Project Name

Catalog #

Type

Date

PROJECT INFORMATION

www.xtralight.com • (800) 678-6960 • customerservice@xtralight.comAll information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the

most updated product specifications. XtraLight® reserves the right to change specifications without notice.

GLLM-4500.6500L 190912

ORDER LOGIC

FEATURES

• Energy-efficient LED luminaire designed for parking garage applications with mounting heights 15 feet and below.

• Decorative yet rugged construction protects internal components from the outdoor conditions.

• Provides a smooth, even, IES Type V symmetrical light distribution.

• Operating temperature: -40°C to +50°C (-40°F to +122°F).

• Low profile design, only 4.5 inches.

CONSTRUCTION

• Housing: heavy-duty, die-cast aluminum with TGIC polyester bronze powder coat finish (RoHS compliant, low VOC).

• Polycarbonate prismatic lens, injection molded, UV stabilized.

MOUNTING

• Three (3) 1/2” NPT access points for surface conduit and one (1) 1/2” NPT hub for pendant or J-box mounting.

ELECTRICAL

• Voltage: 120-277VAC input. Optional 480V.

• Driver: Class 2, constant current, electronic power supply, factory calibrated to LED modules.

• Dimming: 0-10V dimming driver standard.

• Driver and LED COBs are easily accessible.

• Best-In-Class LEDs: 3000K, 4000K and 5000K CCT (min 70 CRI).

• Supplemental 20kA surge protection option available.

• Passive infrared (PIR) photo/motion sensors options available.

WARRANTY• Backed by XtraLight’s industry leading 10-year warranty.

SAMPLE CATALOG NUMBER: GLLM-6500L-50K-DIM

GARAGE LED LUMINAIREGLLM 4500-6500L APPLICATIONS

• Parking Garages

APPROVALS• ETL listed for Wet Locations.• Complies with UL1598 and CSA 22.2• Select Models DLC Qualified. For a complete list of DLC

Qualified products please visit www.xtralight.com/dlc or www.designlights.org/qpl

- - - -

CCT

30K 3000K

40K 4000K

50K 5000K

DRIVER

DIM Multi-Volt 120-277V, Dimming 0-10V

48D Multi-Volt 347-480V, Dimming

MODEL

4500L (42W)

6500L (56W)

GLLM

SPECIAL OPTIONS

PC Photocell Button, 120-277V

FSP2 FSP-211 L2 8’MH/44’DIA

FSP3 FSP-211 L320’MH/40’DIA

SRG 20kA Surge Protection

PRODUCT PERFORMANCE

MODEL CCT WATTS LUMENS EFFICACY

4500L 4000K 42.5 4623 108.8

6500L 4000K 53.9 6461 119.9

www.xtralight.com • (800) 678-6960 • customerservice@xtralight.comAll information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the

most updated product specifications. XtraLight® reserves the right to change specifications without notice.

DIMENSIONAL DATA

GLLM-4500.6500L 190912

12.2 in 4.53 in

2.52 in

12.2 in

4.75 in .5 in

8.875 in

8.875 in

GARAGE LED LUMINAIREGLLM 4500-6500L

PHOTOMETRIC DATA

GLLM-6500L

Catalog Number: GLLM-6500L-40K-DIM

Report Number: ATAL026266.iesIssue Date: 08/24/18Lamp: (2) LED COBsLens/Optics: Polycarbonate LensIESNA: LM-63-2002Total Input Watts: 53.8Efficacy (Lm/W): 120.0Total Lumens: 6461Prepared by: American Testing & Assessment LaboratoryNOTE: Data shown is absolute for product shown. BUG RATING B2-U3-G3

MODEL IES REPORT CCT SYSTEM WATTS LUMENS EFFICACY

4500L ATAL027428 3000K 42.5 4407 103.8

4500L ATAL027093 4000K 42.5 4623 108.8

4500L ATAL027427 5000K 42.9 4626 107.7

6500L ATAL026321 5000K 54.1 6384 117.9

6500L ATAL026266 4000K 53.9 6461 119.9

6500L ATAL026425 3000K 55.0 6117 111.2

PHOTOMETRIC DATA SUMMARY

www.xtralight.com • (800) 678-6960 • customerservice@xtralight.comAll information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the

most updated product specifications. XtraLight® reserves the right to change specifications without notice.

GLLM-4500.6500L 190912

GARAGE LED LUMINAIREGLLM 4500-6500L

LIGHTING CONTROLS

OPTION FSP3 FSP-211 L3 20' Mounting Height 40' Diameter

OPTION FSP2 FSP-211 L2 8' Mounting Height 44' Diameter

www.wattstopper.com8 0 0 . 8 7 9 . 8 5 8 5

Coverage

Dimensions of Lens Options

FSP-L3 top and side coverage patterns

FSP-L4 top and side coverage patterns

FSP-L2 top and side coverage patterns

FSP-L2 dimensions FSP-L3 dimensions FSP-L4 dimensions

0’ 3’ 6’ 12’ 27’30’

3’6’12’27’30’

20’ 20’

0’3’6’

3’6’

12’

27’

30’

12’

27’

20’

20’

60’

30’

0’

10’

20’

30’

40’0’ 6’ 12’ 30’6’12’20’ 20’

20’ 10’ 0’ 10’ 20’

0’

20’

10’

10’

20’

40’

0’3’ 9’6’3’6’9’12’ 12’

10’

20’

0’

15’

5’

15’18’20’ 15’ 18’ 20

0'

8'

0' 3'3' 7'7' 11'11' 24'24'

30'

20'

10'

10'

20'

0'

10' 0' 10' 20'20'

60 ft

2.33”59.2mm

0.78”19.7mm

2.33”59.2mm

0.78”19.7mm

3.2”81.3mm

0.93”23.6mm

FSP-L7 top and side coverage patterns0'10' 10'20' 20'30' 30'40' 40'

0'

27'

40'

50'50'50' 25' 0' 25' 50'

0'

50'

25'

25'

50'

100'

FSP-L7 dimensions

3.2”81.3mm

1.04”26.4mm

WWW.LEGRAND.US/WATTSTOPPER

WATTSTOPPER®FIXTURE SENSORS & CONTROLS

DescriptionThe FSP-211 mounts in an outdoor lighting fixture and provides multi-level control based on motion and/or daylight contribution. It controls 0-10 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, is rated for wet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles.

OperationTypically, the sensor ramps lighting On to the selected High mode level when motion is detected and the ambient light level is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. For dusk to dawn control, the integral photocell can switch the lights On and Off based on the ambient light level so that lighting remains on overnight even without motion detection.

Wireless Handheld Configuration ToolInitial setup and subsequent sensor adjustments are made using a handheld configuration tool (FSIR-100). This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cut off and more. The FSIR-100 is also used to initiate automatic calibration of the FSP-211 ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at low level when there is sufficient daylight. The wireless tool stores up to six sensor parameter profiles to speed configuration of multiple sensors.

ApplicationsThe slim, low-profile FSP-211 is designed for installation inside the bottom of a light fixture body. When fully assembled and installed in an IP66-rated fixture, the sensor and FSP-Lx lenses are IP66 outdoor rated. The sensor is ideal for areas such as parking facilities, gas stations, pedestrian pathways and warehouses. A choice of four lenses ensures complete coverage for mounting heights up to 40’.

LINE VOLTAGE HIGH/LOW/OFF PIR FIXTURE INTEGRATED OUT-DOOR PHOTO/MOTION SENSOR

FSP-211

• Provides line voltage On/Off switching and 0-10 VDC dimming control

• Works with ballasts or LED drivers

• High and low modes fully adjustable from 0 to 10V

• Time delay from 5 to 30 minutes

• Optional cut off delay

• Adjustable ramp up and fade down times

• Optional daylighting setpoints feature automatic calibration, or permit manual adjustment

• Configuration tool stores six sensor profiles for quick setup and adjustment of multiple sensors

• Polycarbonate construction; flame retardant, UV resistant, impact resistant, recyclable

• UL244A and UL508; IP66 rated (when fully assembled and installed) for use in wet locations

• This product meets the materials restrictions of RoHS

• BAA/TAA-compliant models available

Features

Fully adjustable high and low dimmed light levels; optional

dusk to dawn control

Adjustable via handheld wireless configuration tool

Adjustable time delay and cut off delay

Designed for LED fixtures; rated for extreme

temperatures and up to 200,000 on/off cycles

IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8’ to 40’

Hold off setpoint with automatic calibration option

for convenience and added energy savings

WATTSTOPPER®

2.33”59.2mm

0.78”19.7mm

FSP-L4: 360° CoverageThe FSP-L4 is designed for mounting at heights between 30’ to 40’ . Its coverage area can be up to 60’ in diameter when mounted at 40’ .

COVERAGE PATTERN

Density and range of the coverage pattern is determined by the type of lens and mounting height .

FSP-L2: 360° CoverageThe FSP-L2 lens provides a 44’ diameter coverage area when mounted at a height of 8’ .

FSP‑L3 High Densi ty/Reduced Range Lens

FSP‑L2 Low Densi ty/Wide Range Lens

03 9636912 12

10

20

0

15

5

151820 15 18 20

20 10 0 10 20

0

20

10

10

20

40 ft

2.33”59.2mm

0.78”19.7mm

30

30

20

10

10

20

0

8

0

10 0

0 33 77 1111 2222

10 2020

44 ft

FSP‑L4 40 Foot High Bay Lens

0 6 12 3061230 20 20

0

10

20

30

40

0 3 6 12 2730

36122730

20 20

036

36

12

27

30

12

27

20

20

60 ft

3.2”81.3mm

0.93”23.6mm

FSP-L3: 360° CoverageThe FSP-L3 has a high density lens that covers a 40’ diameter area at a height of 20’ .

WIRING A SINGLE SENSOR

Non-DimmingDriver

LIN

EN

EU

TRA

L

NEUTRAL

LOAD

* GROUND

Occupancy Sensor

5E4

800.879.8585www.wattstopper.com

1519

5r1

LOA

D

LIN

E

NEU

T(v

iole

t)

(gre

y)

18-20 AWG Solid CU Wire Only

230 VAC, 50 Hz1200W max ballast

FSP-211

GRN

D

DIM

-

DIM

+

14-18 AWG Solid CU Wire Only

High/Low PIR

Non-Dimming Driver

DimmingDriver

LIN

EN

EU

TRA

L

NEUTRAL

*GROUND

GRAY (-)

VIOLET (+)

LOAD

Occupancy Sensor

5E4

800.879.8585www.wattstopper.com

1519

5r1

LOA

D

LIN

E

NEU

T(v

iole

t)

(gre

y)

18-20 AWG Solid CU Wire Only

230 VAC, 50 Hz1200W max ballast

FSP-211

GRN

D

DIM

-

DIM

+

14-18 AWG Solid CU Wire Only

High/Low PIR

Dimming Driver

1 . Determine an appropriate mounting location inside the light fixture . Allow a minimum distance of 0 .2” (5 .1mm) from the wiring end of the sensor to the wall of the fixture .

2 . Drill a hole 1 .30” (33 .0mm) in diameter through the sheet metal in the bottom of the fixture .

3 . Add the rubber gasket to the threaded collar, and install the sensor face down, parallel to the mounting surface . Ensure the rubber gasket touches the inside surface of the fixture . Install the plastic nut securely against the fixture to a torque of 25-30 in-lbs to ensure IP rating is maintained .

4 . Align the locking features between the sensor and lens module and push the lens module forward until the o-ring seals firmly . Turn the lens module clockwise to ensure it locks in place .

5 . Connect load and supply wires as shown in wiring diagram .6 . Restore power from the circuit breaker .

CAUTION TURN THE POWER OFF AT THE CIRCUIT BREAKER

BEFORE INSTALLING THE SENSOR.

TighteningNut

TighteningNut Fixture

Wall

Lens Assembly

FSP-211

Outside Fixture Wall

Inside FixtureWall

RubberGasket

RubberGasket

Note: The Outside Fixture Wall thickness should be no greater than 0 .125” (3 .18mm) for optimal sensor mounting and security .

* Note: The FSP-211 must be grounded to ensure signal integrity, not for safety ground .

Outdoor Use at the exposed Sensor Collar part only when installed at the specific location per Installation

Instructions with a Listed Outdoor Enclosure.

INSTALLATION

30

30

20

10

10

20

0

8

0

10 0

0 33 77 1111 2222

10 2020

44 ft

Coverage Top View

Coverage Top View

Coverage Top View

Coverage Side View

Coverage Side View

Coverage Side View

2.33”59.2mm

0.78”19.7mm

FSP-L4: 360° CoverageThe FSP-L4 is designed for mounting at heights between 30’ to 40’ . Its coverage area can be up to 60’ in diameter when mounted at 40’ .

COVERAGE PATTERN

Density and range of the coverage pattern is determined by the type of lens and mounting height .

FSP-L2: 360° CoverageThe FSP-L2 lens provides a 44’ diameter coverage area when mounted at a height of 8’ .

FSP‑L3 High Densi ty/Reduced Range Lens

FSP‑L2 Low Densi ty/Wide Range Lens

03 9636912 12

10

20

0

15

5

151820 15 18 20

20 10 0 10 20

0

20

10

10

20

40 ft

2.33”59.2mm

0.78”19.7mm

30

30

20

10

10

20

0

8

0

10 0

0 33 77 1111 2222

10 2020

44 ft

FSP‑L4 40 Foot High Bay Lens

0 6 12 3061230 20 20

0

10

20

30

40

0 3 6 12 2730

36122730

20 20

036

36

12

27

30

12

27

20

20

60 ft

3.2”81.3mm

0.93”23.6mm

FSP-L3: 360° CoverageThe FSP-L3 has a high density lens that covers a 40’ diameter area at a height of 20’ .

WIRING A SINGLE SENSOR

Non-DimmingDriver

LIN

EN

EU

TRA

L

NEUTRAL

LOAD

* GROUND

Occupancy Sensor

5E4

800.879.8585www.wattstopper.com

1519

5r1

LOA

D

LIN

E

NEU

T(v

iole

t)

(gre

y)

18-20 AWG Solid CU Wire Only

230 VAC, 50 Hz1200W max ballast

FSP-211

GRN

D

DIM

-

DIM

+

14-18 AWG Solid CU Wire Only

High/Low PIR

Non-Dimming Driver

DimmingDriver

LIN

EN

EU

TRA

L

NEUTRAL

*GROUND

GRAY (-)

VIOLET (+)

LOAD

Occupancy Sensor

5E4

800.879.8585www.wattstopper.com

1519

5r1

LOA

D

LIN

E

NEU

T(v

iole

t)

(gre

y)

18-20 AWG Solid CU Wire Only

230 VAC, 50 Hz1200W max ballast

FSP-211

GRN

D

DIM

-

DIM

+

14-18 AWG Solid CU Wire Only

High/Low PIR

Dimming Driver

1 . Determine an appropriate mounting location inside the light fixture . Allow a minimum distance of 0 .2” (5 .1mm) from the wiring end of the sensor to the wall of the fixture .

2 . Drill a hole 1 .30” (33 .0mm) in diameter through the sheet metal in the bottom of the fixture .

3 . Add the rubber gasket to the threaded collar, and install the sensor face down, parallel to the mounting surface . Ensure the rubber gasket touches the inside surface of the fixture . Install the plastic nut securely against the fixture to a torque of 25-30 in-lbs to ensure IP rating is maintained .

4 . Align the locking features between the sensor and lens module and push the lens module forward until the o-ring seals firmly . Turn the lens module clockwise to ensure it locks in place .

5 . Connect load and supply wires as shown in wiring diagram .6 . Restore power from the circuit breaker .

CAUTION TURN THE POWER OFF AT THE CIRCUIT BREAKER

BEFORE INSTALLING THE SENSOR.

TighteningNut

TighteningNut Fixture

Wall

Lens Assembly

FSP-211

Outside Fixture Wall

Inside FixtureWall

RubberGasket

RubberGasket

Note: The Outside Fixture Wall thickness should be no greater than 0 .125” (3 .18mm) for optimal sensor mounting and security .

* Note: The FSP-211 must be grounded to ensure signal integrity, not for safety ground .

Outdoor Use at the exposed Sensor Collar part only when installed at the specific location per Installation

Instructions with a Listed Outdoor Enclosure.

INSTALLATION

30

30

20

10

10

20

0

8

0

10 0

0 33 77 1111 2222

10 2020

44 ft

Coverage Top View

Coverage Top View

Coverage Top View

Coverage Side View

Coverage Side View

Coverage Side View