R E N K U S - H E I N Z A U D I O O P E R AT I O N S N E T W O R K

MODULAR POINT SOURCE ARRAY LOUDSPEAKER SYSTEMS

Modular Point Source ArrayCF-CFX101LA & CF/CFX15S

HIGHER POWER DENSITY

Up to four CF/CFX101LA cabinets can bearrayed to provide a 90 x 60 degree cover-

age pattern, delivering from 9 dB to 12 dB moreoutput and tighter vertical pattern control than a

conventional single cabinet. Traditional line arrays re-quire two or three times as many cabinets to provide the

same range of coverage.

Page 2

Designed for power, portability and versatility, the CF/CFX101LA from Renkus-Heinz is the ideal solution for today’s small and mid-sized venues, including audi-toria, night clubs, theaters and houses of worship. With the flexibility to be flown,ground-stacked or pole-mounted, the CF/CFX101LA delivers the performanceand pattern control of a line array, with the clarity of a point source system, in acompact, sleek and affordable design that’s equally at home as a portable systemor a permanent installation.

Alone or combined with the CF/CFX15S subwoofer, the CF/CFX101LA can beflown, ground-stacked, or pole-mounted, or used as a center cluster to comple-ment an existing left-right system, making it the perfect solution for a wide rangeof installed or portable sound needs.

INTRODUCING THE CF/CFX Modular Point Source Array

CF/CFX Modular Point Source Array

CF15S

CF101LA

MODULAR POINT SOURCE WAVEGUIDE - TUNED CONIC DIVERTER

When it comes to innovation, once again Renkus-Heinz leads the way. Our new Tuned Conic Diverter carefully ma-nipulates the curvature of the wavefront within the horn so that it's curvature matches the curvature of the array. Assound leaves the compression driver, it's wavefront expansion is at first spherical matching the shape of the bound-

ing side walls. As sound progresses through the horn, it's wavefront is progressively flatenedas it passes through a Tuned Conic Diverter which slows thewavefronts expansion at the center relative to the sides, modifyingit's curvature to match the shape of the cabinet.

With the introduction of the CF/CFX Modular Point Source Array, wehave created a modular point source system, fully conforming to thetrue array principle that is completely free of audible and measurablecomb filtering. What you experience is the clarity of a single cabinet,with the power and coverage to satisfy everyone in the audience.

Tuned Conic Diverter

Page 3

CF/CFX Modular Point Source Array

DESIGNED FOR RUGGED DEPENDABILITY

Heavy-duty birch ply cabinets, ultra-durable coatings and tough, reinforced hardware are designed to withstand the rigors of the road.

QUALITY COMPONENTS

Renkus-Heinz uses only the highest quality, lowest-tolerance components and hardware designed for peak performance. From the precision-tuned crossover network, to rugged dependable hardware, CF/CFX101LA delivers.

SAFE & SIMPLIFIED HARDWARE

Simple, rugged, integral hardware allows for maximum versatility, maxi-mum safety, and fast setup and teardown. CF/CFX101LA hardware hasbeen designed to work either way up so left and right systems can besetup symmetrically without the need for mirror image cabinets.CF/CFX15S matched subwoofers employ the same simple yet sturdyhardware enabling the system to be flown beneath the subwoofer.

MULTI-ANGLE POLE SOCKET

All CF/CFX101LA cabinets come standard with an integral multi-angle polesocket allowing the cabinet to be supported on a standard 35mm loud-speaker stand, or on a sturdy pole attached to the subwoofer. Thisallows the full-range cabinet to be angled straight ahead, up or down asthe situation demands for optimum coverage and performance.

Page 4

CF/CFX Modular Point Source Array

CF/CFX101LA

The CF/CFX101LA Point Array Module has been designedwith your requirements for flexibility in mind. Each cabinetcan be pole mounted, flown from a frame or suspendedusing M10 eyebolts. Suited equally to fixed installation orportable applications each array module offers a consistent90 degree horizontal and tight 15 degree vertical coverage.

Neodymium magnets on the single 10” Low Frequency woofer and dual 1” High Frequency compression driversprovide the ideal balance of power and portability, while the revolutionary performance of the Tuned Conic Diverterwaveguide ensures the smoothest possible transition between cabinets. CF/CFX Point Array is a true point sourcearrayable system offering the benefits of both line and point source arrays.

CF/CFX101LA

• Outstanding Performance

• Dual 1” HF Drivers and High Power 10” Woofer

• Neodymium Magnet Structures

• Great Versatility

• Exclusive Tuned Conic Diverter

• Tight Pattern Control

• Reliable, Easy-To-Use Hardware

• Flexible Input Configurations

• Switchable Biamp / PassiveCFX101LA-8 Connector Plate

HIGH FREQUENCY ARRAY CONTROL

As the CF/CFX101LA can be used in many and variedcombinations simple High Frequency level control switchesare provided on the back of each cabinet. The user can se-lect between a Flat response for a single cabinet, or boostthe HF by +6dB or +9dB depending on how many cabinetsare in the array and how much throw is required.

Page 5

CF/CFX Modular Point Source Array

CF/CFX15S Subwoofer

CF15S and CFX15S-8 subwoofers were developed ascompanion pieces to the CF/CFX series point source arraymodules. They provide the high impact sub bass energyneeded in many venues and also serve as a mounting plat-form for both stacked and flown arrays.

Along with being a dedicated companion subwoofer to theCF/CFX101LA Point Source Array, it can be used to createdirectional cardiod and steerable arrays as well. UsingRHAON, these arrays can then be "steered" to put sub fre-quencies where they are needed, avoiding floor, ceiling, andrear wall reflections for maximum clarity and impact.

CF/CFX15S

• Powerful 15” Subwoofers

• Neodymium Magnet Structures

• Outstanding Versatility

• High Performance, High Power Woofers

• Flexible Input Configurations

• RHAON Ready

Ground Stackwith dual array modules & single subwoofer

Floor Systemwith single array module & subwoofer

Floor Systemwith dual array modules & dual subwoofers

Neodymium Magnet Structure Woofer

Page 6

CF/CFX Modular Point Source Array

Passive, powered or networked, you can choose the system configuration that meets your needs at any time. Whenever you are ready forEthernet audio networking, your CF loudspeakers are too. At the factory or in the field, the CFX passive connector plate can be easily re-placed by one of five PF Series intelligent Class D digital amplifiers.

A Windows GUI empowers RHAON users to connect each Renkus-Heinz powered loudspeaker to a CobraNet network, control 8 parametricEQ filters, up to 340 ms of delay and dynamics processing via onboard DSP, and supervise both the amplifier and drivers.

RENKUS-HEINZ AUDIO OPERATIONS NETWORK

Connect Control SuperviseBeams / Presets

EASE FOCUS

EASE Focus allows users and system designers to quickly and ac-curately predict the response of the array. Simply define the audi-ence areas and you can easily place the array, add or removecabinets and adjust its height, location and angle until you get thedesired results in the simulation.

SELF POWERED & EXTERNALLY POWERED

The CF/CFX101LA Series is available as a passive loudspeaker for use with external amplification, or with Renkus-Heinz’s highly acclaimed PFSeries Intelligent Digital Amplification. The PF Series delivers audiophile-quality performance, ultra-low distortion and unparalleled efficiency in asleek, lightweight design.

Page 7

CF/CFX Modular Point Source Array

SensitivityCF101LA-5, -5R & -52R:

CFX101LA-8:Max SPL:

Dispersion: Freq. Response:

HF Drivers:LF Driver:

Crossover: Enclosure:

PowerCF101LA-5, -5R & -52R:

CFX101LA-8:Controls:

ConnectorsCFX101LA-8:

Finish:

Hardware:

Associated Hardware:

Dimensions:

WeightCF101LA-5 & -5R:

CF101LA-52R: CFX101LA-8:

1.0 V for rated power output 96 dB (1W/1m)126 dB peak90O Horizontal, 15O Vertical 60 Hz to 20 kHzTwo 1” SSDCDXI-1730-8 HF Neodymium drivers; 75 W RMS @ 8 Ohms, 150 W pgm eachCF101LA: 10” Neodymium woofer, model SSL10-8, 250 W RMS @ 8 Ohms, 500 W pgm CFX101LA-8: 10” Neodymium woofer, model SSL10-10, 250 W RMS @ 8 Ohms, 500 W pgm 1.0 kHzMulti-ply hardwood, perforated metal grille

115 V AC or 230 V AC, 50/60 Hz500 W pgm at 8 OhmsArray Balancing

Neutrik 4-pin Speakon style connectors, screw terminals Black or white; custom colors availableWeather resistant treatment availableFour Metric M10 attachment pointsMulti-angle pole socketRHANG101LA FlybarPOLE-CF101 Mounting Pole13" H x 23 3/4" W x 15" D(33 cm x 60.3 cm x 38.1cm)

56 Lbs. (25.4 Kg) net 58 Lbs (26.3 Kg) net54 Lbs (24.5 Kg) net

CF/CFX101LA CF/CFX15S

SensitivityCF15S-5 & -5R:

CFX15S-8 :Max SPL

CF15S-5 & -5R:CFX15S-8:

Freq. Resp:LF Driver:

Enclosure:Finish:

Power CF15S-5 & -5R:

CFX15S-8: Connectors

CF15S-5 & -5R: CFX15S-8:

Hardware:

Dimensions:

WeightCF15S-5 & -5R:

CFX15S-8:

1.0 V for RPO97 dB (1W/1m)

127 dB peak129 dB peak40 Hz to 120 HzCF15S: 15" woofer with Neodymium magnet,model SSL15-20; 400 W RMS @ 4 Ohms, 800 W pgmCFX15S-8: 15" woofer with Neodymium magnet,model SSL15-17; 400 W RMS @ 8 Ohms, 800 W pgm13-ply hardwood, perforated metal grilleBlack or white; custom colors availableWeather resistant treatment available

115 V AC or 230V AC800 W pgm at 8 Ohms

See amplifier specificationsScrew terminals & looping 4-pin Neutrik Speakon style connectors 8-point univ. mtg. hdw. (Metric M10 threads)Threaded pole socket, Integral flying hardwareOptional - heavy duty wheels19" H x 23 1/4” W x 22 1/2" D(48.3 cm x 59 cm x 56.5 cm)

117 Lbs (53.4 Kg) net112 Lbs (51 Kg) net

PF1-500 DIGITAL AMPLIFIER

Power:Freq. Resp:

THD Distortion:Hum & Noise:

Damping:Input:

Sensitivity:CMR:

Controls: Power Connector:

Input:

Power:

500 W RMS @ 4 Ohms+0.0, -.5 dB, 20 Hz to 20 kHz < 0.02% typical <100 dB (A weighted)>10010K Ohm balanced differential 1.0 V for RPO74 dBGain (screwdriver adjustable)IEC Power connectorLooping XLR; female in, male out(pin 1 chassis, pin 2 +, pin 3 -)Switchable, 115 or 230 V AC, 50/60 Hz 5 A @ 120 V, 2.5 A @ 240 V

Idle current: 400 ma @120 V; 200 ma @ 240 V

Max inrush current: 1 A

PF1-500R RHAON EMPOWERED AMPLIFIERS

Inputs:

Digital Format:

Protection:

CobraNet: Dual RJ45 connectors; accept Cat 5 copper cable.

AES/EBU: Phoenix connectors;Analog: Phoenix connectors16, 20 or 24 bit PCM; 48 or 96 kHz samplerate; selectable Network Latency.Soft & Peak limiting, Excursion Control &Thermal Regulation

PF2-500R RHAON EMPOWERED AMPLIFIERS

Power: 6 A @ 120 V, 3 A @ 240 VIdle current: 500 ma @ 120 V; 250 ma @ 240 V. Max inrush current: 1 A

The PF1-500R is identical to the PF1-500 except for the addition of the RHAON NetworkInterface; additional capabilities include:

The PF2-500R is a RHAON empowered 500/200 W RMS bi-amplifier. It is identical to thePF1-500R except for also having a 200 Watt HF amplifier and associated electroniccrossover.

Note: All analog inputs and outputs comply with AES Standard 48-2005 on interconnecting, grounding and shielding.

Renkus-Heinz, Inc., 19201 Cook Street, Foothill Ranch, CA 92610-3501, USA Tel: 949-588-9997 • Fax: 949-588-9514 • sales@renkus-heinz.com

www.renkus-heinz.com RH690 November 2011

CF/CFX Modular Point Source Array

Renkus-Heinz, Inc. Headquarters, Foothill Ranch, California, USA

Working together, there’s no problem we can’t solve, no schedule we can’t meet, no project we can’t take to ahigher level of excellence, from the White House to the Olympic SuperDome, from corner churches to majormetropolitan concert halls. Much as we love technology, our greatest satisfaction comes through helping peoplecommunicate through music, dance, theater, or the power of a new idea brilliantly expressed. When we makethose kinds of connections, there’s nothing more exciting – or more powerful.

Here are some of the unique Renkus-Heinz technologies we use in our loudspeaker systems:

Patented CoEntrant Topology integrates midrange and high frequency drivers into wide-band point sources.

Complex Conic Topology, the first new approach to horn design in decades, has provenits superior performance worldwide.

TRAP (TRue Array Principle) design aligns acoustic centers so loudspeaker clustersproduce coherent output.

Reference Point Array engineering optimizes the entire signal chain from line level tolistener for unprecedented performance.