MICRO, SMALL & MEDIUM ENTERPRISES~~. ~ 1{Ci ~ ~

1fT«f ~GOVERNMENT OF INDIA. .

~~, ~ ~ ltem~~MINISTRY OF MICRO, SMALL & MEDIUM ENTERPRISES

IIISIIIE

•

MSME Testing Centre, New Delhi under the Ministry of MSME, Government of India, provides Testing andCalibration facilities to Micro,Small, Medium and Large scale Enterprises with four sectional laboratories under itsauspices namely Electrical, Mechanical, Chemical and Metallurgy, This Centre covers the whole Northern Regioni.e. the States of Haryana, Himachal Pradesh, Jammu & Kashmir, Punjab, Uttar Pradesh, Uttrakhand, Rajasthan,Delhi & NCR and the Union Territory of Chandigarh.

We at MSME-TC, New Delhi believe that our varied experience coupled with the latest technology, helps us ingiving the best testing and calibration results. It is not just skill that matters, but our commitment towards the publicservice essentially differentiates us from the rest. We are committed towards making MSMEs globally competitiveand sustainable. MSME Testing New Delhi being Government of India Organization is significantly contributing invarious initiative like Make in India, Zero Defect Zero Effect.ACCREDITATION AND RECOGNITION:MSME Testing Centre (NR) is recognized by Bureau of Indian Standard (BIS) under Lab Recognition Scheme.MSME Testing Centre New Delhi is also accredited with National Accreditation Board of Testing and CalibrationLaboratories (NABL) as per requirement of ISO/IEC17025:2005 in Calibration and Testing.OUR MISSION:SME TESTING CENTRE New Delhi is committed to achieve excellence in the field of testing and calibrationservices to its customers through good professional practices by involving all personnel well versed with qualitydocuments/procedures and by continual improvement in effectiveness of documented management system as perspecific requirements of international standard ISO/I EC: 17025 , as well as meeting the requirement of statutoryand regulatory authorities.CLIENT BASE:Our client base includes various MSME in the Electrical, Chemical, Mechanical and Metallurgical industries,Government organizations and research institutes, Defence Institutions, BIS, PSUs. Some of them are as under:-

CLIENTELE

4. NOMC 11. OSMC 18. CBSE 25. RAIL COACH FACTORY

8. ElL 22. OHBVNL1. CPWO 15. OOA

23. PPDC, MEERUT2. EOMC 9. RITES 16. CSO

3. SOMC 10. RINl 17. BIS 24. NOIDA AUTHORITY

5. NBCC 12. UHBVNl 19. SAil 26. SBI, PNB, UNION BANK

6. HSCC 13. OSIIOC 20. ROSO 27. INDIAN RAILWAY VIGILANCE

7. GAil 14. BHEl 21. CEl 28. AIRPORT AUTHORITY OF INDIA (L)

OUR OBJECTIVES:Public service is the TOP PRIORITY in our working. The interaction with the customers is established byunderstanding the client's testing / calibration requirements through technical discussions, examining the scopeand facilities available with this Centre

Our main objectives are :-a. To provide testing facilities to enable MSME's to produce in conformance to various IS Specificationsb. Ensure on time delivery of Test / Calibration Reports.c. To coordinate with Bureau of Indian Standards (BIS) and other technical testing / inspection organizations in

matters relating to formation of standards including standardization of products in MSME's Sector.Provide training to entrepreneurs as support fortheir capability enhancement.

PROCEDU~E:The customers intending to avail of the Testing /Calibration facilities available, are required to approach this Centrewith the details about their Testing / Calibration requirements. On receipt of the request from the clients, desiredquantity of samples, necessary testing charges and time required to complete the job are informed to the client.

.

MECHANICAL LABORATORY

Product Testing Facilities:• LPGGas Stove Testing• LPGWater Heater Testing• Domestic Pressure Cooker Testing• Butt Hinge, Piano Hinges• Fire Fighting equipment (Fire Extinguishers, Fire

Hydrant components etc.)• Possible Dimensions/Hydraulic Pressure Testing of

pipes and other products on special requirement

• Water Taps• Non-Stick Cooking Wares• Storage Water Tanks• Flushing Cisterns

Calibration Facilities:• Vernier Caliper• Micrometers• Dial Gauges• Linear Scales/ glass scale• Thread Gauges• Height Gauges• Measuring Tape• Depth Gauges• Slip Gauges• Feeler Gauges

• Radius Gauges• Pitch Gauges• Digital/Dial Pressure

gauges/Transducers• Load Gauges• Angle protractors• Try Square• Dial Gauge Calibrator• Surface roughness• Dial Bore Gauge• Plain Plug & Ring Gauges

• Surface Plates• Spirit Levels• Dead Weight Tester• V Blocks• Angle Plates• Sieves• Glass Scales• Ford Cups• Angle Gauge Blocks• Caliper checkers

CHEMICAL LABORATORYProduct Testing Facilities :

• Ferrousand Non FerrousMetals • Cement/Mortar• Minerals & Ores • Bricks & Tiles• Paints • Wooden Door & Shutters• Varnishes and Enamels • Particle Board• Paper & Paper products • Organic/Inorganic Chemicals• Miscellaneous items Brushes • Glass Mirror• Cosmetics • Shoe Polish

• Bitumen & Bitumen based products• Soaps• Detergents• Plastics• Water for construction• Corrosion test (Salt spray)

METALLURGY LABORATORYTesting Facilities:

The Metallurgical Laboratory provides Testing and Calibration facilities and is equipped with modern &sophisticated equipments like Universal Testing Machines, Tensile Testing Machine, Digital and AnalogHardness Testing Machines, Load Cells, Impact Testing Machine, Torsion Testing Machine, Compression TestingMachine, etc.

Physical Testing :• Tensile• Bend• Re-Bend• Hardness (RB, RC,HB, HV)• TorsionProduct Testing :• HSD Bars,• Structural Engineering Products:

Round, Angles, Flat, Channel,Sheets, Sections.MSTubes and Tubular products,PVCand steel conduit pipes

Calibration Facilities:• Proving Rings• Load Cell

• Flattening• Drift• Load• Impact• Pipe Bending

• Wires and Barbed wires,• Grey Iron graded castings,• c.I. Manhole Covers,• Pre-cast concrete manhole

covers and frames,

• Load & Deflection• Compression• Transverse• Wrapping etc

• Wrought aluminium,• Utensils,• Coil spring of small sizes,• Rubber,• Laminated Sheets

ELECTRICAL LABORATORYluting Facilities:

Test facilities available as per IS, lEe and other International StandardsAnd also as required for star rating tests as per ~EE requirements

Domestic Electrical Appliances :-Electrical Food Mixer & Grinder (IS: 4250), Electric Iron (IS: 366),Instantaneous and Storage Type Electric Water Heaters (IS: 8978 &IS: 2082), Mineral Filled Sheathed Heating Element (IS: 4159), ElectricImmersion Water Heater (IS:368), Single Phase Small AC andUniversal Electric Motor (IS:996), Pump Set for Desert Cooler(IS:11951), Heat Radiator (IS:369), Hot Air Fan (IS:4283), ElectricCeiling Fans (IS: 374), Table Fans (IS: 555), Ventilating fans (IS: 2312),Pedestal Fans (IS: 1169), Electronic Fan Regulators (IS: 11037),Induction Cooker, etc.

Other Information :-Testing is also done according to other National & International Standards viz. IEC, DGS&D etc. or as permanufacturer specification/request with condition to availability of test facilities.

Units, Fuse Wires, Telecommunication Cables (IS: 13176), Automotive Cables (IS: 2465), Luminaries(IS: 10322-Pt. 1 to 5), Electronic Ballast (IS: 13021-1 & 2), Ballast for HPSVLamps (IS: 6616), SV& MVLamps (IS: 9974 & 9900), LEDLuminaries (IS: 16101) etc.

Electrical wiring accessories:-Domestic switches (IS: 3854), Three Pin plugs & socket outlets (IS:1293), Ceiling Roses (IS: 371), Lamp Holders (IS: 1258), Metal CladSwitches/Control PanelS/Distribution Boxes (IS/IEC: 60947), MCB (IS:8828), IP test, etc.

Wires & Cables :-PVC insulated & sheathed armoured & un-armoured wires & cables(IS: 694 & IS: 1554-1), XLPE insulated & PVC sheathed armouredcables (IS: 7098-1), Elastomeric insulated cables (IS: 9968), Overhead conductors (IS: 398), Welding Cables(IS: 9857), FRLSH Cables (Cat. C1), etc.

Partial Tests:IP Tests (up to IP-67) for Luminaries & Control Panels (IS/IEC), MetalClad Switches/Control Panels/Distribution Boxes(IS/IEC:60947), MCB (IS: 8828), Electronic Fan Regulators (IS:11037), Safety Test of Electric Stem Iron (IS: 302), Washing Machines(IS: 14155), Hot Plates (IS: 365), Cooking Ovens (IS: 5790), ElectricKettles (IS: 367), Electric Toasters (IS: 1287), Flash Light (IS: 2083),Invertors, UPS, Voltage Stabilizers (IS: 9815), Bells & Buzzers(IS:2268), Medical Equipments (IEC: 60601), Submersible WaterPump, Domestic Flour Mill, Induction Cooker, Rewireable type Fuses(IS: 2086), HRC Fuses.

Lamps & Luminaries :-LED Lamps as per IS: 16102-Pt.1

T "" F llltlIn order to improve the skills of testing personnel from Micro, Small &Medium Enterprises and other organizations, the following two types

of training are imparted:-Four months training courses to the Science/Engineering Graduates and Diploma Holders in Electrical,Chemical, Mechanical and Metallurgical Engineering in the field of testing of Electrical, Chemical,Mechanical, Metallurgical Products and Calibrations.

Two weeks specialized training in the field of testing of Electrical, Chemical, Mechanical, MetallurgicalProducts and Calibrations.

For further information, please Contact :-Director: 26314416,HOD, Electrical Lab,HOD, Chemical Lab,HOD, Mechanical Lab,HOD, Metallurgy Lab,

Email: dctc-nr@dcmsme.gov.inEmail: electdiv.msmetcdelhi@gmail.comEmail: dk4p@yahoo.co.inEmail: rahul.bhardwaj@dcmsme.gov.inEmail: msmetcmet@gmail.com

•••••Phone No. 011-26312587,49097946,011-26312671Fax: 011-26847973, E-mail: dctc-nr@dcmsme.gov.in

Second Price WinnerSwachhatha, 2017

Frist Price WinnerSwachhatha, 2018

MSME Testing Centre(NABL ACCREDITED & BIS RECOGNISED LAB)

Shaheed Capt. Gaur Marg, (Opp. Modi Flour Mill) Okhla, New Delhi -110 020Website: www.msme-tc-nr.gov.in

1115111ii:MICRO, SMAll & MEDIUM ENTERPRISES

~~. 0IlJ ~ - ;rn>!

1fRd' mcJ)RGOVERNMENT OF INDIA. .

~a:q, ~ ~ llUfll \ffi+J ~MINISTRY OF MICRO, SMALL & MEDIUM ENTERPRISES