35
HEXAGON ELECTRICAL (PTY) LTD SETTING NEW STANDARDS Hexagon Electrical has relocated to its new and improved premises which has ±6000m 2 workshop floor area. The new location makes it very accessible to highways. Hexagon Electrical manufactures equipment for the Mining Industry. We specialize in the design, manufacture and re-conditioning of a large range Flame Proof Motors, Non-Flame Proof Motors, Switch Gear, Transformers, Flame proof and Non-Flame Proof Enclosures, Flame Proof Cable Reels, Flame proof accessories, Spooling devices, Standard and Flame Proof motors for Ventilation fans and dust control systems.

HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

  • Upload
    others

  • View
    15

  • Download
    0

Embed Size (px)

Citation preview

Page 1: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

HEXAGON ELECTRICAL (PTY) LTD SETTING NEW STANDARDS

Hexagon Electrical has relocated to its new and improved premises which has ±6000m2

workshop floor area. The new location makes it very accessible to highways.

Hexagon Electrical

manufactures equipment

for the Mining Industry.

We specialize in the

design, manufacture and

re-conditioning of a large

range Flame Proof

Motors, Non-Flame Proof

Motors, Switch Gear,

Transformers, Flame

proof and Non-Flame

Proof Enclosures, Flame

Proof Cable Reels, Flame

proof accessories,

Spooling devices,

Standard and Flame

Proof motors for

Ventilation fans and dust

control systems.

Page 2: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

HEXAGON ELECTRICAL (Pty) Ltd

About Us

Hexagon Electrical (Pty) Ltd was launched on

the 1st October 2006 by purchasing the assets

from the Industrial Development Corporation.

Hexagon acquired the design, approvals and

intellectual properties which have enabled us

to enter into a very competitive market. From

the outset Hexagon was able to manufacture

and repair standard and flameproof motors,

switchgear and flame proof ventilation fans,

dust suppression systems, water pumps and

vibrator motors.

Hexagon Electrical (Pty) Ltd is 26% owned by

Historically Disadvantaged Individual.

However the value added to the Company by

the individual exceeds the fact of Historically

Disadvantaged.

Hexagon is a small company with very high

standards.

We have a fully equipped workshop with

experienced and well trained staff.

In striving for this goal we recognize:

Customer satisfaction as top priority for all employees,

The role of the Community and other Stakeholders,

The protection of the Environment.

OUR VALUES:

Customers are the focus of everything we do.

Our commitment is to MEET, UNDERSTAND AND EXCEED our customer’s requirements at

every opportunity.

Our employees are the strength of our company. We are working together as a dedicated

team.

Our work place is a place of open communication, participation and innovation.

We will continually pursue Engineering excellence by improving existing designs.

Quality Policy:

Hexagon Electrical continually strives for excellence in what we do. It is our goal to be

the preferred Supplier to the industry by satisfying and exceeding our customer's

specification and requirements with our workmanship and service at all times.

Our Vision:

To be acknowledged by our customers, employees, suppliers and shareholders as the

BEST IN THE MARKET IN WHICH WE COMPETE.

Page 3: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

ELECTRICAL DESIGN PROGRAM

Hexagon uses the most up-to-

date design program, designed

by a Professor from the

University of Witwatersrand,

making it possible to redesign

electrical motor windings to

suit any application.

Page 4: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

MECHANICAL DESIGN OFFICE

Hexagon makes use of

Inventor and AutoCAD

for designing and

simulating of product

designs.

Page 5: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

LIFTING FACILITIES

Bay 1 has a 5ton

double girder crane

servicing the

Winding Bay and

Flame Proofing Bay.

The current

layout of the

factory has four

operating bays:

Bay 2 has a 5ton

double girder crane

servicing the Machine

Bay, the Assembly Bay,

the Final Testing and

Dispatch Bays.

Bay 3 has a 5ton

double girder crane

servicing the

Incoming Bay,

Fabrication and Press

Shop. Bay 4 has a 25ton

double girder

crane operating

the Transformer

Section.

Page 6: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

STRIPPING, CLEANING AND ASSESSMENT AREA

.

All products are

disassembled, cleaned

and assessed. Burn-out

oven with computer

control to avoid over

temperatures.

Page 7: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

MECHANICAL ASSESSMENT

The individual parts

are inspected for any

faults and marked

for repair or part

replacement.

Page 8: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

ELECTRICAL ASSESSMENT INCLUDING CORE TESTING

Cores are tested for

electrical

properties,

winding,

connection etc.

The motor is

tested for any

electrical errors

and failures.

Page 9: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

LAMINATION PUNCHING WORKSHOP

Core and Rotor

punching done in-

house according to

electrical design for

motors up to 500kW.

Full design facility

designed by a Professor

from the University of

Witwatersrand from the

Electrical Engineering

Faculty.

Hexagon manufactures

rotor and stator packs for

use in the mining

industry, as well as a full

range of Pad Mount

flameproof motors for the

ventilation market.

Hexagon fabricates

copper bared rotors for

re-engineered motors

and is capable to replace

a die cast rotor with a

copper barred rotor.

Page 10: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

FABRICATION WORKSHOP

Hexagon has a 3.2m

Guillotine with a maximum

capability of cutting 6mm

plate, a 3m plate roller able

to roll plate size 12mm to

diameter of 300mm, 4xCO2

welding machines and

plasma cutting equipment.

Page 11: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

ENGINEERING WORKSHOP

All machining, drilling, rolling etc. are done in-house.

Hexagon possesses the following equipment:

3x centre lathes

1x surface grinder for sharpening of tools

1x 1.5m vertical boring mill

1x 2.5m vertical boring mill with 2m swing

1x milling machine for cutting of key ways

Page 12: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

BALANCING MACHINE

Hexagon carry out 2 plane balancing on a Shenck machine which can balance up to 700kg at 1200rpm, including

450kW. Each unit receives an automatic print-out which is placed in a Data Book. This is issued to the customer on

request. All testing is carried out in accordance with SANS 10242.

Page 13: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

FLAME PROOF INSPECTION

Hexagon has 6 accredited

flame proof inspectors

carrying out patrol

inspection on units being

assembled in accordance

with SANS 60079-0 and

SANS 60079-1.

Page 14: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

WINDING DEPARTMENT WITH ALL ELECTRICAL TEST

EQUIPMENT

State of the art electrical winding design facility designed by a

Professor from the University of Witwatersrand from the

Electrical Engineering Faculty, which enables us to form and

manufacture formed coils.

All our testing is carried out in accordance with SANS 10242 and

SANS 1561 using the following equipment:

2x ITIG Instruments to carry out pre-varnishing testing,

P.I. testing of winding and surge testing.

Core testing and rotor bar inspection equipment with PC

interface.

All instruments are calibrated at set

intervals and records are traceable to an

approved ATL

An Electrical Data Book is issued for each

unit leaving Hexagon Electrical.

Page 15: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

VPI VARNISH TANK AND CURING OVEN

Hexagon has a full V.P.I.

(Vacuum Pressure

Impregnation) System

using a state of the art

resin, with separate

double dip varnishing

facility.

Page 16: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

ASSEMBLY

Each unit is assembled in accordance

with SANS 10242 and SANS 1561 and

SANS 60079/1/15.

Assemblers are each equipped with

a full toolbox of the latest tools and

trained continually with new

technology.

Hexagon has a SKF Induction Bearing

Heater and a full set of fitting

equipment for fitting seals.

Page 17: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

TEST FACILITY

Hexagon test motors at full load 460kW, 6.6kV with 630kVA generator set and a complete fan test facility with conical and ventured

columns. Our submersible pump test bay is capable of up to 110kW for water pumps and fans. Hexagon possesses the following

equipment:

FAG vibration analyzer with P.C. interface

460kW Schenk dynamometer

1000kVA transformer with on load tap changer settings 0 - 650V and 0 - 3300V

200kVA transformer with 7 tap settings 0 - 1000V

200kVA transformer with 7 tap settings 0 - 500V for A.C. and D.C.

Page 18: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

SPRAY BAYS

Page 19: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

FINAL INSPECTION

All motors, panels, cable reels, etc. are inspected for outline sizes,

shaft extensions, spigot sizes, mounting holes, etc.

For every product leaving Hexagon, an

inspection form is issued and signed off.

Page 20: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

DISPATCH

Units ready for dispatch are individually wrapped and painted as per customer requirements and are fitted with anti-bernelling

devices and placed on pallets.

Page 21: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

TRANSPORT

3x 1ton

Ranger

LDV's

1x 8 ton

1x 4 ton

1x 1.5

ton

Page 22: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

EXTERNAL POWER

Hexagon accommodates

customers without losing any

time during load shedding as we

have an External Power Back Up

in the form of a 600kVA diesel

powered Perkins Gen Set which

is able to power the full facility

at the click of a switch.

Page 23: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

ADDITIONAL SERVICES

We can accommodate customers certification for

equipment done on site at Hexagon Electrical for use

underground like flame proofing of complete

drill rigs and fitting and commissioning of equipment

for use in Ex d locations.

Page 24: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

PRODUCTS

FLAME PROOF

Standard Flame Proof Motors Dust Suppression Flame Proof Switches

Water Cooled Flame Proof Motors Ventilation Flame Proof Lighting

Flame Proof Fan/Pad Mount Motors Flame Proof Enclosures Flame Proof Siren

Flame Proof Winch Motors Flame Proof Cable Reels Flame Proof Push Buttons

Flameproof Glands, Adaptors and Reducers

NON-FLAME PROOF

Non-Flame Proof Motors Spooling Devices

Non-Flame Proof Enclosures Other Products and Services

Page 25: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

Flame Proof Motors All motors manufactured and reconditioned in accordance with SANS 1561-1: 2006 and SANS 10242.

Standard Flame Proof Motors Hexagon manufactures new Flame Proof Standard Motors, repairs on Flame Proof Standard Motors and re-

designing of electrical and mechanical properties if required.

Flame Proof Standard Motor Range:

kW: 4kW - 400kW

Volts: 380V - 3300V

Speed: 2, 4, 6, 8 Pole

Frame: 112 - 355

Mounting: B3, B5 or special mounting required

Water Cooled Flame Proof Motors Hexagon manufactures new Flame Proof Water Cooled Motors, repairs on Flame Proof Water Cooled Motors

and re-designing of electrical and mechanical properties if required.

Flame Proof Water Cooled Motor Range:

kW: 11kW - 400kW

Volts: 380V - 3300V

Speed: 4, 6, 8 Pole

Frame: 160 - 315

Mounting: B3, B5 or special mounting required

Page 26: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

Flame Proof Fan/Pad Mount Motors Hexagon manufactures new Flame Proof Fan/Pad Mount Motors, repairs on Flame Proof Fan/Pad

Mount Motors and re-designing of electrical and mechanical properties if required.

Flame Proof Fan/Pad Mount Motor Range:

kW: 4kW - 75kW

Volts: 380V - 1000V

Speed: 2 & 4 Pole

Frame: 112 - 225

Mounting: B3, B5, B30

Flame Proof Winch Motors Hexagon manufactures new Flame Proof Winch Motors, repairs on Flame Proof Winch Motors and

redesigning of electrical and mechanical properties if required.

Flame Proof Winch Motor Range:

kW: 22kW - 75kW

Volts: 380V - 525V/1000V

Speed: 2, 4, 6 Pole

Frame: 180, 225, 250, 280

Mounting: B5

Page 27: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

Flame Proof Fans

Dust Suppression

Hexagon manufactures and repairs 11kW - 60kW Flame Proof Dust Suppression Fans as required.

Ventilation

Hexagon manufactures and repairs Flame Proof Ventilation Fansas required.

kW: 4kW - 75kW

Volts: 380V - 1000V

Ventilation and Jet Fans both can be mounted

on skids if requested.

Page 28: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

Flameproof Equipment

Flameproof Enclosures Hexagon manufactures and reconditions any Flame Proof Enclosures for specific applications. We also do modifications and redesigning to meet customer

requirements.

All Enclosures in accordance with SANS 10086-3: 2001,

SANS 60079-0: 2009 and SANS 60079-1: 2009.

Page 29: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

Flame Proof Cable Reels Hexagon manufactures and repairs all types of Cable Reels for various applications such as Drill Rigs and Shuttle Cars. Modifications

can also be done.

All Cable Reels to SANS 10086-3: 2001,SANS 60079-0: 2009 and SANS 60079-1: 2009.

Page 30: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

Flame Proof Accessories Flame Proof Switches

Hexagon manufactures various types of Switches such as Foot Switches, Pull Switches etc. We also

design new Switches to meet customer requirements.

All Switches in accordance with SANS 10086-3: 2001,SANS 60079-0: 2009 and SANS 60079-1: 2009.

Flame Proof Lighting

Hexagon manufactures various Flame Proof Lights such as Cluster Light, Maxi Light, Mini Light,

Fluorescent Lights, etc.

All Lighting in accordance with SANS 10086-3: 2001,SANS 60079-0: 2009 and SANS 60079-1: 2009.

Flame Proof Sirens

Hexagon manufactures Flame Proof Sirens.

All Sirens in accordance with SANS 10086-3: 2001,SANS 60079-0: 2009 and SANS 60079-1: 2009.

Page 31: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

Flame Proof Flashers

Hexagon manufactures Flame Proof Flashers.

All Flashers in accordance with SANS 10086-3: 2001,SANS 60079-0: 2009 and SANS 60079-1: 2009.

Flame Proof Push Buttons

Hexagon manufactures various types of Push Buttons and E-stops, Lockable and Non-Lockable.

We can also design new Push Buttons and E-stops to meet customer requirements.

All Push Buttons in accordance with SANS 10086-3: 2001, SANS 60079-0: 2009 and SANS 60079-1: 2009.

Flame Proof Glands, Adaptors & Reducers Hexagon manufacturse various types of cable glands for various cable sizes, various adaptors and reducers

and line bushings. All Glands, Adaptors and Reducers in accordance with SANS 10086-3: 2001, SANS

60079-0: 2009 and SANS 60079-1: 2009.

Page 32: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

Non-Flame Proof Non-Flame Proof Motors

Hexagon manufactures and repairs various Non-Flame Proof Motors such as Vibrator

Motors, Slip-ring Motors, High and Low Voltage Standard Non-Flame Proof Motors.

Non-Flame Proof Enclosures

Hexagon manufactures and reconditions various Non-Flame ProofEnclosures.

Page 33: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

Spooling Devices

Hexagon manufactures and repairs various spooling devices.

Other Products and Services Hexagon do full repairs on various types and makes of Flame Proof/Non-Flame Proof Motors, Enclosures, etc.

Page 34: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

CONTACT US

Office Number: Physical Address: +27 (0)86 110 6520 1 Coert Steynberg Street

Fax: Van Eck Park Ext 2 +27 (0)86 634 8945 Brakpan

Email: 1477

[email protected]

Website: Postal Address:

Coming soon PO Box 6876

Westwood Sales Director: Shakeel Abbas 1477 Cell: 083 737 8535

Email: [email protected]

General Manager: Erick Huntly

Cell: 082 563 7643

Email: [email protected]

Workshop Manager: Kenny Sweeney

Cell: 082 885 2751

Email: [email protected]

Sales Representatives:

Leon Lubbe

Cell: 084 734 5857

Email: [email protected]

Deon Pieterse

Cell: 083 399 2694

Email: [email protected]

Riaan Maartens

Cell: 076 981 6614

Email: [email protected]

Page 35: HEXAGON ELECTRICAL (PTY) LTD Hexagon Electrical SETTING ...hexelect.co.za/pdf_doc/Hexagon Elecrtrical Company Profile Final.pdf · Hexagon Electrical (Pty) Ltd is 26% owned by specification

SETTING NEW STANDARDS

CERTIFICATION