THERMAL CYCLERPLATE SEALERGEL BOXESBLOTTINGPOWER SUPPLIESTRANSILLUMINATORSGEL DOCUMENTATION

MOLECULAR BIOLOGY &ELECTROPHORESIS

Productos para Laboratorio

MO

LEC

ULA

R B

IOLO

GY

- WO

RK

FLO

W

MO

LEC

ULA

R B

IOLO

GY

- TH

ER

MA

L C

YC

LER

Labnet has a complete offering of general laboratory equipment for the Molecular Biology Workflow that includes

microtube and Plate Spinner centrifuges for PCR sample preparation, liquid handling for transfer of valuable samples,

thermal cycler and plate sealer for running PCR and electrophoresis and gel documentation systems for validating the

results. Each of these components were designed for optimal performance and ease of use. For additonal information

please visit our website or call Labnet customer service.

Molecular Biology Workflow

Sample Prep: Prism High Speed Microcentrifuge, C2500

PCR Prep: MPS1000 Plate Spinner, C1000

PCR: Optimax Thermal Cycler, TC9610 & Plate Sealer, PS1000

Validation: GDS Gel Document System, GDS-1302 & Horizontal Gel Box, E1010-10

In between steps: BioPette Plus Autoclavable Pipettes

MultiGene™ Mini Personal Thermal Cycler

The MultiGene Mini combines a versatile and precise cycling unit with fast ramping, up to 5ºC/second. Not limited to the amplification of nucleic acids, the unit is also useful for enzymatic digestion, ligation, and other procedures that require temperature controlled incubation of small samples.

In addition to the standard parameters of time and temperature, the software also allows for successive time and temperature increments and decrements (for touchdown amplification and auto-extension), auto-restart after a power failure, end of cycling elongation steps and extended soaks at 4ºC.

Programming the MultiGene Mini is simple and intuitive. The control pad combines function keys, a key pad and arrow keys for easy navigation and entering of parameters. The large graphical display is easy to read.

The MultiGene Mini is available with either a 24 x 0.2 mL tube block or 18 x 0.5 mL tube block. Blocks are easily interchanged. The MultiGene Mini is supplied with a heated lid.

Licensed for

PCR

SPECIFICATIONS

Block Capacity 24 x 0.2 mL or 18 x 0.5 mL tubes Max. number segments 9

Temp. control range 4° to 99°C Max. holding time/step 99 minutes 59 seconds Max Heating/cool rate 5ºC per sec/4ºC per sec Program storage up to 100 programs

Accuracy/uniformity ±0.3ºC/±0.5º at 55ºC Dimensions (W x D x H) 21.8 x 28.5 x 17.8 cm Heated lid temperature 105°C Weight 7.1 lbs/3.2 kg

Max. number of cycles 99 Electrical 230V~ or 120V~, 50/60 Hz

CSA Compliant

CAT NO. DESCRIPTION

TC020-24* MultiGene Mini Personal Thermal Cycler with 24 x 0.2 mL tube block, 120V

TC050-18* MultiGene Mini Personal Thermal Cycler with 18 x 0.5 mL tube block, 120V

*To order 230V units add -230V to the end of the catalog number. 230V units includes EU and UK cords.

Productos para Laboratorio

MO

LEC

ULA

R B

IOLO

GY

- TH

ER

MA

L C

YC

LER

MO

LEC

ULA

R B

IOLO

GY

- TH

ER

MA

L C

YC

LER

MultiGene™ OptiMax Thermal Cycler

The MultiGene OptiMax Thermal Cycler delivers advanced speed and features while providing premium performance at an affordable price. This simple to program unit is compact in design and built to perform. Programming is intuitive with the large display and multiple pre-programmed templates supplied with unit. The OptiMax comes with standard built in 2-step, temperature optimization, touchdown and time increment protocols that are easy to adjust to meet your cycling needs. You can select lid temperature or turn it off depending on your needs. The faster ramp rates allow more work to be done in a work day.

Additonally, The MultiGene OptiMax employs a new protocol optimization process improving on older gradient features. This “Better than Gradient” capability allows users to select up to 6 distinct annealing temperatures to be run simultaneously. This is ideal for method optimization as well as applications like genotyping.

SPECIFICATIONS

Sample Capacity 1 x 96 well plate, 12 8 x 0.2mL strip tubes, 96 x 0.2mL tubes

Programmable Temperature Range 4°C to 99.9°C

Temperature Control Calculated or block

Temperature Accuracy/Uniformity ±0.5°C/±0.5°C

Optimization temperature range 30°C to 99°C. Annealing Temperatures of each 6-segment block can be set independently.

Maximum Temperature difference between each 6-segment temperature block 24°C

Orientation 6 segmented block each 4 x 4 wells in size

Programmable lid temperature 60° to 65°C, 100° to 115°C or off

Program memory 200 complete programs

Temp. increments/decrements Yes

Time increments/decrements Yes

User program folders 50 sets

Password protected programs Yes

Dimensions (W x D x H) 9.4 x 16.5 x 9.8 in/ 24 x 42 x 25 cm

Weight 19.8 lbs/9 kg

Electrical 240V or 120V, 50/60 Hz

Ramp Rates High 5°C heating/ 3.5°C cooling

Low 3°C heating/ 2°C cooling

Sample volume range 5-100µl

Warranty 3 Years

Display LCD

Licensed for

PCR

CSA Compliant

The Labnet MultiGene OptiMax is ideal for streamlining the genotyping workflow. A typical genotyping experiment requires the ability to evaluate multiple transgenes in a single animal. In an existing gradient thermal cycler verifying the integrity of your line requires three separate runs/experiments to achieve what the MultiGene OptiMax allows in one method. This is achieved by assigning the appropriate annealing temperatures for each gene in each peltier block (up to 6 different ones) and running that method. Results have confirmed that the data generated in the MultiGene OptiMax were comparable to running 3 individual runs/experiments thereby saving time and reagents and making for a greater efficiency in the workflow.

Download a copy of the application note. “Streamlining the Genotyping Workflow with the MultiGene OptiMax” at www.labnetinternational.com

The 6 distinctive blue and black peltier elements on the 96 well block can each be set to a unique and distinctive annealing temperature in your single method.

CAT NO. DESCRIPTION

TC9610 MultiGene OptiMax with 96 well block, 120V

TC9610-230 MultiGene OptiMax with 96 well block, 230V

TC96-CM-10 Compression mat, Silicone, pk of 10

Productos para Laboratorio

ELE

CTR

OP

HO

RE

SIS

- P

LATE

SE

ALE

R

ELE

CTR

OP

HO

RE

SIS

- P

LATE

SE

ALE

R

PS1000-GP300 Easy to use, paper backed general purpose film is peelable and good

for low temperature compound storage and PCR plates

100 films/case

PS1000-100 Clear polyester backed film forms a weld seal to PP microplates. Good

optical characteristics make it suitable for QPCR

100 films/unit

5 units/case

PS1000-150 Clear polyester backed film forms a peelable seal to PP, PS and COC

microplates. Good optical characteristics make it suitable for QPCR

100 films/unit

5 units/case

PS1000-200 Peelable film is ideal for PP and COC microplates. It can be peeled

directly from the freezer. Provides a good barrier resistance to aqueous

solutions and moderate resistance to solvents at room temperature.

100 films/unit

5 units/case

PS1000-300 Forms a weld seal to PE plates. Good for low temperature compound

storage and PCR. Aluminum foil film ideal for use with PP plates. It

is a very strong pierce seal that provides a high degree of sample

protection and good solvent resistance to DMSO when stored at room

temperature or below.

100 films/unit

5 units/case

PS1000-400 Peelable film good for PP and COC microplates. Can be peeled directly

from the freezer. Ideal for low and room temperature compound

storage. Forms a weld seal to PE plates. Good barrier resistance to

aqueous solutions and solvents especially DMSO at room temperature

or below.

100 films/case

5 units/case

AccuSeal™ Semi Automated Plate Sealer

Labnet’s new AccuSeal semi automated plate sealer is ideal for the low to medium throughput laboratory that requires uniform and consistent sealing of microplates. Offering complete versatility, the AccuSeal will accept a full range of plates for PCR, assay or storage applications, and can be used for standard height to deep well plates. Operation is easy. Sealing parameters are set and displayed via the user-friendly control panel, and the sealing operation is automated to guarantee consistent results.

Controls and Operation:

The AccuSeal’s control system allows optimal settings for all types of plates and sealing material. Sealing time (in 0.1 second increments), and sealing temperature (in 1.0°C increments) can be accurately set using the control knob.

Operation is simple: Place a microplate with a sealing film onto the drawer. Press the “SEAL” button and the motorized drawer will automatically close, the heated sealing platen will press down on the seal, and then the drawer will open to present the sealed plate.

Versatility and Convenience:

Labnet’s AccuSeal can accept a variety of plate heights – the AccuSeal adapter is used for assay plates and PCR plates. The motorized heated platen adjusts automatically for different height plates, and provides uniform pressure to ensure a quality seal.

SPECIFICATIONS

Dimensions (W x D x H) 6.75 x 12.75 x 14.25 in/17.1 x 32.4 x 36.2 cm Weight 27 lbs / 12 kg

Sealing Temperature OFF, 100 ºC to 190ºC, (increments of 1.0ºC)

Temperature Accuracy +/- 1.0 ºC

Temperature Uniformity +/- 1.0 ºC

Sealing Time 0.5 to 10 sec. (increments of 0.1 sec)

Compatible Plate Materials PP (Polypropylene)

PS (Polystyrene)

PE (Polyethylene)

Compatible Plate Types Standard Assay Plates, Deep-Well Plates, PCR Plates

Maximum Plate Height 45mm

CSA CompliantAccuSeal™ Heat Sealing Films

Recommended sealing temperature and time for all PP microplates is 175ºC and 3 seconds. TIme and temperature can vary depending upon combination of film and microplates being utilized.

Labnet offers a full range of heat sealing films optimized for use in the Accuseal plate sealer. Please utilize the following guide to find out which film is best for your application.

CAT NO. DESCRIPTION

PS1000* AccuSeal Semi Automated Plate Sealer, includes adapters for standard and deepwell microplates, 120V

PS1000-PCR Accuseal Adapter for sealing assay and PCR plates

PS1000-ADAPT Accuseal Adaptor for sealing assay plates and plates needing more support

*To order 230V units add -230V to the end of the catalog number. 230V units includes EU and UK cords.

Productos para Laboratorio

SPECIFICATIONS Enduro 7.7 Enduro 7.10 Enduro 10.10 Enduro 15.10 Enduro 15.15 Enduro 20.20Gel (W x L cm) 7 x 7 7 x 10 10 x 10 15 x 10 15 x 15 20 x 20 Unit (W x L x H cm) 9 x 21 x 9 9 x 21 x 9 12.5 x 22 x 9 17.5 x 26.5 x 9 17.5 x 26.5 x 9 23 x 39.5 x 9 Buffer volume 225 mL 225 mL 300 mL 500 mL 500 mL 1,200 mLMax sample capacity 32 64 100 140 210 450Supplied combs 8 tooth (2) 8 tooth (3) 10* tooth (2) 16* tooth (1) 16* tooth (1) 20 tooth* (2)

20 tooth (1) 28* tooth (1) 40 tooth* (2)20 tooth (1)

SPECIFICATIONS Enduro 96 Enduro 7 Enduro 10 Enduro 15 Enduro 20BiCaster BiCaster TriCaster BiCaster

Gel (W x L cm) 10 x 12 7 x 10 15 x 10 15 x 15 20 x 20Unit (W x L x H cm) 12.5 x 22 x 9 9 x 21 x 9 17.5 x 26.5 x 9 17.5 x 26.5 x 9 23 x 39.5 x 9Buffer volume 300mL 225 mL 500 mL 500 mL 1,200 mLMax sample capacity 96 plus 64 140 210 450Supplied combs 96 well 1 mm 8 tooth (3) 16* tooth (1) 16* tooth (1) 20 tooth* (2)

20 tooth (1) 28* tooth (1) 40 tooth* (2)Supplied Casting Trays 7 x 7, 7 x 10 10 x 7, 15 x 7 20 x 10

10 x 10 15 x 10 20 x 20 15 x 15*Denotes multichannel compatible combs

ELE

CTR

OP

HO

RE

SIS

- G

EL

BO

XE

S

ELE

CTR

OP

HO

RE

SIS

- G

EL

BO

XE

S

ENDURO™ Gel XL - A Complete Electrophoresis System

The compact design of ENDURO Gel XL results in a much smaller

footprint than that of traditional gel boxes and power supplies. The

150V power supply connects directly into the gel box, eliminating

tangled leads. Casting gels is quick and easy - place the gel tray

in the stand, slide the comb into the slots and pour. Combs are

multichannel compatible and gel trays are UV transparent.

The molded gel tank provides leak-proof performance while the

vented lid aids in dispersing heat. For safety, a magnetic sensor

recognizes the presence or absence of the lid and allows current

to flow accordingly. Operating parameters are set digitally, including

amperage and voltage with automatic crossover. A run can be

paused at any time and the parameters changed. A micro casting

set for four 6 x 6 cm gels is available separately.

SPECIFICATIONS

Output voltage/current 10V to 150V/10 - 400 mA

Timer 0 - 99 hr or continuous, audible alert

Overall Dimensions (W x D x H) 10 x 6.7 x 2.5 in./24.5 x 17 x 6.2 cm

Gel Capacity 1 large (12.5 x 12 cm), 2 small (12.5 x 6 cm), 4 micro (6 x 6 cm)

Program memory Last programmed parameters saved

Electrical Universal 100V- 240V, 50/60 Hz

CSA CompliantENDURO™ Horizontal Gel Boxes

The ENDURO Horizontal Gel Boxes have been designed with safety and ease of use in mind. Constructed of quality materials, they stand up to everyday use and provide a long, trouble-free service life.

The gel boxes are molded from UV transparent acrylic, for leakproof performance. Cassettes enclose the electrodes to protect them from breakage and allow for easy cleaning and replacement.

Rubber casting gates fit easily onto the gel trays for tape-free gel casting. Positioning slots on the sides of the trays hold combs in place while pouring gels. The supplied combs are 1.5 mm thick and are adjustable to control well depth.

Each gel tray is supplied with a Wellcomb Mat that can be placed underneath to aid in visualizing wells when loading. The domed lid and drip ring prevent condensation from falling onto the gel.

The Enduro line includes a full range of sizes, from a compact mini system to a large system that accommodates as many as 450 samples. Additional gel trays and different sizes of combs are available as well as Enduro™ molecular weight markers. New are the Bicaster and Tricaster models that provide casting trays for multiple sized gels in a single package.

CSA Compliant

CAT NO. DESCRIPTION

E0160* ENDURO Gel XL, with standard casting set (E0168), gel tank with safety lid and power supply

E0161 Large Gel Tray Set (12.5 x 12 cm), pk of 2

E0162 Small Gel Tray Set (12.5 x 6 cm), pk of 2

E0163 Micro Gel Tray Set (6 x 6 cm), pk of 4

E0164 Large Comb Set, 14/28 teeth, reversible, pk of 2

E0165 Micro Comb Set, 5/8 teeth, reversible, pk of 2

E0166 Micro Casting Set, includes 4 micro gel trays, 2 micro combs and a casting stand

E0167 Casting Stand, for all gel sizes

E0168 Standard Casting Set, includes 1 large and 2 small gel trays, 4 large combs and a casting stand

*To order 230V units add -230V to the end of the catalog number. Specify cord type by adding -EU or -UK.

To order 120V units for Canada add -CAN to the end of the catalog number.

CAT NO. DESCRIPTION

R1000-10BP ENDURO MW Marker, 10bp ladder (100-2,000 bp), 0.1 µg/µl, 500 µl vial

R1000-1KB ENDURO MW Marker, 1 kb ladder (300-10,000 bp), 0.1 µg/µl, 500 µl vial

E1007-7 ENDURO 7.7 Horizontal Gel Box

E1007-10 ENDURO 7.10 Horizontal Gel Box

E1010-10 ENDURO 10.10 Horizontal Gel Box

E1015-10 ENDURO 15.10 Horizontal Gel Box

E1015-15 ENDURO 15.15 Horizontal Gel Box

E1020-20 ENDURO 20.20 Horizontal Gel Box

E1010-9611 ENDURO 96

E1007-BI ENDURO 7cm Horizontal Gel Box with 2 casting trays

E1010-BI ENDURO 10cm Horizontal Gel Box with 2 casting trays

E1015-TRI ENDURO 15cm Horizontal Gel Box with 3 casting trays

E1020-BI ENDURO 20cm Horizontal Gel Box with 2 casting trays

**Labnet offers a wide range of combs, spacers and other accessories for your electrophoresis needs.

They are available on our website or by requesting our ENDURO Full Line electrophoresis catalog. Productos para Laboratorio

ELE

CTR

OP

HO

RE

SIS

- G

EL

BO

XE

S

ELE

CTR

OP

HO

RE

SIS

- G

EL

BO

XE

S

CSA Compliant ENDURO™ VE 20 Vertical Gel System

The ENDURO VE20 is Labnet’s new large format vertical gel electrophoresis system. Designed to perform a variety of separations, including first and second-dimension SDS-PAGE, native, preparative, gradient, high-resolution nucleic acid electrophoresis and electroblotting, the VE20 is one of the most versatile large format vertical systems available.

The VE20 distinguishes itself in its flexibility of applications, ease of gel casting and set-up requiring only 4 screws to secure 4 (16 x 17.5 cm) gels. The VE20 vertical screw-clamp configuration distributes pressure evenly along the height of the gel rather than in the center to eliminate plate bowing and gel compression. The new configuration still maintains a leak-proof seal during casting; while the ergonomic wave-like design of the PAGE insert aids both handling and set up.

Whether it is running 2 or 4 gels, electroblotting or IEF using IPG strips, all of these techniques may be performed using the same base unit while retaining the benefits provided by large format electrophoresis, such as extended separation distances, greater sample throughput and superior resolution. Whatever your large format gel requirements are, the VE20 can be made to meet them.

SPECIFICATIONS

Plate dimensions: (W x H x D) 20 x 20 x 0.4 cm

Standard spacer dimensions: (W x H) 2 x 20 cm

IPG spacer dimensions: (W x H) 0.6 x 20 cm

Unit dimensions: (W x H x D) 30 x 27 x 18 cm

Unit deight 5.5 lbs/ 2.5 kg

Number of gels 1-4

Total volume inner buffer chamber 640 mL

Total buffer Volume for 2 gels 5.3 L

Total buffer Volume for 4 gels 4.8 L

Std run time without cooling 4-5 hours

Std run time with cooling 3-4 hours

CSA CompliantENDURO™ VE 10 Vertical Gel System

Labnet’s ENDURO Modular Mini Vertical Gel System for protein electrophoresis is ideal for screening new samples and evaluating sample preparation conditions. It is a great research tool that can run a maximum of 4 gels within an hour. These gels can be either custom cast or pre-cast. The same system allows for either PAGE or Electroblotting to be carried out in the same tank by changing the insert.

Each VE10 electrophoresis system can accommodate up to 4 handcast gels and 2 commercial precast gels to provide complete flexibility for individual research needs. The unique sliding clamp technology within the PAGE insert facilitates fast, intuitive leak-free casting. Reversible combs also serve as loading indicators to aid pipette-well alignment, preventing sample loading errors. Insert your comb into a freshly poured gel which is allowed to set before inverting the comb to use a loading template that sits conveniently above the newly formed sample wells.

With easy set up and reliable performance, the VE10 Mini Vertical systems are perfect for today’s laboratories where the ability to generate reproducible results quickly is of prime importance.

SPECIFICATIONS

Number of gels (Handcast) 1-4

Precast gel compatability Novex®, SERVAGel™,Thermo Precise

(Up to 2 gels/run) Pierce Protein Gel, BIO-RAD MiniPROTEAN® Precast gels.

Glass Plate Dimensions (W x H x T) 10x10x0.2 cm

Gel Dimensions (W X H) 8 x 8.5 cm

Total buffer volume Min 250mL Max 1200mL

Standard run time for SDS-Page 1-2 hours at from 90-225V

Unit Dimensions (W x H) 19 x 13 x 15 cm

Unit Weight 1.8Kg CAT NO. DESCRIPTION

E2020 ENDURO VE20 Vertical Gel System includes glass plates, 2 x 24 well combs, cooling coil and casting base

E2020-CU ENDURO VE20 Dual Casting System 2 sets of glass plates, 1 mm thick bonded spacers, 2 x 24 well 1 mm

thick combs, cooling coil, dummy plate and caster with external

E2120-EC ENDURO VE20 External Casting Stand

E2120-CAST ENDURO VE20 Casting Base

E2120-PI ENDURO VE20 Page insert

E2120-CC ENDURO VE20 Detachable Cooling Coil

E2120-RM ENDURO VE20 Replacement Rubber mats for 20 x 20 cm caster.

E2120-MCB ENDURO VE20 Maxi Cooling Block

E2120-CC ENDURO VE20 Detachable Cooling Coil

E2120-LD VE20 lid (No cables)

*Labnet offers a wide range of combs, spacers and other accessories for your electrophoresis needs.

They are available on our website or by requesting our ENDURO Full Line electrophoresis catalog.

*Labnet offers a wide range of combs, spacers and other accessories for your electrophoresis needs. They are available on our

website or by requesting our ENDURO Full Line electrophoresis catalog.

CAT NO. DESCRIPTION

E2010-PA ENDURO VE10 PAGE system, includes PAGE insert, buffer tank with leads and cooling pack

E2010-PBA ENDURO VE 10 PAGE system with Electroblotting Insert . (E2010-BM + E2010-PA)

E2010-PCA ENDURO PAGE casting system

E2010-BM ENDURO VE10 Electro blotting Module for use with VE10 vertical gel system, includes 4

cassettes and 8 fiber pads

Productos para Laboratorio

ELE

CTR

OP

HO

RE

SIS

-BLO

TTIN

G

ELE

CTR

OP

HO

RE

SIS

- B

LOTT

ING

ENDURO™ Semi Dry Blotter

The ENDURO Semi Dry Blotter offers rapid transfer times for DNA, RNA and protein blotting – typically 15 to 30 minutes. Western , Northern and Southern Blots can be easily accomplished via uncomplicated buffer and set up procedures. The Semi Dry Blotter is compatible with gel thicknesses from 0.25 mm up to 10 mm without the need for additional equipment.

The Semi Dry Blotter has the added benefit of economic transfers due to very low buffer volumes – typically only a few mill i l iters of buffer is required per transfer. The SemiDry Blotter utilizes a screw down lid, which secures the blot sandwich and allows complete control of pressure ensuring even transfer. The electrodes, comprising platinum coated anode and stainless steel cathode, will exhibit practically no corrosion therefor providing many years of trouble free use. Uniform heat dispersion across the blot sandwich ensures stable transfer times and no heat induced sample loss or transfer distortions. Electrode plates are fully separated to prevent arcing or damage.

SPECIFICATIONS

Dimensions (L x W x H) 12.8 x 9.8 x 2.2 in

32.5 x 25 x 5.5 cm

Recommended current .8mA / cm2

Active transfer area 20 x 20 cm

Weight 3 lbs/1.4 kg

Buffer volume 20 mL

Sample capacity

4 Blots: 8 x 8.5 cm

2 Blots: 16 x 8.5 cm

1 Blot: 16 x 17.5 cm

Run time 15 - 30 min

The ENDURO VE20 blotter has a large capacity that can hold up to 16 mini-gels or 4 large format gels. The VE20 electroblotting system provides all necessary components for performing transfers from vertical slab gels. It comes with tank, lid, platinum wire electrodes, 4 cassettes, 18 fiber pads and cooling coil. It has interchangeable modular inserts that can combine with VE20 vertical PAGE to use the same universal tank and lid. Complete flexibility is provided as the VE20 can be run with most power settings required. It can perform overnight transfers at voltages as low as 35V and rapid, high-intensity transfers up to 200V in 1-2 hours.

The VE20 comes standard with platinum wire electrodes 8 cm apart for increased capacity. A high intensity insert with plate electrodes 4 cm apart for rapid transfers is also available, E2020-HITB. The detachable cooling coil, which connects to the laboratory water supply or a recirculating chiller, prevents buffer depletion to allow overnight transfers and fast high-intensity blots. It also maintains the low temperatures important for protein stability during native transfers. The open design and rigid cassettes maximize current transfer and eliminate ‘shadow band’ formation. Color-coded cassettes prevent polarity reversal ensuring proper blotting. This is a well thought out high capacity tank blotter and a great value.

ENDURO™ VE 10 Blotter

This ENDURO VE10 blotter has a 4 mini gel (10 x 10 cm) capacity and can be purchased either as a stand-alone tank blotter or part of an integrated mini-gel/blotting system utilizing one shared tank.

This electroblotting system includes tank, blotting inserts and 4 cassettes with fiber pads.

ENDURO™ VE 20 Blotter

CAT NO. DESCRIPTION

E2020-SDB ENDURO Semi Dry Blotter for Western, Southern and Northern Blots

E2020-SDBPS* ENDURO Semi Dry Blotter/ 250V Power Supply Kit -115V

E0203* ENDURO Model 250V Power Supply 250V, 3A, 300W programmable with timer

R1000-10BP ENDURO MW Marker, 10bp ladder (100 - 2,000 bp), 0.1µg/µl, 500 µl vial

R1000-1KB ENDURO MW Marker, 1 kb ladder (300 - 10,000 bp), 0.1µg/µl, 500 µl via

*To order 230V add -230V to end of catalog number.

CAT NO. DESCRIPTION

E2020-TB ENDURO VE20 Blotting System, system Including tank and lid, 4 cassettes, 18 fibre pads, cooling coil

E2020-TBI ENDURO VE20 Maxi Platinum Wire Blotting Inset, 4x compression cassettes and 18x fibre pads

E2120-TBC ENDURO VE20 Blot Maxi Cassette

E2120-TBFP Fibre pads - pk of 6

E2020-HITB ENDURO VE20 HS Blotting System, High Intensity System including tank and lid, 1 casettes, 6 fiber pads, cooling coil

E2120-HITBI ENDURO VE20 HS Blotting System High intensity insert - includes 1 casette and 6 fibre pads

E2120-CC ENDURO VE20 Detachable Cooling Coil

E2120-LD VE20 lid (No cables)

E2120-T VE20 Tank

*specifications based on VE20, see page 63

CAT NO. DESCRIPTION

E2010-BT ENDURO Electroblotting System, includes tank, blotting insert & 4 cassettes

E2010-BM Mini Vertical Electroblotting Module for use with mini vertical gel system, includes 4 cassettes and 8 fiber pads

E2010-PMA* Mini Vertical PAGE module for use with mini vertical gel system.

E2110-B-MC Blotting Cassette

E2110-B-FP Fiber Blotting Pads, pack of 8 pads

E2110-CP Mini Cooling Pack for use with mini vertical gel system

*Glass plates, combs & caster not included.

**specifications based on VE10, see page 62

Productos para Laboratorio

Start Run End RunGel Size (W x L x H)

# of Gels

Voltage CST Current CST Voltage CST Current CST Run Time

Power Supply

SDS-PAGE, SECOND-DIMENSION 2DVE10 80 x 85 x 1 mm 2-4 200v ✓ 120-

240mA200v ✓ 120mA 40-60

minE0303, E0304, E0500, E0203

VE20 160 x 175 x 1 mm 2-4 100v 35mA ✓ 350v 35mA ✓ 5 hr.max.

E0500

DNA RESTRICTION ANALYSISE1007-7 70 x 70 x 5 mm 1 80v ✓ 40mA 80v ✓ 45mA 45 - 60

minE0303, E0304, E0500, E0203

E1007-10 71 x 70 x 5 mm 1 80v ✓ 40mA 80v ✓ 45mA 45 - 60 min

E0303, E0304, E0500, E0203

E1010-10 100 x 100 x 5 mm 1 90v ✓ 50mA 95v ✓ 55mA 45 - 60 min

E0303, E0304, E0500, E0203

E1015-10 100 x 150 x 5 mm 1 90v ✓ 50mA 95v ✓ 55mA 45 - 60 min

E0303, E0304, E0500, E0203

E1015-15 150 x 150 x 5 mm 1 90-150v ✓ 50 -80mA

90-150v ✓ 55 -90mA

60 - 90 min

E0303, E0304, E0500, E0203

E1020-20 200 x 200 x 5 mm 1 100-150v

✓ 50 -80mA

100-150v

✓ 55 -90mA

60 - 90 min

E0303, E0304, E0500, E0203

HIGH THROUGHPUT DNA ELECTROPHORESIS (HORIZONTAL)E1010-9611 100 x 120 x 5 mm 70v ✓ 40 80v ✓ 45mA 30-45

minE0303, E0304, E0500, E0203

WESTERN BLOTTINGE2010-BT 80 x 85 x 1 mm 4 100v 250mA 100v ✓ 400mA 2 hr. E0303,

E0304, E0500, E0203

E2020-TB 160 x 175 x 1 mm 4 50 / 100v

✓ 150 - 250 /1000mA

✓ 50 /100v

✓ 150 - 250 /1000mA

✓ 5-20hr/ 1-5hr

E0203

Wire/Plate Electrode

1600 Wire/PlateElectrode

Wire/PlateElectrode

1600 Wire/PlateElectrode

E2020-SDB (semi-dry)

200 x 200 x 2/5 mm 1 lg 4 sm

75v ✓ 1200mA 75v ✓ 1200mA 15 - 30 min

E0203

*CST=Constant

ELE

CTR

OP

HO

RE

SIS

- P

OW

ER

SU

PP

LIE

S

ELE

CTR

OP

HO

RE

SIS

- P

OW

ER

SU

PP

LIE

S

ENDURO™ Power Supplies

The ENDURO power supplies meet a wide range of applications for DNA, RNA and protein electrophoresis as well as blotting. Designed with safety in mind, they are loaded with features that todays applications demand. 4 models are available to meet your needs. Operating modes depending on model include constant voltage, current or wattage all with automatic crossover.

Operational parameters are easy to set using the membrane keypad and are displayed digitally on the large backlit LCD. The large display is visible from across the laboratory. The Model 250V allows 10 steps per program and the 500V provides 6 steps per program. Four sets of color coded output terminals allow multiple gels to be run simultaneously except in the Mini which allows 2 sets gels at once.In the event of a power failure, the ENDURO units have an automatic recovery feature to maintain the previous settings.

The Mini 300V Power supply has an optional Power Stack. This combination rack and power source allows you to ergonomically stack 3 units only using one plug on the lab bench while providing optimal air flow around power supplies.

CSA Compliant ENDURO™ Power Supplies selection guide

CAT NO. DESCRIPTION

E0303* ENDURO Model 300V

E0203* ENDURO Model 250V

E0500* ENDURO Model 500V

E0304* ENDURO Model Mini 300V

E0304-R ENDURO PowerStack

E0304-BUN* ENDURO mini power supply and powerstack bundle, includes two mini power supplies

*To order 230V units add -230V to the end of the catalog number. 230V units include EU and UK power cords.

SPECIFICATIONS Model 300V Model 250V

Output voltage/range/increments 2-300V/1V 5-250-V/1V

Output current range/increments 4-500mA/1mA 10-3,000mA/10mA

Output power range/increments 90W max/na 1-300W/1W

Timer 1 min – 999 min. or continuous 1 min – 999 min. or continuous

Programmable No Yes, 10 steps/program, 20 program memory

Dimensions 19 x 25 x 8 cm 19 x 25 x 8 cm

Weight 4.8 lbs/2.2 kg 5.5 lbs/2.5 kg

Input voltage 120-230V 120V-230

SPECIFICATIONS Model 500V Model Mini 300V

Output voltage/range/increments 5-500V/1V 10-300V/1V

Output current range/increments 1-800mA/1mA 10-400mA/1mA

Output power range/increments 300W/1W 60W

Timer 1 min – 9999 minutes or continuous 1 min - 99 hr 59 min or continuous

Programmable 6 steps/30 programmable files No

Dimensions 19 x 30.5 x 9.5 cm 15.6 x 21.2 x 8.4 cm

Weight 5.5 lbs/2.5 kg 2.5 lbs/1.141 kg

Input voltage 100V ~240V 100-240V

Productos para Laboratorio

CAT NO. DESCRIPTION

U1001* ENDURO UV Transilluminator with 302 nm wavelength, 115V with US plug

U1002* ENDURO UV Transilluminator with 302 nm and 365 nm wavelengths, 115V with US plug.

*To order 230V units add -230V to the end of the catalog number. 230V units includes EU and UK cords.

ELE

CTR

OP

HO

RE

SIS

- TR

AN

SIL

LUM

INAT

OR

S

MO

LEC

ULA

R B

IOLO

GY

- GE

L D

OC

UM

EN

TATI

ON

ENDURO™ UV Transilluminators

SPECIFICATIONS Model U1001 Model U1002

Outer Dimensions 253 x 340 x 80 mm 253 x 340 x 80 mm

Viewing Dimension 210 x 260 mm 210 x 2260 mm

Wavelength 302 nm 302 nm / 365 nm

UV tubes - 302 nm 8W x 6 8W x 6

UV tubes - 365 nm 8W x 6

Power 100V-240V, 50/60 Hz 100V-240V, 50/60 Hz

Weight 5 kg 5 kg

The ENDURO UV Transilluminator represent a great new imaging product true to the ENDURO name. These UV transilluminators have been designed for rugged use and durability with exceptional performance. The unique hinge design and frame on the UV shield prevents the lid from cracking and hinge damage predominant on most transilluminators in the market. The compact size and quality of image offer a great value. These UV transilluminators come in single or dual wavelength models.

The 100 bp and 1 Kb DNA markers are designed to allow the sizing of a wide range of crisp and precise DNA fragments ranging from 100 bp to 10000 bp. These markers are stable at ambient temperature with 2 years shelf life. They are ready-to-use, formulated with loading buffer and Bromophenol blue for easy loading and tracking on the gel.

The 100 bp DNA ladder contains 11 discrete DNA fragments ranging in size from 100 bp to 3,000 bp, this marker is ideal for the size determination of PCR products.

The 1 Kb DNA ladder contains 13 discrete DNA fragments ranging in size from 300 bp to 10,000 bp. This marker is ideal for the size determination of digested DNA

ENDURO™ MW Markers

CSA Compliant

R1000-100bp R1000-1KB

ENDURO™ GDS Gel Documentation System

The ENDURO GDS Gel Documentation System is a state-of-the-art imaging system providing an incredible combination of performance, value and ease of use. It is a perfect fit with the rapidly expanding ENDURO Electrophoresis and Labnet Molecular Biology product line.

The ENDURO GDS provides exceptional resolution with a 5MP scientific camera, a built in UV transilluminator with a safety shut off switch, and viewing port are unique in this price range. The large field of view (20 cm x 24 cm) allows for large gel imaging, or the imaging of many gels at once. The system was designed to always be in focus, which means no manual manipulation of the lens is required, ever.

Application flexibility is achieved through the UV transilluminators, the optional white light conversion screen, and optional blue conversion screen. The standard filter on the ENDURO GDS is compatible with Ethidium bromide, SYBR® Safe, gel red and SYBR Green to name a few. The optional Clear Gel Tray provides a great tool to make gel handling easier. The tapered end allows safe transfer of gel reducing risk of damaging gel in transport. The GDS is ready to use right out of the box. Just connect a PC and run.

The ENDURO GDS was designed to save images as either jpg. files for publications or tiff. files for quantitative analysis. Labnet offers Total Lab 1D software in either single, multiple user or network licenses. Total Lab 1D provides for the rapid analysis of images and can get you results in a single click of the mouse. The user has the ability to review each stage of the workflow analysis and intervene or edit if required. Combining high levels of automation with final user review allows rapid and accurate quantitative analysis. The user then has full control of the visualization tools and data display - outputting only those data fields that are of importance as well as the images of choice. Reports can easily be generated including quantitative data, gel image and band profile. This is a full featured analytical software package that is the result of decades of software refinement.

PC SPECIFICATIONS Operating System Windows 7Windows 8Windows 10

Minimum hardware requirements1.4 GHz processor speed2GB RAM16 GB Free Hard Disk Space2 USB (camera and printer)

SPECIFICATIONS

Camera 5 Megapixels (2592 x 1944), scientific grade sensor

Lens 8 mm, f1.4 hands-free lens with Smart Capture technology

Cabinet Built in UV transilluminator (302 nm or 365 nm) with:

UV viewing port

Software controls of UV light with automatic shut-off switch

UV safety override switch in door

Maximum field of view 20 x 24 cm

Software Application-driven imaging offers streamlined workflow

Optional: TotalLab 1D for quantitative analysis*

Dimensions 34.6 x 31.1 x 68.6 cm (13.6’ x 12.2’ x 27’)

Weight 21.4 kg (48 lbs)

* Recommended that Microsoft Excel is loaded on the PC to use optionalTotalLab 1D software

CAT NO. DESCRIPTION

R1000-100bp ENDURO Molecular Marker 100bp DNA ladder: 11 fragments, 100-2,000bp, 500 µL

R1000-1Kb ENDURO Molecular Marker 1 Kb DNA ladder: 13 fragments, 300-10,000bp, 500 µL

CAT NO. DESCRIPTION

GDS-1302* ENDURO GDS Imaging System, 302 nm - Universal Voltage

GDS-1365* ENDURO GDS Imaging System, 365 nm - Universal Voltage

*Unit includes US, EU & UK power cords

Productos para Laboratorio

ELE

CTR

OP

HO

RE

SIS

- G

EL

DO

CU

ME

NTA

TIO

N

MO

LEC

ULA

R B

IOLO

GY

- GE

L D

OC

UM

EN

TATI

ON

ENDURO™ GDS Touch Gel Documentation System

The ENDURO GDS Touch is an integrated system for DNA analysis and gel documentation. It is based on the GDS but incorporates an integrated tablet PC with a three position filter wheel with both EPI-Blue and EPI-White light sources standard. The market has shown a growing demand for being able to image DNA at higher wavelengths so as to prevent DNA nicking for downstream applications.

The powerful EPI-Blue light can discriminate bands stained with SYBR®Safe up to 3 levels of magnitude greater than imagers using blue light conversion screens. Just like the ENDURO GDS, there is no need to touch the camera. Installation and operation is simple and acquisition of image can be achieved in 4 touches of the tablet. The ENDURO GDS Touch is ideal for life science research labs who need a flexible system with a small footprint.

SPECIFICATIONS

Camera Resolution 5MPLens Manual F 1.4 Lens (No Focus Required)Field of View 20cm x 24cmStandard Illumination Epi blue and white light, 302 or 365nm

UV transilluminationPull out UV For visualizing and cutting bandsSystem Controls Integrated Touchscreen computerFilter Three position (EtBr included)

Image Capture Software Annotation and email features Yes5 minute auto shut-off of UV YesUV on/off in software YesWhite light on/off in software YesBlue light on/off in software YesDesktop compatible NoTouchscreen/tablet compatible YesCommunications USB . Tablet has wireless and bluetooth optionsFootprint 14” by 12.5” x 25”

CAT NO. DESCRIPTION

GDST-1302* ENDURO GDS Touch Imaging System, 302 nm - Universal Voltage

GDST-1365* ENDURO GDS Touch Imaging System, 365 nm - Universal Voltage

*Unit includes US, EU & UK power cords

® registered trademark of Life Technologies

ENDURO™ GDS Documentation System Accessories

GDS-12018 Clear Gel TrayUse for gel transfer and cutting

GDS-12019 White Light Conversion TrayUse for Coomassie and Silver stain

GDS-12020 Blue Light Conversion Screen (for GDS only)Use for Gel Green, SYBR®Safe stain, and stains that excite at 490 nm

STAIN GUIDE

Fluor/Stain Description Part Number

Ethinium Bromide 302nm UV Standard

Gel Red 302nm UV Standard

SYBR Green 302nm and 488nm Standard

Gel Green Blue Light Conversion Screen GDS-12020

SYBR®Safe Blue Light Conversion Screen GDS-12020

Coomassie Stain White Light Conversion Screen GDS-12019

Silver Stain White Light Conversion Screen GDS-12019

OPTIONAL FILTERS (For GDS Touch only)

GDST-676R Red filter (676 nm)

GDST-572G Green Filter (572 nm)

GDST-497B Blue Filter (497 nm)

® registered trademark of Life Technologies

Productos para Laboratorio

ELE

CTR

OP

HO

RE

SIS

- G

EL

DO

CU

ME

NTA

TIO

N

ENDURO™ TOTAL LAB

Labnet offers TotalLab 1D software in either single, multiple user or network licenses. TotalLab 1D provides for the rapid analysis of images and can get you results in a single click of the mouse. The user has the ability to review each stage of the workflow analysis and intervene or edit if required. Combining high levels of automation with final user review allows rapid and accurate quantitative analysis. The user then has full control of the visualization tools and data display - outputting only those data fields that are of importance as well as the images of choice. Reports can easily be generated including quantitative data, gel image and band profile. This is a full featured analytical software package that is the result of decades of software refinement.

By pressing “Automatic” the first three actionsin the experimental overview have beencompleted

1) Lane Creation2) Backgroung subtraction3) Band detection

*New Features*-New User Interface with simplified menus

-Can save frequently used protocols

-Unique Tutorial mode steps you through analysis

CAT NO. DESCRIPTION

GDS - TL1D-1 TotalLab 1D 1 user license

GDS - TL1D-2 TotalLab 1D 2 user license

GDS - TL1D-3 TotalLab 1D 3 user license

GDS - TL1D-1U TotalLab Quant upgrade 1 user license

GDS - TL1D-3U TotalLab Quant upgrade 3 user license

Productos para Laboratorio

ACEFE, S.A.

Sede CentralCalle Isaac Peral, 5 Pol. Ind. Camí Ral 08850 Gavà, SPAIN Tel: +34 936-362-002 acefesa@acefesa.com

Delegación Levante y Sur Charo Ortín LópezTel.: +34 670-906-508 comercial2@acefesa.com

Delegación Noroeste Francisco Gutiérrez Gómez Tel.: +34 627-449-343 comercial7@acefesa.com