Embed Size (px)
Citation preview
Mohammed Kamal Sediek Aswan, Egypt
Tel. +20 115 537 9666 +20 114 801 4624
E-mail: [email protected]: https://www.linkedin.com/pub/mohamed-kamal/8b/8a1/aa8
Objective
Applications, product or test engineering role in power semiconductors, power management and integrated DC-
DC converters where my five years of extensive product test and validation experiences can add further value to
the company’s capabilities in ensuring high quality, functional and parametric performance.
Work Experience
(May 2011 ~ May 2014) Validation Engineer, Altera Corporation, Power Business Unit / Enpirion – Aswan,
Egypt. Website: www.altera.com
Working at Altera-Enpirion (Power Business Unit) Egypt office in the field of power electronics concentrating in
DC-DC converters. Altera acquired Enpirion Inc. in May 2013. I have developed a wealth of product experience
along with cross-functional and cross-border skills to manage projects effectively.
My responsibilities encompass:
o Operate & validate POL (point-of-load) DC-DC converter semiconductor devices with power levels
ranging from 1W up to 50W operating at very high frequencies up to 15 MHz designed for advanced
digital IC loads.
o Detect, observe and document anomalies in suspicious devices.
o Develop technical and procedural documentation of the of devices’ behavior under test.
o Organize and present characterization data and results to management and the design community.
o Developed strong proficiency with lab equipment (scopes, meters, DVMs, power supplies, function
generators...etc.
o Execute failure analysis.
o Strong familiarity with data sheets, mechanical drawings, assemblies, and BOM structures.
o Design electronic circuits to develop our testing methods for the company’s products: e.g., Slew circuit
power supply, Resistor bank, Slammer circuits, Regulation circuits, Bulk capacitor boards, Jumpers
for hardware replacement parts to decrease the rework.
o Ownership for Enpirion product validation where I am the responsible for defining validation
schedules, resources, and present plan to other departments’ stakeholders.
o Work closely with other teams, locally and in the U.S., to obtain inputs to formulate the best
understanding of different designs and corresponding device behavior.
1
(Jan.2010 ~ May.2011) Lab Engineer, Aswan Power Electronics Research Center (APEARC), South Valley
University, Aswan, Egypt
Website: http://www.svu.edu.eg/apearc/
At APEARC I developed my practical experience with DC-DC converters, their operation, issues, and limitations.
This experience includes:
o Testing power electronics circuits: DC-DC converters.
o Knowledge of PCB layout, PCB tools, and manufacturing methods and limitations of PCB design.
o Proficient hand skills with electronic boards: Soldering, de-soldering, operation, failure analysis,
measurements…etc.
o PCB design using EAGLE software.
o Building/test electronic boards.
(Jul. 2009 ~ Jan. 2010) Electrical Engineer, CairoTech Company.
Worked at CairoTech Company for electrical installations in manufacturing sites (e.g., sugar factories, belting
factories, etc.):
o Build and install electrical panels.
o Install electrical machines.
o Install cable trays.
o Field supervisory.
o Maintain classical control panels.
(May 2014~ Now) Team leader, ECO Electric Solution, Power Business– Aswan, Egypt. Website:
www.ecoelectricsolution.com
Working as a leader local manufacturer and specialist supplier allocated in Upper Egypt (Aswan- Egypt). EES is
a private Egyptian company recently established in 2014 to fulfill the gap in Egyptian Market for "GREEN"
solutions.
My responsibilities encompass:
o Designing and install UPS, Solar Cells, LED Systems.
o Maintenance re-works UPS systems.
o Having a good experience in LED lamps.
o Having a good contact with UPS, Solar, led customers.
Education
(Jun.2009) Bachelor of Science in Electrical Engineering
Department of Electrical Power and Machines, Faculty of Engineering, South Valley University, Aswan, Egypt
Final Graduation project:
Design and develop a distribution system for street lighting. My contributions to the project included:
o Control system design for safe operation of the street lighting system.
o Distribute the different loads according to the available supplies.
o Selecting the types of cables and lamps depending on the type of the street.
o How to augment electric supply to the street lighting by adding PV elements.
Graduation project grade: Excellent.
2
Training
Summer Training:
(2007-2008): Training at the Engineering Lab of Power Machines Company, Kom-Ombo, Egypt.
Removal and installation different types of the electrical machines.
Measuring the machine parameters to diagnose failures.
Classic control of AC motors.
(2006-2007): Training at an Electronics’ maintenance center.
Removal and installation different types of the electronic devices (e.g., TV, radios,
receivers, computer monitors, test equipment, lab equipment…etc.)
Follow the circuits and schematics to discover the fault of the devices.
Validate the electronic parts to decide its ability to work or not.
Replace the damaged parts by hand with high-skill and quality.
(2005-2006): High-Dam Power Generation Company, Aswan, Egypt.
Learn the mechanism of the water flows of the Dam.
Learn electric power production methods from the Dam.
Learn how to design and apply control methods to its production.
Safety techniques and methods in the High-Dam field.
Skills & Self Studies
Technical skills:
Proficient validation and test skills.
Project owner skills.
Drive project to full completion and on-time.
Classic control circuits.
Packages: Lab View, OrCAD, AutoCAD, Eagle, Familiar with PSIM (circuit analysis software).
Software tools: Microsoft office (proficient at Microsoft Excel).
Key Courses: Power Electronics, DISTRUBUTION Systems (Analog and Digital), Electronic Devices and
Circuits, Switching Theory, Electronic PCB maintenance.
Languages & Computer skills:
Arabic (native language).
English (good).
Microsoft Office (Word, Excel & Power Point).
Personal information
Nationality: Egyptian
Military service: Exempted
Date of birth: Dec 6, 1984
Marital status: Married
3
References
Dr. Mohamed Orabi
o APEARC Director and Professor - Faculty of Engineering - Aswan University
o Email: [email protected]
o Phone: +20-100-188-5361
Shimaa Naggar
o Team leader, Validation Engineering, Altera Corp.,
o Email: s [email protected]
o Phone: +20-97-230-0820
More references are available upon request.
Availability
Available Now.
Willing to relocate
4
