1
WORLD PUMPS April 2004 www.worldpumps.com 9 Metering pump for small dosing in general industrial applications The 2RB 10 small dosing pump from Viscotec is self-priming and offers performance up to a maximum of 200 l/h of flow and 12 bar of pressure. The metering pump can be utilised to dose in general industrial applications, in the food and drink industry, or in other more specialist sectors such as the chemical or cosmetics industry. With an accuracy of +/- 1%, the 2RB 10 pump can be constructed from a number of different materials, depending upon end user requirements. Options include hastelloy, teflon, and stainless steel. Any parts that come into contact with product are made of high- grade stainless steel. For the stator EPDM, Viton, Chemrez and other materials are available. Temperature resistance up to 200 °C can be specified if so desired. According to the manufacturer, the volumetric pump is particularly suitable for the gentle dosing and conveying of liquids with various viscosities up to the consistency of pasty sticky media. The rotational direction is reversible and the flow rate is proportional to the speed, which can go up to 1000rpm. The recommended drive power is 0.12 kW to 0.37 kW. Various drive systems can be selected to meet the dosing needs of different end users. At the basic level, a variable speed drive with manual variator can be specified, a VFD option (variable frequency drive) is available, and for shot dosing or continuous operation there is program controlled quantity regulation, which utilises a number of electronic aids. The pump can be driven horizontally or vertically, increasing the flexibility of the connection options. Shaft sealing is achieved with a single mechanical seal with rubber bellows and ceramic/carbon seal faces. Also available is PTFE impregnated packing and double mechanical seals with barrier fluid or quench connections for more arduous duties. The new Grindex Tubo is an electrical submersible drainage pump designed for restricted access situations and deep well dewatering applications. The pump can handle solids in suspension up to 8 mm in diameter and liquid temperatures up to 40º C. The motor has a rated output of 3.0 kW, 3-phase 400 V as standard. To ensure robust performance in demanding conditions the pump comes with double mechanical shaft seals with an oil compartment between the seals to prevent the ingress of water. The design also incorporates a cast iron impeller and nitrile rubber diffusers, which should be able to effectively resist wear and tear in demanding environments. In addition, there are also thermo- guards in the stator winding. In normal applications, the Tubo has a maximum head of 19 m. A High Pressure version is also available, however, which enhances the maximum height to over 35 m. This high head capability, combined with a maximum submersion depth of 20 m and a diameter of just 185 mm, makes the Tubo high pressure pump ideal for use in deep well dewatering applications, in sandy ground or in other similarly arduous duties. The discharge connection is on top of the pump with the option of either BSP or NPT threaded connections. New slim line submersible drainage pump The self-priming 2RB 10 small dosing pump from Vicotec has a maximum flow rate capability of 200 l/h and can handle 12 bar of pressure. It is designed for metering applications in general industry and in the food and drink and chemical/cosmetics industries. news product and services The slim line Tubo submersible drainage pump from Grindex AB is designed for demanding applications with limited access. Domestic water pump Stuart Turner Ltd has introduced a new range of Monsoon domestic water pumps rated at 2 bar of pressure, replacing the previously available 1.5 bar pump units. The increase in pressure and flow rate capabilities will ensure that the pump can meet higher duties on domestic water systems, such as boosting showers and other bathroom appliances. The unit is suitable for office, residential, and light commercial installations. The upgraded pump should now be able to handle more demanding applications claim the manufacturers and serve multiple water points. Offered in single and twin head form, the end user can specify control options for either positive or negative head locations. All Monsoon pumps come with a two-year guarantee, are pre- wired and come with flexible hoses to aid installation. Anti- vibration feet, power supply cables and inlet strainers also come as part of the package.

New slim line submersible drainage pump

  • View
    212

  • Download
    0

Embed Size (px)

Citation preview

Page 1: New slim line submersible drainage pump

WORLD PUMPS April 2004 www.worldpumps.com 9

Metering pump for small dosing ingeneral industrial applicationsThe 2RB 10 small dosing pumpfrom Viscotec is self-priming andoffers performance up to amaximum of 200 l/h of flow and12 bar of pressure. The meteringpump can be utilised to dose ingeneral industrial applications,in the food and drink industry, orin other more specialist sectorssuch as the chemical orcosmetics industry.

With an accuracy of +/- 1%, the2RB 10 pump can beconstructed from a number ofdifferent materials, dependingupon end user requirements.Options include hastelloy,teflon, and stainless steel. Anyparts that come into contactwith product are made of high-grade stainless steel. For thestator EPDM, Viton, Chemrez

and other materials areavailable. Temperatureresistance up to 200 °C can bespecified if so desired.

According to the manufacturer,the volumetric pump isparticularly suitable for thegentle dosing and conveying ofliquids with various viscosities upto the consistency of pasty stickymedia. The rotational directionis reversible and the flow rate isproportional to the speed,which can go up to 1000rpm.The recommended drive poweris 0.12 kW to 0.37 kW. Variousdrive systems can be selected tomeet the dosing needs ofdifferent end users. At the basiclevel, a variable speed drive withmanual variator can bespecified, a VFD option (variable

frequency drive) is available, andfor shot dosing or continuousoperation there is programcontrolled quantity regulation,which utilises a number ofelectronic aids.

The pump can be drivenhorizontally or vertically,increasing the flexibility of the

connection options. Shaftsealing is achieved with a singlemechanical seal with rubberbellows and ceramic/carbon sealfaces. Also available is PTFEimpregnated packing anddouble mechanical seals withbarrier fluid or quenchconnections for more arduousduties.

The new Grindex Tubo is anelectrical submersible drainagepump designed for restrictedaccess situations and deep welldewatering applications. Thepump can handle solids insuspension up to 8 mm in

diameter and liquid temperaturesup to 40º C. The motor has arated output of 3.0 kW, 3-phase400 V as standard.

To ensure robust performance indemanding conditions the

pump comes with doublemechanical shaft seals with anoil compartment between theseals to prevent the ingress ofwater. The design alsoincorporates a cast iron impellerand nitrile rubber diffusers,which should be able toeffectively resist wear and tear indemanding environments. Inaddition, there are also thermo-guards in the stator winding.

In normal applications, the Tubohas a maximum head of 19 m. AHigh Pressure version is alsoavailable, however, whichenhances the maximum heightto over 35 m. This high headcapability, combined with amaximum submersion depth of20 m and a diameter of just 185mm, makes the Tubo highpressure pump ideal for use indeep well dewateringapplications, in sandy ground orin other similarly arduous duties.The discharge connection is ontop of the pump with the optionof either BSP or NPT threadedconnections.

New slim line submersibledrainage pump

The self-priming 2RB 10 small dosing pump from Vicotec has a maximum flowrate capability of 200 l/h and can handle 12 bar of pressure. It is designed formetering applications in general industry and in the food and drink andchemical/cosmetics industries.

n e w s p r o d u c t a n d s e r v i c e s

The slim line Tubo submersible drainage pump from Grindex AB is designed fordemanding applications with limited access.

Domestic water pump

Stuart Turner Ltd has introduceda new range of Monsoondomestic water pumps rated at2 bar of pressure, replacing thepreviously available 1.5 barpump units.

The increase in pressure andflow rate capabilities will ensurethat the pump can meet higherduties on domestic watersystems, such as boostingshowers and other bathroomappliances. The unit is suitablefor office, residential, and lightcommercial installations. Theupgraded pump should now beable to handle more demandingapplications claim themanufacturers and servemultiple water points.

Offered in single and twin headform, the end user can specifycontrol options for eitherpositive or negative headlocations.

All Monsoon pumps come witha two-year guarantee, are pre-wired and come with flexiblehoses to aid installation. Anti-vibration feet, power supplycables and inlet strainers alsocome as part of the package.