Normpumpen nach DIN EN 733 einschl NORMA J ( ) Standard ... Suction Centrifugal Pump.pdf · Normpumpen nach DIN EN 733 einschl . Standard horizontal pumps to DIN EN 733. Norma J (

Normpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733

PU

MP

S I

MO

TO

RS

I S

YS

TE

MS

I S

ER

VIC

ES

NORMA J ( )


Norma J ( ) Pumps can be used for the following services in the Commercial, Residential, Agricultural, Industrial, Process and Food & Beverage industries.

Design Data

Application

Introduction

• Air Conditioning

• Refrigeration

• Fire Protection

• Plumbing

• Circulating

• Transfer

• Irrigation

• Drainage

• Pressure Boosting

• Cooling Towers

• Water Treatment & Supply

Design DIN EN 733

Operating pressure 10 bar (standard), 16 bar (optional)

Hydrostatic Test pressure 15 bar (standard), 24 bar (optional)

Operation temperature -10°C to 105°C (standard), 160°C (optional)

Operation speeds 50 Hz, 1450 and 2900 rpm.60 Hz, 1750 and 3500 rpm.

Flange Drilled DIN 2533 PN10 (standard), PN16 (optional)

Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions and performance in accordance to DIN EN 733 standard.

Norma J ( ) Pumps are used primarily for handling clean or slightly abrasive media. Media pumped should not contain any coarse or highly abrasive solids which will cause operational problems and premature wear. Under such operating conditions special materials will have to be used and other Ritz Series of pumps may be applicable. Details on applications.

* Flange Face available in both Raised Face (RF) and Flat Face (FF).

2


Materials Of Construction

Description Standard Option Option Option Option OptionVolute Casing Cast Iron Ductile Iron SS304 SS316 SS316L Duplex SSCasing Wear Ring Cast Iron Ductile Iron SS304 SS316 SS316L Duplex SSImpeller Cast Iron Bronze/ZF Bronze SS304 SS316 SS316L Duplex SSShaft Sleeve SS420 SS420 SS304 SS316 SS316L Duplex SSShaft Carbon Steel SS420 SS304 SS316 SS431 SS1.4462Shaft Seal Gland Packing Carbon/Ceramic Sic/Carbon Sic/SicFlange Drilled ISO PN10/16 ANIS 125/150Lbs JIS 10/16KBearing Lub Greased OilSealing NBR Viton

Construction

Casing

Impeller

Bearing I Bearing Housing

Shaft

Stuffing Box

The heavy duty cast iron volute casing is of Robust design with integrally cast feet vertical top centre line discharge with axial suction incorporating cast inlet vane to give best flow to impeller eye. Also available for working pressures up to 16 bar. Centreline discharge assures that the casing is self-venting.

Hydraulically balanced double shrouded type is positively driven by shaft key and axially locked between sleeve and impeller nut.

Bearings are grease lubricated and fitted with grease nipples which allow periodic greasing. Permanently, sealed grease bearings or oil lubricated bearings are also available. Four bearing housings covers the entire range and are of rugged cast iron construction.

Interchangeability of the main pump parts. The Norma J ( ) Pump range has been designed on the basis of maximum component interchangeability. Only the impeller and casing, i.e. the hydraulic components designed specifically for each pump type are not interchangeable.

A domed type locking nut seals the stainless steel at the impeller. Only 4 shafts size is required to cover the complete range of 49 sizes, thus minimising inventory problems.

Standard stuffing box includes gland packing with a lantern ring incorporating high pressure internal flushing. External flushing can be fitted and pump can be supplied with mechanical seal.

3


50 Hz Performance

* Capacity above 10 bar on request.


4




60 Hz Performance

5


Cross Section With Parts List

PART NO DESCRIPTION ARRANGEMENT

0 1

STANDARD PACKED GLAND WITH MECHANICAL SEAL102 Volute casing 1 1

161.1 Gland housing 1 1

161.2 Seal housing 1

210 Shaft

230 Impeller 1 1

321 Ball bearing 2 2

330 Bearing housing 1 1

360 Bearing cover

400 Gasket 1 1

410 Profile-seal 2 2

433 Mechanical seal

452 Gland 1

459 Lantern ring 1

461 Gland packing

502 Casing wear ring 1 1

507 Water thrower 1 1

895 Supporting foot (on request)

921 Impeller nut 2 2

930 Circlip 2 2

940.1 Key 1 1

940.2 Key 1 1

6


Overall Dimensions

Model Dimension of pump Dimension of foot of pump End of shaft Weight (kg)DNS DND a f1 h1 h2 b c m1 m2 n1 n2 ØS1 n3

ØS2 w d1 l1 t u

32-13 50 32 80 360 112 140 50 14 100 70 190 140 14 100 14 267 24 50 27 8 27.5

32-16 50 32 80 360 132 160 50 14 100 70 240 190 14 100 14 267 24 50 27 8 35

32-20 50 32 80 360 160 180 50 14 100 70 240 190 14 110 14 267 24 50 27 8 41

32-26 50 32 100 360 180 225 65 14 125 95 320 250 14 110 14 267 24 50 27 8 59

40-13 65 40 80 360 112 140 50 14 100 70 210 160 14 100 14 267 24 50 27 8 30

40-16 65 40 80 360 132 160 50 14 100 70 240 190 14 100 14 267 24 50 27 8 36

40-20 65 40 100 360 160 180 50 14 100 70 265 212 14 110 14 267 24 50 27 8 44

40-26 65 40 100 360 180 225 65 14 125 95 320 250 14 110 14 267 24 50 27 8 61

40-32 65 40 125 470 200 250 65 14 125 95 345 280 14 110 14 342 32 80 35 10 95.8

50-13 65 50 100 360 132 160 50 14 100 70 240 190 14 100 14 267 24 50 27 8 34

50-16 65 50 100 360 160 180 50 14 100 70 265 212 14 110 14 267 24 50 27 8 38

50-20 65 50 100 360 160 200 50 14 100 70 265 212 14 110 14 267 24 50 27 8 46

50-26 65 50 100 360 180 225 65 14 125 95 320 250 14 110 14 267 24 50 27 8 63

50-32 65 50 125 470 225 280 65 16 125 95 345 280 14 110 14 342 32 80 35 10 101

65/13 80 65 100 360 160 180 65 14 125 95 280 212 14 110 14 267 24 50 27 8 39

65-16 80 65 100 360 160 200 65 14 125 95 280 212 14 110 14 267 24 50 27 8 43

65-20 80 65 100 360 180 225 65 14 125 95 320 250 14 110 14 267 24 50 27 8 52

65-26 80 65 100 470 200 250 80 16 160 120 360 280 17.5 110 14 342 32 80 35 10 81

65-32 80 65 125 470 225 280 80 16 160 120 400 315 17.5 110 14 342 32 80 35 10 110

80-16 100 80 125 360 180 225 65 14 125 95 320 250 14 110 14 267 24 50 27 8 54

80-20 100 80 125 470 180 250 65 14 125 95 345 280 14 110 14 342 32 80 35 10 70

80-26 100 80 125 470 200 280 80 16 160 120 400 315 17.5 110 14 342 32 80 35 10 91

80-32 100 80 125 470 250 315 80 16 160 120 400 315 17.5 110 14 342 32 80 35 10 120

80-40 100 80 125 530 280 355 85 16 160 120 440 340 17.5 110 17.5 368 42 110 45 12 161

100-16 125 100 125 470 200 250 60 16 160 120 360 280 17.5 110 17.5 342 32 80 35 10 71

100-20 125 100 125 470 200 280 60 16 160 120 360 280 17.5 110 17.5 342 32 80 35 10 85

100-26 125 100 140 470 225 280 80 16 160 120 400 315 17.5 110 17.5 342 32 80 35 10 106

100-32 125 100 140 470 250 315 80 16 160 120 400 315 17.5 110 17.5 342 32 80 35 10 134

100-40 125 100 140 530 280 355 100 18 200 150 500 400 23 110 23 370 42 110 45 12 174

125-20 150 125 140 470 250 315 80 16 160 120 400 315 17.5 110 17.5 342 32 80 35 10 106

125-26 150 125 140 470 250 355 80 16 160 120 400 315 17.5 110 17.5 342 32 80 35 10 115

125-32 150 125 140 530 280 355 100 18 200 150 500 400 23 110 23 370 42 110 45 12 163

125-40 150 125 140 530 315 400 100 18 200 150 500 400 23 110 23 370 42 110 45 12 181

150-20 200 150 160 495 280 400 100 20 200 150 550 450 23 110 23 367 32 80 35 10 156

150-26 200 150 160 530 250 355 100 18 200 150 450 350 23 110 23 370 42 110 45 12 148

150-32 200 150 160 530 280 400 100 18 200 150 550 450 23 110 23 370 42 110 45 12 170

150-40 200 150 160 530 315 450 100 18 200 150 550 450 23 110 23 370 42 110 45 12 209

150-50 200 150 160 752 400 490 130 30 255 200 605 500 23 180 23 565 55 100 59 16 350

200-32 250 200 225 670 315 435 100 30 200 150 550 450 22 110 14 518 48 110 51.5 14 280

200-40 250 200 225 670 315 450 100 30 200 150 550 450 24 110 14 518 48 110 51.5 14 300

200-50 250 200 225 794 400 550 130 30 250 200 605 500 23 180 23 499 60 110 64 18 350

250-32 300 250 250 670 400 500 100 30 270 180 500 400 28 110 14 512 48 110 51.5 14 308

250-40 300 250 250 670 450 505 125 30 270 210 600 500 23 110 14 512 48 110 51.5 14 337

250-50 300 250 250 806 450 650 130 30 270 200 760 690 28 200 23 583 80 140 84.5 20 408

( Dimension in mm )

7

The following and many other enterprises reply on the experience know how and solution of Ritz.

Zufriedene Kunden sagen mehr als tausend Worte.

Satisfied customers are worth a thousand words.

RITZ Pumpenfabrik GmbH & Co. KG | PO Box 17 80 | 73507 Schwaebisch Gmuend | GermanyTelephone +49 (0) 71 71 / 60 90 | Telefax +49 (0) 71 71 / 60 92 87 | [email protected] | www.ritz.de

Asia Pacific Office: Ritz Pumps Pte Ltd | 25 International Business Park | #04-65 German Centre | Singapore 609916Telephone (65) 6562 8666 | Fax (65) 6562 8668 | Email [email protected]

The manufacturer reserves the rights to make changes without prior notice.

Keppel Seghers Engineering (S)

Pte LtdSingapore

PUB Water Authority Singapore

Sembcorp Industries (S)

Pte LtdSingapore

San Miguel CorporationPhilippines

Salcon Boustead (S) Pte LtdSingapore

JBA LabuanWater Authority

Malaysia

Dayen Environment Limited (S)Singapore

M + W Group (S) Pte Ltd Singapore

Documents

Normpumpen nach DIN EN 733 einschl NORMA J ( ) Standard ... Suction Centrifugal Pump.pdf · Normpumpen nach DIN EN 733 einschl . Standard horizontal pumps to DIN EN 733. Norma J (