Upload
yannis
View
31
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Modeling Media Access in Embedded Two-Flow Topologies of Multi - hop Wireless Networks. Jingpu Shi Joint work with Dr. Michele Garetto and Dr. Edward Knightly Department of Electrical and Computer Engineering Rice University June 22, 2005. Motivation. - PowerPoint PPT Presentation
Citation preview
Modeling Media Access in Embedded Two-Flow Topologies of Multi-hop Wireless Networks
Jingpu Shi
Joint work with Dr. Michele Garetto and Dr. Edward KnightlyDepartment of Electrical and Computer Engineering
Rice University
June 22, 2005
Motivation Fairness problems in Multi-hop wireless networks.
Root cause: different and incomplete channel state information.
Those problems have not been very well understood. All Stations are in range
G. Bianchi. Performance analysis of the IEEE 802.11 distributed coordination function. IEEE Journal on Selected Areas in Communications, 18(3):535–547, March 2000.
Not all stations are in radio range ?
In this work, we view a network as a set of sub-graphs consisting two flows and characterize its media access.
Assumptions and Notations Identical transmission range and interference
range.
We only consider one-way flows.
A link is established if two stations are in radio range.
Aa is the first flow, Bb is the second flow.
All Possible TopologiesA
ba
B
Aa
Ab
Ba
AB
Bb
A
ba
B
Aa
ab
Ab
Ba
Bb
A
ba
B
Aa
ab
AB
Bb
A
ba
B
AaBa
AB
Bb
A
ba
B
Aa
ab
Ab
BaBb
A
ba
B
Aa Bb
(1) (2) (3) (4)
(5) (6) (8)
(9) (10) (11) (12)
A
ba
B
Aa
ab
Ab
AB
Bb
A
ba
B
Aa
Ab
BaBb
A
ba
B
Aa
AB
Bb
(7)A
ba
B
Aa
ab
Bb
A
ba
B
AaBa
Bb
A
ba
B
Aa
ab
Bb
Ba
Scenario Classification Senders Connected (SC): scenarios 2-7, where
senders of each flow are in radio range.
Asymmetric Incomplete State (AIS), scenarios 11 and 12, where senders are disconnected, asymmetric connections between the two flows.
Symmetric Incomplete State (SIS), scenario 8, 9 and 10, where senders are disconnected, symmetric connections between the two flows.
Scenario LikelihoodAssumptions and Illustration
What’s the probability of each scenario occurring, giving the two flows are connected?
Spatial analysis, assuming the two flows are uniformly distributed in a region and border effect is negligible.
Equal distance.
Scenario LikelihoodResults for each group
AIS and SIS class are highly likely to occur when distance between two hops becomes large.
Outline Motivation
Scenario identifications and their likelihood
Fairness simulations
Media access modeling
Performance Simulations With CSMA/CA protocol
Observations: SC-No fairness
problem. AIS-Both short-
term and long-term fairness problems.
SIS-Long-term fair, short-term unfair.
Root cause: different information about the channel.
Outline
Motivation Scenario identifications and their
likelihood Fairness simulations Modeling media access
Modeling Framework View at single station
Identify 4 different state idle channel channel occupied by successful transmissions channel occupied by a collision busy channel due to activity of other stations
Define probabilities Probability of the four stats and throughput of the station
Model AIS Class: Strategies and steps
Compute collision probability for the flow Aa.
Compute busy probability due to other transmissions for flow Bb
Use decoupling technique
Assume flow Bb never collides. Flow Aa never defers.
Model SIS ClassSample topology and modeling strategy
We analyze short-term unfairness.
Main difficulty: the two transmitting nodes are tightly correlated.
A Markov chain model using bi-dimensional state description.
Model SIS Class: Strategies and steps
We represent the system state as pair (SA, SB), where SA and
SB denote the backoff stage of Sender A and B respectively. Transition probability of the Markov chain.
ri is the probability that a station transmits after one slot in backoff stage i. f is the duration of the first packets (RTS or DATA) transmitted.
After solving the Markov chain, we can compute the transition time from state (m, 0) to (0,m), where m is the maximum backoff stage.
Model SIS ClassResults (cont.)
(C1) RTS/CTS access, m = 6, CWmax = 1024.(C2) RTS/CTS access, m = 8, CWmax = infinity.(C3) Basic access, m = 3, CWmax = 1024.(C4) Basic access, m = 6, CWmax = 1024.