1

8.5±0.1

86.05

Length

QSFP+

Features & Benefits• Enhanced EMI shielding for low emissions• Ultra low crosstalk for enhanced

performance• Mates with all standard SFP+/QSFP interfaces• Lower cost alternative to fiber optics• RoHS Compliant & EEPROM Programmable

Cable Specifications• Supports/Exceeds 40 Gb/s Ethernet

IEEE802.3ba• SFF-8431/SFF-8436 Compliant• Fully shielded assembly with drain wire• Die cast metal housings• Ergonomic pull style latch to de-latch with

positive locking mechanism

Environmental Specs• Material – UL flame rating: 94V – 0• Temperature rating: –10 °C to +70 °C

QSFP+Passive Copper-Cable Assemblies are RoHS Compliant

Part Number Ordering Specification:

9841 - Chart Suffix

(AWG)

N N – Length In Meters

•


www.meritec.com



Solving Interconnect Problems Quickly Since 1966

Design Through Manufacture of High-Performance-Interconnect Systems,Connectors & Cable Assemblies


NX | Mini-SAS | QSFP+ | SFP+


Visit us online!

1359 West Jackson Street • Painesville, Ohio 44077 USA 440-354-2100 • Fax: 440-354-5692 • 800-860-9014 • 888-MERITEC (637-4832) www.meritec.com • E-mail: [email protected]

© Meritec 061920 • All rights reserved. • Document Number 0145883 Connectors Unlimited (CUI) and Mold-Tech (MT) Divisions are now merged and DBA Meritec.

1020 Marauder Street Chico, California 95973 USA 530-891-3551, Fax: 530-891-3599 888-891-3551 (Toll Free) www.joysignal.com E-mail: [email protected]

www.connectorsunlimited.com ISO Certification 9001:2015

NAICS# 334417 • 334418 334419 • 335929 • 335999Cage CodesMeritec 0RAG4 Connectors Unlimited 49MH9 Joy Signal Technology 1SJC3 Mold-Tech 1BCG6

http://www.meritec.com

High Bandwidth from Meritec4X (SFF-8470) Direct Attach12X (SFF-8470) Direct AttachData Rate – Wire Gauge vs. Performance Over Length4X/12X Assembly Description4X/12X Mechanical OrientationHBW Hybrids +OptionsNX+ Receptacles4-Lane Feed-Thru ConnectorBoard Mount Features & BenefitsSFP+QSFP+Meritec Contact Information

Button 2: Page 1:

Button 3: Page 12:

Documents

NX | Mini-SAS | QSFP+ | SFP+...CX4 3.125 Gb/s 24 AWG IB SDR 2.5 Gb/s IB DDR* 5.0 Gb/s IB QDR 10.0 Gb/s CX4 3.125 Gb/s Meritec High Performance 4X (SFF-8470) Cable Assemblies Data Rate