MIN

OS

201

6 E

N 2

8/01

/201

6

MINOS 3D: One shot depositor with 3D movement MINOS 3D is an upgrade from the MINOS 2D, that is already equipped with a programmable belt for 2D effects. The 3D feature adds an extra dimension to the belt of the depositor, so it has a 2-axis movement. This makes the depositor suitable for decorating purposes with chocolate. The 3D movement is made possible thanks to a moving belt, the rest of the depositor stays the same as the MINOS 2D.

Depositing onto plates

MINOS 9 One Shot depositor with 2-D movement MINOS 9 is a One shot depositor for the production of centre filled chocolate products. It is very compact, very versatile, easy understood, easy to operate, and that it meets high hygienic standards. On top of that it comes with a competitive price, using top quality components. The MINOS-9 offers a unique flexibility for the small chocolatier. Next to traditional one shot depositing into moulds, it is perfectly suited for one shot depositing directly onto a plate. TWIN depositing offers the possibility to make double layer products into moulds or to deposit a soft cream directly onto a disc onto a plate. Imagine what products you can make with this, and what time you will be saving making them !

The touch screen interface has a new version of the Hacos CHOCOCAD software, which enables you to make designs in a very easy way, using the depositor screen or even an external PC.

Decorating nozzle

Examples of products

Option: MINOS line with cooling tower

One shot depositing Although it can be used for all kinds of depositing jobs, the MINOS is first of all a one shot depositor. It will deposit chocolate and filling at the same time into a mould, enabling to produce a cream filled chocolate product in one stroke. The chocolate and filling, which are fed into a separated double jacketed hopper, are led to special double nozzles which deposit the specific quantity at the desired time. The chocolate will form the outer layer, the filling will be the interior. Though one-shot is normally only applied in moulds, the MINOS can also make a one-shot product type “manon” directly onto flat surfaces.

2-D movement The depositing head moves up and down while depositing. Thanks to its smart programming, the depositor can also be used to make a 2-directional movement. This is achieved through a combination of the vertical movement of the depositing head and the horizontal movement of the belt. Because the depositing head and the transport belt are both servo engine driven, the “MINOS” really becomes an artist. The passionate chocolatier in you will love the hand-made-look results !

Depositing into moulds

Standard equipment

GENERAL 2x9 pistons Quick-change one shot plate, tailor made 1 depositing plate one shot Servo motor technology Wheels under frame CE-approved HEATING Two water heated hoppers MOVEMENTS Vertical movement of depositing head 410 mm belt with emergency press table, length of 1,8 meter, with 2D programming COMMAND PANEL 12" Touch screen panel

Technical specifications • Frame: stainless steel • Wheels under frame • Safety cover with security switches • Electricity: 3 phase - 400 Volt + neutral, 50 Hz

(other on request) • Compressed air must be available: 50 l/min at 6 BAR

(air compressor not included) • Mould size: 275 x 135, 275 x 175 or 275 x 205 mm

(other on request) • One one-shot depositing plate with maximum 9 one shot

nozzles is standard. Other one shot depositing plates and normal depositing plates are optional

• Row per row operation • Diameter of pistons: 16 mm, center distance between

pistons: 36 mm • Maximum diameter of the canals: 12 mm • Maximum depositing volume: 15 gram of chocolate and 15

gram of filling • Maximum speed (depending on the type of chocolate and

cream): • One shot operation: 15 deposits per minute • Normal cream depositing operation: 20 deposits per minute • Working direction: from left to right

• Dimensions: o Width: 1100 mm (1800 when the

standard belt is mounted) o Depth: 800 mm (880 when the

standard belt is mounted) o Working height: 950 mm o Total height (=filling height)

1450mm o Belt: 1800 mm long x 410 mm wide

(accepts standard 400x600 baking plates)

• Solid particles only allowed in normal single or TWIN depositing modus:

o Maximum diameter of solid pieces: 3 mm (single depositing) or 1 mm (one shot depositing)

o Maximum 25 % of solid pieces allowed in mass

Also available as single depositor: MIDRES-9:

• Dosing into moulds: pralines, chocolate tablets, bars, hollow figures …

• Depositing onto plates: medallions, mendiants, … • Piping onto plates: truffles, manons, … • Decorating onto pralines, petits fours, … • Filling into cups, truffle balls, … • Depositing onto baking plates: macarons, …

MIDRES-9 2D

One Shot depositing plate Twin depositing plate Single depositing plate Hopper with cover