PARTS • SERVICE • EXPERIENCE • SOLUTIONS

www.pointspring.comPromotional pricing valid through March 31, 2018

DIRECTIONAL LEDS

BACK-UP ALARMS

3811A SAE Class I, Surface Mount, Amber $72.993861A SAE Class I, Surface Mount, Amber $72.99

• Tough, clear polycarbonate housing with encapsulated electronics• Seven flash patterns• Synchronizable with additional 3811/3861• Discrete units are colorless when not illuminated• Grommet mount versions fit standard oval rear lighting grommet• Temperature Range: -22°F to +122°F (-30°C to +50°C)

3932A $53.99Surface Mount, Amber

• 18 high intensity LEDs

• 16 flash patterns including random

• Extremely slim at only 0.34”

• Long, maintenance-free service life

• Low current draw

• IP66

• Warranty: 2 years

3945A $52.99SAE Class I, Grommet Mount, Amber3965A $52.99SAE Class I, Grommet Mount, Amber

• High output LEDs offer low maintenance, long life and low current consumption• Ultrasonically sealed housing• Fits in standard oval or round rear lighting grommet (included)• Vibration and shock resistant construction• Temperature Range: -22°F to +122°F (-30°C to +50°C)

510 97 dB(A) Back-Up Alarm $26.99520 97 dB(A) Back-Up Alarm $29.99575 107 dB(A) Back-Up Alarm $42.99

• Compact size and universal mounting bracket maximizes location options• Self grounding (except 575)• Sealed in epoxy for protection against dust, moisture, and vibration• Temperature Range: -40°F to +185°F (-40°C to +85°C)

BEACONS

MINI BAR

7945A $89.99Pulse II, SAE Class II, 3 Bolt/1” Pipe Mount, Amber

7945A-VM $111.99Pulse II, SAE Class II, Vacuum-Magnet Mount, Amber

7950A $89.99Pulse II, SAE Class II, 3 Bolt/1” Pipe Mount, Amber

7950A-VM $111.99Pulse II, SAE Class II, Vacuum-Magnet Mount, Amber• 11 flash patterns

• Reinforced polypropylene base, polycarbonate lens

• Switched cigarette plug adapter (vacuum-magnet models)

• Rechargeable battery powered model available in amber

• Temperature Range: -22°F to +122°F (-30°C to +50°C)

5580A $262.99SAE Class II, 15”, Permanent, Amber

5580A-VM $303.99SAE Class II, 15”, Vacuum-Magnet, Amber

• Eight LED reflector modules, each comprising three LEDs provide high intensity light output• Choice of 18 flash patterns• Polycarbonate base & low profile lens• Temperature Range: -22°F to +122°F (-30°C to +50°C)

5590A $335.99SAE Class I, 15”, Permanent, Amber• Combines Reflective and TIR Optic LED modules to optimize focused front/rear warning and wide-angle side warning

• Choice of 18 flash patterns

• Cigarette plug with on/off and flash pattern selection switch (vacuum-magnet & magnet only)

• Temperature Range: -22°F to +122°F (-30°C to +50°C)

6465A $52.99SAE Class III, 3 Bolt Mount, Amber

6465A-MG $62.99SAE Class III, Magnet Mount, Amber

• Pulse8 (8 flash per cycle) flash pattern

• Reinforced-nylon base and polycarbonate lens• Rechargeable battery powered model available in all colors • Temperature Range: -22°F to +122°F (-30°C to +50°C)

CB’S & ACCESSORIES

29LTDCLASSIC $122.99Cobra 40-Channel CB Radio

29LX $149.9940-Channel CB Radio with Instant Access 10 NOAA Weather Stations and Selectable 4 Color Display

DX-959 $248.9940 Channel AM/SSB Mobile CB Radio with Frequency Counter

29NWLTD $144.99Cobra 40 Channel CB Radio with Nightwatch TM SWR Calibration 9’ Microphone Cord

302-10001 $41.994-Pin Noise-Canceling Microphone (Black)

RK564P $51.994-Pin Dynamic Noise-Canceling CB Microphone

HGM-73 $14.99Standard Dynamic CB Microphone

RT-44112 $17.99Standard Retractable CB Microphone Hanger

RT-34112 $20.99Heavy Duty Retractable CB Microphone Hanger

RPPS-2B $11.99Platinum Series 2’ Fiberglass CB Whip Antenna

RPPS-3B $12.99Platinum Series 3’ Fiberglass CB Antenna Whip

RP-8X9 $10.99Gray 9’ CB Antenna Coax Cable with PL-259 Connectors

RP-8X18CL $13.99Clear 18’ CB Antenna Mini-8 Coax Cable with PL-259 Connector

RP-8X12CL $11.99Clear 12’ CB Antenna Mini-8 Coax Cable with PL-259 Connector

300-CB22B $11.99100-Watt, 3’ Hot Rod Fiberglass Antenna (Black)

300-CB24B $13.99100-Watt, 4’ Hot Rod Fiberglass Antenna (Black)

305-480 $19.99Silver Load FGT Series Black 2’ Fiberglass Whip

305-492 $47.99T2000 Series Black Mobile CB Trucker Antenna with 5” Shaft

RP-311HD $6.993” Heavy Duty Chrome Plated Steel Antenna Shock Spring

JUMP BOXES

BIG RIG PRO 16L $750.00

• Recommended for Passenger cars to Semi trucks up to 16.0 Liter Gasoline and 16.0 Liter Diesel engines.

• 12 Volt (16 Volt peak), 3000 Amperes (<2s)

• 236,800mWh (236.8 Wh) power bank for long lasting power supply.

• 56,000 mAh at 3.7 Volts

• Battery charge lasts approximately 2.5 years depending upon ambient temperature. 3 to 4 times longer than lead acid batteries.

• Over 6 starts with a fully charged battery.

• Patented internal MOSFET switching for en- hanced safety, starting performance and longer life.

FLEET PRO 10L $295.00

• Commercial-Grade jump starter, recommended for 1-ton to Class 6 medium duty trucks up to 10.0 Liter diesel.

• 12 Volt (16 Volt peak), 1500 Amperes (<2s)

• 103,600 mWh (103.6 Wh) power bank for long lasting power supply.

• 28,000 mAh at 3.7 Volts

• Battery charge lasts approximately 2.5 years depending upon ambient temperature. 3 to 4 times longer than lead acid batteries.

• Over 6 starts with a fully charged battery.

• Patented internal MOSFET switching for en- hanced safety, starting performance and longer life.

SPILL KIT

PIG® UNIVERSAL SPILL KIT IN SEE-THRU BAG #KIT908

$30.77

BE PREPARED FOR FAST RESPONSE WITH A NEW PIG® UNIVERSAL SPILL KIT!

Quick response is key: Spills happen no matter how hard you try to avoid them. Forklifts knock over drums, tanks are punctured and transporters leak and drip.

It is important to have the right sorbents on-hand when these spills occur to eliminate the slip-and-fall hazard. A quick response is the first order of business — and your best weapon — in the fight against spills. New Pig® Spill Kits are packed with quality products to help you clean up fast and comply with regulations.

The sorbents you need are all inside: Includes a variety of sorbents to handle smaller spills of oils, coolants, solvents or water that truckers encounter on a regular basis; pre-packed in a handy bag.

Self-contained, compact kit stores sorbent products for easy access as needed for spill control; saves time when quick response is necessary. Small size; easily fits behind the seat of a truck.

KIT CONTENTS: 20 - 15” x 19” Heavyweight Universal Pads

3 - 3” x 48” Gray Universal Sorbent Socks

1 - Nitrile Gloves

1 - Safety Goggles

2 - 18”W x 30”L Yellow Temporary Disposal Bags and Ties

1 - 3” x 5” Vinyl Spill Kit Label

1 - Clear Vinyl Zippered Bag

WHEEL HUBS

WHEEL END

WHEEL SEALS

STANDARD TAPERED WHEEL BEARINGS & SETS

PRE-ADJUSTED TAPERED WHEEL BEARINGS & SETS

Webb Part No.

Gunite Part No.

Hole Stud Type Pilot Diameter Bearing Combination

2023PT 10 M22 x 1.5 11 1/4" HM212049 - HM218248

2323PT 10 M22 x 1.5 11" HM518445

2343PT 10 M22 x 1.5 11" HM518445

HR735K 10 22mm 9" HM516449 - 47679

HF803K 10 22mm 9" HM212049 - 3782

HF805K 10 22mm 9" 6461A - 555S

HR925RD 10 22mm 9" 594A - 580

HR931SK 10 22mm 9" 594A - 580

Type SKF National Stemco

Drive Axle Seal 47691 380003A 393-0173

Drive Axle Seal 42673 380031A 393-0104

Drive Axle Seal 38776 380023A 393-0112

Steer Axle Seal 35058 380001A 383-0136

Steer Axle Seal 43761 380048A 383-0164

Trailer Axle Seal 40129 380036A 373-0113

Trailer Axle Seal 42672 380065A 373-0123

Trailer Axle Seal 46300 380025A 373-0143

Timken Set No. Timken Part No.

SET401 580, 572

SET402 582, 572

SET403 594A, 592A

SET406 3782, 3720

SET408 39590, 39520

SET411 4686, 47620

SET413 HM212047, HM212011

SET414 HM218248, HM218210

SET415 HM518445, HM518410

SET421 HM516449A, HM516410

SET425 567, 563

SET426 47679, 47620

Timken Set No. Timken Part No.

SET427 NP899357, NP026773

SET429 NP034946, NP363298

SET430 NP840302, NP053874

Stemco Part No.

Replacement Keeper Part No. Thread Size Outer Bearing

Cone/CupTRAILER AXLE

447-4723 450-4723 3.480" - 12 HM518445 / HM518410

447-4743 450-4743 2 5/8" - 16 HM21204 / HM212011

449-4973 450-4973 3 1/4" - 12 HM518445 / HM518410

STEER AXLE448-4837 450-4837 1 1/2" - 12 3782 / 3720

STEMCO PRO-TORQ UNRIVALED PRECISION AND SERVICE LIFE Increase tire life and reduce premature wheel seal failure with the proven performance of the Pro-Torq® axle spindle nut. With back off increments down to 0.001 inch and exacting cup and cone alignment on the spindle, nothing compares to the reliability and precision of Pro-Torq.

INCREASED TREAD LIFEControls axial motion, holding bearing end play near zero for longer tread life.

PRECISE BEARING ADJUSTMENTMinimizes premature seal failure and improves seal and brake lining programs.

COMPENSATES FOR WEARAllows 0.001 inch back off increments to keep bearings aligned, running cooler and lasting longer.

IMPROVES ABSHelps ensure accurate wheel-speed monitoring on anti-lock braking systems.

SINGLE-NUT DESIGNEliminates potential for over tightening the jam nut and pushing the outer bearing cone out of position.

EASY TO INSTALLOnly one nut means less time wasted trying to reposition multiple-nut assemblies.

NEVILLE ISLAND, PA 7309 Grand AvenueNeville Island, PA 15225Ph: 412-264-6714Fx: 412-264-6722(800) 837-4713

GREENSBURG, PA1967 Route 66Greensburg, PA 15601Ph: 724-834-0750Fx: 724-834-8747(800) 837-9713

NEW CASTLE, PA 1001 Harbor StreetNew Castle, PA 16105Ph: 724-658-9076Fx: 724-658-8746(800) 837-8713

MEADVILLE, PA 11377 Mercer PikeMeadville, PA 16335Ph: 814-724-7746Fx: 814-724-7747(800) 724-7751

TROY, PA68 Canton StreetTroy, PA 16947Ph: 570-297-5555Fx: 570-297-5510(855) 297-6380

CLEARFIELD, PA 1729 Industrial Park Rd.P.O. Box 1206Clearfield, PA 16830Ph: 814-765-9684Fx: 814-765-1577(800) 252-3585

POINT SPRING & DRIVESHAFT CO. LOCATIONS

FAIRMONT, WV274 Van Kirk DriveFairmont, WV 26554Ph: 304-534-3306Fx: 304-534-5079(800) 837-1713

AKRON, OH1250 Triplett Blvd.Akron, OH 44306Ph: 330-724-1111Fx: 330-724-1895(800) 826-0673

Promotional pricing valid through March 31, 2018

YOUR COMPLETE SUSPENSION, DRIVELINE, BRAKE, ELECTRICAL, AUXILIARY POWER, HYDRAULICS, TRANSMISSION

AND DIFFERENTIAL PARTS & SERVICE PROVIDER

SHOP SERVICES OFFERED:• Light/Heavy Duty Alignment

• Hydraulic Hose Assembly & Repair

• Driveline Repair & Assembly

• Custom Bent U-Bolts To Customer Specifications

• Light/Heavy Duty Leaf Spring & Suspension Repair & Replacement

• Light/Heavy Duty Brake & Wheel End

• Hub & Bearing Installations

• Clutch, Transmission & Differential Repair & Replacement

• Custom Driveshaft Building

• Flywheel Resurfacing

• Fan Clutch Rebuilding

WE SERVICE WHAT WE SELL! Let our shop repair or replace any damaged parts on your vehicle!

LIGHTING/ELECTRICAL

FILTRATION

HYDRAULICS

BRAKE

DRIVELINE

SUSPENSION