New Publications Program Standard Title Date Posted Scope · Information technology — Object oriented BioAPI — Part 2: Java implementation (Adopted ISO/IEC 30106-2:2016, first

Browse By Group:

Last updated: December 27, 2017

View All

New Publications | Supplements | Amendments | Errata | Endorsements | Reaffirmations | Withdrawals | Formal Interpretations | Informs & Certification Notices | Previous Reports

New Publications

This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store.Program Standard Title Date Posted ScopeElectrical / Electronics IEEE 844.2-

2017/CSA C293.2-17

Skin effect trace heating of pipelines, vessels, equipment, and structures—Application guide for design, installation, testing, commissioning, and maintenance

12/19/2017 View Detail

Electrical / Electronics C83-17 Communication and power line hardware 12/19/2017 View Detail

Energy ANSI Z21.103-2017

Unvented portable type gas camp heaters for indoor and outdoor use 12/13/2017 View Detail

Energy Z276-18 Liquefied natural gas (LNG) - Production, storage, and handling 12/13/2017 View Detail

Energy ANSI Z21.88-2017/CSA 2.33-

Vented gas fireplace heaters 12/13/2017 View Detail

Page 1 of 32Current Standards Activities

1/1/2018https://standardsactivities.csa.ca/recent_infoupdate.asp

2017

Electrical / Electronics C22.2 NO. 40-17 Junction and pull boxes 12/12/2017 View Detail

Energy N285.7-15 Inspection périodique des systèmes et des composants complémentaires des centrales nucléaires CANDU


Life Sciences Z1220-17 Trousses de secourisme en milieu de travail 12/12/2017 View Detail

Life Sciences Z248-17 Code for tower cranes 12/12/2017 View Detail

Electrical / Electronics CAN/CSA-C22.2 NO. 60335-2-80:17

Household and similar electrical appliances — Safety — Part 2-80: Particular requirements for fans(Adopted IEC 60335-2-80:2015, third edition, 2015-04, with Canadiandeviations)


Electrical / Electronics CAN/CSA-C60079-30-2:17

Explosive atmospheres — Part 30-2: Electrical resistance trace heating — Application guide for design, installation and maintenance (Adopted IEC/IEEE 60079-30-2:2015, first edition, 2015-09, with Canadian deviations)


Life Sciences CAN/CSA-ISO/TS 17665-3:17

Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family andprocessing category for steam sterilization (Adopted ISO/TS 17665-3:2013, first edition, 2013-04-15)



Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34)



Appareils électrodomestiques et analogues — Sécurité — Partie 2-34 : Exigences particulières pour les motocompresseurs(norme binationale avec UL 60335-2-34)


Communications /Information

CAN/CSA-ISO/IEC/IEEE 29119-5:18

Software and systems engineering — Software testing — Part 5: Keyword-Driven Testing (Adopted ISO/IEC/IEEE 29119-5:2016, first edition, 2016-11-15)



CAN/CSA-ISO/IEC 29155-4:18

Systems and software engineering — Information technology project performance benchmarking framework — Part 4: Guidance for datacollection and maintenance (Adopted ISO/IEC 29155-4:2016, first edition, 2016-10-15)




Information technology — Automatic identification and data capture techniques — Part 19: Crypto suite RAMON security services for airinterface communications (Adopted ISO/IEC 29167-19:2016, first edition, 2016-05-15)





CAN/CSA-ISO/IEC 29169:18

Information technology — Process assessment — Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity (Adopted ISO/IEC 29169:2016, first edition, 2016-04-01)




Information technology — Automatic identification and data capture technique — Identifier resolution protocol for multimedia information access triggered by tag-based identification (Adopted ISO/IEC 29177:2016, first edition, 2016-05-01)




Information technology — Web Services Interoperability — WS-I Basic Profile Version 1.1 (Adopted ISO/IEC 29361:2008, first edition, 2008-06-15)




Information technology — Web Services Interoperability — WS-I Attachments Profile Version 1.0 (Adopted ISO/IEC 29362:2008, first edition, 2008-06-15)



CAN/CSA-ISO/IEC TR 29110-5-1-2:18

Ingénierie du logiciel — Profils de cycle de vie pour très petits organismes (TPO) — Partie 5-1-2: Guide de gestion et d'ingénierie:Groupe de profils génériques: Profil basique (norme ISO/CEI TR 29110-5-1-2:2011 adoptée, première édition,2011-05-15)




Information technology — Web Services Interoperability — WS-I Simple SOAP Binding Profile Version 1.0 (Adopted ISO/IEC 29363:2008, first edition, 2008-06-15)




Information technology — Home network resource management —Part 1: Requirements (Adopted ISO/IEC 30100-1:2016, first edition, 2016-04)




Information technology — Home network resource management —Part 2: Architecture (Adopted ISO/IEC 30100-2:2016, first edition, 2016-04)




Information technology — Home network resource management —Part 3: Management application (Adopted ISO/IEC 30100-3:2016, first edition, 2016-04)




Information technology — IT Enabled Services- Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 1: Processreference model (PRM) (Adopted ISO/IEC 30105-1:2016, first edition, 2016-11-15)




Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 2: Process




assessment model (PAM) (Adopted ISO/IEC 30105-2:2016, first edition, 2016-11-15)



Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 3: Measurementframework (MF) and organization maturity model (OMM) (Adopted ISO/IEC 30105-3:2016, first edition, 2016-11-15)




Information technology — IT Enabled Services- Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 4: Terms andconcepts (Adopted ISO/IEC 30105-4:2016, first edition, 2016-11-15)




Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 5: Guidelines(Adopted ISO/IEC 30105-5:2016, first edition, 2016-11-15)




Information technology — Object oriented BioAPI — Part 2: Java implementation(Adopted ISO/IEC 30106-2:2016, first edition, 2016-03-15)




Information technology — Object oriented BioAPI — Part 3: C# implementation (Adopted ISO/IEC 30106-3:2016, first edition, 2016-03-15)




Information technology — Object oriented BioAPI — Part 1:Architecture (Adopted ISO/IEC 30106-1:2016, first edition, 2016-03-15)




Information technology — Biometric presentation attack detection —Part 1: Framework (Adopted ISO/IEC 30107-1:2016, first edition, 2016-01-15)



CAN/CSA-ISO/IEC TR 30114-1:18

Information technology — Extensions of Office Open XML file formats — Part 1: Guidelines (Adopted ISO/IEC TR 30114-1:2016, first edition, 2016-12-15)




Information technology — User interfaces — Voice commands — Part 1: Framework and general guidance (Adopted ISO/IEC 30122-1:2016, first edition, 2016-08-01)




Technologies de l’information — Interfaces utilisateur — Commande vocale — Partie 1: Cadre et conseils généraux (norme ISO/IEC 30122-1:2016 adoptée, première édition, 2016-08-01)


Communications / CAN/CSA-ISO/IEC Information technology — User interfaces — Voice commands — Part 11/30/2017 View Detail



Information 30122-4:18 4: Management of voice command registration(Adopted ISO/IEC 30122-4:2016, first edition, 2016-08-01)


CAN/CSA-ISO/IEC TR 30125:18

Information technology — Biometrics used with mobile devices (Adopted ISO/IEC TR 30125:2016 first edition, 2016-05-01)




Information technology — Information technology sustainability —Energy efficient computing models — Part 1: Guidelines for energy effectiveness evaluation (Adopted ISO/IEC TR 30132-1:2016, first edition, 2016-09-15)




Information technology — Data centres — Key performance indicators — Part 1: Overview and general requirements (Adopted ISO/IEC 30134-1:2016, first edition, 2016-03-15)




Information technology — Data centres — Key performance indicators — Part 2: Power usage effectiveness (PUE)(Adopted ISO/IEC 30134-2:2016, first edition, 2016-04-15)




Information technology — Data centres — Key performance indicators — Part 3: Renewable energy factor (REF)(Adopted ISO/IEC 30134-3:2016, first edition, 2016-04-15)




Governance of information technology — Guidance for principles-based standards in the governance of information technology(Adopted ISO/IEC TR 38504:2016, first edition, 2016-09-15)




Information technology — Mathematical Markup Language (MathML) Version 3.0 2nd Edition (Adopted ISO/IEC 40314:2016, first edition, 2016-03-01)



CAN/CSA-ISO/IEC9995-9:18

Information technology — Keyboard layouts for text and office systems — Part 9: Multi-lingual, multiscript keyboard layouts(Adopted ISO/IEC 9995-9:2016, first edition, 2016-10-01)


Energy ANSI Z83.7-2017/CSA 2.14-2017

Gas-fired construction heaters 11/30/2017 View Detail

Energy ANSI Z21.56-2017/CSA 4.7-2017

Gas-fired pool heaters 11/29/2017 View Detail


CAN/CSA-ISO/IEC TR 15067-3-2:18

Information technology – Home electronic system application model —Part 3-2: GridWise — Interoperability context-setting framework(Adopted ISO/IEC TR 15067-3-2:2016, first edition, 2016-11)


Communications / CAN/CSA-ISO/IEC Information technology — Future keyboards and other input devices 11/29/2017 View Detail



Information TR 15440:18 and entry methods (Adopted ISO/IEC TR 15440:2016, fourth edition, 2016-02-01, corrected version 2016-04-15)



Information technology — Learning, education, and training —Requirements for e-textbooks in education (Adopted ISO/IEC TR 18120:2016, first edition, 2016-08-15)




Information technology — Database languages — SQL TechnicalReports — Part 5: Row Pattern Recognition in SQL (Adopted ISO/IEC TR 19075-5:2016, first edition, 2016-12-15)




Information technology — JPEG Systems — Part 1: Packaging of information using codestreams and file formats(Adopted ISO/IEC TR 19566-1:2016, first edition, 2016-03-15)




Information technologies — JPEG Systems — Part 2: Transport mechanisms and packaging (Adopted ISO/IEC TR 19566-2:2016, first edition, 2016-10-15)




nformation technology — Automatic identification and data capture (AIDC) techniques — Harmonized vocabulary (Adopted ISO/IEC19762:2016, first edition, 2016-02-01) ITechnologies de l'information — Technique automatiques d'identification et de saisie de données (AIDC) — Vocabulaire harmonisé (norme ISO/IEC 19762:2016 adoptée, première édition, 2016-02-01)




Information technology — Service management — Part 12: Guidance on the relationship between ISO/IEC 20000-1:2011 and servicemanagement frameworks: CMMI-SVC (Adopted ISO/IEC TR 20000-12:2016, first edition, 2016-10-01)




Information technology — Data centres — Guidelines on holistic investigation methodology for data centre key performance indicators (Adopted ISO/IEC TR 20913:2016, first edition, 2016-11-15)




Information technology — Multimedia framework (MPEG-21) — Part 22: User Description (Adopted ISO/IEC 21000-22:2016, first edition, 2016-11-15)




Information technology — Security techniques — Information security for supplier relationships — Part 4: Guidelines for security of cloud services (Adopted ISO/IEC 27036-4:2016, first edition, 2016-10-01)


Communications / CAN/CSA-ISO/IEC Information technology — Security techniques — Electronic discovery 11/29/2017 View Detail



Information 27050-1:18 — Part 1: Overview and concepts (Adopted ISO/IEC 27050-1:2016, first edition, 2016-11-01)



Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview (Adopted ISO/IEC TR 29110-1:2016, second edition, 2016-06-15)




Software Engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 2-1: Framework and taxonomy (Adopted ISO/IEC 29110-2-1:2015, first edition, 2015-11-01)




Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 4-1: Profile specifications: Generic profile group(Adopted ISO/IEC 29110-4-1:2011, first edition, 2011-01-15)




Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-1-1: Management and engineering guide: Genericprofile group: Entry profile (Adopted ISO/IEC TR 29110-5-1-1:2012, first edition, 2012-09-15)




Ingénierie du logiciel — Profils de cycle de vie pour très petits organismes (TPO) — Partie 5-1-1: Guide de gestion et d'ingénierie:Groupe de profil générique: Profil d'entrée (norme ISO/CEI TR 29110-5-1-1:2012 adoptée, première édition,2012-09-15)




Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-1-2: Management and engineering guide: Genericprofile group: Basic profile (Adopted ISO/IEC TR 29110-5-1-2:2011, first edition, 2011-05-15)




Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-2-1: Organizational management guidelines (Adopted ISO/IEC TR 29110-5-2-1:2016, first edition, 2016-06-15)




Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-6-1: Systems engineering — Managementand engineering guide: Generic profile group: Entry profile(Adopted ISO/IEC TR 29110-5-6-1:2015, first edition, 2015-12-01)




Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-6-2: Systems engineering — Managementand engineering guide: Generic profile group: Basic profile(Adopted ISO/IEC TR 29110-5-6-2:2014, first edition, 2014-08-15)




Ingénierie des systèmes et du logiciel — Profils de cycle de vie pour les très petits organismes (TPO) — Partie 5-6-2: Ingénierie des




systèmes — Guide de gestion et d’ingénierie: Groupe de profilsgénériques: Profil basique (norme ISO/IEC TR 29110-5-6-2:2014 adoptée, première édition, 2014-08-15)

Life Sciences CAN/CSA-Z900.2.4-17

Tissus oculaires destinés à la transplantation 11/27/2017 View Detail


Ocular tissues for transplantation 11/27/2017 View Detail


Lymphohematopoietic cells for transplantation 11/27/2017 View Detail


Cellules lymphohématopoïétiques destinées à la transplantation 11/27/2017 View Detail


Perfusable organs for transplantation 11/27/2017 View Detail


Organes pleins destinés à la transplantation 11/27/2017 View Detail


Tissues for transplantation 11/27/2017 View Detail


Tissus destinés à la transplantation 11/27/2017 View Detail

Life Sciences CAN/CSA-Z900.1-17

Cells, tissues, and organs for transplantation: General requirements 11/27/2017 View Detail

Life Sciences CAN/CSA-Z900.1-17

Cellules, tissus et organes destinés à la transplantation : exigencesgénérales



Switches for appliances - Part 1-1: Requirements for mechanical switches (Binational standard with UL 61058-1-1)



Interrupteurs pour appareils — Partie 1-1 : Exigences relatives aux interrupteurs mécaniques (norme binationale avec UL 61058-1-1)



Switches for appliances — Part 1-2: Requirements for electronic switches (Binational standard with UL 61058-1-2)


Electrical / Electronics CAN/CSA-C22.2 Interrupteurs pour appareils — Partie 1-2 : Exigences relatives aux 11/27/2017 View Detail



NO. 61058-1-2:17 interrupteurs électroniques (norme binationale avec UL 61058-1-2)

Environment Z5100-17 Nanomatériaux à base de cellulose — Méthodes d’analyse pour la caractérisation


Environment Z5200-17 Nanomatériaux à base de cellulose — Spécification particulière cadre 11/27/2017 View Detail

Electrical / Electronics C22.2 NO. 282-17 Plugs, receptacles, and couplers for electric vehicles(Trinational standard with UL 2251 and NMX-J-678-ANCE-2017)




Information technology — Security techniques — Information security incident management — Part 2: Guidelines to plan and prepare forincident response (Adopted ISO/IEC 27035-2:2016, first edition, 2016-11-01)



CAN/CSA-ISO/IEC/IEEE 8802-1BA:18

Information technology — Telecommunications and informationexchange between systems — Local and metropolitan area networks — Specific requirements — Part 1BA: Audio video bridging (AVB) systems(Adopted ISO/IEC/IEEE 8802-1BA:2016, first edition, 2016-10-15)



CAN/CSA-ISO/IEC/IEEE 8802-1BR:18

Information technology — Telecommunications and informationexchange between systems — Local and metropolitan area networks — Specific requirements — Part 1BR: Virtual bridged local area networks — Bridge port extension (Adopted ISO/IEC/IEEE 8802-1BR:2016, first edition, 2016-10-15)



CAN/CSA-ISO/IEC/IEEE 8802-1Q:18

Information technology — Telecommunications and informationexchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks (Adopted ISO/IEC/IEEE 8802-1Q:2016, first edition, 2016-03-15)



CAN/CSA-ISO/IEC/IEEE 8802-1X:18

Information technology — Telecommunications and informationexchange between systems — Local and metropolitan area networks — Specific requirements — Part 1X: Port-based network access control (Adopted ISO/IEC/IEEE 8802-1X:2013, first edition, 2013-12-01, including adopted amendment 1:2016)




Information technology — Keyboard layouts for text and office systems — Part 9: Multi-lingual, multiscript keyboard layouts(Adopted ISO/IEC 9995-9:2016, first edition, 2016-10-01)


Electrical / Electronics C22.2 NO. 131-17 Type TECK 90 cable 11/23/2017 View Detail



Electrical / Electronics CAN/CSA-C22.2 NO. 61058-1:17

Switches for appliances - Part 1: General requirements(Binational standard with UL 61058-1)


Electrical / Electronics CAN/CSA-C22.2 NO. 61058-1:17

Interrupteurs pour appareils - Partie 1: Exigences générales (norme binationale avec UL 61058-1)




Information technology — Scalable compression and coding ofcontinuous-tone still images — Part 9: Alpha channel coding(Adopted ISO/IEC 18477-9:2016, first edition, 2016-10-15)




Information technology — Automated infrastructure management (AIM) systems — Requirements, data exchange and applications(Adopted ISO/IEC 18598:2016, first edition, 2016-09)




Information technology — Test methods for machine readable travel documents (MRTD) and associated devices — Part 2: Test methods for the contactless interface (Adopted ISO/IEC 18745-2:2016, first edition, 2016-08-15)



CAN/CSA-ISO/IEC/IEEE 18881:18

Information technology — Ubiquitous green community control network — Control and management (Adopted ISO/IEC/IEEE 18881:2016, first edition, 2016-04-15)



CAN/CSA-ISO/IEC/IEEE 18883:18

Information technology — Ubiquitous green community control network — Security (Adopted ISO/IEC/IEEE 18883:2016, first edition, 2016-04-15)




Information technology — Cloud computing — Service levelagreement (SLA) framework — Part 1: Overview and concepts (Adopted ISO/IEC 19086-1:2016, first edition, 2016-09-15)




Information technology — Advanced Message Queuing Protocol(AMQP) v1.0 specification (Adopted ISO/IEC 19464:2014, first edition, 2014-05-01)




Cloud Infrastructure Management Interface (CIMI) Model and RESTful HTTP-based Protocol — An Interface for Managing Cloud Infrastructure (Adopted ISO/IEC 19831:2015, first edition, 2015-05-01)




Information technology — TLS specification for storage systems (Adopted ISO/IEC 20648:2016, first edition, 2016-03-01)




Information technology — Open data protocol (OData) v4.0 Part 1: Core (Adopted ISO/IEC 20802-1:2016, first edition, 2016-12-15)


Communications / CAN/CSA-ISO/IEC Information technology — Open data protocol (OData) v4.0 Part 2: 11/22/2017 View Detail



Information 20802-2:18 OData JSON Format (Adopted ISO/IEC 20802-2:2016, first edition, 2016-12-15)



Information technology — Multimedia framework (MPEG-21) — Part 20: Contract Expression Language (Adopted ISO/IEC 21000-20:2016, second edition, 2016-12-15)




Information technology — Multimedia application format (MPEG-A) —Part 15: Multimedia preservation application format(Adopted ISO/IEC 23000-15:2016, first edition, 2016-01-15)




Information technology — MPEG systems technologies — Part 7: Common encryption in ISO base media file format files (Adopted ISO/IEC 23001-7:2016, third edition, 2016-02-15)




Information technology — MPEG systems technologies — Part 8: Coding-independent code points (Adopted ISO/IEC 23001-8:2016, second edition, 2016-05-01)




Information technology — MPEG systems technologies — Part 9: Common encryption of MPEG-2 transport streams(Adopted ISO/IEC 23001-9:2016, second edition, 2016-08-01)




Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC)(Adopted ISO 23003-2:2010, first edition, 2010-10-01, including adopted amendment 1:2015, amendment 2:2015, amendment 3:2015, amendment 4:2016 and amendment 5:2016)




Information technology — Media context and control — Part 1: Architecture (Adopted ISO/IEC 23005-1:2016, third edition, 2016-07-15)




Information technology — Media context and control — Part 2: Control information (Adopted ISO/IEC 23005-2:2016, third edition, 2016-31-15)




Information technology — Media context and control — Part 3: Sensory information (Adopted ISO/IEC 23005-3:2016, third edition, 2016-07-01)




Information technology — Media context and control — Part 4: Virtual world object characteristics (Adopted ISO/IEC 23005-4:2016, third edition, 2016-03-15)




Information technology — Media context and control — Part 5: Data formats for interaction devices




(Adopted ISO/IEC 23005-5:2016, third edition, 2016-03-15)



Information technology — Media context and control — Part 6: Common types and tools (Adopted ISO/IEC 23005-6:2016, third edition, 2016-03-15)




Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: Reference software for high efficiency video coding (Adopted ISO/IEC 23008-5:2017, second edition, 2017-02)



CAN/CSA-ISO/IEC/IEEE 24748-4:18

Systems and software engineering — Life cycle management — Part 4: Systems engineering planning (Adopted ISO/IEC/IEEE 24748-4:2016, first edition, 2016-05-15)




Information technology — Security techniques — A framework for identity management — Part 3: Practice(Adopted ISO/IEC 24760-3:2016, first edition, 2016-08-01)




Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pictograms, icons and symbols for use with biometric systems — Part 1: General principles(Adopted ISO/IEC 24779-1:2018, first edition, 2016-04-15)




Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of system and software product quality(Adopted ISO/IEC 25023:2016, first edition, 2016-06-15)




Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for Usability — Evaluation Report (Adopted ISO/IEC 25066:2016, first edition, 2016-06-15)




Identification cards — Integrated circuit card authentication protocols — Part 1: Protocol for Lightweight Authentication of Identity (Adopted ISO/IEC 25185-1:2016, first edition, 2016-01-15)




Software and systems engineering — Tools and methods for product line requirements engineering (Adopted ISO/IEC 26551:2016, second edition, 2016-05-01)




Software and systems engineering — Methods and tools for variability mechanisms in software and systems product line (Adopted ISO/IEC 26557:2016, first edition, 2016-12-15)


Communications / CAN/CSA-ISO/IEC Information technology — Security techniques — Sector-specific 11/22/2017 View Detail



Information 27009:18 application of ISO/IEC 27001 — Requirements(Adopted ISO/IEC 27009:2016, first edition, 2016-06-15)



Information technology — Security techniques — Network security —Part 6: Securing wireless IP network access (Adopted ISO/IEC 27033-6:2016, first edition, 2016-06-01)




Information technology — Security techniques — Application security — Part 6: Case studies (Adopted ISO/IEC 27034-6:2016, first edition, 2016-10-01)




Information technology — Security techniques — Information security incident management — Part 1: Principles of incident management(Adopted ISO/IEC 27035-1:2016, first edition, 2016-11-01)



CAN/CSA-ISO/IEC14543-3-11:18

Information technology — Home electronic system (HES) architecture — Part 3-11: Frequency modulated wireless short-packet (FMWSP) protocol optimised for energy harvesting — Architecture and lower layer protocols (Adopted ISO/IEC 14543-3-11:2016, first edition, 2016-02)




Information technology — Telecommunications and informationexchange between systems — Magnetic field area network (MFAN) —Part 4: Security Protocol for Authentication (Adopted ISO/IEC 15149-4:2016, first edition, 2016-01-15)




Information technology — JPEG 2000 image coding system: Core coding system (Adopted ISO/IEC 15444-1:2016, third edition, 2016-10-15)




Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 4: Application interfacecommands for battery assist and sensor functionality (Adopted ISO/IEC 15961-4:2016, first edition, 2016-08-01)




Information technology — Relayed multicast protocol: Specification for simplex group applications (Adopted ISO/IEC 16512-2:2016, third edition, 2016-04-01)




Information technology — Open Virtualization Format (OVF)specification (Adopted ISO/IEC 17203:2011, first edition, 2011-12-01)




Information technology — Security techniques — Testing methods for the mitigation of non-invasive attack classes against cryptographic modules (Adopted ISO/IEC 17825:2016, first edition, 2016-01-15)






Information technology — Cloud Data Management Interface (CDMI) (Adopted ISO/IEC 17826:2016, second edition, 2016-07-15)




Web Services for Management (WS-Management) Specification (Adopted ISO/IEC 17963:2013, first edition, 2013-02-01)




Information technology — Real time locating systems — Test and evaluation of localization and tracking systems (Adopted ISO/IEC 18305:2016, first edition, 2016-11-01)




Identification cards — ICC-managed devices — Part 3: Organization, security and commands for interchange(Adopted ISO/IEC 18328-3:2016, first edition, 2016-10-15)




Information technology — Security techniques — Cryptographic algorithms and security mechanisms conformance testing(Adopted ISO/IEC 18367:2016, first edition, 2016-12-15)




Information technology — Scalable compression and coding ofcontinuous-tone still images — Part 2: Coding of high dynamic range images(Adopted ISO/IEC 18477-2:2016, first edition, 2016-07-15)




Information technology — Scalable compression and coding ofcontinuous- tone still images — Part 8: Lossless and near-lossless coding(Adopted ISO/IEC 18477-8:2016, first edition, 2016-10-15)


Electrical / Electronics IEEE 844.1-2017/CSA C22.2 NO. 293.1-17

Skin effect trace heating of pipelines, vessels, equipment, and structures—general, testing, marking, and documentationrequirements



Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-10: Particular requirements for hand-held mixers (Binational standard with UL 62841-2-10)



Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 2-10 : Exigences particulières pour les mélangeurs manuels (norme binationale avec UL 62841-2-10)


Electrical / Electronics CAN/CSA-C61427-1:17

Secondary cells and batteries for renewable energy storage —General requirements and methods of test — Part 1: Photovoltaic off-grid application (Adopted IEC 61427-1:2013, first edition, 2013-04, with Canadian deviations)Accumulateurs pour le stockage de l’énergie renouvelable —




Exigences générales et méthodes d’essais — Partie 1 : Applicationsphotovoltaïques hors réseaux (norme IEC 61427-1:2013 adoptée, première édition, 2013-04, avec exigences propres au Canada)

Electrical / Electronics C866-17 Performance of LED luminaires 11/10/2017 View Detail

Electrical / Electronics CAN/CSA-E60730-2-6:17

Automatic electrical controls — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements(Adopted IEC 60730-2-6:2015, third edition 2015-04, with Canadiandeviations)


Energy ANSI Z21.5.1-2017/CSA 7.1-2017

Gas clothes dryers, volume I, type 1 clothes dryers 11/8/2017 View Detail

Electrical / Electronics CAN/CSA-E60730-2-8:17

Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (Adopted IEC 60730-2-8:2000, edition 2:2000 consolidated with amendment 1:2002 and amendment 2:2015, with Canadiandeviations) | Dispositifs de commande électrique automatiques à usage domestique et analogue - Partie 2-8: Règles particulières pour les électrovannes hydrauliques, y compris les prescriptions mécaniques (norme IEC 60730-2-8:2000 adoptée, édition 2:2000 consolidée par l'amendement 1:2002 et l'amendement 2:2015, avec exigences propres au Canada)


Energy ANSI Z83.19-2017/CSA 2.35-2017

Gas-fired high-intensity infrared heaters 11/6/2017 View Detail

Electrical / Electronics C22.2 NO. 56-17 Flexible metal conduit and liquid-tight flexible metal conduit 11/6/2017 View Detail

Energy B138.1-17/B138.2-17

Appareils de combustion au mazout portatifs — Exigences relatives aux équipements assemblés en usine / Exigences relatives àl´installation


Life Sciences B701-17 Organisations favorisant et appuyant les aidants naturels 11/6/2017 View Detail

Life Sciences CAN/CSA-ISO/TS 16775:17

Packaging for terminally sterilized medical devices — Guidance on the application of ISO 11607-1 and ISO 11607-2 (Adopted ISO technical specification 16775:2014, first edition, 2014-05-15)



CAN/CSA-ISO/IEC TS 17961:18

Information technology — Programming languages, their environments and system software interfaces — C secure coding rules




(Adopted ISO/IEC TS 17961:2013, first edition, 2013-11-15, including adopted technical corrigendum 1:2016)


CAN/CSA-ISO/IEC TS 18661-5:18

Information technology — Programming languages, their environments, and system software interfaces — Floating-pointextensions for C — Part 5: Supplementary attributes (Adopted ISO/IEC TS 18661-5:2016, first edition, 2016-08-15)




Information technology — Metamodel framework for interoperability (MFI) — Part 13: Metamodel for form design registration(Adopted ISO/IEC TS 19763-13:2016, first edition, 2016-12-01)




Systems and software engineering — Life cycle management — Part 1: Guidelines for life cycle management (Adopted ISO/IEC TS 24748-1:2016, first edition, 2016-05-01)




Information technology — Process reference model (PRM) forinformation security management (Adopted ISO/IEC TS 33052:2016, first edition, 2016-06-15)




Information technology — Process assessment — Process capability assessment model for information security management(Adopted ISO/IEC TS 33072:2016, first edition, 2016-07-15, corrected version 2016-09-01)




Information Technology — W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition) (Adopted ISO/IEC 40210:2011, first edition, 2011-09-01)




Information Technology — W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition) (Adopted ISO/IEC 40220:2011, first edition, 2011-09-01)




Information Technology — W3C SOAP Message TransmissionOptimization Mechanism (Adopted ISO/IEC 40230:2011, first edition, 2011-09-11)




Information Technology — W3C Web Services Addressing 1.0 — Core

(Adopted ISO/IEC 40240:2011, first edition, 2011-09-11)




Information Technology — W3C Web Services Addressing 1.0 —SOAP Binding (Adopted ISO/IEC 40250:2011, first edition, 2011-09-01)




Information Technology — W3C Web Services Addressing 1.0 —Metadata




(Adopted ISO/IEC 40260:2011, first edition, 2011-09-01)



Information Technology — W3C Web Services Policy 1.5 —Framework (Adopted ISO/IEC 40270:2011, first edition, 2011-09-01)




Information Technology — W3C Web Services Policy 1.5 —Attachment (Adopted ISO/IEC 40280:2011, first edition, 2011-09-01)


Electrical / Electronics C22.2 NO. 37-17 Decorative lighting products 10/31/2017 View Detail

Life Sciences Z150.3-17 Safety code on articulating boom cranes 10/31/2017 View Detail

Life Sciences Z151-17 Concrete pumps and placing booms 10/31/2017 View Detail

Life Sciences Z1630-17 Paramédecine communautaire : cadre d’application pour l’élaboration d’un programme


Life Sciences Z91-17 Health and safety code for suspended equipment operations 10/31/2017 View Detail



Identification cards - Integrated circuit cards - Part 15: Cryptographic information application (Adopted ISO/IEC 7816-15:2016, second edition, 2016-06-15)




Identification cards - Integrated circuit cards - Part 8: Commands and mechanisms for security operations (Adopted ISO/IEC 7816-8:2016, third edition, 2016-11-01)




Identification cards - Integrated circuit cards - Part 6: Interindustry data elements for interchange (Adopted ISO/IEC 7816-6:2016, third edition, 2016-06-15)




Information technology - Database languages - SQL - Part 1: Framework (SQL/Framework) (Adopted ISO/IEC 9075-1:2061, fifth edition, 2016-12-15)




Information technology - Database languages - SQL - Part 10: Object language bindings (SQL/OLB) (Adopted ISO/IEC 9075-10:2016, fourth edition, 2016-12-15)




Information technology - Document Schema Definition Languages (DSDL) - Part 3: Rule-based validation - Schematron(Adopted ISO/IEC 19757-3:2016, second edition, 2016-01-15)




Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision




(Adopted ISO/IEC 14443-3:2016, third edition, 2016-06-01, correctedversion 2016-09-01 + amendment 1:2016 to ISO/IEC 14443-3:2016)



Information technology - Relayed Multicast Control Protocol (RMCP) -Framework (Adopted ISO/IEC 16512-1:2016, second edition, 2016-04-01)




Identification cards - Optical memory cards Part 5: Data format for information interchange for applications using ISO/IEC 11694-4(Adopted ISO/IEC 11694-5:2014, second edition, 2014-11-01)




Information technology — Biometric sample quality — Part 1:Framework (Adopted ISO/IEC 29794-1:2016, second edition 2016-01-15,corrected version 2016-09-15)


Energy N287.2-17 Material requirements for concrete containment structures for nuclear power plants


Energy N287.7-17 In-service examination and testing requirements for concrete containment structures for nuclear power plants


Life Sciences Z1600-17 Programme de gestion des urgences et de la continuité 10/31/2017 View Detail

Construction Products and Materials

B64.10-17/B64.10.1-17

Sélection et installation des dispositifs antirefoulement / Entretien et mise à l'essai à pied d'oeuvre des dispositifs antirefoulement




Information technology - Security techniques - Hash-functions - Part 1: General (Adopted ISO/IEC 10118-1:2016, third edition, 2016-10-15)




Identification cards - Test methods - Part 6: Proximity cards (Adopted ISO/IEC 10373-6:2016, third edition, 2016-07-15)




Information technology - Database languages - SQL multimedia and application packages - Part 1: Framework (Adopted ISO/IEC 13249-1:2016, fourth edition, 2016-06-01)




Identification cards - Contactless integrated circuit cards - Proximity cards - Part 1: Physical characteristics (Adopted ISO/IEC 14443-1:2016, third edition, 2016-03-15)




Identification cards - Contactless integrated circuit cards - Proximity cards - Part 2: Radio frequency power and signal interface(Adopted ISO/IEC 14443-2:2016, third edition, 2016-07-15)



CAN/CSA-ISO/IEC14651:18

Information technology - International string ordering and comparison -Method for comparing character strings and description of the common




template tailorable ordering (Adopted ISO/IEC 14651:2016, fourth edition, 2016-02-15, corrected version 2016-05-01)


CAN/CSA-ISO/IEC14651:18

Technologies de l'information - Classement international et comparaison de chaînes de caractères - Méthode de comparaison de chaînes de caractères et description du modèle commun et adaptable d'ordre de classement (norme ISO/IEC 14651:2016 adoptée, quatrième édition, 2016-02-15)




Information technology - Security techniques - Digital signatures with appendix - Part 3: Discrete logarithm based mechanisms(Adopted ISO/IEC 14888-3:2016, third edition, 2016-03-15)




Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols(Adopted ISO/IEC 15416:2016, second edition, 2016-12-15)




Information technology - Automatic identification and data capture techniques - GS1 application identifiers and ASC MH10 data identifiers and maintenance (Adopted ISO/IEC 15418:2016, third edition, 2016-03-01)




Information technology - Security techniques - Cryptographic techniques based on elliptic curves - Part 1: General(Adopted ISO/IEC 15946-1:2016, third edition, 2016-07-01)




Information technology - Security techniques - Information security management systems - Overview and vocabulary (Adopted ISO/IEC 27000:2016, fourth edition, 2016-02-15)




Technologies de l’information — Techniques de sécurité — Systèmes de gestion de sécurité de l’information — Vue d’ensemble etvocabulaire(norme ISO/IEC 27000:2016 adoptée, quatrième édition, 2016-02-15)



CAN/CSA-ISO/IEC27004-18

Information technology — Security techniques — Information security management — Monitoring, measurement, analysis and evaluation (Adopted ISO/IEC 27004:2016, second edition, 2016-12-15)




Information technology — Security techniques — Code of practice for information security controls based on ISO/IEC 27002 fortelecommunications organizations (Adopted ISO/IEC 27011:2016, second edition, 2016-12-01)




Information technology - Database languages - SQL - Part 11: Information and definition schemas (SQL/Schemata)




(Adopted ISO/IEC 9075-11:2016, fourth edition, 2016-12-15)



Information technology - Database languages - SQL - Part 13: SQL routines and types using the Java TM programming language(SQL/JRT) (Adopted ISO/IEC 9075-13:2016, fourth edition, 2016-12-15)




Information technology - Database languages - SQL - Part 14: XML-related specifications (SQL/XML) (Adopted ISO/IEC 9075-14:2016, fifth edition, 2016-12-15)




Information technology - Database languages - SQL - Part 2:Foundation (SQL/Foundation) (Adopted ISO/IEC 9075-2:2016, fifth edition, 2016-12-15)




Information technology - Database languages - SQL - Part 3: Call-Level Interface (SQL/CLI) (Adopted ISO/IEC 9075-3:2016, fifth edition, 2016-12-15)




Information technology - Database languages - SQL - Part 4:Persistent stored modules (SQL/PSM) (Adopted ISO/IEC 9075-4:2016, sixth edition, 2016-12-15)




Information technology - Database languages - SQL - Part 9:Management of External Data (SQL/MED) (Adopted ISO/IEC 9075-9:2016, fourth edition, 2016-12-15)


Quality / Business Management

PLUS 9001 (5th ed. pub. 2017)

The ISO 9000 essentials: A practical handbook for implementing the ISO 9000 family of standards


Electrical / Electronics CAN/CSA-C22.2 NO. 250.13-17

Light emitting diode (LED) equipment for lighting applications 10/25/2017 View Detail

Electrical / Electronics CAN/CSA-C22.2 NO. 250.13-17

Appareillages à diodes électroluminescentes (DEL) pour applications d'éclairage



CAN/CSA-IEC 62443-2-1:17

Industrial communication networks — Network and system security —Part 2-1: Establishing an industrial automation and control system security program (Adopted IEC 62443-2-1:2010, first edition, 2010-11)Réseaux industriels de communication — Sécurité dans les réseaux et les systèmes — Partie 2-1 : Établissement d’un programme desécurité pour les systèmes d’automatisation et de commande industrielles (norme IEC 62443-2-1:2010 adoptée, première édition,2010-11)





CAN/CSA-IEC/TR 62443-2-3:17

Security for industrial automation and control systems — Part 2-3: Patch management in the IACS environment(Adopted IEC technical report 62443-2-3:2015, first edition, 2015-06)



CAN/CSA-IEC/TR 62443-3-1:17

Industrial communication networks — Network and system security —Part 3-1: Security technologies for industrial automation and control systems(Adopted IEC technical report 62443-3-1:2009, first edition, 2009-07)



CAN/CSA-IEC62443-3-3:17

Industrial communication networks — Network and system security —Part 3-3: System security requirements and security levels(Adopted IEC 62443-3-3:2013, first edition, 2013-08)



CAN/CSA-IEC/TS 62443-1-1:17

Industrial communication networks — Network and system security —Part 1-1: Terminology, concepts and models (Adopted IEC technical specification 62443-1-1:2009, first edition,2009-07)


Electrical / Electronics C22.2 NO. 4248.1-17

Fuseholders — Part 1: General requirements (Trinational standard with UL 4248-1 and NMX-J-009/4248/1-ANCE)


Energy AHRI 310/380-2017/CSA C744-17

Climatiseurs et thermopompes monoblocs(norme binationale avec AHRI 310/380)


Energy ANSI Z21.89-2017/CSA 1.18-2017

Outdoor cooking specialty gas appliances 10/18/2017 View Detail

Electrical / Electronics C22.2 NO. 204-17 Line isolation monitors 10/18/2017 View Detail


Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor(Binational standard with UL 60335-2-89)



Appareils électrodomestiques et analogues - Sécurité - Partie 2-89 : Règles particulières pour les appareils de réfrigération à usage commercial avec une unité de fluide frigorigène ou un compresseur incorporés ou à distance (norme binationale avec UL 60335-2-89)


Supplements



Supplements are issued periodically for some standards. This section lists those recently published.Program Standard Title Date Posted Scope

No activity to report

Amendments

Amendments are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register NowProgram Standard Title Date Posted ScopeElectrical / Electronics C22.2 NO. 248.12-

11 (R2016) Low-voltage fuses - Part 12: Class R fuses (Tri-national standard, with UL 248-12 and NMX-J-009/248/12-ANCE)

Revised Cover, copyright page, Preface, Clause 5.3, and Table A

12/21/2017

Electrical / Electronics Amendment 1:2018 to CAN/CSA-C22.2 No. 60601-2-10:14

Medical electrical equipment — Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulatorsAppareils électromédicaux — Partie 2-10 : Exigences particulières pour la sécuritéde base et les performances essentielles des stimulateurs de nerfs et de muscles

12/21/2017

Electrical / Electronics C22.2 NO. 184.1-15, Update No. 1

Solid-state dimming controls (Bi-national standard with UL 1472)Revised Cover, copyright page, Clauses 5.2.2.3, 5.2.3.2, 5.2.3.3, 5.2.3.5, 5.10.2, and 7.1.8, Tables 13, 14, 15, and Figures 4 and 6New Clause 7.1.8.1

12/12/2017

Energy N292.5-11(C2016)

Ligne directrice sur l’exemption ou la libération du contrôle réglementaire des matières contenant ou susceptibles de contenir des substances nucléaires Articles 2, 3, 5.1.3, 7.2.1, 7.6.3, 7.6.4, 8.1.3, 8.3.2, 8.3.3 et A.2Annexes D et E

12/7/2017


CAN/CSA-A3000-13, Update No. 5

Cementitious materials compendiumRevised A3001-13: Clause 4.1 and Tables 5, 9, and A.3A3004-C8-13: Clauses 1.1, 3, 4.2, 5.7.1, 5.7.1.1, and 7.1Deleted A3004-C8-13: Clauses 1.2, 1.3, 5.1.2, 5.6.2, 5.6.3, 5.7.2, 5.7.2.1, and 5.7.2.2

12/1/2017


CAN/CSA-A3000-13, Mise à jour no5

Compendium des matériaux liantsModification A3001-13 : article 4.1 et tableaux 5, 9 et A.3A3004-C8-13 : articles 1.1, 3, 4.2, 5.7.1, 5.7.1.1 et 7.1

12/1/2017



Abrogation A3004-C8-13 : articles 1.2, 1.3, 5.1.2, 5.6.2, 5.6.3, 5.7.2, 5.7.2.1 et 5.7.2.2

Energy N285.7-15, Update No. 1

Periodic inspection of CANDU nuclear power plant balance of plant systems and componentsClauses 3, 4.5, 4.6.1, 5.2.6, 5.2.8, 7.3.1, 7.6, 7.8, 7.8.1, 7.8.2, 7.8.3, 7.8.4, 10.3.2.2, A.1, C.3, D.3, D.4.2, D.5.1, D.6.2.1, and D.7.2.1Tables 1, 3, C.1, D.1A, D.1C, D.1E, D.2B, D.2C, D.2D, D.2E, D.4B, D.4C, D.5B, D.5C, D.6A, D.7A, D.7B, and D.7C

11/23/2017

Electrical / Electronics C22.2 No. 29-15 Panelboards and enclosed panelboardsRevision to Clauses 5.15.3, 6.3, 6.4, and 7.5.1Figure 2

11/15/2017

Electrical / Electronics Amendment 1:2017 toCAN/CSA-E60730-1:15

Automatic electrical controls — Part 1: General requirements (IEC 60730-1:2013, MOD)Dispositifs de commande électrique automatiques — Partie 1 : Exigencesgénérales(IEC 60730-1:2013, MOD)

11/6/2017

Energy N293-12 (R2017), Update No. 1

Fire protection for nuclear power plantsRevised Clauses 2, 6.8.4.4, 8.2.3.4, 8.3.4.1, 8.3.4.2, 10.1.4, 10.3.2, 10.4.3, 10.5.1,10.5.2, 10.5.3, 10.6.2, 10.7.4, 10.8.2, 10.8.3, A.6.8.1.4(b), A.6.8.1.4(c),A.6.8.4.4, A.7.3.1.1.3, A.8.2.3.4.3, A.8.3.4.1, A.10.1.4, A.10.8.3(a), and A.10.8.3New 10.4.2.1, 10.4.2.2, A.10.4.2.2, A.10.4.3, A.10.5.1, A.10.5.3, and A.10.7.4Deleted A.10.8.2

11/6/2017

Electrical / Electronics C22.2 No. 178.2-04 (R2014), Update No. 1

Requirements for manually operated generator transfer panelsRevised Clauses 6.1 and 6.9New Clauses 5.9.6 and 6.8A

11/6/2017

Electrical / Electronics CAN/CSA-C22.2 No. 60079-26:16, Update No. 1 /Mise à jour nº 1

Explosive atmospheres — Part 26: Equipment with Equipment Protection Level (EPL) Ga (IEC 60079-26:2014, MOD)Atmosphères explosives — Partie 26 : Matériel d’un niveau deprotection dumatériel (EPL) Ga (IEC 60079-26:2014, MOD)

Revise Clause 4 / Article 4

11/6/2017


Amendment 1:2018 to CAN/CSA-ISO/IEC

Information technology — MPEG systems technologies — Part 11: Energy-efficient media consumption (green metadata) AMENDMENT 1: Carriage of green metadata in an HEVC SEI

11/1/2017



23001-11:16 message(ISO/IEC 23001-11:2015, IDT)


Amendment 3:2018 to CAN/CSA-ISO/IEC23003-1:08

Information technology — MPEG audio technologies — Part 1: MPEG SurroundAMENDMENT 3: MPEG Surround extension for 3D Audio(ISO/IEC 23003-1:2007, IDT)

11/1/2017



Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audioAMENDMENT 2: MPEG-H 3D Audio File Format Support(ISO/IEC 23008-3:2015, IDT)

11/1/2017



Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audioAMENDMENT 4: Carriage of system data(ISO/IEC 23008-3:2015, IDT)

11/1/2017


S406-16, Update No. 1

Specification of permanent wood foundations for housing and small buildingsClauses 5.7 and 5.11Tables 3A, 3B, 5A, 5B, 5C, 5D, 5E, 5F, 5G, 5H, 5I, 5J, 5K, 5L, 10A, 10B, 10C, 10D, 10E, 10F, 10G, 10H, 10I, 10J, 10K, 10L, and A.12

10/31/2017

Electrical / Electronics C22.2 No. 76-14, Update No. 1

SplittersClause 6.5.1

10/31/2017



Information technology — Learning, education and training —Metadata for learning resources — Part 3: Basic application profile (ISO/IEC 19788-3:2011, IDT)

10/31/2017



Information technology — Generic coding of moving pictures and associated audio information — Part 1: SystemsAMENDMENT 1: Delivery of timeline for external data(ISO/IEC 13818-1:2015, IDT)

10/31/2017



Information technology — Generic coding of moving pictures and associated audio information — Part 1: SystemsAMENDMENT 2: Carriage of layered HEVC(ISO/IEC 13818-1:2015, IDT)

10/31/2017



Information technology — Generic coding of moving pictures and associated audio information — Part 1: SystemsAMENDMENT 3: Carriage of green metadata in MPEG2 systems(ISO/IEC 13818-1:2015, IDT)

10/31/2017





Information technology — Generic coding of moving pictures and associated audio information — Part 1: SystemsAMENDMENT 4: New profiles and levels for MPEG4 audio descriptor(ISO/IEC 13818-1:2015, IDT)

10/31/2017



Information technology — Generic coding of moving pictures and associated audio information — Part 1: SystemsAMENDMENT 5: Carriage of MPEGH 3D audio over MPEG2 systems(ISO/IEC 13818-1:2015, IDT)

10/31/2017



Information technology — Generic coding of moving pictures and associated audio information — Part 1: SystemsAMENDMENT 6: Carriage of Quality Metadata in MPEG-2 Systems(ISO/IEC 13818-1:2015, IDT)

10/31/2017

Electrical / Electronics C22.2 No. 198.2-15, Update No. 1

Sealed wire connector systems (Tri-national standard, with UL 486D and NMX-J-519-ANCE)Revised Cover, Copyright page, Preface, Clauses 1.1, 1.3, 2.2, 2.2.4, 4.2, 9.2.3,and 9.2.9.1 and Tables 1 and 2New Clauses 1.4, 4.3–4.5, 7.9, 7.10, 8.9, 8.10, 9.2.9.2, 9.9, 9.10, and 10.3 d)–g)

10/25/2017


Amendment 2:2018 to CAN/CSA-ISO/IEC10646:15

Information technology - Universal coded character set (UCS) -Amendment 2: Bhaiksuki, Marchen, Tangut and other characters(Adopted amendment 2:2016 to ISO/IEC 10646:2014)

10/18/2017

Electrical / Electronics CAN/CSA-C22.2 No. 62841-2-9:16, Update No. 1

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-9: Particular requirements for hand-held tappers and threadersRevised Title page, copyright page, Contents, Preface, IEC Clauses 2 and K.18.8, andIEC Table 4

10/18/2017

Electrical / Electronics CAN/CSA-C22.2 No. 62841-2-9:16, Mise à jour no 1

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 2-9 : Exigences particulières pour les taraudeuses et les fileteuses portativesModification Page titre, préface, article K.18.8 de IEC et tableau 4 de IEC

10/18/2017

Electrical / Electronics C22.2 NO. 107.3-14, Update No. 1

Uninterruptible power systems (Bi-national standard, with UL 1778)Revised Cover, Copyright page, Preface, Clauses 1.1.2, 1.1.101, 1.5, 1.5.107,AAA.8.11, III.1, NNN.1, NNN.3.3.2, and NNN.5.2, Tables 4.5.3.101A and

10/18/2017



AAA.8.3, and Annex CCCNew Clause NNN.3.1.3 and Figure NNN.2

Electrical / Electronics C22.2 No. 177-13, Update No. 1

Clock-operated switchesTables 10 and 11

10/18/2017

Errata

Errata are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register NowProgram Standard Title Date Posted ScopeEnergy B149.3-15, Update

No. 1 Code for the field approval of fuel-related components on appliances and equipmentRevised Clause 9.4.1

12/15/2017

Energy N288.1-14, Mise à jour no 2

Guide de calcul des limites opérationnelles dérivées de matières radioactives dans les effluents gazeux et liquides durant l’exploitation normale des installations nucléairesModification L’articles B.1.2.3, B.1.2.4, B.1.2.6, B.1.4.3, B.1.4.4, B.1.4.5, B.1.4.6, B.2.3.3,B.2.3.4, et Tableaux A.3, A.4a, A.4b, A.4c, A.4d, A.4e, A.4f, A.5b, A.5c, A.5d,A.5e, A.6a, A.7a, A.7b, A.8a, A.8b, A.8c, A.8d, A.8e, A.8f, A.11a, A.11b, A.12,A.13a, A.13b, A.14, A.15, A.21a, A.23, A.25b, A.25d, A.25e, A.25f, A.27, A.29a,B.1, B.2, et B.4.

12/1/2017

Electrical / Electronics CAN/CSA-C746-17

Energy performance rating for large and single packaged vertical air conditioners and heat pumpsErrata to Clause 6.1

11/29/2017

Electrical / Electronics CAN/CSA-C746-17

Évaluation des performances énergétiques des climatiseurs et des thermopompes de grande puissance et verticaux monoblocsErrata to Article 6.1

11/29/2017

Energy N288.1-14, Update No. 2

Guidelines for calculating derived release limits for radioactive material in airborne and liquid effluents for normal operation of nuclear facilitiesRevised Clauses B.1.2.3, B.1.2.4, B.1.2.6, B.1.4.3, B.1.4.4, B.1.4.5, B.1.4.6, B.2.3.3,B.2.3.4, and Tables A.3, A.4a, A.4b, A.4c, A.4d, A.4e, A.4f, A.5b, A.5c, A.5d, A.5e,A.6a, A.7a, A.7b, A.8a, A.8b, A.8c, A.8d, A.8e, A.8f, A.11a, A.11b,

11/29/2017



A.12, A.13a,A.13b, A.14, A.15, A.21a, A.23, A.25b, A.25d, A.25e, A.25f, A.27, A.29a, B.1, B.2,and B.4.

Energy ANZI Z21.89-2017 • CSA 1.18-2017

Outdoor cooking specialty gas appliancesErrata to Clauses 4.20.14, 4.20.15, and 8.1

11/29/2017

Electrical / Electronics Corrigendum 1:2017 to CAN/CSA-C22.2 No. 60601-2-21:10

Medical electrical equipment — Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers (IEC 60601-2-21:2009, IDT)Appareils électromédicaux — Partie 2-21 : Exigences particulières pour la sécurité de base et les performances essentielles des incubateurs radiants pour nouveau-nés(IEC 60601-2-21:2009, IDT)

10/30/2017

Energy ANSI Z21.97-2014/CSA 2.41-2014

Outdoor decorative gas appliances Errata to Clauses 4.6.5, 5.7.1, and 5.8.1

10/25/2017


Technical Corrigendum 4:2018 to CAN/CSA-ISO/IEC1539-1:12

Information technology — Programming languages — Fortran — Part 1: Base language (ISO/IEC 1539-1:2010, IDT)

10/25/2017


Technical Corrigendum 1:2018 to CAN/CSA-ISO/IEC8652:15

Programming languages — Ada(ISO/IEC 8652:2012, IDT)

10/25/2017


Technical Corrigendum 1:2018 to CAN/CSA-ISO/IEC13818-1:16

Information technology — Generic coding of moving pictures and associated audio information: Part 1: Systems(ISO/IEC 13818-1:2015, IDT)

10/25/2017

Endorsements

This section lists endorsed standards, which are standards that have been developed by another standards development organization and approved by the appropriate CSA Technical Committee for use in Canada. Endorsed standards are not sold by CSA. Program Standard Title Date Posted Scope



No activity to report

Reaffirmations

The standards listed in this section have been reviewed to determine if they remain technically valid and have been reaffirmed as acceptable for use until the next edition is published or for a further five years (whichever comes first).Program Standard Title Date Posted ScopeElectrical / Electronics CAN/CSA-C22.2

NO. 62471:12 (R2017)

Photobiological safety of lamps and lamp systems (Adopted IEC 62471:2006, first edition, 2006-07, with Canadian deviations)

12/21/2017

Electrical / Electronics C22.2 NO. 88-1958 (R2017)

Construction and Test of Industrial Heating Equipment 12/21/2017


Electrically Operated Toys 12/21/2017

Energy CSA 6.18-02 (R2017)

Service Regulators for Natural Gas 12/21/2017


Grounding and bonding equipment (Tri-national standard, with NMX-J-590-ANCE and UL 467)

12/21/2017

Electrical / Electronics C22.2 NO. 42.1-13 (R2017)

Cover plates for flush-mounted wiring devices (Bi-national standard, with UL 514D)

12/21/2017


General Requirements and Methods of Testing for NonmetallicConduit

12/21/2017

Electrical / Electronics CAN/CSA-C22.2 NO. 62471:12(R2017)

Photobiological safety of lamps and lamp systems(Adopted IEC 62471:2006, first edition, 2006-07, with Canadiandeviations)

12/20/2017

Electrical / Electronics CAN/CSA-E1029-1-94 (R2017)

Safety of Transportable Motor-Operated Electric Tools - Part 1: General Requirements (Adopted IEC 1029-1:1990, first edition, with Canadian deviations)

12/20/2017

Electrical / Electronics CAN/CSA-E1029-2-1-94 (R2017)

Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Circular Saws (Adopted IEC 1029-2-1:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Radial Arm Saws (Adopted IEC 1029-2-2:1993, first edition)

12/20/2017




Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Planers and Thicknessers(Adopted IEC 1029-2-3:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Bench Grinders (Adopted IEC 1029-2-4:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Band Saws (Adopted IEC 1029-2-5:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Diamond Drills With Water Supply(Adopted IEC 1029-2-6:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Diamond Saws With Water Supply(Adopted IEC 1029-2-7:1993, first edition)

12/20/2017

Electrical / Electronics C22.2 NO. 221-M1986 (R2017)

Electrically Heated Hobby and Educational Type Kilns 12/20/2017


Spas, hot tubs and associated equipment 12/20/2017

Electrical / Electronics C22.2 NO. 23.1-M1986 (R2017)

Electric Furnaces in Combination With Solid Fuel-Fired Furnaces 12/20/2017


Fuseholder assemblies 12/18/2017

Electrical / Electronics C22.2 NO. 0.1-M1985 (R2017)

General Requirements for Double-Insulated Equipment 12/15/2017


CAN/CSA-ISO 19903-07 (R2017)

Petroleum and Natural Gas Industries - Fixed Concrete Offshore Structures(Adopted ISO 19903:2006, first edition, 2006-12-01)

12/6/2017


Extra-Low-Voltage Landscape Lighting Systems 12/5/2017

Life Sciences Z316.7-12 (R2017)

Primary sample collection facilities and medical laboratories - Patient safety and quality of care - Requirements for collecting, transporting, and storing samples

11/29/2017

Energy CAN/CSA-P.2-13(R2017)

Testing method for measuring the annual fuel utilization efficiency of residential gas-fired or oil-fired furnaces and boilers

11/29/2017



Energy CAN/CSA-P.11-07(R2017)

Testing Method for Measuring Efficiency and Energy Consumption of Gas-Fired Unit Heaters

11/29/2017

Energy CAN/CSA-IEC 61400-24:12(R2017)

Wind turbines - Part 24: Lightning protection(Adopted IEC 61400-24:2010, first edition, 2010-06)

11/27/2017

Electrical / Electronics CAN/CSA-E60335-2-31:12 (R2017)

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors(Adopted CEI/IEC 60335-2-31:2002, edition 4:2002 consolidated with amendment 1:2006 and amendment 2:2008, with Canadiandeviations)

11/23/2017


Busways(Tri-national standard, with UL 857 and NMX-J-148-ANCE)

11/23/2017

Electrical / Electronics C22..2 NO. 235-04 (R2017)

Supplementary Protectors 11/23/2017

Electrical / Electronics C22.2 NO. 155-M1986 (R2017)

Electric Duct Heaters 11/23/2017


Recommended Practices for Electrical Protection - Electric Contact Between Overhead Supply and Communication Lines

11/21/2017

Electrical / Electronics CAN/CSA-C22.3 NO. 3-98 (R2017)

Electrical Coordination 11/21/2017

Electrical / Electronics CAN/CSA-C22.3 NO. 6-13 (R2017)

Principles and practices of electrical coordination between pipelines and electric supply lines

11/21/2017

Electrical / Electronics CAN/CSA-C61000-2-7-04 (R2017)

Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 7: Low Frequency Magnetic Fields in Various Environments(Adopted CEI/IEC 61000-2-7:1998, first edition, 1998-01, withCanadian deviations)

11/17/2017

Electrical / Electronics CAN/CSA-CEI/IEC 61000-2-8-04 (R2017)

Electromagnetic Compatibility (EMC) - Part 2-8: Environment - Voltage Dips and Short Interruptions on Public Electric Power Supply Systems with Statistical Measurement Results (Adopted CEI/IEC 61000-2-8:2002, first edition, 2002-11)

11/17/2017

Electrical / Electronics CAN/CSA-C61000-3-7:09 (R2017)

Electromagnetic compatibility (EMC) - Part 3-7: Limits - Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems (Adopted IEC/TR 61000-3-7:2008, second edition, 2008-02)

11/17/2017

Electrical / Electronics CAN/CSA- Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment 11/17/2017



C61000-3-13-09 (R2017)

of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems (Adopted IEC/TR 61000-3-13:2008, first edition, 2008-02)

Electrical / Electronics CAN/CSA-IEC 61000-4-12:13(R2017)

Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test(Adopted IEC 61000-4-12:2006, second edition, 2006-09)

11/17/2017


Electromagnetic Compatibility (EMC) - Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test(Adopted CEI/IEC 61000-4-14:1999, first edition, 1999-02)

11/17/2017


Electromagnetic Compatibility (EMC) - Part 4-28: Testing and Measurement Techniques - Variation of Power Frequency, ImmunityTest(Adopted CEI/IEC 61000-4-28:1999, first edition, 1999-11)

11/17/2017

Electrical / Electronics CAN/CSA-IEC 61000-6-2-08 (R2017)

Electromagnetic Compatibility (EMC) - Part 6-2: Generic Standards -Immunity for Industrial Environments (Adopted IEC 61000-6-2:2005, second edition, 2005-01)

11/17/2017

Electrical / Electronics CAN/CSA-CEI/IEC CISPR 11-04 (R2017)

Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment -Electromagnetic Disturbance Characteristics - Limits and Methods of Measurement (Adopted CEI/IEC CISPR 11:2003, fourth edition, 2003-03)

11/17/2017


CAN/CSA-B70.1-03 (R2017)

Frames and Covers for Maintenance Holes and Catchbasins 11/15/2017


O112.10-08 (R2017)

Evaluation of Adhesives for Structural Wood Products (Limited Moisture Exposure)

11/15/2017


Brooders and Incubators 11/7/2017


O153-13 (R2017) Poplar plywood 11/6/2017

Life Sciences ASME A17.7-2007/CSA B44.7-07 (R2017)

Performance-Based Safety Code for Elevators and Escalators(Bi-National standard, with ASME A17.7)

11/6/2017

Life Sciences Z11-12 (R2017) Portable ladders 11/1/2017

Quality / Business Management

CAN/CSA-ISO 10001-08 (R2017)

Quality Management - Customer Satisfaction - Guidelines for Codes of Conduct for Organizations (Adopted ISO 10001:2007, first edition, 2007-12-01)

10/26/2017



Shop CSA

Copyright © 2017 CSA Group. All Rights Reserved.

Quality / BusinessManagement

CAN/CSA-ISO 10003-08 (R2017)

Quality Management - Customer Satisfaction - Guidelines for Dispute Resolution External to Organizations(Adopted ISO 10003:2007, first edition, 2007-12-01)

10/26/2017

Withdrawals

The standards listed in this section have been withdrawn. Most withdrawn standards are available from our archived collection. Program Standard Title Date Posted ScopeLife Sciences SPE-1112-14 User handbook for medical device reprocessing in community health

care settings 11/21/2017

Formal Interpretations

This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate committee. View Detail

Informs & Certification Notices

This section lists notices that are published by Certification and Testing. An Informs Notice contains information only. A Certification Notice announces changes that may affect product certification. Please allow time for page to load. View Detail



Documents

New Publications Program Standard Title Date Posted Scope · Information technology — Object oriented BioAPI — Part 2: Java implementation (Adopted ISO/IEC 30106-2:2016, first