Nimble Technoplast3.imimg.com/data3/LI/PD/MY-1133702/cl_nimbletechnoplast.pdf · 2020-01-21 · Light Source : Super luminosity LED blinking at 60 to 70 pulses a minute. LED Quantity:

C-143, Sector-10, Noida - 201301, Uttar Pradesh, India Contact No. 9810146453

Wide Range Of Road Safety Products

Nimble Technoplast

Spring Post

Spring posts are regarded as one of the most efficient road safety product for lane division.They have a unique property of bending when hit and of bouncing back to original state when impact / load is removed. This property of spring post which prevents the vehicle from any kind of damage.

Center Lane Dividing for narrow roads Multi lanes for broad roads Sharp Curves Traffic Islands At the start of central verge No Stop Zone at T Shape road traffic signal Parking lots Dangerous medians and 'U' Turn etc. Construction Zones

Nimble Technoplast Wide Range Of Road Safety Products

Usage Areas:

Spring Post

Spring posts are regarded as one of the most efficient road safety product for lane division.They have a unique property of bending when hit and of bouncing back to original state when impact / load is removed. This property of spring post which prevents the vehicle from any kind of damage.

Colour : Red Reflective Band : Three Reflective Bands of

EN471 Certified Body Material : Strong Flexible UV Protected

PU Features : Very Durable Impact Absorbant and

Light Weighted Single Piece with no Joint Size : 740 x 80 x 200 MM


Usage Areas:

TRAFFIC CONES

Our clients can avail quality Road Safety Cones, widely used in barricading, making parking zones, work zones, controlling and diverting the traffic. These safety cones are made of a fiber with strength larger than the Low Density Poly Ethylene, thus making the cone durable and easy to handle.


Centre Lane Dividing Diversion of the Roads Parking Zones Men at Work Zone No Entry Zone Temporary barricading at Hotels. Hospitals, Railway

Stations, Air-port , Bus Terminals. etc...

Specification

TRAFFIC CONES

Our clients can avail quality Road Safety Cones, widely used in barricading, making parking zones, work zones, controlling and diverting the traffic. These safety cones are made of a fiber with strength larger than the Low Density Poly Ethylene, thus making the cone durable and easy to handle.


Specification

Colour : Fluorescent Red Size : Height – 700 MM Base - 365 x 365 MM Top Width – 60 MM Reflective Band : 4 Inch Reflective Bands Body Material : Semi Flexible UV Protected PE

Plastic Optional Features : Heavy Weighted Rubber Inserted

in Plastic Cone. Weight - Cone Weighted - 1.20 KG Rubber Weighted – 2.70 KG

SPEED BUMPS

It is a speed-reducing feature of road design to slow traffic or reduce through traffic.Our complete range is manufactured using extremely qualitative resources that are procured from most trusted vendors. It is offered in various sizes and material like rubber and plastics.


Black & Yellow color combination for greater visibility

Instant installation with the application of epoxy and bolts

Modular design provides easy installation No need to paint again & again due to pre-color,

hence painting cost is NIL Reflectors & Glass Elements provides better night

vision

Specification

RUBBER SPEED BUMPS\

It is a speed-reducing feature of road design to slow traffic or reduce through traffic.Our complete range is manufactured using extremely qualitative resources that are procured from most trusted vendors. It is offered in various sizes and material like rubber and plastics.


Specification

Black & Yellow color combination for greater visibility

Rubber as a base material helps it in making better grip on the road

Modular design provides easy installation No need to paint again & again due to pre-color,

hence painting cost is NIL Reflectors & Glass Elements provides better night

vision Provides much better comfort for passengers in the

vehicles Any length of Speed Humps is possible as the

design/sections are modular

CORNER PROTECTOR


Specification

Size : 825 x 65 x 65 x 6 MM Colour : Black with Yellow or White Reflective

Sheeting Body Material :- Modified Thermoplastics (Polymer

Rubberized) Fixing : Fixed on the Wall withSix 2” Screws

CORNER PROTECTOR Nimble Technoplast Wide Range Of Road Safety Products

We have with us an efficient team of professionals, who help us to offer extensive range of Corner Protectors. These are manufactured using high grade raw material and are widely demanded in traffic system. Our Corner guards are available in standard and customized options as per the requirements of our clients.

Size: 825 x 65 65 x 6 mm Color: Black with Yellow or White

Reflective Sheeting Body Material: Modified Thermoplastics

(Polymer Rubberized) Fixing: Fixed On the Wall with Six 2'

Screws.

Specification

CAR STOPPER Nimble Technoplast Wide Range Of Road Safety Products

Rubber wheel stopper is designed for stop the car at parking area. They are mainly installed in the parking lots, it could prevent the cars from hitting other barriers.

Made up of recycled rubber with Reinforced Nylon Fiber.

Suitable for all weather condition. Premolded countersunk hole for easy

installation. Color: Black with Yellow reflective strip. Length: 584mm, Height: 127mm, Width:

114mm

Specification

DELINEATORS

The Delineators are suitable for all kinds of roads. Their reflectors give best reflective performance to show the road geometry during day and night making it convenient for drivers and keep them away from road hazards.


Available in Different size with high quality Reflective tape and covered by mash

Available in 50mm dia powder quoted MS pipe with top mounted with 100mm dia reflector and hight 750mm 50, 70 &100mm dia made of good quality MS pipe with powder quoted.

Specification

ELECTRONIC SAFETY DEVICES

Safety light bar has been designed with electronic chip, equipped with rechargeable battery. Four way micro switch is used for flashing red, green & White light. The body of light bar is made of polycarbonate material. Florescent cast Vinyl film is used inside the bar to emit highly visible signals.

Usage Areas:


Traffic Police Highway Petrol Emergency Services Firefighters, Army Security Forces Air Traffic Control Person Parking guide Construction Sites.

ROAD STUDS

Square Road Studs are manufactured from a high impact resistant polycarbonate resin, the inner ribbed contour of the stud is shaped to dissipate tyre impact, increase strength and reduce damage. The tough polycarbonate reflective lens is coated with a superior protective material adding more resistance to abrasion. The result is a marker that demonstrates high-impact strength and holds up longer on today's heavily trafficked roads and motorways.


Size: 120 x 90 x 40 mm Color: Yellow or White Reflective Sheeting Body Material: Plastic STUD – Modified ABS Plastic Reflective panel: Acrylic Reflector. Directional: DUO Directional. Fixing : Two component Epoxy Adhesive.

Specification

ROAD STUDS Nimble Technoplast Wide Range Of Road Safety Products

Its illuminant intensity parameter is 3-4 times the first-class products standard. Its aging resistance capability is 2-3times the engineering project plastics’. Its applicable environment temperature is -40～+65℃。 Application range ：decelerating line, central line, lane line, edge line and so on. Installation：Asphalt road: 1.clean the road 2.put glue on3.put the spike in the installation hole of high-intensity plastic road stud by spike-shooting gun Cement road: 1.drill the hole in the proper place and put the expansion pipe 2.clean the road 3.put glue on 4.thread the screw in the installation hole of high-intensity plastic road stud

High-intensity Plastic A1Type Reflective Technology Parameter : Putting an end to the “shelling” phenomenon：adopting high-intensity plastic（without fill）basal body. Size： 102×90×18.8mm，Color：yellow、white and so on. Avoiding “shelling” phenomenon to the fullest exten ：furnished with installation hole，using steel shooting gun（while on the cement road, you should firstly drill hole and put expansion pipe as well as screw）and adhesive to fix it on the asphalt road. Shorten the construction cycle. You don’t have to set road barrier and let people watch after finish installing and cars could go immediately.

SOLAR ROAD STUDS

solar powered road studs are mainly used for road safety, traffic guidance and to mark traffic hazards. The extra bright flashing LEDs are extremely efficient at warning earlier than usual reflective road studs. Such advanced traffic management and road safety system gives drivers enough time to react adequately in case of emergency.


Specification

Aluminum-alloy shell, transparent plastic shell Solar panel 0.4W One rechargeable battery (1.2V/1,200Ma) Six Super bright LEDs Light intensity and view distance: 8,000 to

10,000mcd and over 800m Color AMBER COLOR, RED, BLUE, GREEN,

WHITE 50 to 60 hours successively after the battery is

fully charged Easy installation, no maintenance

SOLAR ROAD STUDS

Features : Easy installation, no maintenance Saves power, no additional expenses, environmentally friendly, no pollution Solar

energy-based power source Brightness sensitive auto-switch, automatically turns on at night and turns off at dawn , Packaging

: Unit Size: 132 X 122 X 20 MM , Unit Weight


Specifications

Aluminum-alloy shell, transparent plastic shell

Solar panel 0.4W

One rechargeable battery (1.2V/1,200Ma)

PCB with over-charging function

Six Super bright LEDs

Light intensity and view distance: 8,000 to 10,000mcd and over 900m

Frequency or flash rate: 2Hz or according to customers requirements

Working model: Steady lighting or Flashing. Depends on your requirements

Bearable weight:, more then 30 Tons

Color

AMBER COLOR, RED, BLUE, GREEN, WHITE

Working condition

50 to 60 hours successively after the battery is fully charged

Charging time: five to six hours/day

Working temp: --40 degree ---- + 85 degree

Life time: three to five years

SOLAR ROAD STUDS Nimble Technoplast Wide Range Of Road Safety Products

Specifications 1) Aluminum-alloy shell, transparent plastic shell 2) Solar panel 0.4W 3) One rechargeable battery (1.2V/1,200Ma) 4) PCB with over-charging function 5) Six Super bright LEDs 6) Light intensity and view distance: 8,000 to 10,000mcd and over 800m 7) Frequency or flash rate: 2Hz or according to customers requirements 8) Working model: Steady lighting or Flashing. Depends on your requirements 9) Bearable weight: 20 Tons Color AMBER COLOR, RED, BLUE, GREEN, WHITE Working condition 1) 50 to 60 hours successively after the battery is fully charged 2) Charging time: five to six hours/day 3) Working temp: --40 degree ---- + 85 degree 4) Life time: three to five years Feature 1) Easy installation, no maintenance 2) Saves power, no additional expenses, environmentally friendly, no pollution 3) Solar energy-based power source 4) Brightness sensitive auto-switch, automatically turns on at night and turns off at dawn

SOLAR ROAD STUDS Nimble Technoplast Wide Range Of Road Safety Products

Specifications:

Diamensions : 140mm x 129mm , Height - 80mm, Height of Shank – 54mm

Solar Cell : Poly Crystaline silicon / single – crystalline silicon (3v, 75mA)

Storage Battery : Ni –MH 1.2 Volts (1600 mAH)

Light Source : Super luminosity LED blinking at 60 to 70 pulses a minute.

LED Quantity: 6 Pieces / 4 Pieces – Luminosity colors – Red, Green , Blue, White or Yellow (for any choice)

Luminous mode: varying type / constant Type.

Work Time: 108 hours above for varying type and more than 24 hours for constant type (standard luminosity

intensity)

Work temperature: -25 to +75 degree C.

Material of light: Aluminium alloy and polycarbonate.

Resist compression: 30 tons, Water proof grade *IP>67, View distance: 800 Meters

Guarantee period: 12 Months

REFLECTORS

Reflectors are skillfully designed to give the maximum reflection and enhance visibility of vehicles during night or bad light conditions. The high reflection gives the drivers early warning.


Excellent and high quality control Prompt delivery Customer's designs and logo.

Specification

CONVEX MIRROR Nimble Technoplast Wide Range Of Road Safety Products

Specification

The quality Convex Mirrors offered by us are widely appreciated for their features such as perfect finish, smooth surface and wide area coverage on the mirror. Manufactured using quality glass, these mirrors have competitive edge over the existing products because if following features:

Size: 450 mm(180’’), 600 mm (24”) , 800 mm (32”), and 1000 mm (400”) Dia Body Material: Back frame Made of Aluminum or ABS

and mirror made of Unbreakable Polycarbonate Key feature : Stainless material that is Antistain and

antifog. Polluted substance with rain water during rain cleaned naturally.

CONVEX MIRROR Nimble Technoplast Wide Range Of Road Safety Products

Specification

The quality Convex Mirrors offered by us are widely appreciated for their features such as perfect finish, smooth surface and wide area coverage on the mirror. Manufactured using quality glass, these mirrors have competitive edge over the existing products because if following features:

Size: 450 mm(180’’), 600 mm (24”) , 800 mm (32”), and 1000 mm (400”) Dia Body Material: Back frame Made of Aluminum or ABS

and mirror made of Unbreakable Polycarbonate Key feature : Stainless material that is Antistain and

antifog. Polluted substance with rain water during rain cleaned naturally.

ROAD SAFETY JACKET

We are also renowned for offering a wide range of Safety jackets that are of high quality are are popular owing to their reliability features.


High quality polyester material Along with reflector material

Specification

SAFETY FENCE Nimble Technoplast Wide Range Of Road Safety Products

Specification

High visibility Durable polypropylene Reusable Lightweight .

Plastic orange safety fence is available with a variety of staking options for sporting events, crowd control and construction site applications. Installation is faster, easier and less expensive than other heavier products.

SAFETY PRODUCTS Nimble Technoplast Wide Range Of Road Safety Products

TROLLEY CONVEX MIRROR Nimble Technoplast Wide Range Of Road Safety Products

Under trolley convex mirror having flexible handle with led torch. Three trolley wheels provided for easy accessibility for under carriages inspections Body Material: Modified Thermoplastics (Polymer Rubberized)

mirror having 1. 5 mm lens in convex form with strong rubberized border at rim.

Dia: 11”

Specification

Our clients can avail an extensive range of Inspection Mirror, wherein the length of the pole can be extended from 0.5M to 2M. Our range is light in weight and easy to use, unfolded, and assembled. The same pole can be used to view underneath and over the vehicle.

ROAD SIGNS Nimble Technoplast Wide Range Of Road Safety Products

The growth and development of a country depends on its traffic management. In this aspect, there is a pressing need for reliable and effective safety equipment. Therefore, we are engaged in manufacturing and supplying a wide range of Traffic Safety Signage products, in line with the international quality standards.

The sign post is rugged and resistant to different temperatures.

Display frame is in recess which creates a blackout and this will help make visible the road sign on sunny days.

Frames will protect display from rain and other foreign objects.

The programmable LED Video Display make the

sign very universal. These signs can be centrally managed through

dedicated special services on the Internet.

Specification

240 × 250 - Pyramex Safety Caps

200 × 200 - Safety Caps

233 × 216 - Charger Vented Safety Cap

300 × 374 - Safety caps comes in a wide range of colours

Safety Caps

Size - L: 1000mm, H: 800mm, Top width: 120mm, Bottom width: 500mm , Water capacity: 40kg

Cold resistant, hot resistant, anti-impact, durable, with water in it, the buffer elasticity will be

better, without the water, it can be moved easily. The colour is bright and not easy fading, with reflective film, the colour of bucket is brighter and it is also attractive in the night. Yellow, Red, White, Bule are available.

Size - L: 1060mm, H: 500mm, Top width: 80mm, Bottom width: 200mm, Water capacity: 65kg

Traffic Barriers

Size :- L2280 x H1200 x W65mm

Weight - 15 Kg

Anti-UV, fading resistant and no ageing. With reflective stripe, more visible. Interlock

design, interlocked one by one. Yellow, Red, White, Blue, various combination color, high

visibility. The feet can be adjustable in 360 degree.

Size - L1950 x W1000 x H50mm

Weight – 12 Kg

Traffic Barriers

Traffic Barriers Highway Guradrail (Crash Barrier)

Highway guard rail (also highway called crash barrier, W beam) Specification (general) : 4320mm x 310mm x 85mm x 3(4)mm. Profile: Two-beam(W-beam); Thrie-beam.

Post: C channel post, Sigma post, Circular post, Tubular post. Surface treatment : Hot dip galvanizing

460 × 307 - Designed with safety-chain mounting point; Convenient snap-type tool clip

100 × 256 - Heavy Duty Chain Pulley Blocks

318 × 336 - Improved safety, ergonomics and work environment

Safety Chain for Heavy Works It helps lift tools and reduces strain on operators

500 × 365 - Safety Shoes

Safety Shoes

250 × 250 - Safety Shoes

300 × 300 - Safety Shoes and Work Boots

700 × 560 - safety shoes

with waterproof and

breathable membrane`

Safety Gloves

450 × 450 - Safety Gloves

250 × 250 - Safety Gloves

480 × 480 - Electrical Safety

Gloves: Class 00 - 36cm

533 × 424 - We provide Leather gloves for

industrial and construction applications.

SOLAR POWER CHEVRON MARKER

Size - 1)450X600mm,

2)600X800mm

Voltage: DC6V or DC12V Power:2W Solar panel: 8.5V 3W or 17.5V

3W Battery: 6V12AH or 12V8AH Light source: Ultra bright

LED(8000MCD), Various colours available. Frquency:40-

50times/Min. Visual distance:1000M Working time in rainy

days:360hours Inside light control switch, starts in dark

automatically.

249 × 223 - This exit sign includes

built in surge protection

700 × 300 - From illuminated fire

exit

signs to escape lights, our

emergency

lighting

TRAFFIC LIGHTS

Traffic lights are the part of traffic light management. The traffic light also known as traffic signal, stop light, traffic lamp, stop and go lights, robot or semaphore, is a signaling device positioned at a road intersection.



Please Contact :

Mr. S.K. Srivastava C-143, Sector-10, Noida,

U.P., India – 201 301

Phone - +91 - 9810146453

Thank You Have A Nice Day


Documents

Nimble Technoplast3.imimg.com/data3/LI/PD/MY-1133702/cl_nimbletechnoplast.pdf · 2020-01-21 · Light Source : Super luminosity LED blinking at 60 to 70 pulses a minute. LED Quantity: