NISSAN/UD · 2014-02-21 · Nissan / UD 4.17.1 NISSAN / UD TRANSMISSION INDEX Transmission Make and Model P.T.O. Appl. Number Number Forward Speeds Teeth in P.T.O. Driver MES-50A

NISSAN/UDNISSAN/UD

Nis

san

/ UD

January 2012

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.

The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.

To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.

WARNING — User Responsibility

The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the “Offer of Sale”.

Offer of Sale

© Copyright 2012, Parker Hannifin Corporation, All Rights Reserved

4.17.II Parker Hannifin CorporationChelsea Products DivisionOlive Branch, MS 38654 USA

Parker Hannifin CorporationChelsea Products DivisionOlive Branch, MS 38654 USA

January 2012

Transmission P.T.O. Driver & Aperatures (Viewed from Rear of Transmission)

L-Left Side R-Right Side B-Bottom Side T-Top Side

For transmission not listed, contact your authorized Chelsea Distributor.

IMPORTANT: See Safety Information in Section 1 of the Chelsea Applications catalog HY25-3000/US.

Nissan / U

D

4.17.1

NISSAN / UD TRANSMISSION INDEX

Transmission Make and ModelP.T.O.Appl.

Number

NumberForwardSpeeds

Teeth inP.T.O.Driver

MES-50A NSD-7 5 L34

MES-50B NSD-8 5 L33

MES-50C NSD-9 5 L32

MLS-61A NSD-6 6 L25

MLS-61B (UD3000SD) NSD-6 6 L25

MLS-62B NSD-6 6 L25

MLS-63B NSD-6 6 L25

TMH-263 NSD-1 5 L23


January 2012

Nis

san

/ U

D

4.17.2

Engine %

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.

NSD-1

PITCH LINE TO APERTURE FACE:

TRANSMISSION GEAR DATA:

LEFT SIDE ONLY

23 Teeth - SPUR

Inter.Torq.

Dir.Rot. Filler Block

AdapterAssy. Stud Kit

P.T.O. ModelP.T.O. ModelLEFT Side

RevHiStud Kit

AdapterAssy.Filler Block

RevHi

Engine %Dir.Rot.

Inter.Torq.

L.H. 06-Bolt Opening Gear FORWARD of Centerline

1.0850" (27.5600MM)

TMH-263

ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT7-A-032 Opp100XRAHX-*3 (1) 125 37 7170-64X

ONE SPEED - TWO GEAR - MECHANICAL SHIFT7-A-062 Eng221XCAHX-*5 250 16 328170-169X7-A-032 (2)7-A-032 221XEAHX-*5 Eng250 19 328170-169X7-A-032 221XLAHX-*5 Eng200 25 328170-169X7-A-032 221XPAHX-*5 Eng200 31 328170-169X

442KAAHX-*5 (3) Eng250 14 7170-78X442KCAHX-*5 (4) Eng250 18 7170-78X442KFAHX-*5 (5) Eng250 23 7170-78X442KHAHX-*5 (6) Eng250 27 7170-78X442KLAHX-*5 (7) Eng250 30 7170-78X442KQAHX-*5 (7) Eng225 32 7170-78X442KRAHX-*5 (7) Eng225 37 7170-78X442KSAHX-*5 (7) Eng200 44 7170-78X442KUAHX-*5 (7) Eng195 52 7170-78X442KWAHX-*5 (7) Eng175 61 7170-78X442KXAHX-*5 (7) Eng140 73 7170-78X

ONE SPEED - TWO GEAR - POWERSHIFT (AIR)Eng236KDAHX-*5 (7) 250 24 7170-78X

236KKAHX-*5 (7) Eng250 31 7170-78X236KQAHX-*5 (7) Eng250 41 7170-78X236KUAHX-*5 (7) Eng225 47 7170-78X

ONE SPEED - FORWARD & REVERSE7-A-140 (2)Eng340XFAHX-*5 (8) 200 20 21 7170-78X

7-A-032 352XSAHX-*5 (7) Eng140 44 57 7170-78X

ONE SPEED - DUAL SHAFTEng452XSAHX-*5 (7) 140 44 7170-78X

GEARED ADAPTERS626KAHX-3AH 250 7170-78X630KAHX-3AH 250 7170-78X645KAHX-3AH 250 7170-78X

(1) Gear and Shaft Kit No. KXA-2-P-565(2) Filler block furnished with P.T.O.(3) Input Gear Part No. 5-P-1280(4) Input Gear Part No. 5-P-1287

(5) Input Gear Part No. 5-P-1077(6) Input Gear Part No. 5-P-1364(7) Input Gear Part No. 5-P-1004(8) Input Gear Part No. 5-P-581

NISSAN / UD

Engine %




LEFT SIDE ONLY

25 Teeth - SPUR

Inter.Torq.




RevHiStud Kit


RevHi

Engine %Dir.Rot.

Inter.Torq.

L.H. 06-Bolt Opening Gear NON-STANDARD of Centerline

-.8345" (-21.1963MM)

MLS-63B

MLS-62B

MLS-61B

MLS-61A

NSD-6

ONE SPEED - TWO GEAR - MECHANICAL SHIFTEng447AUFYX-E6 (1) 110 60 Furnished

447AUFYX-G6 (1) Eng110 60 Furnished447AUFYX-P6 (1) Eng110 60 Furnished447AWFYX-E6 (2) Eng76 87 Furnished447AWFYX-G6 (2) Eng76 87 Furnished447AWFYX-P6 (2) Eng76 87 Furnished

NOTE: Through 1994 these transmissions required the "P" shift option designator which featured the 328388-60X installation kit. 1995-1998 the "E" shift option designator which includes the 328388-63X installation kit. 1999 and later the "G" shift option designator which includes the 328388-69X installation kit.

(1) Input Gear Part No. 5-P-977(2) Input Gear Part No. 5-P-976

NISSAN / UD


January 2012

Nissan / U

D

4.17.3

Engine %


NSD-1



LEFT SIDE ONLY

23 Teeth - SPUR

Inter.Torq.




RevHiStud Kit


RevHi

Engine %Dir.Rot.

Inter.Torq.

L.H. 06-Bolt Opening Gear FORWARD of Centerline

1.0850" (27.5600MM)

TMH-263

ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT7-A-032 Opp100XRAHX-*3 (1) 125 37 7170-64X

ONE SPEED - TWO GEAR - MECHANICAL SHIFT7-A-062 Eng221XCAHX-*5 250 16 328170-169X7-A-032 (2)7-A-032 221XEAHX-*5 Eng250 19 328170-169X7-A-032 221XLAHX-*5 Eng200 25 328170-169X7-A-032 221XPAHX-*5 Eng200 31 328170-169X

442KAAHX-*5 (3) Eng250 14 7170-78X442KCAHX-*5 (4) Eng250 18 7170-78X442KFAHX-*5 (5) Eng250 23 7170-78X442KHAHX-*5 (6) Eng250 27 7170-78X442KLAHX-*5 (7) Eng250 30 7170-78X442KQAHX-*5 (7) Eng225 32 7170-78X442KRAHX-*5 (7) Eng225 37 7170-78X442KSAHX-*5 (7) Eng200 44 7170-78X442KUAHX-*5 (7) Eng195 52 7170-78X442KWAHX-*5 (7) Eng175 61 7170-78X442KXAHX-*5 (7) Eng140 73 7170-78X

ONE SPEED - TWO GEAR - POWERSHIFT (AIR)Eng236KDAHX-*5 (7) 250 24 7170-78X

236KKAHX-*5 (7) Eng250 31 7170-78X236KQAHX-*5 (7) Eng250 41 7170-78X236KUAHX-*5 (7) Eng225 47 7170-78X

ONE SPEED - FORWARD & REVERSE7-A-140 (2)Eng340XFAHX-*5 (8) 200 20 21 7170-78X

7-A-032 352XSAHX-*5 (7) Eng140 44 57 7170-78X

ONE SPEED - DUAL SHAFTEng452XSAHX-*5 (7) 140 44 7170-78X

GEARED ADAPTERS626KAHX-3AH 250 7170-78X630KAHX-3AH 250 7170-78X645KAHX-3AH 250 7170-78X

(1) Gear and Shaft Kit No. KXA-2-P-565(2) Filler block furnished with P.T.O.(3) Input Gear Part No. 5-P-1280(4) Input Gear Part No. 5-P-1287

(5) Input Gear Part No. 5-P-1077(6) Input Gear Part No. 5-P-1364(7) Input Gear Part No. 5-P-1004(8) Input Gear Part No. 5-P-581

NISSAN / UD

Engine %




LEFT SIDE ONLY

25 Teeth - SPUR

Inter.Torq.




RevHiStud Kit


RevHi

Engine %Dir.Rot.

Inter.Torq.


-.8345" (-21.1963MM)

MLS-63B

MLS-62B

MLS-61B

MLS-61A

NSD-6

ONE SPEED - TWO GEAR - MECHANICAL SHIFTEng447AUFYX-E6 (1) 110 60 Furnished

447AUFYX-G6 (1) Eng110 60 Furnished447AUFYX-P6 (1) Eng110 60 Furnished447AWFYX-E6 (2) Eng76 87 Furnished447AWFYX-G6 (2) Eng76 87 Furnished447AWFYX-P6 (2) Eng76 87 Furnished

NOTE: Through 1994 these transmissions required the "P" shift option designator which featured the 328388-60X installation kit. 1995-1998 the "E" shift option designator which includes the 328388-63X installation kit. 1999 and later the "G" shift option designator which includes the 328388-69X installation kit.

(1) Input Gear Part No. 5-P-977(2) Input Gear Part No. 5-P-976

NISSAN / UD


January 2012

Nis

san

/ U

D

4.17.4

Engine %


NSD-7



LEFT SIDE ONLY

34 Teeth - R.H. HELIX

Inter.Torq.




RevHiStud Kit


RevHi

Engine %Dir.Rot.

Inter.Torq.


2.9890" (75.9206MM)

MES-50A

ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT7-A-240(P)Opp100XRGWX-*4 (1) 125 79 329000-2X 7170-11X7-A-062(T)7-A-240(P)309102 (1) Opp125 79 329000-2X Furnished7-A-062(T)

NOTE: 100XRGWX-*4 requires 2-P-746 and wire shift cover 329009X.

NOTE: 309102 is a standard 100XRGWX-W4XA. It also includes the following parts: 7-A-240, 7-A-062, 329000-2X and 7170-11X.

(1) Gear and Shaft Kit No. KXA-2-P-746

NISSAN / UD

Engine %




LEFT SIDE ONLY


Inter.Torq.




RevHiStud Kit


RevHi

Engine %Dir.Rot.

Inter.Torq.

L.H. 06-Bolt Opening Gear CENTER of Centerline

2.9890" (75.9206MM)

MES-50B

NSD-8

ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT7-A-240(P)Opp100XRGWX-*4 (1) 125 76 329000-2X 7170-11X


NISSAN / UD


January 2012

Nissan / U

D

4.17.5

Engine %




LEFT SIDE ONLY


Inter.Torq.




RevHiStud Kit


RevHi

Engine %Dir.Rot.

Inter.Torq.


2.9890" (75.9206MM)

MES-50B

NSD-8

ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT7-A-240(P)Opp100XRGWX-*4 (1) 125 76 329000-2X 7170-11X


NISSAN / UD


January 2012

Nis

san

/ U

D

4.17.6

Engine %


NSD-9



LEFT SIDE ONLY


Inter.Torq.




RevHiStud Kit


RevHi

Engine %Dir.Rot.

Inter.Torq.


3.0490" (77.4450MM)

MES-50C

ONE SPEED - SINGLE GEAR - MECHANICAL SHIFT7-A-240(P)Opp100XRGWX-*4 (1) 125 74 329000-2X


NISSAN / UD

Documents

NISSAN/UD · 2014-02-21 · Nissan / UD 4.17.1 NISSAN / UD TRANSMISSION INDEX Transmission Make and Model P.T.O. Appl. Number Number Forward Speeds Teeth in P.T.O. Driver MES-50A