Modern Production Support - lichthart.de · internal hexagon recesses, asme b18.3 gaging standards 9055 hexagon go no-go gages ... internal hexagon recesses, ansme/ansi b18.3.1m gaging

Modern Production Support Our modern facility, including in-house Vacuum Heat Treating, CNC FormGrinding, CNC Turning, Production CNC Milling, Automated Wire EDM, Conventional EDM, CNC 6 & 5 AxisGrinding, custom press-type work and SPC quality systems allow us to perform for you with speed, reliability andprecision. Our trained customer service and engineering staff, as well as worldwide agents, are available to assistyou with your manufacturing requirements. Our application engineers have the experience to provide you withthe solution to your product inspection or application needs.

GAGE CALIBRATIONS INSPECTION LABORATORY

Calibration ISO17025 To help maintain compliance with applicable standards, we offer gage calibrationservices to re-certify and repair all the gages we manufacture, and many similar types from other manufacturers.All measurements performed are in accordance with ISO Guide 17025 and all reference masters are directlytraceable to N.I.S.T. (National Institute of Standards & Technology). We recommend your gages be routinelyre-certified based on their usage to ensure the gaging members and dial indicators are accurate and reliable.

TABLE OF CONTENTS

INTRODUCTIONTERMS AND CONDITIONSSCREW DRIVE FORM REFERENCES

INTERNAL 6-LOBE (TX) RECESSES GAGING STANDARDS 1180 6-LOBE (TX) PENETRATION GAGES .............................................................................................................................................1181 6-LOBE (TX) GO PENETRATION GAGES ............................................................................................................................................1182 6-LOBE (TX) NO-GO FALLAWAY GAGES ......................................................................................................................................1184 6-LOBE (TX) GO NO-GO GAGES ...................................................................................................................................................1185 6-LOBE (TX) FINAL INSPECTION GAGES .................................................................................................................................................

INTERNAL HEXALOBULAR / 6-LOBE RECESSES, ISO10664, IFI-562 & JIS B1015 GAGING STANDARDS 1190 HEXALOBULAR / 6-LOBE PENETRATION GAGES ......................................................................................................................... 1191 HEXALOBULAR / 6-LOBE GO PENETRATION GAGES ................................................................................................................1192 HEXALOBULAR / 6-LOBENO-GO FALLAWAY GAGES ....................................................................................................................1194 HEXALOBULAR / 6-LOBEGO NO-GO GAGES ..............................................................................................................................1195 HEXALOBULAR / 6-LOBE FINAL INSPECTION GAGES .....................................................................................................................

INTERNAL ENHANCED HEXALOBULAR 6-LOBE EXTRA (TXP) RECESSES, GAGING STANDARDS 1280 EXTRA (TXP) PENETRATION GAGES ............................................................................................................................................1281 EXTRA (TXP) GO PENETRATION GAGES ...................................................................................................................................1282 EXTRA (TXP) NO-GO FALLAWAY GAGES ......................................................................................................................................1284 EXTRA (TXP) GO NO-GO GAGES ...................................................................................................................................................1285 EXTRA (TXP) FINAL INSPECTION GAGES ....................................................................................................................................

INTERNAL EXTRA (TXP) TAMPER RESISTANT RECESSES, GAGING STANDARDS1290 EXTRA (TXP) PENETRATION GAGES ............................................................................................................................................1291 EXTRA (TXP) GO PENETRATION GAGES ...................................................................................................................................1292 EXTRA (TXP) NO-GO FALLAWAY GAGES ......................................................................................................................................1294 EXTRA (TXP) GO NO-GO GAGES ...................................................................................................................................................1295 EXTRA (TXP) FINAL INSPECTION GAGES ....................................................................................................................................

EXTERNAL 6-LOBE (TX) RECESSES, TXQ-803, IFI-562 & DIN 34801 GAGING STANDARDS 2185 6-LOBE (TX) RECEIVING INSPECTION GO GAGES ..................................................................................................................2190 6-LOBE (TX) PRODUCTION GO NO-GO GAGES ..........................................................................................................................2193 6-LOBE (TX) EXTERNAL INSPECION GAGES ..............................................................................................................................2196 6-LOBE (TX) GO NO-GO DRIVER BIT & KEY GAGES ................................................................................................................2197 6-LOBE (TX) GO NO-GO DRIVER BIT & KEY GAGES .................................................................................................................

EXTERNAL EXTRA PLUS (TXP) RECESSES, NIQ-801.1, NIQ-813, NIQ-613 & FORD WB900 GAGING STANDARDS 2285 EXTRA (TXP) FINAL INSPECTION GO GAGES .............................................................................................................................2290 EXTRA (TXP) PRODUCTION GO NO-GO GAGES ........................................................................................................................2293 EXTRA (TXP) EXTERNAL GO, NO-GO, FALLAWAY INSPECTION GAGES ..................................................................................2297 EXTRA (TXP) GO NO-GO DRIVER BIT & KEY GAGES ...............................................................................................................2298 EXTRA (TXP) TAMPER RESISTANT GO NO-GO DRIVER BIT & KEY GAGES .........................................................................

8900 GAGE STORAGE BOXES ..............................................................................................................................................................

INTERNAL PENETRATION RECESSES, ASME B18.6.4/.5M, ISO, JIS, DIN, BS, & GB GAGING STANDARDS8915 SCREW SLOT PENETRATION GAGES .....................................................................................................................................................8916 TOTAL RECESS DEPTH PENETRATION GAGES .................................................................................................................................

INTERNAL TYPE I PHILLIPS RECESSES, ASME B18.6.4/.5M, ISO, JIS, DIN, BS, & GB GAGING STANDARDS9000 TYPE I PHILLIPS PENETRATION GAGES .................................................................................................................................................9001 TYPE I PHILLIPS PLUG GAGES ..............................................................................................................................................................9002 TYPE I PHILLIPS GO NO-GO RING GAGES .................................................................................................................................9003 TYPE I PHILLIPS TEST BLOCK GAGES .......................................................................................................................................

INTERNAL TYPE IA, POzI DRIVE RECESSES, ASME B18.6.4/.5M, ISO, JIS, DIN, BS, & GB GAGING STANDARDS9006 TYPE IA Pz DRIVE PENETRATION GAGES ...............................................................................................................................................9007 TYPE IA Pz DRIVE PLUG GAGES ..............................................................................................................................................................9008 TYPE IA Pz DRIVE GO NO-GO RING GAGES .................................................................................................................................9009 TYPE IA Pz DRIVE TEST BLOCK GAGES .......................................................................................................................................

INTERNAL TYPE II DRIVE RECESSES, ASME B18.6.4/.5M, GAGING STANDARDS9011 TYPE II DRIVE PENETRATION GAGES .......................................................................................................................................9012 TYPE II DRIVE PLUG GAGES .......................................................................................................................................................9013 TYPE II DRIVE GO NO-GO RING GAGES ...................................................................................................................................9014 TYPE II DRIVE TEST BLOCK GAGES ..........................................................................................................................................

PAGES

1

2

3

4

5

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

TABLE OF CONTENTS

INTERNAL TYPE III SQUARE DRIVE RECESSES, ASME B18.6.3/.5M GAGING STANDARDS9016 TYPE III SQUARE DRIVE PENETRATION GAGES ...............................................................................................................................9017 TYPE III SQUARE DRIVE PLUG GAGES ..................................................................................................................................................9018 TYPE III SQUARE DRIVE GO NO-GO RING GAGES ............................................................................................................................9019 TYPE III SQUARE DRIVE TEST BLOCK GAGES ..................................................................................................................................

INTERNAL HEXAGON RECESSES, ASME B18.3 GAGING STANDARDS9025 HEXAGON PENETRATION GAGES ...............................................................................................................................................

INTERNAL SPLINE RECESSES, ASME B18.3 GAGING STANDARDS9030 SPLINE PENETRATION GAGES ....................................................................................................................................................INTERNAL METRIC SPLINE RECESSES, ANSME/ANSI B18.3.1.6M GAGING STANDARDS9035 METRIC SPLINE PENETRATION GAGES ......................................................................................................................................

INTERNAL METRIC HEXAGON RECESSES, ANSME/ANSI B18.3.1.6M GAGING STANDARDS9040 METRIC HEXAGON PENETRATION GAGES ...............................................................................................................................

INTERNAL OFFSET CRUCIFORM, RECESSES, ACR RIBBED, NAS0025 & ISO14277 & ISO14278 GAGING STANDARDS9043 OFFSET CRUCIFORM GO / NO-GO GAGES ................................................................................................................................9044 METRIC OFFSET CRUCIFORM GO / NO-GO GAGES ..................................................................................................................

INTERNAL OFFSET CRUCIFORM, RECESSES, ACR RIBBED, NAS0025 & ISO14277 & ISO14278 GAGING STANDARDS9045 OFFSET CRUCIFORM GO / NOT GO PENETRATION GAGES ..................................................................................................9046 METRIC OFFSET CRUCIFORM GO / NOT GO PENETRATION GAGES ................................................................................................

INTERNAL TRI-SLOT, RECESSES, ACR RIBBED, NAS4000 GAGING STANDARDS9045 TRI-SLOT PENETRATION GAGES ...............................................................................................................................................9046 TRI-SLOT GO NO-GO GAGES ......................................................................................................................................................

INTERNAL 12-POINT RECESSES, DIN34824 & VW01043 GAGING STANDARDS9052 12-POINT PENETRATION GAGES ...............................................................................................................................................9053 12-POINT GO NO-GO GAGES ......................................................................................................................................................

INTERNAL HEXAGON RECESSES, ASME B18.3 GAGING STANDARDS9055 HEXAGON GO NO-GO GAGES ....................................................................................................................................................INTERNAL SPLINE RECESSES, ASME B18.3 GAGING STANDARDS9060 SPLINE GO NO-GO GAGES ............................................................................................................................................................

INTERNAL METRIC SPLINE RECESSES, ANSME/ANSI B18.3.1.6M GAGING STANDARDS9065 METRIC SPLINE GO NO-GO GAGES ....................................................................................................................................................INTERNAL HEXAGON RECESSES, ANSME/ANSI B18.3.1M GAGING STANDARDS9075 METRIC HEXAGON GO NO-GO GAGES ...................................................................................................................................................INTERNAL HEXAGON RECESSES, ISO 23429 GAGING STANDARDS9076 METRIC HEXAGON GO NO-GO GAGES ...................................................................................................................................................

INTERNAL SQUARE DRIVE RECESSES, ROBERTSON’S DRIVE GAGING STANDARDS9089 SQUARE DRIVE PENETRATION GAGES ....................................................................................................................................9090 SQUARE DRIVE PLUG GAGES ....................................................................................................................................................9091 SQUARE DRIVE GO NO-GO RING GAGES ..................................................................................................................................9092 SQUARE DRIVE TEST BLOCK GAGES ........................................................................................................................................

INTERNAL QUADREX DRIVE RECESSES, ISOTEC QX-001,002 GAGING STANDARDS9095 SQUARE DRIVE PENETRATION GAGES ....................................................................................................................................9096 SQUARE DRIVE PLUG GAGES ....................................................................................................................................................

9100 PENETRATION GAGING FIXTURE ...............................................................................................................................................9200 WOBBLE GAGE & GAGING FIXTURE ................................................................................................................................................9300 TORSIONAL TESTING FIXTURE ...................................................................................................................................................9400 NAS TORSIONAL TESTING FIXTURE ................................................................................................................................................9450 PROTRUSIONAL HEIGHT FIXTURES ................................................................................................................................................9455 PRECISION PROTRUSION HEIGHT FIXTURE ................................................................................................................................9475 DIGITAL LENGTH GAGE FIXTURES ............................................................................................................................................9500 DIGITAL RUNOUT RECESS CHECKER GAGES .......................................................................................................................................9600 DIGITAL DRILL POINT WEB THICKNESS GAGE .....................................................................................................................................9700 DIGITAL TRI-LOBE TAPTITE GAGE .............................................................................................................................................9800 DIGITAL STRAIGHTNESS GAGE FIXTURES .........................................................................................................................................12000 DIGITAL EXTERNAL THREAD GAGE SYSTEM ........................................................................................................................ 2000020000 DIGITAL INTERNERNAL THREAD GAGE SYSTEM .............................................................................................................................

PAGES

25

26

27

28

29

30

31

32

33

34

35

36

37

38

394041424344454647

484950

INTRODUCTION

MISSION STATEMENT: To be a world class contract supplier of tools and gages to the Aerospace, Automotive, Appliance, Defense, Electronic,Machine Tool, Medical Devices, Munition, and other industries with innovative designs, and to always be attentive to the needs of ourcustomers.

COMPANY: Universal Punch Corp. is an ISO 9001:2008 registered company and has been a leader in the tooling and gaging industry for fourdecades. As part of our continuing commitment to provide precision and excellence in all of our products, we maintain a state of the art 65,000sq.ft. facility. Our spacious new plant is equipped with increased machining capacity, expanded heat treating department and a calibration andinspection laboratory. Our laboratory ensures that all products sold conform to ISO17025 standards. All measuring equipment and gagingmasters are directly traceable to N.I.S.T.

SERVICES: Universal Punch Corp. is a high precision tool and gage manufacturer. We use high tech applications to make a wide range ofproducts to meet today’s increased demands for superior performing tools and high precision gaging. Our modern vacuum heat treatingfacility provides the control necessary to make tools with the highest structural integrity, capable of withstanding the severest headingapplication of warm or cold forming. In addition, complete inventories of standard tooling are available for immediate delivery in a variety ofmaterials, finishes, and coatings.

FASTENER DRIVES: We offer products for many popular drive systems, such as Phillips Type I, Pozi 1A Type II, Square Type III, 6-Lobe (Torx),6-Lobe Extra (TorxPlus), Supadrive, Six & Eight-Point Drives, 12-Point VW, ISO Hexalobular, Hexagon, Double Hex, Penta Drive, Square Drive,Indented Hexagon, Combinations, Splines, Tamper Proof, NAS Tri Slot, NAS Cruciform, Star type forms, and custom forms.

GAGING: Go/No-Go, Penetration, Final Inspection, Plug Gages, Concentricity Gages, Thickness, Driver Bit, Recess, Wobble, Screw Recess,Screw Testing Fixtures, Runout, Protrusion Height, Variable Reading Thread Gages, Special Modular Gaging Fixtures, SPC Data CollectionSystems, and Gage Calibration Service.

SPECIALTIES: We have full time engineering staff using AutoCAD and SolidWorks CAD/CAM software for drawing and CNC machineprogramming. Our manufacturing processes consist of a large number of special five and six axis CNC Form Ginders, CNC Mill/TurningLathes, Mills, Swiss Screw Machines, Wire EDM, and conventional EDM to ensure quality and reliability of products. We have a full in-houselaboratory, temperature and humidity controlled for customer calibration of gages, which includes SIP 305, Video Microscope, and Fiber OpticsCMM.

INTERNATIONAL SERVICES: Universal Punch Corp. is dedicated to the global marketplace. Agents or distributors located in the United States,Mexico, Canada, South America, England, France, Spain, Germany, Italy, Switzerland, Turkey, India, South Korea, Singapore, China, Taiwan,Japan, and Australia are ready to assist you.

ACHIEVEMENTS: ISO9001/2008 by Underwriters Laboratories UL DQS Inc. with quality emphasis on compliance to ISO 17025 Guide 25; thedevelopment of the two-piece hex punch system and later the 6-Lobe/Hexalobular system; special Medical Driver Systems; the patentedConcentricity Gage and various fastener gages are just some of our achievements.

WEBSITES: www.universalpunch.com; www.concentricitygage.com; www.six-lobe.com; www.hexalobular.com; www.wobble-broaches.com

EMAIL: [email protected] PHONE: 714-556-4488 FAX: 714-556-6314

Servicing Your Tooling And Gaging Requirements Into The Twenty First Century.

TERMS AND CONDITIONS

TERMS: NET 30 DAYS ON APPROVED CREDIT, F.O.B. SANTA ANA, CALIFORNIA. ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.

DELIVERY: IS ALWAYS QUOTED AFTER RECEIPT OF ORDER. STOCK ORDERS WILL PROCESS IN 2 BUSINESS DAYS UNLESS SPECIFIEDNEXT DAY RUSH SERVICE.

ORDERING & BILLING:MINIMUM BILLING - $100.00MINIMUM ORDER FROM STOCK - $100.00 MINIMUM MANUFACTURED ORDER - $200.00

SHIPPING: UNLESS OTHERWISE INSTRUCTED SHIPPING WILL BE DONE BY THE LEAST EXPENSIVE WAY. WE CANNOT ASSUME CHARGESOR RESPONSIBILITY DUE TO TRANSPORTATION DIFFICULTIES. DUE TO THE NATURE OF OUR BUSINESS, WE RESERVE THE RIGHT TOSHIP AND CHARGE THE CUSTOMER FOR 10% OVER OR UNDER SPECIFIED QUANTITIES.

QUOTATIONS: ARE VALID FOR 30 DAYS ONLY, UNLESS SPECIAL ARRANGEMENTS ARE MADE. WE RESERVE THE RIGHT TO ADVISE THECUSTOMER OF ANY CHANGE IN PRICE UPON RECEIPT OF ORDER, IF YOU HAVE BEEN QUOTED INCORRECTLY.

CANCELLATIONS: WILL BE SUBJECT TO A MINIMUM CHARGE OF $75.00 PLUS ANY APPLICABLE MATERIAL AND LABOR CHARGES FORWORK IN PROGRESS.

RETURNS: POSITIVELY NO PRODUCT OR GAGES MAY BE RETURNED WITHOUT FACTORY AUTHORIZATION (RMA) AND REQUESTS FORSUCH MUST BE MADE WITHIN 10 BUSINESS DAYS OF RECEIPT OF MERCHANDISE. GAGES ACCEPTED UNDER THESE CONDITIONS SHALLBE SUBJECT TO THE RIGHT OF REPAIR OR REPLACEMENT.

MERCHANDISE RETURNS: ALL RETURNED STOCK ITEMS WILL BE SUBJECT TO A 25% RESTOCKING CHARGE.

EXCLUSIONS AND LIMITATIONS: DUE TO THE SEVERITY AND CONDITIONS SURROUNDING GAGE USAGE, IT IS A FIRM POLICY OF THISCOMPANY NOT TO GUARANTEE PERFORMANCE OR RELIABILITY, BUT ONLY CONFORMANCE TO PHYSICAL SPECIFICATIONS ANDWORKMANSHIP. ALL GAGES WILL REQUIRE MAINTENANCE, TESTING AND CALIBRATION UNDER NORMAL USE.

GAGE LIMITED WARRANTY: THIS LIMITED WARRANTY APPLIES ONLY TO GAGES AND GAGE PARTS MANUFACTURED BY OR FORUNIVERSAL PUNCH CORP.: THAT WITHIN TWELVE (12) MONTHS FROM DATE OF SHIPMENT, WE WILL REPAIR OR REPLACE, AT OUROPTION, FREE OF CHARGE, ANY PART OR PARTS WHICH UPON EXAMINATION WE FIND DEFECTIVE IN WORKMANSHIP OR MATERIAL. THELIMITED WARRANTY DOES NOT APPLY TO ANY GAGES OR GAGE PARTS THAT HAVE BEEN DISASSEMBLED OR MODIFIED IN ANY WAY BYTHE USER. UNIVERSAL PUNCH CORP. IS NOT RESPONSIBLE FOR DAMAGE ARISING FROM FAILURE TO FOLLOW INSTRUCTIONSRELATING TO THE PRODUCT’S USE. THIS WARRANTY DOES NOT APPLY: (A) TO DAMAGE CAUSED BY NON-UNIVERSAL PUNCH CORP.PRODUCTS; (B) TO DAMAGE CAUSED BY ACCIDENT, ABUSE, MISUSE, FLOOD, FIRE, OR OTHER EXTERNAL CAUSES; (C) TO DAMAGECAUSED BY OPERATING THE PRODUCT OUTSIDE THE PERMITTED USES DESCRIBED BY UNIVERSAL PUNCH CORP.; (D) TO DAMAGECAUSED BY SERVICE PERFORMED BY ANYONE OTHER THAN UNIVERSAL PUNCH CORP. TECHNICIANS; (E) TO A GAGE OR GAGE PARTTHAT HAS BEEN MODIFIED TO SIGNIFICANTLY ALTER FUNCTIONALITY OR CAPABILITY WITHOUT THE WRITTEN PERMISSION OFUNIVERSAL PUNCH CORP.; OR (F) IF ANY SERIAL NUMBER HAS BEEN REMOVED OR DEFACED.

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERWARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, STATUTORY, EXPRESS OR IMPLIED. AS PERMITTED BYAPPLICABLE LAW, UNIVERSAL PUNCH CORP. SPECIFICALLY DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES,INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIESAGAINST HIDDEN OR LATENT DEFECTS, AND IN NO EVENT WILL UNIVERSAL PUNCH CORP. BE LIABLE FOR ANY SPECIAL, INDIRECT ORCOSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO, LOST PROFITS OR OTHER DAMAGES FROM LOSS OF PRODUCTIONCAUSED BY DEFECTIVE PRODUCT, OR BY UNSATISFACTORY PERFORMANCE OF THE PRODUCT. NO UNIVERSAL PUNCH AGENT ORDISTRIBUTOR IS AUTHORIzED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. THIS LIMITED WARRANTYIS GOVERNED BY AND CONSTRUED UNDER THE LAWS OF THE COUNTRY AND STATE IN WHICH THE PRODUCT WAS MANUFACTURED.

OBTAINING WARRANTY SERVICE: WARRANTY SERVICE CAN ONLY BE OBTAINED DIRECTLY FROM THE MANUFACTURER, UNIVERSALPUNCH CORP. AND PRIOR MANUFACTURER APPROVAL MUST BE OBTAINED. WARRANTY SERVICE APPLIES TO PARTS THAT ARETENDERED OR PRESENTED FOR SERVICE DURING THE WARRANTY PERIOD. SERVICE OPTIONS, PARTS AVAILABILITY AND RESPONSETIMES MAY VARY ACCORDING TO THE PRODUCT BEING RETURNED.

SCREW DRIVE FORM REFERENCES

GAGE INSPECTION USE

Penetration Gage Inspection There are three types of Penetration Gages available.

Penetration Gage: This gage has a moving element and an indicator. Generally used for inspection of finished products,the Penetration Gage is used to check acceptance of a drive form by representing the minimum form size allowable after plating. In addition,this gage measures form depth. If the Penetration Gage does not enter the form then the form has likely been coated past allowable limitsduring plating. For acceptance of the part, the Penetration Gage should fully enter the screw form and have a depth compliant to thespecification.

GO Production Gage: This gage has a moving element and anindicator. Generally used for receiving and manufacturing inspection, theGO Production Gage is used to check acceptance of a drive form byrepresenting the minimum form size allowable. In addition, this gagemeasures form depth. If the GO Production Gage does not enter the formthen the form is either undersized, or the form is irregular in some way.For acceptance of the part, the GO Production Gage should fully enterthe screw form and have a depth compliant to the specification.

NO-GO Fallaway Gage: This gage has a moving element andan indicator. Generally used for receiving and manufacturing inspection, the NO-GO Fallaway Gage is used to check acceptance of a drive formby representing the maximum form size allowable. In addition, this gage measures form fallaway depth. The NO-GO Fallaway Gage can at bestenter into the form just slightly, but may not at all. Should it enter, it shall not exceed the specified fallaway depth.

Plug Gage InspectionsThere are two types of Plug Gages available.

GO / NO-GO Plug Gage: This gage is double ended, with oneend being the GO and the other the NO-GO. This Gage is generally usedfor receiving and manufacturing inspection. The “GO” end is used tocheck acceptance of a drive form by representing the minimum form sizeallowable. If the “GO” end does not enter the form then the form is eitherundersized, or the form is irregular in some way. For acceptance of thepart, the GO Plug Gage should fully enter the screw form to its completedepth. The “NO-GO” end is used to check acceptance of a drive form by representing the maximum form size allowable. The “NO-GO” endcan at best enter into the form just slightly, but may not at all. Should it enter, it shall not exceed the specified fallaway depth. To properly gagefallaway depth, a NO-GO Fallaway Gage is required.

Final Plug Gage: This gage is single ended. Generally used forinspection of finished products, the Final Plug Gage is used to checkacceptance of a drive form by representing the minimum form sizeallowable after plating. If the Final Plug Gage does not enter the formthen the form has likely been coated past allowable limits during plating.For acceptance of the part, the Final Plug Gage should fully enter thescrew form to its complete depth.

#1180 6-LOBE (TX) PENETRATION GAGE TXQ-809

DRIVESIzE

T4T5T6T7T8T9T10T15T20T25T27T30T40T45T50T55T60T70T80T90T100

PART NUMBER

1180-041180-051180-061180-071180-081180-091180-101180-151180-201180-251180-271180-301180-401180-451180-501180-551180-601180-701180-801180-901180-100

REFERENCENUMBER

4-TXI-809 5-TXI-809 6-TXI-809 7-TXI-809 8-TXI-809 9-TXI-809

10-TXI-809 15-TXI-809 20-TXI-809 25-TXI-809 27-TXI-809 30-TXI-809 40-TXI-809 45-TXI-809 50-TXI-809 55-TXI-809 60-TXI-809 70-TXI-809 80-TXI-809 90-TXI-809

100-TXI-809

FOR INTERNAL (TX) RECESS HEAD SCREWS REFERENCES: TXF-809, TMF-809

When Ordering Specify Inch Or Metric Dial Indicator, SPC-Compatible With Digital Indicators. Tamper-Proof Style Available (Sizes #6 Thru #45)All Gage Probes Are Heat Treated, Thermally Stabilized And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long FormCalibration Certificates Provide Traceability To (N.I.S.T) National Institute Of Standards & Technology.

REFERENCENUMBER

4-TXI-804 5-TXI-804 6-TXI-804 7-TXI-804 8-TXI-804 9-TXI-804

10-TXI-804 15-TXI-804 20-TXI-804 25-TXI-804 27-TXI-804 30-TXI-804 40-TXI-804 45-TXI-804 50-TXI-804 55-TXI-804 60-TXI-804 70-TXI-804 80-TXI-804 90-TXI-804

100-TXI-804

#1181 6-LOBE (TX) GO PENETRATION GAGE TXQ-804

DRIVESIzE


PART NUMBER

1181-041181-051181-061181-071181-081181-091181-101181-151181-201181-251181-271181-301181-401181-451181-501181-551181-601181-701181-801181-901181-100

FOR INTERNAL (TX) RECESS HEAD SCREWS STANDARD REFERENCES TMF-804, TXQ-804


1

FOR INTERNAL (TX) RECESS HEAD SCREWS REFERENCES: TXF-812, TMF-810, TMQ-812, TXQ-812

#1182 6-LOBE (TX) NO-GO FALLAWAY GAGE TXQ-812

DRIVESIzE


PART NUMBER

1182-041182-051182-061182-071182-081182-091182-101182-151182-201182-251182-271182-301182-401182-451182-501182-551182-601182-701182-801182-901182-100

REFERENCENUMBER

P6TX4/905P6TX5/905P6TX6/905P6TX7/905P6TX8/905P6TX9/905P6TX10/905P6TX15/905P6TX20/905P6TX25/905P6TX27/905P6TX30/905P6TX40/905P6TX45/905P6TX50/905P6TX55/905P6TX60/905P6TX70/905P6TX80/905P6TX90/905P6TX100/905


DRIVESIzE


PART NUMBER

1184-041184-051184-061184-071184-081184-091184-101184-151184-201184-251184-271184-301184-401184-451184-501184-551184-601184-701184-801184-901184-100

#1184 6-LOBE (TX) GO NO-GO GAGE TXQ-804

FOR INTERNAL (TX) RECESS HEAD SCREWS STANDARD REFERENCES TMF-804, TXQ-804

When Ordering Specify Tamper-Proof Style (Sizes #6 Thru #45). Gage Probes Are Heat Treated, Thermally Stabilized, And Surface Treated ToProvide Additional Wear To Maximize Gage Life. Long Form Calibration Certificates Provide Dimensions And Tolerances To SpecifiedStandards And Are Traceable To (N.I.S.T) National Institute Of Standards & Technology.

REFERENCENUMBER

4-TXI-9005-TXI-9006-TXI-9007-TXI-9008-TXI-9009-TXI-900

10-TXI-90015-TXI-90020-TXI-90025-TXI-90027-TXI-90030-TXI-90040-TXI-90045-TXI-90050-TXI-90055-TXI-90060-TXI-90070-TXI-90080-TXI-90090-TXI-900

100-TXI-900

2

PART NUMBER

1185-041185-051185-061185-071185-081185-091185-101185-151185-201185-251185-271185-301185-401185-451185-501185-551185-601185-701185-801185-901185-100

DRIVESIzE


#1185 6-LOBE (TX) FINAL INSPECTION GAGE TXQ-811

REFERENCENUMBER

4-TXI-9015-TXI-9016-TXI-9017-TXI-9018-TXI-9019-TXI-901

10-TXI-90115-TXI-90120-TXI-90125-TXI-90127-TXI-90130-TXI-90140-TXI-90145-TXI-90150-TXI-90155-TXI-90160-TXI-90170-TXI-90180-TXI-90190-TXI-901

100-TXI-901

When Ordering Specify Tamper-Proof Style (Sizes #6 Thru #45). Gage Probes Are Heat Treated, Thermally Stabilized, And Surface Treated ToProvide Additional Wear To Maximize Gage Life. Long Form Calibration Certifcates Provide Dimensions And Tolerances To SpecifiedStandards And Are Traceable To (N.I.S.T) National Institute Of Standards & Technology.

#1190 HEXALOBULAR PENETRATION GAGE ISO10664 / IFI-562 /JIS B1015

DRIVESIzE

567891015202527304045505560708090100

PART NUMBER

1190-051190-061190-071190-081190-091190-101190-151190-201190-251190-271190-301190-401190-451190-501190-551190-601190-701190-801190-901190-100

FOR INTERNAL ISO HEXALOBULAR RECESS HEAD SCREWS REFERENCES: ISO10664:2014(E) IFI 562 & JIS B1015:2008

REFERENCENUMBER

ISO10664:2014(E)-------------------

When Ordering Specify Inch Or Metric Dial Indicator, SPC-Compatible With Digital Indicators. All Gage Probes Are Heat Treated, ThermallyStabilized And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long Form Calibration Certificates Provide Traceability To(N.I.S.T) National Institute Of Standards & Technology.

FOR INTERNAL (TX) RECESS HEAD SCREWS REFERENCES: TMQ-811, TMF-811, TXF-811, TXQ-811

3

#1191 HEXALOBULAR GO PENETRATION GAGE ISO10664 / IFI-562 /JIS B1015

DRIVESIzE

567891015202527304045505560708090100

PART NUMBER

1191-051191-061191-071191-081191-091191-101191-151191-201191-251191-271191-301191-401191-451191-501191-551191-601191-701191-801191-901191-100

FOR INTERNAL ISO HEXALOBULAR RECESS HEAD SCREWS REFERENCES: ISO10664:2014(E) IFI562 & JIS B1015:2008

REFERENCENUMBER

ISO10664:2014(E)-------------------


#1192 HEXALOBULAR NO-GO FALLAWAY GAGE ISO10664 / IFI-562 /JIS B1015

DRIVESIzE

567891015202527304045505560708090100

PART NUMBER

1192-051192-061192-071192-081192-091192-101192-151192-201192-251192-271192-301192-401192-451192-501192-551192-601192-701192-801192-901192-100


REFERENCENUMBER

ISO10664:2014(E)-------------------


4

#1195 HEXALOBULAR CYLINDRICAL NO-GO GAGE ISO10664 / IFI-562

DRIVESIzE

567891015202527304045505560708090100

PART NUMBER

1195-051195-061195-071195-081195-091195-101195-151195-201195-251195-271195-301195-401195-451195-501195-551195-601195-701195-801195-901195-100

FOR INTERNAL ISO HEXALOBULAR RECESS HEAD SCREWS REFERENCES: ISO10664: 2014(E) IFI 562 & JIS B1015:2008


REFERENCENUMBER

ISO10664:2014(E)-------------------

DRIVESIzE

567891015202527304045505560708090100

PART NUMBER

1194-051194-061194-071194-081194-091194-101194-151194-201194-251194-271194-301194-401194-451194-501194-551194-601194-701194-801194-901194-100

#1194 HEXALOBULAR GO NO-GO GAGE ISO10664 / IFI-562 /JIS B1015


REFERENCENUMBER

ISO10664:2014(E)-------------------

Universal’s Gage Probes Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. LongForm Calibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) National Institute OfStandards & Technology.

5

ENHANCED HEXALOBULAR / 6-LOBE EXTRA (TXP) • Worldwide Sales & SupportGlobal Industries currently using the ISO Hexalobular and IFI 6-LOBE(TX) now have access to a NEW improved drive called EnhancedHexalobular, Extra. This elliptical drive has many new improvementsfor multiple applications including: NAS Aerospace, Appliance,Automotive, Construction Electronics, Military, Nuclear, Medical andothers. Universal Punch Corp. has become a preferred supplier toworldwide manufacturing markets through superior quality, technicalsupport and cost effective distribution of stocked inventories of stan-dard tools and gages.

• Manufacturing Standards & DocumentsAround the world, several international and governmental committees(ISO, EN, DIN, JIS, IFI, NAS, ANSI) have published fastenermanufacturing standards including the gaging documents that providetechnical data support (“Know-How”) for most common designs.These controlled documents are consistently updated and thenecessary manufacturing technology can be obtained from numerouson-line agencies or document stores with current revisions, whichprovides worldwide document standardization.

• Technical Advantages & Economic Benefits

Enhanced Hexalobular, 6-Lobe Extra / (TXP) all provide benefits thatovercome the inherent limitations of Phillips, Pozi, Hexagon, Square,12-Point, Slotted and other drive systems. The result is improved drivetool life and reduced overall costs.

• Improved Driver Bit Life • Improved Driver Bit Torsional Strength • Superior Fit Between Drive Tool & Fastener • High Torque Transfer Capability • Reduced Camout • Reduced Tool Slippage • Reduced Worker Fatigue • Improved Quality With Economic Benefits

• Gage Re-CertificationTo help maintain compliance with all standards for both internal sizes(T5–T100, 5IP–100IP) and external sizes (E4–E44, 4EP–44EP) we offergage calibration services to re-certify and repair any parts on ourEnhanced Hexalobular, 6-Lobe Extra (TXP) Gages. Our state-of-the-artinspection laboratory services conform to ISO 17025 and all referencemasters are directly traceable to N.I.S.T., which ensures the gagingstandards used by manufacturers remains consistent and withinestablished specifications. We recommend your gages be routinelyre-certified based on their usage to ensure the gage members andindicators remain accurate and reliable.`

• Gage Types & ClassificationManufacturing & Receiving Inspection • Penetration • FallawayPenetration • Go / No-Go Internal • Go Final • Tamper Resistant • No-GoFallaway • Final Inspection External • Go / No-Go External • Driver Bit& Key / Screwdriver • Tapered Bit Go • Socket Driver Go • PlatingThickness Go / No-Go

6

#1280 EXTRA (TXP) PENETRATION GAGE CIQ-811

DRIVESIzE

5IP6IP7IP8IP9IP

10IP15IP20IP25IP27IP30IP40IP45IP50IP55IP60IP70IP80IP90IP

100IP

PART NUMBER

1280-051280-061280-071280-081280-091280-101280-151280-201280-251280-271280-301280-401280-451280-501280-551280-601280-701280-801280-901280-100

REFERENCENUMBER

5-PLI-8016-PLI-8017-PLI-8018-PLI-8019-PLI-801

10-PLI-80115-PLI-80120-PLI-80125-PLI-80127-PLI-80130-PLI-80140-PLI-80145-PLI-80150-PLI-80155-PLI-80160-PLI-80170-PLI-80180-PLI-80190-PLI-801

100-PLI-801

REFERENCENUMBER



100-PLI-800

#1281 EXTRA (TXP) GO PENETRATION GAGE CIQ-804.1.2

DRIVESIzE

5IP6IP7IP8IP9IP


100IP

PART NUMBER

1281-051281-061281-071281-081281-091281-101281-151281-201281-251281-271281-301281-401281-451281-501281-551281-601281-701281-801281-901281-100

FOR INTERNAL EXTRA (TXP) RECESS HEAD SCREWS REFERENCES: CIQ-804.1, & CIQ-804.2

FOR INTERNAL EXTRA (TXP) RECESS HEAD SCREWS REFERENCES: NIQ-811 & CIQ-811



7

REFERENCENUMBER



100-PLI-805

#1282 EXTRA (TXP) NO-GO FALLAWAY GAGE CIQ-812

DRIVESIzE

5IP6IP7IP8IP9IP


100IP

PART NUMBER

1282-051282-061282-071282-081282-091282-101282-151282-201282-251282-271282-301282-401282-451282-501282-551282-601282-701282-801282-901282-100



PART NUMBER

1284-051284-061284-071284-081284-091284-101284-151284-201284-251284-271284-301284-401284-451284-501284-551284-601284-701284-801284-901284-100

DRIVESIzE

5IP6IP7IP8IP9IP


100IP

REFERENCENUMBER



100-PLI-800

#1284 EXTRA (TXP) PRODUCTION GO NO-GO GAGE CIQ-804.1.2

FOR INTERNAL EXTRA (TXP) RECESS HEAD SCREWS REFERENCES: CIQ-804.1, & CIQ-804.2


8

REFERENCENUMBER



100-PLI-601

#1290 EXTRA (TXP) TAMPER RESISTANT PENETRATION GAGE

DRIVESIzE

5IPR6IPR7IPR8IPR9IPR

10IPR15IPR20IPR25IPR27IPR30IPR40IPR45IPR50IPR55IPR60IPR70IPR80IPR90IPR

100IPR

PART NUMBER

1290-051290-061290-071290-081290-091290-101290-151290-201290-251290-271290-301290-401290-451290-501290-551290-601290-701290-801290-901290-100

FOR INTERNAL EXTRA (TXP) TAMPER RESISTANT RECESS SCREWS REFERENCES: NIQ-611 & CIQ-611

PART NUMBER

1285-051285-061285-071285-081285-091285-101285-151285-201285-251285-271285-301285-401285-451285-501285-551285-601285-701285-801285-901285-100


DRIVESIzE

5IP6IP7IP8IP9IP


100IP

#1285 EXTRA (TXP) FINAL INSPECTION GO GAGE CIQ-811

REFERENCENUMBER



100-PLI-801



9

REFERENCENUMBER



100-PLI-600

#1291 EXTRA (TXP) TAMPER RESISTANT GO PENETRATION GAGE

DRIVESIzE



100IPR

PART NUMBER

1291-051291-061291-071291-081291-091291-101291-151291-201291-251291-271291-301291-401291-451291-501291-551291-601291-701291-801291-901291-100

FOR INTERNAL EXTRA (TXP) TAMPER RESISTANT RECESS SCREWS REFERENCES: NIQ-804.1,.2 & CIQ-804.1,.2

When Ordering Specify Inch Or Metric Dial Indicator, SPC-Compatible With Digital Indicators. All Gage Probes Are Heat Treated, ThermallyStabilized And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long Form Calibration Certificates Provide Traceability To(NIST) National Institute Of Standards & Technology.

REFERENCENUMBER



100-PLI-605

#1292 EXTRA (TXP) TAMPER RESISTANT NO-GO FALLAWAY GAGE

DRIVESIzE



100IPR

PART NUMBER

1292-051292-061292-071292-081292-091292-101292-151292-201292-251292-271292-301292-401292-451292-501292-551292-601292-701292-801292-901292-100


FOR INTERNAL EXTRA (TXP) TAMPER RESISTANT RECESS SCREWS REFERENCES: NIQ-612 & CIQ-612

10

DRIVESIzE

5IPR6IPR7IPR8IPR9IPR10IPR15IPR20IPR25IPR27IPR30IPR40IPR45IPR50IPR55IPR60IPR70IPR80IPR90IPR100IPR

PART NUMBER

1294-051294-061294-071294-081294-091294-101294-151294-201294-251294-271294-301294-401294-451294-501294-551294-601294-701294-801294-901294-100

#1294 EXTRA (TXP) TAMPER RESISTANT GO NO-GO GAGE CIQ-804.1

FOR INTERNAL EXTRA (TXP) TAMPER RESISTANT RECESS SCREWS REFERENCES: NIQ-804.1,.2 & CIQ-804.1,.2

REFERENCENUMBER



100-PLI-600

PART NUMBER

1285-051285-061285-071285-081285-091285-101285-151285-201285-251285-271285-301285-401285-451285-501285-551285-601285-701285-801285-901285-100

DRIVESIzE

5IPR6IPR7IPR8IPR9IPR10IPR15IPR20IPR25IPR27IPR30IPR40IPR45IPR50IPR55IPR60IPR70IPR80IPR90IPR100IPR

#1295 EXTRA (TXP) TAMPER RESISTANT FINAL GAGE NIQ-611

REFERENCENUMBER



100-PLI-601



11

FOR INTERNAL EXTRA (TXP) TAMPER RESISTANT RECESS SCREWS REFERENCES: NIQ-611, CIQ-611

GAGEREFERENCE

1-TXE-9112-TXE-9114-TXE-9115-TXE-9116-TXE-9117-TXE-9118-TXE-911

10-TXE-91111-TXE-91112-TXE-91114-TXE-91116-TXE-91118-TXE-91120-TXE-91124-TXE-91128-TXE-91132-TXE-91136-TXE-91140-TXE-91144-TXE-911

FOR EXTERNAL 6-LOBE (TX) BOLTS & FLANGE HEADS STYLES REFERENCES: TMF-801.1, TXQ-801.1

DRIVESIzE

E1E2E4E5E6E7E8E10E11E12E14E16E18E20E24E28E32E36E40E44

PART NUMBER

2185-012185-022185-042185-052185-062185-072185-082185-102185-112185-122185-142185-162185-182185-202185-242185-282185-322185-362185-402185-44

#2185 6-LOBE (TX) RECEIVING INSPECTION GO GAGE TXQ-801.1

DRIVESIzE


GAGEREFERENCE

1-TXE-9002-TXE-9004-TXE-9005-TXE-9006-TXE-9007-TXE-9008-TXE-9009-TXE-900

10-TXE-90012-TXE-90014-TXE-90016-TXE-90018-TXE-90020-TXE-90024-TXE-90028-TXE-90032-TXE-90036-TXE-90040-TXE-90044-TXE-900

PART NUMBER

2190-012190-022190-042190-052190-062190-072190-082190-102190-112190-122190-142190-162190-182190-202190-242190-282190-322190-362190-402190-44

#2190 6-LOBE (TX) PRODUCTION GO NO-GO GAGE TQM-801

FOR EXTERNAL 6-LOBE (TX) BOLTS & FLANGE HEADS STYLES REFERENCES: TMF-801, TQM-801

Universal’s External Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life.Long Form Calibration Certifcate Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) National InstituteOf Standards & Technology.

Universal’s External Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life.Long Form Calibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) NationalInstitute Of Standards & Technology.

12

FOR 6-LOBE (TX) DRIVER BITS, KEYS & SCREWDRIVERSREFERENCES: TXF-805.1, TXQ-805.1

DRIVESIzE

T1T2T3T4T5T6T7T8T9

T10T15T20T25T27T30T40T45T50T55T60T70T80T90T100

PART NUMBER

2196-012196-022196-032196-042196-052196-062196-072196-082196-092196-102196-152196-202196-252196-272196-302196-402196-452196-502196-552196-602196-702196-802196-902196-100

#2196 6-LOBE (TX) DRIVER BIT & KEY GAGE TXQ-805.1

GAGEREFERENCE

1-TXI-9212-TXI-9213-TXI-9214-TXI-9215-TXI-9216-TXI-9217-TXI-9218-TXI-9219-TXI-921

10-TXI-92115-TXI-92120-TXI-92125-TXI-92127-TXI-92130-TXI-92140-TXI-92145-TXI-92150-TXI-92155-TXI-92160-TXI-92170-TXI-92180-TXI-92190-TXI-921100-TXI-921

Universal’s Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long FormCalibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) National Institute OfStandards & Technology.

GAGEREFERENCE

1-TXE-9152-TXE-9154-TXE-9155-TXE-9156-TXE-9157-TXE-9158-TXE-91510-TXE-91511-TXE-91512-TXE-91514-TXE-91516-TXE-91518-TXE-91520-TXE-91524-TXE-91528-TXE-91532-TXE-91536-TXE-91540-TXE-91544-TXE-915

#2193 6-LOBE (TX) EXTERNAL INSPECTION GAGE DIN34801 IFI-562 TXQ-803

FOR EXTERNAL 6-LOBE (TX) BOLTS & FLANGE HEADS STYLES REFERENCES: TMQ-803, TXQ-803, DIN34801 & IFI-562

DRIVESIzE


PART NUMBER

2193-012193-022193-042193-052193-062193-072193-082193-102193-112193-122193-142193-162193-182193-202193-242193-282193-322193-362193-402193-44


13

DRIVESIzE

T5T6T7T8T9

T10T15T20T25T27T30T40T45T50T55T60T70T80T90T100

PART NUMBER

2197-052197-062197-072197-082197-092197-102197-152197-202197-252197-272197-302197-402197-452197-502197-552197-602197-702197-802197-902197-100

#2197 6-LOBE (TX) USER DRIVER BIT & KEY GAGE TXQ-805.4

GAGEREFERENCE

5-TXI-9226-TXI-9227-TXI-9228-TXI-9229-TXI-922

10-TXI-92215-TXI-92220-TXI-92225-TXI-92227-TXI-92230-TXI-92240-TXI-92245-TXI-92250-TXI-92255-TXI-92260-TXI-92270-TXI-92280-TXI-92290-TXI-922100-TXI-922

FOR 6-LOBE (TX) DRIVER BITS, KEYS & SCREWDRIVERSREFERENCES: TQM-805.4, TMQ-805.4, TXQ-805.4


GAGEREFERENCE

5-PLE-8116-PLE-8117-PLE-8118-PLE-811

10-PLE-81111-PLE-81112-PLE-81114-PLE-81116-PLE-81118-PLE-81120-PLE-81122-PLE-81124-PLE-81126-PLE-81128-PLE-81130-PLE-81132-PLE-81134-PLE-81136-PLE-81138-PLE-81140-PLE-81142-PLE-81144-PLE-811

FOR EXTERNAL EXTRA (TXP) BOLTS & FLANGE HEADS STYLES REFERENCES: NIQ-801.1, 801.1A, 801.1B, & FORD WB900 STANDARDS

DRIVESIzE

5EP6EP7EP8EP

10EP11EP12EP14EP16EP18EP20EP22EP24EP26EP28EP30EP32EP34EP36EP38EP40EP42EP44EP

PART NUMBER

2285-052285-062285-072285-082285-102285-112285-122285-142285-162285-182285-202285-222285-242285-262285-282285-302285-322285-342285-362285-382285-402285-422285-44

#2285 EXTRA (TXP) FINAL INSPECTION GO GAGE FORD WB900/NIQ-801.1

Universal’s Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long FormCalibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (NIST) National Institute OfStandards & Technology.

14

DRIVESIzE

5EP6EP7EP8EP


PART NUMBER

2293-052293-062293-072293-082293-102293-112293-122293-142293-162293-182293-202293-222293-242293-262293-282293-302293-322293-342293-362293-382293-402293-422293-44

#2293 EXTRA (TXP) EXTERNAL INSPECTION GAGE WB900 / NIQ-803

FOR EXTERNAL EXTRA (TXP) BOLT HEADS & FLANGE HEADS STYLES REFERENCES: NIQ-803, & FORD WB900 STANDARDS

GAGEREFERENCE

5-PLE-8156-PLE-8157-PLE-8158-PLE-815


DRIVESIzE

5EP6EP7EP8EP


GAGEREFERENCE

5-PLE-8006-PLE-8007-PLE-8008-PLE-800


PART NUMBER

2290-052290-062290-072290-082290-102290-112290-122290-142290-162290-182290-202290-222290-242290-262290-282290-302290-322290-342290-362290-382290-402290-422290-44

#2290 EXTRA (TXP) PRODUCTION GO NO-GO GAGE CIQ-801,A,B

FOR EXTERNAL EXTRA (TXP) BOLT HEADS & FLANGE HEADS STYLES REFERENCES: CIQ-801, 801A, 801B, & FORD WB900 STANDARDS



15


FOR EXTERNAL EXTRA (TXP) DRIVER BITS, KEYS & SCREWDRIVERSREFERENCES: NIQ-613 STANDARDS

DRIVESIzE


10IPR15IPR20IPR25IPR27IPR30IPR40IPR45IPR50IPR55IPR60IPR70IPR80IPR90IPR100IPR

PART NUMBER

2298-052298-062298-072298-082298-092298-102298-152298-202298-252298-272298-302298-402298-452298-502298-552298-602298-702298-802298-902298-100

#2298 EXTRA (TXP) TAMPER RESISTANT DRIVER BIT, KEY, GAGE

GAGEREFERENCE


10-PLI-62215-PLI-62220-PLI-62225-PLI-62227-PLI-62230-PLI-62240-PLI-62245-PLI-62250-PLI-62255-PLI-62260-PLI-62270-PLI-62280-PLI-62290-PLI-622100-PLI-622

DRIVESIzE

5IP6IP7IP8IP9IP

10IP15IP20IP25IP27IP30IP40IP45IP50IP55IP60IP70IP80IP90IP100IP

PART NUMBER

2297-052297-062297-072297-082297-092297-102297-152297-202297-252297-272297-302297-402297-452297-502297-552297-602297-702297-802297-902297-100

#2297 EXTRA (TXP) USER DRIVER BIT, KEY, GAGE NIQ-813

GAGEREFERENCE


10-PLI-82215-PLI-82220-PLI-82225-PLI-82227-PLI-82230-PLI-82240-PLI-82245-PLI-82250-PLI-82255-PLI-82260-PLI-82270-PLI-82280-PLI-82290-PLI-822100-PLI-8 22

FOR EXTERNAL EXTRA (TXP) DRIVER BITS, KEYS & SCREWDRIVERSREFERENCES: NIQ-813


16

PARTDESCRIPTION

GAGE BOX GRAY (SINGLE PIECE)

GAGE BOX XL GRAY (SINGLE PIECE)

GAGE BOX BLACK (2 PIECE SET)

GAGE BOX BLACK (FOUR PIECES)

GAGE BOX RED (FOUR PIECES)

PART NUMBER

8900-01

8900-02

8900-03

8900-04

8900-05

UNIVERSAL PENETRATION GAGE STORAGE BOXESSTORAGE & SHIPPING PROTECTION

Universal’s Plastic Gage Boxes Are Designed To Fit All Penetration Style Gages. There Are Two Internal Foam Velvet Lining Sizes That WillOffer The Gage Storage And Protection That Will Assure Years Of Use. These Cases Offer The Best And Most Economical Way To Protect YourInvestment From Any Damage When Not Being Used.

#8900 GAGE STORAGE BOXES

8900-02

8900-01

8900-03

8900-048900-05

17

#8916 TOTAL RECESS DEPTH GAGE B107.600 & ASME B18.6.4 /.5M

RECESSSIzE

0

1

2

3

4

PART NUMBER

8916-00

8916-01

8916-02

8916-03

8916-04

FOR TOTAL RECESS DEPTH; 1, 1A, II & III TYPE SCREWSREFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS

When Ordering Specify Inch Or Metric Dial Indicator, SPC-Compatible Digital Indicators Are Available. Gage Probes Are Heat Treated,Thermally Stabilized And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long Form Calibration Certificates ProvideTraceability To (N.I.S.T) National Institute Of Standards & Technology.

#8915 SCREW SLOT PENETRATION GAGE B107.600 & ASME B18.6.4 /.5M

PARTDESCRIPTION

SCREW SLOT PENETRATION GAGE

METRIC SLOT SCREW SIzE M2 THRU M10INCH SLOT SCREW SIzE #1 THRU 1/2”

PART NUMBER

8915-01

FOR SCREW SLOTTED TYPE RECESS HEAD SCREWSREFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS


18

RECESSSIzE

0

1

2

3

4

#9000 TYPE 1 PENETRATION GAGES B107.600 & ASME B18.6.4 /.5M

PART NUMBER

9000-00

9000-01

9000-02

9000-03

9000-04


FOR PHILLIPS TYPE I, TYPE z, CROSS RECESS HEAD SCREWS REFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS

RECESSSIzE

0

1

2

3

4

PART NUMBER

9001-00

9001-01

9001-02

9001-03

9001-04

#9001 TYPE 1 PLUG GAGES B107.600 & ASME B18.6.4 /.5M

FOR PHILLIPS TYPE I, TYPE z, CROSS RECESS HEAD SCREWS REFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS

Plug Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long FormCalibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) National Institute OfStandards & Technology.

19

#9002 TYPE 1 GO NO-GO RING GAGE B107.600 & ASME B18.6.4 /.5M

RECESSSIzE

0

1

2

3

4

PART NUMBER

9002-00

9002-01

9002-02

9002-03

9002-04

FOR PHILLIPS TYPE I, TYPE z, DRIVER BITS & SCREWDRIVERS REFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS

Test Blocks Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long FormCalibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) National Institute OfStandards & Technology.

#9003 TYPE 1 TEST BLOCK GAGES B107.600 & ASME B18.6.4 /.5M

RECESSSIzE

0

1

2

3

4

PART NUMBER

9003-00

9003-01

9003-02

9003-03

9003-04

FOR PHILLIPS TYPE I, TYPE z, DRIVER BITS & SCREWDRIVERS REFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS

Gage Rings Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long FormCalibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) National Institute OfStandards & Technology.

20

RECESSSIzE

0

1

2

3

4

PART NUMBER

9006-00

9006-01

9006-02

9006-03

9006-04

#9006 TYPE IA PENETRATION GAGES B107.600 & ASME B18.6.4 /.5M

FOR POzIDRIVE, TYPE IA, TYPE z RECESSES HEAD SCREWSREFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS


RECESSSIzE

0

1

2

3

4

PART NUMBER

9007-00

9007-01

9007-02

9007-03

9007-04

#9007 TYPE IA PLUG GAGES B107.600 & ASME B18.6.4 /.5M

FOR POzIDRIVE, TYPE IA, TYPE z RECESSES HEAD SCREWSREFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS


21

#9008 TYPE IA GO NO-GO RING GAGE B107.600 & ASME B18.6.4 /.5M

RECESSSIzE

0

1

2

3

4

PART NUMBER

9008-00

9008-01

9008-02

9008-03

9008-04

FOR POzIDRIVE, TYPE IA, TYPE z DRIVER BITS & SCREWDRIVERS REFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS

#9009 TYPE IA TEST BLOCK GAGES B107.600 & ASME B18.6.4 /.5M

RECESSSIzE

0

1

2

3

4

PART NUMBER

9009-00

9009-01

9009-02

9009-03

9009-04

FOR POzIDRIVE, TYPE IA, TYPE z DRIVER BITS & SCREWDRIVERS REFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS



22

RECESSSIzE

0

1

2

3

4

PART NUMBER

9011-00

9011-01

9011-02

9011-03

9011-04

#9011 TYPE II PENETRATION GAGES B107.600 & ASME B18.6.4 /.5M

FOR TYPE II FREARSON RECESS HEAD SCREWSREFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS


RECESSSIzE

0

1

2

3

4

PART NUMBER

9012-00

9012-01

9012-02

9012-03

9012-04

#9012 TYPE II PLUG GAGES B107.600 & ASME B18.6.4 /.5M

FOR TYPE II FREARSON RECESS HEAD SCREWSREFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS


23

#9013 TYPE II GO NO-GO RING GAGE B107.600 & ASME B18.6.4 /.5M

RECESSSIzE

0

1

2

3

4

PART NUMBER

9013-00

9013-01

9013-02

9013-03

9013-04

FOR TYPE II FREARSON DRIVER BITS & SCREWDRIVERS REFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS

#9014 TYPE II TEST BLOCK GAGES B107.600 & ASME B18.6.4 /.5M

RECESSSIzE

0

1

2

3

4

PART NUMBER

9014-00

9014-01

9014-02

9014-03

9014-04

FOR TYPE II FREARSON DRIVER BITS & SCREWDRIVERS REFERENCES: ANSI, ISO, JIS, DIN, IFI, BS, AND GB STANDARDS



24

DRIVESIzE

00

0

1

2

3

4

PART NUMBER

9016-00

9016-0

9016-1

9016-2

9016-3

9016-4

#9016 TYPE III SQUARE PENETRATION GAGES ASME B18.6.3/.5M

FOR TYPE III SQUARE RECESS HEAD SCREWS REFERENCES: ASME B18.6.3 / B18.6.5M STANDARDS

#9017 TYPE III SQUARE PLUG GAGES ASME B18.6.3/.5M

RECESSSIzE

00

0

1

2

3

4

PART NUMBER

9017-00

9017-0

9017-1

9017-2

9017-3

9017-4

FOR TYPE III SQUARE RECESS HEAD SCREWS REFERENCES: ASME B18.6.3 / B18.6.5M STANDARDS



25

#9018 TYPE III SQUARE GO NO-GO RING GAGES ASME B18.6.3/.5M

RECESSSIzE

00

0

1

2

3

4

PART NUMBER

9018-00

9018-0

9018-1

9018-2

9018-3

9018-4

FOR TYPE III SQUARE RECESS DRIVER BITS & SCREWDRIVERS REFERENCES: ASME B18.6.3 / B18.6.5M STANDARDS

#9019 TYPE III SQUARE TEST BLOCKS ASME B18.6.3/.5M

RECESSSIzE

00

0

1

2

3

4

PART NUMBER

9019-00

9019-0

9019-1

9019-2

9019-3

9019-4

FOR TYPE III SQUARE RECESS DRIVER BITS & SCREWDRIVERS REFERENCES: ASME B18.6.3 / B18.6.5M STANDARDS



26

PART NUMBER

9025-039025-059025-069025-079025-099025-109025-129025-149025-159025-189025-219025-259025-319025-379025-439025-509025-569025-629025-759025-87

#9025 HEXAGON PENETRATION GAGES ASME/ANSI B18.3

FOR HEXAGON SOCKETS, SHOULDER AND SET SCREWS REFERENCE: ASME/ANSI B18.3 STANDARDS

HEXAGONSIzE

.035”

.050”1/16”5/64”3/32”7/64”1/8”9/64”5/32”3/16”7/32”1/4”5/16”3/8”7/16”1/2”9/16”5/8”3/4”7/8”

When Ordering Specify Inch Or Metric Dial Indicator, SPC-Compatible Digital Indicators And Tamper-Proof Style On Sizes 5/64” to 7/8”Available. Gage Probes Are Heat Treated, Thermally Stabilized And Surface Treated To Provide Additional Wear To Maximize Gage Life. LongForm Calibration Certificates Provide Traceability To (N.I.S.T) National Institute Of Standards & Technology.

PART NUMBER

9030-0339030-0489030-0609030-0699030-0729030-0769030-0969030-1119030-1339030-1459030-1689030-1839030-2169030-2519030-2919030-3729030-4549030-5959030-6209030-6899030-790

#9030 SPLINE PENETRATION GAGES ASME/ANSI B18.3

FOR SPLINE SOCKETS, SHOULDER & SET SCREWSREFERENCE: ASME/ANSI B18.3 STANDARDS

SPLINESIzE

0.0330.0480.0600.0690.0720.0760.0960.1110.1330.1450.1680.1830.2160.2510.2910.3720.4540.5950.6200.6980.790


27

#9040 METRIC HEXAGON PENETRATION GAGES ASME/ANSI B18.3.6M

FOR HEXAGON SOCKETS, SHOULDER AND SET SCREWS REFERENCE: ASME/ANSI, ISO, JIS, DIN, BS, AND GB STANDARDS

When Ordering Specify Inch Or Metric Dial Indicator, SPC-Compatible Digital Indicators And Tamper-Proof Style On Sizes 2mm to 46mmAvailable. Gage Probes Are Heat Treated, Thermally Stabilized And Surface Treated To Provide Additional Wear To Maximize Gage Life. LongForm Calibration Certificates Provide Traceability To (N.I.S.T) National Institute Of Standards & Technology.

PART NUMBER

9040-0.79040-0.99040-1.39040-1.59040-1.69040-2.09040-2.59040-3.09040-4.09040-5.09040-6.09040-8.09040-109040-129040-149040-169040-179040-199040-229040-24

HEXAGONSIzE

0,7mm0,9mm1,3mm1,5mm1,6mm2,0mm2,5mm3,0mm4,0mm5,0mm6,0mm8,0mm10mm12mm14mm16mm17mm19mm22mm24mm

#9035 METRIC SPLINE PENETRATION GAGES ASME/ANSI B18.3.1.6M

FOR SPLINE SOCKETS, SHOULDER & SET SCREWS REFERENCE: ASME/ANSI B18.3.1M, & 6M STANDARDS

When Ordering Specify Inch Or Metric Dial Indicator. SPC-Compatible Digital Indicators Are Available. Gage Probes Are Heat Treated,Thermally Stabilized And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long Form Calibration Certificates ProvideTraceability To (N.I.S.T) National Institute Of Standards & Technology.

PART NUMBER

9035-0849035-1229035-1529035-1829035-2439035-2449035-2819035-2829035-3379035-3689035-4059035-4649035-5499035-5489035-6389035-7399035-9549035-11539035-1511

SET SCREWSPLINE SIzE

0,841,221,52

2,44

2,82

3,684,05

5,49

6,38

9,5411,5315,11

S.H.C.SSPLINE SIzE

1,8292,438

2,819

3,378

4,648

5,486

7,391

28

PART NUMBER

9044-1.6_9044-2.0_9044-2.5_9044-3.0_9044-3.5_9044-4.0_9044-5.0_9044-6.0_9044-8.0_9044-10_9044-12_9044-14_9044-16_9044-18_

SCREWSIzE

M1,6M2

M2,5M3

M3,5M4M5M6M8M10M12M14M16M18

#9044 OFFSET CRUCIFORM GO NO-GO GAGE ISO14277 & 14278

FOR CRUCIFORM RECESS TORQ SET RIBBED SCREWSREFERENCES: ISO14277, ISO14278 & ISO7794 STANDARDS


RECESSSIzE

013468101/45/163/87/161/29/165/83/4

PART NUMBER

9043-009043-019043-039043-049043-069043-089043-109043-259043-319043-379043-439043-509043-569043-639043-75

#9043 OFFSET CRUCIFORM GO NO-GO GAGE NASM14191 & MS33781

FOR CRUCIFORM RECESS TORQ SET RIBBED SCREWSREFERENCE: NAS0025, NASM14191 & NASM33781 STANDARDS


29

GAGE TYPE(C) NOT GO

R1,6CR2C

R2,5CR3C

R3,5CR4CR5CR6CR8C

R10CR12CR14CR16CR18C

GAGE TYPE (A) GO

R1,6AR2A

R2,5AR3A

R3,5AR4AR5AR6AR8AR10AR12AR14AR16AR18A

GAGE TYPE(A) GO

0 A1 A3 A4 A6 A8 A

10 A1/4 A

5/16 A3/8 A

7/16 A1/2 A

9/16 A5/8 A3/4 A

GAGE TYPE(C) NOT GO

0 C1 C3 C4 C6 C8 C

10 C1/4 C

5/16 C3/8 C

7/16 C1/2 C

9/16 C5/8 C3/4 C

GAGE TYPE (A) GO

R1,6AR2A

R2,5AR3A

R3,5AR4AR5AR6AR8AR10AR12AR14AR16AR18A

PART NUMBER

9046-1.69046-2.09046-2.59046-3.09046-3.59046-4.09046-5.09046-6.09046-8.09046-109046-129046-149046-169046-18

SCREWSIzE

M1,6M2

M2,5M3

M3,5M4M5M6M8M10M12M14M16M18

#9046 OFFSET CRUCIFORM PENETRATION GAGES ISO14277 & 14278

FOR CRUCIFORM RECESS TORQ SET RIBBED SCREWSREFERENCES: ISO14277, ISO14278 & ISO7794 STANDARDS


RECESSSIzE

013468101/45/163/87/161/29/165/83/4

GAGE TYPE(A) GO

0 A1 A3 A4 A6 A8 A

10 A1/4 A

5/16 A3/8 A

7/16 A1/2 A

9/16 A5/8 A3/4 A

PART NUMBER

9045-009045-019045-039045-049045-069045-089045-109045-259045-319045-379045-439045-509045-569045-639045-75

#9045 OFFSET CRUCIFORM PENETRATION GAGE NASM14191 & 33781

FOR CRUCIFORM RECESS TORQ SET RIBBED SCREWSREFERENCE: NAS0025, NASM14191 & NASM33781 STANDARDS


30

PART NUMBER

9048-0609048-0869048-1129048-1389048-1649048-190J9048-1909048-2509048-3129048-3759048-4379048-5009048-5629048-6259048-7509048-8759048-100

RECESSDASH NO.

012344J56789101112131415

REFERENCE SIzE

012468

101/4

5/163/8

7/161/2

9/165/83/47/81

PART NUMBER

9047-0609047-0869047-1129047-1389047-1649047-190J9047-1909047-2509047-3129047-3759047-4379047-5009047-5629047-6259047-7509047-8759047-100

RECESSDASH NO.

012344J56789101112131415

#9048 TRI-SLOT GO NO-GO GAGES NAS4000

FOR TRI-SLOT RECESS THREE-WING RIBBED SCREWSREFERENCE: NAS4000, STANDARDS

#9047 TRI-SLOT PENETRATION GAGES NAS4000

FOR TRI-SLOT RECESS THREE-WING RIBBED SCREWSREFERENCE: NAS4000, STANDARDS

Gage Probes Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long FormCalibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) National Institute OfStandards & Technology.


REFERENCE SIzE

012468

101/4

5/163/8

7/161/2

9/165/83/47/81

31

#9052 12-POINT PENETRATION GAGES VW12014 / DIN34824

FOR 12-POINT TYPE RECESS HEAD SCREWSREFERENCES: DIN34824, & VW01043 NON-STANDARD GAGE

#9053 12-POINT GO NO-GO GAGES VW12014 / DIN34824

DRIVESIzE

M4

M4

M5

M6

M8

M10

M12

M14

M16

M18

M18

PART NUMBER

9053-04-DIN

9053-04

9053-05

9053-06

9053-08

9053-10

9053-12

9053-14

9053-16

9053-18-DIN

9053-18

DRIVESIzE

M4

M4

M5

M6

M8

M10

M12

M14

M16

M18

M18

PART NUMBER

9052-04-DIN

9052-04

9052-05

9052-06

9052-08

9052-10

9052-12

9052-14

9052-16

9052-18-DIN

9052-18



FOR 12-POINT TYPE RECESS HEAD SCREWSREFERENCES: DIN34824, & VW01043 STANDARDS

32

FOR HEXAGON RECESS SOCKETS, SHOULDER & SET SCREWS REFERENCES: ASME/ANSI B18.3 STANDARDS

#9055 HEXAGON GO NO-GO GAGES ASME/ANSI B18.3

Tamper-Proof Style On Sizes 5/64” to 7/8” Available. Gage Probes Are Heat Treated, Thermally Stabilized, And Surface Treated To ProvideAdditional Wear To Maximize Gage Life. Long From Calibration Certificates Provide Dimensions And Tolerances To Specified Standards AndAre Traceable To (N.I.S.T) National Institute Of Standards & Technology.

PART NUMBER

9055-069055-079055-099055-109055-129055-149055-159055-189055-219055-259055-319055-379055-439055-509055-569055-629055-759055-87

HEXAGONSIzE

1/16”5/64”3/32”7/64”1/8”9/64”5/32”3/16”7/32”1/4”5/16”3/8”7/16”1/2”9/16”5/8”3/4”7/8”

PART NUMBER

9060-0339060-0489060-0609060-0699060-0729060-0769060-0969060-1119060-1339060-1459060-1689060-1839060-2169060-2519060-2919060-3729060-4549060-5959060-6209060-6899060-790

#9060 SPLINE GO NO-GO GAGES ASME/ANSI B18.3

FOR SPLINE RECESS SOCKETS, SHOULDER & SET SCREWSREFERENCES: ASME/ANSI B18.3 STANDARDS

SPLINESIzE

0.0330.0480.0600.0690.0720.0760.0960.1110.1330.1450.1680.1830.2160.2510.2910.3720.4540.5950.6200.6980.790


33

#9075 METRIC HEXAGON GO NO-GO GAGES ASME/ANSI B18.3.1M

Tamper-Proof Style On Sizes 2mm to 24mm Available. Gage Probes Are Heat Treated, Thermally Stabilized, And Surface Treated To ProvideAdditional Wear To Maximize Gage Life. Long Form Calibration Certificates Provide Dimensions And Tolerances To Specified Standards AndAre Traceable To (N.I.S.T) National Institute Of Standards & Technology.

PART NUMBER

9075-0.79075-0.99075-1.39075-1.59075-1.69075-2.09075-2.59075-3.09075-4.09075-5.09075-6.09075-8.09075-109075-129075-149075-169075-179075-199075-229075-24

HEXAGONSIzE

0,7mm0,9mm1,3mm1,5mm1,6mm2,0mm2,5mm3,0mm4,0mm5,0mm6,0mm8,0mm10mm12mm14mm16mm17mm19mm22mm24mm

FOR HEXAGON RECESS SOCKETS, SHOULDER & SET SCREWSREFERENCES: ASME/ANSI 18.3.1M STANDARDS

#9065 METRIC SPLINE GO NO-GO GAGES ASME/ANSI B18.3.1,6M

FOR SPLINE RECESS SOCKETS, SHOULDER & SET SCREWS REFERENCES: ASME/ANSI B18.3.1M, & 6M STANDARDS


PART NUMBER

9065-0849065-1229065-1529065-1829065-2439065-2449065-2819065-2829065-3379065-3689065-4059065-4649065-5499065-5489065-6389065-7399065-9549065-11539065-1511

SET SCREWSPLINE SIzE

0,841,221,52

2,44

2,82

3,684,05

5,49

6,38

9,5411,5315,11

S.H.C.S.SPLINE SIzE

1,8292,438

2,819

3,378

4,648

5,486

7,391

34

#9076 METRIC HEXAGON GO NO-GO GAGES ISO 23429

GAGE CROSS REFERENCE METRIC HEXAGON SIZES

FOR HEXAGON RECESS SOCKETS, SHOULDER & SET SCREWSREFERENCES: ISO, JIS, DIN, BS, AND GB STANDARDS

Tamper-Proof Style On Sizes 2mm to 27mm Available. Gage Probes Are Heat Treated, Thermally Stabilized, And Surface Treated To ProvideAdditional Wear To Maximize Gage Life. Long Form Calibration Certificates Provide Dimensions And Tolerances To Specified Standards AndAre Traceable To (N.I.S.T) National Institute Of Standards & Technology.

HEXAGONSIzE

0,7mm0,9mm1,3mm1,5mm2,0mm2,5mm3,0mm4,0mm5,0mm6,0mm8,0mm10mm12mm14mm16mm17mm19mm22mm27mm

PART NUMBER

9076-0.79076-0.99076-1.39076-1.59076-2.09076-2.59076-3.09076-4.09076-5.09076-6.09076-8.09076-109076-129076-149076-169076-179076-199076-229076-27

ISO4762(DIN912)JIS1176

--

M1.4

M1.6 / M2M2.5M3

M4M6M6

M8M10M12

M14M16 / M18

-

M20 / M22M24 / M27

M30M33

ISO4762(DIN7991)JIS1194

---

-M3 M4

M5M6M8

M10M12

M14 / M16

M18 / M20M22 / M24

-

----

ISO 4026/4028(DIN 913/916)

JIS1177M1.4 / M1.6 / M1.8

M2M2.5

M3M4M5

M6M8M10

M12 / M14M16

M18 / M20

M22 / M24--

----

35

PART NUMBER

9076-0.79076-0.99076-1.3

9076-1.59076-2.09076-2.5

9076-3.09076-4.09076-5.0

9076-6.09076-8.09076-10

9076-129076-149076-16

9076-179076-199076-229076-27

HEXAGONNOMINAL

SIzE0.7mm0.9mm1.3mm

1.5mm2mm

2.5mm

3mm4mm5mm

6mm8mm

10mm

12mm14mm16mm

17mm19mm22mm24mm

DRIVESIzE

00

0

1

2

3

4

PART NUMBER

9089-00

9089-0

9089-1

9089-2

9089-3

9089-4

#9089 SQUARE PENETRATION GAGES ROBERTSON’S DRIVE

FOR SQUARE TYPE RECESS HEAD SCREWS REFERENCES: ROBERTSON’S SQUARE DRIVE STANDARDS

#9090 SQUARE PLUG GAGES ROBERTSON’S DRIVE

RECESSSIzE

00

0

1

2

3

4

PART NUMBER

9090-00

9090-0

9090-1

9090-2

9090-3

9090-4

FOR SQUARE TYPE RECESS HEAD SCREWS REFERENCES: ROBERTSON SQUARE DRIVE STANDARDS



36

#9091 SQUARE GO NO-GO RING GAGES ROBERTSON’S DRIVE

RECESSSIzE

00

0

1

2

3

4

PART NUMBER

9052-00

9052-0

9052-1

9052-2

9052-3

9052-4

FOR SQUARE RECESS DRIVER BITS & SCREWDRIVERSREFERENCES: ROBERTSON’S SQUARE DRIVE STANDARDS

#9092 SQUARE TEST BLOCK ROBERTSON’S DRIVE

RECESSSIzE

00

0

1

2

3

4

PART NUMBER

9092-00

9092-0

9092-1

9092-2

9092-3

9092-4

FOR SQUARE RECESS DRIVER BITS & SCREWDRIVERSREFERENCES: ROBERTSON SQUARE DRIVE STANDARDS

Ring Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long FormCalibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) National Institute OfStandards & Technology.


37

38

#9095 QUADREX PENETRATION GAGE ISOTEC QX-001,002

RECESSSIzE

00

0

1

2

3

4

PART NUMBER

9052-00

9052-0

9052-1

9052-2

9052-3

9052-4

FOR SQUARE RECESS DRIVER BITS & SCREWDRIVERSREFERENCES: ROBERTSON’S SQUARE DRIVE STANDARDS

#9096 QUADREX PENETRATION GAGE ISOTEC QX-001,002

RECESSSIzE

00

0

1

2

3

4

PART NUMBER

9092-00

9092-0

9092-1

9092-2

9092-3

9092-4

FOR SQUARE RECESS DRIVER BITS & SCREWDRIVERSREFERENCES: ROBERTSON SQUARE DRIVE STANDARDS

Ring Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. Long FormCalibration Certificates Provide Dimensions And Tolerances To Specified Standards And Are Traceable To (N.I.S.T) National Institute OfStandards & Technology.


#9100 PENETRATION GAGING STATIONS ASME B18.6.4 / B18.6.5M

PART NUMBER

9100-069100-129100-20575-123905-338264-504

PART DESCRIPTION

PENETRATION GAGING STATION SIX PROBES PENETRATION GAGING STATION TWELVE PROBESQUICK DISCONNECT NUT IDU DIGITAL INDICATOR, RG. .50”/12,7MM RES. .0005”/0,01MMSPC CONNECTING CABLE (1M)DIGIMATIC MINIPROCESSOR RECORDER

Universal Penetration Gaging Stations Provide Fast Interchangeability Of All Measuring Probes. This Self ContainedOrganized System Utilizes One Electronic Digital Indicator To Measure The Penetration Depth Of Fastener Recesses. DesignedFor The Shop Floor Or Inspection Room Use, All Steel Parts Are Hard Chrome Plated For Durability In Harsh Environments.With The Quick-Change Feature You Can Conveniently Change Probe Assemblies Without The Use Of Hand Tools, ReducingInspection Time. The System Has SPC Output Capability And May Be Attached To Most Data Processors.

SpecifyQuick Disconnect

9100-06

264-504

905338

9100-12

39

Universal Wobble Gage and Gaging Station Provides A Means For Determining The Compatibility Of Cross Recesses In TheHeads Of Screws With Companion Screw Drivers And Will Indicate The Point Where Deviation In The Recess Contours AffectsSatisfactory Driver Engagement. Recesses Which Exhibit Excessive Wobble Characteristics Will Cause Poor ScrewDriveability Because Of Drive Camout Prior To Attaining Normal Torque Level, Damage To Recess, And/Or Accelerated DriverWear. The Recess Wobble Gage Fixture Requires Plug Gages, Gage Handles And Pointers To Be Specifed When Ordering.

PART NUMBER

9200-009200-019200-029200-109200-15 9200-209200-219200-229200-239200-24

PART DESCRIPTION

WOBBLE GAGE PLUG HANDLE 0, 1 & 2 SIzESPLUG HANDLE 3 4 & 5 SIzESCROSS LINE POINTERS FOR 0, 1 & 2 SIzESCROSS LINE POINTERS FOR 3, 4 & 5 SIzESWOBBLE GAGING STATION BASE PROBE HOLDERS FOR TYPE I PROBE HOLDERS FOR TYPE IAPROBE HOLDERS FOR TYPE IIPROBE HOLDERS FOR TYPE III

#9200 WOBBLE GAGE & GAGING STATION ASME B18.6.3/.4/.5M

9200-00 9200-20

Gaging Limits For Type I & IAType II & III Recesses

Size Of Recess Gage Type I Type IANo. 00No. 0No. 1No. 2No. 3No. 4No. 5

-15º15º12º10º10º10º

-12º12º10º8º8º8º

Type III-

6º5º4º4º3º-

Type II-

12º12º10º8º6º-

40

Universal Torsional Strength Testing Fixture Meets The Testing Performance Requirements For Tapping And Machine ScrewsCovered By ANSI/ASME, SAE, GM, FORD, CHRYSLER, JIS, ISO And Other Standards. These Standards Require That FastenerScrews Must Be Tested For Ductility, Torsional Strength, Drive Test, Drive Torque, And Hydrogen Embrittlement. We ProvideAll Of The Testing Attachments And Accessories That Are Needed To Perform These Tests Including Standard Or ElectronicTorque Wrenches For Digital Output Of Data.

PART NUMBER

9300-375

930101930102932000933000933200933300933600933700

PART DESCRIPTION

3/8” TORSIONAL STRENGTH TESTING FIXTURE, 3/8” DRIVE, 0-900 IN/LBS. / 0-101 NM.

1”/25MM COLLET HOLDERS 2”/51MM COLLET HOLDERS SPLIT COLLETS FOR MACHINE SCREWS 1/4” (6MM) AND SMALLER (SPECIFY THREAD SIzES)SPLIT COLLETS FOR SHEET METAL SCREWS 1/4” (6MM) AND LARGER (SPECIFY THREAD SIzES)SOCKET DRIVER BIT HOLDERSDRIVER BITSTEST PLATE HOLDERSTEST PLATES (SPECIFY HOLE SIzES)

#9300 TORSIONAL TESTING FIXTURES ASME B18.6.4 / B18.6.5M

9300-375

933600

933700933000 932000

930101 930102

264-504-5A

41

PART NUMBER

9400-375

940000943200943325943500943700

PART DESCRIPTION

3/8” NAS TORSIONAL STRENGTH TESTING FIXTURE, 3/8” DRIVE, 0-900 IN/LBS. / 0-101 NM.

PIVOTING WEIGHT SYSTEM NAS STANDARDSSOCKET DRIVER BIT HOLDERSWEIGHT SET 5LB OR 10LB POUND INCREMENTSELECTRONIC TORQUE WRENCHESMECHANICAL TORQUE WRENCHES

Universal NAS Torsional Strength Testing Fixture Meets The Testing Performance Requirements For Aerospace ScrewsCovered By MIL-S-87114A Standards. This Fixture Requires That Fastener Screws Must Be Tested For Ductility, TorsionalDrive Torque, And Hydrogen Embrittlement. We Provide All Of The Testing Attachments And Accessories That Are Needed ToPerform These Tests Including Standard Or Electronic Torque Wrenches For Digital Output Of Data.

#9400 NAS TORSIONAL TESTING FIXTURES MIL-S-87114A

940000

943700

943500

264-504

42

PART NUMBER

9450-A19450-B29450-019450-029450-039450-049450-059450-06

PART DESCRIPTION

UNIVERSAL PROTRUSION HEIGHT GAGEUNIVERSAL PROTRUSION HEIGHT GAGE WITH DETENT STOPANSI/ASME 82° GAGING PLATE: #2 THROUGH 3/8”ANSI/ASME 100° GAGING PLATE: #2 THROUGH 3/8”ISO 90° GAGING PLATE: M2 THROUGH M10INCH BOLT GAGING PLATE: #4 THROUGH 3/4”METRIC BOLT GAGING PLATE: M3 THROUGH M20SEMS CHECK PLATE FOR MEASURING HEAD HEIGHTS & LENGTHS

This Protrusion Height Gaging Fixture Can Be Set-Up To Measure All Types Of Fastener Attributes Such As Head Heights, BodyDiameters, Across Flats, Across Corners, And Lengths. The Interchangeable Gaging Plates Are Offered In Both Inch AndMetric Sizes, Certified Hole sizes That Conform To ANSI/ASME, ISO, JIS, DIN, BS, & GB Standards. The Gaging Plates AreStainless Steel, Heat Treated, And Thermally Stabilized.

#9450 PROTRUSION HEIGHT GAGES ASME B18.6.4 / B18.6.5M

9450-B29450-A1

575-123575-123

9450-02

9450-01 9450-03 9450-04

9450-059450-06

43

Universal’s Precision Protrusion Height Gage Fixtures Can Be Set-Up To Measure All Types Of Aerospace And SpecialFasteners. The Interchangeable Gaging Bushings Offered In Both Inch And Metric Sizes, Certified And Conforming ToANSI/ASME, ISO, And NAS Standards. The Gaging Bushing Dies Are Made From Heat Treated High Speed Steel Or CarbideGaging Bushing Hole Sizes Are Measured By The “Height Over Ball” Method And Calculated To The Actual Sizes.

PART NUMBER

9455-009455-069455-##9455-##543-552543-452904338264-504

PART DESCRIPTION

PRECISION NAS PROTRUSION HEIGHT GAGE (2.5 µM)INSERT GAGE PLATE (6 BUSHING STATION) INTERCHANGEABLE GAGE BUSHING DIE(S)NAS526, NAS9800 STYLUS #1, #2, #3, & #4 MITUTOYO DIGIMATIC INDICATOR RANGE 1”/25.4MM RESOLUTION .00005”/0,001MMMITUTOYO ANALOG AND DIGIMATIC INDICATOR RANGE 1”/25.4MM RESOLUTION .00005”/0,001MMCABLE 1M DIGIMATIC MINIPROCESSOR SPC RECORDER

#9455 PRECISION PROTRUSION HEIGHT GAGES NAS AEROSPACE

543-472

9455-00

9455-06

264-504

543-552

904338

44

Universal Digital Length Gages Are Lightweight, Yet Very Durable Units That Provide A Fast, Accurate, And Repeatable MeansTo Measuring Products. The Slide Rod Assembly Ensures Close Alignment Throughout The Entire Measuring Range. ThisSystem Concentrates Load Force Onto Supported Bearing Surfaces Thereby Minimizing Any Load Transfer To The Scale UnitAnd Increasing Its Service Life. The length Gage Is Designed For The Shop Floor Or Inspection Room Use. Included Is A LexanGuard That Maximizes The Protection Of The Slectronic Scale From Operator Abuse. This System Offers An AlternativeToCalipers, Scales, And Other Devices And Has SPC Output Capability.

PART NUMBER

9475-049475-089475-129475-249475-20572-613572-614572-615

PART DESCRIPTION

4”/100MM DIGITAL LENGTH GAGE RESOLUTION .0005”/.0127MM / WEIGHT 6LBS/3KGS8”/200MM DIGITAL LENGTH GAGE RESOLUTION .0005”/.0127MM / WEIGHT 9LBS/4KGS12”/300MM DIGITAL LENGTH GAGE RESOLUTION .0005”/.0127MM / WEIGHT 13LBS/6KGS24”/600MM DIGITAL LENGTH GAGE RESOLUTION .0005”/.0127MM / WEIGHT 25LBS/12KGSSHOULDER BOLT LENGTH ATTACHMENT OPTIONAL 4”/100MM ABSOLUTE WATER RESISTANT DIGITAL DISPLAY OPTIONAL 6”/150MM ABSOLUTE WATER RESISTANT DIGITAL DISPLAYOPTIONAL 8”/200MM ABSOLUTE WATER RESISTANT DIGITAL DISPLAY

#9475 DIGITAL LENGTH GAGES

9475-20

9475-04

572-615

9475-08

9475-12

9475-20904338

45

PART DESCRIPTION

CONCENTRICITY GAGE MODEL F-10 LENGTHS UP TO 4”/100MM, MAX DIAMETERS 1”/25MMCONCENTRICITY GAGE MODEL F-20 LENGTHS UP TO 6”/150MM, MAX DIAMETERS 2”/50MMFASTENER RECESS CHECKING ATTACHMENTEXTERNAL BOLT CHECKING ATTACHMENTO.D. DIAMETER CHECKING ATTACHMENTSQUARENESS CHECKING ATTACHMENTMETRIC INDICATOR 0,01MMINCH INDICATOR .001” DIGITAL DIAL INDICATOR SPC, TIR OUTPUT

PART NUMBER

9500-109500-20301-00302-00303-00304-00

600-J080600-J520543-472B

This Gage Model Has Been Specifically Designed To Measure Misalignment And Eccentricity For Both External And InternalFastener Drive Systems. This Gage Offers A Quick, Accurate, And Repeatable Way To Measure Fastener Recess Runout AndRecess Punch Tooling W ithout Using Collets. The Single Element Probes Use One Carrier With An Indicator To Inspect AllTypes Of Fastener Drive Recesses From #4/ M2 To 1/2”/ M12. An Optional External Drive Checker Attachment Can BePurchased Separately For Inspecting External Drives. This Item Can Be Installed For Inspection Applications Requiring LargerMotions Of Travel, Such As Across Flats And Across Corners Of Hexagon Bolts.

301-00 FASTENER RECESS Attachment

302-00 EXTERNAL BOLT CHECKINGATTACHMENT

304-00 SQUARNESS CHECKING ATTACHMENT

303-00 O.D. DIAMETER CHECKING ATTACHMENT

#9500 DIGITAL RUNOUT RECESS CHECKER GAGES

264-504

904338

SPC/TIR543-472543-263

46

PART NO.

9700-019700-039700-05543-287905338264503

This Drill Point Web Thickness Gage Provides A Fast, Accurate, And Repeatable Way To Measure The Drill Point Dimensions Of SelfDrilling Screws. Specifically Designed For Mechanical Or Digital Indicators, This Gage Has A Range Of 0” to 3/8”/ 9.5mm. This GageIs Portable, Yet Durable, To Be Used In Harsh Manufacturing Environments. Standard Protected Precision Stroke Bearings And ARepeatable Spring Force Ensure Precise Measurements Throughout The Entire Range Of Travel.

TRI-LOBE™ Gage Provides A Fast, Accurate And Repeatable Way To Measure The “C” Dimensions Of Taptite® Screws. SpecificallyDesigned For A Mechanical Or Digital Dial For SPC, This Gage Has A Diameter Range From #4 Through 3/4” (M3 - M19). This Gage isPortable, Yet Durable To Be Used In Harsh Manufacturing Environments. Protected Precision Stroke Bearing Assembly And ARepeatable Spring Force Ensure Precise Measurements Throughout The Entire Range Of Travel.

PART DESCRIPTION

WEB THICKNESS GAGEBASE PLATE AND MOUNTING POST CARBIDE SHARP POINTS CARBIDE BALL POINTS .031/0,78MMCARBIDE BALL POINTS .046/1,16MMCARBIDE BALL POINTS .062/1,57MMDIAL INDICATOR .500” RANGE / .001” GRAD.DIAL INDICATOR 0,002MM RANGE / 12MM GRAD.DIGITAL INDICATOR FOR SPC .0005”/0,01MMSPC CONNECTING CABLEDPIHS MINIPROCESSOR/RECORDER

PART NUMBER

9600-019600-029600-059600-319600-469600-62600010600020543683905338264503

PART DESCRIPTION

TRI-LOBE GAGE FRAMESINGLE STAND 60 DEGREE TRI-LOBE™ ELEMENTSMITUTOYO DIGITAL INDICATOR WITH SPC .0001”/0,01MMSPC CONNECTING CABLEDPIHS MINIPROCESSOR/RECORDER

#9600 DRILL POINT WEB THICKNESS GAGE

#9700 TRI-LOBE TAPTITE GAGE

47

PART NUMBER

9800-109800-159800-32543-564575-123 264-5049053389800-109800-20

PART DESCRIPTION

DIGITAL STRAIGHTNESS GAGE LENGTHS UP TO 10”/250MM, DIAMETERS 0”- 1”/25MMDIGITAL STRAIGHTNESS GAGE LENGTHS UP TO 15”/400MM, DIAMETERS 0”- 2”/50MMDIGITAL STRAIGHTNESS GAGE LENGTHS UP TO 32”/800MM, DIAMETERS 0”- 4”/100MMMITUTOYO DIGIMATIC ID-H INDICATOR RANGE 2”/50.8MM RESOLUTION .00002”/0,5MµM ITUTOYO DIGIMATIC IDU INDICATOR RANGE 1”/25.4MM RESOLUTION .0005”/0,01MMDIGIMATIC MINIPROCESSOR RECORDER WITH SPC CONNECTING CABLE SPC CABLE FOR MINIPROCESSOR RECORDER (40”/1M)MASTER SETTING BLOCK .5”/15MM WITH TRACEABLE CERTIFCATE MASTER SETTING BLOCK 1”/25MM WITH TRACEABLE CERTIFCATE

Universal Straightness Gages Provides A Fast, Accurate And Repeatable Way To measure Straightness And Camber Of Shaft,Or Bolt Type Products. Specifically Designed With A Mechanical Or Digital For SPC, These Gages Are Portable, Yet Durable,To Be Used In Harsh Manufacturing Environments. The Stroke Bearing Assembly, Incline Angle Ensure Constant MeasuringForce Throughout The Entire Measurement. This Gaging Fixture Can Be Used For Measuring Straightness, Camber, Diameters,Flanges, And Tapers Sizes.

#9800 DIGITAL STRAIGHTNESS GAGES

543-564A

9800-15

575-123

264-504-5A

9800-32

904338

48

GAGING ROLLS- There are interchangeable gage rolls available for standard thread gaging applications. Each set of three rolls corresponds to one particular thread size. For measuring Pitch Diameter use Best Wire Rolls or Cone & Vee. For measuring FunctionalSize use Full Form rolls. For measuring Major Diameter use Plain Rolls. For measuring Minor Diameter (not shown) use included AngleRolls. For Special Thread Rolls priced on request.

BEST WIRE ROLLSPitch Diameter

(Minimum Material Condition)

FULL FORM ROLLSFunctional Diameter

(Maximum Material Condition)

PLAIN ROLLSMajor Diameter

(Multi Lobe Out-Of- Roundness)

3-POINT™ GAGE FRAME- Has a Self-Contained Alignment SystemThat Eliminates The Need For Setting Templates Or Micrometers ToAchieve Perfect 120° Spacing. The Frame Design Reduces TheInspection Space And Additional Expense Normally Required ByOther Systems Using Numerous Gage Frames For Different Sizes.

GAGE RANGE- The 3-POINT™ Thread Frames from #4 (3mm) to1-1/2” (40mm) With Two Adjustable Frames

12000-1 Frame; #4 (3mm) to 3/4” (20mm) 12000-2 Frame; 13/16” (22mm) to 1-1/2” (40mm)

GAGE PERFORMANCE- The Gage Roll Sets Are Easily ChangedFrom One Size To Another. The Lower Rolls Are Mounted In AFixed P osition to support the workpiece. The upper roll armassembly Exerts A Consistent force and actuates the indicatorproviding accurate readings.

GAGE DURABILITY- Thread rolls are designed to revolve with theworkpiece, distributing wear evenly. (OptionaL) TITANIUM-NITRIDE(TiN) coatings protects the gage roll surface and Sprovidesadditional hardness that extends gage roll life.

SPC COMPATIBLE- Universal gages provide the ideal system fordata collection. Adjustments can be made at the machine beforescrap is created, resulting in improved productivity and quality.

#12000 EXTERNAL 3-POINT THREAD GAGE

EXTERNAL GAGE ROLLERS

49

INTERNAL GAGING ELEMENTS- For measuring Pitch Diameter use single gaging elements “Cone & Vee” design. For measuring Functional Size use full form elements. For measuring Minor Size and Circularity use plain elements. For Special Thread Elements priced on request.

“CONE & VEE” ELEMENTSPitch Diameter

(Minimum Material Condition)

FULL FORM ELEMENTSFunctional Diameter

(Maximum Material Condition)

PLAIN ELEMENTSMinor Diameter

(Taper & Out-Of-Roundness)

#20000 INTERNAL 2-POINT™ THREAD GAGE INTERNAL THREAD GAGE FRAME- Utilizes advanced state of theart precision linear bearings ensuring zero deflection and accurate movement. Consistent gaging force and smooth gageaction guarantee repeatable readings throughout the entiremeasuring range.

GAGE RANGE- The Internal 2-POINT™ Frames from #4 (3mm) to1-1/2” (40mm) with two adjustable frames.

20000-01 Size Range; #4 (3mm) to 3/4” (20mm) 20000-02 Size Range; 13/16” (22mm) to 1-1/2” (40mm)

GAGE PERFORMANCE- The internal thread gaging elements areeasily set-up to use. With precision frame alignment, ThreadElements are easily changed from one size to another.

GAGE DURABILITY- Universal internal thread gage frames have athree year limited warranty. All internal gaging elements areTitanium-Nitride (TiN) coated for maximum wear. This coatingprotects the surface and provides additional hardness that extendsgage element life.

EFFICIENT AND COST EFFECTIVE- With a master thread settingring gage adjustments are made in seconds to the actual size. Thisprocess reduces inspection time to a third of that required forinspecting parts with “GO-NOT GO” plug gages.

INTERNAL GAGING ELEMENTS

50

• High Precision Gages Universal Punch Corp. incorporates 40 years of manufacturing experience intothe production of our Fastener Gages for the Automotive, Aerospace, Medical, Commercial and other industries.We manufacture many popular drive systems with worldwide inventories, such as Phillips, Type 1A, 12-Point,Hexalobular, Torx, 6-Lobe (TX), 6-Lobe Extra (TXP), Hexagon Sockets, Square Sockets, Cruciform, and Star. Inaddition to Penetration and Plug-type Gages, we also offer Wobble, Driver Bit, Protrusion Height, Thickness,Straightness, Screw Testing Fixtures, Concentricity, SPC Data Collection Systems and Gage Calibration Service.Our capabilities include producing custom and modified Gages to your specifications.

HIGH PRECISION PROCESSES

PRODUCTION GRINDING

PRECISION CRAFTSMANSHIP

AUTOMATED PRODUCTION

• Continuous Improvement Universal Punch Corp. is a global supplier for the fastener industry withproven quality that is second to none. We are continually working on improvements to our existing productofferings through new processes and technologies, which will expand our capabilities into new markets andapplications. We strive to be innovative in design and always attentive to the needs of our customers.

Universal Punch Corp., an ISO 9001 registered company, has been a leader in the tooling, gaging andmedical industries for 40 years. As part of our continuing commitment to providing precision and excellence inall of our products, we have expanded into a new state-of-the-art manufacturing facility. Our spacious new plantis equipped with modern machining processes, expanded heat treating facilities, increased inventory capacity,and calibration and inspection laboratory. Our certified quality management system ensures that all products soldconform to the required standards and specifications. All measuring equipment and gaging masters are directlytraceable to N.I.S.T. (National Institute of Standards & Technology). All certification processes and proceduresconform to ISO 17025 standards.

MEDICAL INSTRUMENTS AEROSPACE FASTENERS