ELECTRICAL WIRE AND CABLE CUTTING SYSTEM

DURABLE & RELIABLE CUTTING SYSTEM

COMPACT

USER-FRIENDLY DESIGN

COMPETITIVE PRICE

For wire harness manufacturers

MRO CUT

LASELEC INC • 2605 N. Forum Drive • Grand Prairie, TX 75052 • USA Tel: (+1) 817 460-7830 • Fax: (+1) 817 460-7844 • infousa@laselec.com • www.laselec.com

THE BENEFITS OF THE MRO CUT¤ EASY TO INSTALL with little restriction on location¤¤ Excellent MOBILITY thanks to four lockable wheels¤ USER-FRIENDLY DESIGN¤ HIGH PRODUCTIVITY of up to 60m per minute¤ MINIMAL USER INTERVENTION¤ Compatible with MANY TYPES OF CABLES (from gauges6 to 26, twisted, jacketed and non-jacketed, etc.)¤ AUTOMATIC SORTING OF DATA according to productionmodes¤ AUTOMATIC CUTTING with protection tape, notably fortwisted cables, to prevent fraying¤ AUTOMATIC HALT TO PRODUCTION in case of cableblockage, opening of safety hood or any other fault¤ MOTORISED coiling pan¤ Conforms to AERONAUTICAL INDUSTRY STANDARDS withregards to the cutting of 26 AWG wires to 6 AWG wires¤ Conforms to EC DIRECTIVES on “working equipment” and toEC STANDARDS

AVAILABLE FUNCTIONS¤ Coiling pan available in various diameters¤ High-de�nition label printer¤ Traceability with bar code reader¤ Automatic detection of faults by optical sensor (knots,cut cables, etc.)¤ EasyHelp telemaintenance kit

Non-contractual photos. Above specifications are subject to change without prior notice.

The cutting specifications can be automatically down-loaded from the production data �les (downloadable viacompany network, �ash drive, etc.).A rework mode (manual input) is also included in the software for smaller volume production.EasyCut software and the various proposed options (traceability, label printing, etc.) are fully compatible with the ULYS Modena and MRO200 range of products.MRO CUT can be easily upgraded into a MRO200 laser wire marker later on.

GENERAL SPECIFICATIONS¤ (90 PSI) compressed air¤ Cable tension control¤ Operating temperature: +15°C to +32°C (60°F-90°F)¤ Storage temperature: +1°C to +45°C (34°F-113°F)¤ Maximum humidity: 80%¤ Multilingual software

THE MRO CUT MACHINE OFFERS AGLOBAL AND AUTOMATIC SOLUTIONFOR CUTTING ELECTRICAL WIRESAND CABLES AT A SPECIFICLENGTH.

to MRO200-B / S / XSUV laser wire & cable identification systems

UPGRADABLE MRO CUT