Upload
multitechpak
View
164
Download
3
Tags:
Embed Size (px)
DESCRIPTION
Multi Tech manufacturers parts & equipment for Tank Trucks with Top Loading and Bottom Loading with Vapor Recovery.
Citation preview
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
MHC-450-0916" Manhole Cover
FEATURES AND BENEFITS This type of Manhole Cover is specially design for Top Loading Tankers with very simple operation of loading and discharge with manual dip gauge.
Lightweight Galvanized Steel baseplate for increased payloads.
Fill cap 250mm (10”) aluminum construction for easy drop
pipe insertion when top loading.
Steel Bridges exceeds the requirements of the Australian DROP tests (AS 2809-2-1990).
Automatic Sealing The Vent is designed to close all
venting holes to avoid the dangerous spillage in case of Tanker Rollover.
Two stage opening allows safe release of residual
compartment pressure before fully opening fill cap.
Spring loaded The Fill cap is specially designed to provide higher venting flow of internal pressure when the tanker is exposed to fire situation.
Pressure and vacuum A well-designed Pressure &
Vacuum Vent is fitted on the lower side of Fill Cap, which provides pressure releasing, and vacuum breaking.
Emergency venting capacity 7000m3/h air at 350mb.
Installation 12 bolts fixing.
Security facility The Manhole Cover has locking facility.
WEIGHT 10.0Kg Recommended parts
Weld Ring WR-MHC-09 Gasket Weld Ring GWR-MHC-09 Additional External type Pressure & vacuum Vent PVV-70-20T
16”
MA
NH
OLE
CO
VER
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
16" FEATURES AND BENEFITS
MHC-450-01NMManhole Cover
This type of Manhole Cover is spe
ading and discharge with manual dicially design for Top Loading Tankers with very simple operation of p gauge. lo
Lightweight Aluminum baseplate for increased payloads.
Fill cap 250mm (10”) aluminum construction for easy
drop pipe insertion when top loading.
Aluminum exceeds the requirements of the Australian DROP tests (AS 2809-2-1990).
Automatic Sealing The Vent is designed to close all
venting holes to avoid the dangerous spillage in case of Tanker Rollover.
re before fully opening fill cap. Two stage opening allows safe release of residual compartment pressu
Spring loaded The Fill cap is specially designed to
provide higher venting flow of internal pressure when the tanker is exposed to fire situation.
ide of Fill Cap,
Pressure and vacuum A well-designed Pressure & Vacuum Vent is fitted on the lower swhich provides pressure releasing, and vacuum breaking.
Emergency venting capacity 7000m3/h air at 350mb.
Installation 12 bolts fixing.
Security facility The Manhole Cover has locking facility.
WEIGHT 10.0Kg
ded Recommen parts
Weld Ring WR-MHC-09 Gasket Weld Ring GWR-MHC-09 Additional External type Pressure & vacuum Vent PVV-70-20T
16”
MA
NH
OLE
CO
VER
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
Weld Ring 16” Steel FEATURES AND BENEFITS
WR-450-09
The Weld Ring is welded with Tanker’s Shell and the Manhole Cover is installed on the top.
16”
WEL
D R
ING
Construction The Body is made of Steel with the international stand sed for durability and performance
ard u
MountingManhole C
Th ing co witove s a s fixing is availa
e mountr. 12 hole
holes arend 24 hole
mpatible h 16” ble.
s thic .
Wall Thickne s 4 mm kness
eight : 4.00 Kg
Recommended parts
W
Gasket Manhole Cover RG-MHC-09 Mounting Bolts with Nut MB-MHC-09
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
MHC-560-0120" Manhole Cover
FEATURES AND BENEFITS This type of Manhole Cover is specially design for Bottom Loading Tankers. The fuel is being loaded and
nker. discharged from the bottom of the Ta
Lightweight Aluminum cast baseplate for increased payloads.
Fill cap 250mm (10”) aluminum construction for
easy drop pipe insertion when top loading.
Steel Bridges exceeds the requirements of the
Australian DROP tests (AS 2809-2-1990).
Automatic Sealing The Vent is designed to close all venting holes to avoid the dangerous spillage in case of Tanker Rollover.
Two stage opening allows safe release of residual
compartment pressure before fully opening fill cap.
Spring loaded The Fill cap is specially designed to provide higher venting flow of internal pressure when the tanker is exposed to fire situation.
Pressure and vacuum A well-designed Pressure &
Vacuum Vent is fitted on the lower side of Fill Cap, which provides pressure releasing, and vacuum breaking.
Emergency venting capacity 7000m3/h air at 350mb.
Installation 24 bolts fixing.
WE
c
IGHT 16.0Kg Re ommended parts
WR-560-MS Weld Ring Gasket Weld Ring GWR-560-01 Additional External type Pressure & vacuum Vent PVV-70-20T
20”
MA
NH
OLE
CO
VER
Specification Sheet
MHC-560-0320" Manhole Cover
FEATURES AND BENEFITS This type of Manhole Cover is specially design for Bottom Loading Tankers. The fuel is being loaded and discharged from the bottom of the Tanker.
Lightweight Aluminum cast baseplate for increased payloads.
Fill cap 250mm (10”) aluminum construction for
easy drop pipe insertion when top loading.
Aluminum Bridges exceeds the requirements of the Australian DROP tests (AS 2809-2-1990).
Automatic Sealing The Vent is designed to close
all venting holes to avoid the dangerous spillage in case of Tanker Rollover.
Two stage opening allows safe release of residual
compartment pressure before fully opening fill cap.
Spring loaded The Fill cap is specially designed to provide higher venting flow of internal pressure when the tanker is exposed to fire situation.
Pressure and vacuum A well-designed Pressure &
Vacuum Vent is fitted on the lower side of Fill Cap, which provides pressure releasing, and vacuum breaking.
Emergency venting capacity 7000m3/h air at
350mb.
Installation 24 bolts fixing.
WEIGHT 16.0Kg Recommended parts
Weld Ring WR-560-MS Gasket Weld Ring GWR-560-01
Additional External type Pressure & vacuum Vent PVV-70-20T
20”
MA
NH
OLE
CO
VER
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
Specification Sheet
MHC-560-03L20" Manhole Cover
FEATURES AND BENEFITS This type of Manhole Cover is specially design for Bottom Loading Tankers. The fuel is being loaded and discharged from the bottom of the Tanker.
Lightweight Aluminum cast baseplate for increased payloads.
Fill cap 250mm (10”) aluminum construction for
easy drop pipe insertion when top loading.
Aluminum Bridges exceeds the requirements of the Australian DROP tests (AS 2809-2-1990).
Automatic Sealing The Vent is designed to close
all venting holes to avoid the dangerous spillage in case of Tanker Rollover.
Two stage opening allows safe release of residual
compartment pressure before fully opening fill cap.
Spring loaded The Fill cap is specially designed to provide higher venting flow of internal pressure when the tanker is exposed to fire situation.
Pressure and vacuum A well-designed Pressure &
Vacuum Vent is fitted on the lower side of Fill Cap, which provides pressure releasing, and vacuum breaking.
Emergency venting capacity 7000m3/h air at
350mb.
Locking System Security locking system.
Installation 24 bolts fixing.
WEIGHT 16.0Kg Recommended parts
Weld Ring WR-560-MS
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
Gasket Weld Ring GWR-560-01 Additional External type Pressure & vacuum Vent PVV-70-20T
20”
MA
NH
OLE
CO
VER
Specification Sheet
MHC-560-03S20" Manhole Cover
FEATURES AND BENEFITS This type of Manhole Cover is specially design for Bottom Loading Tankers. The fuel is being loaded and discharged from the bottom of the Tanker.
Lightweight Steel baseplate for increased payloads.
Fill cap 250mm (10”) aluminum construction for
easy drop pipe insertion when top loading.
Steel Bridges exceeds the requirements of the Australian DROP tests (AS 2809-2-1990).
Automatic Sealing The Vent is designed to close
all venting holes to avoid the dangerous spillage in case of Tanker Rollover.
Two stage opening allows safe release of residual
compartment pressure before fully opening fill cap.
Spring loaded The Fill cap is specially designed to provide higher venting flow of internal pressure when the tanker is exposed to fire situation.
Pressure and vacuum A well-designed Pressure &
Vacuum Vent is fitted on the lower side of Fill Cap, which provides pressure releasing, and vacuum breaking.
Emergency venting capacity 7000m3/h air at
350mb.
Locking System Security locking system.
Installation 24 bolts fixing.
WEIGHT 16.0Kg Recommended parts
Weld Ring WR-560-MS
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
Gasket Weld Ring GWR-560-01 Additional External type Pressure & vacuum Vent PVV-70-20T
20”
MA
NH
OLE
CO
VER
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
WR-560-MSWeld Ring 20” Steel
URES AND BENEFITS FEAT
The Weld Ring is welded with Tanker’s Shell and the Manhole Cover is installed on the top.
Construction The Body is made of Steel with the
international standard used for durability and
performance
oles are compatible with 20” Manhole Cover. 12 holes and 24 holes fixing is
Mounting The mounting h
available.
ness 4 mm thickness Wall Thick .
Weight : 4.00 Kg Recommended parts
Gasket Manhole Cover RG-560-01 Mounting Bolts with Nut MB-MHC-09
20”
WEL
D R
ING
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
SF-BVM-09Sump Flange Bottom Valve
ENEFITS FEATURES AND B Th lve e is installed on the bottom. Sump Flange is welded with Tanker’s Shell and the Bottom Va
Construction The Body is made of Steel and
pressed to form the dome shape with the international standard used for durability andperformance
Mounting The mounting Studs are welded and
les. compatible with Bottom Valve Ho
Wall Thickness 8 mm thickness . We
ecommended parts
ight : 3.00 Kg
R
Gasket Upper Bottom Valve GU-BVM-09
SUM
P FL
AN
GE
BO
TTO
M V
ALV
E
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
BV-100-N-14" Pneumatic Bottom Valve
EATURES AND BENEFITS F This 4” Pneumatic Bottom Valve is specifically designed to ensure fast and safe discharge of Road
anker. The Valve is operated Pneumatically by using Pneumatic Control. T
The main Body, Poppet and Top Cup are made of Aluminum casted and tested on high pressure.
All the Pins ad Springs are made of Stainle
trouble free life. ss Steel for long
The Valve is fitted with multi lip
sealing properties and does not s Seal that provides good
allow any spillage in case of trapping small particles in Seal.
Wire mesh/Strainer made of Stainless Steel is fitted to
prevent the Seal and Poppet from any object inside the
Tanker.
s maximum
The internal design of Bottom Valve providedelivery area, which allows high flow rate.
ets TTMA and NTTC DOT 406 to limit Shear groove meproduct spillage in the event of an accident.
Closure by self-centering plunger and durable compression
spring.
Removable bonnet assembly enables seal change without removing valve from the tank
Double O-Ring Seals on cam shaft for improved sealing and
ease of maintenance.
WEIGHT 5.5 Kg
ommended parts Rec
Sump Flange S-BVM-100 Upper flange of BVM-100 GU-BVM-100 Gasket Gasket Lower flange of BVM-100 GL-BVM-100
PNEU
MA
TIC
BO
TTO
M V
ALV
E
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
BV-100-N-24" Pneumatic Bottom Valve
FEATURES AND BENEFITS This 4” Pneumatic Low Profile Bottom Valve is specifically designed to provide more space for piping arrangement and low centre of gravity. This valve designed to ensure fast and safe discharge of Road Tanker. The Valve is operated Pneumatically by using Pneumatic Control.
The main Body, Poppet and Top Cup are made of Aluminum casted and tested on high pressure.
All the Pins and Springs are made of Stainless Steel for long
trouble free life.
The Valve is fitted with multi lips Seal that provides good sealing properties and does not allow any spillage in case of trapping small particles in Seal.
Wire mesh/Strainer made of Stainless Steel is fitted to
prevent the Seal and Poppet from any object inside the Tanker.
The internal design of Bottom Valve provides maximum
delivery area, which allows high flow rate.
Shear groove meets TTMA and NTTC DOT 406 to limit product spillage in the event of an accident.
Closure by self-centering plunger and durable compression
spring.
Removable bonnet assembly enables seal change without removing valve from the tank
Double O-Ring Seals on cam shaft for improved sealing and
ease of maintenance.
WEIGHT 6.0 Kg Recommended parts
Sump Flange S-BVM-100 Gasket Upper flange of BVM-100 GU-BVM-100
Gasket Lower flange of BVM-100 GL-BVM-100
PNEU
MA
TIC
BO
TTO
M V
ALV
E
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
-100-094" Mechanical Bottom Valve
EA
BVM
TURES AND BENEFITS F
This nsure fast ker.
he Valve is operated Mechanically by using Operator and Steel Cables. 4” Mechanical Bottom Valve is specifically designed to e and safe discharge of Road Tan
T
The main Body, Poppet and Top Cup are made of Aluminum casted and tested on high pressure.
All the Pins ad Springs are made of Stainless Steel for long
trouble free life.
The Valve is fitted with multi lips Seal that provides good sealing properties and does not allow any spillage in case of trapping small particles in Seal.
Wire mesh/Strainer made of Stainless Steel is fitted to
prevent the Seal and Poppet from any object inside the Tanker.
The internal design of Bottom Valve provides maximum
delivery area, which allows high flow rate.
Shear groove meets TTMA and NTTC DOT 406 to limit product spillage in the event of an accident.
Closure by self-centering plunger and durable compression
spring.
Removable bonnet assembly enables seal change without removing valve from the tank
Double O-Ring Seals on cam shaft for improved sealing and
ease of maintenance.
ecommended parts
W
EIGHT 5.0Kg
R
Sump Flange S-BVM-100 Gasket Upper flange of BVM-100 GU-BVM-100 Gasket Lower flange of BVM-100 GL-BVM-100
MO-03-09 Mechanical Operator with No. of Lever Steel Wire with Cable with Length STC-BVM-09
MEC
HA
NIC
AL
BO
TTO
M V
ALV
E
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
MechanEATURES AND BENEFITS
MO-03-09ical Operator Bottom Valve
F The Mechanical Operator is used to operate the Mechanical Bottom Valves to open for discharge and to lose in emergency. It can operate 3 Bottom Valve.
c
f aluminum with theinternational standard used for durability and performance Construction The Body is made o
Mounting Easy to mount.
Spring Loaded Over centre cam design holds the levers
in the fully open position and enables one touch closure in the event of an emergency.
Emergency Shut Down In case of emergency all the
lever can be operate to shut down the valve by operating ble. one lever by ca
.
eight : 4.00 Kg
ecommended parts
W R
Cable Assy CA-MO-09 Emergency Operator M0-01-09
MEC
HA
NIC
AL
OPE
RA
TOR
BO
TTO
M V
ALV
E
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
Emergenc
EATURES AND BENEFITS
MO-01-09y Operator
F The Emergency Operator is used to operate the Mechanical Operator of Bottom Valves to close all the levers in emergency.
Construction The Body is made of aluminum with BrassLever with the international standard used for durability and performance
Mounting Easy to mount.
Spring Loaded Over centre cam design holds the levers
in the fully open position and enables one touch closure in the event of an emergency.
Emergency Shut Down In case of emergency all the
lever can be operate to shut down the valve by operating one lever by cable.
.
EMER
ATO
R
eight : 1.00 Kg
ecommended parts
W R
Cable Assy CA-MO-09 Mechanical Operator M0-03-09
ERG
ENC
Y O
P
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
C
EATURES AND BENEFITS
A-MO-09Cable Assy
F The Cable Assy is used to operate the Mechanical Operator of Bottom Valves.
Construction The Outer of Cable Assy is made of PVC Coated steel armoured with Stainless Steel Inner Cable for durability and performance
Mounting Easy to mount.
Length The normal length is 9 Meter per valve, however,
it can be customized as per requirement.
ed.
eight : 1.00 Kg
ecommended parts
Adjustment Adaptor Adjustment Adaptors for adjustment and installation will be provid
.
W R
CA
BLE
ASS
Y
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
F-API-09Flange API Adaptor
ATURES AND BENEFITS FE The Flange is welded with Discharge Pipe and API Adaptor is installed on the flange.
Construction The Body is made of Steel with the
international standard used for durability and performance
Mounting The mounting holes are compatible with
API Adaptor Holes.
Wall Thickness 8 mm thickness
.
Rec
Weight : 1.00 Kg
ommended parts
G-API-09 Gasket API R -09 Sight Glass SG-API
FLA
NG
E A
PI A
DA
PTO
R
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
SG-100-09Sight Glass
EATURES AND BENEFITS F The Sight Glass is installed between the API Adaptor and Flange. The purpose of using this Sight Glass is
provide the clear view of product presence, product and flow type. to
Construction The Body is made of PPMA.
Mounting The mounting holes are compatible with 4”
TTMA Flange.
Conforms to API RP1004 for total compatibility with API couplers.
Compatible with Petroleum products.
Recommended parts
Gasket API G-API-09 Mounting Flange MF-API-100
SIG
HT
GLA
SS
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
API-100-MAPI Adaptor
EATURES AND BENEFITS F The API Adaptors are manufactured in accordance with API RP 1004 with interchangeability with other rands of Adaptors. The Internal Construction is helped to provide very smooth and high volume flow.
b
Construction The main Body, Poppet and Cap are
made of Aluminum Cast and tested on high pressure.
API
AD
APT
OR
Pins The centering Pins and all other pins are made of Stainless Steel.
Spring The Springs are made of Stainless Steel.
Viton seals are standard for compatibility with high-
octane fuels and additives.
Product Sight Glass fitted at lvisual check of product in pipe-wo
owest point of valve for rk.(optionally)
Conforms to API RP1004 for total compatibility with API
couplers.
Two stage fixed Brass handle gives positive indication of
valve position.
Mounting The mounting flange of the adaptor meets the
specifications of TTMA 4”.
E
c
W IGHT 5.0Kg Re ommended parts
Dust Cap DC-API-M Gasket API G-API-01 SG-API-100 Sight Glass 100 Mounting Flange MF-API-
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
FEATURES AND BENEFITS
DC-API-09Dust Cap API Adaptor
The Dust Cap of API Adaptors are manufactured in accordance with API RP 1004 with interchangeability with other brands of Adaptors.
DU
ST C
AP
API
AD
APT
OR
Construction The main Body is made of Aluminum Cast
pressure.
and tested on high
Cam Lever The cam levers are made of Brass.
Seals are standard for compatibility with high-octane fuels and additives.
Conforms to API RP1004 for total compatibility with API
couplers.
Protects poppet face of API Adaptor and prolongs life of seals.
Heavy-duty steel chain supplied as standard for
attachment to API adaptor.
WEIGHT 1.50Kg
Rec
ommended parts
1 Gasket API G-API-0 s SG-API-100Sight Glas Mounting Flange MF-API-100
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
FEATURES AND BENEFITS
API-100-09API Adaptor W/ Sight Glass
The API A rs are manufactured in accordance dapto with API RP 1004 with interchangeability with other rands of Adaptors. The Internal Construction is helped to provide very smooth and high volume flow.
b
Construction The main Body, Poppet and Cap are
made of Aluminum Cast and tested on high pressure.
Pins The centering Pins and all other pins are made of
Stainless Steel.
Spring The Springs are made of Stainless Steel.
Viton seals are standard for compatibility with high-octane fuels and additives.
Product Sight Glass fitted at lowest point of valve for
visual check of product in pipe-work.
Conforms to API RP1004 for total compatibility with API couplers.
Two stage fixed Brass handle gives positiv
valve position. e indication of
Handle Tough Brass Handle
corrosion life. for durable and anti
Mounting The mounting flange of the adaptor meets the
specifications of TTMA 4”.
WEIGHT
4.0Kg
Rec
ommended parts
9 Dust Cap DC-API-0 G-API-09 Gasket API Sight Glass SG-API-100 Mounting Flange MF-API-100
API
AD
APT
OR
W/ S
IGH
T G
LASS
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
ust Cap API Adaptor DC-API-09
D FEATURES AND BENEFITS The Dust Cap of API Adaptors are manufactured in accordancewi other brands of Adaptors.
with API RP 1004 with interchangeability th
DU
ST C
AP
API
AD
APT
OR
ody is made of Aluminum Cast ted o
Construction The main Band tes n high pressure.
Cam Lever The cam levers are made of Brass.
Seals are standard for compatibility with high-octane fuels
and additives.
Conforms to API RP1004 for total compatibility with API couplers.
Protects poppet face of API Adaptor and prolongs life of
seals.
Heavy-duty steel chain supplied as standard for attachment to API adaptor.
WEIGHT 1.0Kg
Rec
ommended parts
PI-09 Gasket API G-A Sight Glass SG-API-100
0 Mounting Flange MF-API-10
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
GC-6x4-09Gravity Coupler
S AND BE FEATURE NEFITS The Gravity Couplers are manufactured in accordance with API RP 1004 with interchangeability with other rands of Adaptors. The Coupler is used to discharge the fuel from tanker with gravity. b
Construction The main Body is made of
Aluminum Cast and tested on high pressure.
Cam Lever The cam levers are made of Brass.
Seals are standard for compatibility with high-ditives. octane fuels and ad
Conforms to API RP1004 for total compatibility
with API couplers.
Heavy-duty steel chain supplied as standard for attachment to API adaptor.
EIGHT 2.0Kg
W
Recommended parts
Gasket API G-API-09 Sight Glass SG-API-100 Mounting Flange MF-API-100
GR
AVI
TY C
OU
PLER
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
E TS
GC-6x3-09Gravity Coupler
ATURES AND BENEFIF
The Gravity Couplers are manufactured in accordance with API RP 1004 with i
nds of Adaptors. Thenterchangeability with other
ra Coupler is used to discharge the fuel from tanker with gravity.
b
GR
AVI
TY C
OU
PLER
Construction The main Body is made of Aluminum Cast ted oand tes n high pressure.
Cam Lever The cam levers are made of Brass.
Seals are standard for compatibility with high-octane fuels
and additives.
Conforms to API RP1004 for total compatibility with API couplers.
Heavy-duty steel chain supplied as standard for
adaptor. attachment to API
EIGHT 2.0Kg
W
Recommended parts
Gasket API G-API-09 Sight Glass SG-API-100 Mounting Flange MF-API-100
Specification Sheet
For details contact [email protected] or www.multitech.20m.com ISO9001-2000
2” 2½” 3” 4”
A
COUPLER HOSE SHANK
5”
luminum ACHS2 ACHS2.5 ACHS3 ACHS4 ACHS5
BCHS5
Stainless Steel
Brass BCHS2 BCHS2.5 BCHS3 BCHS4
SCHS2 SCHS2.5 SCHS3 SCHS4 SCHS5
COUPLER HOSE SHANK
ADAPTOR HOSE SHANK
2” 2½” 3” 4” 5”
Aluminum
AAHS2 AAHS2.5 AAHS3 AAHS4 AAHS5
Brass BAHS2 BAHS2.5 BAHS3 BAHS4 BAHS5
Stainless Steel SAHS2 SAHS2.5 SAHS3 SAHS4 SAHS5
ADAPTOR HOSE SHANK
2” 2½” 3” 4” 5”
Aluminum
ADAPTOR MALE THREAD
AAMT2 AAMT2.5 AAMT3 AAMT4 AAMT5
BAMT4 BAMT5
Stainless Steel
Brass BAMT2 BAMT2.5 BAMT3
SAMT2 SA 5 SAMT3 SAMT4 SAMT5
ADAPTOR MALE THREAD
MT2.