MS5001 Gas Turbine
The MS5001 is one of the industrys most well-known gas turbines
in the 26-MW class. It is a single-shaft, heavy-duty unit with
exceptional reliability and availability proven in over 2,500
installations worldwide. With turbomachinery, gearbox and
alternator packaged in a single lift configuration, the MS5001 is
robustly designed and manufactured for a long service life with
easy operation and maintenance.
The perfect mix of
&StandardizationcustomizationGeneral Performance Data
50/60 Hz Power generation
Output 26.83 MW
Heat rate 12,687 Kj/kw (12,025 Ftu/kwh)
Pressure ratio 10.5:1
Mass flow 276.1 lb/sec (125.2 kg/sec)
Turbine speed 5,100 rpm
Exhaust temperature 901F (483C)
Model designation MS5001PA
GE Oil & Gas
CONFIGURATION NOTES
Inlet duct UP and FRONTVentilation system pressurizedVentilation
take-off segregatedVentilation system also provided to gearbox/loud
coupling compartmentON BASE enclosure
Altitude and max ambient temperature: Desert/dry environment:300
m @ 50C 300 m @ 55C1,000 m @ 47C 1,500 m @ 45C
Continental, cold winters, unusual snow storms:900 m @ 35C
Site temperature (min/max):Desert and coastal environment:
-5C/50CContinental, cold winters, unusual snow storms: -20C/35CSnow
load: max 200 kg/m2
Wind speed: max 120 mph
CONFIGURATION NOTES
Inlet duct UP and FRONTVentiliation system
pressurizedVentilation take-off segregatedVentilation system also
provided to gearbox/loud coupling compartmentON BASE enclosure
Altitude and max ambient temperature:Desert/dry environment:300
m @ 50C 300 m @ 55C1,000 m @ 47C 1,500 m @ 45C
Continental, cold winters/unusual snow storms:900 m @ 35C
Site temperature (min/max):Desert and coastal environment:
-5C/50CContinental, cold winters/unusual snow storms: -20C/35CSnow
load: max 200 kg/m2
Wind speed: max 120 mph
TECHNICAL OPTIONS
Material:Carbon steelAISI304AISI316L
Silencer material:AISI304AISI316L
Welding:ASME IXASME IX+DEP
Enclosure type:On base
Sound pressure level:85 dBa
Insulation:InternalExternal
Bolts and nuts:ANSI B1.1ISO std
CONFIGURATION NOTES
Site temperature:Min. ambient temperature: -20CSnow load: max
200 kg/m2
Wind speed: max 120 mph
Welding:ASME IXASME IX+DEP
Enclosure type:On base
Sound pressure level:85 dBa
TECHNICAL OPTIONS
Exhaust plenum
arrangement:VERTICALHORIZONTAL-RIGHTHORIZONTAL-LEFT
Exhaust system height:VERTICAL: 18 mHORIZONTAL-RIGHT: 15/30/45
mHORIZONTAL-LEFT: 15/30/45 m
Exhaust system material:C.S. OUTER + AISI409 INNER
Exhaust system silencer numbers:12
Exhaust system stack insulation:Internal
TECHNICAL OPTIONS
Filter house type:Pulse jetStatic multistage
Environment: Desert/dry environmentContinental, cold winters
/unusual snow stormsSeaside/not foggy Tropical/very humid/not
dustyDesert/coastal/heavy fogs
Inlet bleed heating:YesNo
Pre-assembly:YesNo
Pulse air from:CustomerGT axial compressor
Painting/surface treatment:SS paintedSS not painted
Material:Carbon steelAISI304LAISI316L
Bolts and nuts:ANSI B1.1ISO std
Combustion system:Standard single gasDLN-1Standard dual fuel
The MS5001 is well suited for power generation in simple and
combined cycles and can be packaged in tailor-made
configurations.
With a combustion system available in diffusive or DLN mode, the
MS5001 can operate on the broadest range of fuel gas compositions,
including dual-fuel capability.
An API standard mechanical running test is performed on every
unit we produce, with optional string test (no load or full load)
available on request. Filter house Inlet duct
Exhaust ductMS5001 Gas Turbine
&RuggedReliable
GE Oil & Gas
Global HeadquartersVia Felice Matteucci, 250127 Florence, ItalyT
+39 055 423 211F +39 055 423
[email protected] Pignone S.p.A.Nuovo Pignone
S.r.l
Americas Regional Headquarters4424 West Sam Houston Parkway
NorthHouston, Texas 77041P.O. Box 2291Houston, Texas 77252-2291T +1
713 683 2400F +1 713 683 2421
For complete contact information, please refer to our
website.
ge.com/oilandgas
The information contained herein is general in natureand is not
intended for specific construction, installationor application
purposes. GE reserves the right to makechanges in specifications or
add improvements at anytime without notice or obligation.
GE, the GE Monogram, and imagination at work are registered
trademarks of the General Electric Company.
2012 General Electric CompanyAll Rights Reserved
GE_ProductStructuring_MS5001_FS_012512
GE imagination at work
