http://nissantanaka.com

Fiber Laser seriesProviding solutions with customer satisfaction

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMM FMR

FMR

FMR

FMR

FMR

Optional functions

● Ultra-high-speed piercing function 　（PAT. 4162772）● Preceding burning ● I-marking device ● Z- marking device ● Pen- marking device ● NC memory expansion ● Cutting table for laser● Air compressor ● Steel plate stocker ● Online data inputting function● Collision prevention function● Friction reducer (PAT. 4799240)

Cutting sample Mild steel black skin SS400

Standard functions

G.O.S. function image drawing

Oxygen concentration is controlled so that noexcessive oxidization reaction can occur.

nozzle

Cutting material

Air + Oxygenmix gas

Oxygen（99.7% concentration

or more）

● Motorized focal point adjusting device● AICC function● Scheduled function● Static capacitance type standoff control function● High speed piercing function ● Piercing completion detecting function ● Burning detection function ● Coordinate axis function ● Retry function ● Skipping function ● Skip log function ● Manual retry function ● Program restart function ● Backward travel function● Drawing function ● Rotating warning lamp ● Periodical maintenance instructing function ● Automatic power shut off function● Ping pong function ● G.O.S. function (PAT.4183779) ● Laser beam shielding cover ● Nozzle monitoring ITV (attaching the coordinate rotation cross line) ● Machine body operation monitoring ITV● Obstacle detection function● Operation deck

● This machine shall be operated and maintained by persons who have completed a laser training program specified by the manufacturer.● For your own safety, please read instruction manual carefully before use.

Thickness 6 mm Thickness 12 mm Thickness 19 mm Thickness 22 mm Thickness 32 mm

2014.06.2000.NPC

CAUTION

＊The specifications etc. of this product are subject to change without any notification for improvement

11, CHIKUMAZAWA, MIYOSHI, IRUMA, SAITAMA 354-8585 JAPANTEL : 049-258-4412　FAX : 049-258-4858

FMM2565-TI2000（2kW） FMM2565-TI4000（4kW）19ｍｍ 　　　　　　　 22mm

W2,600×L6,60037kg/m・50kg/m rail

FANUC Series 31iLB PANELi

1~10,000mm/min48,000mm/min24,000mm/min20,000mm/min20,000mm/min20,000mm/min

252,500

3,500｜3,800

303,000

4,000｜4,300

353,500

4,500｜4,800

404,000

5,000｜5,300

454,500

5,500｜5,800

505,000

6,000｜6,500

555,500

6,500｜7,000

1~6,000mm/min24,000mm/min12,000mm/min20,000mm/min16,000mm/min24,000mm/min

TI200019mm

TI400022mm

TI500032mm

TypeEffective cutting thickness MSCutting area (mm)Rail typeNC system

Processing feed speedRapid traverse speedManual rapid traverse speedCutting head lifting speedCutting head approach speedHome return speed

■ Machine specifications

■Machine speed specifications

■ Machine specifications

■Machine speed specifications

《Various stocker system of TANAKA》

Flow of the materialFlow of the Product

■Machine size

■Machine size

TANAKA GANTRY FIBER LASER PROVIDES LOW RUNNING COST AND EXCELLENT CUTTING QUALITY 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 IN IRRESPECTIVE OF A STEEL PLATE

TypeEffective cutting width (mm)Rail span (mm)Effective cutting length (mm)Rail typeRail length (mm)NC systemLaser oscillator *1

Depending on the customer 's request specifications37kg/m・50kg/m rail

Effective cutting length + 3,500 mmFANUC Series 31iLB PANELi

TI2000( rated output 2kw) / TI4000( rated output 4kw) / TI5000( rated output 5kw)

TypeMild steel black skin material *2 Vertical cutting*2. Material ( Chubu steel plate) Shape: □70 mm x 70 mm ( corner portion R 5)

Processing feed speedRapid traverse speedManual rapid traverse speedCutting head lifting speedCutting head approach speedHome return speed

■Cutting specifications

FMR series features

FMM series features

NEXT GENERATION LASER CUTTING MACHINE, SUITABLE TO CUT THE 8 × 20FEET STANDARD SIZE PLATE

*1. The cutting specifications of the laser cutting machine depend on a selected oscillator. Please see details of cutting specifications below.

▶Low running cost In comparison to CO2 laser cutting machines, can reduce the running costs by 63%. Power consumption is decreased, and there are no consumables of optical mirrors and laser gas which are necessary for CO2 laser cutting machine. * When compared 4kW fiber laser with 4kW CO2 laser.

▶The most suitable machine for [ large standard size 8 x 20feet material] and [thick plate]The machine body and machine body cover which fit up to a large standard size 8 x 20 feet steel plate ensured the safety of fiber laser cutting. TANAKA laser technology, which specializes in cutting above 5mm thickness, has achieved the stability of cutting and reduction in the piercing time. An advanced TANAKA laser technology will enable to stable cut the standard size material and thick plates.

▶Improvement of productivity by combining with expandable stocker systemCan be combined with an expandable pallet changer system and stocker. This laser cutting machine provides the automatic cutting system which can meet a wide variety of customers’ needs, and improve productivity.

A wide variety of the loading and unloading station, a stocker and a pallet changer can be combined with the TANAKA fiber laser machines.

▶Low running cost In comparison to CO2 laser cutting machines, can reduce the running costs by 71%. Power consumption is decreased, and there are no consumables of optical mirrors and laser gas which are necessary for CO2 laser cutting machine. * When compared 5kW fiber laser with 6kW CO2 laser.

▶Optimized fiber laser cutting performanceTANAKA laser processing technology and TANAKA laser processing torch head maximizing the performance of fiber laser cutting can provide reduction in piercing time, the improvement of fine processing technology and cutting stability.

▶Continuous operation is feasible for both standard size plates and lager size platesA wide range of effective cutting width is prepared from 2.5m to 5.5m. Effective cutting length can be expanded by extending rail. FMR will allow the continuous operation of various material sizes including larger plates than standard plate sizes.

*FMM above is a reference drawing. Please approve that the reference drawing may be different from an actual machine.

*FMR above is a reference drawing. Please approve that the reference drawing may be different from an actual machine.