www.mccain-inc.com

®

TS 2 Type 2TS 2 Type 1

Cabinets

Controllers

Signals

Signs

Software

Specialty

Overview

Benefits Product Description

McCain’s ATC eX NEMA controller is an advanced, multi-application controller that simultaneously supports multiple software applications through a single platform. Designed from the ground-up based on NEMA TS 2 and ATC 5.2b standards, the ATC eX NEMA controller provides revolutionary flexibility and control. Best of all, the single ATC eX compliant housing can be configured for either TS 2 Type 1 or TS 2 Type 2 applications and is backward compatible with TS 1. This allows end users to upgrade existing intersections to a modern, high-performance platform without the need to replace cabinet hardware.

• NEMA TS 1, TS 2 Type 1, and TS 2 Type 2 compatible

• Compliant with current NEMA and ATC standards

• Simultaneously supports multiple transportation software applications

• Multi-tasking ability minimizes the amount of hardware required at intersections

• Available with McCain’s NTCIP compliant Omni eX® intersection control software providing superior performance and advanced control

The McCain ATC eX NEMA controller is a revolutionary, multi-application NEMA controller, compliant with the latest NEMA and ATC standards.

The ATC eX controller features a wide variety of communications options, including serial and Ethernet for connectivity in any kind of environment. Quick data transfers, firmware upgrades, and log retrievals can be done via USB.

The ATC eX is available with McCain’s user-friendly, NTCIP compliant, Omni eX intersection control software. This advanced, easy-to-use software features a comprehensive ‘Help’ function to support technicians in the field. The software supports all standard NEMA and NTCIP functions as well as a number of enhanced features for maximum flexibility.

The controller’s Linux operating system provides a robust, flexible, open-architecture platform that can support third party applications.

ATC eX NEMA ControllersTS 2 Type 1TS 2 Type 2

To learn more about McCain’s Integrated Traffic Solutions, please contact info@mccain-inc.com or call (760) 727-8100

®

Example Omni eX Screen Shot - Phase Timings

Example Omni eX Screen Shot - Main Menu

ATC eX NEMA Controllers

Controller InterfacesCommunication interfaces

• SDLC ports (2) including SP3 routed to NEMA TS 2 Port 1• Serial (asynchronous) on front panel (3)• Serial (asynchronous) on 2070 compatible modem slot (2)• ENET 1: 100 Base-T Ethernet switch, 1 uplink, and 3

additional ports• ENET 2: 100 Base-T Ethernet port dedicated for local

communications (i.e. laptop or similar)• USB ports (4)

Front panel interface

• Display: 16 lines x 40 characters• Keyboard: 7 x 4 keypad (28 key)

Cabinet interfaces

• NEMA TS 2 Type 1 Port 1 (SDLC)• NEMA TS 2 Type 1 A connector• NEMA TS 2 Type 2 A, B, C and D connectors

Hardware FeaturesOperating system

• Linux

Microprocessor

• Freescale PowerQUICC II Pro microprocessor

Memory

• 16MB Flash memory• 128MB DDR RAM (expandable)• 2MB non-volatile SRAM

Backup real-time clock (RTC)

Applicable standards

• NEMA TS 2-2003 v2.06• ATC 5.2b• NTCIP 1201/1202 (Omni eX software)• All applicable NTCIP base standards

Software Features

Omni eX® Software

Phases

• 16-volume/density vehicle phases• 16-pedestrian phases• 4 rings• Automatic barrier calculation based

on compatible phases• Variable phase sequence• Exclusive pedestrian-phase

operation• Alternate timing for special vehicles

or pedestrians• Advance and delayed WALK

operation• 4 phase banks allow different sets

of phase timing and options

Coordination

• 253 standard patterns• Phase sequence selection by

pattern• Recall selection by pattern• Fixed, floating, or manual force off

selection• Reference cycle to beginning or

end of green• Change phase, overlap, or detector

options by pattern

Overlaps

• 16 vehicle overlaps• 16 pedestrian overlaps• Negative vehicle and pedestrian

phases

Detection

• 128 local detectors• 32 system detectors• Phase assignments configurable

per detector• Each detector supports all NTCIP

detector options including count, call, and extension

• Delay and extend• Volume/occupancy configurable

per detector• Detector failure monitoring (stuck

on, stuck off, and erratic calls) configurable by time-of-day (TOD)

Communications

• NTCIP compliant communications• Data validation during download

process• USB for quick database upload/

download, firmware upgrades, log retrieval

• All industry standard communication infrastructures supported

Preemption

• 8 preemption sequences• Each sequence can be configured

for railroad or emergency vehicle• Definable priority and “linking”• Flash, limited service

Field I/O

• All input and output functions are individually assignable (I/O map)

• Internal Boolean logic gates

Inputs

• Alarm inputs (16)• Special functions (16)

Outputs

• Special functions (16)• Auxiliary outputs (8)

Time of Day Scheduler

• 64 schedules• 64 day plans• 48 events

Time of Day/Day of Week Functions

• Minimum, maximum, and soft recall

• Red rest by phase• Vehicle recall by phase• Detector plan• Pedestrian recall by phase• Rest in walk• Alternate phase timings and

options• Alternate detector configuration

and diagnostics• Alternate overlap configuration• Phase omit• Pedestrian omit• Phase sequence• Conditional service• Second phase maximum

Logs

• NTCIP Global Reporting conformance group for user defined event logging

• Extensive event log for management and diagnostic purposes

• Cycle-based measures of effectiveness

• Detector volume, occupancy, and speed

McCain’s Omni eX intersection control software is an advanced, fully NTCIP compliant program that features assignable inputs and outputs (I/O), provides enhanced measures of effectiveness (MOE), and offers a high number of vehicle and pedestrian movements. It also easily integrates with McCain’s Transparity® central management software, providing complete ITS functionality by controlling all NTCIP devices through a single system and user interface (see separate data sheet).

© 2011 McCain Inc. Updated 09/06/11. McCain reserves the right to change product specifications without notice. For the most up-to-date information, please contact McCain.

2365 OAK RIDGE WAY // VISTA, CALIFORNIA 92081 // USA // WWW.MCCAIN-INC.COM

To learn more about McCain’s Integrated Traffic Solutions, please contact info@mccain-inc.com or call (760) 727-8100

®

ATC eX NEMA Controllers

General SpecificationsStyle: TS 2 Type 1, TS 2 Type 2

Dimensions: TS 2 Type 1: 7” H x 10” W x 10.5” DTS 2 Type 2: 10” H x 10” W x 10.5” D(rounded to the nearest 0.1”)

Form Factor: Shelf mount configuration

Power: 89 VAC to 135 VAC, 60 Hz (± 3 Hz)

Environment: Operating Temperature: -37o C to +74o CHumidity: 0 to 95% (non-condensing)

Weight: TS 2 Type 1: 7 lbsTS 2 Type 2: 10 lbs

Options• 256MB DDR memory expansion• Optional modules

• Various communication modules (2070 form factor)• GPS module

• Custom D connectors• International Input Voltage: 190VAC to 253VAC, 50 Hz (± 3 Hz)