Upload
phungtuong
View
223
Download
7
Embed Size (px)
Citation preview
N / K TowerThree-Legged Towers withTubular Legs and Angular Braces
Telecom Division
• Available in heights of 30 to 120m
• Designed for heavy loads
• Designed for MW backbone sites or communication hubs
• Designed to fit a specific site layout and enables last-minute modifications
• Available with a large variety of accessories that can be easily mounted at any stage
• Provides the best stiffness/weight tower structure
Telecom Division
5 Hatzoref St. Holon 58856, Israelwww.mer-group.com [email protected]
Technical Details
Accessories:• Working and rest platforms• Antenna mounts• Anti-climb guard & other safety devices• Paint kit (ICAO standards)• Obstruction lighting system (ICAO standards)• Lightning protection kit• Horizontal cable gantries
Optimal Height:30 to 120m
Design Standards:TIA/EIA 222-G, AISC manual, CP3, BS8100, EUROCODE 3 PART 3-1
Materials:• Tubular legs ST 52-3• Angular braces and plates ST 37-2
Connections:Bolts (ISO 8.8, SAE Grade 5, or ASTM A-325) + flat washers, nuts and spring washers(5% hardware overage)
GalvanizingAll steel elements are hot-dipgalvanized (ASTM A123)
N / K TowerThree-Legged Towers withTubular Legs and Angular Braces
Anchoring:Anchor rods (ASTM F1554) used withleveling nuts or cast-in stubs and a positioning template
Ladder Construction:• Caged or open ladder with safety climbing line or rail installed inside the tower • Vertical cable hangers
Shipment:Standard 40' ISO container
Documentation:• Detailed packing list• Installation & maintenance• Foundation design guidelines