Norclean Industrial Vaccums - Environmental Cleanenvironmentalcleanair.com/pdf_file/vacuum/spares1A.pdf · NORCLEAN PART LIST 2007 Environmental Clean Air Company Norclean Industrial

NORCLEAN PART LIST 2007

Environmental Clean Air Company

Norclean Industrial Vaccums

1 of 30

Abbreviations used in product lists

A2 = AISI304A4 = AISI316A = Area, in sq.m.Qv = Airflow in Nm³/hrB = Width, in mm.D = Diameter, in mm.Di = Inside diameter, in mm.Fc = FiltercategoryHp = Height of part when fitted to other parts, in mm.Ht = Height total, in mm.L = Length, in mm.Ma = MaterialMin = MinuteSec = SecondStd = Standardp = Vacuum in mm watercolumn (WC)l = litresWt = Weight, in kilos

All figures given in brackets (xxxxxxx)refer to spare parts for above article.

Delivery groups (Dg):Group A : Articles with normal delivery time.Group B : Articles with delivery time on request.

Additional info:Following parts can be supplied with the vacuum unitsby adding the letters specified (e.g. 0102030WZ):

NB!All models in the system 50 series can be used with other ejector type power heads in the system 50 groups.

NB!All models in the system 200 series can be used with other ejector type power heads in the system 200 groups.

NB!All models in the system 50 series can be used with other electric power heads in the system 50 groups.

Group A : Articles with normal delivery time.Group B : Articles with delivery time on request.

V - Branch pipe with 1 quick coupling installed on the vacuum unit (0801030).- E.g. 0101020V

W - Branch pipe with 2 quick couplings installed on the vacuum unit (0801031).- E.g. 0101020W

Y - Centralized air discharge.- E.g. 0101020Y

Z - Black conductive silencing hood parts for ex-proofing.- E.g. 0101020Z

Any combination of the above.- E.g. 0101020WYZ

NE22

NE32NE42

NE52

NE74

NEL2R

NEL3R

NEL3RT

NE52

NE56

NE64

NE66 NE74

NE76

NE86

NE96

PART LIST 2007 01.01.2007

Code no. Dg Descripton Weight

PART LIST 2007 01.01.2007

2 of 30

PART LIST 2007 01.01.2007


11830 42910000 A Fb100 - Cyclon System 50, d51.Wt= 9

42910100 A Fb101 - Cyclon System 50, d63.Wt= 10



42910800 A Fb108 - Cyclon System 200, d76.The cyclone should be used whenever there is a constant suction flow to ensure maximum separation. The cyclones are recommedned for suction of dry dust and granulates. Materials can be recovered in plastic bags if required. Typical areas of applicaion for this product are suction of dust and shavings from grinding, cutting machines etc. For suction of powder, we recommend to use a gulper head.

Wt= 18

11961 42915000 A Fb150 - Coarse grain separator, f/wet mat. syst. 50, d51.Wt= 5,1

42915500 A Fb155 - Coarse grain separator, f/wet mat. syst. 200, d51.Wt= 9,4

42915600 A Fb156 - Coarse grain separator, f/wet mat. syst. 200, d63.Wt= 9,5

42915700 A Fb157 - Coarse grain separator, f/wet mat. syst. 200, d76.Suitable for separation of liquids, wet or dry materials as well as coarse grain, not dusty. The cup in the coarse grain separator has rim for the float ball.

Wt= 10,3

42916000 A Fb160 - Coarse grain separator, f/dry mat. syst. 50, d51.Wt= 5

42916500 A Fb165 - Coarse grain separator, f/dry mat. syst. 200, d51.Wt= 9,3

42916600 A Fb166 - Coarse grain separator, f/dry mat. syst. 200, d63.Wt= 9,4

42916700 A Fb167 - Coarse grain separator, f/dry mat. syst. 200, d76.For separation of dry, dusty and hazardouz materials. The cup in the coarse grain separator has no rim for the float ball.

Wt= 10,2

3 of 30

PART LIST 2007 01.01.2007


Fb300 42930000 A Fb300 - Complete w/floor suction head, d=63 Wi=500.Wt= 4,1

42930100 A Fb301 - Complete w/floor suction head, d=63 Wi=600.Rugged 63 mm inside diameter suction equipment designed for collection of abrasive materials. Suction pipe and pipe bend are made of aluminium, swivel is made of stainless steel. A replaceable rubber plate is provided in the suction pipe bend to resist wear.

Wt= 4,3

Fb320 42932000 A Fb320 - Complete w/floor suction head, d=51 Wi=400.Wt= 2,7

42932100 A Fb321 - Complete w/floor suction head, d=51 Wi=500.Wt= 2,8

42932200 A Fb322 - Complete w/floor suction head, d=51 Wi=600.Wt= 5

42932300 A Fb323 - Complete w/floor suction head, d=51 Wi=400.Wt= 6

42932500 A Fb325 - Complete w/wet suction head, d=51 Wi=400.Wt= 6

42932800 A Fb328 - Complete w/brush suction head, d=51 Wi=400.Suction equipment designed for heavy industrial cleaning in 51 mm inside diameter. Suction pipe is made of PEHD-el. The pipe bend is antistatic and made of the material Polyamid 12 for maximum life and wearability. Brushes and rubber strips are replaceable.

Wt= 3,1

Fb342 42934200 A Fb342 - Complete w/floor suction head, d=51 Wi=450.Light and easy to handle suction equipment in 51 mm inside diameter. Suitable for industrial or institutional work. Suction pipe is made of PEHD-el, pipe bend is antistatic and made of the material Polyamid 12 for maximum life and wearability. The floor suction head is equipped with interchangeable brushes and rubber strips to provide flexibility and performance.

Wt= 2

11371 42935000 A Fb350 - Complete w/floor suction head, d=38 Wi=370.Light and easy to handle suction equipment in 38mm inside diameter. Pipe bend is made of stainless steel in three parts, with adaptor for hose. The floor suction head is equipped with interchangeable brushes and rubber strips to provide flexibility and performance.

Wt= 1,8

4 of 30

PART LIST 2007 01.01.2007


12390 0101010 A Ejectorcleaner syst. 50, (NE22).(43020001) p=2100, Qv=306, D=402, Hp=400 Wt= 13,6

0101020 A Ejectorcleaner syst. 50, (NE32).(43022001) p=3100, Qv=342, D=402, Hp=400 Wt= 13,6




2 Suction inlet can be supplied on request, (D=51).

5 Spare parts: See drawing Gd0101-01.dwg.

12389 0102010 A Ejectorcleaner syst. 200, (NE54).

(43030001) p=5200, Qv=342, D=602, Hp=400 Wt= 18,8


0102030 A Ejectorcleaner syst. 200, (NE64).

(43034001) p=6800, Qv=330, D=602, Hp=400 Wt= 18,8



(43038001) p=7800, Qv=318, D=602, Hp=400 Wt= 18,8



(43042001) p=7300, Qv=540, D=602, Hp=400 Wt= 18,8

0102080 B Ejectorcleaner syst. 200, (NE96).(43044001) p=6800, Qv=660, D=602, Hp=400 Wt= 18,8

132 Suction inlet can be supplied on request, diam. shall be specified, (D=51, D=63, D=76).

5 Spare parts: See drawing Gd0101-01.dwg.

134 Ejectorcleaners are compressed air powered.135 All technical data in pamphlets are given by dynamic compressed

air pressure of 7bar.

11835 0103010 A Drum filler, w/suction inlet D=38, (NE14)

(43010001) 143 Fits in a std. 2" BSP bung-hole. Wt= 2,9p=2300, Qv=136, L=440, Hp=370(1701030, 1701032, 1704024)

15205 0103010A B Drum filler on lid, w/suction inlet D=38, (NE14)(43010002) 143 Fits in a std. 2" BSP bung-hole. Wt= 3

p=2300, Qv=136, L=440, Hp=370(1701030, 1701032, 1704024)

5 of 30

PART LIST 2007 01.01.2007


11836 0201011 A Electric cleaner syst. 50, (NEL2R).(43052001) 144 radio-interference suppr. Wt= 13,9

1,6 kW, 230 V, 50/60 Hz. IP 44.

3 Approved:

0201110 A Electric cleaner syst. 50, (NEL2).(43052002) 1,6 kW, 110/120V, 50/60 Hz. IP 44. Wt= 13,9

4 Not CE-standard.

0202032 A Electric cleaner syst. 50, (NEL3R).(43054100) 144 radio-interference suppr. Wt= 15,9

2,4 kW, 230 V, 50/60 Hz. IP 44.

3 Approved:

0202042 A Electric cleaner syst. 50, (NEL3RT).(43054200) 145 radio-interference suppr., cooling-air filter and thermo-switch 75°C. Wt= 16,8

2,4 kW, 230 V, 50/60 Hz. IP 44.

3 Approved:

0202110 A Electric cleaner syst. 50, (NEL3).(43054300) 2,4 kW, 110/120 V, 50/60 Hz. IP 44. Wt= 15,8

4 Not CE-standard.

D=410, Hp=230 5 Spare parts: See drawing Gd0201-01.dwg.

11808 0210001 A Side channel blower, w/thermo-switch, three-phase.

(43060001) 3 kW, 230/400 V, 50 Hz. Wt= 40L=422 Hp=435 B=395

0210002 A Side channel blower, w/thermo-switch, three-phase.(43060100) 5,5 kW, 230/400 V, 50 Hz. Wt= 71

L=515 Hp=530 B=480

0210003 A Side channel blower, w/thermo-switch, three-phase.(43060200) 5,5 kW, 400/690 V, 50 Hz. Wt= 71

L=515 Hp=530 B=480

0210004 A Side channel blower, w/thermo-switch, three-phase.(43060300) 11 kW, 230/400 V, 50 Hz. Wt= 128

L=626 Hp=690 B=580

0210005 A Side channel blower, w/thermo-switch, three-phase.(43060400) 11 kW, 400/690 V, 50 Hz. Wt= 128

L=626 Hp=690 B=580

138 Safety valve; see code nos. 0803001, -002, -003.139 False air valve; see code no. 0803013.

140 Suction inlets; see code nos. 1017040, -041, -042.

141 Starters; see code nos. 0804001, -002, -003, -004, -005, -006.

6 of 30

PART LIST 2007 01.01.2007


11837 0501001 A Filter bag syst. 50, disposable, pack of 5 pcs. (43110001) A=0,5 Wt= 0,6

123 Filter material: Multilayer filter paper.6 Max. temp. 70°C.

11839 0501011 A Filter bag syst. 50.

(43110100) A=0,35 Wt= 0,2

0501012 A Filter bag syst. 50, Antistatic.(43110200) A=0,35 Wt= 0,2

0501021 A Filter bag syst. 200.

(43110300) A=0,59 Wt= 0,4

0501022 A Filter bag syst. 200, Antistatic.(43110400) A=0,59 Wt= 0,4

124 Filter material: Teflon coated polyester.6 Max. temp. 120°C.

11840 0502009 A Filtercartrigde syst. 50/200, without outside perforated steel plate.

(43120100) A=2,38 D=264 Ht=220 Fc=M(99,97%) Wt= 1,7125 Filter material: Cellulose paper.6 Max. temp. 70°C.

0502022 A Filtercartrigde syst. 50/200, without outside perforated steel plate.(43120200) A=1,56 D=264 Ht=220 Fc=H(99,997%) HEPA. Wt= 2

126 Filter material: Cellulose paper, glass micro-fiber paper w/acrylic binder.6 Max. temp. 70°C.

0502031 A Filtercartridge syst. 50/200, without outside perforated steel plate, washable.(43120300) A=2,38 D=264 Ht=220 Fc=M(99,95%) Wt= 2

127 Filter material: Polyester.6 Max. temp. 120°C.

106 Short period: 140°C.

11841 0502010 A Filtercartridge syst. 50/200 with perforated steel plate.(43130001) A=2,38 D=264 Ht=220 Fc=M(99,97%) Wt= 2

0502011 A Filtercartridge syst. 50/200 with perforated steel plate, without bottom.(43130100) A=2,38 D=264 Ht=220 Fc=M(99,97%) Wt= 1,8

0502015 A Filtercartridge syst. 50/200 with perforated steel plate.

(43130200) A=5,4 D=264 Ht=470 Fc=M(99,97%) Wt= 2,7

0502016 A Filtercartridge syst. 50/200 with perforated steel plate.(43130300) A=6,9 D=264 Ht=600 Fc=M(99,97%) Wt= 3,2


(43130400) A=10,0 D=264 Ht=870 Fc=M(99,97%) Wt= 5,3

125 Filter material: Cellulose paper.6 Max. temp. 70°C.

0502020 A Filtercartridge syst. 50/200 with perforated steel plate.(43130500) A=1,56 D=264 Ht=220 Fc=H(99,997%) HEPA. Wt= 2,1

0502020B B Filtercartridge syst. 50/200 with perforated steel plate.(43130502) A=1,56 D=264 Ht=220 Fc=H(99,997%) HEPA, A4 Wt= 2,8



(43130800) A=4,5 D=264 Ht=600 Fc=H(99,997%) HEPA. Wt= 3,8


41 Filter material: Cellulose paper, glass micro-fiber paper w/acrylic binder.6 Max. temp. 70°C.

7 of 30

PART LIST 2007 01.01.2007


17000 0502040 A Filter syst. 200 w/compr. air cleaning of filtercartrigde.(43150001) D=602 Ht=1195 Hp=750 Wt= 55

36 To be used with code no.: 0502017B/0502027B

0502041 A Filter syst. 200 w/compr. air cleaning of filtercartrigde.(43150100) D=602 Ht=920 Hp=595 Wt= 50

36 To be used with code no.: 0502016B/0502026B

12388 0502051 A Clamp for filtercartrigde with Ht=220(43140001) Wt= 0,10502051B B Clamp for filtercartrigde with Ht=470(43140002) Wt= 0,10502051C B Clamp for filtercartrigde with Ht=870(43140003) Wt= 0,10502051D B Clamp for filtercartrigde with Ht=220, Ma=El.Zn.(43140004) Wt= 0,50502051E B Clamp for filtercartrigde with Ht=600(43140005) Wt= 0,60502051F B Clamp for filtercartrigde with Ht=220, A4

(43140006) Wt= 0,50502051H B Clamp for filtercartrigde with Ht=220/470(43140008) 146 With filter under and above. Wt= 0,7

11843 0502100 A Filter, cooling-air.(43120400) 36 To be used with code no.: 0202042. Wt= 0,8

D=338 Ht=42

13007 0502140 A Filtercandle w/nut/o-ring, L=300(43170001) A=0,045 D=47 Ht=335 Fc=M(98,54%) Wt= 0,2

59 Filter material: PPF Polyprophylene.6 Max. temp. 110°C.

(1701013, 1706040, 1708005)

0502141 A Filtercandle w/nut/o-ring, L=400(43170002) A=0,06 D=47 Ht=435 Fc=M(98,54%) Wt= 0,3


(1701013, 1706041, 1708005)

0502142 A Filtercandle w/nut/o-ring, L=500(43170003) A=0,075 D=47 Ht=535 Fc=M(98,54%) Wt= 0,3


(1701013, 1706042, 1708005)

8 of 30

PART LIST 2007 01.01.2007


11844 0503012 A Filter syst. 50 w/compr. air cleaning (NVF1,6).(43160001) 59 Filter material: PPF Polyprophylene. Wt= 23

6 Max. temp. 110°C.(1701004, 1701013, 1706040, 1708005, 1709020, 1799012, 1799031)

119 Max. recommended filter loading: 480 Nm³/t.118 Number of filter candles: 36, L=300

A=1,6 D=402 Ht=500 Hp=415 Fc=U(98,54%)

11845 0503025 A Filter syst. 200 w/compr. air cleaning (NVF3,15).(43162001) 59 Filter material: PPF Polyprophylene. Wt= 39,7

6 Max. temp. 110°C.(1701005, 1701013, 1706040, 1708005, 1709020, 1799012, 1799033)


A=3,15 D=602 Ht=500 Hp=260 Fc=U(98,54%)

11846 0503035 A Filter syst. 200 w/compr. air cleaning (NVF5,25).(43164001) 59 Filter material: PPF Polyprophylene. Wt= 53,9

6 Max. temp. 110°C.(1701005, 1701013, 1706042, 1708005, 1709020, 1799012, 1799033)


A=5,25 D=602 Ht=705 Hp=470 Fc=U(98,54%)

11797 0503204 A Cleaning lid.(43190001) 26 Suction outlet: D=100 Wt= 15,5

D=602 Ht=153 Hp=143 117 To be used in combination with Cb-models.

(1701051, 1715010, 1715064, 1715066, 1716053, 1799056)

9 of 30

PART LIST 2007 01.01.2007


11847 0801010 A Control system for ejectorcleaners, pneumatic, remote.(43210001) 148 Control hose not included. Wt= 0,8

(1715025)

0801011 A Hose for use with control system for ejectorcleaners(43211001) 149 Length to be stated in order. Wt= 0,2

36 To be used with code no.: 0801010

11958 0801020 A Control system for ejectorcleaners, pneumatic. (43212001) 11 Suction periods (min): 0 - 5 Wt= 4,7

12 Discharge periods (sec): 0 - 30(0801011, 1709005, 1715030, 1715031, 1715032, 1716040, 1716041)

0801025 A Control system for pneumatic valves.(43213001) 36 To be used with code no.: Wt= 9,5

0261001, 0261002, 0262001, 0262002, 0265011, 0265012, 0270011, 0270012, 0275001, 0275002(1716053)

11848 0801030 A Branch pipe 1" BSP w/1 quick-coupling, for ejectorcleaners.(43214001) 150 For control of NVF-filter cleaning or discharge valve. Wt= 0,5

0801031 A Branch-pipe 1" BSP w/2 quick-couplings, for ejectorcleaners.(43214100) 151 For control of NVF-filter cleaning and discharge valve. Wt= 0,9

11849 0802010 A Control system for ejectorcleaners, 230V, 50Hz.

(43220001) 11 Suction periods (min): 0 - 0,5 Wt= 4,812 Discharge periods (sec): 3 - 60

L=156 Ht=255 B=200 36 To be used with code no.: 0101010-0102030, 0102040-0102060

(1716001, 1716010, 1716030, 1716059, 1716061)

0802011 A Control system for ejectorcleaners, 230V, 50Hz.(43222001) 11 Suction periods (min): 0 - 0,5 Wt= 6,9

12 Discharge periods (sec): 3 - 60L=165 Ht=255 B=200

36 To be used with code no.: 0102070, 0102080(1716001, 1716010, 1716030, 1716064, 1716061)

120 Other voltage can be supplied on request.121 Mounting plate for silo syst. 200 code nos. 0920081.

10 of 30

PART LIST 2007 01.01.2007


11805 0803001 A Valve, Safety/False air(43250001) 7 for code no. 0210001. Wt= 3

0803002 A Valve, Safety/False air(43250101) 7 for code no. 0210002, -003. Wt= 3,5

0803003 A Valve, Safety/False air

(43250201) 7 for code no. 0210004, -005. Wt= 5,7

11947 0803013 A Valve, False air(43250301) D=76. Wt= 5,3

11956 0804001 A Starter, direct, 230V,(43230001) 7 for code no. 0210001. Wt= 0,6

0804002 A Starter, direct, 400V,

(43231001) 7 for code no. 0210001. Wt= 0,6

0804003 A Starter, direct, 230V,(43232001) 7 for code no. 0210002. Wt= 0,6

0804004 A Starter, direct, 400V,

(43233001) 7 for code no. 0210003. Wt= 0,6

0804005 A Starter, Y/D, 230V,(43234001) 7 for code no. 0210004. Wt= 3,3

0804006 A Starter, Y/D, 400V,(43235001) 7 for code no. 0210005. Wt= 3,3

16542 0809001 A Earthingkit(43291001) Wt= 0,1

11 of 30

PART LIST 2007 01.01.2007


14991 0901011 A Container syst. 50. (43320001) 32 Volume: 67 l. Wt= 6,5

D=390 Ht=630 (1799031)

0901022 A Container syst. 50, w/inlet-pipe holder D=51.(43322001) 31 Volume below suction inlet: 40 l. Wt= 6,6

D=390 Ht=630 (1799003, 1799031)

0901023 A For container combinations.(43324001) 8 Other data as for 0901022.

11852 0901061 A Container syst. 50, w/bottom drain valve 2" BSP.

(43326001) 16 and inlet-pipe holder D=51. Wt= 8,431 Volume below suction inlet: 40 l.

D=390 Ht=630 (1709003, 1799003, 1799031)

11853 0901065 A Container syst. 50 w/pump and sieve (230V AC).(43328001) 152 w/bottom drain valve 1 ¼" BSP and inlet-pipe holder D=51. Wt= 20

D=390 Ht=630 (1020033, 1703066, 1708008, 1709004, 1709026, 1711001,1711006, 1716008, 1799031)

0901070 A Container syst. 50 w/pump and sieve (110V AC).(43328101) 152 w/bottom drain valve 1 ¼" BSP and inlet-pipe holder D=51. Wt= 20,5

D=390 Ht=630 (1020033, 1703066, 1708008, 1709004, 1709026, 1711005,1711006, 1716008, 1799031)

11855 0901122 A Container syst. 50, A4, w/inlet-pipe holder D=51.(43348001) 31 Volume below suction inlet: 40 l Wt= 6,7

D=390 Ht=630 (1799003, 1799031)

0901123 A For container combinations.(43350001) 8 Other data as for 0901122. Wt= 10

11856 0901161 A Container syst. 50, A4, w/bottom drain valve 2" BSP.

(43352001) 16 and inlet-pipe holder D=51. Wt= 8,431 Volume below suction inlet: 40 l

D=390 Ht=630 (1709003, 1799003, 1799031)

11857 0901201 A Container syst. 50, for lever.(43330001) 32 Volume: 67 l. Wt= 9,8

D=390 Ht=630

0901202 A Container syst. 50, w/wheels, for lever.(43330002) 32 Volume: 67 l. Wt= 10,8

D=390 Ht=700

12 of 30

PART LIST 2007 01.01.2007


11800 0901301 A Container syst. 50, w/excentric fasteners. (43332001) 32 Volume: 47 l. Wt= 5,3

D=390 Ht=450 (1799021, 1799031)

0901302 A Container syst. 50, w/excentric fasteners. (43334001) 32 Volume: 67 l. Wt= 7

D=390 Ht=630 (1799021, 1799031)

11858 0902010 A Container syst. 200.

(43360001) 32 Volume: 220 l. Wt= 20,7D=590 Ht=875 (1799012, 1799033)

11859 0902021 A Container syst. 200, w/inlet-pipe holder D=51.(43362001) 31 Volume below suction inlet: 160 l. Wt= 20,9

D=590 Ht=875 (1799003, 1799012, 1799033)

11860 0902041 A Container syst. 200, w/inlet-pipe holder D=51.(43364001) 31 Volume below suction inlet: 115 l. Wt= 20,7

D=590 Ht=875 (1799101, 1799012, 1799033)

18 Suction inlet pipes have to be chosen according to hose size to be used. Code no.:

22 1016013 (D=76-76), 1016022 (D=76-51), 1016023 (D=76-63)

11861 0902061 A Container syst. 200, w/bottom drain valve 2" BSP.(43366001) 16 and inlet-pipe holder D=51. Wt= 22,7

31 Volume below suction inlet: 160 l.D=590 Ht=875 (1709003, 1799003, 1799012, 1799033)

0903010 0903010 A Tank S200, 950l(43391001) D=1000 Wt= 249

32 Volume: 950 l.54 Length x Width x Height (mm): 1500x1000x1100

13 of 30

PART LIST 2007 01.01.2007


11862 0905011 A Silo syst. 50, w/brackets for legs, w/excentric conus, (43411001) 154 fasteners and suction inlet D=51. Wt= 22,4

31 Volume below suction inlet: 68 l.D=390 Ht=910 (1020033, 1708006, 1799012)

20 Abrasive plate code no. 0920091.114 In combination with filter basket code no. 1002010115 and filter bag code no. 0501011116 use code no. 0905011N

11863 0905021 A Silo syst. 50, for wall mounting w/excentric conus, (43412001) 154 fasteners and suction inlet D=51. Wt= 23,6

31 Volume below suction inlet: 68 l.D=390 Ht=910 (1020033, 1799012)

20 Abrasive plate code no. 0920091.114 In combination with filter basket code no. 1002010115 and filter bag code no. 0501011116 use code no. 0905021N

12384 0905025 A Silo syst. 50 w/excentric fasteners.

(43414001) 32 Volume: 28 l. Wt= 23,6D=390 Ht=385 (1799021)

11811 0905031 A Silo syst. 50, for wall mounting and container, (43420001) 113 w/fasteners and inlet-pipe holder D=51. Wt= 12,8

D=390 Ht=330 (1020033, 1701050, 1799012)

20 Abrasive plate code no. 0920091A.42 For floor mounting use frame code no. 0920015.

15274 0905040 A Silo syst 50, w/reverse air cleaning, manual(43424001) 113 w/fasteners and inlet-pipe holder D=51. Wt= 20,3

D=390 Ht=640 (1020033, 1701050, 1799012)

15273 0905042 A Silo syst 50, w/reverse air cleaning, automatic, (43425001) 113 w/fasteners and inlet-pipe holder D=51. Wt= 23,5

D=390 Ht=575 (1020033, 1701050, 1703100, 1701017, 1799012)

12391 0905060 A Silo syst. 50 for wall mounting w/excentric fasteners. (43417001) 155 Pneumatic discharge D=384. Wt= 40,2

32 Volume: 104 l.D=390 Ht=1000 (1701054, 1715027, 1715067, 1799021)

0906060 A Silo syst. 200 for wall mounting w/excentric fasteners.(43458001) 155 Pneumatic discharge D=584. Wt= 25

32 Volume: 246 l.D=590 Ht=1000 (1701054, 1715027, 1715067, 1799021)

14 of 30

PART LIST 2007 01.01.2007


11864 0906010 A Silo syst. 200, for legs/triangular frame,(43440001) 113 w/fasteners and inlet-pipe holder D=76. Wt= 41

31 Volume below suction inlet: 146 l.D=591 Ht=1115 (1708006, 1799101, 1799012)

20 Abrasive plate code no. 0920090.18 Suction inlet pipes have to be chosen according to hose size to be

used. Code no.:22 1016013 (D=76-76), 1016022 (D=76-51), 1016023 (D=76-63)

0906011 A Silo syst. 200, for legs/triangular frame,(43441001) 30 w/fasteners. Wt= 40,3

32 Volume: 220 l.D=591 Ht=1115 (1708006, 1799012)

11865 0906020 A Silo syst. 200, for wall/frame mounting,(43442001) 113 w/fasteners and inlet-pipe holder D=76. Wt= 45,2

31 Volume below suction inlet: 146 l.D=591 Ht=1115 (1799101, 1799012)


used. Code no.:22 1016013 (D=76-76), 1016022 (D=76-51), 1016023 (D=76-63)

0906021 A Silo syst. 200, for wall/frame mounting,(43443001) 30 w/fasteners. Wt= 44,8

32 Volume: 220 l.D=591 Ht=1115 (1799012)

0906022 A Silo syst. 200, for wall/frame mounting,(43444001) 33 w/excentric fasteners. Wt= 45,8

32 Volume: 220 l.D=591 Ht=1115

36 To be used with code no.: 1010160(1799021)

11866 0906030 A Silo syst. 200, for legs/triangular frame,(43450001) 113 w/fasteners and inlet-pipe holder D=76. Wt= 65

34 Pneumatic discharge valve D=320.31 Volume below suction inlet: 146 l.

D=591 Ht=1115 (1701054, 1708006, 1715027, 1715067, 1799012, 1799101)

0906031 A Silo syst. 200, for wall/frame mounting,(43452001) 30 w/fasteners. Wt= 68

31 Volume below suction inlet: 146 l.34 Pneumatic discharge valve D=320.

D=591 Ht=1115 (1701054, 1715027, 1715067, 1799012, 1799101)


used. Code no.:22 1016013 (D=76-76), 1016022 (D=76-51), 1016023 (D=76-63)

12387 0906045 A Silo syst. 200, continuously discharging, w/slots for fixing to silo.

(43485001) 157 Control box with adjustable timer for setting of discharge periods(230 Wt= 42,2

158 For use with silos syst. 200/300.D=602 Ht=750 Hp=490 (1701006, 1701051, 1708013, 1715026, 1715062, 1716001, 1716010,1716030, 1716052)

36 To be used with code no.: 0920220.

15 of 30

PART LIST 2007 01.01.2007


11809 0906052 A Silo syst. 200, for wall/frame mounting,(43461001) 113 w/fasteners and inlet-pipe holder D=76. Wt= 29

D=591 Ht=620 (1701050, 1799101, 1799012)

42 For floor mounting use frame code no. 0920016.20 Abrasive plate code no. 0920090B.18 Suction inlet pipes have to be chosen according to hose size to be

used. Code no.:22 1016013 (D=76-76), 1016022 (D=76-51), 1016023 (D=76-63)

11868 0907010 A Silo syst. 300 for frame and legs.(43480001) 160 Equipped with bolts for fixing of continuously discharging silo or pres Wt= 100

32 Volume: 500 l.D=800/592 Ht=1350 (1708011, 1708013)

0907020 A Silo syst. 300 for wall mounting. (43481001) 8 Other data as for 0907010. Wt= 102,5

D=800/592 Ht=1350 (1708011, 1708013)

11943 0911010 A Silo syst. 200, mobile, for forklift handling,(43470001) 113 w/fasteners and inlet-pipe holder d=76. Wt= 81,3

31 Volume below suction inlet: 146 l.21 Discharge height: 150 mm.38 Wheel, D=200 mm

L=1020 Ht=1435 B=880(1707007, 1707008, 1799101, 1799012)


used. Code no.:22 1016013 (D=76-76), 1016022 (D=76-51), 1016023 (D=76-63)

11944 0911030 A Silo syst. 200, mobile, for forklift handling,(43401200) 113 w/fasteners and inlet-pipe holder d=76. Wt= 90,6

31 Volume below suction inlet: 146 l.21 Discharge height: 500 mm.37 Wheel, airfilled, D=200 mm

L=1020 Ht=1740 B=890(1707009, 1707010, 1799101, 1799012)


used. Code no.:22 1016013 (D=76-76), 1016022 (D=76-51), 1016023 (D=76-63)

11954 0911060 A Silo syst. 200, mobile, w/2 silos.(43476001) L=1630 Ht=1440 B=880 Wt= 122,5

21 Discharge height: 150 mm.38 Wheel, D=200 mm

(1707007, 1707008, 1799012)

11871 0920001 A Fasteners(43670001) 162 for adaptors and containers syst. 50/200. Wt= 0,2

112 Set - 2 pieces.

16 of 30

PART LIST 2007 01.01.2007


11794 0920011 A Frame syst. 50, double, forklift handling.(43740001) L=1050 Ht=1760 B=875 Wt= 47,5

0920012 A Frame syst. 200, double, forklift handling.(43751001) L=1360 Ht=2375 B=1000 Wt= 88

11810 0920015 A Frame syst. 50, single, forklift handling.(43741001) L=520 Ht=1120 B=380 Wt= 23,9


0920016 A Frame syst. 200, single, forklift handling.(43750001) L=650 Ht=1250 B=650 Wt= 35


11872 0920020 A Frame syst. 200, triangular, for legs.

(43752001) 163 Distance between legs: 1106 mm. Wt= 1136 To be used with code no.: 0920030, -040, -050.7 for code no. 0906010, -011, -030.

(1708006)

11807 0920025 A Frame syst. 300, for silo.

(43760001) 43 Leg length: 2500 mm. Wt= 118L=1580 Ht=2500 B=1580

11873 0920030 A Leg, bent, w/holes for height adjustment.

(43755001) 43 Leg length: 1500 mm. Wt= 5,1

0920040 A Leg, straight, w/holes for height adjustment.(43756001) 43 Leg length: 1500 mm. Wt= 4,9

0920050 A Leg, straight, w/holes for height adjustment.

(43756100) 43 Leg length: 2200 mm. Wt= 7,136 To be used with code no.: 0920070.

D=48

11875 0920070 A Stay-tube w/screws and nuts. (43757001) D=27 L=1500 Wt= 2,1

111 Brackets must be used, 2 for each stay-tube,116 use code no. 0920080.

17 of 30

PART LIST 2007 01.01.2007


11946 0920081 A Mounting plate silo syst. 200.(43690001) 36 To be used with code no.: 0802010, -011. Wt= 0,5

L=250 B=220

11877 0920090 A Abrasion plate silo syst. 200.(43627001) L=800 Ht=300 Wt= 4,3

0920091 A Abrasion plate silo syst. 50.

(43625001) L=540 Ht=300 Wt= 3,1

11878 0920100 A Adaptor lid, reduction from syst. 200 to syst. 50, (43622300) 164 w/suction inlet D=51. Wt= 7

D=602 (1020033, 1701051)

11879 0920110 A Adaptor syst. 50, for cartridge filter.(43622001) D=402 Ht=390 Hp=265 Wt= 7,2

(1010250, 1701006, 1701050, 1799031)

11880 0920113 A Adaptor syst. 50, w/suction inlet D=51.

(43622200) D=402 Ht= 345 Wt= 4,8(1701009, 1799003, 1799031)

11881 0920130 A Sieve syst. 200 for collection of metal chips, w/suction inlet D=51.(43624101) 165 Mesh: D=3mm. Wt= 13,6

32 Volume: 36 l.D=602 Ht=630 (1020033, 1701051)

18 of 30

PART LIST 2007 01.01.2007


0920200 0920200 A Valve discharge, manual, inside diam. 150 mm.(43630001) D=225 L=510 Ht=175 Wt= 1,2

(1701007, 1701035, 1799057, 1799059)

0920210 A Valve, discharge, pneumatically operated, inside diam. 150 mm.(43630100) D=225 L=500 Ht=175 Wt= 1,5

(1701007, 1701035, 1715061, 1799059)

0920220 0920220 A Valve, discharge/non return, w/adj. counterweight, inside diam. 150 mm.(43630200) D=225 L=325 Ht=175 Wt= 1,2

(1701007, 1701035, 1799058, 1799059)

11884 0920230 A Valve, butterfly, manual, inside diam. 150 mm.

(43631001) D=233 Hp=45 Wt= 4,9(1701007)

11885 0920240 A Valve, pinch, pneumatically operated, inside diam. 60 mm.

(43632001) D=225 Ht=275 Wt= 15,2(1709010, 1709025)

0920241 A Valve, pinch, pneumatically operated, inside diam. 75 mm.(43632100) D=225 Ht=305 Wt= 18

(1709011, 1709025)

0920242 A Valve, pinch, pneumatically operated, inside diam. 95 mm.(43632200) D=225 Ht=340 Wt= 26,5

(1709012, 1709025)

110 w/pressure reducing valve and 2 m compressed air hose.6 Max. temp. 80°C.

11886 0920280 A Bag-holder for code 0920220, -230.

(43640001) D=400 Ht=70 Wt= 1(1701007, 1701040)

12385 0920290 A Bag-holder Big-bags, w/discharge valve. (43640200) L=800 Ht=200 B=600 D=350 Wt= 1,3

11887 0920300 A Level control for silos, containers etc.

(43251001) 166 (Mounting/adjustment: see mounting instruction). Wt= 1,514 Max. depth of sensor: 500 mm.

Ht=650 13 For use with lid system 50/200, code no. 3109039/3109038

(1716032)

0920301 A Cable for level control, code no. 0920300. (43251051) 149 Length to be stated in order. Wt= 0,1

15650 0920401 A Wallmounting bracket for 0905042.(43770001) 167 for frame 0920011, -015. Wt= 5

0920510 0920510 A Fluidizing kit f/silo(43692001) Wt= 4

19 of 30

ART LIST 2007 01.01.2007


11888 1001010 A Bag syst. 50, disposable.(43650001) 168 Pack of 5. Wt= 0,9

123 Filter material: Multilayer filter paper.Vol.=30 l. Ht=725 B=575

11889 1001020 A Bag syst. 50, plastic.

(43650100) 168 Pack of 10. Wt= 0,8Ht=1300 B=770

11890 1002010 A Basket syst. 50

(43660001) 44 for filter bag code no. 0501011 Wt= 1,245 for float ball code no. 1002040

D=370 Ht=275 (1708004)

11891 1002015 A Basket syst. 50(43660100) 44 for filter bag code no. 0501001, -011 Wt= 1,2

46 for filter cartridge code nos. 0502009, -010, 020, 022, -31D=365 Ht=295 (1708015)

11892 1002020 A Basket syst. 200(43660200) 44 for filter bag code no. 0501021 Wt= 2,1

45 for float ball code no. 1002040D=590 Ht=300 (1708004)

11893 1002040 A Float ball syst. 50/200. (43660300) 172 Material: PVC. Wt= 0,5

D=155

11894 1002090 A Accessory basket syst. 50

(43662001) 36 To be used with code no.: 1005011, -012, -021, -031. Wt= 3,1L=315 Ht=380 B=450

1002091 A Accessory basket syst. 50 (43662100) 36 To be used with code no.: 1005035 Wt= 2

L=175 Ht=250 B=450

11955 1002095 A Accessory basket for wall.

(43662200) L=460 Ht=510 B=215 Wt= 3,7

1002096 A Accessory basket for wall, w/hoserail.(43662300) L=500 Ht=1020 B=240 Wt= 6,1

20 of 30

PART LIST 2007 01.01.2007


11895 1005011 A Trolley syst. 50. (43720001) 38 Wheel, D=125, D=225. Wt= 13,5

L=860 Ht=1000 B=550 (1703063, 1703064, 1703068, 1707004, 1707011, 1799035, 1799066, 1799067)

1005012 A Trolley syst. 50, w/isolated handle.(43721001) 36 To be used with code no.: 0901065/-070. Wt= 14,7

8 Other data as for 1005011.(1703063, 1703064, 1703068, 1707004, 1707011, 1799039,1799066, 1799067)

11896 1005021 A Trolley syst. 50, tippable. (43722001) 38 Wheel, D=125, D=225. Wt= 12,5

L=860 Ht=1000 B=550 (1701061, 1703060, 1703061, 1703068, 1707004, 1707011, 1799006, 1799015, 1799035, 1799066, 1799067)

11945 1005025 A Trolley syst. 50, for silo.(43723001) 38 Wheel, D=125, D=300. Wt= 16,3

L=650 Ht=1250 B=620 (1707004, 1707013)

11897 1005031 A Trolley syst. 50, tippable for two containers. (43724001) 38 Wheel, D=125, D=225. Wt= 16,5

L=1480 Ht=1000 B=550 (1701061, 1703060, 1703061, 1703062, 1703067, 1707004, 1707011, 1799006, 1799015, 1799035, 1799066, 1799067)

11898 1005035 A Trolley syst.50, w/ frame for silo and container syst. 50.(43725001) 38 Wheel, D=200, D=300. Wt= 53

L=1100 Ht=1500 B=720 (1707007, 1707013, 1799006, 1799015, 1799036)

11899 1005040 A Trolley syst. 200, NT-4.(43730001) 38 Wheel, D=300mm. Wt= 16,4

L=1050 Ht=830 B=850 (1703050, 1707013)

11900 1005050 A Trolley syst. 200, tippable, for forklift handling. (43731001) 38 Wheel, D=200mm. Wt= 49

L=990 Ht=1150 B=730 (1707007, 1707008, 1799014)

21 of 30

PART LIST 2007 01.01.2007


11901 1005300 A Bag plate for trolley syst. 50.(43640300) 36 To be used with code no.: 1005035. Wt= 5

L=430 Ht=240 B=570

11903 1010010 A Lid syst. 50. (43610001) D=402 Ht=27 Hp=15 Wt= 0,3

(1701050)

1010011 A Lid syst. 50 w/straight suction inlet D=51.(43611001) D=402 Ht=27 Hp=15 Wt= 4,1

(1020033, 1701050)

1010012 A Lid syst. 50 w/bent suction inlet D=51.(43612001) D=402 Ht=27 Hp=15 Wt= 4,2

(1020033, 1701050)

11904 1010020 A Lid syst. 200. (43615001) D=602 Ht=27 Hp=15 Wt= 0,4

(1701051)

1010021 A Lid syst. 200 w/suction inlet D=51.(43616001) D=602 Ht=27 Hp=15 Wt= 8,4

(1020033, 1701051)


(1701051)


(1701051)

11905 1010110 A Cyclone body for lid code nos. 1010010, -020.(43510001) 47 Inlet-pipe holder/suction outlet D=51. Wt= 5,6

D=160 Ht=750 Hp=500 (1020033, 1701006)

1010130 A Cyclone body for lid code nos. 1010010, -020.(43511001) 47 Inlet-pipe holder/suction outlet D=63. Wt= 5,9

D=160 Ht=780 Hp=535 (1701006)

1010140 A Cyclone body for lid code nos. 1010010, -020.(43512001) 47 Inlet-pipe holder/suction outlet D=76. Wt= 9,2

D=200 Ht=925 Hp=735 (1701006)

22 of 30

PART LIST 2007 01.01.2007


11374 1010150 A Cyclone syst. 50.(43520001) D=402 Ht=445 Wt= 24

(0920091, 1701050, 1799012)

18 Suction inlet pipes have to be chosen according to hose size to be used. Code no.:

22 1016013 (D=76-76), 1016022 (D=76-51), 1016023 (D=76-63)

17 Suction outlet pipes have to be chosen according to hose size to be used. Code no.:

23 1010210 (D=51), 1010220 (D=63), 1010230 (D=76)

11375 1010160 A Cyclone syst. 200.(43530001) 28 Suction inlet: D=102(DN100). Wt= 45,3

D=602 Ht=640 (0920090, 1701051, 1799021)

18 Suction inlet pipes have to be chosen according to hose size to be used. Code no.:1017056 (D=102), 1017057 (D=76), 1017058 (D=63)

17 Suction outlet pipes have to be chosen according to hose size to be used. Code no.:1010220 (D=63), 1010230 (D=76), 1010240 (D=102)

15403 1010155 B Cyclone syst. 200 high efficency.(43522001) 28 Suction inlet: D=102(DN100). Wt= 46,7

24 Cyclone diameter 402 mm, lid diameter 602 mm D=602 Ht=1600 (0920091, 1701050, 1701051, 1799021)


17 Suction outlet pipes have to be chosen according to hose size to be used. Code no.:1010230 (D=76), 1010240 (D=102), 1010245(D=152)

15402 1010165 B Cyclone syst. 200 high efficient.(43532001) 28 Suction inlet: D=152(DN150). Wt= 120

D=602 Ht=2400 (0920090F, 1701051, 1799021)


17 Suction outlet pipes have to be chosen according to hose size to be used. Code no.:1010240 (D=102), 1010245 (D=152)

11798 1010170 A Cyclone syst. 200/300 w/inside abrasion plate for the cylindric part.(43534001) 175 Suction outlet / inlet: D=152 / D=152(DN150). Wt= 110

107 Discharge opening D=200 mm.D=800/602 Ht=1255 Hp=1025 (1701051, 1701073, 1708013)

108 Optional: Abrasion plate for the conical part, code no. 1701076109 Recommended togehter with silo syst. 300.

18 Suction inlet pipes have to be chosen according to hose size to be used. Code no.:1017050 (D=152,4), 1017051 (D=127), 1017052 (D=102)23 of 30

PART LIST 2007 01.01.2007


11906 1010210 A Suction outlet w/flange for all lids, D=51, Ht=90, D=190.(43620001) Wt= 0,1

1010220 A Suction outlet w/flange for all lids, D=63, Ht=90, D=190.(43620100) Wt= 1,2




(1701006)

11907 1010250 A Cup w/flange. (43621001) D=190 Ht=118 Wt= 0,45

1010252 A Cup w/flange, A4.(43621200) D=190 Ht=118 Wt= 0,9

11908 1010251 A Cup w/flange for dry suction.

(43621100) D=190 Ht=110 Wt= 0,45

11819 1010300 A Preseparator syst. 200, coarse grain.(43560001) 175 Suction outlet / inlet: D=76 / D=63. Wt= 13,9

D=602 Hp=255 (1701051, 1701070)

1010301 A Preseparator syst. 200, coarse grain.(43561001) 175 Suction outlet / inlet: D=76 / D=76. Wt= 14

D=602 Hp=255 (1701051, 1701070)

1010303 A Preseparator syst. 50, coarse grain.(43550001) 175 Suction outlet / inlet: D=51 / D=51. Wt= 14

D=402 Hp=255 (1701050, 1701070)

11960 1010305 A Preseparator syst. 200/300, coarse grain.(43562001) 175 Suction outlet / inlet: D=152 / D=152(DN150). Wt= 34

Ht=303 D=602 Hp=290 (1701051, 1701071)

18 Suction inlet pipes have to be chosen according to hose size to be used. Code no.:1017050 (D=152,4), 1017051 (D=127), 1017052 (D=102)

11951 1010308 A Preseparator syst. 50, grit/dust, high efficiency. (43555001) 178 Suction outlet D=51. Suction hose D=51 into the inlet pipe D=63. Wt= 27

D=402 Hp=310 Ht=410 (1701050, 1701078, 1708010)

1010309 A Preseparator syst. 200, grit/dust, high efficiency.(43570001) 175 Suction outlet / inlet: D=76 / D=76(DN65). Wt= 52,6

D=602 Ht=500 Hp=390 (1701051, 1701074, 1708010)

18 Suction inlet pipes have to be chosen according to hose size to be used. Code no.:1017054 (D=76,1), 1017055 (D=63,5)

11799 1010310 A Preseparator syst. 200/300, grit/dust, high efficiency.(43571001) 175 Suction outlet / inlet: D=152 / D=152(DN150). Wt= 75

D=602 Ht=1050 Hp=900 (1701051, 1701072, 1708010, 1799021)

18 Suction inlet pipes have to be chosen according to hose size to be used. Code no.:1017050 (D=152,4), 1017051 (D=127), 1017052 (D=102)

24 of 30

PART LIST 2007 01.01.2007


11758 1010400 A Drum filler w/suction inlet/outlet, D=51.(43590001) 143 Fits in a std. 2" BSP bung-hole. Wt= 1,2

L=170 Ht=360 B=70 (1020033, 1701030, 1701032)

11759 1014001 A Floor suction head w/rubber strips and wheels,(43840001) 104 for suction pipe D=51. Wt= 1,2

B=450 (1702006, 1702056, 1707000)

1014002 A Floor suction head w/rubber strips and wheels,(43840050) 104 for suction pipe D=38. Wt= 0,9

B=370 (1702005, 1702055, 1707000)

1014010 1014010 A Floor suction head w/rubber strips and wheels, D=38,(43840100) 104 for suction pipe D=51. Wt= 0,9

B=400 (1702010, 1707001, 1799007)

1014011 A Floor suction head w/rubber strips and wheels, D=38,(43840150) 104 for suction pipe D=51. Wt= 0,9

B=500 (1702011, 1707001, 1799007)

1014012 A Floor suction head w/rubber strips and wheels, D=38,(43840200) 104 for suction pipe D=51. Wt= 1

B=600 (1702012, 1707001, 1799007)

11818 1014013 A Floor suction head w/rubber strips and wheels, D=65,(43840250) 104 for suction pipe D=51. Wt= 0,9

B=400 (1702010, 1707002, 1799007)

1014014 A Floor suction head w/rubber strips and wheels, D=65,(43840300) 104 for suction pipe D=51. Wt= 1

B=500 (1702011, 1707002, 1799007)


B=600 (1702012, 1707002, 1799007)

11761 1014030 A Floor suction head w/rubber strips and wheels, D=65,(43840400) 104 for suction pipe D=63. Wt= 2

B=500 (1702030, 1707002)


B=600 (1702031, 1707002)

11762 1014050 A Floor suction head w/rubber strips(43840500) 104 for suction pipe D=51. Wt= 0,9

B=400 (1702040, 1799007)

1014060 A Floor suction head w/brushes.(43840550) 104 for suction pipe D=51. Wt= 0,8

B=400 (1702060, 1799007)

25 of 30

PART LIST 2007 01.01.2007


11765 1014101 A Suction tool, w/false air valve, L=910, D=51.(43850001) Wt= 1,8

1014102 A Suction tool, w/false air valve, L=930, D=63.(43850050) Wt= 2,1

1014103 A Suction tool, w/false air valve, L=930, D=76.(43850100) Wt= 3,2

12386 1014105 A Suction tool, w/false air valve and handle, L=1200, D=51.

(43850150) Wt= 3,61014106 A Suction tool, w/false air valve and handle, L=1200, D=63.

(43850200) Wt= 4,61014107 A Suction tool, w/false air valve and handle, L=1200, D=76.

(43850250) Wt= 5,1

11766 1014110 A Suction tool, scraper, L=500, D=38.(43851001) Wt= 0,6

1014111 A Suction tool, scraper, L=500, D=51.(43851050) Wt= 0,6





1014220 1014220 A Suction tool, hand held, w/stiff brush, D=51.

(43860001) 180 antistatic, polypropylen. Wt= 0,2D=90

1014221 A Suction tool, hand held, w/soft brush, D=51.(43860200) 180 antistatic, polypropylen. Wt= 0,2

D=90

1014230 1014230 A Suction tool, hand held, D=51.(43861001) 180 antistatic, polypropylen. Wt= 0,2

B=130

1014261 1014261 A Suction tool, Hand held, conical, D=51.

(43862001) 180 antistatic, polypropylen. Wt= 0,1L=250

11770 1014280 A Suction tool, cleaning of pipe, D=100.

(43863001) 181 for connection to code no. Wt= 0,1

1014281 A Suction tool, cleaning of pipe, D=200.(43863100) 181 for connection to code no. Wt= 0,2

11373 1015001 A Suction tool pipe, A2, three parts, D=38.(43841001) L=1200 Wt= 0,9

1015014 A Suction tool pipe, PEHD-EL, D=51.

(43842001) L=1000 Wt= 0,6

1015015 A Suction tool pipe, bend, polyamid 12, antistatic, D=51.(43842150) L=330 Wt= 0,1

11772 1015017 A Connection pipe, A2, D=51.

(43842200) 182 For connection of more pipes code no. 1015014 Wt= 0,1L=120

26 of 30

PART LIST 2007 01.01.2007


11773 1015020 A Suction tool pipe, aluminium, D=63.(43843001) L=1000 Wt= 1

1015021 A Suction tool bend, aluminium, w/handle and abrasion plate, D=63.

(43843050) (1701075) Wt= 1,6

1015022 A Suction tool swivel, A2, D=63.(43843100) L=150 Wt= 0,4

11774 1016010 A Hose connector, galv. steel, D=38.

(43880001) D=38, L=150 Wt= 0,1

1016011 A Hose connector, aluminium, D=50.(43880050) L=150 Wt= 0,1

1016012 A Hose connector, galv. steel, D=63.

(43880100) L=150 Wt= 0,3

1016013 A Hose connector, A2, conical, D=76(43880150) L=180 Wt= 0,5

11775 1016020 A Hose reducer, A4, conical, D=51-38, L=140.

(43880200) Wt= 0,21016021 A Hose reducer, A4, conical, D=63-51, L=180.

(43880250) 183 w/quick-coupling. Wt= 0,3

1016022 A Hose reducer, A4, conical, D=76-51, L=210.(43880300) 183 w/quick-coupling. Wt= 1,1

1016023 A Hose reducer, A4, conical, D=76-63, L=165.

(43880350) Wt= 0,41016030 A Hose reducer, galv. Steel, D=102-76, L=215.

(43880400) Wt= 0,7

11776 1017010 A Branch pipe, galv. steel, L=460, D=63-51-63.(43870100) Wt= 1,3

1017011 A Branch pipe, galv. steel, L=460, D=76-51-76.(43870300) Wt= 1,4





11777 1017020 A Branch pipe, Y-type, galv. steel, L=430, D=63-51-51.

(43871100) Wt= 11017021 A Branch pipe, Y-type, galv. steel, L=410, D=76-51-51.

(43871300) Wt= 1,11017022 A Branch pipe, Y-type, galv. steel, L=420, D=76-63-63.



(43871001) Wt= 1,11017024C B Branch pipe, Y-type, galv. steel, L=430, D=51-38-38.(43871004) Wt= 1,1

1017025 A Branch pipe, Y-type, galv. steel, L=430, D=63-63-63.(43871200) Wt= 1,4

11795 1017040 A Suction inlet/outlet, D=63, Ht=50

(43881001) 36 To be used with code no.: 0210001. Wt= 0,2

1017041 A Suction inlet/outlet, D=76, Ht=60(43881050) 36 To be used with code no.: 0210002. -003. Wt= 0,3

1017042 A Suction inlet/outlet, D=102, Ht=60(43881100) 36 To be used with code no.: 0210004, -005. Wt= 0,4

27 of 30

PART LIST 2007 01.01.2007


11815 1017050 A Suction inlet w/flange, D=152, L=155, DN150(43882001) Wt= 6,5

1017051 A Suction inlet w/flange, D=127, L=155, DN150(43882050) Wt= 6,2

1017052 A Suction inlet w/flange, D=102, L=155, DN150(43882100) Wt= 5



1017056 A Suction inlet w/flange, D=102, L=110, DN100(43882202) Wt= 5




15628 1020010 A Pipe, steel, DIN 2394, 6m, D=50,8x1,25.(43883001) Wt= 10,9

1020011 A Pipe, steel, DIN 2394, 6m, D=63,5x1,5.(43883050) Wt= 13,7

1020012 A Pipe, steel, DIN 2394, 6m, D=76,1x1,5.(43883100) Wt= 16,5

1020013 A Pipe, steel, DIN 2394, 6m, D=102x2.(43883150) Wt= 22

14342 1020020 A Pipe connection, conductive, D=51

(43884001) Wt= 0,21020021 A Pipe connection, conductive, D=63








(43884450) Wt= 0,5

11778 1020033 A Quick-coupling, female, polyamid 12, antistatic, D=51.(43885001) L=88 Wt= 1,1

(1799019)

1020034 A Quick-coupling, female, polyamid 12, antistatic, w/switch, D=51.(43885050) L=120 Wt= 1,1

(1716015, 1799019)

15629 1020040 A Quick-coupling, male, PEHD, antistatic, D=76-51.(43885100) L=225 Wt= 0,8

(1020033)

1020041 A Quick-coupling, male, PEHD, antistatic, D=76-63.(43885200) L=165 Wt= 0,9

1020042 A Quick-coupling, male, PEHD, antistatic, D=76-76.(43885250) L=165 Wt= 1

105 Female coupling: code nos. 1799091, -092

15630 1020048 A Quick-coupling, female, steel, D=76-76.(43885300) Wt= 1,2

1020049 A Quick-coupling, female, steel, w/switch, D=76-76.(43885350) (1716015) Wt= 1,3

105 Female coupling: code nos. 1016013, -022, -023

28 of 30

PART LIST 2007 01.01.2007


11782 1020050 A Bracket for wall, code no. 1020060.(43883200) L=200 Wt= 0,5

11783 1020060 A Bracket w/screw and nut for code no. 1020050.

(43883250) L=200 Wt= 0,3

11784 1020070 A Clamp for pipe D=50,8 for code no. 1020060.

(43883300) Wt= 0,21020071 A Clamp for pipe D=63,5, for code no. 1020060.

(43883301) Wt= 0,31020072 A Clamp for pipe D=76,1, for code no. 1020060.

(43883302) Wt= 0,3

11804 1025085 A Suction hose, PE, antistatic, Di=32, 20m(43810001) Wt= 5

1025091 A Suction hose, PE, antistatic, Di=38, 5m *(43811001) Wt= 1,8

1025093 A Suction hose, PE, antistatic, Di=38, 20m(43811100) Wt= 6,6

1025100 A Suction hose, PE, antistatic, Di=51, 1m*(43812001) Wt= 0,7

1025101 A Suction hose, PE, antistatic, Di=51, 6m*(43812100) Wt= 3

1025102 A Suction hose, PE, antistatic, Di=51, 10m*(43812200) Wt= 5

1025103 A Suction hose, PE, antistatic, Di=51, 20m(43812300) Wt= 9,71025103A B Suction hose, PE, antistatic, Di=51, 20m*(43812301) Wt= 14

1025105 A Suction hose, PE, antistatic, Di=51, 0.75m *(43812400) Wt= 0,5

1025106 A Suction hose, PE, antistatic, Di=51, 1.35m *(43812500) Wt= 0,8

1025107 A Suction hose, PE, antistatic, Di=51, 1.75m *(43812600) Wt= 1

49 Temperature -40° - +60°C

52 *w/male and female couplings in Polyamid 12,

11802 1025120 A Suction hose, PVC, antistatic, Di=51, 1m*(43822001) Wt= 0,7

1025121 A Suction hose, PVC, antistatic, Di=51, 6m*(43822100) Wt= 6,2

1025122 A Suction hose, PVC, antistatic, Di=51, 10m*(43822200) Wt= 11,5

1025123 A Suction hose, PVC, antistatic, Di=51, 30m(43822300) Wt= 301025123A A Suction hose, PVC, antistatic, Di=51, 30m*(43822301) Wt= 30

49 Temperature -20° - +70°C

52 *w/male and female couplings in Polyamid 12,

50 If the hose shall be used in Ex zones, get in touch with norclean.

29 of 30

PART LIST 2007 01.01.2007


1025220 1025213 A Suction hose, PUR, antistatic, Di=38, 20m(43831001) Wt= 10,2

1025220 A Suction hose, PUR, antistatic, Di=51, 1m*(43832001) Wt= 1

1025221 A Suction hose, PUR, antistatic, Di=51, 6m*(43832100) Wt= 6,2

1025222 A Suction hose, PUR, antistatic, Di=51, 10m*(43832200) Wt= 6,8

1025223 A Suction hose, PUR, antistatic, Di=51, 20m(43832300) Wt= 13,21025223A B Suction hose, PUR, antistatic, Di=51, 20m*(43832301) Wt= 13,3

1025232 A Suction hose, PUR, antistatic, Di=63, 10m(43833001) Wt= 8,1







1025252 A Suction hose, PUR, antistatic, Di=102, 10m(43835001) Wt= 16

1025262 A Suction hose, PUR, antistatic, Di=152, 10m(43836001) Wt= 21

49 Temperature -40°C - +90°C106 Short period: 125°C.

52 *w/male and female couplings in Polyamid 12, (D=51).

50

1025510 1025510 A Ende sleeve antist., D=32(43819001) Wt= 0,1

1025520 A Ende sleeve antist., D=38(43819011) Wt= 0,1

1025530 A Ende sleeve antist., D=51(43819021) Wt= 0,1

11788 1090010 A Service kit, complete.

(43290001) L=280 Ht=400 B=90 Wt= 3,2 (1714100, 1714101)

11789 1090011 A Vacuum-meter w/plate.

(43290051) D=90 Wt= 0,3

1090012 A Manometer w/claw couplings. (43290101) Wt= 0,4

If the hose shall be used in Ex zones, get in touch with norclean.

30 of 30

Documents

Norclean Industrial Vaccums - Environmental Cleanenvironmentalcleanair.com/pdf_file/vacuum/spares1A.pdf · NORCLEAN PART LIST 2007 Environmental Clean Air Company Norclean Industrial