MINI CONVERTIBLE. OWNER'S MANUAL. · help protect the environment. "..." Control Display texts used to select individual functions. Action steps Action steps to be carried out are

OWNER'S MANUAL.MINI CONVERTIBLE.

LINK:CONTENT & A-Z

Online Edition for Part no. 01405A02757 - II/20


WELCOME TO MINI.

OWNER'S MANUAL.MINI CONVERTIBLE.

Thank you for choosing a MINI.The more familiar you are with your vehicle, the better control you will haveon the road. We therefore strongly suggest:Read this Owner's Manual before starting off in your new MINI. It containsimportant information on vehicle operation that will help you make full use ofthe technical features available in your MINI. The manual also containsinformation designed to enhance operating reliability and road safety, and tocontribute to maintaining the value of your MINI.Any updates made after the editorial deadline can be found in the appendix ofthe printed Owner's Manual for the vehicle.Get started now. We wish you driving fun and inspiration with your MINI.

3Online Edition for Part no. 01405A02757 - II/20

TABLE OF CONTENTS

NOTESInformation.............................................................................................................................. 8

QUICK REFERENCEEntering.................................................................................................................................. 16

Set-up and use.......................................................................................................................20

On the road............................................................................................................................ 23

AT A GLANCECockpit.................................................................................................................................... 32

Central Information Display (CID)..................................................................................36

General settings................................................................................................................... 42

Owner's Manual media.......................................................................................................51

CONTROLSOpening and closing........................................................................................................... 52

Seats, mirrors, and steering wheel.................................................................................72

Transporting children safely............................................................................................ 82

Driving.................................................................................................................................... 86

Displays................................................................................................................................ 109

Lights.................................................................................................................................... 126

Safety.....................................................................................................................................132

Driving stability control systems.................................................................................153

Driving comfort................................................................................................................. 158

Climate control...................................................................................................................178

Interior equipment............................................................................................................187

Storage compartments.....................................................................................................195

Cargo area............................................................................................................................198


DRIVING TIPSThings to remember when driving.............................................................................. 204

Reducing fuel consumption........................................................................................... 209

ENTERTAINMENTGeneral information......................................................................................................... 216

Tone.......................................................................................................................................218

Radio..................................................................................................................................... 220

Audio.....................................................................................................................................228

COMMUNICATIONTelephone............................................................................................................................ 232

MINI Connected................................................................................................................ 236

MOBILITYRefueling..............................................................................................................................240

Fuel........................................................................................................................................242

Wheels and tires................................................................................................................244

Engine compartment........................................................................................................265

Engine oil.............................................................................................................................268

Coolant..................................................................................................................................272

Maintenance....................................................................................................................... 274

Replacing components.................................................................................................... 276

Breakdown assistance..................................................................................................... 285

Care........................................................................................................................................293

REFERENCETechnical data.................................................................................................................... 298

Appendix..............................................................................................................................301

License Texts and Certifications..................................................................................302

Everything from A to Z....................................................................................................310


© 2020 Bayerische Motoren WerkeAktiengesellschaftMunich, GermanyReprinting, including excerpts, only with the written consent of BMW AG, Munich.US English ID5 II/20, 03 20 490Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.



Information

Using this Owner's Manual

OrientationThe fastest way to find information on aparticular topic is by using the index.

An initial overview of the vehicle is pro-vided in the first chapter.

Updates made after the editorialdeadlineDue to updates after the editorial deadline,differences may exist between the printedOwner's Manual and the Integrated Owner'sManual in the vehicle.

Notes on updates can be found in the ap-pendix of the printed Owner's Manual forthe vehicle.

Additional sources of informa-tion

Service centerA service center will be glad to answerquestions at any time.

InternetVehicle information and general informa-tion on MINI, e.g., on technology, are availa-ble on the Internet: www.miniusa.com.

MINI Motorer’s Guide appThe Owner's Manual is available in manycountries as an app for iOS or Android inthe respective Store.

MINI Motorer’s Guide WebDriver’s Guide Web shows the most suita-ble information for the selected vehicle. Ifpossible, only equipment and functions thatare actually installed in the vehicle will beexplained. Driver’s Guide Web can be dis-played in any current browser.

Symbols and displays

Symbols in the Owner's Manual

Sym-bol

Meaning

Precautions that must befollowed in order to avoid thepossibility of injury to yourselfand to others as well as seriousdamage to the vehicle.

Measures that can be taken tohelp protect the environment.

"..." Control Display texts used toselect individual functions.

Action stepsAction steps to be carried out are presentedas a numbered list. The steps must be car-ried out in the defined order.

1. First action step.

2. Second action step.

EnumerationsEnumerations without mandatory order oralternative possibilities are presented as alist with bullet points.

– First possibility.

Seite 8

NOTES Information


– Second possibility.

Symbols on vehicle components This symbol on a vehicle component

indicates that further information on thecomponent is available in the Owner'sManual.

Vehicle features and options

This Owner's Manual describes all modelsand all standard, country-specific and op-tional equipment that is offered in themodel series. Therefore, this Owner'sManual also describes and illustrates fea-tures and functions that are not available ina vehicle, for example because of the se-lected optional features or the country-spe-cific version.

This also applies to safety-related functionsand systems.

When using these functions and systems,the applicable laws and regulations must beobserved.

For any options and equipment not descri-bed in this Owner's Manual, refer to theSupplementary Owner's Manuals.

Your dealer’s service center is happy to an-swer any questions that you may haveabout the features and options applicable toyour vehicle.

Status of the Owner's Manual

Basic informationThe manufacturer of your vehicle pursues apolicy of constant development that is con-ceived to ensure that our vehicles continueto embody the highest quality and safetystandards. In rare cases, therefore, the fea-

tures described in this Owner's Manual maydiffer from those in your vehicle.

Updates made after the editorialdeadlineDue to updates after the editorial deadline,differences may exist between the printedOwner's Manual and the Integrated Owner'sManual in the vehicle.

Notes on updates can be found in the ap-pendix of the printed Owner's Manual forthe vehicle.

For Your Own Safety

ManufacturerThe manufacturer of this MINI is Bayeri-sche Motoren Werke Aktionengesellschaft,BMW AG.

Intended useHeed the following when using the vehicle:

– Owner's Manual.

– Information on the vehicle. Do not re-move stickers.

– Technical vehicle data.

– The traffic, speed, and safety laws wherethe vehicle is driven.

– Vehicle documents and statutory docu-ments.

WarrantyYour vehicle is technically configured forthe operating conditions and registrationrequirements applying in the country offirst delivery, also known as homologation.If your vehicle is to be operated in a differ-ent country it might be necessary to adaptyour vehicle to potentially differing operat-ing conditions and registration require-ments. If your vehicle does not comply with

Seite 9

Information NOTES


the homologation requirements in a certaincountry you may not be able to lodge war-ranty claims for your vehicle there. Furtherinformation on warranty is available from aservice center.

Maintenance and repairsAdvanced technology, for instance the useof modern materials and high-performanceelectronics, requires suitable maintenanceand repair work.

The manufacturer of your vehicle recom-mends that you entrust corresponding pro-cedures to a MINI dealer’s service center. Ifyou choose to use another service facility,the manufacturer of your vehicle recom-mends use of a facility that performs work,e.g., maintenance and repair, according toMINI specifications with properly trainedpersonnel, referred to in the Owner'sManual as "another qualified service centeror repair shop".

If work is performed improperly, for in-stance maintenance and repair, there is arisk of subsequent damage and relatedsafety risks.

Improperly performed work on the vehiclepaint can lead to a failure or malfunction ofcomponents, e.g., the radar sensors, andthereby result in a safety risk.

Parts and accessoriesThe manufacturer of your vehicle recom-mends the use of parts and accessory prod-ucts approved by the manufacturer of theMINI.

Approved parts and accessories, and adviceon their use and installation are availablefrom a MINI dealer's service center.

MINI parts and accessories were tested bythe manufacturer of the MINI for theirsafety and suitability in MINI vehicles.

The manufacturer of your vehicle warrantsgenuine MINI parts and accessories.

The manufacturer of your vehicle does notevaluate whether each individual productfrom another manufacturer can be usedwith MINI vehicles without presenting asafety hazard, even if a country-specific of-ficial approval was issued. The manufac-turer of your vehicle does not evaluatewhether these products are suitable forMINI vehicles under all usage conditions.

California Proposition 65 WarningFor vehicles sold in California, the law re-quires vehicle manufacturers to provide thefollowing warning:

Warning

Engine exhaust and a wide variety of Au-tomobile components and parts, includingcomponents found in the interior furnish-ings in a vehicle, contain or emit chemi-cals known to the State of California tocause cancer and birth defects and repro-ductive harm. In addition, certain fluidscontained in vehicles and certain productsof component wear contain or emit chemi-cals known to the State of California tocause cancer and birth defects or other re-productive harm. Battery posts, terminalsand related accessories contain lead andlead compounds. Batteries also containother chemicals known to the State of Cali-fornia to cause cancer. Wash your handsafter handling. Used engine oil containschemicals that have caused cancer in labo-ratory animals. Always protect your skinby washing thoroughly with soap and wa-ter. For more information go towww.P65Warnings.ca.gov/passenger-ve-hicle.

Seite 10

NOTES Information


Warning

Operating, servicing and maintaining apassenger vehicle or off-highway motorvehicle can expose you to chemicals in-cluding engine exhaust, carbon monoxide,phthalates, and lead, which are known tothe State of California to cause cancer andbirth defects or other reproductive harm.To minimize exposure, avoid breathing ex-haust, do not idle the engine except asnecessary, service your vehicle in a well-ventilated area and wear gloves or washyour hands frequently when servicingyour vehicle. For more information go towww.P65Warnings.ca.gov/passenger-ve-hicle.

Service and warrantyWe recommend that you read this publica-tion thoroughly. Your vehicle is covered bythe following warranties:

– New Vehicle Limited Warranty.

– Rust Perforation Limited Warranty.

– Federal Emissions System Defect War-ranty.

– Federal Emissions Performance War-ranty.

– California Emission Control System Lim-ited Warranty.

Detailed information about these warrantiesis listed in the Service and Warranty Infor-mation Booklet for US models or in the War-ranty and Service Guide Booklet for Cana-dian models.

Your vehicle has been specifically adaptedand designed to meet the particular operat-ing conditions and homologation require-ments in your country and continental re-gion in order to deliver the full drivingpleasure while the vehicle is operated underthose conditions. If you wish to operateyour vehicle in another country or region,

you may be required to adapt your vehicleto meet different prevailing operating con-ditions and homologation requirements.You should also be aware of any applicablewarranty limitations or exclusions for suchcountry or region. In such case, please con-tact Customer Relations for further informa-tion.

MaintenanceMaintain the vehicle regularly to sustainthe road safety, operational reliability andthe New Vehicle Limited Warranty.

Specifications for maintenance measures:

– MINI Maintenance system.

– Service and Warranty Information Book-let for US models.

– Warranty and Service Guide Booklet forCanadian models.

If the vehicle is not maintained or is im-properly maintained, this could result in se-rious damage to the vehicle. Such damage isnot covered by the MINI New Vehicle Lim-ited Warranty.

Refer to chapter engine oil change regard-ing recommended service intervals for oilchanges.

Data memory

General informationElectronic control devices are installed inthe vehicle. Electronic control units processdata they receive from vehicle sensors, self-generate or exchange with each other. Somecontrol units are necessary for the vehicleto function safely or provide assistance dur-ing driving, for instance driver assistancesystems. Furthermore, control units facili-tate comfort or infotainment functions.

Information about stored or exchanged datacan be requested from the manufacturer of

Seite 11

Information NOTES


the vehicle, in a separate booklet, for exam-ple.

Personal referenceEach vehicle is marked with a unique vehi-cle identification number. Depending on thecountry, the vehicle owner can be identifiedwith the vehicle identification number, li-cense plate and corresponding authorities.In addition, there are other options to trackdata collected in the vehicle to the driver orvehicle owner, for instance via utilizedservices.

Operating data in the vehicleControl units process data to operate the ve-hicle.

For example, this includes:

– Status messages for the vehicle and itsindividual components, e.g., wheel rota-tional speed, wheel speed, deceleration,transverse acceleration, engaged safetybelt indicator.

– Ambient conditions, e.g., temperature,rain sensor signals.

The processed data is only processed in thevehicle itself and generally volatile. Thedata is not stored beyond the operating pe-riod.

Electronic components, e.g. control unitsand ignition keys, contain components forstoring technical information. Informationabout the vehicle condition, component us-age, maintenance requirements events orfaults can be stored temporarily or perma-nently.

This information generally records the stateof a component, a module, a system, or theenvironment, for instance:

– Operating states of system components,for instance, fill levels, tire inflationpressure, battery status.

– Malfunctions and faults in importantsystem components, for instance lightsand brakes.

– Responses by the vehicle to special sit-uations such as airbag deployment orengagement of the driving stability con-trol systems.

– Information on vehicle-damagingevents.

The data is required to perform the controlunit functions. Furthermore, it also servesto recognize and correct malfunctions, andhelps the vehicle manufacturer to optimizevehicle functions.

The majority of this data is volatile and isonly processed within the vehicle itself.Only a small share of the data is storedevent-related in event or fault memories.

When servicing, for instance during repairs,service processes, warranty cases, and qual-ity assurance measures, this technical infor-mation can be read out from the vehicle to-gether with the vehicle identificationnumber.

A dealer’s service center or another quali-fied service center or repair shop can readout the information. The socket for OBD On-board Diagnosis required by law in the ve-hicle is used to read out the data.

The data is collected, processed, and usedby the relevant organizations in the servicenetwork. The data documents technical con-ditions of the vehicle, helps with the identi-fication of the fault, compliance with war-ranty obligations and quality improvement.

Furthermore, the manufacturer has productmonitoring duties to meet in line with prod-uct liability law. To fulfill these duties, thevehicle manufacturer needs technical datafrom the vehicle. The data from the vehiclecan also be used to check customer claimsfor warranty and guaranty.

Fault and event memories in the vehicle canbe reset when a dealer’s service center or

Seite 12

NOTES Information


another qualified service center or repairshop performs repair or servicing work.

Data entry and data transfer intothe vehicle

General informationDepending on the vehicle equipment, com-fort and individual settings can be stored inthe vehicle and modified or reset at anytime.

For example, this includes:

– Settings for the seat and steering wheelpositions.

– Suspension and climate control settings.

If necessary, data can be transferred to theentertainment and communication systemof the vehicle, for instance via smartphone.

This includes the following depending onthe respective equipment:

– Multimedia data such as music, films orphotos for playback in an integratedmultimedia system.

– Address book data for use in conjunc-tion with an integrated hands-free sys-tem or an integrated navigation system.

– Entered navigation destinations.

– Data on the use of Internet services.

This data can be stored locally in the vehicleor is found on a device that has been con-nected to the vehicle, e.g., a smartphone,USB stick or MP3 player. If this data isstored in the vehicle, it can be deleted atany time.

This data is only transmitted to third partiesupon personal request as part of the use ofonline services. The transmission dependson the selected settings for the use of theservices.

Incorporation of mobile devicesDepending on the vehicle equipment, mo-bile devices connected to the vehicle, for in-stance smartphones, can be controlled viathe vehicle control elements.

The sound and picture from the mobile de-vice can be played back and displayedthrough the multimedia system. Certain in-formation is transferred to the mobile de-vice at the same time. Depending on thetype of incorporation, this includes, for in-stance position data and other general vehi-cle information. This optimizes the way inwhich selected apps, for instance navigationor music playback, work.

There is no further interaction between themobile device and the vehicle, such as ac-tive access to vehicle data.

How the data will be processed further isdetermined by the provider of the particularapp being used. The extent of the possiblesettings depends on the respective app andthe operating system of the mobile device.

Services

General informationIf the vehicle has a wireless network con-nection, this enables data to be exchangedbetween the vehicle and other systems. Thewireless network connection is realized viaan in-vehicle transmitter and receiver unitor via personal mobile devices brought intothe vehicle, for instance smartphones. Thiswireless network connection enables 'onlinefunctions' to be used. These include onlineservices and apps supplied by the vehiclemanufacturer or by other providers.

Services from the vehiclemanufacturerWhere online services from the vehiclemanufacturer are concerned, the corre-sponding functions are described in the ap-

Seite 13

Information NOTES


propriate place, for instance the Owner'sManual or manufacturer's website. The rele-vant legal information pertaining to dataprotection is provided there too. Personaldata may be used to perform online serv-ices. Data is exchanged over a secure con-nection, for instance with the IT systems ofthe vehicle manufacturer intended for thispurpose.

Any collection, processing, and use of per-sonal data above and beyond that needed toprovide the services must always be basedon a legal permission, contractual arrange-ment or consent. It is also possible to acti-vate or deactivate the data connection as awhole. That is, with the exception of func-tions and services required by law such asAssist systems.

Services from other providersWhen using online services from other pro-viders, these services are the responsibilityof the relevant provider and subject to theirdata privacy conditions and terms of use.The vehicle manufacturer has no influenceon the content exchanged during this proc-ess. Information on the way in which per-sonal data is collected and used in relationto services from third parties, the scope ofsuch data, and its purpose, can be obtainedfrom the relevant service provider.

Event Data Recorder EDR

This vehicle is equipped with an event datarecorder EDR. The main purpose of an EDRis to record, in certain crash or near crash-like situations, such as an air bag deploy-ment or hitting a road obstacle, data thatwill assist in understanding how a vehicle’ssystems performed. The EDR is designed torecord data related to vehicle dynamics andsafety systems for a short period of time,typically 30 seconds or less.

The EDR in this vehicle is designed to re-cord such data as:

– How various systems in your vehiclewere operating.

– Whether or not the driver and passen-ger safety belts were fastened.

– How far, if at all, the driver was depress-ing the accelerator and/or brake pedal.

– How fast the vehicle was traveling.

This data can help provide a better under-standing of the circumstances in whichcrashes and injuries occur.

EDR data is recorded by your vehicle only ifa nontrivial crash situation occurs; no datais recorded by the EDR under normal driv-ing conditions and no personal data, for in-stance name, gender, age, and crash loca-tion, are recorded.

However, other parties, such as law enforce-ment, could combine the EDR data with thetype of personally identifying data routinelyacquired during a crash investigation.

To read data recorded by an EDR, specialequipment is required, and access to the ve-hicle or the EDR is needed. In addition tothe vehicle manufacturer, other parties,such as law enforcement, that have the spe-cial equipment, can read the information ifthey have access to the vehicle or the EDR.

Seite 14

NOTES Information


Vehicle identification number

Engine compartment

The vehicle identification number can befound in the engine compartment, on theright-hand side of the vehicle.

Windshield

The vehicle identification number can alsobe found behind the windshield.

Reporting safety defects

For US customersThe following only applies to vehiclesowned and operated in the US.

If you believe that your vehicle has a defectwhich could cause a crash or could cause in-jury or death, you should immediately in-form the National Highway Traffic SafetyAdministration NHTSA, in addition to noti-fying MINI of North America, LLC, P.O. Box

1227, Westwood, New Jersey 07675-1227,Telephone 1-800-831-1117.

If NHTSA receives similar complaints, itmay open an investigation, and if it findsthat a safety defect exists in a group of ve-hicles, it may order a recall and remedycampaign.

However, NHTSA cannot become involvedin individual problems between you, yourdealer, or MINI of North America, LLC.

To contact NHTSA, you may call the VehicleSafety Hotline toll-free at 1-888-327-4236(TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administra-tor, NHTSA, 1200 New Jersey Avenue, SE.,Washington, DC 20590. You can also obtainother information about motor vehiclesafety from http://www.safercar.gov

For Canadian customersCanadian customers who wish to report asafety-related defect to Transport Canada,Defect Investigations and Recalls, may callthe toll-free hotline 1-800-333-0510. Youcan also obtain other information about mo-tor vehicle safety from http://www.tc.gc.ca/roadsafety.

Seite 15

Information NOTES


Entering

Opening and closing

Buttons on the vehicle key

1 Unlocking

2 Locking

3 Unlocking the trunk lid

4 Panic mode

Unlocking the vehiclePress the button on the vehicle key.

Depending on the settings, either only thedriver's door or all vehicle access points areunlocked.

If only the driver's door is unlocked, pressthe button on the vehicle key again to un-lock the other vehicle access points.

Press and hold the button on the ve-hicle key after unlocking.

The windows and the sliding sun roofintegrated into the convertible top areopened, as long as the button on the vehiclekey is pressed.

With Comfort Access:

If close to the vehicle, the convertible topcan also be opened.

Press the button on the vehicle keyagain after the sliding sun roofintegrated into the convertible top

is fully opened. Press and hold the buttonuntil the convertible top is fully opened andlocked.

Releasing the button or leaving the vicinityof the vehicle stops the motion.

Locking the vehiclePress the button on the vehicle key.

All vehicle access points are locked.

When the vehicle key is used near the vehi-cle, it can be used to close the convertibletop and windows.

Hold down the button on the vehi-cle key until closing is completed.

Releasing the button or leaving the vicinityof the vehicle stops the motion.

Buttons for the central lockingsystem

Overview

Buttons for the central locking system.

Seite 16

QUICK REFERENCE Entering


Locking

Pressing the button locks the vehi-cle if the front doors are closed.

Unlocking

Pressing the button unlocks the ve-hicle.

Panic modeYou can trigger the alarm system if you findyourself in a dangerous situation.

Press the button on the vehicle keyand hold for at least 3 seconds.

To switch off the alarm: press any button.

Comfort Access

ConceptThe vehicle can be accessed without operat-ing the vehicle key.

Carrying the vehicle key with you, e.g., inyour pants pocket, is sufficient.

The vehicle automatically detects the vehi-cle key when it is in close proximity or inthe car's interior.

Unlocking the vehicle

On the driver's or front passenger's doorhandle, press the button.

Locking the vehicle

On the driver's or front passenger's doorhandle, press the button.

Trunk lid

Unlocking

– Unlock the vehicle and press the buttonon the outside of the trunk lid.

– Press and hold the button on thevehicle key for approx. 1 second.

Depending on the setting, the doors may beunlocked.

ClosingClose the trunk lid manually.

Seite 17

Entering QUICK REFERENCE


Convertible top with integratedsliding sun roof

Overview

Sliding sun roof

Press the switch backward,until the desired position isreached or the sliding sun roofis fully open.

Press the switch forward, untilthe desired position is reachedor the sliding sun roof isclosed.

Convertible top

Press the switch backward,until the sliding sun roof isopen.

Press the switch backwardagain. The windows are rolled

down, and the convertible top opens aslongs as the switch is pressed. After theconvertible top is completely open, theswitch can be held or pressed again brieflyin order to raise the windows.

Press and hold switch forward.The windows are lowered, theconvertible top closes and thewindows are raised again aslong as the switch is pressed.

Displays and control elements

In the vicinity of the steeringwheel

1 Low beams, fog lights

2 High beams, headlight flasher, turn sig-nal

3 Instrument cluster

4 Wiper system

Indicator/warning lights

Instrument clusterThe indicator/warning lights can light up ina variety of combinations and colors.

Several of the lights are checked for properfunctioning and light up temporarily whenthe engine is started or the ignition isswitched on.

Seite 18

QUICK REFERENCE Entering


Driver's door

1 All side windows

2 Power windows

3 Exterior mirrors

All around the selector lever

1 Selector lever

2 Controller with buttons

3 Parking brake

Central Information Display (CID)

ConceptThe Central Information Display (CID) com-bines the functions of a multitude ofswitches. These functions can be operatedvia the Controller.

Buttons on the Controller

Button Function

Press once: calls up the mainmenu.

Press twice: open recently usedmenus.

Opens the previous display.

Opens the Options menu.

Open the Audio menu.

Opens the Phone menu.

Seite 19

Entering QUICK REFERENCE


Set-up and use

Seats, mirrors, and steeringwheel

Manually adjustable seats

1 Forward/backward

2 Thigh support

3 Height

4 Backrest tilt

Adjusting the head restraint

Height

– To raise: push the head restraint up.

– To lower: press the button, arrow 1, andpush the head restraint down.

Adjusting the exterior mirrors

1 Adjusting

2 Selecting a mirror, Automatic Curb Mon-itor

3 Folding in and out

Adjusting the steering wheel

In four directions

1. Fold the lever down.

2. Move the steering wheel to the prefer-red height and angle to suit your seatingposition.

3. Fold the lever back up.

Seite 20

QUICK REFERENCE Set-up and use


Entering the rear1. Pull lever up to the stop.

2. Fold backrest forward.

3. Push the seat forward.

Original position1. Push the seat back into the original po-

sition.

2. Fold back the backrest to lock the seat.

Infotainment

Radio

Control elements

1 Changing the waveband

2 Changing the entertainment source

3 Sound output on/off, volume

4 Changing the station/track

5 Programmable memory buttons

Pairing the mobile phoneAfter the mobile phone is paired once withthe vehicle, the mobile phone can be oper-ated using the Central Information Display(CID), the steering wheel buttons and spo-ken instructions.

1. "My MINI"

2. "System settings"

3. "Mobile devices"

4. "Connect new device"

The vehicle's Bluetooth name is dis-played on the Control Display.

5. To perform additional steps on the mo-bile phone, refer to the mobile phoneowner's manual: e.g., search for or con-nect the Bluetooth device or a new de-vice.

The Bluetooth name of the vehicle ap-pears on the mobile phone display. Se-lect the Bluetooth name of the vehicle.

6. Depending on the mobile device, a con-trol number is displayed or the controlnumber must be entered.

– Compare the control number dis-played on the Control Display withthe control number on the display ofthe device.

Confirm the control number on thedevice and on the Control Display.

– Enter and confirm the same controlnumber on the device and via theCentral Information Display (CID).

The device is connected and displayedin the device list.

The mobile phone is connected and will ap-pear at the top of the list of mobile phones.

Seite 21

Set-up and use QUICK REFERENCE


Using the phone

Accepting a callIncoming call can be accepted via the Cen-tral Information Display (CID) or the buttonon the steering wheel.

Via the Central Information Display (CID)

"Accept"

Via the button on the steering wheel

Press the button.

Dialing a number1. "Communication"

2. "Dial number"

3. Select the numbers individually.

4. Select the symbol.

Seite 22

QUICK REFERENCE Set-up and use


On the road

Driving

Starting and stopping the engine

Ignition on/off

– On: press the Start/Stopbutton.

Most of the indicator/warning lights light up fora varied length of time.

– Off: press the Start/Stop button again.

All indicator lights go out.

– Radio-ready state: when the ignition isswitched off, press the ON/OFF buttonon the radio or when the engine is run-ning, press the Start/Stop button.

Some electronic systems/power con-sumers remain ready for operation.

Start/stop engine

Steptronic transmission: starting

1. Depress the brake pedal.

2. Engage selector lever position P or N.

3. Press the Start/Stop button.

Manual transmission: starting


2. Press on the clutch pedal and shift toneutral.


Steptronic transmission: switching off

1. When the vehicle is stationary, applythe parking brake.

2. Engage selector lever position P.


Manual transmission: switching off

1. With the vehicle at a standstill, pressthe Start/Stop button.

2. Shift into first gear or reverse.

3. Set the parking brake.

Auto Start/Stop function

Steptronic transmission: switches the en-gine off automatically while stationary tosave fuel. The engine starts automaticallywhen the brake pedal is released.

Manual transmission: switches the engineoff automatically while stationary to savefuel. As soon as the clutch pedal is de-pressed, the engine starts automatically.

Parking brake

ApplyingThe lever automatically engages after beingpulled up.

Releasing

Raise lever slightly, press the button andguide the lever down.

Seite 23

On the road QUICK REFERENCE


Manual transmission

ShiftingWhen shifting into 5th or 6th gear, pushthe gearshift lever to the right in order toprevent inadvertent shifting into the 3rd or4th gear.

Reverse gearSelect only when the vehicle is stationary.

To overcome the resistance push the gear-shift lever dynamically to the left and en-gage reverse gear with a forward shiftingmovement.

Steptronic transmission

Selector lever positionsParking position P.

R is reverse.

Neutral N.

Drive mode D.

Engage selector lever position P or R onlywhen the vehicle is stationary.

To prevent the vehicle from creeping afteryou select a drive mode or reverse, maintainpressure on the brake pedal until you areready to start.

Selector lever lockA lock prevents an inadvertent change fromselector lever position P to another selectorlever position and, depending on the trans-mission version, inadvertent switching toselector lever position P or R.

To release the lock: with the brake pedal de-pressed, press the button on the front orside of the selector lever.

Steptronic transmission, Sport andmanual mode

Sport program:

Press the selector lever to the left from se-lector lever position D.

Manual mode:

– To shift down: press the selector leverforward.

– To shift up: pull the selector lever rear-wards.

High beams, headlight flasher, turnsignal, roadside parking light

High beams, headlight flasher

Push the lever forward or pull it backward.

– High beams on, arrow 1.

The high beams light up when the lowbeams are switched on.

– High beams off/headlight flasher, ar-row 2.

Seite 24

QUICK REFERENCE On the road


Turn signal

– On: press the lever past the resistancepoint.

– Off: lightly tap the lever to the resist-ance point.

– Off: press the lever past the resistancepoint in the opposite direction.

– Triple turn signal activation: lightly tapthe lever up or down.

– Brief signaling: press the lever to the re-sistance point and hold it there for aslong as you want the turn signal to flash.

Canada: roadside parking light

To illuminate the vehicle on one side.

– On: with the ignition switched off, pressthe lever either up or down past the re-sistance point for approx. 2 seconds.

– Off: briefly press the lever to the resist-ance point in the opposite direction.

Lights and lighting

Light functions

Symbol Function

Front fog lights.

Automatic headlight control.

Lights off.

Daytime running lights.

Parking lights.

Low beams.

Instrument lighting.

Wiper system

Switching the wipers on/off and briefwipe

Switching on

Press the lever up until the desired positionis reached.

– Resting position of the wipers: posi-tion 0.

Seite 25



– Rain sensor: position 1.

– Normal wiper speed: position 2.

– Fast wiper speed: position 3.

Brief wipe and switching off

Press the lever down.

– Switching off: press the lever down untilit reaches its standard position.

– Brief wipe: press the lever down fromthe standard position.

Rain sensor

Activating/deactivating

To activate: press the lever up once from itsstandard position, arrow 1.

To deactivate: press the lever back into thestandard position.

Set interval or sensitivity of the rainsensor

Turn the thumbwheel on the wiper lever.

Cleaning the windshield

Pull the lever.

Canada: wiper system

Switching the wipers on/off and briefwipe

Switching on

Tap up the lever or press it past the resist-ance point.

Seite 26



– Normal wiper speed: tap up once.

– Fast wiper speed: tap up twice or taponce beyond the resistance point.

Brief wipe and switching off


– To switch off fast wipe: press downtwice.

– To switch off normal wipe: press downonce.

– Brief wipe: press down once.

Rain sensor


Press the button on the wiper lever.

Set interval or sensitivity of the rainsensor

Turn the thumbwheel on the wiper lever.


Pull the lever.

Climate control

Air conditioner

Button Function

Temperature.

Air conditioning.

Recirculated-air mode.

Seite 27



Button Function

Controls the air flow,manual.

Controls the air distributionmanually.

Windshield defroster.

Automatic climate control

Button Function

Temperature.

Air conditioning.

Maximum cooling.

AUTO program.

Recirculated-air mode.

Controls the air flow,manual.

Air distribution, manual.

Defrosts and defogs thewindows.

Button Function

Windshield defroster.

Rear window defroster.

Refueling stop

Refueling

Fuel cap1. Grasp the fuel filler flap at the rear edge

and open it.

2. Turn the fuel cap counterclockwise.

3. Place the fuel cap in the bracket at-tached to the fuel filler flap.

GasolineFor the best fuel efficiency, the gasolineshould be sulfur-free or very low in sulfurcontent.

Refuel only with unleaded gasoline withoutmetallic additives.

Information on the recommended fuel gradecan be found in the Owner's Manual.

Seite 28



Wheels and tires

Tire inflation pressure specifications

The tire inflation pressure values can befound on the sign on the door pillar.

Checking the tire inflation pressureRegularly check the tire inflation pressureand correct it as needed:

– At least twice a month.

– Before embarking on an extended trip.

After correcting the tire inflationpressureReinitialize the Flat Tire Monitor.

Reset the Tire Pressure Monitor.

Electronic oil measurement

RequirementsA current measured value is available afterapprox. 30 minutes of driving. During ashorter trip, the status of the last, suffi-ciently long trip is displayed.

Displaying the engine oil levelVia the Central Information Display (CID):

1. "My MINI"

2. "Vehicle status"

3. "Engine oil level"

The engine oil level is displayed.

Adding engine oil

General informationSwitch off the ignition and safely park thevehicle before engine oil is added.

Adding engine oil

Only add engine oil when the message isdisplayed in the instrument cluster.

Observe the quantity to be added in themessage.

Take care not to add too much engine oil.

Observe recommended engine oil types.

Providing assistance

Hazard warning flashers

The button is located above the Control Dis-play.

Seite 29



Breakdown assistance

MINI Roadside AssistanceThis service can be reached around theclock in many countries.

1. "MINI Connected"

2. "MINI Assist"

3. "MINI Roadside Assistance"

The contact to the MINI Roadside Assis-tance is established.

A telephone number is displayed, ifneeded. Select to dial the telephonenumber on a connected mobile phone.

Seite 30



Seite 31



Cockpit


This chapter describes all standard, country-specific and optional features offered withthe series. It also describes features andfunctions that are not necessarily available

in your vehicle, e.g., due to the selected op-tions or country versions. This also appliesto safety-related functions and systems.When using these functions and systems,the applicable laws and regulations must beobserved.

In the vicinity of the steering wheel

1 Power windows, all 65

2 Power windows, individual 65

3 Exterior mirror operation 78

4 Buttons of the central locking sys-tem 58

5 Lights

Front fog lights 129

Light switch 126

Lights off

Daytime running lights 128

Parking lights 126

Low beams 126

Seite 32

AT A GLANCE Cockpit


Automatic headlight con-trol 127

Cornering light 128

High-beam Assistant 128Instrument lighting 130

6 Steering wheel buttons, left

Camera-based cruise controlon/off 158

Cruise control on/off 164

Cruise control: to store thespeed

Pausing, continuing cruisecontrol

Cruise control: increase speed

Cruise control: reduce speed

Camera-based cruise control:reduce distance

Camera-based cruise control:increase distance

7 Steering column stalk, left

Turn signal 92

High beams, head-light flasher 92

High-beam Assistant 128

Roadside parking lights 127

Onboard Computer 119

8 Instrument cluster 109

9 Steering column stalk, right

Wipers 93

Wiper on Canadian mod-els 96Rain sensor 94

Rain sensor on Canadian mod-els 97

Cleaning windows 94

10 Steering wheel buttons, right

Telephone 232

Confirm the selection 119

Selection back 119

Selection next 119

Increase volume

Reduce volume

11 Horn, entire surface

12 Adjusting the steering wheel 80

13 Unlocking the hood 266

Seite 33

Cockpit AT A GLANCE


In the vicinity of the center console

1 Hazard warning system 285

Intelligent Safety 144

2 Control Display 36

3 Radio/Multimedia

4 Glove compartment 195

5 Climate control 178

6 PDC Park Distance Con-trol 166

Rearview camera 170

Parking assistant 173Auto Start/Stop func-tion 89

Start/stop the engine andswitch the ignition on/off 86DSC Dynamic Stability Control 153

MINI Driving Modesswitch 155

7 Steptronic transmission selectorlever 101

Manual transmission gearshiftlever 100

8 Controller with buttons 39

9 Parking brake 91

Seite 34

AT A GLANCE Cockpit


All around the interior mirror

1 Emergency Request,SOS 286

2 Indicator light, front-seat pas-senger airbag 135

3 Reading lights 130

4 Ambient light 130

5 Convertible top 67

6 Interior lights 130

Seite 35

Cockpit AT A GLANCE


Central Information Display (CID)


This chapter describes all standard, country-specific and optional features offered withthe series. It also describes features andfunctions that are not necessarily availablein your vehicle, e.g., due to the selected op-tions or country versions. This also appliesto safety-related functions and systems.When using these functions and systems,the applicable laws and regulations must beobserved.

Concept

The Central Information Display (CID) com-bines the functions of a multitude ofswitches. These functions can be operatedvia the Controller.

Safety information

Warning

Operating the integrated information sys-tems and communication devices whiledriving can distract from traffic. It is pos-sible to lose control of the vehicle. There isa risk of accident. Only use the systems ordevices when the traffic situation allows.As warranted, stop and use the systemsand devices while the vehicle is stationary.

Input and display

Letters and numbersDepending on the menu, you can switch be-tween entering upper and lower case let-ters, numbers and characters:

Symbol Function

Change between capital andlower-case letters.

Insert blank space.

Use voice activation.

Confirm entry.

Without navigation system Select the symbol.

Entry comparisonWhen entering names and addresses, thechoice is narrowed down with every letterentered and letters may be added automati-cally.

Entries are continuously compared withdata stored in the vehicle.

Only those letters are offered during entryfor which data is available.

Activating/deactivating thefunctionsSeveral menu items are preceded by acheckbox. The checkbox indicates whetherthe function is activated or deactivated. Se-lecting the menu item activates or deacti-vates the function.

Function is activated.

Function is deactivated.

Seite 36

AT A GLANCE Central Information Display (CID)


Status information

General informationThe status field can be found in the upperarea of the Control Display. Status informa-tion is displayed in the form of symbols.

Radio

Symbol Meaning

HD Radio station is being re-ceived.

Satellite radio is switched on.

Telephone

Symbol Meaning

Incoming or outgoing call.

Missed call.

Signal strength of cellular net-work.

Symbol flashes: network search.

Cellular network is not available.

Roaming is active.

SMS text message received.

Message received.

Reminder.

Sending not possible.

Entertainment

Symbol Meaning

Bluetooth audio.

USB audio interface.

Other symbols

Symbol Meaning

Check Control message.

The sound output has beenswitched off.

Checking the current vehicle po-sition.

Control elements

Overview

1 Control Display

2 Controller with buttons

Control Display

General informationTo clean the Control Display, follow the careinstructions, refer to page 297.

In the case of very high temperatures onthe Control Display, for instance due to in-tense solar radiation, the brightness may bereduced down to complete deactivation.Once the temperature is reduced, for in-stance through shade or air conditioning,the normal functions are restored.

Seite 37

Central Information Display (CID) AT A GLANCE


Safety information

NOTICE

Objects in the area in the front of the Con-trol Display can shift and damage the Con-trol Display. There is a risk of damage toproperty. Do not place objects in the areain front of the Control Display.

Switching on/off automaticallyThe Control Display is switched on automat-ically when the vehicle is unlocked or assoon as the Control Display is needed foroperation.

In certain situations, the Control Display isswitched off automatically, for instance ifno operation is performed on the vehicle forseveral minutes.

Switching on/off manuallyThe Control Display can also be switched offmanually.

1. Press the button.

2. "Turn off control display"

Press the Controller or any button on theController to switch it back on again.

Controller with navigation system

General informationThe buttons can be used to open the menusdirectly. The Controller can be used to se-lect menu items and enter the settings.

Operation– Turn to switch between menu items, for

example.

– Press to select a menu item, for example.

– Tilt in four directions to switch betweendisplays, for example.


Button Function



Opens the Communication menu.

Opens the Media/Radio menu.

Seite 38



Button Function

Opens destination input menufor navigation.

Opens navigation map.



Controller without navigationsystem

General informationThe buttons can be used to open the menusdirectly. The Controller can be used to se-lect menu items and enter the settings.

Operation– Turn to switch between menu items, for

example.

– Press to select a menu item, for example.

– Tilt in two directions to switch betweendisplays, for example.


Button Function





Open the Audio menu.

Opens the Phone menu.

Operating via the Controller

Opening the main menuPress the button.

Seite 39



The main menu is displayed.

All Central Information Display (CID) func-tions can be called up via the main menu.

Selecting menu itemsHighlighted menu items can be selected.

1. Turn the Controller until the desiredmenu item is highlighted.

2. Press the Controller.

Adjusting menu contentsThe display of menus "Media/Radio","Communication" and "MINI Connected" canbe adjusted, for instance to remove the en-tries of functions that are not used from themenu.

Via Central Information Display (CID):

1. Select the menu.

2. "Personalize menu"

3. Select desired menu contents to be dis-played.

Changing between displaysAfter a menu item is selected, for instance"System settings", a new display appears.

– Move the Controller to the left.

The current display closes and the previ-ous display is shown.

– Press the button.

The previous display re-opens.

– Move the Controller to the right.

The new display opens.

An arrow indicates that additional displayscan be opened.

Opening recently used menusThe recently used menus can be displayed.

Press the button twice.

Opening the Options menuPress the button.

The "Options" menu is displayed.

The menu consists of various areas, for in-stance:

– "Media/Radio": control options for theselected main menu.

– "Save station": if applicable, further con-trol options for the selected menu.

Entering letters and numbers

Input1. Turn the Controller: select letters or

numbers.

2. : confirm entry.

Seite 40



Deleting

Symbol Function

Press the Controller: deleteletters or number.

or

Hold the Controller down: de-lete all letters or numbers.

Using alphabetical listsFor alphabetical lists with more than 30 en-tries, the letters for which there is an entryare displayed at the left edge.

1. Turn the Controller to the left or rightquickly.

All letters for which there are entriesare displayed on the left edge.

2. Select the first letter of the desired en-try.

The first entry of the selected letter isdisplayed.

Programmable memory but-tons

General informationThe Central Information Display (CID) func-tions can be stored on the programmablememory buttons and called up directly, forinstance radio stations, phone numbers, andmenu entries.

Settings are stored for the driver profilecurrently used.

Storing a function1. Select the function via the Central Infor-

mation Display (CID).

2. Press and hold the desired but-ton, until a signal sounds.

Executing a functionPress the button.

The function will work immediately.This means, for instance that the number isdialed when a phone number is selected.

Displaying the key assignmentTouch buttons with finger. Do not weargloves or use objects.

The assignment of the buttons is displayedin the upper area of the Control Display.

Deleting the button assignments1. Press buttons 1 and 6 simultaneously

for approx. 5 seconds.

2. "OK"

Seite 41



General settings



Language

Setting the languageVia the Central Information Display (CID):

1. "My MINI"


3. If necessary, "Language"

4. "Language:"

5. Select the desired setting.

The setting is stored for the driver profilecurrently used.

Time

Setting the timeVia the Central Information Display (CID):

1. "My MINI"


3. "Date and time"

4. "Time:"

5. Turn the Controller until the desiredhours are displayed.


7. Turn the Controller until the desired mi-nutes are displayed.


Setting the time formatVia the Central Information Display (CID):

1. "My MINI"


3. "Date and time"

4. "Time format:"



Date

Setting the dateVia the Central Information Display (CID):

1. "My MINI"


3. "Date and time"

4. "Date:"

5. Turn the Controller until the desired dayis displayed.


7. Make the settings for the month andyear.

Seite 42

AT A GLANCE General settings


Setting the date formatVia the Central Information Display (CID):

1. "My MINI"


3. "Date and time"

4. "Date format:"



Setting the units of measure-ment

You can set the units of measurement forsome values, for example, consumption, dis-tances and temperature.

Via the Central Information Display (CID):

1. "My MINI"


3. "Units"

4. Select the desired menu item.



Activating/deactivating thedisplay of the current vehicleposition

ConceptIf vehicle tracking has been activated, thecurrent vehicle position can be displayed inthe MINI Connected app.

Activating/deactivatingVia the Central Information Display (CID):

1. "My MINI"

2. "Vehicle settings"

3. "Vehicle tracking"

4. "Vehicle tracking"


Activating/deactivatingpopup windows

For some functions, popup windows are dis-played automatically on the Control Display.Some of these popup windows can be acti-vated or deactivated.


1. "My MINI"


3. "Pop-ups"



Control Display

BrightnessVia the Central Information Display (CID):

1. "My MINI"


3. "Displays"

4. "Control display"

5. "Brightness at night"

6. Turn the Controller until the desiredbrightness is set.


Seite 43

General settings AT A GLANCE



Depending on the light conditions, thebrightness settings may not be clearly visi-ble.

ScreensaverIf no entries are made via the Central Infor-mation Display (CID), a screensaver can bedisplayed after an adjustable time.


1. "My MINI"


3. "Displays"

4. "Control display"

5. "Screensaver"



Messages

ConceptThe menu centrally displays all messages ar-riving in the vehicle in list form.

General informationThe following messages can be displayed:

– Traffic messages.

– Check Control messages.

– Messages on service notifications.

– Messages from the vehicle manufac-turer.

Messages are additionally displayed in thestatus field.

Retrieving messagesVia the Central Information Display (CID):

1. "Notifications"

2. Select the desired message.

The menu in which the message is dis-played will open.

Deleting messagesAll messages, except Check Control mes-sages or messages from the vehicle manu-facturer, can be deleted from the list.

Check Control messages or messages fromthe vehicle manufacturer are displayed aslong as they are relevant.


1. "Notifications"

2. Select the desired message.


4. "Delete this notification" or "Delete allnotifications"

AdjustingThe following settings can be adjusted:

– Select the applications, from which mes-sages will be permitted.

– Sort the messages according to date orpriority.


1. "My MINI"


3. "Notifications"


Seite 44



Data protection

Data transfer

ConceptThe vehicle offers various functions whichrequire data to be transferred to MINI or aservice provider. The data transfer can bedeactivated for some functions.

General informationWith data transfer deactivated, the respec-tive function cannot be used.

Only make these settings while stationary.

Activating/deactivatingFollow the instructions on the Control Dis-play.


1. "My MINI"


3. "Data privacy"


Deleting personal data in thevehicle

ConceptDepending on the usage, the vehicle storespersonal data, such as stored radio stations.This personal data can be permanently de-leted via the Central Information Display(CID).

General informationDepending on the vehicle equipment, thefollowing data is deleted:

– Driver profile settings.

– Stored radio stations.

– Stored programmable memory buttons.

– Travel and Onboard Computer informa-tion.

– Phone book.

Altogether, the deletion of the data can takeup to 15 minutes.

Functional requirementData can only be deleted while stationary.

Deleting dataNote and follow the instructions on the Con-trol Display.


1. "My MINI"


3. "Data privacy"

4. "Delete personal data"

5. "Delete personal data"

6. "OK"

7. Exit and lock the vehicle.

The deletion process takes 15 minutes tocomplete.

If not all data was deleted, repeat the dele-tion.

Canceling deletionStart the engine to cancel deletion of thedata.

Connections

ConceptVarious connection types are available forusing mobile devices in the vehicle. Theconnection type to select depends on themobile device and the desired function.

Seite 45



General informationThe following overview shows possiblefunctions and the suitable connection typesfor them. The scope of functions depends onthe mobile device.

Function Connec-tion type

Making calls via the hands-free system.

Using phone functions viathe Central Information Dis-play (CID).

Bluetooth.

Playing music from thesmartphone or the audioplayer.

Bluetoothor USB.

USB storage device:

Playing music.

USB.

The following connection types require one-time pairing with the vehicle:

– Bluetooth.

Paired devices are automatically recognizedlater on and connected to the vehicle.

Safety information

Warning


Compatible devices

General informationMalfunctions may occur with devices notlisted or deviating software versions.

Displaying the vehicle identificationnumber and software part numberWhen looking for compatible devices, youmay have to state the vehicle identificationnumber and the software part number.These numbers can be displayed in the ve-hicle.


1. "My MINI"


3. "Mobile devices"

4. "Settings"

5. "Bluetooth® info"

6. "System information"

Bluetooth connection

Functional requirements– Compatible device, refer to page 46,

with Bluetooth interface.

– The vehicle key is in the vehicle.

– The device is ready for operation.

– Bluetooth is activated on the device andin the vehicle, refer to page 46.

– Bluetooth presettings, such as visibility,may be required on the device; refer tothe owner's manual of the device.

Switching on BluetoothVia the Central Information Display (CID):

1. "My MINI"


3. "Mobile devices"

Seite 46



4. "Settings"

5. "Bluetooth®"

Pairing the mobile device with thevehicleVia the Central Information Display (CID):

1. "My MINI"


3. "Mobile devices"

4. "Connect new device"

5. Select the functions for which the de-vice will be used:

– "Telephone"

– "Bluetooth® audio"

The vehicle's Bluetooth name is dis-played on the Control Display.

6. On the mobile device, search for Blue-tooth devices in the vicinity.

The Bluetooth name of the vehicle ap-pears on the mobile device display.

Select the Bluetooth name of the vehi-cle.

7. Depending on the mobile device, a con-trol number is displayed or the controlnumber must be entered.

– Compare the control number dis-played on the Control Display withthe control number on the display ofthe device.

Confirm the control number on thedevice and on the Control Display.

– Enter and confirm the same controlnumber on the device and via theCentral Information Display (CID).

The device is connected and displayedin the device list.

If connection was not successful: Fre-quently Asked Questions, refer to page 47.

Frequently Asked QuestionsAll requirements are met and all requiredsteps were completed in the specified order.Despite that, the mobile device does notfunction as expected.

In this case, the following explanations canhelp:

Why could the mobile phone not be pairedor connected?

– There are too many Bluetooth devicesconnected to the mobile phone or vehi-cle.

In the vehicle, delete Bluetooth connec-tions with other devices.

Delete all known Bluetooth connectionsfrom the device list on the mobile phoneand start a new device search.

– The mobile phone is in power-save modeor has only a limited remaining batterylife.

Charge the mobile phone.

Why does the mobile phone no longer re-act?

– The applications on the mobile phone donot function anymore.

Switch the mobile phone off and onagain.

– Possibly too high or too low ambienttemperatures for mobile phone opera-tion.

Do not subject the mobile phone to ex-treme ambient temperatures.

Why can phone functions not be used viathe Central Information Display (CID)?

– The mobile phone may not be properlyconfigured, for instance as Bluetooth au-dio device.

Connect the mobile phone with the tele-phone function.

Why are no or not all phone book entriesdisplayed or why are they incomplete?

Seite 47



– Transmission of the phone book entriesis not yet complete.

– It is possible that only the phone bookentries of the mobile phone or the SIMcard are transmitted.

– It may not be possible to display phonebook entries with special characters.

– It may not be possible to transmit con-tacts from social networks.

– The number of phone book entries to bestored is too high.

– Data volume of the contact too large, forinstance due to stored information suchas notes.

Reduce the data volume of the contact.

– A mobile phone is only connected as anaudio source.

Reconfigure the mobile phone and con-nect it with the telephone function.

How can the phone connection quality beimproved?

– The strength of the Bluetooth signal onthe mobile phone can be adjusted, de-pending on the mobile phone.

If all points in this list have been checkedand the required function is still not availa-ble, contact the hotline, a dealer’s servicecenter or another qualified service center orrepair shop.

USB connection

General informationThe following mobile devices can be con-nected to the USB port:

– Mobile phones.

– Audio devices with USB port, for in-stance MP3 players.

– USB storage devices.

Common file systems are supported.FAT32 and exFAT are the recommendedformats.

A connected USB storage device will besupplied with charge current via the USBport if the device supports this. Follow themaximum charge current of the USB port.

USB ports with data transfer can be used toplay the music files via USB Audio.

Follow the following when connecting:

– Do not use force when plugging the con-nector into the USB port.

– Use a flexible adapter cable.

– Protect the USB storage device againstmechanical damage.

– Due to the large number of USB storagedevices available on the market, it can-not be guaranteed that every device isoperable on the vehicle.

– Do not expose USB storage devices toextreme environmental conditions, suchas very high temperatures; refer to theowner's manual of the device.

– Due to the many different compressiontechniques, proper playback of the me-dia stored on the USB storage devicecannot be guaranteed in all cases.

– To ensure proper transmission of thestored data, do not charge a USB storagedevice via the onboard socket, when itis connected to the USB port.

– Depending on how the USB storage de-vice is being used, settings may be re-quired on the USB storage device, referto the owner's manual of the device.

Not compatible USB media:

– USB hard drives.

– USB hubs.

– USB memory card readers with multipleslots.

– HFS-formatted or NTFS-formatted USBstorage devices.

– Devices such as fans or lamps.

Seite 48



Functional requirementCompatible device, refer to page 46, withUSB port.

Connecting the deviceConnect the USB device using a suitableadapter cable to a USB port, refer topage 194.

The USB device is connected to the vehicleand displayed in the device list.

Managing mobile devices

General information– After one-time pairing, the devices are

automatically recognized and recon-nected when the ignition is switched on.

– The data stored on the SIM card or inthe mobile phone is transferred to thevehicle after recognition.

– For some devices, certain settings maybe necessary, for instance authorization,see owner's manual of the device.

Displaying the device listAll devices paired and/or connected withthe vehicle are displayed in the device list.


1. "My MINI"


3. "Mobile devices"

A symbol indicates, for which function a de-vice is used.

Symbol Function

"Telephone"

"Bluetooth® audio"

Configuring the deviceFunctions can be activated or deactivatedfor paired and connected devices.


1. "My MINI"


3. "Mobile devices"

4. Select the desired device.


If a function is assigned to a device, thefunction will be deactivated where appro-priate for a device that is already connectedand the device will be disconnected.

Disconnecting the deviceThe device's connection to the vehicle isdisconnected.

The device remains paired and can be con-nected again, refer to page 49.


1. "My MINI"


3. "Mobile devices"

4. Select device.

5. "Disconnect device"

Connecting the deviceA disconnected device can be reconnected.


1. "My MINI"


3. "Mobile devices"

4. Select device.

5. "Connect device"

The functions that were assigned to the de-vice before disconnecting are assigned tothe device when it is reconnected. The func-tions may be deactivated on a device al-ready connected.

Seite 49



Deleting the deviceVia the Central Information Display (CID):

1. "My MINI"


3. "Mobile devices"

4. Select device.

5. "Delete device"

The device is disconnected and removedfrom the device list.

Seite 50



Owner's Manual media



General information

You can use the following media formats tocall up the content in the Owner's Manual:

– Printed Owner's Manual, refer topage 51.

Printed Owner's Manual

ConceptThe printed Owner's Manual describes allstandard, country-specific, and optional fea-tures offered with the series.

General informationThe Owner's Manual for Navigation, Enter-tainment, and Communication can be ob-tained as a printed book from the servicecenter.

Supplementary Owner's ManualsAlso follow the Supplementary Owner'sManuals, which are included in addition tothe onboard literature.

Seite 51

Owner's Manual media AT A GLANCE


Opening and closing



Vehicle key

General informationThe vehicle is supplied with two vehiclekeys with integrated key.

Each vehicle key contains a replaceable bat-tery, refer to page 55.

Depending on the equipment and countryversion, various settings, refer to page 62,can be configured for the button functions.

A personal driver profile, refer to page 61,for each vehicle key is stored in the vehicle.

To provide information on maintenance re-quirements, the service data is stored in thevehicle key, refer to page 274.

To prevent possible locking in of the vehiclekey, take the vehicle key with you when ex-iting the vehicle.

Safety information

Warning

People or animals in the vehicle can lockthe doors from the inside and lock them-selves in. In this case, the vehicle cannotbe opened from the outside. There is a riskof injury. Take the vehicle key with you sothat the vehicle can be opened from theoutside.

Warning

Unlocking from the inside is only possiblewith special knowledge.

Persons who spend a lengthy time in thevehicle while being exposed to extremetemperatures are at risk of injury or death.Do not lock the vehicle from the outsidewhen there are people in it.

Warning

Unattended children or animals in the ve-hicle can cause the vehicle to move andendanger themselves and traffic, for in-stance due to the following actions:

– Pressing the Start/Stop button.

– Releasing the parking brake.

– Opening and closing the doors orwindows.

– Engaging selector lever position N.

– Using vehicle equipment.

There is a risk of accidents or injuries. Donot leave children or animals unattendedin the vehicle. Take the vehicle key withyou when exiting and lock the vehicle.

Seite 52

CONTROLS Opening and closing


Overview

1 Unlocking

2 Locking

3 Unlocking the trunk lid

4 Panic mode

UnlockingPress the button on the vehicle key.

Depending on the settings, refer topage 62, the following access points areunlocked.

– Driver's door and fuel filler flap.

Press the button on the vehicle keyagain to unlock the other vehicle accesspoints.

– All doors, trunk lid, and fuel filler flap.

In addition, the following functions are exe-cuted:

– Unlocking is confirmed by the turn sig-nals and the horn. This function must beactivated in the settings, refer topage 62.

– The settings stored in the driver profile,refer to page 61, are applied.

– The interior lights, refer to page 130,and the MINI logo projection areswitched on, provided that the interiorlights were not switched off manually.

– Depending on the settings, the welcomelight and pathway lighting, refer topage 127, are switched on.

– Exterior mirrors folded through conven-ient closing are folded open.

– The alarm system, refer to page 63, isswitched off.

The light functions may depend on the am-bient brightness.

Convenient opening

Safety information

Warning

Body parts can be jammed when openingand closing the convertible top. There is arisk of injury. When opening and closingthe convertible top, observe the movementand keep the area of movement clear.

Opening

Press and hold the button on the ve-hicle key after unlocking.

The windows and the sliding sun roofintegrated into the convertible top areopened, as long as the button on the vehiclekey is pressed.

With Comfort Access:

If close to the vehicle, the convertible topcan also be opened.

Press the button on the vehicle keyagain after the sliding sun roofintegrated into the convertible top

is fully opened. Press and hold the buttonuntil the convertible top is fully opened andlocked.

Leaving the vicinity of the vehicle stops themotion.

Seite 53

Opening and closing CONTROLS


Locking1. Close the driver's door.

2. Press the button on the vehiclekey.

The following functions are executed:

– All doors, the trunk lid, and the fuel fillerflap are locked.

– Locking is confirmed by the turn signalsand the horn. This function must be ac-tivated in the settings, refer topage 62.

– The alarm system, refer to page 63, isswitched on.

If the engine or ignition is still switched onwhen you lock the vehicle, the vehicle hornhonks twice. In this case, the engine or ig-nition must be switched off by means of theStart/Stop button.

With Comfort Access: convenientclosing

Safety information

Warning

With convenient closing, body parts canbe jammed. There is a risk of injury. Makesure that the area of movement of thedoors is clear during convenient closing.

Closing

Press and hold the button on the ve-hicle key in the area close to the ve-hicle, until the closing operation is

completed.

The windows and convertible top close.

Releasing the button stops the closing pro-cedure. Leaving the vicinity of the vehiclestops the motion of the convertible top.

Press button in the vicinity of the vehicleagain until the convertible top operation iscompleted.

Switch on interior lights andcourtesy light

Press the button on the vehicle keywith the vehicle locked.

The MINI logo projection is also switchedon.

These functions are not available if the inte-rior lights were switched off manually.

The light functions may depend on the am-bient brightness.

After locking, wait 10 seconds before press-ing the button again.

Trunk lid

General informationTo avoid locking the vehicle key in the vehi-cle, do not place the remote control in thecargo area.

Depending on the vehicle equipment andcountry version, it is possible to specifywhether the trunk lid can be unlocked withthe vehicle key and how the vehicle doorswill respond to this. To perform settings, re-fer to page 62.

Safety information

Warning

Body parts can be jammed when operatingthe trunk lid. There is a risk of injury.Make sure that the area of movement ofthe trunk lid is clear during opening andclosing.

Seite 54



Opening

Press the button on the vehicle keyfor approx. 1 second.

The trunk lid is unlocked and can be swungdownward.


– Press the button on the vehiclekey and hold for at least 3 sec-onds.

– Briefly press the button on the vehiclekey three times in succession.


Replacing the battery1. Remove the integrated key from the ve-

hicle key, refer to page 57.

2. Slide the integrated key into the open-ing and raise the cover.

The battery compartment is accessible.

3. Slide the integrated key in the cover ofthe battery compartment and raise thecover.

4. Push battery in the direction of the ar-row using a pointed object and lift itout.

5. Insert a type CR 2032 battery with thepositive side facing up.

6. Insert lid and cover.

7. Push the integrated key into the vehiclekey until it engages.

Have old batteries disposed of by adealer’s service center or anotherqualified service center or repair

shop or take them to a collection point.

Additional vehicle keysAdditional vehicle keys are available from aservice center or another qualified servicecenter or repair shop.

Loss of vehicle keysA lost vehicle key can be blocked and re-placed by a dealer’s service center or an-

Seite 55



other qualified service center or repairshop.

Malfunction

General informationA Check Control message is displayed.

Vehicle key recognition by the vehicle maymalfunction under the following circum-stances:

– The battery of the vehicle key is dis-charged. For replacing the battery, referto page 55.

– Interference of the radio connectionfrom transmission towers or otherequipment with high transmittingpower.

– Shielding of the vehicle key due to metalobjects.

Do not transport the vehicle key to-gether with metal objects.

– Interference of the radio connectionfrom mobile phones or other electronicdevices in direct proximity to the vehi-cle key.

Do not transport the vehicle key to-gether with electronic devices.

– Interference of radio transmission by acharging process of mobile devices, forinstance charging of a mobile phone.

In the case of interference, the vehicle canbe unlocked and locked from the outsidewith the integrated key, refer to page 57.

Starting the engine via emergencydetection of the Vehicle key

It is not possible to start the engine if thevehicle key has not been detected.

Proceed as follows in this case:

1. Hold the vehicle key against the markon the steering column as shown. Payattention to the display in the instru-ment cluster.

2. If the vehicle key is detected:

Start the engine within 10 seconds.

If the vehicle key is not recognized, slightlychange the position of the vehicle key andrepeat the procedure.

Frequently Asked QuestionsWhat precautions can be taken to be able toopen a vehicle with an accidentally lockedin vehicle key?

– The options provided by the RemoteServices of the MINI Connected app in-clude the ability to lock and unlock a ve-hicle.

This requires an active MINI Connectedcontract and the MINI Connected appmust be installed on a smartphone.

– Unlocking the vehicle can be requestedvia the MINI Connected Call Center.

An active MINI Connected contract isrequired.

Seite 56



Integrated key

General informationThe driver's door can be locked and un-locked without the vehicle key using theintegrated key.

The integrated key can also be used for theglove compartment on the front passengerside.

Safety information

Warning

Unlocking from the inside is only possiblewith special knowledge.

Persons who spend a lengthy time in thevehicle while being exposed to extremetemperatures are at risk of injury or death.Do not lock the vehicle from the outsidewhen there are people in it.

NOTICE

The door lock is permanently joined withthe door. The door handle can be moved.When pulling the door handle with theintegrated key inserted, paint or theintegrated key can be damaged. There is arisk of damage to property. Remove theintegrated key before pulling the outsidedoor handle.

Removing

Press the button, arrow 1, and pull out theintegrated key, arrow 2.

Locking/unlocking via the doorlock1. Remove lid on the door lock.

To do this, slide the integrated key intothe opening from below and remove thelid.

2. Unlock or lock the door lock using theintegrated key.

The other doors must be unlocked or lockedfrom the inside.

Alarm systemThe alarm system is not switched on if thevehicle is locked with the integrated key.

The alarm system is triggered when thedoor is opened, if the vehicle has been un-locked via the door lock.

Seite 57



Buttons for the central lockingsystem

General informationIn the event of a severe accident, the vehi-cle is automatically unlocked. The hazardwarning system and interior lights come on.

Overview

Buttons for the central locking system.

LockingPress the button with the doorsclosed.

– The fuel filler flap remains unlocked.

– The vehicle is not secured against theftwhen locking.

UnlockingPress the button.

Opening

– Press button to unlock the doorstogether, and then pull the door handleabove the armrest.

– Pull the door opener on the door to beopened. The other door remain locked.

Comfort Access

ConceptThe vehicle can be accessed without operat-ing the vehicle key.

Carrying the vehicle key with you, e.g., inyour pants pocket, is sufficient.

The vehicle automatically detects the vehi-cle key when it is in close proximity or inthe car's interior.

General informationComfort Access supports the followingfunctions:

– Unlocking and locking the vehicle.

– Convenient closing.

– Opening trunk lid.

Functional requirements– To lock the vehicle, the vehicle key must

be outside of the vehicle near the doors.

– The next unlocking and locking cycle isnot possible until after approx. 2 sec-onds.

Unlocking

On the driver's or front passenger's outerdoor handle, press the button.

Depending on the settings, refer topage 62, only the driver's door and thefuel filler flap may be unlocked. Unlikewhen unlocking using the vehicle key,

Seite 58



pressing the button on the outer door han-dle again does not unlock the other vehicleaccess points. Rather, the vehicle is lockedagain.

If the vehicle was locked automatically afterdriving off or with the button of the centrallocking system from the inside, note the fol-lowing: if a door on a locked vehicle isopened from the inside with the dooropener, pressing the button on the outerdoor handle will first lock the vehicle again.To unlock, the button on the outer door han-dle must be pressed again.

Locking

On the driver's or front passenger's outerdoor handle, press the button.

Convenient closing

Safety information

Warning

With convenient closing, body parts canbe jammed. There is a risk of injury. Makesure that the area of movement of thedoors is clear during convenient closing.

Closing

Press and hold down the button on the driv-er's or front passenger's outer door handle.

In addition to locking, the convertible topand the windows are closed.

Press and hold the button, until theconvertible top is fully closed.

The exterior mirrors are folded in.

Opening the trunk lid

General informationIf you open the trunk lid via Comfort Ac-cess, locked doors will not be unlocked.

To avoid locking the vehicle key in the vehi-cle, do not place the vehicle key in the cargoarea.

Safety information

Warning


Seite 59



Opening

Press the button on the exterior of thetrunk lid.

MalfunctionVehicle key recognition by the vehicle maymalfunction under the following circum-stances:

– The battery of the vehicle key is dis-charged. For replacing the battery, referto page 55.

– Interference of the radio connectionfrom transmission towers or otherequipment with high transmittingpower.

– Shielding of the vehicle key due to metalobjects.

Do not transport the vehicle key to-gether with metal objects.

– Interference of the radio connectionfrom mobile phones or other electronicdevices in direct proximity to the vehi-cle key.

Do not transport the vehicle key to-gether with electronic devices.

Wet or snowy conditions may disrupt thelocking request recognition function on thedoor handles.

In the case of a malfunction, unlock andlock the vehicle using the buttons of the ve-hicle key or use the integrated key, refer topage 57.

Trunk lid

General informationTo avoid locking the vehicle key in the vehi-cle, do not place the remote control in thecargo area.

Depending on the vehicle equipment andcountry version, it is possible to specifywhether the trunk lid can be unlocked withthe vehicle key and how the vehicle doorswill respond to this. To perform settings, re-fer to page 62.

Safety information

Warning


Opening from the outside

– Without Comfort Access: unlock vehicle.

With Comfort Access: unlock the vehi-cle or have the vehicle key with you.

Press the button on the trunk lid.

– Press the button on the vehiclekey for approx. 1 second.

Depending on the setting, the doors mayalso be unlocked. Unlocking using thevehicle key, refer to page 54.

Seite 60



The trunk lid is unlocked and can be swungdownward.

Opening from the insideWith the vehicle stationary, pressthe button in the driver's floor area.

ClosingTo close the trunk lid, swivel it upwards andpress it closed.

Trunk emergency unlocking

Pull the handle inside the cargo area.

The trunk lid unlocks.

Driver profiles

ConceptIn the driver profiles, individual settings forseveral drivers can be stored and called upagain when required.

General informationThere are three driver profiles with whichpersonal vehicle settings can be stored. Ev-ery vehicle key has been assigned one ofthese driver profiles.

If the vehicle is unlocked using the vehiclekey, the assigned personal driver profile willbe activated. All settings stored in thedriver profile are automatically applied.

If several drivers use their own vehiclekeys, the vehicle will apply the personal set-tings as it is being unlocked. These settingsare also restored, if the vehicle has beenused in the meantime by a person with adifferent vehicle key.

Changes to the settings are automaticallystored in the driver profile currently acti-vated.

Functional requirementsFor the system to be able to identify thedriver profile associated to a particulardriver, the detected vehicle key must beclearly allocated to the driver.

This is the case when:

– The driver is only carrying his or herown vehicle key.

– The driver unlocks the vehicle.

– The driver gets into the vehicle throughthe driver's door.

AdjustingThe settings for the following systems andfunctions are stored in the active profile.The scope of storable settings depends oncountry and equipment.

– Unlocking and locking.

– Lights.

– Radio.

– Instrument cluster.

– Programmable memory buttons.

– Volumes, tone.

– Control Display.

– Climate control.

– PDC Park Distance Control.

– Rearview camera.

– MINI Driving Modes.

– Intelligent Safety.

Seite 61



System limitsA clear assignment between the vehicle keyand driver may not be possible in the fol-lowing cases, for example.

– The passenger unlocks the vehicle withhis or her own vehicle key, but anotherperson is driving.

– The driver unlocks the vehicle via Com-fort Access and has multiple vehiclekeys with him or her.

– The driver changes, but the vehicle isnot locked and unlocked.

– Multiple vehicle keys are located out-side of the vehicle.

Adjusting

General informationDepending on the package and country ver-sion, various settings are available for thevehicle key functions.

These settings are stored for the driver pro-file, refer to page 61, currently used.

Unlocking

DoorsVia the Central Information Display (CID):

1. "My MINI"


3. "Doors/Key"

4. "Driver's door" or "All doors"

5. Select the desired setting:

– "Driver's door only"

Only the driver's door and the fuelfiller flap are unlocked. Pressingagain unlocks the entire vehicle.

– "All doors"

The entire vehicle is unlocked.

Trunk lidVia the Central Information Display (CID):

1. "My MINI"


3. "Doors/Key"

4.

The text next to the symbol indicatesthe current setting.


– "Tailgate"

Only the trunk lid is unlocked.

– "Tailgate and door(s)"

The trunk lid and the doors are un-locked.

– "Tailgate opens after unlocking"

The vehicle must be unlocked beforethe trunk lid can be used with the re-mote control.

– "Button lock"

It is not possible to use the trunk lidvia the vehicle key.

Depending on the vehicle equipment andcountry version, this setting may not be of-fered.

Automatic lockingVia the Central Information Display (CID):

1. "My MINI"


3. "Doors/Key"


– "Lock automatically"

The vehicle locks automatically aftera while if no door is opened after un-locking.

– "Lock after starting to drive"

The vehicle locks automatically afteryou drive off.

Seite 62



Automatic unlockingVia the Central Information Display (CID):

1. "My MINI"


3. "Doors/Key"

4. "Unlock at end of trip"

After the engine is switched off bypressing the Start/Stop button, thelocked vehicle is automatically un-locked.

Confirmation signals from thevehicleVia the Central Information Display (CID):

1. "My MINI"


3. "Doors/Key"

4. Deactivate or activate the desired con-firmation signals.

– "Flash for lock/unlock"

Unlocking is signaled by two flashes,locking by one.

– With alarm system:

"Acoustic signal for lock/unlock"

Unlocking is signaled by one honk ofthe horn.

Alarm system

General informationWhen the vehicle is locked, the vehiclealarm system reacts to the followingchanges:

– Unauthorized opening of a door, thehood or the trunk lid.

– Movements in the car's interior.

– Changes in the vehicle tilt, for instance,during attempts at stealing a wheel orwhen towing the vehicle.

– Disconnected battery voltage.

– Improper use of the socket for OnboardDiagnosis.

– Locking the vehicle while a device isconnected to the socket for the OBD On-board-Diagnosis. For socket for the OBDOnboard Diagnosis, refer to page 275.

The alarm system signals these changes vis-ually and acoustically:

– Acoustic alarm:

Depending on local regulations, theacoustic alarm may be suppressed.

– Visual alarm:

By flashing of the hazard warning sys-tem and headlights, where required.

Do not modify the system to ensure func-tion of the alarm system.

Overview

Indicator light on the interior mirror.

Switching on/offThe alarm system is switched on or off assoon as the vehicle is locked with the vehi-cle key or unlocked or locked via ComfortAccess.

Seite 63



Opening the doors with the alarmsystem switched onThe alarm system is triggered when a dooris opened if the door was unlocked usingthe integrated key in the door lock.

Switching off the alarm, refer to page 65.

Opening the trunk lid with thealarm system switched onThe trunk lid can be opened even when thealarm system is switched on.

After the trunk lid is closed, it is locked andmonitored again provided the doors arelocked. The hazard warning system flashesonce.


– Press the button on the vehiclekey and hold for at least 3 sec-onds.

– Briefly press the button on the vehiclekey three times in succession.


Signals of the indicator light– The indicator light flashes briefly every

2 seconds:

The alarm system is switched on.

– Indicator light flashes for approx.10 seconds, then it flashes briefly every2 seconds:

Interior motion sensor and tilt alarmsensor are not active, as doors, hood, ortrunk lid are not correctly closed. Cor-rectly closed access points are secured.

When the still open access points areclosed, the interior motion sensor andtilt alarm sensor will be switched on.

– The indicator light goes out after un-locking:

The vehicle has not been tampered with.

– The indicator light flashes after unlock-ing until the engine ignition is switchedon, but no longer than approx. 5 mi-nutes:

An alarm has been triggered.

Tilt alarm sensorThe tilt of the vehicle is monitored.

The alarm system responds in situationssuch as attempts to steal a wheel or whenthe vehicle is towed.

Interior motion sensorThe car's interior is monitored to the heightof the seats. The alarm system is switchedon together with the interior motion sensoreven when the convertible top is open. Fall-ing objects such as leaves can trigger thealarm unintentionally.

Avoiding unintentional alarms

General informationThe tilt alarm sensor and interior motionsensor can trigger an alarm, although no un-authorized action occurred.

Possible situations for an unwanted alarm:

– In automatic vehicle washes.

– In duplex garages.

– During transport on trains carrying ve-hicles, at sea or on a trailer.

– With animals in the vehicle.

– When the vehicle is locked after start offueling.

The tilt alarm sensor and the interior mo-tion sensor can be switched off in such sit-uations.

Seite 64



Switching off the tilt alarm sensor andinterior motion sensor

Press the button on the vehicle keywithin 10 seconds as soon as thevehicle is locked.

The indicator light lights up for approx.2 seconds and then continues to flash.

The tilt alarm sensor and interior motionsensor are switched off until the vehicle islocked again.

Switching off the alarm– Unlock the vehicle with the vehicle key.

– Unlock the vehicle with the integratedkey and switch on the ignition using theemergency detection of the vehicle key,refer to page 56.

– With Comfort Access: if you have thevehicle key with you, unlock the vehicleusing the button on the driver's side orpassenger side door.

Power windows

General informationIf an accident of a certain severity occurs,the windows are automatically closed ex-cept a gap.

Safety information

Warning

When operating the windows, body partsand objects can be jammed. There is a riskof injury or risk of damage to property.Make sure that the area of movement ofthe windows is clear during opening andclosing.

Overview

Power windows.

Power windows for all windows.

Opening

– Press the switch to the resistancepoint.

The window opens while the switch isbeing held.

– Press the switch beyond the resist-ance point.

The window opens automatically. Press-ing the switch again stops the motion.

– Press the switch to the resistancepoint.

All side windows open simultaneouslywhile the switch is being held.

– Press the switch beyond the resist-ance point.

All side windows automatically open si-multaneously. Pressing the switch againstops the motion.

Convenient opening with the vehicle key,refer to page 53.

Seite 65



Closing

– Pull the switch to the resistancepoint.

The window closes while the switch isbeing held.

– Pull the switch beyond the resist-ance point.

The window closes automatically if thedoor is closed. Pulling the switch againstops the motion.

– Pull the switch.

All side windows close simultaneouslywhile the switch is being held.

Convenient closing with the vehicle key, re-fer to page 54.

Closing via Comfort Access, refer topage 59.

Jam protection system

ConceptThe jam protection prevents objects or bodyparts becoming jammed between the doorframe and window while the front windowsare being closed.

General informationIf resistance or a blockage is detected whilethe front windows are being closed, theclosing action is interrupted.

The window opens slightly.

Safety information

Warning

Accessories on the windows such as an-tennas can impact jam protection. There isa risk of injury. Do not install accessoriesin the area of movement of the windows.

Closing without the jam protectionsystemIn case of danger from the outside or if icemight prevent normal closing, proceed asfollows:

1. Pull the switch past the resistancepoint and hold it there.

The window closes with limited jam pro-tection. If the closing force exceeds aspecific threshold, closing is inter-rupted.

2. Pull the switch past the resistancepoint again within approx. 4 secondsand hold it there.

The window closes without jam protec-tion.

Malfunction

General informationIn certain situations a window can only beoperated to a limited extent.

– After a power failure during the openingor closing process, the a window canonly be operated to a limited extent. Thesystem must be initialized in this case.

– The power window motors are equippedwith overheating protection. If a win-dow is opened and closed several timeswithin a short period of time, the over-heating protection switches the motoroff temporarily. Depending on the de-gree of overheating, it may only be pos-sible to close the window or it may notbe possible to operate it at all.

In this case: allow the power windowmotor to cool down.

Seite 66



Initializing the systemThe system can be initialized when the ve-hicle is stationary and the engine is run-ning.

During initialization, the affected windowcloses without jam protection.

Warning

When operating the windows, body partsand objects can be jammed. There is a riskof injury or risk of damage to property.Make sure that the area of movement ofthe windows is clear during opening andclosing.

1. Open the affected window completely.

2. Pull the switch to the resistancepoint and hold.

The window closes.

3. Continue holding the switch pulledto the resistance point.

The window opens and closes once ortwice after approx. 15 seconds, depend-ing on the vehicle's equipment.

4. Release switch.

Convertible top withintegrated sliding sun roof

Overview

Convertible top, sliding sun roof switch

Sliding sun roof

General informationBefore closing the sliding sun roof, removeany foreign objects from the windshieldframe; otherwise, closing may be prevented.

Opening

Press the switch backward,until the desired position isreached or the sliding sun roofis fully open.

Closing

Press the switch forward, untilthe desired position is reachedor the sliding sun roof isclosed.

Convertible top

General informationThe convertible top can be opened or closedat speeds up to approx. 18 mph/30 km/h.

Seite 67



If the vehicle is accelerated above a speedof approx. 18 mph/30 km/h while theconvertible top is being moved, theconvertible top movement stops.

Follow the following information:

– While the convertible top is moving, itis not possible to open the trunk lid.

– If possible, close the convertible topwhen the vehicle is parked. A closedconvertible top protects it from weather-related damage and to some extent fromtheft.

– Even when the convertible top is closed,only store valuables in the locked cargoarea or in the locked glove compartment.

– At higher speeds, negative pressure pro-duced in the car's interior causes theconvertible top to begin to flutter. In-crease the air flow via the ventilation toprevent negative pressure in the vehi-cle.

– It is not possible to start the engine andoperate the convertible top simultane-ously. When the engine is started usingthe Start/Stop button or using the AutoStart/Stop function, the convertible topmovement is briefly interrupted.

– Opening a door interrupts closure of theconvertible top.

– When loading the cargo area, make surethat the cargo does not push against thecargo area partition, refer to page 70,from below.

– In order to protect the battery, move theconvertible top only when the engine isrunning if possible.

– Before closing the convertible top, re-move any foreign objects from the wind-shield frame; otherwise, closing may beprevented.

Safety information

NOTICE

Incorrect operation can damage theconvertible top and other parts of the vehi-cle.

There is a risk of damage to property. Dur-ing operation, heed the following points:

– Keep the area of movement of theconvertible top clear because theconvertible top swivels out and up-ward. Maximum area of movement:78.8 inches/2 meters.

– Fully close the trunk lid.

– Do not leave the convertible top openfor more than a day while it is wet.

– Do not open the convertible top, if itis wet, covered in snow, iced up, ordirty.

– Do not place objects on theconvertible top.

– The rollover protection system maynot be triggered.

– Do not operate the convertible top onuneven sections of road.

– Always open or close the convertibletop completely. The convertible top isonly locked in its end positions.

– Make sure that no objects are on thecargo cover when opening theconvertible top.

Warning

Body parts can be jammed when openingand closing the convertible top. There is arisk of injury. When opening and closingthe convertible top, observe the movementand keep the area of movement clear.

Seite 68



Warning

When operating the convertible top whiledriving, the view to the rear may be lim-ited. At speeds above 20 mph/30 km/h theconvertible top stops in its current posi-tion. There is a danger of accidents andproperty damage. When operating theconvertible top while driving, observe traf-fic attentively and, if necessary, reducespeed. Do not operate while backing up orin windy weather.

Warning

The convertible top is not suitable for themounting of roof carrier systems. The roofcarrier could come loose. There is a risk ofaccident. Do not attach any roof carriersystems to the convertible top.

Warning

A convertible top that is not completelyopen or closed is not locked and can openby itself while driving due to the air-stream. There is a risk of injury or risk ofdamage to property. Make sure that theconvertible top is always completely openor closed.

Functional requirementsThe following requirements must be fulfil-led in order to be able to move theconvertible top.

– The ignition or radio-ready state mustbe switched on.

– The cargo area partition, refer topage 70, is stored and latched in thebottom position.

– The trunk lid is closed.

– The external temperature is above14 ℉/-10 ℃.

– The voltage of the vehicle electrical sys-tem is sufficient.

– The convertible top drive is not over-heating.

– Vehicle speed is below18 mph/30 km/h.

– The windows can be lowered.

If one of these requirements is not met, acheck control message is displayed.

Operating from the inside

Opening

Press the switch backwardand hold until the sliding sun-roof is open.

Press the switch backwardagain and hold. The windows

roll down and the convertible top openswhile the switch is being pushed. After theconvertible top is completely open, theswitch can be held or pressed again brieflyin order to raise the windows.

Closing

Push the switch forward andhold. The windows are low-ered, the convertible top isclosed and the windows areraised again while the switchis being held.

Preventing an interruption

Press and hold the switch, until theconvertible top is fully open or closed. ACheck Control message is displayed whenthe opening procedure has finished.

The convertible top movement is inter-rupted if the switch is released. The se-

Seite 69



quence can be continued in the desired di-rection using the switch.

Operate switch again until the convertibleoperation is terminated.

Operation from the outsideWhen equipped with Comfort Access theconvertible top can also be operated fromoutside.

– Convenient opening, refer to page 53,with the vehicle key.

– Convenient closing, refer to page 54,with the vehicle key.

– Closing via Comfort Access, refer topage 58.

Cargo area partitionWith the convertible top closed, the cargoarea volume can be expanded.

Expanding the cargo area volume, refer topage 201.

Wind deflector

ConceptThe wind deflector reduces the air move-ment in the car's interior when driving withthe convertible top down.

Safety information

NOTICE

When moving the front seats back, thewind deflector can be damaged. There is arisk of damage to property. Make sure thatthe area of movement is clear prior tomoving the front seats back.

Warning

Body parts can be jammed when operatingthe wind deflector. There is a risk of in-jury. Make sure that the area of movementaround the wind deflector is clear when in-stalling and removing it and folding it up.

Warning

Objects placed on the installed wind de-flector can be thrown into the car's inte-rior or endanger other traffic participants,for instance in case of an accident, brakingor evasive maneuver. The objects can dam-age the wind deflector. There is a risk ofinjury or risk of damage to property. Donot place any objects on the installed winddeflector.

Warning

Operating the wind deflector while drivingcan distract from the surrounding traffic.There is a risk of accident. Operate thewind deflector only when the vehicle isstationary.

InstallingThe wind deflector is located in a protectivejacket in the cargo area.

To protect the head restraints from damage,slide the rear head restraints into the upperposition prior to installation and removal.

1. Take the wind deflector out of the pro-tective jacket.

Seite 70



Fully unfold the wind deflector so thatthe handle, arrow 1, folds down andlocks the wind deflector.

2. Open the rear side window, if necessary.

Insert wind deflector from one side ofthe vehicle with the pins in the corre-sponding fixing points on the oppositeside of the vehicle.

3. To release the lock, fold the handle upand hold it.

4. Press the wind deflector inwardly andup, arrow 1, to the extent that the winddeflector can be positioned in front ofthe fixing points on the installation side.

Release the handle.

Press the wind deflector downward,while inserting the pins in the corre-sponding fixing points, arrows 2.

5. Press the wind deflector downward inthe middle, until the handle engages, ar-rows 1.

Grasp the inner framework of the winddeflector and fold it up, arrow 2.

Removing1. Fold the handle up to unlock it.

2. Proceed in reverse order to remove thewind deflector.

Seite 71



Seats, mirrors, and steering wheel



Sitting safely

An ideal seating position that meets theneeds of the occupants can make a vitalcontribution to relaxed, fatigue-free driving.

In the event of an accident, the correct seat-ing position plays an important role. Followthe information in the following chapters:

– Seats, refer to page 72.

– Safety belts, refer to page 74.

– Head restraints, refer to page 76.

– Airbags, refer to page 132.

Front seats

Safety information

Warning

Seat adjustments while driving can lead tounexpected movements of the seat. Vehi-cle control could be lost. There is a risk ofaccident. Only adjust the seat on the driv-er's side when the vehicle is stationary.

Warning

With a backrest inclined too far to therear, the efficacy of the safety belt can nolonger be ensured. There is a risk of slid-ing under the safety belt in an accident.There is a risk of injuries or danger to life.Adjust the seat prior to starting the trip.Adjust the backrest so that it is in themost upright position as possible and donot adjust again while driving.

Warning

There is a risk of jamming when movingthe seats. There is a risk of injury or riskof damage to property. Make sure that thearea of movement of the seat is clear priorto any adjustment.

Adjusting seats

Overview

1 Forward/backward

2 Thigh support

3 Height

4 Backrest tilt

Seite 72

CONTROLS Seats, mirrors, and steering wheel


Forward/backward

Pull the lever and slide the seat in the de-sired direction.

After releasing the lever, move the seat for-ward or back slightly making sure it en-gages properly.

Height

Pull the lever up or press it down as often asneeded to reach the desired height.

Backrest tilt

Pull the lever, and apply your weight to thebackrest or lift it off, as necessary.

Lumbar supportThe curvature of the seat backrest can beadjusted in a way that it supports the lum-bar region of the spine. The lower back andthe spine are supported for upright posture.

Turn the wheel in order to increase or de-crease the curvature.

Thigh support

Pull the lever at the front of the seat and ad-just the thigh support.

Entering the rear

Safety information

Warning


Seite 73

Seats, mirrors, and steering wheel CONTROLS


Warning

Unexpected movements of the rear seatbackrest while driving may occur if therear seat backrest is unlocked. Vehiclecontrol could be lost. There is a risk of in-jury. Fold back and lock the rear seat back-rests before driving.

Fold the seat backrest forward1. Pull lever up to the stop.

2. Fold the seat backrest forward.

3. Push the seat forward.

Original positionThe driver's seat features a mechanicalmemory function for forward/back andbackrest adjustment.

1. Push the seat back into the original po-sition.

2. Fold back the backrest to lock the seat.

If the backrest is folded back when the seatis not yet in the original position, the seatengages in the current position. In thiscase, manually adjust longitudinal direction,refer to page 73.

Front seat heating

Overview

Seat heating

Switching on

Press the button once for each tem-perature level.

The maximum temperature is reached whenthree LEDs are lit.

If the trip is continued within approx.15 minutes after a stop, seat heating is acti-vated automatically with the temperatureselected last.

When GREEN Mode is activated, refer topage 210, the heating output is reduced.

Switching off

Press and hold the button until theLEDs go out.

Safety belts

Number of safety belts and safetybelt bucklesThe vehicle is fitted with four safety beltsto ensure occupant safety. However, theycan only offer protection when adjusted cor-rectly.

Seite 74



General informationAlways make sure that safety belts are be-ing worn by all occupants before driving off.Although airbags enhance safety by provid-ing added protection, they are not a substi-tute for safety belts.

The upper shoulder strap's anchorage pointwill be correct for adult seat occupants ofevery build if the seat is correctly adjusted.

Safety information

Warning

Use of a safety belt to buckle more thanone person will potentially defeat the abil-ity of the safety belt to serve its protectivefunction. There is a risk of injuries or dan-ger to life. Do not allow more than one per-son to wear a single safety belt. Infantsand children are not allowed on an occu-pant's lap, but must be transported and se-cured in designated child restraint sys-tems.

Warning

The efficacy of safety gear, includingsafety belts, can be limited or lost whensafety belts are fastened incorrectly. Anincorrectly fastened safety belt can causeadditional injuries, for instance in theevent of an accident, braking or evasivemaneuvers. There is a risk of injuries ordanger to life. Make sure that all occu-pants are wearing safety belts correctly.

Warning

The efficacy of safety gear, includingsafety belts, may not be fully functional orfail in the following situations:

– The safety belts or safety belt bucklesare damaged, soiled, or changed inany other way.

– Belt tensioners or belt retractorswere modified.

Safety belts can be imperceptibly damagedin the event of an accident. There is a riskof injuries or danger to life. Do not modifysafety belts, safety belt buckles, belt ten-sioners, belt retractors or belt anchors andkeep them clean. Have the safety beltschecked after an accident at the dealer’sservice center or another qualified servicecenter or repair shop.

Correct use of safety belts– Wear the safety belt twist-free and tight

to your body over your lap and should-ers.

– Wear the safety belt deep on your hipsover your lap. The safety belt may notpress on your stomach.

– Do not rub the safety belt against sharpedges, or guide it or jam it in acrosshard or fragile objects.

– Avoid thick clothing.

– Re-tighten the safety belt frequently up-ward around your upper body.

Buckling the safety belt1. Guide the safety belt slowly over

shoulder and hip to put it on.

Seite 75



2. Insert the tongue plate into the safetybelt buckle. The safety belt buckle mustengage audibly.

Unbuckling the safety belt1. Hold the safety belt firmly.

2. Press the red button in the belt buckle.

3. Guide the safety belt back into its roll-up mechanism.

Belt loop

When fastening the safety belts on the rearseats, make sure that the belt loop is closed.

Safety belt reminder for driver'sseat and front passenger seat

Display in the instrument cluster

The indicator light lights up and asignal sounds. Make sure that thesafety belts are positioned correctly.

The safety belt reminder can also be acti-

vated if objects are placed on the front pas-senger seat.

Front head restraints

Safety information

Warning

A missing protective effect due to re-moved or not correctly adjusted head re-straints can cause injuries in the head andneck area. There is a risk of injury.

– Before driving, install the removedhead restraints on the occupied seats.

– Adjust the head restraint so its centersupports the back of the head at asclose to eye level as possible.

– Adjust the distance so that the headrestraint is as close as possible to theback of the head. Adjust the distancevia the backrest tilt as needed.

Warning

Body parts can be jammed when movingthe head restraint. There is a risk of injury.Make sure that the area of movement isclear when moving the head restraint.

Warning

Objects on the head restraint reduce theprotective effect in the head and neckarea. There is a risk of injury.

– Do not use seat or head restraint cov-ers.

– Do not hang objects, for instanceclothes hangers, directly on the headrestraint.

Seite 76



– Only use accessories that have beendetermined to be safe for attachmentto a head restraint.

– Do not use any accessories, for in-stance pillows, while driving.

Adjusting the height: John CooperWorks sport seatThe height of the head restraints cannot beset.

Adjusting the height



After setting the height, make sure that thehead restraint engages correctly.

Removing: John Cooper Workssport seatThe head restraints cannot be removed.

RemovingOnly remove the head restraint if no onewill be sitting in the seat in question.

1. If necessary, fold the rear seat backrestforward.

2. Pull head restraint up as far as possible.

3. Press the button, arrow 1, and pull thehead restraint out completely.

InstallingProceed in the reverse order to install thehead restraint.

Rear head restraints

Safety information

Warning

A missing protective effect due to re-moved or not correctly adjusted head re-straints can cause injuries in the head andneck area. There is a risk of injury.

– Before driving, install the removedhead restraints on the occupied seats.

– Adjust the head restraint so its centersupports the back of the head at asclose to eye level as possible.

– Adjust the distance so that the headrestraint is as close as possible to theback of the head. Adjust the distancevia the backrest tilt as needed.

Seite 77



Warning


Warning

Objects on the head restraint reduce theprotective effect in the head and neckarea. There is a risk of injury.

– Do not use seat or head restraint cov-ers.

– Do not hang objects, for instanceclothes hangers, directly on the headrestraint.

– Only use accessories that have beendetermined to be safe for attachmentto a head restraint.

– Do not use any accessories, for in-stance pillows, while driving.




After setting the height, make sure that thehead restraint engages correctly.

RemovingOnly remove the head restraint if no onewill be sitting in the seat in question.

1. Fold down the rear seat backrest, referto page 200, in question.

2. Pull head restraint up against the resist-ance.

3. Press the button, arrow 1, and pull thehead restraint out completely.

InstallingProceed in the reverse order to install thehead restraint.

Mirrors

Exterior mirrors

General informationThe mirror on the front passenger side ismore curved than the driver's side mirror.

Safety information

Warning

Objects reflected in the mirror are closerthan they appear. The distance to the traf-fic behind could be incorrectly estimated,for instance while changing lanes. There isa risk of accident. Estimate the distance to

Seite 78



the traffic behind by looking over yourshoulder.

Overview

1 Adjusting

2 Selecting a mirror, Automatic Curb Mon-itor

3 Folding in and out

Selecting a mirror

To change over to the other mirror:

Slide the switch.

Adjusting electrically

Press the button.

The mirror movement follows thebutton movement.

MalfunctionIn case of an electrical malfunction, adjustthe mirror by pressing the edges of the mir-ror glass.

Folding in and out

NOTICE

Depending on the vehicle width, the vehi-cle can be damaged in vehicle washes.There is a risk of damage to property. Be-fore washing, fold in the mirrors by handor with the button.

Press the button.

Folding is only possible up to a speed of ap-prox. 15 mph/20 km/h.

Folding the mirrors in and out is helpful inthe following situations:

– In vehicle washes.

– On narrow roads.

Mirrors that were folded in are folded outautomatically at a speed of approx.25 mph/40 km/h.

Automatic heatingBoth exterior mirrors are automaticallyheated as needed and when the ignition isswitched on.

Automatic dimming featureThe exterior mirror on the driver's side isautomatically dimmed. Photocells in thecar's interior mirror, refer to page 80, areused to control this.

Automatic Curb Monitor, exteriormirror

ConceptIf reverse gear is engaged, the mirror glasson the front passenger side is tilted down-ward. This improves your view of the curband other formatting issue - low-lying ob-stacles when parking, for instance.

Seite 79



Activating

1. slide the switch to the driver'sside mirror position.

2. Engage selector lever position R.

DeactivatingSlide the switch to the passenger's side mir-ror position.

Interior mirror, manually dimmable

Flip lever

To reduce the blinding effect of the interiormirror, flip the lever forward.

Turn knob

Turn the knob to reduce the blinding effectby the interior mirror.

Interior mirror, automatic dimmingfeature

Overview

Photocells are used for control:

– In the mirror glass.

– On the back of the mirror.

Functional requirements– Keep the photocells clean.

– Do not cover the area between the inte-rior mirror and the windshield.

Steering wheel

Safety information

Warning

Steering wheel adjustments while drivingcan lead to unexpected steering wheelmovements. Vehicle control could be lost.There is a risk of accident. Adjustng thesteering wheel while the vehicle is sta-tionary only.

Seite 80



Adjusting

1. Fold the lever down.

2. Move the steering wheel to the prefer-red height and angle to suit your seatingposition.

3. Fold the lever back up.

Seite 81



Transporting children safely



The right place for children

Safety information

Warning








Warning

A heated vehicle may result in death topersons, especially children, or animals.There is a risk of injuries or danger to life.Do not leave persons, especially children,or animals unattended in the vehicle.

Warning

Exposure to intense sunlight can causechild restraint systems and their compo-nents to become very hot. Persons maysustain burn injuries when touching thehot components. There is a risk of injury.Do not expose the child restraint system todirect sunlight or cover where necessary.If necessary, let the child restraint systemcool down before transporting a child. Donot leave children unattended in the vehi-cle.

Always transport children in therear seat

General informationAccident research shows that the safestplace for children is in the rear seat.

Transport children younger than 13 years ofage or shorter than 5 ft/150 cm only in therear seat in suitable child restraint systemsdesigned for the age, weight and size of thechild. Children 13 years of age or older mustwear a safety belt as soon as a suitable childrestraint system can no longer be used dueto their age, weight, or size.

Seite 82

CONTROLS Transporting children safely


Safety information

Warning

The safety belt cannot be fastened cor-rectly on children shorter than 5 ft,150 cm without suitable additional childrestraint systems. The efficacy of safetygear, including safety belts, can be limitedor lost when safety belts are fastened in-correctly. An incorrectly fastened safetybelt can cause additional injuries, for in-stance in the event of an accident, brakingor evasive maneuvers. There is a risk of in-juries or danger to life. Secure childrenshorter than 5 ft, 150 cm using suitablechild restraint systems.

Children on the front passengerseat

General informationBefore using a child restraint system on thefront passenger seat, ensure that the front,knee, and side airbags on the front passen-ger side are deactivated. For automatic de-activation of front-seat passenger airbags,refer to page 134.

Safety information

Warning

Active front-seat passenger airbags can in-jure a child in a child restraint systemwhen the airbags are activated. There is arisk of injury. Make sure that the front-seat passenger airbags are deactivated andthat the PASSENGER AIRBAG OFF indica-tor light lights up.

Warning

The stability of the child restraint systemis limited or compromised with incorrectseat adjustment or improper installation ofthe child seat. There is a risk of injuries ordanger to life. Make sure that the child re-straint system fits securely against thebackrest. If possible, adjust the backresttilt for all affected backrests and correctlyadjust the seats. Make sure that seats andbackrests are securely engaged or locked.If possible, adjust the height of the headrestraints or remove them.

Installing child restraint sys-tems

General informationPay attention to the specifications of thechild restraint system manufacturer whenselecting, installing, and using child re-straint systems.

In order to facilitate the installation of aback-facing child restraint system in therear:

Move the front passenger seat as far up aspossible before folding down the backrest.

Safety information

Warning

The protective effect of child restraint sys-tems and their fastening systems whichhave been damaged or exposed to an acci-dent can be limited or lost. A child cannotbe properly restrained in the event of anaccident, braking or evasive maneuvers.There is a risk of injuries or danger to life.

Seite 83

Transporting children safely CONTROLS


Do not use child restraint systems whichhave been damaged or exposed to an acci-dent.

If a child restraint system and its fasten-ing system has been damaged or exposedto an accident, have these systemschecked and replaced by the dealer's serv-ice center or another qualified service cen-ter or repair shop.

Warning


On the rear seatsIn order to facilitate the installation of aback-facing child restraint system:

Move the front passenger seat as far up aspossible before folding down the backrest.

On the front passenger seat

Deactivating airbags

Warning

Active front-seat passenger airbags can in-jure a child in a child restraint systemwhen the airbags are activated. There is arisk of injury. Make sure that the front-seat passenger airbags are deactivated and

that the PASSENGER AIRBAG OFF indica-tor light lights up.

Before installing a child restraint system inthe front passenger seat, make sure that thefront, knee and side airbags on the frontpassenger side are deactivated.

Deactivate the front-seat passenger airbagsautomatically, refer to page 134.

Seat position and heightBefore installing a child restraint system,move the front passenger seat as far back aspossible and adjust its height to the highestand thus best possible position for the beltand to offer optimal protection in the eventof an accident.

If the upper anchorage of the safety belt islocated in front of the belt guide of the childseat, move the front passenger seat care-fully forward until the best possible beltguide position is reached.

Child seat security

The rear safety belts and the front passen-ger safety belt can be permanently locked tofasten child restraint systems.

Locking the safety belt1. Pull out the belt strap completely.

2. Secure the child restraint system withthe safety belt.

Seite 84

CONTROLS Transporting children safely


3. Allow the belt strap to be pulled in andpull it tight against the child restraintsystem. The safety belt is locked.

Unlocking the safety belt1. Unbuckle the safety belt buckle.

2. Remove the child restraint system.

3. Allow the belt strap to be pulled in com-pletely.

LATCH child restraint fixingsystem

General informationLATCH: Lower Anchors and Tether for Chil-dren.

Pay attention to the operating and safety in-formation from the child restraint systemmanufacturer when installing and usingLATCH child restraint fixing systems.

Mounts for the lower LATCHanchorsThe lower anchors may be used to attachthe CRS to the vehicle seat up to a com-bined child and CRS weight of 65 lbs/30 kgwhen the child is restrained by the internalharnesses.

Safety information

Warning

If the LATCH child restraint fixing sys-tems are not correctly engaged, the protec-tive effect of the LATCH child restraintfixing system can be limited. There is arisk of injuries or danger to life. Make surethat the lower anchors are securely en-gaged and that the LATCH child restraint

fixing system fits securely against thebackrest.

Position

Symbol Meaning

The corresponding symbolshows the mounts for thelower LATCH anchors.

Seats equipped with loweranchors are marked with apair, (2), of LATCH symbols.

Before installing LATCH childrestraint fixing systemsPull the safety belt away from the area ofthe child restraint system.

Assembly of LATCH child restraintfixing systems1. Install child restraint system, see manu-

facturer's information.

2. Ensure that both LATCH anchors areproperly engaged.

Upper LATCH retaining strapFor Canadian customers only.

The following statement is required byTransport Canada:

This vehicle is not equipped with user-ready tether anchorages. As such neither achild restraint system, nor a booster cush-ion, requiring the use of a tether strap canbe properly secured in the vehicle.

Seite 85

Transporting children safely CONTROLS


Driving



Start/Stop button

ConceptPressing the Start/Stop buttonswitches the ignition on or offand starts the engine.

Steptronic transmission: theengine starts in selector lever

position P or N with the brake pedal pressedwhen you press the Start/Stop button.

Manual transmission: the engine starts withthe clutch pedal pressed when the Start/Stop button is pressed.

Ignition onManual transmission: press the Start/Stopbutton without stepping on the clutchpedal.

Steptronic transmission: press the Start/Stop button, but do not press on the brakepedal at the same time.

All vehicle systems are ready for operation.

Most of the indicator/warning lights in theinstrument cluster light up for a variedlength of time.

To save battery power when the engine isoff, switch off the ignition and any unneces-sary electronic systems/power consumers.

Ignition offManual transmission: press the Start/Stopbutton again without stepping on the clutchpedal.

Steptronic transmission: shift to selectorlever position P, press the Start/Stop buttonagain without stepping on the brake.

All indicator lights in the instrument clustergo out.

To save battery power when the engine isoff, switch off the ignition and any unneces-sary electronic systems/power consumers.

Safety measuresThe ignition is switched off automatically inthe following situations while the vehicle isstationary and the engine is off:

– When locking the vehicle, even if thelow beams are switched on.

– Shortly before the battery is dischargedcompletely, so that the engine can stillbe started. This function is only availa-ble when the low beams are switchedoff.

– When opening or closing the driverdoor, if the driver's safety belt is un-buckled and the low beams are switchedoff.

– While the driver's safety belt is unbuck-led with driver's door open and lowbeams off.

– When the front doors are opened ifthere is no other person sitting in thefront seats.

Seite 86

CONTROLS Driving


– The low beams switch to parking lightsafter some minutes of no use.

Steptronic transmission with a tap-operatedselector lever, refer to page 101: whenswitching off the ignition, the selector leverposition P is engaged automatically if theselector lever position R, D or M/S is en-gaged.

Radio-ready state

General informationIn the radio-ready state, certain power con-sumers remain ready for operation.

ActivatingWith the engine running, press the Start/Stop button.

If the engine is not running and the ignitionis switched on: the system automatically ac-tivates radio-ready state when the door isopened if the lights are switched off or thedaytime running lights are switched on.

Radio-ready state remains active if, for in-stance the ignition is automaticallyswitched off for the following reasons:

– Opening or closing the driver's door.

– Unfastening of the driver's safety belt.

– When automatically switching from lowbeams to parking lights.

Switching off automaticallyThe radio-ready state is switched off auto-matically in the following situations:

– If the driver's or front passenger door isopened when exiting the vehicle, withthe engine switched off manually.

– If the ignition is switched off manuallywith the Start/Stop button.

– After approx. 8 minutes.

– When the vehicle is locked using thecentral locking system.

– Shortly before the battery is dischargedcompletely, so that the engine can stillbe started.

Starting the engine

Safety information

DANGER

If the exhaust pipe is blocked or ventila-tion is insufficient, harmful exhaust gasescan enter into the vehicle. The exhaustgases contain pollutants which are color-less and odorless. In enclosed areas, ex-haust gases can also accumulate outside ofthe vehicle. There is danger to life. Keepthe exhaust pipe free and ensure sufficientventilation.

Warning

An unsecured vehicle can begin to moveand possibly roll away. There is a risk ofaccident. Before exiting, secure the vehi-cle against rolling.

In order to ensure that the vehicle is se-cured against rolling away, follow the fol-lowing:

– Set the parking brake.

– On uphill grades or on a downhillslope, turn the front wheels in the di-rection of the curb.

– On uphill grades or on a downhillslope, also secure the vehicle, for in-stance with a wheel chock.

NOTICE

In the case of repeated starting attemptsor repeated starting in quick succession,the fuel is not burned or is inadequatelyburned. The catalytic converter can over-

Seite 87

Driving CONTROLS


heat. There is a risk of damage to property.Avoid repeated starting in quick succes-sion.

Gasoline engineDepending on the motorization, the fulldrive power may not be available for ap-proximately 30 seconds after starting theengine. In this case, the vehicle will not ac-celerate as usual.


Starting the engine1. Depress the brake pedal.

2. Engage selector lever position P or N.


The ignition is activated automatically for abrief time and is stopped as soon as the en-gine starts.

Manual transmission

Starting the engine1. Depress the brake pedal.

2. Press on the clutch pedal and shift toneutral.


The ignition is activated automatically for abrief time and is stopped as soon as the en-gine starts.

Engine stop

Safety information

Warning








Warning






Seite 88

CONTROLS Driving



Switching off the engine1. When the vehicle is stationary, apply

the parking brake.



The engine is switched off.

The radio-ready state is switched on.

Manual transmission

Switching off the engine1. With the vehicle at a standstill, press

the Start/Stop button.

The engine is switched off.

The radio-ready state is switched on.



Auto Start/Stop function

ConceptThe Auto Start/Stop function helps savefuel. The system switches off the engineduring a stop, for instance in traffic conges-tion or at traffic lights. The ignition remainsswitched on. The engine starts automati-cally for driving off.

After each engine start using the Start/Stopbutton, the Auto Start/Stop function isready and is activated at speeds faster thanabout 3 mph/5 km/h.

Depending on the selected driving mode, re-fer to page 155, the system is automaticallyactivated or deactivated.

Engine stop

Functional requirementsThe engine is switched off automaticallyduring a stop under the following condi-tions:

Manual transmission:

– Neutral is engaged and the clutch pedalis not pressed.

– The driver's safety belt is buckled or thedriver's door is closed.

Steptronic transmission:

– The selector lever is in selector lever po-sition D.

– The brake pedal remains depressedwhile the vehicle is stopped.

– The driver's safety belt is buckled or thedriver's door is closed.

In order to be able to release the brakepedal, engage the selector lever in positionP. The engine remains off.

To continue driving depress the brakepedal. When a gear is engaged, the enginestarts automatically.

The air flow from the air conditioner is re-duced when the engine is switched off.

Displays in the instrument cluster

Instrument cluster without enhancedfeatures: display

The display indicates that theAuto Start/Stop function isready for an Automatic enginestart.

The display indicates that theconditions for an automaticengine stop have not beenmet.

Seite 89

Driving CONTROLS


Functional limitationsThe engine is not switched off automaticallyin the following situations:

– External temperature too low.

– The external temperature is high and au-tomatic climate control is running.

– The car's interior has not yet beenheated or cooled to the required level.

– The engine is not yet at operating tem-perature.

– The wheels are at a sharp angle or thesteering wheel is being turned.

– After driving in reverse.

– Fogging of the windows when the auto-matic climate control is switched on.

– The vehicle battery charge is very low.

– At higher elevations.

– The hood is unlocked.

– The parking assistant is activated.

– Stop-and-go traffic.

– Selector lever in selector lever positionR, N or M/S.

Starting the engineThe engine starts automatically under thefollowing conditions:

– Manual transmission: clutch pedal ispressed.

– Steptronic transmission: by releasingthe brake pedal.

After the engine starts, accelerate as usual.

Safety modeAfter the engine switches off automatically,it will not start again automatically if anyone of the following conditions are met:

– The driver's safety belt is unbuckled andthe driver's door is open.

– The hood was unlocked.

Some indicator lights light up for a variedlength of time.

The engine can only be started via theStart/Stop button.

Functional limitationsEven if driving off was not intended, the de-activated engine starts up automatically inthe following situations:

– Excessive warming of the car's interiorwhen the air conditioning is switchedon.

– When the steering wheel is turned.

– Steptronic transmission: change fromselector lever position D to R, N or M/S.

– Steptronic transmission: change fromselector lever position P to R, N, D orM/S.

– The vehicle begins rolling.

– Fogging of the windows when the auto-matic climate control is switched on.

– The vehicle battery charge is very low.

– Excessive cooling of the car's interiorwhen the heating is switched on.

– Manual transmission: low brake vacuumpressure; this can occur, for instance ifthe brake pedal is depressed a numberof times in succession.

Additional Auto Start/StopfunctionDepending on the vehicle equipment andcountry-specific version, the vehicle fea-tures a variety of sensors for assessing thetraffic situation. The Auto Start/Stop func-tion uses this information to adapt to vari-ous traffic situations in a proactive manner.

For instance, this applies to the followingsituations:

– When a situation is detected in whichthe stopping time is expected to be veryshort, the engine is not switched off au-

Seite 90

CONTROLS Driving


tomatically. A message appears on theControl Display, depending on the situa-tion.

– When a situation is detected in whichthe vehicle needs to drive off immedi-ately, the engine is started automati-cally.

The function may be restricted if the navi-gation data is invalid, outdated or not avail-able, for example.

Switching the system on/off

Using the button

Press the button.

– LED comes on: auto Start/Stop functionis deactivated.

The engine is started during an auto-matic engine stop.

The engine can only be stopped orstarted via the Start/Stop button.

– LED goes out: auto Start/Stop functionis activated.

Switching off the vehicle during anautomatic engine stopDuring an automatic engine stop, the vehi-cle can be switched off permanently, for in-stance when leaving it.



2. Press the Start/Stop button. The ignitionis switched off. The Auto Start/Stopfunction is deactivated.



1. Press the Start/Stop button. The ignitionis switched off. The Auto Start/Stopfunction is deactivated.



Engine start as usual via Start/Stop button.

Automatic deactivationIn certain situations, the Auto Start/Stopfunction is deactivated automatically forsafety reasons, for instance if no driver isdetected.

MalfunctionThe Auto Start/Stop function no longerswitches off the engine automatically. ACheck Control message is displayed. It ispossible to continue driving. Have the sys-tem checked by a dealer's service center oranother qualified service center or repairshop.

Parking brake

Safety information

Warning




Seite 91

Driving CONTROLS




ApplyingThe lever automatically engages after beingpulled up.

The indicator light lights up red. Theparking brake is set.

Lower light: indicator light in Cana-dian models

If for once use during driving is required,engage the parking brake slightly and holdthe button down.

To prevent corrosion and one-sided brakeaction, lightly apply the parking brake peri-odically while coasting, if traffic conditionspermit.

The brake lights will not light up if the park-ing brake is set.

Releasing

Raise lever slightly, press the button andguide the lever down.

Turn signal, high beams, head-light flasher

Turn signal

Using turn signals

Press the lever past the resistance point.

Canada: the lever returns into its startingposition after actuation. To switch off man-ually, slightly tap the lever to the resistancepoint.

Triple turn signal activationLightly tap the lever up or down.

The triple turn signal duration can be ad-justed.


1. "My MINI"


3. "Lighting"

4. "Exterior lighting"

5. "One-touch turn signal"


Settings are stored for the profile currentlyused.

Signaling brieflyPress the lever to the resistance point andhold it there for as long as you want theturn signal to flash.

Seite 92

CONTROLS Driving


MalfunctionUnusually rapid flashing of the indicatorlight indicates that a turn signal bulb hasfailed.

High beams, headlight flasherPush the lever forward or pull it backward.

– High beams on, arrow 1.

The high beams light up when the lowbeams are switched on.

– High beams off/headlight flasher, ar-row 2.

Wiper system

General informationDo not use the wipers if the windshield isdry, as this may damage the wiper blades orcause them to become worn more quickly.

Safety information

Warning

If the wipers start moving in the foldedaway state, body parts can be jammed ordamage may occur to parts of the vehicle.There is a risk of injury or risk of damageto property. Make sure that the vehicle isswitched off when the wipers are in thefolded away state and the wipers arefolded in when switching on.

NOTICE

If the wipers are frozen to the windshield,the wiper blades can be torn off and thewiper motor can overheat when switchingon. There is a risk of damage to property.Defrost the windshield prior to switchingthe wipers on.

Switching on

Press the lever up until the desired positionis reached.

– Resting position of the wipers, posi-tion 0.

– Intermittent operation or rain sensor,position 1.

– Normal wiper speed, position 2.

– Fast wiper speed, position 3.

When travel is interrupted with the wipersystem switched on: when travel continues,the wipers resume at their previous speed.

Switching off and brief wipe

Seite 93

Driving CONTROLS



– Switching off: press the lever down untilit reaches its standard position.

– Brief wipe: press the lever down fromthe standard position.

The lever automatically returns to its in-itial position when released.

Interval mode or rain sensor

ConceptThe rain sensor automatically controls thetime between wipes depending on the in-tensity of the rainfall.

General informationThe sensor is located on the windshield, di-rectly in front of the interior mirror. With-out the rain sensor, the frequency of thewiper operation is preset.

Safety information

NOTICE

If the rain sensor is activated, the wiperscan accidentally start moving in vehiclewashes. There is a risk of damage to prop-erty. Deactivate the rain sensor in vehiclewashes.

Activating

Press the lever up once from its standardposition, arrow 1.

Wiping is started.

The LED in the wiper lever is illuminated.

In frosty conditions, wiper operation maynot start.

DeactivatingPress the lever back into the standard posi-tion.

Setting the frequency or sensitivity ofthe rain sensor

Turn the thumbwheel.

With deactivated rain sensor: set the inter-val.

With activated rain sensor: set the rain sen-sor sensitivity.

Up: short interval or high sensitivity of therain sensor.

Down: long interval or low sensitivity of therain sensor.

Windshield washer system

Safety information

Warning

The washer fluid can freeze onto the win-dow at low temperatures and obstruct theview. There is a risk of accident. Only usethe washer systems, if the washer fluid

Seite 94

CONTROLS Driving


cannot freeze. Use washer fluid with anti-freeze, if needed.

NOTICE

When the washer fluid reservoir is empty,the wash pump cannot work as intended.There is a risk of damage to property. Donot use the washer system when thewasher fluid reservoir is empty.


Pull the lever.

The system sprays washer fluid on thewindshield and activates the wipers briefly.

Windshield washer nozzlesThe washer jets are automatically heatedwhenever the ignition is switched on.

Fold-away position of the wipers

ConceptThe fold-away position enables the wipersto be folded away from the windshield.

General informationHelpful when changing the wiper blades orunder frosty conditions, for instance.

Safety information

Warning


NOTICE


Folding away the wipers1. Switch the ignition on and off again.

2. Press and hold the wiper lever down, un-til the wipers stop in a close to verticalposition.

Seite 95

Driving CONTROLS


3. Fold the wipers all the way away fromthe windshield.

Folding down the wipersAfter the wipers are folded back down, thewiper system must be reactivated.

1. Fold the wipers back down onto thewindshield.

2. Switch on the ignition.

3. Push wiper lever down. Wipers returnto their resting position and are readyagain for operation.

Canada: wiper system

General informationDo not use the wipers if the windshield isdry, as this may damage the wiper blades orcause them to become worn more quickly.

Safety information

Warning


NOTICE


Switching on

Tap up the lever or press it past the resist-ance point.

– Normal wiper speed: tap up once.

– Fast wiper speed: tap up twice or taponce beyond the resistance point.

The lever automatically returns to its initialposition when released.

Switching off and brief wipe


– To switch off from fast wiper speed:press down twice.

Seite 96

CONTROLS Driving


– To switch off from normal wiper speed:press down once.

– Brief wipe: press down once.

The lever automatically returns to its initialposition when released.

Interval mode or rain sensor

ConceptThe rain sensor automatically controls thetime between wipes depending on the in-tensity of the rainfall.

General informationThe sensor is located on the windshield, di-rectly in front of the interior mirror. With-out the rain sensor, the frequency of thewiper operation is preset.

Safety information

NOTICE

If the rain sensor is activated, the wiperscan accidentally start moving in vehiclewashes. There is a risk of damage to prop-erty. Deactivate the rain sensor in vehiclewashes.


Press the button on the wiper lever.

Wiping is started.

If the vehicle is equipped with a rain sensor:the LED in the wiper lever is illuminated.

In frosty conditions, wiper operation maynot start.

If a journey is interrupted with the rain sen-sor switched on: if the trip is resumedwithin approx. 15 minutes, the rain sensoris automatically activated again.

Setting the frequency or sensitivity ofthe rain sensor

Turn the thumbwheel.

With deactivated rain sensor: set the inter-val.

With activated rain sensor: set the rain sen-sor sensitivity.

Up: short interval or high sensitivity of therain sensor.

Down: long interval or low sensitivity of therain sensor.

Windshield washer system

Safety information

Warning

The washer fluid can freeze onto the win-dow at low temperatures and obstruct theview. There is a risk of accident. Only usethe washer systems, if the washer fluidcannot freeze. Use washer fluid with anti-freeze, if needed.

Seite 97

Driving CONTROLS


NOTICE

When the washer fluid reservoir is empty,the wash pump cannot work as intended.There is a risk of damage to property. Donot use the washer system when thewasher fluid reservoir is empty.


Pull the lever.

The system sprays washer fluid on thewindshield and activates the wipers briefly.

Windshield washer nozzlesThe washer jets are automatically heatedwhenever the ignition is switched on.

Fold-away position of the wipers

ConceptThe fold-away position enables the wipersto be folded away from the windshield.

General informationHelpful when changing the wiper blades orunder frosty conditions, for instance.

Safety information

Warning


NOTICE


Folding away the wipers1. Switch the ignition on and off again.

2. Press the wiper lever up past the pointof resistance and hold it for approx.3 seconds, until the wipers remain in anearly vertical position.

Seite 98

CONTROLS Driving


3. Fold the wipers all the way away fromthe windshield.

Folding down the wipersAfter the wipers are folded back down, thewiper system must be reactivated.

1. Fold the wipers back down onto thewindshield.


3. Push wiper lever down. Wipers returnto their resting position and are readyagain for operation.

Washer fluid

General informationAll washer nozzles are supplied from onereservoir.

Use a mixture of tap water and windshieldwasher concentrate. If desired, a windshieldwasher concentrate containing antifreezecan be used.

Recommended minimum fill quantity:0.2 US gal/1 liter.

Safety information

Warning

Some antifreeze agents can contain harm-ful substances and are flammable. There isa risk of fire and a risk of injury. Followthe instructions on the containers. Keepantifreeze away from ignition sources. Donot refill operating materials into differentbottles. Store operating materials out ofreach of children.

United States: the washer fluid mixture ra-tio is regulated by the U.S. EPA and manyindividual states; do not exceed the allow-able washer fluid dilution ratio limits thatapply. Follow the usage instructions on thewasher fluid container.

Use of BMW’s Windshield Washer Con-centrate or the equivalent is recom-mended.

Warning

Washer fluid can ignite and catch fire oncontact with hot engine parts. There is arisk of injury or risk of damage to prop-erty. Only add washer fluid when the en-gine is cooled down. Next, fully close thelid of the washer fluid reservoir.

NOTICE

Silicon-containing additives in the washerfluid for the water-repelling effect on thewindows can lead to damage to the wash-ing system. There is a risk of damage toproperty. Do not add silicon-containing ad-ditives to the washer fluid.

Seite 99

Driving CONTROLS


NOTICE

Mixing different windshield washer con-centrates or antifreeze can damage thewashing system. There is a risk of damageto property. Do not mix different wind-shield washer concentrates or antifreeze.Follow the information and mixing ratiosprovided on the containers.

Overview

The washer fluid reservoir is located in theengine compartment.

MalfunctionThe use of undiluted windshield washerconcentrate or alcohol-based antifreeze canlead to incorrect readings at temperaturesbelow +5 ℉/-15 ℃.

Manual transmission

Safety information

Warning






NOTICE

When shifting to a lower gear, excessivespeeds can damage the engine. There is arisk of damage to property. When shiftinginto 5th or 6th gear, press the gearshiftlever to the right.

Schematic diagram

– 1–6: forward gears.

– R: reverse gear.

Shifting

General informationDepending on the engine installation, theengine speed during a shifting operation isadjusted automatically as required for har-monious and dynamic gear shifting.

Reverse gearSelect only when the vehicle is stationary.

To overcome the resistance push the gear-shift lever dynamically to the left and en-

Seite 100

CONTROLS Driving


gage reverse gear with a forward shiftingmovement.

Rolling or pushing the vehicleIn some situations, the vehicle is to rollwithout its own power, for instance in a carwash, or be pushed.


2. Press on the clutch pedal and shift outof a forward gear or reverse.

3. Release the parking brake.


ConceptThe Steptronic transmission combines thefunctions of an automatic transmission withthe possibility of manual shifting, if needed.

Safety information

Warning






Selector lever version

General informationDepending on the vehicle equipment, atransmission with either a latching selectorlever or a tap-operated selector lever is in-stalled.

Transmission with a latching selectorlever

The selector lever positions P, R, N, and Dare selected by moving the selector leverinto the respective selector lever position.The selector lever engages in the selectorlever positions.

Transmission with a tap-operatedselector lever

The selector lever positions R, N, and D areselected by tapping the selector lever for-ward or back. The selector lever automati-cally returns to the center position when re-leased.

The selector lever position P is engaged bypressing the P button on the selector lever

Seite 101

Driving CONTROLS


or, in certain situations, automatically, referto page 102.

Selector lever positions

Drive mode DSelector lever position for normal vehicleoperation. All gears for forward travel areactivated automatically.

R is reverseEngage selector lever position R only whenthe vehicle is stationary.

Neutral NThe vehicle may be pushed or roll withoutengine power in selector lever position N,for instance in vehicle washes, refer topage 104.

Parking position P

General information

Selector lever position, for instance forparking the vehicle.

The transmission blocks the drive wheels inselector lever position P.

Engage selector lever position P only whenthe vehicle is stationary.

Before exiting the vehicle, make sure thatselector lever position P is set. Otherwise,the vehicle may begin to move.

Automatic parking position for atransmission with a tap-operated selectorlever

Selector lever position P is engaged auto-matically in situations such as the follow-ing:

– After the engine is switched off whenthe vehicle is in the radio-ready state,refer to page 87, or when the ignition isswitched off, refer to page 86, while se-

lector lever position R, D or M/S is en-gaged.

– If the driver's safety belt is unbuckled,the driver's door is opened, and thebrake pedal is not pressed while the ve-hicle is stationary and selector lever po-sition D, M/S or R is engaged.

– After the ignition has been switched offwhile selector lever position N is en-gaged.

Engaging selector lever positions:with a latching selector lever

General informationTo prevent the vehicle from creeping afteryou select a drive mode, maintain pressureon the brake pedal until you are ready tostart.

Functional requirementsThe selector lever can only be taken out ofselector lever position P if the ignition is onor the engine is running.

Engaging selector lever position D, N,R, or PWith the vehicle stationary, depress thebrake pedal before shifting out of selectorlever position P or N; otherwise, the shiftblock will not be deactivated and the shiftcommand will not be executed.

A selector lever lock prevents the followingfaulty operation:

– Unintentional shifting into selectorlever position P or R.

Seite 102

CONTROLS Driving


– Unintentional shifting from selectorlever position P into another selectorlever position.

1. To release the selector lever lock: withthe brake pedal depressed, press thebutton on the front of the selector lever.

2. Move the selector lever into the desiredposition.

Engaging selector lever positions:with a tap-operated selector lever

General informationTo prevent the vehicle from creeping afteryou select a drive mode, maintain pressureon the brake pedal until you are ready tostart.

Functional requirementsOnly when the brake pedal is depressed is itpossible to change from selector lever posi-tion P to another selector lever position.

Depending on the transmission version, theengine may have to be running too.

The selection lever position P cannot bechanged until all technical requirements aremet.

Engaging selector lever position D, N,RA selector lever lock prevents the followingfaulty operation:

– Unintentional shifting into selectorlever position R.

– Unintentional shifting from selectorlever position P into another selectorlever position.

1. Press and hold the button to release theselector lever lock.

2. With the driver's safety belt fastened,briefly push the selector lever in the de-sired direction, past a resistance point,if needed. The selector lever automati-cally returns to the center position whenreleased.

Seite 103

Driving CONTROLS


Engaging selector lever position P

Press button P.

Rolling or pushing the vehicle

General informationIn some situations, the vehicle is to rollwithout its own power for a short distance,for instance in a car wash, or be pushed.

Engaging selector lever position N:with a latching selector lever1. Switch on the ignition.

2. If necessary, release the parking brake.


4. Touch the selector lever lock and en-gage selector lever position N.

5. Release brake.

The vehicle can roll.

If there is a malfunction, you may not beable to change the selector lever position.

Manually unlock the transmission lock, ifneeded, refer to page 106.

Engaging selector lever position N:with a tap-operated selector lever1. Start the engine while pressing on the

brake pedal.

2. If necessary, release the parking brake.


4. Touch the selector lever lock and en-gage selector lever position N.

5. Switch the engine off.

In this way, the ignition remainsswitched on, and a Check Control mes-sage is displayed.

The vehicle can roll.

NOTICE

Selector lever position P is automaticallyengaged when the ignition is switched off.There is a risk of damage to property. Donot switch ignition off in vehicle washes.

Irrespective of the ignition, the selectorlever position P is automatically engaged af-ter approx. 15 minutes.

If there is a malfunction, you may not beable to change the selector lever position.

Electronically unlock the transmission lock,if needed, refer to page 107.

KickdownKickdown is used to achieve maximum driv-ing performance. Step on the acceleratorpedal beyond the resistance point at the fullthrottle position.

Sport program M/S

ConceptThe shifting points and shifting times in theSport program are designed for a sportierdriving style. The transmission, for instanceshifts up later and the shifting times areshorter.

Seite 104

CONTROLS Driving


Activating the Sport program

Press the selector lever to the left from se-lector lever position D.

The engaged gear is displayed in the instru-ment cluster, for instance S1.

The sport program of the transmission is ac-tivated.

Ending the Sport programPush the selector lever to the right.

D is displayed in the instrument cluster.

Manual mode M/S

ConceptManual gear-shifting is possible in manualmode.

Activating manual mode1. Press the selector lever to the left from

selector lever position D, arrow 1.

2. Push the selector lever forward or pull itbackward, arrows 2.

Manual mode M/S becomes active and thegear is changed.

The engaged gear is displayed in the instru-ment cluster, for instance M1.

Shifting– To shift down: press the selector lever

forward.

– To shift up: pull the selector lever rear-wards.

The Steptronic transmission continuesshifting automatically in certain situations,for instance when certain engine speed lim-its are reached.

With a tap-operated selector lever: whenM2 is set manually while the vehicle is sta-tionary, the transmission will no longershift back to M1. This shifting behavior isretained until you engage M1 manually orexit M.

Avoiding automatic upshiftingOnce a particular engine speed is attained,M/S manual mode is automatically up-shifted as needed.

John Cooper Works: once particular enginespeeds are attained, upshifting is not auto-matically performed in M/S manual mode.

For vehicles with Steptronic Sport transmis-sion, automatic shift operations are not per-formed if one of the following conditions ismet:

– DSC is deactivated.

– TRACTION is activated.

In addition, there is no downshifting forkickdown.

With the appropriate transmission version,the lowest possible gear can be selected bysimultaneously activating kickdown and op-erating the left shift paddles. This is notpossible by switching briefly via the shiftpaddles from selector lever position D tomanual mode M/S.

Seite 105

Driving CONTROLS


Ending the manual modePush the selector lever to the right.

D is displayed in the instrument cluster.

Shift paddles for Steptronic Sporttransmission

ConceptThe shift paddles on the steering wheel al-low you to shift gears quickly while keepingboth hands on the steering wheel.

General information

Shifting

Gears will only be shifted at appropriate en-gine and road speeds, for instance down-shifting is not possible if the engine speedis too high.

Short-term manual mode

In selector lever position D, actuating ashift paddle switches into manual modetemporarily.

After conservative driving in manual modewithout acceleration or shifting via the shiftpaddles for a certain amount of time, thetransmission switches back to automaticmode.

It is possible to switch into automatic modeas follows:

– Keep the right shift paddle pulled untilD is displayed in the instrument cluster.

– In addition to the pulled right shift pad-dle, pull the left shift paddle.

Continuous manual mode

In selector lever position S, actuating a shiftpaddle switches into manual mode perma-nently.

Shifting

– Shifting up: pull the right shift paddle.

– Shifting down: pull left shift paddle.

– Downshifting to the lowest possiblegear: keep the left shift paddle pulled.

The selected gear is briefly displayed in theinstrument cluster, followed by the currentgear.

Displays in the instrument clusterThe selector lever position isdisplayed, for example P.

Releasing the transmission lockmanually: with a latching selectorleverIf the selector lever is locked in selectorlever position P despite the ignition beingswitched on, the brake pedal being de-pressed and the button on the selector leverbeing pressed, the transmission lock can beunlocked manually:

Before unlocking the transmission lockmanually, engage the parking brake force-fully to prevent the vehicle from rollingaway.

1. Loosen the selector lever sleeve, to-gether with the lower retaining ring,from the center console. To do so, pull

Seite 106

CONTROLS Driving


the retaining ring upward at the rearedge.

2. Lift the sleeve. Unplug the cable connec-tor, if needed.

3. Using the screwdriver from the onboardvehicle tool kit, refer to page 276, pressthe yellow release lever downward, seearrow.

4. Press the button on the front of the se-lector lever and move the selector leverback slightly.

Release the release lever.

5. Bring the selector lever into the desiredposition.

For additional information, see the chapteron tow-starting and towing.

Releasing the transmission lockelectronically: with a tap-operatedselector lever

General informationElectronically unlock the transmission lockto maneuver vehicle from a danger area.

Before unlocking the transmission lock, setthe parking brake to prevent the vehiclefrom rolling away.

Engaging selector lever position NUnlocking is possible, if the starter can spinthe engine.

1. Press and hold down brake pedal.

2. Press the Start/Stop button. The startermust audibly start.

3. Press the button on the selector lever,arrow 1, and press and hold the selectorlever into selector lever position N, ar-row N, until selector lever position N isdisplayed in the instrument cluster.

A Check Control message is displayed.

4. Release the selector lever.

5. Release brake, as soon as the starterstops.

6. Maneuver the vehicle from the dangerarea and secure it against moving on itsown.

For additional information, see the chapteron tow-starting and towing.

Steptronic Sport transmission:Launch Control

ConceptLaunch Control enables optimum accelera-tion on surfaces with good traction underdry surrounding conditions.

Seite 107

Driving CONTROLS


General informationThe use of Launch Control causes prema-ture component wear since this functionrepresents a very heavy load for the vehicle.

Do not use Launch Control during thebreak-in, refer to page 204, period.

Do not turn the steering wheel when driv-ing away with Launch Control.

Functional requirementsLaunch Control is available as soon as theengine and transmission are at operatingtemperature.

Depending on the external temperature anddriving style, the engine and transmissionrequire an interrupted trip of up to30 miles/50 km in order to reach the oper-ating temperature needed for Launch Con-trol.

Start with launch controlWhile the engine is running:

1. Press button and select SPORTwith the MINI Driving Modes switch.

The instrument cluster displays TRAC-TION in combination with SPORT. TheDSC OFF indicator light lights up.

2. Engage selector lever position S.

3. With the left foot, forcefully press downon the brake.

4. Press and hold down the acceleratorpedal beyond the resistance point at thefull throttle position, kickdown.

A flag symbol is displayed in the instru-ment cluster.

5. The starting engine speed adjusts. Waitbriefly until the engine speed is con-stant. Keep accelerator pedal in this po-sition.

6. Release the brake within 3 seconds afterthe flag symbol illuminates.

The vehicle accelerates.

Upshifting occurs automatically as longas the flag symbol is displayed and theaccelerator pedal is not released.

Repeated use during a tripAfter Launch Control has been used, thetransmission must cool down for approx.5 minutes before Launch Control can beused again.

After using Launch ControlTo increase vehicle stability, activate DSCDynamic Stability Control again.

System limitsAn experienced driver may be able to ach-ieve better acceleration values in DSC OFFmode.

Seite 108

CONTROLS Driving


Displays




Instrument cluster

Instrument cluster without enhanced features: overview

1 Tachometer 114

2 Indicator/warning lights

3 Speedometer

4 Fuel gauge 114

5 Display/reset miles 114

6 Electronic displays 110

Seite 109

Displays CONTROLS


Instrument cluster without additional functions: electronic displays

1 Driver assistance systems

Messages, for instance Check Control

Time 115

External temperature 115

Selection lists 119

Total miles/trip odometer 114

Onboard Computer 119

2 Selector lever position 101

Gear shift indicator 117

3 MINI Driving Modes switch sta-tus 155

Check Control

ConceptThe Check Control system monitors func-tions in the vehicle and notifies you of mal-functions in the monitored systems.

General informationA Check Control message is displayed as acombination of indicator or warning lightsand text messages in the instrument cluster.

In addition, an acoustic signal may be out-put and a SMS text message may appear onthe Control Display.


General informationThe indicator/warning lights can light up ina variety of combinations and colors.

Several of the lights are checked for properfunctioning and light up temporarily whenthe engine is started or the ignition isswitched on.

Seite 110

CONTROLS Displays


Red lights

Safety belt reminder

Indicator light flashes or is illumi-nated: safety belt on the driver orpassenger side is not buckled. The

safety belt reminder can also be activated ifobjects are placed on the front passengerseat.

Make sure that the safety belts are posi-tioned correctly.

Airbag system

Airbag system and belt tensionermay not be working.

Have the vehicle checked immedi-ately by a dealer's service center or anotherqualified service center or repair shop.

Parking brake

The parking brake is set.

For releasing the parking brake, re-fer to page 92.

Approach control warning

Indicator light illuminates: advancewarning is issued, for example whenthere is the impending danger of a

collision or the distance to the vehicleahead is too small.

Increase the distance.

Indicator light flashes: acute warning of theimminent danger of a collision when the ve-hicle approaches another vehicle at a rela-tively high differential speed.

Intervene by braking or make an evasivemaneuver.

Person warning

If a collision with a detected personis imminent, the symbol lights upand a signal sounds.

Instrument cluster without enhancedfeatures: orange lights

Active Cruise Control

The number bars shows the selecteddistance from the vehicle drivingahead.

Camera-based cruise control, refer topage 158.

Vehicle detection, Active Cruise Control

Indicator light illuminates: a vehiclehas been detected ahead of you.

Indicator light flashes: the condi-tions are not adequate for the system towork.

The system was deactivated but applies thebrakes until the driver actively resumescontrol of the vehicle by pressing on thebrake pedal or accelerator pedal.

Yellow lights

Antilock Braking System ABS

The Brake Assistant function maynot activate. Avoid abrupt braking.Take the longer braking distanceinto account.

Have the system immediatelychecked by a dealer's service center

or another qualified service center or repairshop.

Seite 111

Displays CONTROLS


DSC Dynamic Stability Control

The indicator light flashes: DSC con-trols the drive and braking forces.The vehicle is stabilized. Reduce

speed and modify your driving style to thedriving circumstances.

The indicator light lights up: DSC has mal-functioned.

Have the system checked by a dealer's serv-ice center or another qualified service cen-ter or repair shop.

DSC, refer to page 153.

DSC Dynamic Stability Control isdeactivated or DTC Dynamic TractionControl is activated

DSC is deactivated or DTC is acti-vated.

DSC, refer to page 153, and DTC, re-fer to page 154.

Flat Tire Monitor FTM

The FTM signals a loss of tire infla-tion pressure in a tire.

Reduce your speed and stop cau-tiously. Avoid sudden braking and steeringmaneuvers.

Flat Tire Monitor, refer to page 141.

Tire Pressure Monitor TPM

The indicator light illuminates: theTire Pressure Monitor reports a lowtire inflation pressure or a flat tire.

Follow the information in the Check Controlmessage.

The indicator light flashes and is then illu-minated continuously: flat tires or tire pres-sure losses cannot be detected.

– Interference caused by systems or devi-ces with the same radio frequency: afterleaving the area of the interference, the

system automatically becomes activeagain.

– TPM was unable to complete the reset.Reset the system again.

– A wheel without TPM wheel electronicsis mounted: have it checked by a deal-er’s service center or another qualifiedservice center or repair shop as needed.

– Malfunction: have the system checkedby a dealer’s service center or anotherqualified service center or repair shop.

Tire Pressure Monitor, refer to page 137.

Steering system

Steering system may not be working.

Have the system checked by a deal-er's service center or another quali-

fied service center or repair shop.

Emissions

– The warning light lights up:

Emissions are deteriorating.Have the vehicle checked as soonas possible.

– The warning light flashes under certaincircumstances:

This indicates that there is excessivemisfiring in the engine.

Reduce the vehicle speed and have thesystem checked immediately; otherwise,serious engine misfiring within a briefperiod can seriously damage emissioncontrol components, in particular thecatalytic converter.

Socket for Onboard Diagnosis, refer topage 275.

Seite 112

CONTROLS Displays


Green lights

Turn signal

Turn signal switched on.

Unusually rapid flashing of the indi-cator light indicates that a turn sig-

nal bulb has failed.

Turn signal, refer to page 92.

Parking lights, headlight

Parking lights or headlights areswitched on.

Parking lights/low beams, headlightcontrol, refer to page 126.

Front fog lights

Front fog lights are switched on.

Front fog lights, refer to page 129.

High-beam Assistant

High-beam Assistant is switched on.

High beams are switched on and offautomatically depending on the traf-

fic situation.

High-beam Assistant, refer to page 128.

Cruise control

The system is switched on. It main-tains the speed that was set usingthe control elements on the steering

wheel.

Blue lights

High beams

High beams are switched on.

High beams, refer to page 93.

Hiding Check Control messages

Press the button on the turn signal lever.

Continuous displaySome Check Control messages are displayedcontinuously and are not cleared until themalfunction is eliminated. If several mal-functions occur at once, the messages aredisplayed consecutively.

The messages can be hidden for approx.8 seconds. After this time, they are dis-played again automatically.

Temporary displaySome Check Control messages are hiddenautomatically after approx. 20 seconds. TheCheck Control messages are stored and canbe displayed again later.

Displaying stored Check ControlmessagesVia the Central Information Display (CID):

1. "My MINI"

2. "Vehicle status"

3. "Check Control"

4. Select the SMS text message.

Seite 113

Displays CONTROLS


Display

Check Control

At least one Check Control messageis displayed or stored.

SMS text messagesSMS text messages in combination with asymbol in the instrument cluster explain aCheck Control message and the meaning ofthe indicator/warning lights.

Supplementary SMS text messagesAdditional information, such as on thecause of an error or the required action, canbe called up via Check Control.

With urgent messages the added text willbe automatically displayed on the ControlDisplay.

Depending on the Check Control message,further help can be selected.


1. "My MINI"

2. "Vehicle status"

3. "Check Control"

4. Select the desired text message.


Messages after trip completionCertain messages displayed while drivingare displayed again after the ignition isswitched off.

Fuel gauge

ConceptThe current fill level of the fuel tank is dis-played.

General informationVehicle tilt position may cause the displayto vary.

Information on refueling, refer to page 240.

Instrument cluster withoutenhanced features: display

The arrow beside the fuelpump symbol shows whichside of the vehicle the fuelfiller flap is on.

Indicator light in the instrumentcluster

The yellow indicator light illumi-nates, once the fuel reserve isreached.

Tachometer

Always avoid engine speeds in the redwarning field. In this range, the fuel supplyis reduced to protect the engine.

Odometer and trip odometer

ConceptThe total mileage driven and the mileagedriven since the last reset are displayed inthe instrument cluster.

Seite 114

CONTROLS Displays


Instrument cluster withoutadditional functions: reset tripdistance

Press the button.

– The odometer is displayedwhen the ignition isswitched off.

– When the ignition isswitched on, the trip od-ometer is reset.

External temperature

General informationIf the indicator drops to +37 ℉/+3 ℃, a sig-nal sounds.


There is an increased risk of ice on roads.

Safety information

Warning

Even at temperatures above +37 ℉/+3 ℃there can be a risk of icy roads, for in-stance on bridges or shady sections of theroad. There is a risk of accident. Modifyyour driving style to the weather condi-tions at low temperatures.

DisplayThe external temperature isdisplayed in the instrumentcluster.

Time

The time is displayed in theinstrument cluster.

Set the time on the Central In-formation Display (CID), referto page 42.

Date

The date is displayed in the in-strument cluster.

Set the date on the Central In-formation Display (CID), referto page 42.

Range

General informationWhen the remaining range is low:

– A Check Control message is displayedbriefly.

– The remaining range is shown on theOnboard Computer.

– With a dynamic driving style, for in-stance fast cornering, the engine func-tion is not always ensured.

The Check Control message appears contin-uously below a range of approx.30 miles/50 km.

Seite 115

Displays CONTROLS


Safety information

NOTICE

With a driving range of less than30 miles/50 km the engine may no longerhave sufficient fuel. Engine functions arenot ensured anymore. There is a risk ofdamage to property. Refuel promptly.

DisplayThe current range is displayedin the instrument cluster.

Displaying the cruising rangeVia the Central Information Display (CID):

1. "My MINI"


3. "Displays"

4. "Instrument panel"

5. "Range"

Current consumption

ConceptDisplays the current fuel consumption.Check whether you are currently driving inan efficient and environmentally-friendlymanner.

Displaying the currentconsumptionVia the Central Information Display (CID):

1. "My MINI"


3. "Displays"


5. "Current consumption"

Service notifications

ConceptThe function displays the service notifica-tions and the corresponding maintenancescopes.

General informationAfter the ignition is switched on the instru-ment cluster briefly displays available driv-ing distance or time to the next scheduledmaintenance.

A service advisor can read out the currentservice notifications from your vehicle key.

Display

Detailed information on servicenotificationsMore information on the type of service re-quired may be displayed on the Control Dis-play.


1. "My MINI"

2. "Vehicle status"

3. "Service required"

Maintenance and service measures andlegally mandated inspections are dis-played.

4. Select an entry to call up detailed infor-mation.

Seite 116

CONTROLS Displays


Symbols

Symbols Description

No service is currently re-quired.

The deadline for scheduledmaintenance or a legallymandated inspection is ap-proaching.

The service deadline has al-ready passed.

Entering appointment datesEnter the dates for the mandatory vehicleinspections.

Make sure that the vehicle's date and timeare set correctly.


1. "My MINI"

2. "Vehicle status"

3. "Service required"

4. "Vehicle inspection"

5. "Date:"


Automatic Service RequestData regarding the service status or legallymandated vehicle inspections is automati-cally transmitted to your dealer’s servicecenter before your vehicle is due for serv-ice.

You can check when your dealer’s servicecenter was notified.


1. "My MINI"

2. "Vehicle status"

3. Move the Controller to the left.

4. "Teleservice Call"

Gear shift indicator

ConceptThe system recommends the most efficientgear for the current driving situation.

General informationDepending on the vehicle equipment andcountry version, the gear shift indicator isactive in the manual mode of the Steptronictransmission and with manual transmission.

Suggestions to shift up or down are dis-played in the instrument cluster.

Manual transmission: displaying

Example Description

Efficient gear is set.

Depending on the equipmentversion, shift to a more effi-cient gear.

Steptronic transmission: displaying

Example Description

Efficient gear is set.

Depending on the equipmentversion, shift to a more effi-cient gear.

Seite 117

Displays CONTROLS


Speed Limit Info

Speed Limit Info

ConceptSpeed Limit Info shows the current maxi-mum permitted speed in the instrumentcluster.

General informationThe camera at the base of the interior mir-ror detects traffic signs at the edge of theroad as well as overhead sign posts. Trafficsigns with extra symbols for wet road con-ditions, etc., are also detected and comparedwith the vehicle's onboard data, such asfrom the rain sensor, and will be displayeddepending on the situation.

Without a navigation system, the system issubject to limitations imposed by technol-ogy. Traffic signs with speed limitations aredetected and displayed only. Speed limita-tions due to entering or exiting towns, high-way signs, etc. are not displayed. Speed lim-its with extra text characters are alwaysdisplayed.

Speed limits when towing a trailer are notshown.

Safety information

Warning

The system cannot serve as a substitutefor the driver’s personal judgment in as-sessing visibility and traffic situation.There is a risk of accident. Adjust drivingstyle to traffic conditions. Watch trafficclosely and actively intervene where ap-propriate.

Overview

Camera

The camera is installed near the interiormirror.

Keep the windshield in front of the interiormirror clean and clear.

DisplayDepending on the vehicle equipment, SpeedLimit Info is displayed permanently in theinstrument cluster or via the Onboard Com-puter.

Press button on the turn signal lever severaltimes, if needed.

Speed Limit Info is displayed in the instru-ment cluster.

Seite 118

CONTROLS Displays


Speed Limit Info

The last speed limit detected.

Without a navigation systemthe traffic signals are grayedout after curves or longerstretches of roadway.

Without navigation system:no speed limit or cancellationis detected.

System limitsThe system may not be fully functional andmay provide incorrect information in thefollowing situations:

– In heavy fog, wet conditions, or snow-fall.

– When traffic signs are fully or partiallyconcealed by objects, stickers or paint.

– When driving very close to the vehiclein front of you.

– When driving toward bright lights orstrong reflections.

– When the windshield in front of the in-terior mirror is fogged over, dirty or cov-ered by a sticker, etc.

– In the event of incorrect detection bythe camera.

– When passing buses or trucks with aspeed sticker.

– If the traffic signs are non-conforming.

– When traffic signs that are valid for aparallel road are detected.

– During calibration of the camera imme-diately after vehicle delivery.

Selection lists

General informationDepending on the vehicle equipment, thebuttons on the steering wheel and the dis-play in the instrument cluster can be usedto display or use the following:

– Current audio source.

– Phone redial.

– Turn on voice activation system.

Activating a list and adjusting thesetting

Button on thesteering wheel

Function

Move selection up.

Move selectiondown.

Instrument cluster withoutenhanced features: display

Onboard Computer

ConceptThe Onboard Computer displays differentvehicle data in the instrument cluster, suchas average values.

Seite 119

Displays CONTROLS


Calling up information


Information is displayed in the instrumentcluster.

Information at a glanceRepeatedly pressing the but-ton on the turn signal levercalls up the following informa-tion:

– Range.

– GREEN Info.

When GREEN Mode is activated.

– Average consumption, fuel.

– Average consumption since deliveryfrom the factory.

– Current consumption, fuel.

– Average speed.

– Date.

– Engine temperature display.

– Always Open Timer.

– Instrument cluster without enhancedfeatures:

Speed Limit Info.

– Vehicle speed.

The unit of some information can bechanged.

Setting units, refer to page 43.

Selecting informationDepending on the vehicle equipment, youcan select what information from the On-board Computer can be accessed in the in-strument cluster.


1. "My MINI"


3. "Displays"



Settings are stored for the profile currentlyused.

Information in detail

RangeDisplays the estimated cruising range avail-able with the remaining fuel.

The range is calculated based on your driv-ing style over the last 20 miles/30 km.

GREEN infoThe achieved range extension may be dis-played as a bonus range.

Average consumptionThe average consumption is calculated forthe period while the engine is running.

The average consumption is calculated forthe distance traveled since the last reset bythe Onboard Computer.

Average speedPeriods in which the vehicle is parked withthe engine manually stopped are not in-cluded in the calculation of the averagespeed.

Seite 120

CONTROLS Displays


Resetting average values

Press and hold the button on the turn signallever.

Engine temperature display

Concept

The current engine temperature, based on acombination of coolant and engine oil tem-perature is displayed. As soon as the opti-mum operating temperature has been at-tained, the indicator is in the centerposition.

General information

If the engine oil or coolant, and thus the en-gine, become too hot, a Check Control mes-sage is displayed too.

When the engine temperature is toohigh, a red indicator light is dis-played.

When the engine oil temperature istoo high, a red indicator light is dis-played.

To check the coolant level, refer topage 272.


Always Open TimerThe Always Open Timer displays the cur-rent driving time and total driving timewith the convertible top open in minutesand hours.

Reset the Always Open Timer

Reset the current driving time: press buttonon the turn signal lever for approx. 2 sec-onds with the driving times displayed.

Instrument cluster without additionalfunctions: Speed Limit InfoSpeed Limit Info shows the current maxi-mum permitted speed in the instrumentcluster.

Seite 121

Displays CONTROLS


Onboard Computer on the ControlDisplay

ConceptThe Onboard Computer displays differentvehicle data on the Control Display, such asaverage values.

General informationTwo types of Onboard Computers are availa-ble on the Control Display:

– "Onboard info": average values, such asthe consumption, are displayed. The val-ues can be reset individually.

– "Trip computer": the values deliver anoverview of a specific route and can bereset as often as necessary.

Calling up the Onboard Computer ortrip computerVia the Central Information Display (CID):

1. "My MINI"

2. "Driving information"

3. "Onboard info" or "Trip computer"

Resetting the Onboard ComputerVia the Central Information Display (CID):

1. "My MINI"


3. "Onboard info"

4. "Consumption" or "Speed"

5. "OK"

Resetting the trip computerVia the Central Information Display (CID):

1. "My MINI"


3. "Trip computer"

4. Move the Controller to the left, ifneeded.

– "Reset": all values are reset.

– "Automatic reset": all values arereset approx. 4 hours after the vehi-cle has come to a standstill.

5. If necessary, "OK"

Driving Excitement

ConceptOn the Control Display, sport instrumentscan be displayed, and the vehicle state canbe checked before the use of the SPORTprogram.

Sport instruments

General informationOn the Control Display, values for powerand torque are displayed.

Displaying sport instrumentsVia the Central Information Display (CID):

1. "My MINI"

2. "Technology in action"

3. "Sport displays"

4. "Sports instruments"

Via MINI Driving Modes switch:

1. Activate SPORT.

2. "Sport displays"

3. "Sports instruments"

Seite 122

CONTROLS Displays


Speed warning

ConceptA speed limit can be set that when reachedwill cause a warning to be issued.

General informationThe warning is repeated if the vehicle speedexceeds the set speed limit again, after ithas dropped below it by 3 mph/5 km/h.

AdjustingVia the Central Information Display (CID):

1. "My MINI"


3. "Speed warning"

4. "Warning at:"

5. Turn the Controller until the desiredspeed is displayed.


Activating/deactivatingVia the Central Information Display (CID):

1. "My MINI"


3. "Speed warning"

4. "Speed warning"

Setting your current speed as thespeed warningVia the Central Information Display (CID):

1. "My MINI"


3. "Speed warning"

4. "Select current speed"

LED ring on the central in-strument cluster

ConceptThe LED ring displays light animations torepresent specific functions.

Basic displaysBasic functions, for instance the tachome-ter, can be set to be displayed continually ifso desired.

Event displaysFunctions that are only displayed tempora-rily, for instance the volume or temperaturesettings, can be set as event displays.

Several vehicle assistance functions canalso be displayed on the LED ring. This dis-play corresponds with the displays of thefunction in the respective display.

Example: tachometerLike the tachometer in the instrument clus-ter, the light animations of the tachometer'sbasic display show the current RPMs andthe respective RPM warning thresholds.

Display

– Arrow 1: current RPM.

– Arrow 2: prewarning field.

– Arrow 3: warning field.

Seite 123

Displays CONTROLS


Switching on/off LED ringVia the Central Information Display (CID):

1. "My MINI"


3. "Displays"

4. "Center Instrument"


Adjusting the LED ringVia the Central Information Display (CID):

1. "My MINI"


3. "Displays"


5. "Basic display" or "Event display"


Setting the brightnessThe brightness can be adjusted when nightlighting is active in the instrument cluster.


1. "My MINI"


3. "Displays"


5. "Brightness at night"

6. Turn the Controller until the desiredbrightness is set.



Always Open Timer

ConceptThe Always Open Timer displays the drivingtimes with open convertible top on the Con-trol Display and in the Onboard Computer.

General informationDepending on the vehicle equipment, theAlways Open Timer can also be displayed asa light animation on the LED ring of thecentral instrument cluster.

Displaying the Always Open Timer1. "My MINI"

2. "Openometer"

DisplayThe following information is displayed onthe Control Display:

– Current driving time with theconvertible top open in minutes andhours.

– Total driving time with the convertibletop open in minutes and hours.

– Current external temperature while driv-ing with the convertible top open.

Maximum 99 hours and 59 minutes are dis-played for the current driving time, andmaximum 999 hours and 59 minutes for thetotal driving time.

Reset the current driving time1. "My MINI"

2. "Openometer"

3. "Reset trip"

To reset the total driving time, contact yourservice center.

Seite 124

CONTROLS Displays


Vehicle status

General informationThe status can be displayed and actions per-formed for several systems.

Opening the vehicle statusVia the Central Information Display (CID):

1. "My MINI"

2. "Vehicle status"

Information at a glance

Symbols Description

"Flat Tire Monitor": status ofthe run-flat tires, refer topage 141.

"Tire Pressure Monitor": sta-tus of the Tire PressureMonitor TPM, refer topage 137.

"Engine oil level": Electronicengine oil level check, referto page 268.

"Check Control": Check Con-trol messages are stored inthe background and can bedisplayed on the ControlDisplay. Displaying storedCheck Control messages, re-fer to page 113.

"Service required": display-ing service notifications, re-fer to page 116.

"Teleservice Call": Serv-ice Request.

Seite 125

Displays CONTROLS


Lights



Overview

Switches in the vehicle

The light switch element is located next tothe steering wheel.

Symbol Function

Front fog lights.

Automatic headlight control.

Cornering light.

Lights off.

Daytime running lights.

Symbol Function

Parking lights.

Low beams.

Instrument lighting.

Parking lights, low beams androadside parking lights

General informationPosition of switch: , ,

If the driver's door is opened when the igni-tion is switched off, the exterior lighting isautomatically switched off.

Parking lightsPosition of switch:

The vehicle is illuminated on all sides.

Do not use the parking lights for extendedperiods; otherwise, the battery may becomedischarged and it would then be impossibleto start the engine.

When parking, switch on the one-sidedroadside parking light, refer to page 127.

Low beamsPosition of switch:

The low beams light up when the ignition isswitched on.

Seite 126

CONTROLS Lights


Canada: roadside parking light

ConceptThe vehicle can be illuminated on one side.

Switching on

With radio-ready state switched off, pressthe lever either up or down past the resist-ance point for approx. 2 seconds.

Switching offBriefly press the lever to the resistancepoint in the opposite direction.

Welcome lights and pathwaylighting

Welcome lights

General informationDepending on the vehicle equipment andthe ambient brightness, individual lightfunctions may be switched on briefly whenthe vehicle is unlocked.

Activating/deactivatingPosition of switch: ,


1. "My MINI"


3. "Lighting"


5. "Welcome lights"


Pathway lighting

General informationThe low beams stay lit for a short while ifthe headlight flasher is switched on afterthe vehicle's radio-ready state is switchedoff.

Setting the durationVia the Central Information Display (CID):

1. "My MINI"


3. "Lighting"


5. "Pathway lighting"

6. Set length of time.


Automatic headlight control

ConceptThe low beams are switched on and off au-tomatically depending on the ambientbrightness, for example in tunnels, in twi-light or if there is precipitation.

General informationA blue sky with the sun low on the horizoncan cause the lights to be switched on.

ActivatingPosition of switch:

Seite 127

Lights CONTROLS


The indicator light in the instrument clusteris illuminated when the low beams areswitched on.

System limitsThe automatic headlight control cannotserve as a substitute for your personal judg-ment of lighting conditions.

For example, the sensors are unable to de-tect fog or hazy weather. In these situa-tions, switch the lights on manually.

Daytime running lights

General informationPosition of switch: , ,

The daytime running lights light up whenthe ignition is switched on. After the igni-tion is switched off, the parking lights lightup in position .

Activating/deactivatingIn some countries, daytime running lightsare mandatory, so it may not be possible todeactivate the daytime running lights.


1. "My MINI"


3. "Lighting"



Settings are stored for the currently usedvehicle key.

Cornering light

General informationPosition of switch:

In tight curves, for instance on mountain-ous roads or when turning, an additional,cornering light is switched on that lights upthe inside of the curve when the vehicle ismoving below a certain speed.

The cornering light is automaticallyswitched on depending on the steering an-gle or, where applicable, the use of turn sig-nals.

When driving in reverse, the corneringlights may be automatically switched on re-gardless of the steering angle.

Adaptive headlight range con-trol

The adaptive headlight range control fea-ture balances out acceleration and brakingprocesses as well as the vehicle load condi-tions in order to avoid dazzling oncomingtraffic. Illumination of the road is optimized.

High-beam Assistant

ConceptThe high-beam Assistant detects other traf-fic participants early on and automaticallyswitches the high beams on or off depend-ing on the traffic situation.

General informationThe high-beam Assistant ensures that thehigh beams are switched on, whenever thetraffic situation allows. In the low speedrange, the high beams are not switched onby the system.

The system responds to light from oncom-ing traffic and traffic driving ahead of you,and to ambient lighting, for instance intowns and cities.

Seite 128

CONTROLS Lights


The high beams can be switched on and offmanually at any time.


Position of switch, depending on the vehicleequipment: ,


The indicator light in the instrumentcluster is illuminated when the lowbeams are switched on.

The headlights are automatically switchedbetween low beams and high beams.

The blue indicator light in the instru-ment cluster lights up when the sys-tem switches on the high beams.

The high-beam Assistant is deactivatedwhen manually switching the high beamson and off, refer to page 93.

To reactivate the high-beam Assistant,press the button on the turn signal lever.

System limitsThe high-beam Assistant cannot serve as asubstitute for the driver's personal judg-ment of when to use the high beams. In sit-uation that require this, therefore switch offmanually.

The system is not fully functional in the fol-lowing situations, and driver interventionmay be necessary:

– In very unfavorable weather conditions,such as fog or heavy precipitation.

– When detecting poorly-lit road userssuch as pedestrians, cyclists, horsebackriders and wagons; when driving closeto train or ship traffic; or at animalcrossings.

– In tight curves, on hilltops or in depres-sions, in crossing traffic or half-ob-scured oncoming traffic on highways.

– In poorly-lit towns and cities or in thepresence of highly reflective signs.

– When the windshield in front of the in-terior mirror is fogged over, dirty or cov-ered with stickers, etc.

Fog lights

Front fog lights

ConceptThe front fog lights work alongside the lowbeams to illuminate a wider area of theroadway.

Functional requirementThe low beams must be switched on beforeswitching on the front fog lights.

Switching on/off

Press the button.

The green indicator light lights up ifthe front fog lights are switched on.

If the automatic headlight control, refer topage 127, is activated, the low beams willcome on automatically when you switch onthe front fog lights.

When the high beams or headlight flasherare activated, the front fog lights are notswitched on.

Seite 129

Lights CONTROLS


Instrument lighting

Functional requirementThe parking lights or low beams must beswitched on to adjust the brightness.

AdjustingAdjust the brightness with thethumbwheel.

Interior lights

General informationDepending on the equipment, the interiorlights, footwell lights, entry lights, and cour-tesy lights are controlled automatically.

The thumbwheel for the instrument lightingcontrols brightness of some of these fea-tures.

Overview

1 Interior lights

2 Reading lights

3 Ambient light

Switching the interior lights on/offPress the button.

To switch off permanently: press the buttonand hold for approx. 3 seconds.

Switching the reading lights on andoff manually

Press the button.

The reading lights are located in the frontnext to the interior light.

Ambient light

General informationDepending on the equipment version, light-ing can be adjusted for some lights in thecar's interior.

Changing color

Push the switch forward or back:manual color change.

Press the switch forward or back-ward and hold for approx. 3 seconds,until the ambient light illuminates

several times: automatic color change. Pushthe switch again to end color changes.

Setting the brightnessDepending on the equipment, the bright-ness of the ambient light can be adjustedvia the thumbwheel for the instrumentlighting or on the Control Display.


1. "My MINI"


3. "Lighting"

4. "Interior lighting"

Seite 130

CONTROLS Lights


5. "Brightness"

6. Adjust the brightness.

Seite 131

Lights CONTROLS


Safety




Airbags

1 Front airbag, driver

2 Front airbag, front passenger

3 Side airbag

4 Knee airbag

Front airbagsFront airbags help protect the driver andthe front passenger by responding to frontalimpacts in which safety belts alone wouldnot provide adequate protection.

Side airbagIn the event of a side impact, the side air-bag protects the side of the body in thechest, lap, and head area.

Seite 132

CONTROLS Safety


Knee airbagThe knee airbag protects the legs in theevent of a frontal impact.

Protective effectAirbags are not triggered in every impactsituation, for instance in less severe acci-dents or rear-end collisions.

Information on optimum effect of theairbags

Warning

If the seat position is incorrect or the de-ployment area of the airbags is impaired,the airbag system cannot provide protec-tion as intended and may cause additionalinjuries due to triggering. There is a riskof injuries or danger to life. Follow the in-formation on achieving the optimum pro-tective effect of the airbag system.

– Keep a distance from the airbags.

– Always grasp the steering wheel on thesteering wheel rim. Hold your hands atthe 3 o'clock and 9 o'clock positions, tokeep the risk of injury to your hands orarms as low as possible when the airbagis triggered.

– Make sure that the front passenger issitting correctly, i.e., keeps his or herfeet and legs in the floor area and doesnot support them on the dashboard.

– Make sure that occupants keep theirheads away from the side airbag.

– There should be no additional persons,animals or objects between an airbagand a person.

– Dashboard and windshield on the frontpassenger side must stay clear - do notattach adhesive labels or coverings anddo not attach brackets or cables, for in-

stance for GPS devices or mobilephones.

– Do not apply adhesive materials to theairbag cover panels, do not cover themor modify them in any way.

– Do not use the cover of the front airbagon the front passenger side as a storagearea.

– Do not attach slip covers, seat cushionsor other objects to the front passengerseat that are not specifically suited forseats with integrated side airbags.

– Do not place seat cushions or other ob-jects on the front seats that are not spe-cifically suited for seats with integratedside airbags.

– Do not hang pieces of clothing, such asjackets, over the backrests.

– Never modify either the individual com-ponents or the wiring in the airbag sys-tem. This also applies to steering wheelcovers, the dashboard, and the seats.

– Do not remove the airbag system.

Even when you follow all instructions veryclosely, injury from contact with the airbagscannot be fully ruled out in certain situa-tions.

The ignition and inflation noise may lead toshort-term and, in most cases, temporaryhearing impairment in sensitive occupants.

Vehicle modifications for a person with dis-abilities may affect the air bag system; con-tact MINI Customer Relations for further in-formation.

Warnings and information on the airbagsare also found on the sun visors.

Seite 133

Safety CONTROLS


Functional readiness of the airbagsystem

Safety information

Warning

Individual components can be hot aftertriggering of the airbag system. There is arisk of injury. Do not touch individualcomponents.

Warning

Improperly executed work can lead to fail-ure, malfunction or unintentional trigger-ing of the airbag system. In the case of amalfunction, the airbag system might nottrigger as intended despite the accidentseverity. There is a risk of injuries or dan-ger to life. Have the airbag systemchecked, repaired, dismantled and scrap-ped by a dealer’s service center or anotherqualified service center or repair shop.

Correct function

When the ignition is switched on,the warning light in the instrumentcluster lights up briefly and thereby

indicates the operational readiness of theentire airbag system and the belt tensioner.

Airbag system malfunctioning– Warning light does not come on when

the ignition is switched on.

– The warning light lights up continu-ously.

Automatic deactivation of thefront-seat passenger airbags

ConceptThe system reads if the front passenger seatis occupied by measuring the human body'sresistance.

Front, knee, and side airbag on the frontpassenger's side are activated or deacti-vated.

General informationBefore transporting a child on the front pas-senger seat, refer to the safety informationand instructions for children on the frontpassenger seat, see Children.

Safety information

Warning

To ensure the front-seat passenger airbagfunction, the system must be able to de-tect whether a person is sitting in thefront passenger seat. The entire seat cush-ion area must be used for this purpose.There is a risk of injuries or danger to life.Make sure that the front passenger keepshis or her feet in the floor area.

Malfunction of the automaticdeactivation systemWhen transporting older children andadults, the front-seat passenger airbags maybe deactivated in certain sitting positions.In this case, the indicator light for the front-seat passenger airbags lights up.

In this case, change the sitting position sothat the front-seat passenger airbags are ac-tivated and the indicator light goes out.

If it is not possible to activate the airbags,have the person sit in the rear.

Seite 134

CONTROLS Safety


To enable correct recognition of the occu-pied seat cushion.

– Do not attach covers, cushions, ball matsor other items to the front passengerseat unless they are specifically deter-mined to be safe for use on the frontpassenger seat.

– Do not place any electronic devices onthe front passenger seat if a child re-straint system is to be installed on it.

– Do not place objects under the seat thatcould press against the seat from below.

– No moisture in or on the seat.

Indicator light for the front-seatpassenger airbags

The indicator light for the front-seat passen-ger airbags indicates the operating state ofthe front-seat passenger airbags.

The light indicates whether the airbags areeither activated or deactivated.

– The indicator light lightsup when a child is properlyseated in a child restraintsystem or when the seat isempty. The airbags on thefront passenger side arenot activated.

– The indicator light does not light upwhen, for instance a correctly seatedperson of sufficient size is detected onthe seat. The airbags on the front pas-senger side are activated.

Detected child restraint systemsThe system generally detects childrenseated in a child restraint system, particu-larly in child restraint systems required byNHTSA at the point in time when the vehi-cle was manufactured. After installing achild restraint system, make sure that theindicator light for the front-seat passengerairbags lights up. This indicates that thechild restraint system has been detectedand the front-seat passenger airbags are notactivated.

Strength of the driver's and front-seat passenger airbagThe explosive power that activates driver's/front-seat passenger airbags very much de-pends on the positions of the driver's/frontpassenger seat.

To maintain the accuracy of this functionover the long-term, calibrate the front seatsas soon as a relevant Check Control mes-sage is displayed.

Calibrating the front seats

Warning


An appropriate Check Control message isdisplayed.

1. Move the respective seat all the way for-ward.

2. Move the respective seat forward again.The seat moves forward briefly.

3. Readjust the seat to the desired posi-tion.

Seite 135

Safety CONTROLS


The calibration procedure is completedwhen the Check Control message disap-pears.

If the message continues to be displayed,repeat the calibration.

If the message does not disappear after a re-peat calibration, have the system checkedas soon as possible.

Rollover protection system

ConceptThe rollover protection system is automati-cally activated in the event of a sufficientlyserious accident or if the longitudinal axisis tilted excessively. The safety frames lo-cated behind the rear head restraints extendwithin fractions of a second.

Supplementing the reinforced windshieldframe, the rollover protection system fur-ther increases passenger safety.

General informationDo not place any objects on the covers ofthe rollover protection system.

Safety information

Warning

There can be damage or injuries when therollover protection system is triggered.There is a risk of injury or risk of damageto property. Make sure that the area ofmovement of the rollover protection sys-tem is clear.

Warning

Improperly executed work can lead to fail-ure, malfunction or unintentional trigger-ing of the system. In the case of a malfunc-tion, the system might not trigger asintended even if there is an accident se-vere enough to warrant it. There is a riskof injuries or danger to life. Have the sys-tem checked, repaired, dismantled andscrapped by a dealer’s service center oranother qualified service center or repairshop.

Warning

After triggering or damage, system func-tionality is limited or not available any-more. There is a risk of injuries or dangerto life.

Have the system checked and replaced bya dealer’s service center or another quali-fied service center or repair shop in theevent of triggering of or damage to thesystem.

Warning

With an extended rollover protection sys-tem, the area of movement of theconvertible top is limited. There is a riskof injury or risk of damage to property.When the rollover protection system is ex-tended, do not move the convertible top.

Seite 136

CONTROLS Safety


Overview

Covers of the rollover protection system

MalfunctionA Check Control message is dis-played when there is a malfunction.

Tire Pressure Monitor TPM

ConceptThe system monitors tire inflation pressurein the four mounted tires. The system warnsyou if there is a significant loss of pressurein one or more tires.

General informationSensors in the tire valves measure the tireinflation pressure and, depending on themodel, the tire temperature.

Further information and instructions on us-ing the system can also be found under Tireinflation pressure, refer to page 244.

Functional requirementsThe following conditions must be met forthe system; otherwise, reliable flagging of aloss of tire inflation pressure is not assured:

– After a tire or wheel replacement, a re-set was performed with the correct tireinflation pressure.

– After the tire inflation pressure was ad-justed to a new value, a reset was per-formed.

– Wheels with TPM wheel electronics.

Status display

Current statusThe system status can be displayed on theControl Display, e.g., whether or not the sys-tem is active.


1. "My MINI"

2. "Vehicle status"

3. "Tire Pressure Monitor"

The current status is displayed.

Additional informationThe current tire inflation pressures are dis-played too. The values shown are instanta-neous measurements and may vary depend-ing on driving style or weather conditions.

Resetting the systemVia the Central Information Display (CID):

1. "My MINI"

2. "Vehicle status"

3. "Tire Pressure Monitor"

4. Start the engine but do not drive off.

5. Reset tire inflation pressure: "Performreset".

6. Drive away.

The following is displayed: "Resetting TirePressure Monitor…".

After a travel time of several minutes, theset tire inflation pressures are accepted asreference values. The resetting process iscompleted automatically while driving.

Seite 137

Safety CONTROLS


After a successfully completed reset, the fol-lowing is displayed: "Tire Pressure Monitoractive. See label for recommendedpressures.".

You may interrupt this trip at any time.When you continue the reset resumes auto-matically.

Messages

General informationA low tire inflation pressure may cause theDSC Dynamic Stability Control to beswitched on.

Safety information

Warning

A damaged regular tire with low or miss-ing tire inflation pressure impacts han-dling, such as steering and braking re-sponse. Run-flat tires can maintain limitedstability. There is a risk of accident. Do notcontinue driving if the vehicle is equippedwith normal tires. Follow the informationon run-flat tires and continued drivingwith these tires.

If a tire inflation pressure check isrequired

Message

A symbol with a Check Control message ap-pears on the Control Display.

Symbol Possible cause

The system has detected awheel change, but no reset wasdone.

No reset was performed for thesystem. The system issues awarning based on the tire infla-tion pressures stored during thelast reset.

Inflation was not carried out ac-cording to specifications.

The tire inflation pressure hasfallen below the level of the lastreset.

Measure

1. Check the tire pressure and correct asneeded.

2. Reset the system.

If the tire inflation pressure is too low

Message

A yellow warning light is illuminatedin the instrument cluster.

In addition, a symbol with a Check Controlmessage appears on the Control Display.


There is a tire inflation pressureloss.


Measure

1. Reduce your speed and drive moder-ately. Do not exceed a speed of80 mph/130 km/h.

Seite 138

CONTROLS Safety


2. At the next opportunity, for instance gasstation, check and correct the tire infla-tion pressure in all four tires, if neces-sary.

3. Reset the system.

If there is a significant loss of tireinflation pressure

Message


In addition, a symbol with the affected tireappears in a Check Control message on theControl Display.


There is a flat tire or a majorloss in tire inflation pressure.


Measure

1. Reduce your speed and stop cautiously.Avoid sudden braking and steering ma-neuvers.

2. Check whether the vehicle is fitted withnormal tires or run-flat tires.

Run-flat tires, refer to page 253, are la-beled with a circular symbol containingthe letters RSC marked on the tire'ssidewall.

Actions in the event of a flat tire

Normal tires1. Identify the damaged tire.

To do this, check the tire inflation pres-sure in all four tires, for instance usingthe tire pressure gage of a flat tire kit.

If the tire inflation pressure in all fourtires is correct, the Tire Pressure Moni-tor may not have been reset. In thiscase, perform the reset.

If the tire inflation pressure in all fourtires is correct, the Flat Tire Monitormay not have been initialized. In thiscase, initialize the system.

If identification of flat tire damage isnot possible, please contact a dealer’sservice center or another qualified serv-ice center or repair shop.

2. Repair the flat tire, e.g., with a flat tirekit or by changing the wheel.

Use of sealant, for instance from the flat tirekit, may damage the TPM wheel electronics.In this case, have the electronics checkedand replaced at the next opportunity.

Run-flat tires

Safety information

Warning

The vehicle handles differently when arun-flat tire has insufficient or no tirepressure; for instance, reduced lane stabil-ity when braking, braking distances arelonger and the self-steering properties willchange. There is a risk of accident. Drivemoderately and do not exceed a speed of50 mph/80 km/h.

Maximum speed

You may continue driving with a damagedtire at speeds up to 50 mph/80 km/h.

Seite 139

Safety CONTROLS


Continued driving with a flat tire

If continuing to drive with a damaged tire:

1. Avoid sudden braking and steering ma-neuvers.

2. Do not exceed a speed of50 mph/80 km/h.

3. Check the tire inflation pressure in allfour tires at the next opportunity.


Possible driving range with adepressurized tire

The distance for which it may be possible todrive safely varies depending on how thevehicle is loaded and used, e.g., speed, roadconditions, external temperature. The driv-ing range may be less but may also be moreif an economical driving style is used.

If the vehicle is loaded with an averageweight and used under favorable conditions,the distance for which it may be safe todrive may be up to 50 miles/80 km.

Vehicle handling with damaged tires

Vehicles driven with a damaged tire willhandle differently, potentially leading toconditions such as the following:

– Greater likelihood of swerving offcourse.

– Longer braking distances.

– Changed self-steering properties.

Modify your driving style. Avoid abruptsteering maneuvers or driving over obsta-cles, for instance curbs or potholes.

Final tire failure

Vibrations or loud noises while driving canindicate the final failure of a tire.

Reduce speed and stop; otherwise, pieces ofthe tire could come loose and cause an acci-dent.

Do not continue driving. Contact a dealer’sservice center or another qualified servicecenter or repair shop.

System limits

TemperatureThe tire inflation pressure depends on thetire's temperature.

Driving or exposure to the sun will increasethe tire's temperature, thus increasing thetire inflation pressure.

The tire inflation pressure is reduced whenthe tire temperature falls again.

These circumstances may cause a warningwhen temperatures fall very sharply.

Sudden tire pressure lossThe system cannot indicate sudden serioustire damage caused by external circumstan-ces.

Failure performing a resetThe system does not function properly if areset has not been carried out, for instancea flat tire is reported though tire inflationpressures are correct.

MalfunctionThe yellow warning light flashes andis then illuminated continuously. ACheck Control message is displayed.

It may not be possible to identify tire pres-sure losses.

Examples and recommendations in the fol-lowing situations:

– A wheel without TPM wheel electronics,for instance an emergency wheel, ismounted: have it checked by a dealer’s

Seite 140

CONTROLS Safety


service center or another qualified serv-ice center or repair shop as needed.

– Malfunction: have system checked by adealer’s service center or another quali-fied service center or repair shop.

– The system was unable to complete thereset. Perform a system reset again.

– Interference caused by systems or devi-ces with the same radio frequency: afterleaving the area of the interference, thesystem automatically becomes activeagain.

Declaration according to NHTSA/FMVSS 138 Tire Pressure MonitoringSystemEach tire, including the spare (if provided)should be checked monthly when cold andinflated to the inflation pressure recom-mended by the vehicle manufacturer on thevehicle placard or tire inflation pressure la-bel. (If your vehicle has tires of a differentsize than the size indicated on the vehicleplacard or tire inflation pressure label, youshould determine the proper tire inflationpressure for those tires.) As an added safetyfeature, your vehicle has been equippedwith a tire pressure monitoring system(TPMS) that illuminates a low tire pressuretelltale when one or more of your tires issignificantly under-inflated. Accordingly,when the low tire pressure telltale illumi-nates, you should stop and check your tiresas soon as possible, and inflate them to theproper pressure. Driving on a significantlyunder-inflated tire causes the tire to over-heat and can lead to tire failure. Under-infla-tion also reduces fuel efficiency and tiretread life, and may affect the vehicle's han-dling and stopping ability. Please note thatthe TPMS is not a substitute for proper tiremaintenance, and it is the driver's responsi-bility to maintain correct tire pressure, evenif under-inflation has not reached the levelto trigger illumination of the TPMS low tire

pressure telltale. Your vehicle has also beenequipped with a TPMS malfunction indica-tor to indicate when the system is not oper-ating properly. The TPMS malfunction indi-cator is combined with the low tire pressuretelltale. When the system detects a mal-function, the telltale will flash for approxi-mately one minute and then remain contin-uously illuminated. This sequence willcontinue upon subsequent vehicle start-upsas long as the malfunction exists. When themalfunction indicator is illuminated, thesystem may not be able to detect or signallow tire pressure as intended. TPMS mal-functions may occur for a variety of rea-sons, including the installation of replace-ment or alternate tires or wheels on thevehicle that prevent the TPMS from func-tioning properly. Always check the TPMSmalfunction telltale after replacing one ormore tires or wheels on your vehicle to en-sure that the replacement or alternate tiresand wheels allow the TPMS to continue tofunction properly.

Flat Tire Monitor FTM

ConceptThe system detects tire inflation pressureloss on the basis of rotation speed differen-ces between the individual wheels whiledriving.

In the event of a tire inflation pressure loss,the diameter and therefore the rotationalspeed of the corresponding wheel changes.The difference will be detected and reportedas a flat tire.

The system does not measure the actual in-flation pressure in the tires.

Seite 141

Safety CONTROLS


Functional requirementsThe following conditions must be met forthe system; otherwise, reliable flagging of aloss of tire inflation pressure is not assured:

– After a tire or wheel replacement, an ini-tialization was performed with the cor-rect tire inflation pressure.

– After the tire pressure was adjusted to anew value, an initialization was per-formed.

Status displayThe current status of the flat tire monitorcan be displayed, for instance whether theRPA is active.


1. "My MINI"

2. "Vehicle status"

3. "Flat Tire Monitor"

The status is displayed.

Initialization requiredAn initialization must be performed in thefollowing situations:

– After the tire inflation pressure hasbeen adjusted.

– After a tire or wheel replacement.

Performing initializationWhen initializing, the set tire inflationpressures serve as reference values in orderto detect a flat tire. Initialization is startedby confirming the tire inflation pressures.

Do not initialize the system when drivingwith snow chains.


1. "My MINI"

2. "Vehicle status"

3. "Flat Tire Monitor"

4. Start the engine but do not drive off.

5. Start the initialization with: "Performreset".

6. Drive away.

The initialization is completed while driv-ing, which can be interrupted at any time.

The initialization automatically continueswhen driving resumes.

Messages

General informationWhen a flat tire is indicated, DSC DynamicStability Control is switched on, if needed.

Safety information

Warning

A damaged regular tire with low or miss-ing tire inflation pressure impacts han-dling, such as steering and braking re-sponse. Run-flat tires can maintain limitedstability. There is a risk of accident. Do notcontinue driving if the vehicle is equippedwith normal tires. Follow the informationon run-flat tires and continued drivingwith these tires.

Indication of a flat tire


In addition, a symbol with a Check Controlmessage appears on the Control Display.


There is a flat tire or a majorloss in tire inflation pressure.

Seite 142

CONTROLS Safety


Measure1. Reduce your speed and stop cautiously.

Avoid sudden braking and steering ma-neuvers.

2. Check whether the vehicle is fitted withnormal tires or run-flat tires.

Run-flat tires, refer to page 253, are la-beled with a circular symbol containingthe letters RSC marked on the tire'ssidewall.

Actions in the event of a flat tire

Normal tires1. Identify the damaged tire.

To do this, check the tire inflation pres-sure in all four tires, for instance usingthe tire pressure gage of a flat tire kit.



If identification of flat tire damage isnot possible, please contact a dealer’sservice center or another qualified serv-ice center or repair shop.

2. Repair the flat tire, e.g., with a flat tirekit or by changing the wheel.

Use of sealant, for instance from the flat tirekit, may damage the TPM wheel electronics.In this case, have the electronics checkedand replaced at the next opportunity.

Run-flat tires

Safety information

Warning


Maximum speed

You may continue driving with a damagedtire at speeds up to 50 mph/80 km/h.

Continued driving with a flat tire

If continuing to drive with a damaged tire:

1. Avoid sudden braking and steering ma-neuvers.

2. Do not exceed a speed of50 mph/80 km/h.

3. Check the tire inflation pressure in allfour tires at the next opportunity.


Possible driving range with adepressurized tire

The distance for which it may be possible todrive safely varies depending on how thevehicle is loaded and used, e.g., speed, roadconditions, external temperature. The driv-ing range may be less but may also be moreif an economical driving style is used.

If the vehicle is loaded with an averageweight and used under favorable conditions,

Seite 143

Safety CONTROLS


the distance for which it may be safe todrive may be up to 50 miles/80 km.

Vehicle handling with damaged tires

Vehicles driven with a damaged tire willhandle differently, potentially leading toconditions such as the following:

– Greater likelihood of swerving offcourse.

– Longer braking distances.

– Changed self-steering properties.

Modify your driving style. Avoid abruptsteering maneuvers or driving over obsta-cles, for instance curbs or potholes.

Final tire failure

Vibrations or loud noises while driving canindicate the final failure of a tire.

Reduce speed and stop; otherwise, pieces ofthe tire could come loose and cause an acci-dent.

Do not continue driving. Contact a dealer’sservice center or another qualified servicecenter or repair shop.

System limitsThe system could be delayed or malfunctionin the following situations:

– A natural, even tire inflation pressureloss in all four tires will not be recog-nized. Therefore, check the tire inflationpressure regularly.

– Sudden serious tire damage caused byexternal circumstances cannot be recog-nized in advance.

– When the system has not been initial-ized.

– When driving on a snowy or slipperyroad surface.

– Sporty driving style: spinning tractionwheels, high lateral acceleration (drift-ing).

– When driving with snow chains.

Intelligent Safety

ConceptIntelligent Safety enables central operationof the driver assistance systems.

The intelligent safety systems can help pre-vent an imminent collision.

– Approach control warning with Citylight braking function, refer topage 145.

– Daytime pedestrian collision mitigation,refer to page 148.

Safety information

Warning


Warning

Indicators and warnings cannot serve as asubstitute for the driver’s personal judg-ment. Due to its limits, the system may notissue warnings or reactions, or these maybe issued late or in a manner that is notconsistent with their normal use. There isa risk of accident. Adjust driving style totraffic conditions. Watch traffic closelyand actively intervene where appropriate.

Seite 144

CONTROLS Safety


Warning

Due to system limits, individual functionscan malfunction during tow-starting/towing with the Intelligent Safety systemsactivated. There is a risk of accident.Switch all Intelligent Safety systems offprior to tow-starting/towing.

Overview

Button in the vehicle

Intelligent Safety button

Switching on/offSome Intelligent Safety systems are auto-matically active after every departure. SomeIntelligent Safety systems activate accord-ing to the last setting.

Press button briefly:

– The menu for the IntelligentSafety system is displayed. Thesystems are individuallyswitched off according to theirrespective settings.

– LED lights up orange or goes out respec-tive to their individual settings.

Adjust the settings as needed. The individ-ual settings are stored for the driver profilecurrently in use.

Press button again:

– All Intelligent Safety systemsare switched on.

– The LED lights up green.

Hold down button:

– All Intelligent Safety systemsare switched off.

– The LED goes out.

Approach control warningwith city light braking func-tion

ConceptThe system may prevent some accidents. Inthe event of an accident, the system may re-duce impact speed.

The system sounds a warning before an im-minent collision and activates brakes inde-pendently, if needed.

The Brake Assistant function activates andapplies the brakes with limited force andduration.

A camera at the base of the interior mirrorcontrols the system.

The approach control warning is availableeven if cruise control has been deactivated.

With the vehicle approaching another vehi-cle intentionally, the approach control warn-ing and braking are delayed in order toavoid false system reactions.

General informationThe system warns at two levels of an immi-nent danger of collision at speeds from ap-prox. 3 mph/5 km/h. The timing of warn-ings may vary with the current drivingsituation.

Seite 145

Safety CONTROLS


Braking is performed at speeds up to ap-proximately 35 mph/60 km/h.

Detection range

Objects that the system can detect aretaken into account.

Safety information

Warning


Warning


Warning


Overview



Camera



Seite 146

CONTROLS Safety


Switching on/off

Switching on automaticallyThe system is automatically active after ev-ery driving off.

Switching on/off manually


– The menu for the IntelligentSafety system is displayed. Thesystems are individuallyswitched off according to theirrespective settings.



Press button again:



Hold down button:



Setting the warning timeThe warning time can be set via the CentralInformation Display (CID).

1. "My MINI"


3. "Intelligent Safety"

4. "Warning time"


The selected warning time is stored for thedriver profile currently in use.

Warning with braking function

DisplayIf a collision with a vehicle detected in thisway is imminent, a warning symbol appearson the instrument cluster.

Symbol Measure

Symbol lights up red: prewarn-ing.

Brake and increase distance.

Symbol flashes red and anacoustic signal sounds: acutewarning.

Brake and make an evasive ma-neuver, if necessary.

PrewarningThis warning is provided, for instance whenthere is impending danger of a collision orthe distance to the vehicle ahead is toosmall.

If a prewarning is provided, respond bybraking as warranted.

Acute warning with braking functionAn acute warning is displayed when thereis an imminent danger of collision due tothe vehicle approaching another object at ahigh speed.

The driver must intervene actively whenthere is an acute warning. If necessary, thedriver is assisted by a minor automaticbraking intervention in a possible risk ofcollision.

Acute warnings may be provided even whenthere has been no prior warning.

Braking interventionThe warning prompts the driver to inter-vene. During a warning, the maximum brak-ing force is used. In order to activate the

Seite 147

Safety CONTROLS


Brake Assistant function, you must applythe brakes quickly and forcefully. If there isa risk of collision, the system may assistwith braking. When the vehicle is travelingat a low speed, the vehicle may come to acomplete stop.

Manual transmission: during a braking in-tervention up to a complete stop, the enginemay be shut down.

The driver may interrupt the braking inter-vention function by stepping on the acceler-ator pedal or by actively moving the steer-ing wheel.

The system’s ability to detect objects maybe limited in some circumstances. Refer tothe information in this Owner’s Manual re-garding the limitations of the system andactively intervene as warranted.

System limits

Safety information

Warning

The system is designed to operate in cer-tain conditions and circumstances. Due toconditions or other factors, the systemmay not respond. There may be a risk ofaccident or risk of damage to property. Ac-tively intervene as warranted. Refer to theinformation in this Owner’s Manual re-garding the scope of the system’s opera-tion and limitations.

Detection rangeThe system's detection potential is limited.

Thus, a system reaction might not come ormight come late.

The following situations may not be de-tected, for example:

– Slow moving vehicles when you ap-proach them at high speed.

– Vehicles that suddenly swerve in frontof you, or sharply decelerating vehicles.

– Vehicles with an unusual rear appear-ance.

– Two-wheeled vehicles ahead of you.

Functional limitationsThe system may not be fully functional inthe following situations:


– In tight curves.

– If the field of view of the camera or thewindshield is dirty or covered.

– If the driving stability control systemsare deactivated, for instance DSC OFF.

– Up to 10 seconds after the start of theengine via the Start/Stop button.


– If there are constant blinding effects be-cause of oncoming light, for instancefrom the sun low in the sky.

Warning sensitivityThe more sensitive the warning settingsare, the more warnings are displayed.Therefore, there may also be an excess ofpremature or unjustified warnings and reac-tions.

Daytime pedestrian collisionmitigation

ConceptThe system may prevent some accidentswith pedestrians.

When driving at city speeds, the systemwill issue a warning if there is imminent

Seite 148

CONTROLS Safety


risk of a collision with pedestrians, and sup-port this with a light braking function.

The camera at the base of the interior mir-ror controls the system.

General informationIn sufficiently bright conditions, the systemissues a warning of a possible risk of colli-sion with pedestrians in the speed rangefrom approx. 6 mph/10 km/h to approx.35 mph/60 km/h

The system reacts to people who are withinthe detection range of the system.

Detection range

The detection area in front of the vehicle isdivided into two areas:

– Central area, arrow 1, directly in front ofthe vehicle.

– Expanded area, arrow 2, to the right andleft of the central area.

A collision is imminent if pedestrians are lo-cated within the central area. A warning isissued about pedestrians who are locatedwithin the extended area only if they aremoving in the direction of the central area.

Safety information

Warning


Warning


Warning


Seite 149

Safety CONTROLS


Overview



Camera



Switching on/off

Switching on automaticallyThe system is automatically active after ev-ery driving off.

Switching on/off manually


– The menu for the IntelligentSafety system is displayed. Thesystems are individually

switched off according to theirrespective settings.



Press button again:



Hold down button:



Warning with braking function

DisplayIf a collision with a person detected in thisway is imminent, a warning symbol appearson the instrument cluster.

The red symbol is displayed and asignal sounds.

Intervene immediately by braking ormake an evasive maneuver.

Braking interventionThe warning prompts the driver to inter-vene. During a warning, the maximum brak-ing force is used. In order to activate theBrake Assistant function, you must applythe brakes quickly and forcefully. If there isa risk of collision, the system may assistwith braking. When the vehicle is travelingat a low speed, the vehicle may come to acomplete stop.

Manual transmission: during a braking in-tervention up to a complete stop, the enginemay be shut down.

Seite 150

CONTROLS Safety


The driver may interrupt the braking inter-vention function by stepping on the acceler-ator pedal or by actively moving the steer-ing wheel.

The system’s ability to detect objects maybe limited in some circumstances. Refer tothe information in this Owner’s Manual re-garding the limitations of the system andactively intervene as warranted.

System limits

Safety information

Warning


Detection rangeThe detection potential of the camera is lim-ited.

Thus, a warning might not be issued or beissued late.

The following situations may not be de-tected, for example:

– Partially covered pedestrians.

– Pedestrians that are not detected assuch because of the viewing angle orcontour.

– Pedestrians outside of the detectionrange.

– Pedestrians having a body size less than32 in/80 cm.

Functional limitationsThe system may not be fully functional ormay not be available in the following situa-tions:




– If the driving stability control systemsare deactivated, for instance DSC OFF.

– Up to 10 seconds after the start of theengine via the Start/Stop button.


– If there are constant blinding effects be-cause of oncoming light, for instancefrom the sun low in the sky.

– When it is dark outside.

Brake force display

ConceptAdditional brake lights indicate emergencybraking to the traffic behind. This can re-duce the risk of a rear-end collision.

General information

– During normal brake application, thebrake lights light up.

Seite 151

Safety CONTROLS


– During heavy brake application, theflashers additionally light up.

PostCrash – iBrake

ConceptIn the event of an accident, the system canbring the vehicle to a halt automaticallywithout intervention by the driver in cer-tain situations. This can reduce the risk of afurther collision and the consequencesthereof.

At standstillAfter coming to a halt, the brake is releasedautomatically. Secure the vehicle againstrolling.

Harder vehicle brakingIn certain situations, it can be necessary tobring the vehicle to a halt more quickly thanthe Brake Assistant allows.

To do this, quickly apply extra force to thebrake. For a brief period, the braking pres-sure will be higher than the braking pres-sure that is achieved by the automatic brak-ing function. This interrupts automaticbraking.

Interrupting automatic brakingIt can be necessary to interrupt automaticbraking in certain situations, for instancefor an evasive maneuver.

Interrupt automatic braking:

– By pressing the brake pedal.

– By pressing the accelerator pedal.

Seite 152

CONTROLS Safety


Driving stability control systems



Antilock Braking System ABS

ABS prevents locking of the wheels duringbraking.

The vehicle maintains its steering powereven during full brake applications, whichincreases the active safety.

ABS is ready when vehicle is ready to drive.

Brake assistant

When you apply the brakes rapidly, this sys-tem automatically boosts the vehicle brak-ing capability to the furthest possible ex-tent. It reduces the braking distance to aminimum during an emergency stop. Thissystem utilizes all of the capabilities pro-vided by the Antilock Brake System ABS.

Do not reduce the pressure on the brakepedal for the duration of the emergencystop.

DSC Dynamic Stability Control

ConceptWithin the physical limits, the system helpsto keep the vehicle on a steady course byreducing engine speed and by applyingbrakes to the individual wheels.

General informationDSC detects the following unstable drivingconditions, for instance:

– Fishtailing, which can lead to oversteer-ing.

– Loss of traction of the front wheels,which can lead to understeering.

Dynamic Traction Control DTC, refer topage 154, is a version of the DSC where for-ward momentum is optimized.

Safety information

Warning

The system cannot serve as a substitutefor the driver’s personal judgment in as-sessing the traffic conditions. Based onthe limits of the system, it cannot inde-pendently react to all traffic situations.There is a risk of accident. Adjust drivingstyle to traffic conditions. Watch trafficclosely and actively intervene where ap-propriate.

Indicator/warning lightsThe indicator light flashes: DSC con-trols the drive and braking forces.

The indicator light lights up: DSC hasmalfunctioned.

Seite 153

Driving stability control systems CONTROLS


Deactivating DSC: DSC OFF

General informationWhen DSC is deactivated, driving stabilityis reduced during acceleration and whendriving in curves.

To increase vehicle stability, activate DSCagain as soon as possible.

Deactivating DSC

Press and hold this button but notlonger than approx. 10 seconds, un-til the indicator light for DSC OFF

lights up in the instrument cluster and dis-plays DSC OFF.

DSC is switched off.

Activating DSC

Press the button.

DSC OFF and the DSC OFF indicatorlight go out.

Indicator/warning lightsWhen DSC is deactivated, DSC OFF is dis-played in the instrument cluster.

The indicator light lights up: DSC isdeactivated.

Automatic activationWhen DSC is deactivated, automatic activa-tion occurs in the following situations:

– The vehicle has a flat tire.

– When activating cruise control in theTRACTION or DSC OFF settings.

DTC Dynamic Traction Con-trol

ConceptDTC is a version of the DSC Dynamic Stabil-ity Control where forward momentum is op-timized.

The system ensures maximum headway onspecial road conditions, for instance unp-lowed snowy roads or loose road surfaces,but with somewhat limited vehicle stability.

When DTC is activated, the vehicle hasmaximum traction. Driving stability is lim-ited during acceleration and when drivingin curves.

Drive carefully.

You may find it useful to briefly activateDTC under the following special circum-stances:

– When driving in slush or on uncleared,snow-covered roads.

– When driving off from deep snow orloose ground.

– When driving with snow chains.

Deactivating/activating DTCDynamic Traction Control

Activating DTC

Press the button.

TRACTION is displayed in the in-strument cluster and the indicator light forDSC OFF lights up.

Deactivating DTC

Press the button again.

TRACTION and the DSC OFF indica-tor light go out.

Seite 154

CONTROLS Driving stability control systems


Performance Control

Performance Control enhances the agility ofthe vehicle.

To increase maneuverability, wheels arebraked individually when a sporty drivingstyle is used.

Adaptive chassis

ConceptThe tuning of the suspension can bechanged with the system.

The system offers several different pro-grams.

The programs are selected via the MINIDriving Modes switch.

Programs

MID/GREENBalanced tuning of the shock absorbers formore comfort.

SPORTConsistently sporty tuning of the shock ab-sorbers for greater driving agility.

MINI Driving Modes switch

ConceptThe MINI Driving Modes switch helps tofine-tune the vehicle's settings and features.

Choose between three different programs.

Pressing the MINI Driving Modes switchwill activate the particular program.

Operating the programs

Switch Program

SPORT

MID

GREEN

MIDMID provides balanced tuning.

With each starting operation, MID is acti-vated using the Start/Stop button.

GREEN

ConceptGREEN provides consistent tuning to maxi-mize range.

Activating GREENPress the MINI Driving Modes switchdownward until GREEN is displayed in theinstrument cluster.

Configuring GREEN

Via MINI Driving Modes switch

1. Activate GREEN.

2. "Configure GREEN"

3. Configure the program.

This configuration is retrieved whenGREEN is activated.

Via the Central Information Display (CID)

1. "My MINI"


3. If necessary, "Driving mode"



Seite 155



This configuration is retrieved whenGREEN is activated.

SPORT

ConceptConsistently sporty tuning of the drivetrainfor greater driving agility.

Depending on the vehicle equipment, thetuning of the chassis and suspension alsochanges and SPORT can be individuallyconfigured.

The configuration is stored for the driverprofile currently in use.

Activating SPORTPress the MINI Driving Modes switch up-ward until SPORT is displayed in the instru-ment cluster.

Configuring SPORTVia the Central Information Display (CID):

1. "My MINI"



4. "Configure SPORT"


This configuration is retrieved when SPORTis activated.

Configuring driving programSettings can be made for the following driv-ing programs in Driving mode:

– GREEN, refer to page 155.

– SPORT, refer to page 156.

Displays

Program selection

Pressing the MINI DrivingModes switch displays a list ofprograms, which can be se-lected.

Selected program

The instrument cluster dis-plays the selected program.

Drive-off assistant

ConceptThis system supports driving off on uphillgrades. The parking brake is not required.

Driving off with the drive-offassistant1. Hold the vehicle in place with the foot

brake.

2. Release the foot brake and drive offwithout delay.

After the foot brake is released, the vehicleis held in place for approx. 2 seconds.

Servotronic

Servotronic is a speed-dependent powersteering function.

The system provides the steering force withmore support at low speeds than at higherones. This makes it easier to park, for in-stance, and makes steering firmer whendriving at faster speeds.

Seite 156

CONTROLS Driving stability control systems


Furthermore, the steering force adapts ac-cording to the driving program, so that afirm, sporty feel or a comfortable steeringresponse is conveyed.

Seite 157



Driving comfort



Camera-based cruise control

ConceptUsing this system, a desired speed and adistance to a vehicle ahead can be adjustedusing the buttons on the steering wheel.

The system maintains the desired speed onclear roads. The vehicle accelerates orbrakes automatically.

If a vehicle is driving ahead of you, the sys-tem adjusts the speed of your vehicle sothat the set distance to the vehicle ahead ismaintained. The speed is adjusted as far asthe given situation allows.

The distance can be adjusted in severalsteps. For safety reasons, it depends on therespective speed.

General informationA camera on the interior mirror is used todetect vehicles driving ahead.

Depending on the settings, the characteris-tics of cruise control many change in cer-tain ranges.

Safety information

Warning


Warning

The desired speed can be incorrectly ad-justed or called up by mistake. There is arisk of accident. Adjust the desired speedto the traffic conditions. Watch trafficclosely and actively intervene where ap-propriate.

Warning

Risk of accident due to too high speed dif-ferences to other vehicles, for instance inthe following situations:

– When fast approaching a slowly mov-ing vehicle.

– Vehicle suddenly swerving into ownlane.

– When fast approaching standing ve-hicles.

There is a risk of injuries or danger to life.Watch traffic closely and actively inter-vene where appropriate.

Seite 158

CONTROLS Driving comfort


Overview

Buttons on the steering wheel

Button Function

Cruise control on/off, refer topage 159.

Store/maintain speed, refer topage 160.

Pause cruise control, refer topage 159.

Continue cruise control with thelast setting, refer to page 161.

Reduce distance, refer topage 160.

Increase the distance, refer topage 161.

Increase speed, refer topage 160.

Reduce speed, refer to page 160.

Buttons are arranged according to vehicle'sseries, optional features and country speci-fications.

Camera



Functional requirements

Speed rangeThe system is best used on well-constructedroads.

The system is functional at speeds begin-ning at approx. 20 mph/30 km/h.

The max. speed that can be set is85 mph/140 km/h.

Active cruise control is paused below ap-prox. 20 mph/30 km/h. The system does notbrake to a stop.

Switching on/off and interruptingcruise control

Switching on

Press the button on the steeringwheel.

Instrument cluster without enhancedfeatures:

Display in the instrument clusterlights up.


Display in the instrument clusterlights up. The current speed is adopted asdesired speed and displayed with symbol.

Cruise control is active and maintains theset speed.

DSC Dynamic Stability Control is switchedon, if necessary.

Switching off


The displays go out. The stored desiredspeed is deleted.

Seite 159

Driving comfort CONTROLS


Interrupting manually


Interrupting automaticallyThe system is automatically interrupted inthe following situations:

– When the driver applies the brakes.

– Manual transmission: when the clutchpedal is depressed for a few seconds orreleased while a gear is not engaged.

– If selector lever position N is set.

– Dynamic Traction Control DTC is acti-vated or DSC Dynamic Stability Controlis deactivated.

– If DSC Dynamic Stability Control inter-venes.

– If the detection range of the camera isimpaired, for instance by soiling, heavyprecipitation or glare effects from thesun.

– If the vehicle in front decelerates belowa speed of approx. 20 mph/30 km/h.

Setting the speed

Maintaining/storing the speedPress or button in the interruptedstate.

When the system is switched on, the cur-rent speed is maintained and stored as thedesired speed.


The stored speed is displayed by thesymbol in the Info Display of the instrumentcluster.


The speed can also be stored as follows:

Press the button.

Changing the speed or button: press until the desired

speed is set.

If active, the displayed speed is stored andthe vehicle reaches the stored speed whenthe road is clear.

– or button: each time it is pressedto the point of resistance, the desiredspeed increases or decreases by approx.1 mph/1 km/h.

– or button: each time it is pressedpast the resistance point, the desiredspeed changes by a maximum of 5 mph/10 km/h.

or button: hold down to repeat theaction.

Adjusting the distance

Safety information

Warning

The system cannot serve as a substitutefor the driver’s personal judgment. Due tothe system limits, braking can be late.There may be a risk of accident or risk ofdamage to property. Be aware to the trafficsituation at all times. Adjust the distanceto the traffic and weather conditions andmaintain the prescribed safety distance,possibly by braking.

Reduce distance

Press the button repeatedly untilthe desired distance is set.


Seite 160



The set distance is briefly displayed in theleft part of the Info Display of the instru-ment cluster.

Increase the distance

Press the button repeatedly untilthe desired distance is set.


The set distance is briefly displayedin the left part of the Info Display of the in-strument cluster.

Continuing cruise control

General informationAn interrupted cruise control can be contin-ued by calling up the stored speed.

Make sure that the difference between cur-rent speed and stored speed is not too largebefore calling up the stored speed. Other-wise, unintentional braking or acceleratingmay occur.

In the following cases, the stored speedvalue is deleted and cannot be called upagain:

– When the system is switched off.

– When the ignition is switched off.

Calling up the stored speed anddistance

Press the button with the system in-terrupted. Cruise control is contin-ued with the stored values. The in-

strument cluster briefly displays theselected distance.

Switching distance control on/off

Safety information

Warning

The system does not react to traffic driv-ing ahead of you, but instead maintainsthe stored speed. There may be a risk ofaccident or risk of damage to property. Ad-just the desired speed to the traffic condi-tions and brake as needed.

Switching distance control offDistance control can be switched off and onwhen driving with cruise control activated.

Press and hold this button.

Or:

Press and hold this button.

The indicator light in the instrumentcluster lights up.

To switch distance control back on, pressone of the two buttons again briefly.

After changing over distance control, aCheck Control message is displayed.


Desired speed and stored speed


In addition to the indicator light, thedesired speed is displayed in the Info Dis-play.

– Display lights up green: system is active,the display indicates the desired speed.

Seite 161



– Display lights up orange: system is in-terrupted, the display indicates thestored speed.

– No display: system is switched off.

If no speed is indicated, it is possible thatthe conditions necessary for operation arenot currently fulfilled.

Distance to vehicle ahead of you

Distance display

Distance 1

Distance 2

Distance 3

Distance 4

This value is set automatically af-ter the system is switched on.

Instrument clusters without enhanced fea-tures: selected distance from the vehicledriving ahead is briefly displayed in the lefthand portion of the Info Display.

Detected vehicle


Symbol lights up orange: a vehiclehas been detected ahead of you.



Symbol flashes orange.

The conditions are not adequate for the sys-tem to work.

The system was deactivated but applies thebrakes until you actively resume control bypressing on the brake pedal or acceleratorpedal.

Symbol flashes red and a signalsounds:

Brake and make an evasive maneu-ver, if necessary.

System interrupted without detectedvehicle.

System interrupted with detected ve-hicle.

System limits

Detection range

The detection capacity of the system andthe automatic braking capacity are limited.

Two-wheeled vehicles for instance mightnot be detected.

DecelerationThe system does not decelerate in the fol-lowing situations:

– For pedestrians, cyclists or similarlyslow-moving road users.

– For red traffic lights.

– For cross traffic.

– For oncoming traffic.

Seite 162



– Unlit vehicles or vehicles with nonwork-ing lighting at night.

Swerving vehicles

A vehicle driving in front of you is not de-tected until it is completely within the samelane as your vehicle.

If a vehicle driving ahead of you suddenlyswerves into your lane, the system may notbe able to automatically restore the selecteddistance. It may not be possible to restorethe selected distance in certain situations,including if you are driving significantlyfaster than vehicles driving ahead of you,for instance when rapidly approaching atruck. When a vehicle driving ahead of youis reliably detected, the system requeststhat the driver intervene by braking andcarrying out evasive maneuvers, if needed.

Cornering

When the desired speed is too high for acurve, the speed is reduced slightly. Be-cause curves may not be anticipated in ad-

vance, drive into a curve at an appropriatespeed.

The system has a limited detection range.Situations can arise in tight curves where avehicle driving ahead will not be detectedor will be detected very late.

When you approach a curve the system maybriefly report vehicles in the next lane dueto the bend of the curve. If the system de-celerates you may compensate it by brieflyaccelerating. After releasing the acceleratorpedal the system is reactivated and controlsspeed independently.

WeatherThe following restrictions can occur underunfavorable weather or light conditions:

– Poorer vehicle recognition.

– Short-term interruptions for vehiclesthat are already recognized.

Examples of unfavorable weather or lightconditions:

– Wet conditions.

– Snowfall.

– Slush.

– Fog.

– Glare.

Drive attentively, and react to the currenttraffic situation. If necessary, intervene ac-tively, for instance by braking, steering orevading.

Seite 163



Engine powerThe desired speed may not be maintainedon uphill grades if engine power is insuffi-cient.

MalfunctionA Check Control message is displayed if thesystem fails or was automatically deacti-vated.

The system may not be fully functional inthe following situations:

– When an object was not correctly de-tected.




– When driving toward bright lights.

– Up to 20 seconds after the start of theengine, via the Start/Stop button.


Cruise control

ConceptUsing this system, a desired speed can beadjusted using the buttons on the steeringwheel. The system maintains the desiredspeed. The system accelerates and brakesautomatically as needed.

General informationThe system is functional at speeds begin-ning at approx. 20 mph/30 km/h.

Depending on the settings, the cruise con-trol settings many change under certainconditions.

Safety information

Warning


Warning

The use of the system can lead to an in-creased risk of accidents in the followingsituations, for instance:

– On winding roads.

– In heavy traffic.

– On slippery roads, in fog, snow, orwet conditions, or on a loose roadsurface.

There may be a risk of accident or risk ofdamage to property. Only use the system ifdriving at constant speed is possible.

Overview

Buttons on the steering wheel

Button Function

Cruise control on/off, refer topage 165.

Store speed, refer to page 165.

Pause cruise control, refer topage 165.

Continue cruise control with thelast setting, refer to page 166.

Seite 164



Button Function

Increase speed, refer topage 165.

Reduce speed, refer to page 165.

Switching on/off and interruptingcruise control

Switching on



The indicator light in the instrumentcluster lights up.


The current speed is adopted as thedesired speed and is displayed with thesymbol in the instrument cluster.

Cruise control is active and maintains theset speed.


Switching off


The displays go out. The stored desiredspeed is deleted.

Interrupting manually

When active, press the button onthe steering wheel.

Interrupting automaticallyThe system is automatically interrupted inthe following situations:

– When the driver applies the brakes.

– If the clutch pedal is depressed for a fewseconds or released while a gear is notengaged.

– If the gear engaged is too high for thecurrent speed.

– If selector lever position N is set.

– Dynamic Traction Control DTC is acti-vated or DSC Dynamic Stability Controlis deactivated.

– If DSC Dynamic Stability Control inter-venes.

Setting the speed

Maintaining/storing the speedPress or button in the interruptedstate.

When the system is switched on, the cur-rent speed is maintained and stored as thedesired speed.

The stored speed is displayed in the instru-ment cluster.


The speed can also be stored as follows:

Press the button.

Changing the speed or button: press until the desired

speed is set.

If active, the displayed speed is stored andthe vehicle reaches the stored speed whenthe road is clear.

– or button: each time it is pressedto the point of resistance, the desired

Seite 165



speed increases or decreases by approx.1 mph/1 km/h.

– or button: each time it is pressedpast the resistance point, the desiredspeed changes by a maximum of 5 mph/10 km/h.

– or button: press button to resist-ance point and hold. The vehicle acceler-ates or decelerates without pressure onthe accelerator pedal. After the button isreleased, the vehicle maintains its finalspeed. Pressing the switch beyond theresistance point causes the vehicle toaccelerate more rapidly.

Continuing cruise control

General informationAn interrupted cruise control can be contin-ued by calling up the stored speed.

Make sure that the difference between cur-rent speed and stored speed is not too largebefore calling up the stored speed. Other-wise, unintentional braking or acceleratingmay occur.

Calling up the stored speed


The stored speed is reached again and main-tained.


Indicator light


Depending on how the vehicle isequipped, the indicator light in the instru-ment cluster indicates whether the systemis switched on.

Desired speed and stored speed


The desired speed is displayed to-gether with the symbol.

– Display lights up green: system is active,the display indicates the desired speed.

– Display lights up orange: system is in-terrupted, the display indicates thestored speed.

– No display: system is switched off.

Instrument cluster without enhanced fea-tures:

If no speed is indicated, it is possible thatthe conditions necessary for operation arenot currently fulfilled.

System limits

Engine powerThe desired speed is also maintained down-hill, but may not be maintained on uphillgrades if engine power is insufficient.

PDC Park Distance Control

ConceptPDC is a support when parking. The systemdetects objects behind the vehicle. If the ve-hicle is equipped with front PDC, objects infront of the vehicle are detected too. Ob-jects that you are approaching slowly are in-dicated by signal tones and a visual display.

General informationThe ultrasound sensors for measuring thedistances are located in the bumpers.

The delete range, depending on obstaclesand environmental conditions, is approx.6 ft/2 m.

Seite 166



An acoustic warning is first given in the fol-lowing situations:

– By the front middle sensors and the twocorner sensors at approx. 24 in/60 cmfrom the object.

– By the rear middle sensors at ap-prox. 5 ft/1.50 m from the object.

– When a collision is imminent.

Safety information

Warning

The system cannot serve as a substitutefor the driver’s personal judgment in as-sessing the traffic conditions. There is arisk of accident. Adjust driving style totraffic conditions. Watch traffic and vehi-cle surroundings closely and actively in-tervene where appropriate.

Warning

Due to high speeds when PDC Park Dis-tance Control is activated, the warning canbe delayed due to physical circumstances.There is a risk of injury or risk of damageto property. Avoid approaching an objecttoo fast. Avoid driving off fast while PDCPark Distance Control is not yet active.

Overview

With front PDC: button in vehicle

Park assistance button

Ultrasound sensors

Ultrasound sensors of thePDC, for instance in the bump-ers.

Functional requirementsEnsure full functionality:

– Do not cover sensors, for instance withstickers, bicycle racks or similar.

– Keep the sensors clean and free of ice.

Switching on/off

Switching on automaticallyThe system switches on automatically in thefollowing situations:

– If selector lever position R is engagedwhen the engine is running.

The rearview camera also switches on.

– With front PDC: when obstacles are de-tected behind or in front of the vehicleby PDC and the speed is slower than ap-prox. 2.5 mph/4 km/h.

With front PDC: automatic activation on ob-stacle detection can be switched off. Via theCentral Information Display (CID):

1. "My MINI"


3. "Parking"

4. "Automatic PDC activation": dependingon the vehicle equipment.

5. "Automatic PDC activation"

The setting is stored for the driver pro-file currently used.

Seite 167



Automatic deactivation duringforward travelThe system switches off when a certaindriving distance or speed is exceeded.

Switch the system back on, if needed.

With front PDC: switching on/offmanually

Press the park assistance button.

– On: the LED lights up.

– Off: the LED goes out.

The rearview camera image is displayed ifthe reverse gear is engaged when pressingthe park assistance button.

Depending on the equipment version, thesystem cannot be switched off manually ifthe reverse gear is engaged.

Warning

Signal tonesAn intermittent tone indicates when the ve-hicle is approaching an object. E.g., when anobject is detected to the left rear of the ve-hicle, a signal tone sounds from the left rearspeaker.

The shorter the distance to the object, theshorter the intervals.

When the distance to a detected object isless than approx. 10 inches/25 cm, a contin-uous tone is sounded.

With front PDC: when objects are simulta-neously located both in front of and behindthe vehicle, an alternating continuous sig-nal is sounded.

The signal tone is switched off, when selec-tor lever position P is engaged on vehicleswith Steptronic transmission.

VolumeThe ratio of the PDC signal tone volume tothe entertainment volume can be adjusted.

1. "My MINI"


3. "Tone"

4. "Volume settings"

5. "PDC"

6. Set the desired value.


Visual warningThe approach of the vehicle to an object canbe shown on the Control Display. Objectsthat are farther away are already displayedon the Control Display before a signalsounds.

A display appears as soon as Park DistanceControl (PDC) is activated.

The range of the sensors is represented incolors: red, green and yellow.

When the image of the rearview camera isdisplayed, the switch can be made to PDC:

"Rear view camera"

System limits

Safety information

Warning


Seite 168



With rear luggage rack or when thetrailer power socket is in useThe rear PDC functions are switched off.

Limits of ultrasonic measurementThe detection of objects with ultrasonicmeasurements can run into physical limits,for instance under the following conditions:

– For small children and animals.

– For persons with certain clothing, for in-stance coats.

– With external interference of the ultra-sound, for instance from passing vehi-cles or loud machines.

– When sensors are dirty, iced over, dam-aged or out of position.

– If cargo protrudes.

– Under certain weather conditions suchas high relative humidity, wet condi-tions, snowfall, extreme heat, or strongwind.

– With tow bars and trailer couplings ofother vehicles.

– With thin or wedge-shaped objects.

– With moving objects.

– With elevated, protruding objects suchas ledges or cargo.

– With objects with corners and sharpedges.

– With objects with a fine surface struc-ture such as fences.

– For objects with porous surfaces.

– Low objects already displayed, for in-stance curbs, can move into the blindarea of the sensors before or after a con-tinuous tone sounds.

False warningsThe system may issue a warning under thefollowing conditions even though there isno obstacle within the detection range:

– In heavy rain.

– When sensors are very dirty or coveredwith ice.

– When sensors are covered in snow.

– On rough road surfaces.

– On uneven surfaces, such as speedbumps.

– In large buildings with right angles andsmooth walls, for instance in under-ground garages.

– In automatic vehicle washes.

– Due to heavy exhaust.

– Due to other ultrasound sources, for in-stance sweeping machines, high pres-sure steam cleaners or neon lights.

The malfunction is signaled by a contin-uous tone alternating between the frontand rear speakers. As soon as the mal-function due to other ultrasound sourcesis no longer present, the system is againfully functional.

With front PDC: to reduce false alarms,switch off automatic PDC activation on ob-stacle detection, for instance in vehiclewashes; see Switching on/off.

MalfunctionA Check Control message is displayed in theinstrument cluster.

Red symbol is displayed, and therange of the sensors is dimmed onthe Control Display.

PDC has failed. Have the system checked bya dealer's service center or another qualifiedservice center or repair shop.

Seite 169



Rearview camera

ConceptThe rearview camera provides assistance inparking and maneuvering backwards. Thearea behind the vehicle is shown on theControl Display.

Safety information

Warning

The system cannot serve as a substitutefor the driver’s personal judgment in as-sessing the traffic conditions. There is arisk of accident. Adjust driving style totraffic conditions. Watch traffic and vehi-cle surroundings closely and actively in-tervene where appropriate.

Overview

Depending on the vehicle equipment:button in the vehicle


Camera

The camera lens is located in the handle ofthe trunk lid.

The image quality may be impaired by dirt.If necessary, clean the camera lens.

Switching on/off

Switching on automaticallyThe system is switched on automatically ifselector lever position R is engaged whenthe engine is running.

Automatic deactivation duringforward travelThe system switches off when a certaindriving distance or speed is exceeded.

Switch the system back on, if needed.

Depending on the vehicle equipment:switching on/off manually


– On: the LED lights up.

– Off: the LED goes out.

The parking assistance functions are shownon the Control Display.

Seite 170



Switching the view via the CentralInformation Display (CID)If the rearview camera view is not dis-played, change the view via the Central In-formation Display (CID):

"Rear view camera"

The rearview camera image is displayed.

Display on the Control Display

Functional requirements– The rearview camera is switched on.

– The trunk lid is fully closed.

– Keep the recording range of the cameraclear.

Protruding cargo or carrier systems thatare not connected to a trailer powersocket can lead to malfunctions.

Activating assistance functionsMore than one assistance function can beactive at the same time.

The zoom function for trailer operation canonly be activated separately.

– Parking aid lines

"Parking aid lines"

Lanes and turning radius lines are indi-cated.

– Obstacle marking

"Obstacle marking"

Obstacles are marked, depending on thevehicle equipment.

– Trailer hitch

"Trailer hitch - zoom"

A zoomed image of the trailer hitch isshown.

Pathway lines

Pathway lines can be superimposed on theimage of the rearview camera.

Pathway lines help you to estimate thespace required when parking and maneu-vering on level roads.

Pathway lines depend on the current steer-ing angle and are continuously adjusted tothe steering wheel movements.

Turning radius lines

Turning radius lines can be superimposedon the image of the rearview camera.

Turning radius lines show the course of thesmallest possible turning radius on a levelroad.

Only one turning radius line is displayed af-ter the steering wheel is turned past a cer-tain angle.

Seite 171



Obstacle marking

Depending on the vehicle equipment, obsta-cle markings can be faded into the image ofthe rearview camera.

The colored thresholds of the obstacle mark-ings match the markings of the PDC ParkDistance Control.

Zoom on trailer hitchTo make it easier to attach a trailer, you canzoom in on the view of the trailer hitch.

Two static circle segments show the dis-tance between the trailer and the trailerhitch.

A docking line dependent on the steeringangle helps with aiming for the trailer withthe trailer hitch.

The zoom function can be activated whenthe camera is switched on.

When zooming in, remember that the viewmay no longer show certain obstacles.

If necessary, the zoom function can also beactivated when a rear luggage rack is used.

Parking using pathway and turningradius lines1. Position the vehicle so that the turning

radius lines lead to within the limits ofthe parking space.

2. Turn the steering wheel to the pointwhere the pathway line covers the cor-responding turning radius line.

Display settings

BrightnessWith the rearview camera switched on:


2. Turn the Controller until the desired set-ting is reached and press the Controller.

ContrastWith the rearview camera switched on:


2. Turn the Controller until the desired set-ting is reached and press the Controller.

Seite 172



System limits

Detection of objectsVery low obstacles or high, protruding ob-jects such as ledges may not be recognizedby the system.

Depending on the vehicle equipment, someassistance functions also consider data fromthe PDC Park Distance Control.

Follow the notes in the PDC Park DistanceControl chapter.

The objects displayed on the Control Dis-play may be closer than they appear. There-fore, do not estimate the distance from theobjects on the display.

Parking assistant

Concept

This system assists the driver in parkingparallel to the road.

General informationParking assistant handling is divided intothree steps:

– Switching on and activating.

– Parking space search.

– Parking.

Ultrasound sensors measure parking spaceson both sides of the vehicle.

The parking assistant calculates the bestpossible parking line and takes control ofsteering during the parking procedure.

System status and instructions on requiredactions are displayed on the Control Dis-play.

A component of the parking assistant is thePDC Park Distance Control.

Safety information

Warning


Warning

If the trailer hitch is used, the driver assis-tance system can cause damage due tocovered sensors. There may be a risk of ac-cident or risk of damage to property. Thedriver assistance system should not beused during trailer towing or if the trailerhitch is used, for instance bicycle rack.

NOTICE

The parking assistant can steer the vehicleover or onto curbs. There is a risk of dam-age to property. Watch traffic closely andactively intervene where appropriate.

The safety information of the PDC Park Dis-tance Control applies in addition.

Seite 173



Overview



Ultrasound sensors

The ultrasound sensors for measuring park-ing spaces are located on the wheel hous-ing.

Functional requirements

Ultrasound sensorsEnsure full functionality:

– Do not cover sensors, for instance withstickers.

– Keep the sensors clean and unob-structed.

For measuring parking spaces– Maximum speed while driving forward

approx. 22 mph/35 km/h.

– Maximum distance to row of parked ve-hicles: 5 ft/1.5 m.

Suitable parking space– Gaps behind an object that has a min.

length of 5 ft/1.5 m.

– Gap between two objects with a mini-mum length of approx. 5 ft/1.5 m.

– Min. length of gap between two objects:your vehicle's length plus approx.3.3 ft/1.0 m.

– Minimum depth: approx. 5 ft/1.5 m.

For parking– Doors and trunk lid are closed.

– The parking brake is released.

– When parking in parking spaces on thedriver's side, the corresponding turn sig-nal must be switched on.

Switching on and activating

Switching on with the button


The LED lights up.

The current status of the parking spacesearch is indicated on the Control Display.

Parking assistant is activated automati-cally.

Switching on with reverse gearShift into reverse.

The current status of the parking spacesearch is indicated on the Control Display.

To activate: "Parking Assistant"

Seite 174



Display on the Control Display

System activated/deactivated

Symbol Meaning

Gray: the system is not availa-ble.

White: the system is availablebut not activated.

The system is activated.

Parking space search and systemstatus

– Symbol P on the vehicle image: the park-ing assistant is activated and the park-ing space search is active.

– Control Display shows suitable parkingspaces at the edge of the road next tothe vehicle symbol. When the parkingassistant is active, suitable parkingspaces are highlighted.

– The parking procedure isactive. The system takesover the steering.

– Parking space search is always activewhenever the vehicle is moving forwardslow and straight, even if the system isdeactivated. When the system is deacti-vated, the displays on the Control Dis-play are shown in gray.

Parking using the parking assistant

Parking

1. Press the park assistance button orshift into reverse gear to switch on theparking assistant, refer to page 174. Ac-tivate the parking assistant, if needed.

Parking assistant is activated.

2. Pass the row of parked vehicles at aspeed of up to approx. 22 mph/35 km/hand at a distance of maximum5 ft/1.5 m.

The status of the parking space searchand possible parking spaces are dis-played on the display, refer to page 175.

3. Follow the instructions on the display.

The best possible parking position willcome after gear change on the station-ary vehicle - wait for the automaticsteering wheel move.

The end of the parking procedure is in-dicated on the display.

4. Adjust the parking position yourself, ifneeded.

Interrupting manuallyThe parking assistant can be interrupted atany time:

– Press the park assistance button.

– "Parking Assistant"

Interrupting automaticallyThe system is interrupted automatically inthe following situations:

– If the driver grasps the steering wheelor takes over steering.

– If a gear is selected that does not matchthe instruction on the display.

Seite 175



– If the vehicle speed exceeds approx.6 mph/10 km/h.

– Possibly on snow-covered or slipperyroad surfaces.

– If a maximum number of parking at-tempts or the time taken for parking isexceeded.

– If the PDC Park Distance Control dis-plays clearances that are too small.

– When switching into other functions ofthe radio.


ResumingAn interrupted parking procedure can becontinued, if needed.

Reactivate the parking assistant, refer topage 174, and follow the instructions on thedisplay.

Switching offThe system can be switched off as follows:

– Press the park assistance button.

– Switching off the ignition.

System limits

Safety information

Warning


No parking assistanceThe parking assistant does not offer assis-tance in the following situations:


– With mounted rear luggage rack.

Functional limitationsThe system may not be fully functional inthe following situations:

– On bumpy road surfaces such as gravelroads.

– On slippery ground.

– With accumulations of leaves/snow inthe parking space.

– With a mounted emergency wheel.

– With ditches or edges, for instance anedge of a port.

Limits of ultrasonic measurementThe detection of objects with ultrasonicmeasurements can run into physical limits,for instance under the following conditions:

– For small children and animals.

– For persons with certain clothing, for in-stance coats.

– With external interference of the ultra-sound, for instance from passing vehi-cles or loud machines.

– When sensors are dirty, iced over, dam-aged or out of position.

– If cargo protrudes.

– Under certain weather conditions suchas high relative humidity, wet condi-tions, snowfall, extreme heat, or strongwind.

– With tow bars and trailer couplings ofother vehicles.

– With thin or wedge-shaped objects.

– With moving objects.

Seite 176



– With elevated, protruding objects suchas ledges or cargo.

– With objects with corners and sharpedges.

– With objects with a fine surface struc-ture such as fences.

– For objects with porous surfaces.

– Low objects already displayed, for in-stance curbs, can move into the blindarea of the sensors before or after a con-tinuous tone sounds.

– The parking assistant may identify park-ing spaces that are not suitable for park-ing.

Tire sizeThe parking position may vary dependingon the tire size.

MalfunctionA Check Control message is displayed.

The parking assistant failed. Have the sys-tem checked by a dealer's service center oranother qualified service center or repairshop.

Seite 177



Climate control



Interior air quality

The air quality in the vehicle is improved bythe following components:

– Emission tested passenger compart-ment.

– Microfilter.

– Air conditioning system to control thetemperature, air flow and recirculated-air mode.

Depending on the equipment specification:

– Microfilter/activated-charcoal filter.

– Automatic climate control.

– Parked-car ventilation.

Seite 178

CONTROLS Climate control


Air conditioner

1 Air distribution settings

2 Air flow

3 Temperature

4 Seat heating, right 74

5 Air conditioning

6 Recirculated-air mode

7 Rear window defroster

8 Windshield defroster

9 Seat heating, left 74

Climate control functions in detail


Switching on

Set any air flow.

Switching off

Turn the wheel for air flow allthe way to the left.

Temperature

Concept

The system heats or cools, depending on theset temperature.

Adjusting

Turn the wheel to set the de-sired temperature.

Seite 179

Climate control CONTROLS


Air conditioning

Concept

The air in the car's interior will be cooledand dehumidified and, depending on thetemperature setting, warmed again.

The car's interior can only be cooled withthe engine running.

Switching on/off

Press the button.

The LED is illuminated with air con-ditioning switched on.

Depending on the weather, the windshieldmay fog up briefly when the engine isstarted.

The air conditioner produces condensationwater, refer to page 207, that will exit frombelow the vehicle.

Recirculated-air mode

Concept

You may react to unpleasant odors or pollu-tants in the immediate environment by tem-porarily suspending the supply of outsideair. The system then recirculates the airflow within the vehicle.

Operation

Press the button:

The LED is illuminated when recir-culated-air mode is switched on. The supplyof outside air is shut off.

When recirculated-air mode is switched off,fresh air is directed into the vehicle's inte-rior.

To prevent window condensation, recircu-lated-air mode switches off automatically af-ter a certain amount of time, depending onthe external temperature.

With constant recirculated-air mode, the airquality in the car's interior deteriorates andwindow fogging increases.

If the windows fog over, switch off recircu-lated-air mode and increase the air flow, ifneeded.

Controlling the air flow manually

Concept

The air flow for climate control can be ad-justed manually.

Operation

Turn the ring to set the de-sired air flow.

The higher the air flow, themore effective the heating orcooling will be.

The air flow from the air conditioner may bereduced automatically to save batterypower.

Controlling the air distributionmanually

Concept

The air distribution for climate control canbe adjusted manually.

Operation

Turn the wheel to select thedesired program or the desiredintermediate setting.

– Windows.

– Upper body region.

– Floor area.

– Windows, upper body region, andfloor area.

Seite 180



To defrost windows and removecondensationMake the following settings to defrost thewindows and remove condensation:

– Direct the air distribution onto the win-dows.

– Increasing the air flow.

– Increase the temperature.

– Switch on the air conditioning if needed.

Windshield defroster

Press the button. The LED lights up.

The front window defrosterswitches off automatically after a certainperiod of time.

Rear window defroster


The rear window defroster switchesoff automatically after a certain period oftime.

When GREEN Mode is activated, the heat-ing output is reduced.

MicrofilterIn external and recirculated-air mode, themicrofilter filters dust and pollen from theair.

Have this filter changed during vehiclemaintenance, refer to page 274.

Automatic climate control

1 Temperature, left

2 Display

3 Air flow, AUTO intensity

4 AUTO program

5 Air distribution, manual

6 Display

7 Temperature, right

8 Seat heating, right 74

Seite 181



9 Maximum cooling

10 Air conditioning

11 Recirculated-air mode

12 Rear window defroster

13 Windshield defroster

14 To defrost windows and remove conden-sation

15 Seat heating, left 74

Climate control functions in detail


Switching on

Set any air flow.

Switching off

Turn wheel for air flow to theleft until the control switchesoff.

Temperature

Concept

The automatic climate control achieves theset temperature as quickly as possible, ifnecessary by using the maximum cooling orheating power, and then keeps it constant.

Adjusting

Turn the wheel to set the de-sired temperature.

Do not rapidly switch between differenttemperature settings. The automatic climatecontrol will not have sufficient time to ad-just the set temperature.

Air conditioning

Concept

The air in the car's interior will be cooledand dehumidified and, depending on thetemperature setting, warmed again.

The car's interior can only be cooled withthe engine running.

Switching on/off

Press the button.

The LED is illuminated with air con-ditioning switched on.

Depending on the weather, the windshieldmay fog up briefly when the engine isstarted.

The cooling function is switched on auto-matically with the AUTO program.

When using the automatic climate control,condensation water, refer to page 207, de-velops and drains underneath the vehicle.This is normal.

Maximum cooling

Concept

The system is set to the lowest temperature,maximum air flow and recirculated-airmode.

General information

The function is available with external tem-peratures beyond approx. 32 ℉/0 ℃ andwith the engine running.

Air flows out of the vents to the upper bodyregion. The vents need to be open for this.

Seite 182



The air flow can be adjusted with the pro-gram active.

Switching on/off

Press the button.

The LED is illuminated with thesystem switched on.

AUTO program

Concept

The AUTO program cools, ventilates orheats the car's interior automatically.

The air distribution and temperature arecontrolled automatically depending on thetemperature in the car's interior and the de-sired temperature setting including the se-lected intensity of the air flow.

Switching on/off

Press the button.

The LED is illuminated with theAUTO program switched on.

Depending on the selected temperature,AUTO intensity and outside influences, theair is directed to the windshield, side win-dows, upper body, and into the floor area.

Point the side vents toward the side win-dows.

The following features are switched on au-tomatically with the AUTO program:

– The air conditioning, refer to page 182.

To switch off the program: press the buttonagain or manually adjust the air distribu-tion.

Intensity

With the AUTO program activated, the au-tomatic intensity control can be changed.

Turn the ring to set the de-sired intensity from soft to in-tensive.

The set intensity is displayed via the posi-tion of the illuminated LED segment.

Convertible program

When the convertible top is open, theconvertible program is activated as well. Inthe convertible program, the automatic cli-mate control is optimized for driving withthe convertible top open. In addition, the airflow is increased as the vehicle speed in-creases.

The efficiency of the convertible programcan be greatly enhanced by installing thewind deflector.

Recirculated-air mode

Concept

You may react to unpleasant odors or pollu-tants in the immediate environment by tem-porarily suspending the supply of outsideair. The system then recirculates the airflow within the vehicle.

Operation

Press the button:

The LED is illuminated when recir-culated-air mode is switched on. The supplyof outside air is shut off.

When recirculated-air mode is switched off,fresh air is directed into the vehicle's inte-rior.

To prevent window condensation, recircu-lated-air mode switches off automatically af-ter a certain amount of time, depending onthe external temperature.

Seite 183



With constant recirculated-air mode, the airquality in the car's interior deteriorates andwindow fogging increases.

If the windows fog over, switch off recircu-lated-air mode and increase the air flow, ifneeded.

Adjusting the air flow manually

Concept

The air flow for climate control can be ad-justed manually.

General information

To adjust the air flow manually switch offAUTO program first.

Operation

Turn the ring to set the de-sired air flow.

The manually adjusted air flow is displayedvia illuminated LED segments.

The air flow of the automatic climate con-trol may be reduced automatically to savebattery power.

Adjusting the air distributionmanually

Concept

The air distribution for climate control canbe adjusted manually.

Operation

Press the button repeatedly to se-lect a program:

– Windows, upper body region, and floorarea.

– Upper body region and floor area.

– Floor area.

– Windows and floor area.

– Windows.

– Windows and upper body region.

– Upper body region.

To defrost windows and removecondensation

Concept

Ice and condensation are quickly removedfrom the windshield and the front side win-dows.

Switching on/off

Press the button.

The LED is illuminated with thesystem switched on.

The air flow can be adjusted with the pro-gram active.

If there is window condensation, switch onthe air conditioning too.

Windshield defroster


The front window defrosterswitches off automatically after a certainperiod of time.

Rear window defroster


The rear window defroster switchesoff automatically after a certain period oftime.

When GREEN Mode is activated, the heat-ing output is reduced.

Microfilter/activated-charcoal filterIn external and recirculated-air mode, themicrofilter/activated charcoal filter filters

Seite 184



dust, pollen, and gaseous pollutants out ofthe air.

Have this filter changed during vehiclemaintenance, refer to page 274.

Ventilation

SettingThe air flow directions can be individuallyadjusted:

– Direct ventilation:

The air flow is directly pointed onto theperson. The air flow heats or cools no-ticeably, depending on the adjusted tem-perature.

– Indirect ventilation:

If the vents are fully or partly closed, theair is directly routed into the car's inte-rior.

Front ventilation

– Turn knob for continuous opening andclosing of the vents.

– Swivel the vents to alter the direction ofthe vent flow, arrows.

Parked-car ventilation

ConceptThe parked-car ventilation ventilates thecar's interior and lowers its temperature, ifneeded.

General informationThe parked-car ventilation can be switchedon and off directly or by using two presetactivation times. The system remainsswitched on for 30 minutes.

The parked-car ventilation system is oper-ated via the Central Information Display(CID).

Functional requirements– Direct operation: vehicle is in radio-

ready state.

– Direct operation or preset activationtime: does not depend on external tem-perature.

– Battery is sufficiently charged.

If parked-car ventilation is switched on,the vehicle battery will be discharged.Thus, limit the maximum activation timeto save the vehicle battery. The systemwill be available again after the engineis started or after a short trip.

– Make sure that the vehicle's date andtime are set correctly.

– Open the vents to allow air to flow out.

Switching on/off directlyVia the Central Information Display (CID):

1. "My MINI"


3. If necessary, "Climate functions"

4. "Activate comfort ventilation now"

Seite 185



The symbol on the automatic climatecontrol flashes if the system is switched on.

Preselecting the activation timeVia the Central Information Display (CID):

1. "My MINI"



4. "Comfort ventilation"

5. Select the desired activation time.

6. Set the desired time.

Activating the activation timeVia the Central Information Display (CID):

1. "My MINI"



4. "For start time at:"

Activate the desired activation time.

The symbol on the automatic climatecontrol lights up when the activation time isactivated.

The symbol on the automatic climatecontrol flashes when the system has beenswitched on.

The system will only be switched on withinthe next 24 hours. After that, it needs to bereactivated.

Seite 186



Interior equipment



Integrated Universal RemoteControl

ConceptThe integrated Universal Remote Control inthe interior mirror can operate up to 3 func-tions of remote-controlled systems such asgarage door drives, barriers, or lighting sys-tems.

General informationThe Integrated Universal Remote Controlreplaces up to 3 different hand-held trans-mitters. To operate the remote control, thebuttons on the interior mirror must be pro-grammed with the desired functions. Thehand-held transmitter for the particular sys-tem is required in order to program the re-mote control.

Before selling the vehicle, delete the storedfunctions for the sake of security.

If possible, do not install the antenna of theremote-controlled system, e.g. the garagedoor drive, near metal objects to ensure thebest possible operation.

Safety information

Warning

The operation of remote-controlled sys-tems with the integrated universal remotecontrol, such as the garage door, may re-sult in injury, for example, body parts be-coming jammed in a garage door. There isa risk of injury or risk of damage to prop-erty. Make sure that the area of movementof the respective system is clear duringprogramming and operation. Also followthe safety information of the hand-heldtransmitter.

CompatibilityIf this symbol is printed on the pack-aging or in the owner's manual of thesystem to be controlled, the system

is generally compatible with the integratedUniversal Remote Control.

Additional questions are answered by:

– A dealer's service center or anotherqualified service center or repair shop.

– www.homelink.com on the Internet.

HomeLink is a registered trademark of Gen-tex Corporation.

Seite 187

Interior equipment CONTROLS


Overview

1 LED

2 Programmable keys

3 Hand-held transmitters of the system

Programming

General informationThe battery of the hand-held transmittermust be fully charged at the time of pro-gramming to ensure an optimal range of theintegrated universal remote control.


2. Initial setup:

Press and hold the two outer buttons onthe interior mirror simultaneously forapproximately 10 seconds until the LEDflashes green rapidly. This erases all pro-gramming of the buttons on the interiormirror.

3. Press the interior mirror button to beprogrammed. The LED on the interiormirror will slowly begin flashing orange.

4. Hold the hand-held transmitter for thesystem to be used approx. 1 to 12 in/2.5to 30 cm away from the buttons on theinterior mirror. The required distancedepends on the hand-held transmitter.

5. Press and hold the button of the desiredfunction on the hand-held transmitter.

Canada: if programming with the hand-held transmitter was interrupted, hold

down the interior mirror button and re-peatedly press and release the hand-heldtransmitter button for 2 seconds.

6. – The LED lights up green: program-ming completed.

Release the button.

– The LED flashes fast: programmingis not complete.

Press the button on the interior mir-ror for 2 seconds and release. Per-form this procedure three times tocomplete the programming proce-dure.

If the integrated universal remotecontrol remains nonoperational, con-tinue with the special features forchange code wireless systems.

– LED does not flash green after60 seconds: programming not com-pleted.

Repeat steps 3 to 6.

To program other functions on other but-tons, repeat steps 3 to 5.

Special feature of the rolling codewireless systemIf you are unable to operate the system af-ter repeated programming, please check ifthe system to be controlled features a roll-ing code radio system.

Refer to the owner's manual for the system.

For systems with a rolling code radio sys-tem, the integrated Universal Remote Con-trol and the system also have to besynchronized.

Please read the owner's manual to find outhow to synchronize the system.

Synchronizing is easier with the aid of asecond person.

Seite 188

CONTROLS Interior equipment


Synchronizing the universal remote controlwith the system:

1. Park the vehicle within range of the re-mote-controlled system.

2. Program the relevant button on the inte-rior mirror as described.

3. Locate and press the synchronizing but-ton on the system being programmed,e.g. at the garage gate. You have approx.30 seconds for the next step.

4. Hold down the programmed button onthe interior mirror for approximately3 seconds and then release it. If neces-sary, repeat this step up to three timesin order to finish synchronization. Oncesynchronization is complete, the pro-grammed function will be carried out.

Reprogramming individual buttons1. Switch on the ignition.

2. Press and hold the interior mirror but-ton to be programmed.

3. As soon as the LED on the interior mir-ror flashes orange after approx. 20 sec-onds, release the button.

4. Hold the hand-held transmitter for thesystem to be used approx. 1 to 12 in/2.5to 30 cm away from the buttons on theinterior mirror. The required distancedepends on the hand-held transmitter.

5. Press and hold the button of the desiredfunction on the hand-held transmitter.

Canada: if programming with the hand-held transmitter was interrupted, holddown the interior mirror button and re-peatedly press and release the hand-heldtransmitter button for 2 seconds.

6. The LED can light up in different ways.

– The LED lights up green: the pro-gramming procedure is completed.

Release the button.

– The LED flashes fast: the hand-heldtransmitter was detected but pro-gramming is not complete.

Press the button on the interior mir-ror for 2 seconds and release. Per-form this procedure three times tocomplete the programming proce-dure.

If the integrated universal remotecontrol remains nonoperational, con-tinue with the special features forchange code wireless systems.

– LED does not flash green after60 seconds: programming not com-pleted.

Repeat steps 3 to 6.

If the programming procedure is not com-pleted, the previous programming will re-main unchanged.

Operation

Warning

The operation of remote-controlled sys-tems with the integrated universal remotecontrol, such as the garage door, may re-sult in injury, for example, body parts be-coming jammed in a garage door. There isa risk of injury or risk of damage to prop-erty. Make sure that the area of movementof the respective system is clear duringprogramming and operation. Also followthe safety information of the hand-heldtransmitter.

The system, such as the garage door, can beoperated using the button on the interiormirror while the engine is running or whenthe ignition is started. To do this, hold downthe button within receiving range of thesystem until the function is activated. Theinterior mirror LED stays lit while the wire-less signal is being transmitted.

Seite 189



Deleting stored functionsAll stored functions will be deleted. Thefunctions cannot be deleted individually.

Press and hold the two outer buttons on theinterior mirror simultaneously for approxi-mately 10 seconds until the LED on the in-terior mirror flashes green rapidly.

Digital compass

Overview

1 Control button

2 Mirror display

Mirror displayThe compass shows the current driving di-rection.

Operating conceptVarious functions can be called up by press-ing the control button with a pointed object,such as the tip of a ballpoint pen or similarobject. The following setting options aredisplayed in succession, depending on howlong the control button is pressed:

– Pressed briefly: turns display on/off.

– 3 to 6 seconds: compass zone setting.

– 6 to 9 seconds: compass calibration.

– 9 to 12 seconds: left/right-hand steeringsetting.

– 12 to 15 seconds: language setting.

Setting the compass zonesSets the particular compass zones on the ve-hicle so that the compass operates correctly;refer to World map with compass zones.

Seite 190



World map with magnetic zones

Procedure1. Press and hold the control button for ap-

prox. 3 to 4 seconds. The number of theset compass zone appears in the mirror.

2. To change the zone setting, press thecontrol button quickly and repeatedlyuntil the number of the compass zonethat corresponds with your location ap-pears in the mirror.

The set zone is stored automatically. Thecompass is ready for use again after approx-imately 10 seconds.

Calibrating the digital compassThe digital compass must be calibrated inthe event of the following:

– The wrong compass point is displayed.

– The point of the compass displayed doesnot change despite changing the direc-tion of travel.

– Not all points of the compass are dis-played.

Procedure1. Make sure that there are no large metal-

lic objects or overhead power lines nearthe vehicle and that there is sufficientroom to drive around in a circle.

2. Set the currently applicable compasszone.

3. Make sure that the convertible top iscompletely closed.

4. Press and hold the control button for ap-prox. 6 to 7 seconds so that "C" appearson the display. Next, drive in a completecircle at least once at a speed of no morethan 4 mph/7 km/h. If calibration is suc-cessful, the "C" is replaced by the pointsof the compass.

5. Open convertible top completely.

6. Press and hold the control button for ap-prox. 6 to 7 seconds so that "C" appearson the display. Next, drive in a completecircle at least once at a speed of no morethan 4 mph/7 km/h. If calibration is suc-

Seite 191



cessful, the "C" is replaced by the pointsof the compass.

Left/right-hand steeringThe digital compass is already set for rightor left-hand steering at the factory.

Setting the languagePress and hold the control button for ap-prox. 12 to 13 seconds. Briefly press thecontrol button again to switch betweenEnglish "E" and German "O".

Settings are stored automatically after ap-proximately 10 seconds.

Sun visor

Glare shieldTo provide protection against glare, fold thesun visor down or pivot it to the side.

Vanity mirrorA vanity mirror is located in the sun visorbehind a cover.

Front passenger side dash-board

Decorative trim

Customized decorative trim panels for thedashboard on the front passenger side areavailable as original MINI accessories de-pending on the equipment specification.

Follow the assembly instructions.

Ashtray/cigarette lighter

Overview

The ashtray is located in one of the frontalcup holders, the cigarette lighter above it inthe center console.

AshtrayIn order to empty the ashtray, remove theashtray from the cup holder.

Seite 192



Cigarette lighter

Safety information

Warning

Contact with the hot heating element orthe hot socket of the cigarette lighter cancause burns. Flammable materials can ig-nite if the cigarette lighter falls down or isheld against the objects. There is a risk offire and injuries. There is a risk of damageto property. Take hold of the cigarettelighter by its handle. Make sure that chil-dren do not use the cigarette lighter.

NOTICE

If metal objects fall into the socket, theycan cause a short circuit. There is a risk ofdamage to property. Replace the cigarettelighter or socket cover again after usingthe socket.

Operation

Push in the cigarette lighter.

The cigarette lighter can beremoved as soon as it popsback out.

Sockets

ConceptThe lighter socket can be used as a socketfor electrical equipment while the ignitionis switched on or the engine is running.

General informationThe total load of all sockets must not exceed140 watts at 12 volts.

Do not damage the socket by using non-compatible connectors.

Safety information

Warning

Devices and cables in the unfolding area ofthe airbags, such as portable navigationdevices, can hinder the unfolding of theairbag or be thrown around in the car's in-terior during unfolding. There is a risk ofinjury. Make sure that devices and cablesare not in the airbag's area of unfolding.

NOTICE

Battery chargers for the vehicle batterycan work with high voltages and currents,which means that the 12 volt on-boardnetwork can be overloaded or damaged.There is a risk of damage to property. Onlyconnect battery chargers for the vehiclebattery to the starting aid terminals in theengine compartment.

NOTICE

If metal objects fall into the socket, theycan cause a short circuit. There is a risk ofdamage to property. Replace the cigarettelighter or socket cover again after usingthe socket.

Seite 193



In the center console

Remove the cover or cigarette lighter.

In the cargo area

The socket is located on the right side inthe cargo area.

USB port

General informationFollow the information regarding the con-nection of mobile devices to the USB port inthe section on USB connections, refer topage 48.

In the center console

The USB port is located in the front of thecenter console.

Properties:

– USB port Type A.

– For charging mobile devices and fordata transfer.

– Charge current: max. 1.5 A.

Seite 194



Storage compartments



Safety information

Warning

Loose objects or devices with a cable con-nection to the vehicle, for instance mobilephones, can be thrown about the car's in-terior while driving, for instance in theevent of an accident, braking or evasivemaneuver. There is a risk of injury. Secureloose objects or devices with a cable con-nection to the vehicle in the car's interior.

NOTICE

Anti-slip pads such as anti-slip mats candamage the dashboard. There is a risk ofdamage to property. Do not use anti-slippads.

Overview

The following storage compartments areavailable in the car's interior:

– Glove compartment on the front passen-ger side.

– Compartments in the doors.

– Storage compartment in the center arm-rest.

– Storage compartment in front of the cupholders.

– Storage compartments in the cargo area.

– Storage tray in the center console.

– Pockets on the backrests of the frontseats.

Glove compartment

Safety information

Warning

Folded open, the glove compartment pro-trudes in the car's interior. Objects in theglove compartment can be thrown into thecar's interior while driving, for instance inthe event of an accident, braking or eva-sive maneuvers. There is a risk of injury.Always close the glove compartment im-mediately after using it.

Seite 195

Storage compartments CONTROLS


Opening

Pull the handle.

The light in the glove compartmentswitches on.

ClosingFold up the cover.

LockingThe glove compartment can be locked withan integrated key to separately secure thetrunk lid, for instance.

This prevents access to the glove compart-ment and to the cargo area.

After the glove compartment is locked, thevehicle key can be handed over, such as at ahotel, without the integrated key.

Compartments in the doors

General informationThere are storage compartments in thedoors.

Safety information

Warning

Breakable objects, such as glass bottles orglasses, can break in the event of an acci-dent or a braking or evasive maneuver.Broken glass can be scattered in the car's

interior. There is a risk of injury or risk ofdamage to property. Do not use any break-able objects while driving. Only stowbreakable objects in closed storage com-partments.

Center armrest

General informationThe center armrest contains a storage com-partment.

Opening

Press button, arrow 1, and open center arm-rest upward, arrow 2.


Press button, arrow 1, and swing centerarmrest upward or downward into the de-sired height, arrow 2.

Seite 196

CONTROLS Storage compartments


Cup holders

Safety information

Warning

Unsuitable containers in the cup holdersmay damage the cup holders or be thrownabout the car’s interior in the event of anaccident, an evasive maneuver, or forcefulbraking. Spilled liquids can distract fromthe traffic conditions and lead to an acci-dent. Hot drinks can damage the cupholder or lead to scalding. There is a riskof injury or risk of damage to property. Donot force objects into the cup holder. Uselightweight, shatterproof, and sealablecontainers. Do not transport hot bever-ages.

Front

In the center console.

Rear

In front of the rear seats.

Seite 197

Storage compartments CONTROLS


Cargo area



Loading

Safety information

Warning

High gross weight can overheat the tires,damage them internally and cause a sud-den drop in tire inflation pressure. Drivingcharacteristics may be negatively im-pacted, reducing lane stability, lengthen-ing the braking distances and changingthe steering response. There is a risk ofaccident. Pay attention to the permittedload capacity of the tires and never exceedthe permitted gross weight.

Warning

Loose objects or devices with a cable con-nection to the vehicle, for instance mobilephones, can be thrown about the car's in-terior while driving, for instance in theevent of an accident, braking or evasivemaneuver. There is a risk of injury. Secure

loose objects or devices with a cable con-nection to the vehicle in the car's interior.

Warning

Improperly stowed objects can shift andbe thrown into the car's interior, for in-stance in the event of an accident or dur-ing braking and evasive maneuver. Vehi-cle occupants can be hit and injured. Thereis a risk of injury. Stow and secure objectsand cargo properly.

NOTICE

Fluids in the cargo area can cause damage.There is a risk of damage to property.Make sure that no fluids leak in the cargoarea.

Steps for Determining Correct LoadLimit1. Locate the statement “The combined

weight of occupants and cargo shouldnever exceed XXX kg or XXX lbs” onyour vehicle’s placard.

2. Determine the combined weight of thedriver and passengers that will be ridingin your vehicle.

3. Subtract the combined weight of thedriver and passengers from XXX kg orXXX lbs

4. The resulting figure equals the availableamount of cargo and luggage load ca-pacity. For example, if the “XXX”amount equals 1,400 lbs and there willbe five 150 lbs passengers in your vehi-cle, the amount of available cargo and

Seite 198

CONTROLS Cargo area


luggage load capacity is 650 lbs (1,400 -750 (5 x 150) = 650 lbs)

5. Determine the combined weight of lug-gage and cargo being loaded on the ve-hicle. That weight may not safely exceedthe available cargo and luggage load ca-pacity calculated in Step 4.

6. If your vehicle will be towing a trailer,load from your trailer will be transferredto your vehicle. Consult this manual todetermine how this reduces the availa-ble cargo and luggage load capacity ofyour vehicle.

Load

The maximum load is the sum of the weightof the occupants and the cargo.

The greater the weight of the occupants,the less cargo that can be transported.

Stowing and securing cargo– Cover sharp edges and corners on the

cargo.

– Heavy cargo: stow as far forward as pos-sible, directly behind and at the bottomof the rear passenger seat backrests.

– Very heavy cargo: when the rear seat isnot occupied, secure each of the outersafety belts in the opposite buckle.

– If necessary, fold down the rear back-rests to stow large cargo.

– Do not stack cargo above the top edge ofthe backrests.

– Small and light cargo: secure withratchet straps or draw straps.

– Larger and heavy cargo: secure withcargo straps.

Loading aid

ConceptFor easier loading, the vehicle is equippedwith loading aid. When the loading aid isopened, objects can be stowed that wouldnot otherwise fit through the trunk lidopening.

Safety information

Warning

When opening and closing the loading aid,body parts can be jammed, for instance bythe mechanism. There is a risk of injury.Make sure that the area of movement ofthe loading aid is clear during operation.

Warning

With a lifted loading aid, vehicle parts canprotrude and limit the view. There is adanger of accidents and property damage.Before driving off, make sure that the load-ing aid is completely lowered and thetrunk lid is closed.

Seite 199

Cargo area CONTROLS


Opening the loading aid1. Unlock the convertible top using the

handles, arrows 1.

2. Lift convertible top, arrow 2.

3. Fold back the handles and place on thebrackets, arrows 3.

Closing the loading aid1. Remove handles from the brackets.

2. Push convertible top down and hold.

3. Push the handles outward to lock theconvertible top.

4. Check that the convertible top is locked.

Lashing eyes in the cargo area

To secure the cargo there are two lashingeyes in the cargo area.

Attach load securing aids, such as lashingstraps, tensioning straps, draw straps orcargo nets, to the lashing eyes in the cargoarea.

Storage space under cargofloor panel

Located under the cargo floor panel on theright side is a trough for the onboard vehi-cle tool kit.

Fold the right side of the cargo floor panelupward to remove the onboard vehicle toolkit.

Enlarging the cargo area

ConceptThe cargo area can be enlarged as follows:

– The rear seat backrests can be foldeddown.

– The cargo area partition can be swungupward when the convertible top isclosed.

General informationThe rear seat backrest is divided into twoparts at a ratio of 50 to 50.

The rear seat backrests can be folded downfrom the cargo area.

Seite 200

CONTROLS Cargo area


Safety information

Warning

Danger of jamming with folding down thebackrests. There is a risk of injury or riskof damage to property. Make sure that thearea of movement of the rear backrest andthe of the head restraint is clear prior tofolding down.

Warning

If a rear seat backrest is not locked, unse-cured cargo can be thrown about the car’sinterior; for instance, in the event of an ac-cident, braking or an evasive maneuver.There is a risk of injury. Make sure thatthe rear seat backrest is locked after fold-ing it back.

Warning


Warning


Folding down the rear seatbackrest from the cargo area1. Before the backrest is folded down, re-

move the respective safety belt from therear belt guide, refer to page 76.

2. Pull the lever.

3. Fold the rear seat backrest forward.

Folding back the backrest1. Fold up the backrest and press it into

the latch. Make sure that the safety beltis not caught behind the backrest or inbetween the backrest and the rear seats.

2. Close the belt guide loop of the rear beltguide, refer to page 76.

Cargo area partition1. Fold the convertible top upward as de-

scribed under Loading aid, refer topage 200.

2. Swing the cargo area partition upwardand pull backward out of the lower sup-ports, arrows 1.

Seite 201

Cargo area CONTROLS


3. Insert the cargo area partition into theupper supports, arrows 2, until it en-gages and place down horizontally.

The loading aid cannot be locked if thecargo area partition is not fully insertedinto the upper supports.

4. Fold the convertible top downward asdescribed under Loading aid, refer topage 200, and lock it.

Return the cargo area partition into thelower position so that the convertible topcan be used.

Seite 202

CONTROLS Cargo area


Seite 203

Cargo area CONTROLS


Things to remember when driving



Breaking-in period

General informationMoving parts need to begin working to-gether smoothly.

The following instructions will help you toachieve a long vehicle life and good effi-ciency.

During break-in, do not use the LaunchControl, refer to page 107.

Safety information

Warning

Due to new parts and components, safetyand driver assistance systems can reactwith a delay. There is a risk of accident.After installing new parts or with a newvehicle, drive conservatively and inter-vene early if necessary. Observe the break-in procedures of the respective parts andcomponents.

Engine, transmission, and axledrive

Up to 1,200 miles/2,000 kmDo not exceed the maximum engine androad speed:

– For gasoline engine 4,500 rpm and100 mph/160 km/h.

Avoid full load or kickdown under all cir-cumstances.

From 1,200 miles/2,000 kmThe engine and vehicle speed can graduallybe increased.

TiresTire traction is not optimal due to manufac-turing circumstances when tires are brand-new; they achieve their full traction poten-tial after a break-in time.

Drive conservatively for the first200 miles/300 km.

Brake systemBrake discs and brake pads only reach theirfull effectiveness after ap-prox. 300 miles/500 km. Drive moderatelyduring this break-in period.

ClutchThe function of the clutch reaches its opti-mal level only after a distance driven of ap-prox. 300 miles/500 km. During this break-in period, engage the clutch gently.

Following part replacementThe same break-in procedures should be ob-served if any of the components mentioned

Seite 204

DRIVING TIPS Things to remember when driving


above have to be renewed in the course ofthe vehicle's operating life.

General driving notes

Closing the trunk lid

Safety information

Warning

An open trunk lid protrudes from the vehi-cle and can endanger occupants and othertraffic participants or damage the vehiclein the event of an accident, braking or eva-sive maneuvers. In addition, exhaustfumes may enter the car's interior. Thereis a risk of injury or risk of damage toproperty. Do not drive with the trunk lidopen.

Driving with the trunk lid openIf driving with the tailgate open cannot beavoided:

– If the convertible top is closed, close allwindows and the sliding sun roof.

– Greatly increase the air flow from thevents.

– Drive moderately.

Ice on window glass

NOTICE

The window will be lowered slightly whenpulling on the door handle. In the event offrost, the window may freeze up and notbe lowered. There is a risk of damage toproperty. When pulling on the door han-dle, make sure that the window is lowered.If necessary, remove snow and ice from

the window. Do not open the door withforce.

Hot exhaust gas system

Warning

High temperatures can occur underneaththe body, for instance caused by the ex-haust gas system, while driving. Contactwith the exhaust gas system can causeburns. There is a risk of injury. Do nottouch the hot exhaust gas system, includ-ing the exhaust pipe.

Warning

If combustible materials, such as leaves orgrass, come in contact with hot parts ofthe exhaust gas system, these materialscan ignite. There is a risk of fire and inju-ries. Do not remove the heat shields instal-led and never apply undercoating to them.Make sure that no combustible materialscan come in contact with hot vehicle partsin driving operation, idle or during park-ing.

Mobile communication devices inthe vehicle

Warning

Vehicle electronics and mobile phones caninfluence one another. There is radiationdue to the transmission operations of mo-bile phones. There is a risk of injury orrisk of damage to property. If possible, inthe car's interior use only mobile phoneswith direct connections to an exterior an-tenna in order to exclude mutual interfer-ence and deflect the radiation from thecar's interior.

Seite 205

Things to remember when driving DRIVING TIPS


HydroplaningOn wet or slushy roads, a wedge of watercan form between the tires and road sur-face.

This phenomenon is referred to as hydro-planing. It is characterized by a partial orcomplete loss of contact between the tiresand the road surface, ultimately undermin-ing your ability to steer and brake the vehi-cle.

Driving through water

General informationWhen driving through water, follow the fol-lowing:

– Deactivate Auto Start/Stop function.

– Drive through calm water only.

– Drive through water only if it is notdeeper than maximum 9.8 inches/25 cm.

– Drive through water no faster thanwalking speed, up to 3 mph/5 km/h.

Safety information

NOTICE

When driving too quickly through toodeep water, water can enter into the en-gine compartment, the electrical system orthe transmission. There is a risk of damageto property. When driving through water,do not exceed the maximum indicated wa-ter level and the maximum speed for driv-ing through water.

Braking safely

General informationThe vehicle is equipped with an AntilockBraking System ABS as a standard feature.

Perform an emergency stop in situationsthat require such.

Steering is still responsive. You can stillavoid any obstacles with a minimum ofsteering effort.

Pulsation of the brake pedal and soundsfrom the hydraulic circuits indicate thatABS is in its active mode.

Objects in the area around the pedals

Warning

Objects in the driver's floor area can limitthe pedal distance or block a depressedpedal. There is a risk of accident. Stow ob-jects in the vehicle such that they are se-cured and cannot enter into the driver'sfloor area. Use floor mats that are suitablefor the vehicle and can be safely attachedto the floor. Do not use loose floor matsand do not layer several floor mats. Makesure that there is sufficient clearance forthe pedals. Ensure that the floor mats aresecurely fastened again after they were re-moved, for instance for cleaning.

Driving in wet conditionsWhen roads are wet, salted, or in heavyrain, gently press the brake pedal every fewmiles.

Ensure that this action does not endangerother traffic.

The heat generated during braking driesbrake discs and brake pads and protectsthem against corrosion.

In this way braking efficiency will be avail-able when you need it.

Seite 206



Hills

General information

Drive long or steep downhill gradients inthe gear that requires least braking effort.Otherwise, the brakes may overheat and re-duce brake efficiency.

You can increase the engine's braking effectby shifting down, going all the way to firstgear, if needed.

Safety information

Warning

Light but consistent brake pressure canlead to high temperatures, brakes wearingout and possibly even brake failure. Thereis a risk of accident. Avoid placing exces-sive stress on the brake system.

Warning

In idle state or with the engine switchedoff, safety functions, for instance enginebraking effect, braking assistance andsteering assistance, may not be available.There is a risk of accident. Do not attemptto drive in idle state or with the engineswitched off.

Brake disc corrosionCorrosion on the brake discs and contami-nation on the brake pads are increased bythe following circumstances:

– Low mileage.

– Extended periods when the vehicle isnot used at all.

– Infrequent use of the brakes.

– Aggressive, acidic, or alkaline cleaningagents.

Corrosion buildup on the brake discs willcause a pulsating effect on the brakes in

their response - generally this cannot becorrected.

Condensation water under theparked vehicleWhen using the automatic climate control,condensation water develops and collectsunderneath the vehicle.

Ground clearance

NOTICE

If the ground clearance is insufficient, e.g.,curbs or underground garage entrances,contact with vehicle parts, e.g., spoiler,and the underbody may occur. There is arisk of damage to property. Ensure thatthere is sufficient ground clearance availa-ble.

Rear luggage rack

General informationInstallation only possible with rear luggagerack preparation.

Rear luggage racks that are classified by themanufacturer of the vehicle to be suitableare available as special accessories.

Mounting

COOPER

Seite 207

Things to remember when driving DRIVING TIPS


COOPER S

The fixing points, arrows 1, and the socket,arrow 2, are located below the covers in thebumper.

Remove the covers before installing therear luggage rack.

LoadingBecause rear luggage racks raise the vehi-cle's center of gravity when loaded, theyhave a major effect on vehicle handling andsteering response.

Therefore, note the following when loadingand driving:

– Do not exceed the approved axle loadand the approved gross vehicle weight.

– Drive smoothly. Avoid sudden accelera-tion and braking maneuvers. Take cor-ners gently.

Power consumptionBefore starting to drive, check the functionof the rear luggage rack lights. Before start-ing to drive, check the function of thetrailer tail lights.

The rear luggage rack lights must not con-sume more than:

– Turn signals: 42 watts per side.

– Rear lights: 50 watts per side.

– Brake lights: 84 watts in total.

– Rear fog lights: 42 watts in total.

– Backup light: 42 watts in total.

Keep activation times of power consumersshort with the engine switched off to pro-tect the vehicle battery.

Driving on racetracks

Warning

The vehicle is not designed for use in MSport or motor sport type competition.There is a risk of accident. Do not use thevehicle for M Sport or motor sport typecompetitions.

Higher mechanical and thermal loads duringracetrack operation lead to increased wear.This wear is not covered by the warranty.

Seite 208



Reducing fuel consumption



General information

The vehicle contains advanced technologiesfor the reduction of consumption and emis-sion values.

Fuel consumption depends on a number ofdifferent factors.

The implementation of certain measures,driving style and regular maintenance caninfluence fuel consumption and environ-mental impact.

Remove unnecessary cargo

Additional weight increases fuel consump-tion.

Remove attached parts follow-ing use

Remove rear luggage racks which are nolonger required following use.

Attached parts on the vehicle impair theaerodynamics and increase the fuel con-sumption.

Close the windows

Open windows increase air resistance andtherefore lead to greater fuel consumption.

Tires

General informationTires can affect consumption in variousways, for instance tire size may influenceconsumption.

Check the tire inflation pressureregularlyCheck and, if needed, correct the tire infla-tion pressure at least twice a month and be-fore starting on a long trip.

Low tire inflation pressure increases rollingresistance and thus raises fuel consumptionand tire wear.

Drive away without delay

Do not wait for the engine to warm-upwhile the vehicle remains stationary. Startdriving right away, but at moderate enginespeeds.

This is the fastest way for the cold engineto reach its operating temperature.

Seite 209

Reducing fuel consumption DRIVING TIPS


Look well ahead when driving

Driving smoothly and proactively reducesfuel consumption.

Avoid unnecessary acceleration and brak-ing.

By maintaining a suitable distance to thevehicle driving ahead of you.

Avoid high engine speeds

Driving at low engine speeds lowers fuelconsumption and reduces wear.

If necessary, observe the vehicle's gear shiftindicator, refer to page 117.

Use coasting conditions

When approaching a red light, take yourfoot off the accelerator and let the vehiclecoast to a halt.

For going downhill take your foot off the ac-celerator and let the vehicle roll.

The flow of fuel is interrupted while coast-ing.

Switch off the engine duringlonger stops

Switching off the engineSwitch off the engine during longer stops,for instance at traffic lights, railroad cross-ings or in traffic congestion.

Auto Start/Stop functionThe Auto Start/Stop function of the vehicleautomatically switches off the engine dur-ing a stop.

If the engine is switched off and then re-started rather than leaving the engine run-ning constantly, fuel consumption and emis-sions are reduced. Savings can begin withina few seconds of switching off the engine.

In addition, fuel consumption is also deter-mined by other factors, such as drivingstyle, road conditions, maintenance or envi-ronmental factors.

Switch off any functions thatare not currently needed

Functions such as seat heating and the rearwindow defroster require a lot of energyand consume additional fuel, especially incity and stop-and-go traffic.

Switch off these functions if they are notneeded.

Have maintenance carried out

Have the vehicle maintained regularly toachieve optimal vehicle efficiency and serv-ice life. MINI recommends that mainte-nance work be performed by a MINI servicecenter.

Also note the MINI maintenance systems,refer to page 274.

GREEN Mode

ConceptGREEN Mode supports a driving style thatsaves on consumption. For this purpose, theengine control and comfort features, for in-stance the climate control output, are ad-justed.

For Steptronic transmission:

Seite 210

DRIVING TIPS Reducing fuel consumption


Under certain conditions the engine is auto-matically decoupled from the transmissionin the D selector lever position. The vehiclecontinues traveling with the engine idlingto reduce consumption. The D selector leverposition remains engaged.

In addition, context-sensitive instructionsare displayed to assist with an efficientdriving style.

The achieved extended range is displayed inthe instrument cluster as bonus range.

General informationThe system includes the following functionsand displays:

– GREEN Limit, refer to page 211

– GREEN climate control, refer topage 211.

– GREEN bonus range, refer to page 212.

– GREEN tip, driving instruction, refer topage 212.

– Coasting driving condition, refer topage 213.

Activating GREEN ModePress the MINI Driving Modesswitch downward untilGREEN is displayed in the in-strument cluster.

Configuring GREEN

Via MINI Driving Modes switch1. Activating GREEN Mode.



Via the Central Information Display(CID)1. "My MINI"





Activating/deactivating the functionsThe following functions can be activated/deactivated:

– "GREEN speed warning"

– "GREEN climate control"

– "Coasting"


GREEN Limit– "GREEN speed warning": GREEN Limit

is activated.

A GREEN tip is displayed if the speed ofthe set GREEN Limit is exceeded.

– "Tip at:"

Set the desired speed for the GREENLimit.

GREEN climate controlClimate control is set to be efficient.

By making a slight change to the set tem-perature and adjusting the rate of heatingor cooling of the car's interior consumptioncan be economized.

The power output to the seat heater and ex-terior mirror is reduced.

CoastingEfficiency can be optimized by disengagingthe engine and coasting, refer to page 213,with the engine idling.

Seite 211



This function is only available in GREENMode.

Deactivate the function to use the brakingeffect of the engine when traveling down-hill.

GREEN potential savingsShows potential savings with the currentsettings in percentages.

Display in the instrument cluster

GREEN bonus range

A modified driving style helpsyou extend your driving range.

The range extension can bedisplayed as the bonus rangein the instrument cluster.

The bonus range is shown in the range dis-play.

The bonus range is automatically reset ev-ery time the vehicle is refueled.

– Green display: efficient driving style.

– Gray display: modify driving style, forinstance by backing off the acceleratorpedal.

Efficiency display

A bar display in the instru-ment cluster indicates yourcurrent driving efficiency.

Mark in the left area, arrow 1:display for energy recovered

by coasting or when braking.

Mark in the right area, arrow 2: displaywhen accelerating.

The efficiency of your driving style isshown by the position of the mark:

– Mark inside the green range: efficientdriving style.

– Mark outside the green range: modifydriving style, for example by backing offthe accelerator.

GREEN tip, driving instruction

General information

The GREEN tip indicates that your drivingstyle can be modified to be more efficient,for example by backing off the accelerator.


Activating/deactivating the displayActivate information relating to the drivingstyle and GREEN tips in the instrumentcluster using the Central Information Dis-play (CID):

1. "My MINI"


3. "Displays"


5. "GREEN info"

GREEN tip, symbolsAn additional symbol and text instructionsare displayed.

Seite 212



Symbol Measure

For an efficient driving style,look well ahead when driving,accelerate conservatively, anddelay accelerating.

Reduce speed to the selectedGREEN speed.


Switch from M/S to D and avoidmanual shift interventions.


Follow the shift instructions.


Engage neutral for an enginestop.

Coasting

ConceptThe function helps to conserve fuel.

To do this, under certain conditions the en-gine is automatically decoupled from thetransmission when selector lever position Dis set. The vehicle continues traveling withthe engine idling to reduce consumption.Selector lever position D remains engaged.

This driving condition is referred to ascoasting.

As soon as you step on the brake or acceler-ator pedal, the engine is automatically cou-pled again.

General informationCoasting is a component of the GREEN driv-ing mode.

Coasting is automatically activated whenthe GREEN driving mode is called via theMINI Driving Modes switch, refer topage 155.

A proactive driving style helps the driver touse the function often and supports the effi-cient effect of coasting.

Functional requirementsThe function is available in the speed rangefrom approx. 15 mph/25 km/h up to100 mph/160 km/h.

– Accelerator pedal and brake pedal arenot operated.

– The selector lever is in selector lever po-sition D.

– Engine and transmission are at operat-ing temperature.

– With a camera in the area of the interiormirror: the system does not detect anyvehicles ahead of you.

Operation via shift paddles

Concept

Depending on your vehicle's equipment, thecoasting mode can be influenced with theshift paddles.

Activating/deactivating coasting via shiftpaddles

1. Shift to the highest gear by pulling theright shift paddle.

2. To activate coasting mode, actuate theright shift paddle again.

To deactivate, actuate the left shift paddle.

Seite 213



Display

Instrument cluster without enhancedfeatures

The bar display below the tachometer is fil-led in green and the mark appears at thezero point. The tachometer indicates idlespeed.

System limitsThe function is not available if one of thefollowing conditions applies:

– DSC OFF and TRACTION are activated.

– Cruise control is activated.

– If driving in the dynamic limit range.

– If driving on steep uphill or downhillgrades.

– The battery charge state is temporarilytoo low.

– The vehicle electrical system is drawingexcessive current.

Seite 214



Seite 215



General information



Control elements

1 Waveband/satellite radio

2 Change entertainment sources

3 Sound output on/off, volume

4 Changing the station/track

5 Programmable memory buttons

Sound output

Safety information

Warning

A high sound output volume can damageyour hearing. There is a risk of injury. Donot adjust the volume too high.

Volume and sound output– Turn the button to adjust the vol-

ume.

– Press the button to switch off thesound output. Pressing the but-ton again restores the previousvolume setting.

Audio recording playback is stopped duringmuting.

Entertainment sources

General informationPossible entertainment sources:

– Radio, refer to page 220.

– USB audio, refer to page 228.

– Bluetooth audio, refer to page 228.

Changing the entertainment sourceOn the radio:


A list of all currently available entertain-ment sources is displayed.

Seite 216

ENTERTAINMENT General information


2. Press the button again to selectan entertainment source.


1. "Media/Radio"

A list of all possible entertainment sour-ces is displayed.

2. Select the desired entertainment source.

Via the button on the Controller:


The most recently selected entertain-ment source is played.

2. Press the button again.

A list of all currently available entertain-ment sources is displayed.

3. Select the desired entertainment source.

Seite 217

General information ENTERTAINMENT


Tone



General information


Treble, bass, balance, andfader

1. "Media/Radio"

2. "Tone"


– "Treble": treble adjustment.

– "Bass": depth adjustment.

– "Balance": left/right volume distribu-tion.

– "Fader": front/rear volume distribu-tion.

4. To adjust: turn the Controller.

5. To store: press the Controller.

Volume equalization

ConceptAn automatic increase of the volume can beset to compensate for the increasing drivingnoises at higher speeds.

Set automatic volume increase1. "Media/Radio"

2. "Tone"



– "Speed volume": ratio of entertain-ment volume to speed.

– "PDC": ratio of the volume of the PDCsignal tone to the entertainment vol-ume.

The basic setting ensures that thesignal tone is audible at any volume.

– "Gong": ratio of the volume of thesignal tone, for instance for safetybelt reminder, to the entertainmentvolume.

The basic setting ensures that thesignal tone is audible at any volume.

– "Microphone": sensitivity of the mi-crophone during a phone call.

The setting is adjusted while callingand is stored for the mobile phoneused.

– "Speakers": volume of the loudspeak-ers during a phone call.

Audio recording playback is stoppedduring muting.

The setting is adjusted while callingand is stored for the mobile phoneused.

Seite 218

ENTERTAINMENT Tone


Reset the tone settings

The tone settings are reset to the factorysettings.

1. "Media/Radio"

2. "Tone"

3. "Reset"

Seite 219

Tone ENTERTAINMENT


Radio



General information


AM/FM station

General informationDepending on the vehicle equipment andcountry version, it may not be possible toreceive AM stations.

Radio Data System RDS

ConceptRDS broadcasts additional information,such as the station name, in the FM wave-band.

It is recommended to switch on RDS.

Switching on/off1. "Media/Radio"

2. "FM"


4. "RDS"

Selecting a station1. "Media/Radio"

2. "FM" or "AM"

The last station listened to will beplayed and the station list displayed.

3. Select the desired station.

Changing the stationOn the radio:

Press the left or right button.

The previous or next station from the list ofstations is played.

Storing a station

General informationA symbol on the highlighted channel indi-cates whether the channel has already beenstored.

Symbol Meaning

Station is not stored.

Station is already stored.

Storing the station being played1. "Media/Radio"

2. "FM" or "AM"


4. "Save station"

The storage list is displayed.

5. Select the desired memory location.

Seite 220

ENTERTAINMENT Radio


Storing a station that is not beingplayed1. "Media/Radio"

2. "FM" or "AM"

3. Highlight the desired station.

4. Press the Controller and hold until thestorage list is displayed.


The stations can also be stored on the pro-grammable memory buttons, refer topage 41.

Selecting a station manuallyStation selection via the frequency.

1. "Media/Radio"

2. "FM" or "AM"


4. "Manual search"

5. To select the frequency: turn the Con-troller.

6. To store the frequency: press the Con-troller.

Renaming a stationWhen storing a station with RDS signal, theRDS information transferred during storingis accepted as the station name. The stationname can be changed.

1. "Media/Radio"

2. "FM"



5. "Rename to:"

If necessary, wait until the name of thedesired station appears.

6. Press the Controller to store this name.

Additional station information

ConceptIf a radio station broadcasts radio text orradio text plus, this information can be dis-played, for instance the track or performerof the music. Availability, content and se-quence are set by the radio station.

Displaying additional stationinformation1. "Media/Radio"

2. "FM"



5. "Station info"

HD Radio™ reception

ConceptMany radio stations broadcast both analogand digital signals.

General informationWhen setting a station with a digital signal,it may take a few seconds before the stationplays in digital quality.

Information about HD Radio stations whosestation name ends with ...HD or with ...HD1:

In areas in which the station is not continu-ously received in digital mode, the playbackswitches between analog and digital recep-tion. In this case, switch off digital radio re-ception.

Information about HD Radio multicast sta-tions whose station name endswith ...HD2, ...HD3, ...:

In areas in which the station is not continu-ously received in digital mode, there may beinterruptions of the audible signal lasting

Seite 221

Radio ENTERTAINMENT


several seconds. The duration of the inter-ruption depends on the reception.

Activating/deactivating digital radioreception1. "Media/Radio"

2. "FM" or "AM"


4. "HD Radio reception"

This symbol is displayed in the statusline when the audio signal is digital.

Displaying additional informationSome stations broadcast additional informa-tion on the current track, such as the nameof the artist.

1. "Media/Radio"

2. "FM" or "AM"

3. Select a station.


5. "Station info"

License conditionsHD Radio Technology manu-factured under license from

iBiquity Digital Corporation. U. S. and For-eign Patents. HD Radio™ and the HD, HDRadio, and “Arc” logos are proprietarytrademarks of iBiquity Digital Corp.

Satellite radio

General informationBefore a channel can be played, you mustsubscribe to it via telephone. Several chan-nels can be combined into specified pack-ages.

Managing a subscription

General informationIn order to enable or unsubscribe fromchannels, you must have reception. It isusually at its best when you have an unob-structed view of the sky. The channel nameis displayed in the status line.

Enabling channels1. "Media/Radio"

2. "Satellite radio"


4. "Show subscription info"

The phone number and identificationnumber of the radio are displayed.

5. Call the phone number to have the chan-nel enabled.

You can unsubscribe from the channelsagain via this phone number.

Unsubscribing from channels1. "Media/Radio"



4. "Show subscription info"

The phone number and identificationnumber of the radio are displayed.

5. Call the phone number to cancel yoursubscription to the channel.

Selecting channelsYou can only listen to enabled channels.

1. "Media/Radio"


The last channel played will be playedback and the channel list displayed.

Seite 222

ENTERTAINMENT Radio


3. Select the desired channel from thechannel list.

To display information about the selectedchannel:

1. Highlight a channel.


3. "Channel information"

Adjusting display of the channellistThe display of the playback list can be ad-justed.

1. "Media/Radio"



4. "Change view"

5. Select the desired display:

– "Channel"

The name of the channel will be dis-played.

– "Artist"

The name of the artist playing willbe displayed.

– "Titles"

The name of the track playing will bedisplayed.

Changing the channelPress the button on the radio.

The next and/or previous channel from thechannel list is played.

Storing a channel1. "Media/Radio"


A symbol on the highlighted channel indi-cates whether the channel has already beenstored.

Symbol Meaning

Channel is not stored.

Channel is already stored.

To store the channel played:


2. "Save station"



Or:

1. Highlight the played channel.




To store a channel other than the oneplayed:

1. Highlight the desired channel.

2. Press the Controller and hold until thestorage list is displayed.


Or:

1. Highlight the desired channel.


3. "Save in presets"



The stations can also be stored on the pro-grammable memory buttons.

Selecting a category1. "Media/Radio"


Seite 223

Radio ENTERTAINMENT



4. "Category"

5. Select the desired category.

The subscribed channels from this cate-gory are displayed.

6. Select the desired channel.

Timeshift

General informationThe channel you are currently listening to isstored in a buffer for up to an hour.

Prerequisite: the signal must be available.

The stored audio track can be played with adelay following the live broadcast. Whenthe memory is full, the older tracks are over-written. The memory is cleared when a newchannel is selected or when the vehicle isswitched off.

Opening the timeshift function1. "Media/Radio"



4. "Time shift"

Time shift forward/reverseWithin the stored recording, it is possibleto jump to any point in time.

Press the button on the radio orturn the Controller.

You can jump to the next or the previoustrack.

Press and hold the button on theradio.

The recording is spooled forward or back.

Timeshift menu

Symbol Function

Go to the live broadcast.

Automatic timeshift deacti-vated/activated.

/ Playback/pause.

Automatic timeshiftWith automatic timeshift, audio playback ispaused for the following events.

– Incoming and outgoing telephone calls.

– Activation of the voice activation sys-tem.

– Muting.

After that, audio playback is continued fromthe time of the interruption.


2. To activate:

"Automatic time shift"

Deactivate:

"Automatic time shift".

Smart Favorites

General informationA maximum of 6 channels can be stored asSmart Favorites.

If a stored channel is selected, the currenttrack will be played from the beginning.

Adding the current channel to SmartFavorites


2. "Add to Smart Favorites"

Seite 224

ENTERTAINMENT Radio


Removing the current channel fromSmart Favorites


2. "Remove from Smart Favorites"

Selecting Smart Favorite1. "Media/Radio"



4. "Category"

5. Select a Smart Favorite.

The subscribed channels from this cate-gory are displayed.

6. Select the desired channel.

Favorites

General informationA performer, a track, a league or a team canbe stored as a favorite. If the stored favoriteis played on a channel, a message appearson the Control Display. Up to 30 Favoritescan be stored.

Storing the artist or trackIt is only possible to store Favorites that arecurrently being broadcast. The channel in-formation must be available.

1. "Media/Radio"



4. "Add to favorites"

5. Highlight the performer or track, andpress the Controller.

A symbol indicates whether the artist andtrack were already stored.

Symbol Meaning

Artist/track is not stored.

Artist/track was already stored.

Storing the league or team1. "Media/Radio"



4. "Add to favorites"

5. "Add sports information"

6. Select the type of sport desired.

7. Select the desired team.

Activating/deactivating a notificationA notification can be displayed when a se-lected favorite is being played.

1. "Media/Radio"



4. "Manage favorites"

The stored Favorites are displayed.

5. "Activate alert"

Set a check mark to activate notificationfor the selected Favorites.

Remove the check mark to deactivatenotification for the selected Favorites.

6. Select the desired Favorites.

Opening the FavoritesIf an activated favorite is played back, thefollowing message is displayed for approx.20 seconds: "Favorite on air!".

To change to the played Favorites:

Tap on the message on the Control Display.

Or:


Seite 225

Radio ENTERTAINMENT


2. "Favorite alert"

Select the symbol while the message isshown.

The displayed favorite is played.

When the message disappears, the list ofchannels that is currently playing one of thestored Favorites can be displayed.


2. "Category"

3. Select the Favorites list.

The channels that are currently playinga favorite are displayed.

4. Select the channel that you would like tochange to.

Deleting Favorites1. "Media/Radio"



4. "Manage favorites"

The stored Favorites are displayed.

5. Highlight the desired favorites.


7. "Delete entry"

Traffic Jump

General informationTraffic and weather information for a se-lected region is broadcast every few mi-nutes.

Selecting a region1. "Media/Radio"



4. "Configure jump"

5. Select the desired region.

Activating/deactivating Traffic JumpYou must have reception in order to acti-vate or deactivate.

1. "Media/Radio"



4. "Configure jump"

5. "Jump to:"

Place a check mark to activate TrafficJump.

Information for the selected region isbroadcast as soon as it is available.

Remove the check mark to deactivateTraffic Jump.

Channel magazineIn the channel magazine, the current andsubsequent program for each channelbooked is displayed.

1. "Media/Radio"



4. "SiriusXM program guide"

Automatic updateAbout twice a year, Sirius performs an up-date of the channel names and positions.The update takes place automatically andmay take several minutes.

System limits– Reception may not be available in some

situations, such as under certain envi-ronmental or topographical conditions.The satellite radio has no influence onthis.

Seite 226

ENTERTAINMENT Radio


– Graphical contents can be received un-der certain circumstances.

– The signal may not be available in tun-nels or underground garages next to tallbuildings or near trees, mountains orother powerful sources of radio interfer-ence.

Stored stations

General informationUp to 40 stations can be stored.

Selecting a station1. "Media/Radio"

2. "Presets"


Deleting a station1. "Media/Radio"

2. "Presets"

3. Highlight the station you want to delete.


5. "Delete entry"

Seite 227

Radio ENTERTAINMENT


Audio



General information

Music tracks, audio books, and podcasts canbe played back. Sound is played backthrough the vehicle loudspeakers.


Depending on the vehicle equipment, thefollowing audio sources can be used:

Symbol Meaning

USB storage device.

Bluetooth audio.

USB storage device

Playable formatsPopular audio formats such as MP3, AAC orWMA can be played.

Apple iPod/iPhoneThe music search and playback of AppleiPod/iPhone are supported.

Audio player and storage mediawith USB portInformation on all music tracks, for instanceartist, genre or track, as well as playbacklists, are transmitted into the vehicle. Thismay take some time, depending on the USBstorage device, file size, and number oftracks.

During the transfer, the tracks can be calledup via the file directory.

The information for approx. 10,000 trackscan be stored in the vehicle.

Music tracks with integrated Digital RightsManagement DRM cannot be played.

Selecting the USB storage deviceInformation on the USB port, refer topage 194.

1. Connecting USB storage devices to theUSB port.

The adapter cable supplied with the USBstorage device would be ideal.

2. "Media/Radio"

3. "USB"

Or:

Select the name of the USB storage de-vice.

Further playback descriptions, refer topage 229.

Bluetooth audio

General information– Playback of music files on external devi-

ces such as audio devices or mobilephones via Bluetooth.

Seite 228

ENTERTAINMENT Audio


– The volume of the sound output dependson the device. If necessary, adjust thevolume on the device.

– Up to four external devices can be con-nected to the vehicle.

Functional requirements– Bluetooth device is connected to the ve-

hicle.

– Bluetooth audio playback was activated.

Selecting the Bluetooth device1. "Media/Radio"

2. Select the desired Bluetooth device fromthe list.

Further playback descriptions, refer topage 229.

If the Bluetooth device is not listed in thedevice list, Bluetooth audio playback mayhave not been activated. To activate Blue-tooth audio playback, proceed as follows:

1. "Media/Radio"

2. "Manage mobile devices"

3. Select the desired Bluetooth device.

4. "Bluetooth® audio"

Playback

General informationOnce an audio source has been selected, in-formation on playback appears on the Con-trol Display.

Information available for the current trackfollowed by the playback list is shown onthe Control Display. Content and scope ofthe playback list depend on the type of theselected playback source and the search cri-teria applied.

For USB and Bluetooth devices, the selectedplayback list is displayed. This can be theresult of a search or of a previously storedplayback list.

Further functions are displayed by movingthe Controller to the left. The scope of thesefunctions depends on the selected audiosource.

Depending on the supported Bluetooth ver-sion, some Bluetooth device functions maynot be available when using the Central In-formation Display (CID). If necessary, themissing functions can be accessed directlyon the device itself.

Selecting a trackSelect the desired track from the playlist.

Starting with the selected track, all tracks ofthe playback list are played.

Changing the trackOn the radio:

Press the left or right button.

The previous or next track from the playlistis played.

Fast forward/reverseOn the radio:

Press and hold the left or right but-ton.

Search criteria

General informationThe possible search criteria depend on theselected audio source.

Seite 229

Audio ENTERTAINMENT


Searching for track informationThe following search criteria refer to thedata stored in the track information.


2. "Media search"


– "Search"

All the tracks containing the searchstring are displayed. Entering morecharacters will continue to narrowdown the search results.

Tilt the Controller to the right to dis-play the list of results.

– "Genres"

A list of all available genres is dis-played.

Select a genre to display all respec-tive artists.

– "Artists"

A list of all available artists is dis-played.

Select an artist to display all respec-tive albums and tracks.

– "Albums"

A list of all available albums is dis-played.

Select an album to display all respec-tive tracks.

– "Titles"

A list of all available tracks is dis-played.

4. Select album, if needed.

5. Select the track at which the playback isgoing to begin.

The search for artists and titles can also beselected directly.


2. "Artists" or "Titles"

Tracks where the selected search criterionis not stored are summarized under "un-known". Tracks without track informationcan only be found via the directory struc-ture.

Search playlists1. Move the Controller to the left.

2. "Media search"

3. "Playlists"

A list of all available playback lists isdisplayed.

4. Select the playback list.


Information on playback appears on theControl Display. A playback list is cre-ated from the search results.

Search audio books and podcastsDepending on the USB storage device andequipment, separate audio book and podcastsearches are possible.


2. "Media search"


– "Podcasts"

A list of all available podcasts is dis-played.

– "Audio books"

A list of all available audio books isdisplayed.



Seite 230

ENTERTAINMENT Audio


Search directory structureIt is possible to search the USB storage de-vices via the directory structure.

The names of folders and tracks correspondto folder and file names. The folder and filenames can deviate from the names in thetrack information.


2. "Media search"

3. "Browse folder"

4. Change into a sub folder, if needed.

Select the track at which the playback isgoing to begin.


Random playback

ConceptThe current playlist or all tracks of the se-lected audio source are played back in ran-dom order.

Select random1. Move the Controller to the left.

2. "Shuffle"

Seite 231

Audio ENTERTAINMENT


Telephone



Telephone functions

General informationMobile phones can be connected to the ve-hicle via Bluetooth. Pair and connect themobile phone with the vehicle, refer topage 46.

At high temperatures, the charge functionof the mobile phone can be limited whereappropriate and functions are no longer exe-cuted.

Do not operate a mobile phone that is con-nected to the vehicle on the mobile phonekeypad, as this may lead to a malfunction.

When the mobile phone is used via the ve-hicle, refer to the owner's manual of the mo-bile phone.

Safety information

Warning

Operating the integrated information sys-tems and communication devices whiledriving can distract from traffic. It is pos-sible to lose control of the vehicle. There is

a risk of accident. Only use the systems ordevices when the traffic situation allows.As warranted, stop and use the systemsand devices while the vehicle is stationary.

Incoming callIf the number of the caller is stored in thephone book and is transmitted by the net-work, the name of the contact is displayed.Otherwise, only the phone number is dis-played.

Accepting a callIncoming calls can be answered in severalways.

– Via Central Information Display (CID):

"Accept"

– /

Press the corresponding button on thesteering wheel.

Rejecting a call"Reject"

Ending a call– Via Central Information Display (CID):

"End call"

– /

Press the corresponding button on thesteering wheel.

Last callsThe last outgoing, missed, and incomingcalls are transferred to the vehicle.

Seite 232

COMMUNICATION Telephone


Displays1. "Communication"

2. "Recent calls"

3. The 20 last calls are displayed.

Filtering call list1. "Calls:"


Selecting number from listSelect from list. Call is established via themobile phone.

To cancel: "End call"

Active calls

Adjusting the volumeTurn the volume button on the radio duringthe call, until the desired volume is reached.The setting is stored for the driver profilecurrently used.

Automatic volume equalization1. "My MINI"


3. "Tone"


5. "Microphone" or "Speakers"

6. To adjust: turn the Controller.

7. To store: press the Controller.

Dialing a number1. "Communication"

2. "Dial number"

3. Enter the numbers.


Holding, resumingAn active call can be put on hold and re-sumed later on.

– "Hold/Resume"

Call is put on hold.

– "Hold/Resume"

Call is resumed.

Muting the microphoneWhen a call is active, the microphone canbe muted.

"Microphone"

The muted microphone is automatically ac-tivated:

– When a new connection is established.

– When switching between call parties.

DTMF suffix dialingDTMF suffix dialing can be used for gainingaccess to network services or for control-ling devices, for instance to make a remoteinquiry of an answering machine. TheDTMF code is needed for this purpose.

1. "Keypad dialing"

2. Enter DTMF code.

Calls with multiple parties

General informationYou can switch between calls or connecttwo calls to a single conference call. Thesefunctions must be supported by the mobilephone and service provider.

Accepting a call while speaking toanother partyIf a second call comes in during an ongoingcall, a call waiting signal sounds where ap-propriate.

"Accept"

Seite 233

Telephone COMMUNICATION


The call is accepted and the existing call isput on hold.

Establishing a second callAn additional call can be established while acall is active.

1. "Contacts"

2. Select new number.

The call is started and the first call is puton hold.

Switching between two calls, hold callYou can switch between two calls.

1. Establish two calls.

2. "Resume"

The call on hold is resumed.

Establishing a conference callTwo calls can be connected to a single tele-phone conference call. The calls must bemade from the same mobile phone.

1. Establish two calls.

2. "Conference call"

Hands-free system

General informationCalls that are being made on the hands-freesystem can be continued on the mobilephone and vice versa.

From the mobile phone to the hands-free systemCalls that were begun outside of the Blue-tooth range of the vehicle can be continuedon the hands-free system with standby stateor the ignition switched on. The vehicle keymust be located in the vehicle for this towork.

Depending on the mobile phone, the systemautomatically switches to the hands-freesystem.

If the system does not switch over automat-ically, follow the instructions on the displayof the mobile phone. Refer also to the own-er's manual of the mobile phone.

From the hands-free system to themobile phoneCalls that are made on the hands-free sys-tem can in some cases be continued on themobile phone; this depends on the mobilephone.

Follow the instructions on the display of themobile phone. Refer also to the owner'smanual of the mobile phone.

Contacts

General informationContacts from the mobile phone are trans-ferred and displayed. Contact pictures canbe displayed, if the mobile phone supportsthis function.

Displaying all contacts1. "Communication"

2. "Contacts"

The contacts are listed in alphabeticalorder. Depending on the number of con-tacts, contact search and quick searchare offered.

Contact searchContact search is available with more than30 contacts.

1. "Search"

2. Enter the letters.

The hits are displayed on the right side.

Seite 234

COMMUNICATION Telephone


3. Move the Controller to the right.

4. Select the contact to display it.

Quick search in listsQuick search is available starting from30 contacts. All letters, for which there areentries, are displayed in alphabetical orderon the left of the Control Display.

1. Turn the Controller to the left or rightquickly.

All letters, for which contacts are stored,are displayed on the left.

2. Select the first letter of the desired con-tact.

The first entry of the selected letter isdisplayed.

Sorting contactsContact names can be displayed in a differ-ent order. Depending on how the contactswere stored on the mobile phone, the sort-ing order of the contacts may differ fromthe selected sorting order.


2. "Sort contacts"

3. "Last name" or "First name"

Voice command responseA connected smartphone can be used viavoice operation.

Activate voice command response on thesmartphone for this purpose.

Button onthe steeringwheel

Function

Press the button for atleast 3 seconds. Voicecommand response is acti-vated on the smartphone.

The symbol indicates that the voicecommand response is active.

Seite 235

Telephone COMMUNICATION


MINI Connected



Safety information

Warning


Teleservices

ConceptTeleservices are services that help to main-tain vehicle mobility.

General informationThe offering depends on the equipment ver-sion of the vehicle and the country-specificvariant.

For further information on the availableservices, the vehicle manufacturer recom-mends contacting a service center or cus-tomer support.

Teleservices can comprise the followingservices:

– Service Request, refer to page 236.

– Teleservice Report, refer to page 237.

– Teleservice Battery Guard, refer topage 237.

– Your dealer’s service center, refer topage 237.

– Roadside Assistance, refer to page 285.

Requirements– Active MINI Connected contract or

equipment version with intelligentemergency call.

– Cellular network reception.

– Ignition or standby state is switched on.

Service Request

Automatic Service RequestThe Teleservice data on the vehicle's serv-ice notifications is sent automatically to theservice center by MINI prior to the servicedeadline. If feasible, the service center willcontact the customer about arranging aservice appointment.

This way, the dealer’s service center canplan the necessary work in advance. Thisshortens the duration of the service ap-pointment.

Seite 236

COMMUNICATION MINI Connected


Manual Service Request

Concept

Using a manually initiated Service Request,data on the vehicle's service notifications isdirectly sent by MINI to the service center.If feasible, the service center will contactthe customer about arranging a service ap-pointment.

General information

A Service Request can be started via aCheck Control message, refer to page 110.

Carry out service registration via the CheckControl message: "Service request".

Starting a Service Request

1. "MINI Connected"

2. "MINI Assist"


Last Service Request

Concept

The last Service Request, for instance thelast report to the dealer’s service center, canbe displayed on the Control Display.

Displaying the last Service Request

Check to see when the last Service Requestwas transmitted.

1. "My MINI"

2. "Vehicle status"



Teleservice Report

ConceptTransmits technical data that is evaluatedfor the ongoing development of MINI prod-

ucts from the vehicle to MINI in regular in-tervals, if needed.

General informationThe Teleservice Report is free of charge andis activated in vehicles that meet the follow-ing requirements:

– Certain technical requirements are met.

– Active MINI Connected contract.

– Equipped with intelligent emergencycall.

Neither personal data nor position data istransmitted.

Teleservice Battery Guard

ConceptIf the battery charge state falls below cer-tain values, MINI will inform you or yourdealer’s service center directly as warrantedor the next time the vehicle is started.

General informationIf necessary and possible, the dealer's serv-ice center will contact you to arrange aservice appointment.

The Battery Guard Teleservice is availableon a country-specific basis and under thefollowing conditions:

– Certain technical requirements are met.

– Active MINI Connected contract.

– To receive information from the BatteryGuard Teleservice, your contact datamust be stored in the MINI Connectedcustomer portal.

Your dealer’s service center

ConceptThe preset service center is displayed. It ispossible to contact the service center.

Seite 237

MINI Connected COMMUNICATION


General informationTo use Service Partner management in thevehicle, log in with the MINI Connected ac-cess data in the MINI Connected customerportal. In addition, your vehicle must be as-signed to your account in the MINI Con-nected customer portal.

Displaying service centersThe service center that is currently as-signed to the vehicle is displayed as a con-tact in the vehicle.

1. "MINI Connected" or "Communication"

2. "MINI Assist"

3. "Your service center" or select servicepartner management if necessary.

The assigned service center is displayedalong with all its contact information.

Depending on the vehicle equipment, thefollowing functions are available in a con-tact:

– Call contact.

Updating MINI Assist

ConceptStarts the manual update of all servicesavailable in the vehicle.

Updating services1. "MINI Connected"


3. "Update MINI Services"

Customer support

ConceptContact customer support for informationon all aspects of your vehicle.

Calling customer support1. "MINI Connected"

2. "MINI Assist"

3. "Customer support"

The customer support is displayed and avoice connection is established. If avoice connection is not established, dialthe number manually.

Seite 238

COMMUNICATION MINI Connected


Seite 239

MINI Connected COMMUNICATION


Refueling



General information

Follow the fuel recommendation, refer topage 242, prior to refueling.

Safety information

NOTICE

With a driving range of less than30 miles/50 km the engine may no longerhave sufficient fuel. Engine functions arenot ensured anymore. There is a risk ofdamage to property. Refuel promptly.

Fuel cap

Opening1. Grasp the fuel filler flap at the rear edge

and open it.

2. Turn the fuel cap counterclockwise.

3. Place the fuel cap in the bracket at-tached to the fuel filler flap.

Seite 240

MOBILITY Refueling


Closing

Warning

The retaining strap of the fuel cap can bejammed and crushed during closing. Thecap cannot be correctly closed. Fuel or fuelvapors can escape. There is a risk of injuryor risk of damage to property. Pay atten-tion that the retaining strap is not jammedor crushed when closing the cap.

1. Fit the cap and turn it clockwise untilyou clearly hear a click.

2. Press on the fuel filler flap until it en-gages.

Emergency unlockingIt may be necessary in certain situations tounlock the fuel filler flap manually, for in-stance with an electrical fault.

Have fuel filler flap unlocked by a dealer’sservice center or another qualified servicecenter or repair shop.

Follow the following when re-fueling

General informationWhen refueling, insert the filler nozzlecompletely into the filler pipe. Lifting up thefuel pump nozzle during refueling causes:

– Premature switching off.

– Reduced return of the fuel vapors.

The fuel tank is full when the filler nozzleclicks off the first time.

Make sure that the fuel cap is closed prop-erly after refueling, otherwise the emissionswarning light may light up.

Follow safety regulations posted at the gasstation.

Safety information

NOTICE

Fuels are toxic and aggressive. Overfillingof the fuel tank can damage the fuel sys-tem. Painted surfaces may be damaged bycontact with fuel. Escaping fuel can harmthe environment. There is a risk of damageto property. Avoid overfilling.

Seite 241

Refueling MOBILITY


Fuel



Fuel recommendation

General informationDepending on the region, many gas stationssell fuel that has been customized to winteror summer conditions. Fuel that is availablein winter, for instance helps make a coldstart easier.

Gasoline

General informationFor the best fuel efficiency, the gasolineshould be sulfur-free or very low in sulfurcontent.

Fuels that are marked on the gas pump ascontaining metal must not be used.

Fuels with a maximum ethanol content of25 %, i. e. E10 or E25, may be used for refu-eling.

Ethanol should meet the following qualitystandards:

US: ASTM 4806–xx

CAN: CGSB-3.511–xx

xx: comply with the current standard ineach case.

Safety information

NOTICE

Even small quantities of the wrong fuel orwrong fuel additives can damage the fuelsystem and engine. Furthermore, the cata-lytic converter is permanently damaged.There is a risk of damage to property. Donot refuel or add the following in the caseof gasoline engines:

– Leaded gasoline.

– Metallic additives, for instance man-ganese or iron.

Do not press the Start/Stop button afterrefueling with the wrong fuel. Contact adealer’s service center or another qualifiedservice center or repair shop.

NOTICE

Incorrect fuels can damage the fuel systemand the engine. There is a risk of damageto property. Do not use fuels with a higherpercentage of ethanol than recommended.Do not refuel with fuels containing metha-nol, e.g. M5 to M100.

NOTICE

Fuel that does not comply with the mini-mum quality can compromise engine func-tion or cause engine damage. There is arisk of damage to property. Do not fill withfuel that does not comply with the mini-mum quality.

Seite 242

MOBILITY Fuel


CAUTION

The use of poor-quality fuels may result inharmful engine deposits or damage. Addi-tionally, problems relating to drivability,starting and stalling, especially under cer-tain environmental conditions such ashigh ambient temperature and high alti-tude, may occur.

If drivability problems are encountered,we recommend switching to a high qualitygasoline brand and a higher octane grade— AKI number — for a few tank fills. Toavoid harmful engine deposits, it is highlyrecommended to purchase gasoline fromTop Tier retailers.

Failure to comply with these recommenda-tions may result in the need for unsched-uled maintenance.

Recommended fuel gradeMINI recommends AKI 91.

John Cooper Works:

MINI recommends AKI 93.

Refuel with this gasoline to achieve therated performance and consumption values.

Minimum fuel gradeMINI recommends AKI 89.

John Cooper Works:

MINI recommends AKI 91.

If you use gasoline with this minimum AKIRating, the engine may produce knockingsounds when starting at high external tem-peratures. This has no effect on the enginelife.

Seite 243

Fuel MOBILITY


Wheels and tires



Tire inflation pressure

General informationThe tire characteristics and tire inflationpressure influence the following:

– The service life of the tires.

– Road safety.

– Driving comfort.

– Fuel consumption.

Safety information

Warning

A tire with too little or no tire inflationpressure may heat up significantly andsustain damage. This will have a negativeimpact on aspects of handling, such assteering and braking response. There is arisk of accident. Regularly check the tireinflation pressure, and correct it asneeded, for instance twice a month and be-fore a long trip.

Tire inflation pressurespecifications

In the tire inflation pressure tableThe tire inflation pressure table, refer topage 246, contains all tire inflation pres-sure specifications for the specified tiresizes at the ambient temperature. The tireinflation pressure values apply to tire sizesapproved by the manufacturer of the vehiclefor the vehicle type.

To identify the correct tire inflation pres-sure, please note the following:

– Tire sizes of your vehicle.

– Maximum permitted driving speed.

Checking the tire inflation pressure

General informationTires heat up while driving. The tire infla-tion pressure increases with the tire tem-perature.

Tires have a natural, consistent loss of tireinflation pressure.

The displays of inflation devices may under-read by up to 0.1 bar/2 psi.

Checking using tire inflation pressurespecifications in the tire inflationpressure tableThe tire inflation pressure specifications inthe tire inflation pressure table only relateto cold tires or tires at the same tempera-ture as the ambient temperature.

Only check the tire inflation pressure levelswhen the tires are cold, i.e.:

– Driving range of max. 1.25 miles/2 kmhas not been exceeded.

Seite 244

MOBILITY Wheels and tires


– If the vehicle has not moved again for atleast 2 hours after a trip.

1. Determine the intended tire inflationpressure levels for the mounted tires.

2. Check the tire inflation pressure in allfour tires, using a pressure gage, for ex-ample.

3. Correct the tire inflation pressure if theactual tire inflation pressure deviatesfrom the intended tire inflation pres-sure.

4. Check whether all valve caps arescrewed onto the tire valves.

After correcting the tire inflationpressureFor run-flat tires: reinitialize run-flat tires.

For the Tire Pressure Monitor TPM: resetthe Tire Pressure Monitor TPM.

Checking the tire inflation pressure ofthe emergency wheelAlso check the tire inflation pressure of theemergency wheel in the cargo area regu-larly, and correct it as needed.

Tire pressures up to 100 mph/160 km/hFor speeds of up to 100 mph/160 km/h andfor optimum driving comfort, note the pres-sure values in the tire inflation pressure ta-ble, refer to page 246, and adjust as neces-sary.

These pressure values can also be found onthe tire inflation pressure label on the driv-er's door pillar.

Do not exceed a speed of 100 mph/160 km/h.

Seite 245

Wheels and tires MOBILITY


Tire pressure values up to100 mph/160 km/h

COOPER

Tire size Pressure specifica-tions in bar/PSI

Specifications inbar/PSI with coldtires

175/65 R 15 84H A/S

195/55 R 16 87V A/S

205/45 R 17 88V XL A/S

195/55 R 16 87W

205/45 R 17 88W XL

175/65 R 15 88H XL M+S

195/55 R 16 87H M+S

205/45 R 17 88V XL M+S

2.5 / 36 2.3 / 33

205/40 R 18 86W XL

175/60 R 16 86H XL M+S

185/50 R 17 86H XL M+S

2.7 / 39 2.5 / 36

COOPER S


Specificationsin bar/PSI withcold tires

195/55 R 16 87V A/S

195/55 R 16 87H M+S

2.5 / 36 2.3 / 33

205/45 R 17 88V XL A/S

205/45 R 17 88W XL

205/45 R 17 88V XL M+S

2.6 / 38 2.4 / 35

205/40 R 18 86W XL

175/60 R 16 86H XL M+S

185/50 R 17 86H XL M+S

2.8 / 41 2.6 / 38

Seite 246



JOHN COOPER WORKS

Tire size Pressure specificationsin bar/PSI


205/45 R 17 88V XL A/S

205/45 R 17 88W XL

205/40 R 18 86W XL

185/50 R 17 86H XL M+S

205/45 R 17 88V XL M+S

2.8 / 41 2.5 / 36

Tire inflation pressures at max.speeds above 100 mph/160 km/h

Warning

In order to drive at maximum speeds in ex-cess of 100 mph/160 km/h, please ob-serve, and, if necessary, adjust tire pres-sures for speeds exceeding 100 mph/160 km/h from the relevant table on thefollowing pages. Otherwise, tire damageand accidents could occur.

For speeds over 100 mph/160 km/h and foroptimum driving comfort, note the pressurevalues in the tire inflation pressure table,refer to page 247, and adjust as necessary.

Tire inflation pressure values over100 mph/160 km/h

COOPER


Specifications inbar/PSI with coldtires

175/65 R 15 84H A/S

195/55 R 16 87V A/S

205/45 R 17 88V XL A/S

195/55 R 16 87W

205/45 R 17 88W XL

175/65 R 15 88H XL M+S

195/55 R 16 87H M+S

205/45 R 17 88V XL M+S

2.8 / 41 2.6 / 38

205/40 R 18 86W XL

175/60 R 16 86H XL M+S

185/50 R 17 86H XL M+S

3.0 / 44 2.7 / 39

Seite 247



COOPER S


Specifications inbar/PSI withcold tires

195/55 R 16 87V A/S

195/55 R 16 87H M+S

2.9 / 42 2.6 / 38

205/45 R 17 88V XL A/S

205/45 R 17 88W XL

205/45 R 17 88V XL M+S

205/40 R 18 86W XL

175/60 R 16 86H XL M+S

185/50 R 17 86H XL M+S

3.2 / 46 2.9 / 42

On 3-door models: JOHN COOPERWORKS

Tire size Pressure specificationsin bar/PSI


205/45 R 17 88V XL A/S

205/45 R 17 88W XL

205/40 R 18 86W XL

185/50 R 17 86H XL M+S

205/45 R 17 88V XL M+S

3.4 / 49 3.0 / 44

Tire identification marks

Tire size205/45 R 17 84 V

205: nominal width in mm

45: aspect ratio in %

R: radial tire code

17: rim diameter in inches

84: load rating, not for ZR tires

V: speed rating, before the R on ZR tires

Maximum tire loadMaximum tire load is the maximum permis-sible weight for which the tire is approved.

Locate the maximum tire load on the tiresidewall and the Gross Axle Weight Rating– GAWR – on the certification label on thedriver’s door pillar. Divide the tire load by1.1. It must be greater than one-half of the

Seite 248



vehicle’s Gross Axle Weight Rating –GAWR. Note, front vs. rear GAWR and tireloads, respectively.

Speed letter

Designation Maximum speed

Q up to 100 mph/160 km/h

R: up to 106 mph/170 km/h

S up to 112 mph/180 km/h

T up to 118 mph/190 km/h

H up to 131 mph/210 km/h

V up to 150 mph/240 km/h

W up to 167 mph/270 km/h

Y up to 186 mph/300 km/h

Tire Identification NumberDOT-Code: DOT xxxx xxx 0120

xxxx: manufacturer code for the tire brand

xxx: tire size and tire design

0120: tire age

Tires with DOT codes meet the guidelinesof the U.S. Department of Transportation.

Tire age

RecommendationRegardless of the tire tread, replace tires atleast every 6 years.

Manufacture dateYou can find the manufacture date of thetire on the tire's sidewall.

Designation Manufacture date

DOT … 0120 1st week 2020

Uniform Tire Quality GradingQuality grades can be found where applica-ble on the tire sidewall between treadshoulder and maximum section width.

E.g.: Treadwear 200; Traction AA; Tempera-ture A

DOT Quality GradesTreadwear

Traction AA A B C

Temperature A B C

All passenger vehicle tires must conform toFederal Safety Requirements in addition tothese grades.

TreadwearThe treadwear grade is a comparative ratingbased on the wear rate of the tire whentested under controlled conditions on aspecified government test course. E.g., atire graded 150 would wear one and one-half, 1 g, times as well on the governmentcourse as a tire graded 100. The relativeperformance of tires depends upon the ac-tual conditions of their use, however, andmay depart significantly from the norm dueto variations in driving habits, service prac-tices and differences in road characteristicsand climate.

TractionThe traction grades, from highest to lowest,are AA, A, B, and C.

Those grades represent the tire's ability tostop on wet pavement as measured undercontrolled conditions on specified govern-ment test surfaces of asphalt and concrete.A tire marked C may have poor traction per-formance.

The traction grade assigned to this tire isbased on straight-ahead braking tractiontests, and does not include acceleration,

Seite 249



cornering, hydroplaning, or peak tractioncharacteristics.

TemperatureThe temperature grades are A, the highest,B, and C, representing the tire's resistanceto the generation of heat and its ability todissipate heat when tested under controlledconditions on a specified indoor laboratorytest wheel. Sustained high temperature cancause the material of the tire to degenerateand reduce tire life, and excessive tempera-ture can lead to sudden tire failure. Thegrade C corresponds to a level of perform-ance which all passenger car tires mustmeet under the Federal Motor VehicleSafety Standard No. 109. Grades Band Arepresent higher levels of performance onthe laboratory test wheel than the minimumrequired by law.

Warning

The temperature grade for this tire is es-tablished for a tire that is properly inflatedand not overloaded. Excessive speed, un-derinflation, or excessive loading, eitherseparately or in combination, can causeheat buildup and possible tire failure.

RSC – Run-flat tiresRun-flat tires, refer to page 253, are labeledwith a circular symbol containing the let-ters RSC marked on the sidewall.

M+SWinter and all-season tires with better coldweather performance than summer tires.

Tire tread

Summer tiresDo not drive with a tire tread of less than0.12 in/3 mm, otherwise there is an in-creased risk of hydroplaning.

Winter tiresDo not drive with a tire tread of less than0.16 in/4 mm, as such tires are less suitablefor winter operation.

Minimum tread depth

Wear indicators are distributed around thetire's circumference and have the legally re-quired minimum height of 0.063 in-ches/1.6 mm.

The positions of the wear indicators aremarked on the tire sidewall with TWI, TreadWear Indicator.

Tire damage

General informationInspect your tires regularly for damage, for-eign objects lodged in the tread, and treadwear.

Driving over rough or damaged road surfa-ces, as well as debris, curbs and other obsta-cles can cause serious damage to wheels,tires and suspension parts. This is more

Seite 250



likely to occur with low-profile tires, whichprovide less cushioning between the wheeland the road. Be careful to avoid road haz-ards and reduce your speed, especially ifyour vehicle is equipped with low-profiletires.

Indications of tire damage or other vehiclemalfunctions:

– Unusual vibrations.

– Unusual tire or running noises.

– Unusual handling such as a strong ten-dency to pull to the left or right.

Damage can be caused by the following sit-uations, for instance:

– Driving over curbs.

– Road damage.

– Tire inflation pressure too low.

– Vehicle overloading.

– Incorrect tire storage.

Safety information

Warning

Damaged tires can lose tire inflation pres-sure, which can lead to loss of vehicle con-trol. There is a risk of accident. If tire dam-age is suspected while driving,immediately reduce speed and stop. Havewheels and tires checked. For this pur-pose, drive carefully to the nearest dealer’sservice center or another qualified servicecenter or repair shop. Have vehicle towedor transported as needed. Do not repairdamaged tires, but have them replaced.

Warning

Tires can become damaged by driving overobstacles, e.g., curbs or road damage, athigh speed. Larger wheels have a smallertire cross-section. The smaller the tirecross-section, the higher the risk of tire

damage. There is a danger of accidents andproperty damage. If possible, avoid drivingover objects or road conditions that maydamage tires, or drive over them slowlyand carefully.

Changing wheels and tires

Mounting and wheel balancingHave mounting and tire and wheel balanc-ing carried out by a dealer’s service centeror another qualified service center or repairshop.

Wheel and tire combination

General informationYou can ask the dealer's service center oranother qualified service center or repairshop about the correct wheel/tire combina-tion and wheel rim versions for the vehicle.

Safety information

Warning

Wheels and tires which are not suitablefor your vehicle can damage parts of thevehicle, for instance due to contact withthe body due to tolerances despite thesame official size rating. There is a risk ofan accident. The manufacturer of your ve-hicle strongly suggests that you usewheels and tires that have been recom-mended by the vehicle manufacturer foryour vehicle type.

Seite 251



Warning

Incorrect wheel/tire combinations willhave a negative impact on the vehicle'shandling and on the function of a varietyof systems, such as the ABS Antilock Brak-ing System or DSC Dynamic Stability Con-trol. There is a risk of accident. To main-tain good handling and vehicle response,use only tires with a single tread configu-ration from a single manufacturer. Themanufacturer of the vehicle recommendsthat you use wheels and tires that havebeen recommended by the vehicle manu-facturer for your vehicle type. Followingtire damage, have the original wheel/tirecombination remounted on the vehicle assoon as possible.

Recommended tire brands

For each tire size, the manufacturer of thevehicle recommends certain tire brands.The tire brands can be identified by a staron the tire sidewall.

New tiresTire traction is not optimal due to manufac-turing circumstances when tires are brand-new; they achieve their full traction poten-tial after a break-in time.

Drive conservatively for the first200 miles/300 km.

Retreaded tires

Warning

Retreaded tires can have different tire cas-ing structures. With advanced age theservice life can be limited. There is a riskof an accident. The manufacturer of yourvehicle does not recommend the use of re-treaded tires.

The manufacturer of the vehicle does notrecommend the use of retreaded tires.

Winter tiresWinter tires are recommended for operat-ing on winter roads.

Although so-called all-season M+S tires pro-vide better winter traction than summertires, they usually do not provide the samelevel of performance as winter tires.

Maximum speed of winter tiresIf the maximum speed of the vehicle ishigher than the permissible speed for thewinter tires, then attach a label showing thepermissible maximum speed in the field ofview. The label is available from a dealer'sservice center or another qualified servicecenter or repair shop.

With winter tires mounted, observe and donot exceed the permissible maximum speed.

Changing runflat tiresFor your own safety, use only runflat tires.Further information is available from a deal-er's service center or another qualified serv-ice center or repair shop.

Rotating wheels between axlesDifferent wear patterns can occur on thefront and rear axles depending on individualdriving conditions. The tires can be rotatedin pairs between the axles to achieve even

Seite 252



wear. Further information is available froma dealer's service center or another qualifiedservice center or repair shop. After rotating,check the tire pressure and correct, ifneeded.

Storing tires

Tire inflation pressureDo not exceed the maximum tire inflationpressure indicated on the side wall of thetire.

StorageStore wheels and tires in a cool, dry anddark place.

Always protect tires against all contact withoil, grease, and solvents.

Do not leave tires in plastic bags.

Remove dirt from wheels or tires.

Run-flat tires

ConceptRun-flat tires permit continued driving un-der restricted conditions even in the eventof a complete loss of tire inflation pressure.

General informationThe wheels are composed of tires that areself-supporting to a limited degree.

The support of the sidewall allows the tireto remain drivable to a restricted degree inthe event of a tire inflation pressure loss.

Follow the instructions for continued driv-ing with a flat tire.

Safety information

Warning


Label

The tires are marked on the tire sidewallwith RSC Run-flat System Component.

Repairing a flat tire

Safety measures– Park the vehicle as far away as possible

from passing traffic and on solid ground.

– Switch on the hazard warning system.

– Secure the vehicle against rolling awayby setting the parking brake.

– Turn the steering wheel until the frontwheels are in the straight-ahead posi-tion and engage the steering wheel lock.

– Have all vehicle occupants get out of thevehicle and ensure that they remain out-

Seite 253



side the immediate area in a safe place,such as behind a guardrail.

– If necessary, set up a warning triangleat an appropriate distance.

Mobility System

ConceptWith the Mobility System, minor tire dam-age can be sealed temporarily to enable con-tinued travel. To accomplish this, sealant ispumped into the tires, which seals the dam-age from the inside.

General information– Follow the instructions on using the

Mobility System found on the compres-sor and sealant container.

– Use of the Mobility System may be inef-fective if the tire puncture measures ap-prox. 1/8 inches/4 mm or more.

– Contact a dealer's service center or an-other qualified service center or repairshop if the tire cannot be made drivable.

– Do not remove foreign bodies that havepenetrated the tire. Only remove foreignobjects if they are visibly protrudingfrom the tire.

– Pull the speed limit sticker off the seal-ant container and apply it to the steer-ing wheel.

– The use of a sealant can damage theTPM wheel electronics. In this case,have the TPM wheel electronics re-placed at the next opportunity.

– The compressor can be used to checkthe tire inflation pressure.

Overview

StorageThe Mobility System is located under thecargo floor panel.

Sealant container

– Sealant container, arrow 1.

– Filling hose, arrow 2.

Observe use-by date on the sealant con-tainer.

Compressor

1 Sealant container unlocking

2 Sealant container holder

3 Tire pressure gage

4 Reduce tire inflation pressure button

5 On/off switch

6 Compressor

7 Connector/cable for socket

8 Connection hose

Seite 254



Safety measures– Park the vehicle as far away as possible

from passing traffic and on solid ground.


– Secure the vehicle against rolling awayby setting the parking brake.

– Turn the steering wheel until the frontwheels are in the straight-ahead posi-tion and engage the steering wheel lock.

– Have all vehicle occupants get out of thevehicle and ensure that they remain out-side the immediate area in a safe place,such as behind a guardrail.

– If necessary, set up a warning triangleat an appropriate distance.

Filling the tire with sealant

Safety information

DANGER

If the exhaust pipe is blocked or ventila-tion is insufficient, harmful exhaust gasescan enter into the vehicle. The exhaustgases contain pollutants which are color-less and odorless. In enclosed areas, ex-haust gases can also accumulate outside ofthe vehicle. There is danger to life. Keepthe exhaust pipe free and ensure sufficientventilation.

NOTICE

The compressor can overheat during ex-tended operation. There is a risk of dam-age to property. Do not run the compres-sor for more than 10 minutes.

Filling1. Shake the sealant container.

2. Pull filling hose completely out of thecover of the sealant container. Do notkink the hose.

3. Slide the sealant container into theholder on the compressor housing, en-suring that it engages audibly.

Seite 255



4. Screw the filling hose of the sealant con-tainer onto the tire valve of the non-working wheel.

5. With the compressor switched off, in-sert the plug into the power socket in-side the vehicle.

6. With the ignition switched on or the en-gine running, switch on the compressor.

Let the compressor run for max. 10 minutesto fill the tire with sealant and achieve atire inflation pressure of approx. 2.5 bar.

While the tire is being filled with sealant,the tire inflation pressure may sporadicallyreach approx. 5 bar. Do not switch off thecompressor at this point.

Checking and adjusting the tireinflation pressure

Checking1. Switch off the compressor.

2. Read the tire inflation pressure on thetire pressure gage.

To continue the trip, a tire inflation pres-sure of at least 2 bar must be reached.

Removing and stowing the sealantcontainer1. Unscrew the filling hose of the sealant

container from the tire valve.

2. Press the red unlocking device.

3. Remove the sealant container from thecompressor.

4. Wrap and store the sealant container insuitable material to avoid dirtying thecargo area.

Minimum tire inflation pressure is notreached1. Pull the connector out of the power

socket inside the vehicle.

2. Drive 33 ft/10 m forward and back todistribute the sealant in the tire.

3. Screw the connection hose of the com-pressor directly onto the tire valve stem.

Seite 256



4. Insert the connector into the powersocket inside the vehicle.

5. With the ignition switched on or the en-gine running, switch on the compressor.

If a tire inflation pressure of at least2 bar cannot be reached, contact yourdealer's service center or another quali-fied service center or repair shop.

If a tire inflation pressure of at least2 bar is reached, see Minimum tire infla-tion pressure is reached.

6. Unscrew the connection hose of thecompressor from the tire valve.

7. Pull the connector out of the powersocket inside the vehicle.

8. Stow the Mobility System in the vehicle.

Minimum tire inflation pressure isreached1. Unscrew the connection hose of the

compressor from the tire valve.



4. Immediately drive approx.5 miles/10 km to ensure that the sealantis evenly distributed in the tire.

Do not exceed a speed of50 mph/80 km/h.

If possible, do not drive at speeds lessthan 12 mph/20 km/h.

Adjustment1. Stop at a suitable location.

2. Screw the connection hose of the com-pressor directly onto the tire valve stem.

3. Insert the connector into the powersocket inside the vehicle.

4. Correct the tire inflation pressure to atleast 2.0 bar.

– Increase tire inflation pressure: withthe ignition switched on or the en-gine running, switch on the com-pressor.

– Reduce tire inflation pressure: pressthe button on the compressor.

5. Unscrew the connection hose of thecompressor from the tire valve.



Continuing the tripDo not exceed the maximum permissiblespeed of 50 mph/80 km/h.

Seite 257



Reinitialize the Flat Tire Monitor, refer topage 141.

Reset the Tire Pressure Monitor, refer topage 137.

Replace the nonworking tire and the sealantcontainer of the Mobility System promptly.

Snow chains

General informationThe manufacturer of the vehicle has deter-mined certain wheels and tires to be suita-ble for operation on the vehicle.

Follow the snow chain manufacturer's in-structions.

Do not initialize the Flat Tire Monitor aftermounting snow chains, as doing so may re-sult in incorrect readings.

Do not reset the Tire Pressure Monitor TPMafter mounting snow chains, as doing somay result in incorrect readings.

When driving with snow chains, briefly ac-tivate Dynamic Traction Control DTC, ifneeded.

Safety information

Warning

With the mounting of snow chains on un-suitable tires, the snow chains can comeinto contact with vehicle parts. There maybe a risk of accident or risk of damage toproperty. Only mount snow chains on tiresthat are designated by their manufactureras suitable for the use of snow chains.

Warning

Insufficiently tight snow chains may dam-age tires and vehicle components. Theremay be a risk of accident or risk of damageto property. Make sure that the snowchains are always sufficiently tight. Re-tighten as needed according to the snowchain manufacturer's instructions.

Fine-link snow chainsThe manufacturer of the vehicle recom-mends the use of fine-link snow chains. Cer-tain types of fine-link snow chains havebeen tested by the manufacturer of the ve-hicle and recommended as road-safe andsuitable.

Information regarding suitable snow chainsis available from a dealer’s service center oranother qualified service center or repairshop.

UseUse only in pairs on the front wheels, equip-ped with the tires of the following size:

– 175/65 R 15.

– 175/60 R 16.

– 185/50 R 17.

John Cooper Works:

185/50 R 17.

Maximum speed with snow chainsDo not exceed a speed of 30 mph/50 km/hwhen using snow chains.

Changing wheels/tires

General informationWhen using run-flat tires or a flat tire kit, awheel does not always need to be changed

Seite 258



immediately when there is a loss of tire in-flation pressure due to a flat tire.

If needed, the tools for changing wheels areavailable as accessories from a dealer’sservice center or another qualified servicecenter or repair shop.

Safety information

DANGER

The vehicle jack is only provided for short-term lifting of the vehicle for wheelchanges. Even if all safety measures areobserved, there is a risk of the raised vehi-cle falling, if the vehicle jack tips over.There is a risk of injuries or danger to life.If the vehicle is raised, do not lie under thevehicle and do not start the engine.

DANGER

Supports such as wooden blocks under thevehicle jack reduce the capacity of the ve-hicle jack to bear weight. They have thepotential to exert too much strain on thevehicle jack, causing it to tip over and thevehicle to fall. There is a risk of injuries ordanger to life. Do not place supports underthe vehicle jack.

Warning

The jack, issued by the vehicle manufac-turer, is provided in order to perform awheel change in the event of a breakdown.The jack is not designed for frequent use;for example, changing from summer towinter tires. Using the jack frequently maycause it to become jammed or damaged.There is a risk of injury and risk of damageto property. Only use the jack to attach anemergency or spare wheel in the event ofa breakdown.

Warning

On soft, uneven or slippery ground, for ex-ample snow, ice, tiles, etc., the vehicle jackcan slip away. There is a risk of injury. Ifpossible, change the wheel on a flat, solid,and slip-resistant surface.

Warning

The vehicle jack is optimized for liftingthe vehicle and for the jacking points onthe vehicle only. There is a risk of injury.Do not lift any other vehicle or cargo usingthe vehicle jack.

Warning

When the vehicle jack is not inserted intothe jacking point provided for this pur-pose, the vehicle may be damaged or thevehicle jack may slip when it is beingcranked up. There is a risk of injury or riskof damage to property. When cranking upthe vehicle jack, ensure that it is insertedin the jacking point next to the wheelhousing.

Warning

A vehicle that is raised on a vehicle jackmay fall off of the jack if lateral forces areexerted on it. There is a risk of injury andrisk of damage to property. While the ve-hicle is raised, do not exert lateral forceson the vehicle or pull abruptly on the vehi-cle. Have a stuck wheel removed by a deal-er’s service center or another qualifiedservice center or repair shop.

Seite 259



Securing the vehicle against rolling

General informationThe vehicle manufacturer recommends toadditionally secure the vehicle against roll-ing away when changing a wheel.

On a level surface

Place wheel chocks or other suitable objectsin front and behind the wheel that is diago-nal to the wheel to be changed.

On a slight downhill gradient

If you need to change a wheel on a slightdownhill grade, place chocks and other suit-able objects, for instance a rock, under thewheels of both the front and rear axlesagainst the rolling direction.

Lug bolt lock

ConceptThe wheel lug bolts have a special coding.The lug bolts can only be released with theadapter which matches the coding.

OverviewThe adapter of the lug bolt lock is located inthe onboard vehicle tool kit, refer topage 276.

– Lug bolt, arrow 1.

– Adapter, arrow 2.

Unscrewing1. Attach the adapter to the lug bolt.

2. Unscrew the lug bolt.

3. Remove the adapter after unscrewingthe lug bolt.

Screwing on1. Attach the adapter to the lug bolt. If

necessary, turn the adapter until it fitson the lug bolt.

2. Screw on the lug bolt. The tighteningtorque is 140 Nm.

3. Remove the adapter and stow it afterscrewing on the lug bolt.

Preparing the vehicle– Park the vehicle on solid and non-slip

ground at a safe distance from traffic.

Seite 260





– Engage a gear or move the selector leverto position P.

– As soon as permitted by the traffic flow,have all vehicle occupants get out of thevehicle and ensure that they remain out-side the immediate area in a safe place,such as behind a guardrail.

– Depending on the vehicle equipment,get wheel change tools and, if necessary,the emergency wheel from the vehicle.

– If necessary, set up a warning triangleor portable hazard warning light at anappropriate distance.

– Secure the vehicle additionally againstrolling.

– Loosen the lug bolts a half turn.

Jacking points for the vehicle jack

The jacking points for the vehicle jack arelocated at the marked positions.

Jacking up the vehicle

Warning

Hands and fingers can be jammed whenusing the vehicle jack. There is a risk ofinjury. Comply with the described handposition and do not change this positionwhile using the vehicle jack.

1. Hold the vehicle jack with one hand, ar-row 1, and grasp the vehicle jack crankor lever with your other hand, arrow 2.

2. Insert the vehicle jack into the rectan-gular recess of the jacking point closestto the wheel to be changed.

Seite 261



3. Extend the vehicle jack by turning thevehicle jack crank or lever clockwise.

4. Take your hand away from the vehiclejack as soon as the vehicle jack is underload and continue turning the vehiclejack crank or lever with one hand.

5. Make sure that the vehicle jack footstands vertically and at a right angle be-neath the jacking point.

6. Make sure that the vehicle jack footstands vertically and perpendicularly be-neath the jacking point after extendingthe vehicle jack.

7. Crank the vehicle up, until the vehiclejack is with the entire surface on the

ground and the relevant wheel is maxi-mum 1.2 inches/3 cm above ground.

Mounting a wheelMount one emergency wheel only, as re-quired.

1. Unscrew the lug bolts.

2. Remove the wheel.

3. Put the new wheel or emergency wheelon and screw in at least two lug bolts ina crosswise pattern until hand-tight.

If non-original light-alloy wheels of thevehicle manufacturer are mounted, theaccompanying lug bolts may have to beused as well.

4. Hand-tighten the remaining lug boltsand tighten all lug bolts well in a cross-wise pattern.

5. Turn the vehicle jack crank counter-clockwise to retract the vehicle jack andlower the vehicle.

6. Remove the vehicle jack and stow it se-curely.

After the wheel change1. Tighten the lug bolts crosswise. The

tightening torque is 101 lbs ft/140 Nm.

2. Stow the nonworking wheel in the cargoarea, if necessary.

The nonworking wheel cannot be storedunder the cargo floor panel because ofits size.

3. Check tire inflation pressure at the nextopportunity and correct as needed.

4. Reinitialize the Flat Tire Monitor.

Reset the Tire Pressure Monitor TPM.

5. Check to make sure the lug bolts aretight with a calibrated torque wrench.

6. Have the damaged tire replaced at thenearest dealer's service center or an-

Seite 262



other qualified service center or repairshop.

Emergency wheel

ConceptIn the event of a flat tire, the emergencywheel can be used in place of the wheelwith the defective tire. The emergencywheel is only intended for temporary useuntil the defective tire/wheel has been re-placed.

General informationMount one emergency wheel only.

Also check the tire inflation pressure of theemergency wheel in the cargo area regu-larly, and correct it as needed.

Safety information

Warning

The emergency wheel has particular di-mensions. When driving with an emer-gency wheel, changed driving propertiesmay occur, for instance reduced lane sta-bility when braking, longer braking dis-tance, and changed self-steering proper-ties in the limit area. There is a risk ofaccident. Drive moderately and do not ex-ceed a speed of 50 mph/80 km/h.

OverviewThe emergency wheel is housed in a well onthe underbody of the vehicle. The screwconnection of the emergency wheel is underthe cargo floor panel, on the floor of thestorage compartment for the onboard vehi-cle tool kit.

The wheel change tools are under the cargofloor panel.

Removing the emergency wheel1. Loosen the nut using the wheel wrench

from the onboard vehicle tool kit.

2. Remove the retaining plate.

3. Screw wheel lug wrench onto the threadand hold in place with one hand.

4. Unlock the locking hexagon of the emer-gency wheel well using the hexagon at-tached to retaining plate.

5. Lower the emergency wheel with thewheel wrench.

6. Unscrewing the wheel wrench

7. Pull out the well with emergency wheelunder the vehicle toward the rear.

Seite 263



8. Remove the spacer and emergencywheel from the well.

9. Stow the well and spacer in the vehicle.

Replacing the tires1. Have the damaged tire replaced.

2. Replace the emergency wheel with thenew wheel.

Installing the emergency wheelHave the emergency wheel installed backinto the vehicle by a dealer’s service centeror another qualified service center or repairshop.

Seite 264



Engine compartment




Overview

1 Filler neck for washer fluid

2 Vehicle identification number

3 Oil filler neck

4 Jump-starting, positive terminal

5 Jump-starting, negative terminal

6 Coolant reservoir

Seite 265

Engine compartment MOBILITY


Hood

Safety information

Warning

Improperly executed work in the enginecompartment can damage vehicle compo-nents and impair vehicle functions. Thereis a risk of an accident and damage toproperty. Have work in the engine com-partment performed by a dealer’s servicecenter or another qualified service centeror repair shop.

Warning

The engine compartment accommodatesmoving components. Certain componentsin the engine compartment can also movewith the vehicle switched off, for instancethe radiator fan. There is a risk of injury.Do not reach into the area of moving parts.Keep articles of clothing and hair awayfrom moving parts.

Warning

There are protruding parts, for instancelocking hook, on the inside of the hood.There is a risk of injury. If the hood isopen, pay attention to protruding partsand keep clear of these areas.

Warning

An incorrectly locked hood can open whiledriving and restrict visibility. There is arisk of accident. Stop immediately and cor-rectly close the hood.

Warning

Body parts can be jammed when openingand closing the hood. There is a risk of in-jury. Make sure that the area of movementof the hood is clear during opening andclosing.

NOTICE

Folded-away wipers can be jammed whenthe hood is opened. There is a risk of dam-age to property. Make sure that the wiperswith the wiper blades mounted are foldeddown onto the windshield before openingthe hood.

NOTICE

When the hood is closed, it must engageon both sides. Pressing again can damagethe hood. There is a risk of damage toproperty. Open the hood again and thenclose it energetically. Avoid pressingagain.

Opening the hood1. Pull lever, arrow 1.

Hood is unlocked.

2. After the lever is released, pull the leveragain, arrow 2.

Hood can be opened.

Seite 266

MOBILITY Engine compartment


Indicator/warning lightsWhen the hood is opened, a Check Controlmessage is displayed.

Closing the hood

Energetically close the hood from approx.20 in/50 cm.

The hood must engage on both sides.

Seite 267

Engine compartment MOBILITY


Engine oil



General information

The engine oil consumption is dependent onyour driving style and driving conditions.

Therefore, regularly check the engine oillevel after refueling by taking a detailedmeasurement.

The engine oil consumption can increase inthe following situations, for instance:

– Sporty driving style.

– Break-in of the engine.

– Idling of the engine.

– With use of engine oil types that areclassified as not suitable.

Different Check Control messages appear,depending on the engine oil level.

Safety information

NOTICE

An engine oil level that is too low causesengine damage. There is a risk of damageto property. Immediately add engine oil.

NOTICE

Too much engine oil can damage the en-gine or the catalytic converter. There is arisk of damage to property. Do not add toomuch engine oil. When too much engineoil is added, have the engine oil level cor-rected by a dealer’s service center or an-other qualified service center or repairshop.

Electronic oil measurement

General informationThe electronic oil measurement has twomeasuring principles:

– Monitoring.

– Detailed measurement.

When making frequent short-distance tripsor using a dynamic driving style, for in-stance when taking curves aggressively,regularly perform a detailed measurement.

Monitoring

ConceptThe engine oil level is monitored electroni-cally while driving and can be shown on theControl Display.

Seite 268

MOBILITY Engine oil


If the engine oil level is outside its permis-sible operating range, a Check Control mes-sage is displayed.

A red indicator light indicates thatthe engine oil pressure is too low.

Functional requirementsA current measured value is available afterapprox. 30 minutes of normal driving.

Displaying the engine oil levelVia the Central Information Display (CID):

1. "My MINI"

2. "Vehicle status"


The engine oil level is displayed.

System limitsWhen making frequent short-distance tripsor using a dynamic driving style, it may notbe possible to calculate a measured value.In this case, the measured value for the last,sufficiently long trip is displayed.

Detailed measurement

ConceptThe engine oil level is checked when the ve-hicle is stationary and displayed via a scale.

If the engine oil level is outside its permis-sible operating range, a Check Control mes-sage is displayed.

General informationDuring the measurement, the idle speed isincreased somewhat.

Functional requirements– Vehicle is parked in a horizontal posi-

tion.

– Manual transmission: shift lever in neu-tral position, clutch and accelerator ped-als not depressed.

– Steptronic transmission: selector leverin selector lever position N or P and ac-celerator pedal not depressed.

– Engine is running and is at operatingtemperature.

Performing a detailed measurementVia the Central Information Display (CID):

1. "My MINI"

2. "Vehicle status"


4. "Measure engine oil level"

5. "Start measurement"

The engine oil level is checked and dis-played via a scale.

Adding engine oil

General informationOnly add engine oil when the message isdisplayed in the instrument cluster. Thequantity to be added is indicated in themessage displayed in the instrument clus-ter.

Only add suitable types of engine oil, referto page 271.

Safely park the vehicle and switch off theignition before adding engine oil.

Take care not to add too much engine oil.

Seite 269

Engine oil MOBILITY


Safety information

Warning

Operating materials, for instance oils,greases, coolants, fuels, can contain harm-ful ingredients. There is a risk of injuriesor danger to life. Follow the instructionson the containers. Avoid the contact of ar-ticles of clothing, skin or eyes with operat-ing materials. Do not refill operating mate-rials into different bottles. Store operatingmaterials out of reach of children.

NOTICE

An engine oil level that is too low causesengine damage. There is a risk of damageto property. Immediately add engine oil.

NOTICE

Too much engine oil can damage the en-gine or the catalytic converter. There is arisk of damage to property. Do not add toomuch engine oil. When too much engineoil is added, have the engine oil level cor-rected by a dealer’s service center or an-other qualified service center or repairshop.

OverviewThe oil filler neck is located in the enginecompartment, refer to page 265.

Adding engine oil1. Open the hood, refer to page 266.

2. Open the lid counterclockwise.

3. Add engine oil.

4. Close the lid.

Engine oil types to add

General informationThe engine oil quality is critical for the lifeof the engine.

Only add the types of engine oil which arelisted.

Safety information

NOTICE

Oil additives can damage the engine.There is a risk of damage to property. Donot use oil additives.

NOTICE

Incorrect engine oil can cause malfunc-tions in the engine or damage it. There is arisk of damage to property. When select-ing an engine oil, make sure that the en-gine oil has the correct oil rating.

Seite 270

MOBILITY Engine oil


Suitable engine oil typesAdd engine oils that meet the following oilrating standards:

Gasoline engine

BMW Longlife-01 FE.

BMW Longlife-14 FE+.

BMW Longlife-17 FE+.

Alternative engine oil typesIf an engine oil suitable for continuous useis not available, up to 1 US quart/liter of anengine oil with the following oil rating canbe added:

Oil rating

API SL.

API SM.

API SN.

Viscosity gradesWhen selecting an engine oil, make surethat the engine oil belongs to one of the fol-lowing viscosity grades:

Viscosity grades

SAE 0W-20.

SAE 0W-30.

More information about suitable oil ratingsand viscosity grades of engine oils can berequested from a dealer’s service center oranother qualified service center or repairshop.

Engine oil change

NOTICE

Engine oil that is not changed in timelyfashion can cause increased engine wearand thus engine damage. There is a risk ofdamage to property. It is recommendedthat you do not exceed the service inter-vals indicated in the vehicle.

The vehicle manufacturer recommends thatyou have a dealer's service center or an-other qualified service center or repair shopchange the engine oil.

Seite 271

Engine oil MOBILITY


Coolant



General information

Coolant consists of water and additives.

Not all commercially available additives aresuitable for the vehicle. Do not mix addi-tives of different colors. Observe the water -additive mixing ratio of 50:50. Informationabout suitable additives is available from adealer’s service center or another qualifiedservice center or repair shop.

Safety information

Warning

With the engine hot and the cooling sys-tem open, coolant can escape and lead toscalding. There is a risk of injury. Onlyopen the cooling system with the enginecooled down.

Warning

Additives are harmful and incorrect addi-tives can damage the engine. There is arisk of injury and risk of damage to prop-erty. Do not allow additives to come intocontact with skin, eyes or articles of cloth-ing. Use suitable additives only.

Coolant level

CheckingThere are yellow Min and Max marks in thecoolant reservoir.

1. Let the engine cool.

2. Open the hood, refer to page 266.

3. Turn the lid of the coolant reservoirslightly counterclockwise to allow anyexcess pressure to dissipate, then openit.

4. Open the coolant reservoir lid.

Seite 272

MOBILITY Coolant


5. The coolant level is correct if it lies be-tween the minimum and maximummarks in the filler neck.

6. Close the lid.

Adding coolant1. Let the engine cool.


3. Turn the lid of the coolant reservoirslightly counterclockwise to allow anyexcess pressure to dissipate, then openit.

4. Open the coolant reservoir lid.

5. If the coolant is low, slowly add coolantup to the specified level; do not overfill.

6. Close the lid.

7. Have the cause of the coolant loss elimi-nated as soon as possible.

Disposal

Comply with the relevant environ-mental protection regulations whendisposing of coolant and coolant ad-

ditives.

Seite 273

Coolant MOBILITY


Maintenance



MINI maintenance system

The maintenance system provides servicenotifications and thereby provides supportin maintaining road safety and the opera-tional reliability of the vehicle.

In some cases, scopes and intervals of themaintenance system may vary according tothe country version. Replacement work,spare parts, fuels and lubricants, and wearmaterials are calculated separately. Furtherinformation is available from a dealer's serv-ice center or another qualified service cen-ter or repair shop.

Condition Based Service CBS

ConceptSensors and special algorithms take into ac-count the driving conditions of the vehicle.CBS uses these to calculate the need formaintenance.

The system makes it possible to adapt theamount of maintenance corresponding toyour user profile.

General informationInformation on service notifications, referto page 116, can be displayed on the ControlDisplay.

Service data in the vehicle keyInformation on the service notifications iscontinuously stored in the vehicle key. Theservice center can read this data out andsuggest a maintenance scope for the vehi-cle.

Therefore, hand the service advisor the ve-hicle key with which the vehicle was drivenmost recently.

Storage periodsStorage periods during which the vehiclebattery was disconnected are not taken intoaccount.

If this occurs, have a dealer's service centeror another qualified service center or repairshop update the time-dependent mainte-nance procedures, such as checking brakefluid and, if necessary, changing the engineoil and the microfilter/activated-charcoalfilter.

Maintenance Manual andService and Warranty Infor-mation Booklet for US modelsand Warranty and ServiceGuide Booklet for Canadianmodels

Please consult your Maintenance Manualand Service and Warranty InformationBooklet for US models and Warranty and

Seite 274

MOBILITY Maintenance


Service Guide Booklet for Canadian modelsfor additional information on the perform-ance of service and maintenance work.

The manufacturer of your vehicle recom-mends that maintenance and repair be per-formed by a service center or another quali-fied service center or repair shop. Recordsof regular maintenance and repair workshould be retained.

Socket for OBD Onboard Diag-nosis

General informationDevices connected to the OBD socket trig-ger the alarm system when the vehicle islocked. Remove any devices connected atthe OBD socket before locking the vehicle.

Safety information

NOTICE

The socket for Onboard Diagnosis is an in-tricate component intended to be used inconjunction with specialized equipment tocheck the vehicle’s primary emissions sys-tem. Improper use of the socket for On-board Diagnosis, or contact with thesocket for Onboard Diagnosis for otherthan its intended purpose, can cause vehi-cle malfunctions and creates risks of per-sonal and property damage. Given the fore-going, the manufacture of your vehiclestrongly recommends that access to thesocket for Onboard Diagnosis be limited toa dealer's service center or another quali-fied service center or repair shop or otherpersons that have the specialized trainingand equipment for purposes of properlyutilizing the socket for Onboard Diagnosis.

Position

There is an OBD socket on the driver's sidefor checking the primary components in thevehicle's emissions.

Emissions– The warning light lights up:

Emissions are deteriorating.Have the vehicle checked as soonas possible.

– The warning light flashes under certaincircumstances:

This indicates that there is excessivemisfiring in the engine.

Reduce the vehicle speed and have thesystem checked immediately; otherwise,serious engine misfiring within a briefperiod can seriously damage emissioncontrol components, in particular thecatalytic converter.

Seite 275

Maintenance MOBILITY


Replacing components



Vehicle tool kit

Depending on the vehicle equipment, theonboard vehicle tool kit is located on theright side under the cargo floor panel or in abag on the right side of the cargo area.

After use, secure the bag with the onboardvehicle tool kit on a lashing eye again.

Wiper blades

Safety information

NOTICE

The window may sustain damage if thewiper falls onto it without the wiper bladeinstalled. There is a risk of damage toproperty. Hold the wiper firmly whenchanging the wiper blade. Do not fold orswitch on the wiper without a wiper bladeinstalled.

NOTICE

Folded-away wipers can be jammed whenthe hood is opened. There is a risk of dam-age to property. Make sure that the wiperswith the wiper blades mounted are foldeddown onto the windshield before openingthe hood.

Replacing the front wiper blades1. To change the wiper blades, fold up the

wiper arms.

2. Fold up and hold the wiper arm firmly.

3. Open the wiper blade lock, arrow.

Seite 276

MOBILITY Replacing components


4. Pull the wiper blade down out of theholder on the wiper arm, arrow 1.

5. Pull the wiper blade free from the holderof the wiper arm, arrow 2.

6. Insert and latch a new wiper blade in re-verse order.

7. Fold down the wiper arm.

Light and bulb replacement

General information

Lights and bulbsLights and bulbs make an essential contri-bution to vehicle safety.

The manufacturer of the vehicle recom-mends that you have appropriate work per-formed by a dealer’s service center or an-other qualified service center or repair shopif you are unfamiliar with it or if it has notbeen described here.

A spare light box is available from a dealer'sservice center or another qualified servicecenter or repair shop.

Follow the safety information, refer topage 277.

Light-emitting diodes (LEDs)Some items of equipment use light-emittingdiodes installed behind a cover as a lightsource. These light-emitting diodes are re-lated to conventional lasers and are offi-

cially designated as Class 1 light-emittingdiodes.

Follow the safety information, refer topage 277.

Safety information

Lights and bulbs

Warning

Bulbs can get hot during operation. Con-tact with the bulbs can cause burns. Thereis a risk of injury. Only change bulbs afterthey have cooled off.

Warning

Work on switched-on lighting systems cancause short circuits. There is a risk of in-jury or risk of damage to property. Whenworking on the lighting system, switch offthe lights in question. If necessary, heedthe bulb manufacturer's instructions.

NOTICE

Dirty bulbs have a reduced service life.There is a risk of damage to property. Donot hold new bulbs with your bare hands.Use a clean cloth or something similar, orhold the bulb by its base.

Light-emitting diodes (LEDs)

Warning

Intensive brightness can irritate or dam-age the retina of the eye. There is a risk ofinjury. Do not look directly into the head-lights or other light sources. Do not re-move the LED covers.

Seite 277

Replacing components MOBILITY


Headlight glassCondensation can form on the inside of theheadlight glass in cool or humid weather.When driving with the lights switched on,the condensation evaporates after a shorttime. The headlight glass does not need tobe changed.

If despite driving with the headlightsswitched on, increasing humidity forms, forinstance water droplets in the light, havethe headlights checked.

Headlight settingThe headlight adjustments can be affectedby changing lights and bulbs. After theheadlight adjustment was changed, have itchecked and, if necessary, corrected by adealer’s service center or another qualifiedservice center or repair shop.

Front halogen lights, bulbreplacement

Overview

Halogen headlights

1 Low beams/high beams

2 Turn signal

Low beams/high beamsFollow the general instructions on lightsand bulbs, refer to page 277.

55-watt bulb, HB2.


2. Turn the lid counterclockwise, arrow,and remove.

3. Pull off the connector.

4. Unclip spring clip, arrow, and fold down.

5. Remove the bulb from the headlighthousing.

6. Insert the new bulb and install the coverin the reverse order.

Turn signalFollow the general instructions on lightsand bulbs, refer to page 277.

Seite 278



21-watt bulb, PY21W.

1. Turn the steering wheel.

2. Turn the lid counterclockwise, arrow 1,and remove.

3. Unscrew the inner cover counterclock-wise, and remove it.

4. Turn the bulb socket counterclockwiseand remove it from the bulb housing.

5. Pull the bulb out of the fixture.

6. Insert the new bulb and install the coverin the reverse order.

LED front lights, bulb replacementAll lights feature LED technology.

In the case of a malfunction, contact a deal-er's service center or another qualified serv-ice center or repair shop.

LED front fog lightsThese front fog lights are made using LEDtechnology. In the case of a malfunction,contact a dealer's service center or anotherqualified service center or repair shop.

Tail lights, bulb replacement

Overview

Vehicles with a rear fog light

1 Side tail lights

2 Rear fog light

3 License plate light

4 Center brake light

Vehicle with two rear fog lights

1 Side tail lights

2 Rear fog lights

Seite 279



3 License plate light

4 Center brake light

Side tail lights

1 Tail lights

2 Turn signal

3 Brake light

4 Reversing lights

Side tail lights with Union Jack

1 Tail lights

2 Turn signals/brake lights

3 Turn signals/brake lights

4 Reversing lights

Side tail lights

Without Union Jack

Follow the general instructions on lightsand bulbs, refer to page 277.

– Bulb, brake lights: H21W.

– Bulb, turn signals: P21W.

– Bulb, reversing lights: P21W.

1. Opening trunk lid.

2. Remove left or right cover.

3. Through the opening, loosen the plugconnector, arrow 2 on the bulb holder.

Press the latches together, arrows 1, andremove the bulb holder.

4. Remove the bulb holder from the open-ing.

5. Press the nonworking bulb gently intothe socket, turn counterclockwise andremove.

– Arrow 1: brake lights

– Arrow 2: turn signal

Seite 280



– Arrow 3: reversing light

6. Proceed in the reverse order to insertthe new bulb and attach the bulb holder.Make sure that the bulb holder engagesin all fasteners.

With Union Jack

Follow the general instructions on lightsand bulbs, refer to page 277.

Bulb, reversing lights: P21W.

1. Opening trunk lid.

2. Remove left or right cover.

3. Turn the bulb holder for the reversinglight, arrow, counterclockwise and re-move it.

4. Remove the bulb holder from the open-ing.

5. Press the nonworking bulb gently intothe socket, turn counterclockwise andremove.

6. Proceed in the reverse order to insertthe new bulb and attach the bulb holder.Make sure that the bulb holder engagesin all fasteners.

Central brake light and license platelightsFollow the general instructions on lightsand bulbs, refer to page 277.

The lights feature LED technology. In thecase of a malfunction, contact a dealer'sservice center or another qualified servicecenter or repair shop.

Side turn signal, bulb replacementFollow the general instructions on lightsand bulbs, refer to page 277.

Bulbs:

Seite 281



– With white lens: WY5W.

1. Open the hood. The covers of the sideturn signal lights are on the left andright next to the hinges of the hood.

2. Loosen the nuts of the cover by hand orwith the onboard vehicle tool kit, referto page 276, and remove the cover.

3. Turn the bulb socket counterclockwiseand remove.

4. Replace the bulb.

5. To insert the new bulb, proceed in re-verse order of removal.

Insert the nuts of the cover and pressdown.

Side scuttles

Individual side scuttles for clicking into theside turn signals are available as originalMINI accessories.

Follow the assembly instructions.

Vehicle battery

General informationThe battery is maintenance-free.

More information about the battery can berequested from a dealer's service center oranother qualified service center or repairshop.

Safety information

Warning

Vehicle batteries that are not compatiblecan damage vehicle systems and impairvehicle functions. There is a risk of an ac-cident and damage to property. Only vehi-cle batteries that are compatible with yourvehicle type should be installed in your ve-hicle. Information on compatible vehiclebatteries is available at your dealer’s serv-ice center.

Register the battery to the vehicleThe manufacturer of the vehicle recom-mends that you have a service center or an-

Seite 282



other qualified service center or repair shopregister the vehicle battery to the vehicleafter the battery has been replaced. Oncethe battery has been registered again, allcomfort features will be available withoutrestriction and any Check Control messagesdisplayed which relate to comfort featureswill disappear.

Charging the battery

General informationMake sure that the battery is always suffi-ciently charged to guarantee that the bat-tery remains usable for its full service life.

A discharged battery is indicated bya red indicator light.

Charge the battery in the following situa-tions:

– When the inspection glass on the top ofthe battery is black.

– When the take-off performance is insuf-ficient.

The following circumstances can have anegative effect on the performance of thebattery:

– Frequent short-distance drives.

– The vehicle is not used for more than amonth.

Safety information

NOTICE

Battery chargers for the vehicle batterycan work with high voltages and currents,which means that the 12 volt on-boardnetwork can be overloaded or damaged.There is a risk of damage to property. Onlyconnect battery chargers for the vehiclebattery to the starting aid terminals in theengine compartment.

Charging the batteryCharge the battery only when the engine isoff and via the starting aid terminals, referto page 288, in the engine compartment.

Power failureAfter a power loss, some equipment needsto be newly initialized or individual settingsupdated, for example:

– Memory function: store the positionsagain.

– Time: update.

– Date: update.

Disposing of old batteriesHave old batteries disposed of by adealer’s service center or anotherqualified service center or repair

shop or take them to a collection point.

Maintain the filled battery in an upright po-sition for transport and storage. Secure thebattery so that it does not tip over duringtransport.

Fuses

Safety information

Warning

Incorrect and repaired fuses can overloadelectrical lines and components. There is arisk of fire. Never attempt to repair ablown fuse. Do not replace a nonworkingfuse with a substitute of another color oramperage rating.

Seite 283



Accessing the fusesThe fuses are located in the glove compart-ment.

1. Open the glove compartment.

2. Swing the cover down, arrow.

Information on the fuse types and locations,as well as the positions of any other fuseboxes, is available on the Internet:www.mini.com/fusecard.

Where applicable, information on the fusetypes and locations is also found on a sepa-rate sheet in the fuse box.

Replacing fusesThe vehicle manufacturer recommends thatyou have a dealer's service center or an-other qualified service center or repair shopreplace the fuses.

Seite 284



Breakdown assistance



Hazard warning flashers

The button is located above the Control Dis-play.

The red light in the button flashes when thehazard warning flashers are activated.

Warning triangle

The warning triangle is located in the cargoarea.

First-aid kit

General informationSome of the articles have a limited servicelife.

Check the expiration dates of the contentsregularly and replace any expired itemspromptly.

StorageThe first-aid kit is located in the cargo area.

MINI Roadside Assistance

ConceptMINI Roadside Assistance can be contactedif assistance is needed in the event of abreakdown.

Seite 285

Breakdown assistance MOBILITY


General informationIn the event of a breakdown, data on the ve-hicle's condition is sent to the vehicle man-ufacturer.

There are various ways of making contact.

– Via a Check Control message, refer topage 110.

– Calling with a mobile phone.

Requirements– Active MINI Connected contract or

equipment version with intelligentemergency call.

– Cellular network reception.

– The ignition is switched on.

StartingIf the vehicle is equipped with Teleservices,support is offered through Teleservice Diag-nosis.


1. "MINI Connected"

2. "MINI Assist"

3. "MINI Roadside Assistance"

The contact to the Roadside Assistanceof the manufacture is established.

A telephone number is displayed, ifneeded. Select to dial the telephonenumber on a connected mobile phone.

Teleservice DiagnosisTeleservice Diagnosis enables the wirelesstransmission of detailed vehicle data that isimportant for vehicle diagnosis. This data istransmitted automatically.

Teleservice HelpDepending on the country, the TeleserviceHelp enables a more in-depth diagnosis ofthe vehicle via wireless transmission.

You can launch Teleservice Help by re-questing it through the Service Specialist.

1. Park the vehicle in a safe place.


3. Control Display is switched on.

4. Confirm Teleservice Help.

The driving ability of the vehicle can be re-stored for specific functions.

If this is not possible, further measures willbe initiated, for instance Roadside Assis-tance will be informed.

Emergency Request

Intelligent emergency call

ConceptIn case of an emergency, an Emergency Re-quest can be triggered automatically by thesystem or manually.

General informationOnly press the SOS button in an emergency.

The Intelligent Assist system establishes aconnection with the MINI Response Center.

For technical reasons, the Emergency Re-quest cannot be guaranteed under unfavora-ble conditions.

Seite 286

MOBILITY Breakdown assistance


Overview

SOS button at the interior mirror

Functional requirements– The ignition is switched on.

– The Assist system is functional.

– If the vehicle is equipped with intelli-gent emergency call: the SIM cardintegrated in the vehicle has been acti-vated.

Automatic triggeringUnder certain conditions, for instance if theairbags trigger, an Emergency Request isautomatically initiated immediately after anaccident of corresponding severity. Auto-matic Collision Notification is not affectedby pressing the SOS button.

Manual triggering1. Press the cover briefly to open it.

2. Press the SOS button until the LED atthe button lights up green.

– The LED is illuminated green when anEmergency Request has been initiated.

If the situation allows, wait in your vehi-cle until the voice connection has beenestablished.

– The LED flashes green when a connec-tion to the MINI Response Center hasbeen established.

The MINI Response Center then makescontact with you and takes further stepsto help you.

Even if you are unable to respond, theMINI Response Center can take furthersteps to help you under certain circum-stances.

For this purpose, data that serves to de-termine the necessary rescue measures,for instance the current position of thevehicle when it can be determined, istransmitted to the MINI Response Cen-ter.

If you can no longer hear the MINI Re-sponse Center through the loudspeakers,the hands-free system, for instance, maybe broken. However, the MINI ResponseCenter may still be able to hear you.

The MINI Response Center ends the Emer-gency Request.

Jump-starting

General informationIf the battery is discharged, the engine canbe started using the battery of another vehi-cle and two jumper cables. Only use jumpercables with fully insulated clamp handles.

Safety information

DANGER

Contact with live components can lead toan electric shock. There is a risk of inju-ries or danger to life. Do not touch anycomponents that are under voltage.

Seite 287



Warning

If the jumper cables are connected in theincorrect order, sparking may occur. Thereis a risk of injury. Pay attention to the cor-rect order during connection.

NOTICE

In the case of body contact between thetwo vehicles, a short circuit can occur dur-ing jump-starting. There is a risk of dam-age to property. Make sure that no bodycontact occurs.

Preparation1. Check whether the battery of the other

vehicle has a voltage of 12 volts. Thevoltage information can be found on thebattery.

2. Switch off the engine of the assistingvehicle.

3. Switch off any electronic systems/powerconsumers in both vehicles.

Starting aid terminals

The starting aid terminal in the engine com-partment acts as the battery's positive ter-minal.

Open the cover of the starting aid terminal.

The body ground or a special nut acts as thebattery negative terminal.

Connecting the cablesTo prevent personal injury or damage toboth vehicles, adhere strictly to the follow-ing procedure.

1. Pull off the lid of the starting aid termi-nal.

2. Attach one terminal clamp of the posi-tive jumper cable to the positive termi-nal of the battery, or to the correspond-ing starting aid terminal of the vehicleproviding assistance.

3. Attach the terminal clamp on the otherend of the cable to the positive terminalof the battery, or to the correspondingstarting aid terminal of the vehicle to bestarted.

4. Attach one terminal clamp of the nega-tive jumper cable to the negative termi-nal of the battery, or to the correspond-ing engine or body ground of assistingvehicle.

5. Attach the second terminal clamp to thenegative terminal of the battery, or tothe corresponding engine or bodyground of the vehicle to be started.

Seite 288



Starting the engineNever use spray fluids to start the engine.

1. Start the engine of the assisting vehicleand let it run for several minutes at anincreased idle speed.

2. Start the engine of the vehicle that is tobe started in the usual way.

If the first starting attempt is not suc-cessful, wait a few minutes before mak-ing another attempt in order to allow thedischarged battery to recharge.

3. Let both engines run for several mi-nutes.

4. Disconnect the jumper cables in the re-verse order.

Check the battery and recharge, if needed.

Tow-starting and towing

Safety information

Warning


Steptronic transmission withdriven front axle: transporting thevehicle

General informationThe vehicle must not be towed if the frontwheels are touching the ground.

Safety information

NOTICE

The vehicle can be damaged when towingthe vehicle with a lifted rear axle. There isa risk of damage to property. Have vehicletransported only with lifted front axle oron a loading platform.

Pushing the vehicleTo remove a broken-down vehicle from thedanger area, it can be pushed for a shortdistance.

For rolling or pushing the vehicle, refer topage 104.

Tow truck

Your vehicle should be transported with atow truck with a so-called lift bar or on aflat bed.

NOTICE

The vehicle can become damaged whenlifting and securing it.

There is a risk of damage to property.

– Lift the vehicle using suitable means.

– Do not lift or secure the vehicle by itstow fitting, body parts, or suspensionparts.

Seite 289



Manual transmission

Towing or pushing the vehicleA broken-down vehicle can be towed orpushed.

For rolling or pushing the vehicle, refer topage 101.

NOTICE

If manual unlocking of the parking brakeis not possible, the vehicle cannot bemoved or towed. There is a risk of damageto property. The vehicle should only betransported on a loading platform.

Follow the following instructions:

– Make sure that the ignition is switchedon; otherwise, the low beams, tail lights,turn signals, and wipers may be unavail-able.

– Do not tow the vehicle with the rearaxle tilted, as the front wheels couldturn.

– When the engine is stopped, there is nopower assist. Consequently, more forceneeds to be applied when braking andsteering.

– Larger steering wheel movements arerequired.

– The towing vehicle must not be lighterthan the vehicle being towed; otherwise,it will not be possible to control the ve-hicle's response.

– Do not exceed a towing speed of30 mph/50 km/h.

– Do not exceed a towing distance of30 miles/50 km.

Tow truck

With driven front axle

Your vehicle should be transported with atow truck with a so-called lift bar or on aflat bed.

NOTICE

The vehicle can become damaged whenlifting and securing it.

There is a risk of damage to property.

– Lift the vehicle using suitable means.

– Do not lift or secure the vehicle by itstow fitting, body parts, or suspensionparts.

Towing other vehicles

General informationSwitch on the hazard warning system, de-pending on local regulations.

If the electrical system has failed, clearlyidentify the vehicle being towed by placinga sign or a warning triangle in the rear win-dow.

Seite 290



Safety information

Warning

If the approved gross vehicle weight of thetowing vehicle is lighter than the vehicleto be towed, the tow fitting can tear off orit will not be possible to control the vehi-cle's response. There is a risk of accident.Make sure that the gross vehicle weight ofthe towing vehicle is heavier than the ve-hicle to be towed.

NOTICE

If the tow bar or tow rope is attached in-correctly, damage to other vehicle partscan occur. There is a risk of damage toproperty. Correctly attach the tow bar ortow rope to the tow fitting.

Tow barThe tow fittings used should be on the sameside on both vehicles.

Should it prove impossible to avoid mount-ing the tow bar at an offset angle, please fol-low the following:

– Maneuvering capability is limited goingaround corners.

– The tow bar will generate lateral forcesif it is secured with an offset.

Tow ropeObserve the following notes when using thetow rope:

– Use nylon ropes or straps, which will en-able the vehicle to be towed withoutjerking.

– Make sure the tow rope is not twistedwhen fastening.

– Check the fastening of the tow fittingand tow rope in regular intervals.

– Do not exceed a towing speed of30 mph/50 km/h.

– Do not exceed a towing distance of3 miles/5 km.

– When starting to tow the vehicle, makesure that the tow rope is taut.

Tow fitting

General information

The screw-in tow fitting should always becarried in the vehicle.

The tow fitting can be screwed in at thefront or rear of the vehicle.

The tow fitting and the onboard vehicle toolkit, refer to page 276, are together in thecargo area.

Use of the tow fitting:

– Use only the tow fitting provided withthe vehicle and screw it all the way in.

– Use the tow fitting for towing on pavedroads only.

– Avoid lateral loading of the tow fitting,for instance do not lift the vehicle by thetow fitting.

– Check the fastening of the tow fitting inregular intervals.

Seite 291



Safety information

NOTICE

If the tow fitting is not used as intended,there may be damage to the vehicle or tothe tow fitting. There is a risk of damageto property. Follow the notes on using thetow fitting.

Screw thread for tow fitting

Threaded holes for the tow fitting are lo-cated in the front and rear of the vehicle onthe right side with respect to the directionof travel.

Press on the mark on the edge of the coverto push it out.

Tow-starting

Steptronic transmissionDo not tow-start the vehicle.

Tow-starting the engine is not possible dueto the Steptronic transmission.

Have the reasons for the starting difficultiescorrected by a dealer’s service center or an-other qualified service center or repairshop.

Manual transmissionIf possible, do not tow-start the vehicle butstart the engine by jump-starting, refer topage 287. If the vehicle is equipped with a

catalytic converter, only tow-start while theengine is cold.

1. Switch on the hazard warning systemand comply with local regulations.

2. Switch on the ignition, refer to page 86.

3. Engage third gear.

4. Have the vehicle tow-started with theclutch pedal pressed and slowly releasethe pedal. After the engine starts, imme-diately press on the clutch pedal again.

5. Stop at a suitable location, remove thetow bar or rope, and switch off the haz-ard warning system.

6. Have the vehicle checked by a dealer'sservice center or another qualified serv-ice center or repair shop.

Seite 292



Care



Washing the vehicle

General informationRegularly remove foreign objects such asleaves in the area below the windshieldwhen the hood is raised.

Wash your vehicle frequently, particularlyin winter. Intense soiling and road salt candamage the vehicle.

Steam jets or high-pressurewashers

Safety information

NOTICE

When cleaning with high-pressure wash-ers, components can be damaged due tothe pressure or temperatures being toohigh. There is a risk of damage to property.Maintain sufficient distance and do notspray too long continuously. Follow theoperating instructions for the high-pres-sure washer.

Distances and temperature– Maximum temperature: 140 ℉/60 ℃.

– Minimum distance from sensors, cam-eras, seals: 12 inches/30 cm.

Automatic vehicle washes

Safety information

NOTICE

Water can penetrate in the windshieldarea due to high-pressure washers. Thereis a risk of damage to property. Do notdrive into high-pressure car wash systems.

NOTICE

Improper use of automatic washing sys-tems or car washes can cause damage tothe vehicle. There is a risk of damage toproperty. Follow the following instruc-tions:

– Give preference to cloth car washesor those that use soft brushes in or-der to avoid paint damage.

– Do not drive through a car wash withguide rails higher than 4 in/10 cm toavoid damage to the chassis.

– Observe the tire width of the guiderail to avoid damage to tires and rims.

– Fold in exterior mirrors to avoid dam-age to the exterior mirrors.

– Unscrew the rod antenna to avoid therod antenna breaking off.

– Deactivate the wiper and, if neces-sary, rain sensor to avoid damage tothe wiper system.

Seite 293

Care MOBILITY


– Do not treat the convertible top withwax. Ensure that a cycle without waxor a special cycle for convertibles isavailable to avoid damage to theconvertible top.

Driving into a car wash with a manualtransmissionIn car washes, the vehicle must be able toroll freely.

Rolling or pushing the vehicle, refer topage 101.

Driving into a car wash with aSteptronic transmissionIn car washes, the vehicle must be able toroll freely.

Rolling or pushing the vehicle, refer topage 104.

Some car washes do not permit persons inthe vehicle. The vehicle cannot be lockedfrom the outside when in selector lever po-sition N. A signal is sounded when an at-tempt is made to lock the vehicle.

Driving out of a car washEnsure that the vehicle key is in the car.

Start the engine, refer to page 87.

HeadlightsDo not rub wet headlights dry and do notuse abrasive or acidic cleaning agents.

Soak areas that have been dirtied, for in-stance from insects, with shampoo andwash off with water.

Thaw ice with de-icing spray; do not use anice scraper.

After washing the vehicleAfter washing the vehicle, apply the brakesbriefly to dry them; otherwise, braking ac-tion can be reduced. The heat generated

during braking dries brake discs and brakepads and protects them against corrosion.

Completely remove all residues on the win-dows, to minimize loss of visibility due tosmearing and to reduce wiper noises andwiper blade wear.

Vehicle care

Vehicle care products

General informationMINI recommends using vehicle care andcleaning products from MINI. Suitable careproducts are available from a dealer’s serv-ice center or another qualified service cen-ter or repair shop.

Safety information

Warning

Cleansers can contain substances that aredangerous and harmful to your health.There is a risk of injury. When cleaningthe interior, open the doors or windows.Only use products intended for cleaningvehicles. Follow the instructions on thecontainer.

Vehicle paint

General informationRegular care contributes to driving safetyand value retention. Environmental influen-ces in areas with elevated air pollution ornatural contaminants, such as tree resin orpollen can affect the vehicle's paintwork.Tailor the frequency and extent of your ve-hicle care to these influences.

Aggressive substances such as spilled fuel,oil, grease or bird droppings, must be re-

Seite 294

MOBILITY Care


moved immediately to prevent the finishfrom being altered or discolored.

Matte finishOnly use cleaning and care products suita-ble for vehicles with matte finish.

Caring for the convertible top

General informationThe appearance and life of the convertibletop depend on correct care and operation.

Follow the following instructions:

– Clean roofliner with a microfiber cloth.Dampen the cloth lightly with water, ifneeded.

– Do not soak the roofliner.

– To avoid water stains, spots of mold, andchafe marks, do not keep the convertibletop enclosed in its case for a long periodof time. Do not fold up the convertibletop or stow it in its case if it is wet orfrozen.

– Remove any water stains that have ap-peared on the roofliner using a micro-fiber cloth and an interior cleaner.

– When the vehicle is parked in enclosedareas for lengthy periods, ensure thatthe area is well ventilated.

– Park the vehicle in the shade to protectit from intensive solar radiation so thatcolor, rubber, and fabric are not af-fected.

– Remove bird droppings immediately astheir corrosive effect will otherwise at-tack the convertible top and damage therubber seals.

– Hard to remove tree sap or bird drop-pings can be removed from theconvertible top with special tree sap re-mover and a soft brush.

Safety information

NOTICE

Spot remover, paint thinner, solvents, gas-oline or similar can damage theconvertible top or the rubber coating.There is a risk of damage to property. Toremove spots on the convertible top, useonly suitable cleaning agents, for instancespecial convertible top cleaning agent.

Cleaning the convertible topTo remove heavy soiling, especially for lightcolored convertible tops, use a specialconvertible top cleaner.

Proceed as follows when cleaning:

1. Spray the convertible top with theconvertible top cleaner. Follow the man-ufacturer's instructions.

2. Make the convertible top cleaner foamup using a well saturated sponge, mov-ing it in circular motions.

3. Finish washing the vehicle in the carwash or rinse with ample amounts ofwater. Follow notes regarding automaticwashing systems or car washes.

Treat the convertible top with an impreg-nating agent after it has been washed threeto five times.

Suitable cleaning agents and care productsare available from a dealer’s service centeror another qualified service center or repairshop.

Leather careRemove dust from the leather regularly, us-ing a cloth or vacuum cleaner.

Otherwise, particles of dust and road grimechafe in pores and folds, and lead to in-creased wear and premature degradation ofthe leather surface.

Seite 295

Care MOBILITY


To guard against discoloration, such as fromclothing, clean leather and provide leathercare roughly every two months.

Clean light-colored leather more frequentlybecause soiling on such surfaces is substan-tially more visible.

Use leather care products; otherwise, dirtand grease will gradually break down theprotective layer of the leather surface.

Upholstery material care

General informationVacuum the upholstery regularly with avacuum cleaner.

If upholstery is very dirty, for instance withbeverage stains, use a soft sponge or micro-fiber cloth with a suitable interior cleaner.

Clean the upholstery down to the seams us-ing large sweeping motions. Avoid rubbingthe material vigorously.

Safety information

NOTICE

Open Velcro® fasteners on articles ofclothing can damage the seat covers.There is a risk of damage to property. En-sure that any Velcro® fasteners are closed.

Caring for special components

Light-alloy wheelsWhen cleaning the vehicle, use only neutralwheel cleaners having a pH value from 5 to9. Do not use abrasive cleaning agents orsteam jets above 140 ℉/60 ℃. Follow themanufacturer's instructions.

Aggressive, acidic or alkaline cleaningagents can destroy the protective layer ofadjacent components, such as the brakedisc.

After cleaning, apply the brakes briefly todry them. The heat generated during brak-ing dries brake discs and brake pads andprotects them against corrosion.

Chrome surfacesCarefully clean components such as the ra-diator grille or door handles with plenty ofwater, possibly with shampoo added, partic-ularly when they have been exposed to roadsalt.

Rubber componentsEnvironmental influences can cause surfacesoiling of rubber parts and a loss of gloss.Use only water and suitable cleaning agentsfor cleaning.

Treat especially worn rubber parts with rub-ber care agents at regular intervals. Whencleaning rubber seals, do not use any sili-con-containing vehicle care products in or-der to avoid damage or noises.

Fine wood partsClean fine wood facing and fine wood com-ponents only with a moist rag. Then drywith a soft cloth.

Plastic components

NOTICE

Cleansers that contain alcohol or solvents,such as lacquer thinners, heavy-dutygrease removers, fuel, or such, can damageplastic parts. There is a risk of damage toproperty. Clean with a microfiber cloth.Dampen the cloth lightly with water, ifneeded.

Clean with a microfiber cloth.

Dampen the cloth lightly with water, ifneeded.

Seite 296

MOBILITY Care


Safety belts

Warning

Chemical cleansers can destroy the safetybelt webbing. Missing protective effect ofthe safety belts. There is a risk of injuriesor danger to life. Use only a mild soapy sol-ution for cleaning the safety belts.

Dirty belt straps impede the reeling actionand thus have a negative impact on safety.

Use only a mild soapy solution, with thesafety belts clipped into their buckles.

Safety belts should only be allowed to re-tract if they are dry.

Carpets and floor mats

Warning

Objects in the driver's floor area can limitthe pedal distance or block a depressedpedal. There is a risk of accident. Stow ob-jects in the vehicle such that they are se-cured and cannot enter into the driver'sfloor area. Use floor mats that are suitablefor the vehicle and can be safely attachedto the floor. Do not use loose floor matsand do not layer several floor mats. Makesure that there is sufficient clearance forthe pedals. Ensure that the floor mats aresecurely fastened again after they were re-moved, for instance for cleaning.

Floor mats can be removed from the car'sinterior for cleaning.

If the floor carpets are very dirty, clean witha microfiber cloth and water or a textilecleaner. To prevent matting of the carpet,rub back and forth in the direction of travelonly.

Sensor/camera lensesTo clean sensors and camera lenses, use acloth moistened with a small amount ofglass detergent.

Displays/Screens

NOTICE

Chemical cleansers, moisture or fluids ofany kind can damage the surface of dis-plays and screens. There is a risk of dam-age to property. Clean with a clean, anti-static microfiber cloth.

NOTICE

The surface of displays can be damagedwith improper cleaning. There is a risk ofdamage to property. Avoid pressure that istoo high and do not use any scratchingmaterials.

Clean with a clean, antistatic microfibercloth.

Long-term vehicle storageWhen the vehicle is shut down for longerthan three months, special measures mustbe taken. Further information is availablefrom a dealer's service center or anotherqualified service center or repair shop.

Seite 297

Care MOBILITY


Technical data




General information

The technical data and specifications in theOwner's Manual are used as guidance val-ues. The vehicle-specific data can deviatefrom this, for instance due to the selectedspecial equipment, country version or coun-try-specific measurement method. Detailed

values can be found in the approval docu-ments, on labels on the vehicle or can be ob-tained from a dealer’s service center or an-other qualified service center or repairshop.

Dimensions

The dimensions can vary depending on themodel version, equipment or country-spe-cific measurement method.

The specified heights do not take into ac-count attached parts, for instance a roof an-

tenna, roof racks or spoiler. The heights candeviate, for instance due to the selectedspecial equipment, tires, load and chassisversion.

MINI Convertible

Width with mirrors in/mm 76.1/1,932

Width without mirrors in/mm 68/1,727

Height in/mm 55.7/1,415

Length in/mm 151.1-152.5/3,837-3,874

Wheelbase in/mm 98.2/2,495

Smallest turning radius diam. ft/m 35.4/10.8

Seite 298

REFERENCE Technical data


Weights

MINI Cooper Convertible

Approved gross vehicle weight

Manual transmission lbs/kg 3,693/1,675

Steptronic transmission lbs/kg 3,737/1,695

Load

Manual transmission lbs/kg 723/328

Steptronic transmission lbs/kg 710/322

Approved front axle load

Manual transmission lbs/kg 2,017/915

Steptronic transmission lbs/kg 2,072/940

Approved rear axle load



MINI Cooper S Convertible

Approved gross vehicle weight

Manual transmission lbs/kg 3,847/1,745

Steptronic transmission lbs/kg 3,891/1,765

Load

Manual transmission lbs/kg 794/360

Steptronic transmission lbs/kg 800/363

Approved front axle load



Approved rear axle load



Seite 299

Technical data REFERENCE


MINI John Cooper Works Convertible

Approved gross vehicle weight lbs/kg 3,946/1,790

Load lbs/kg 805/365

Approved front axle load lbs/kg 2,172/985

Approved rear axle load lbs/kg 1,819/825

Capacities

MINI Convertible

Fuel tank, approx. US gal/liters 11.6/44.0

Observe further information on fuel quality,refer to page 242.

Seite 300

REFERENCE Technical data


Appendix

Any updates to the Owner's Manual of thevehicle are listed here.

Updates made after the edito-rial deadline

The following chapters were updated in theprinted version of the Owner's Manual afterthe editorial deadline for the IntegratedOwner's Manual in the vehicle had closed:

– Notes: notes: own safety: maintenance.

– Quick Reference Guide: on the road: re-fueling stop: topping up the engine oil.

– Driving tips: observe when driving: driv-ing on a race track.

– Mobility: engine oil: topping up the en-gine oil.

– Mobility: coolant: coolant level.

– Mobility: preventive maintenance: MINImaintenance system.

– Mobility: preventive maintenance: Con-dition Based Service CBS.

– Mobility: preventive maintenance: Main-tenance Manual and Service and War-ranty Information Booklet for US modelsand Warranty and Service Guide Bookletfor Canadian models.

Seite 301

Appendix REFERENCE


License Texts and Certifications

Alarm System

CanadaEQUIPMENT AUTHORIZATION is herebyissued to the named GRANTEE, and isVALID ONLY for the equipment identifiedhereon for use under the Commission'sRules and Regulations listed below.

FCC ID.: P3O001692

Name of Grantee: META System S.p.A.

Equipment Class: Part 15 Low Power Com-munication Device Transmitter

Notes: Microwave Sensor for intrusion andmovement detection

FCC Rule Parts: 15c

Frequency Range (MHZ): 5784.0 - 5784.0

USAFCC ID.: P3O001692

Model: MUW II

This device complies with Part 15 of theFCC rules subject to the following two con-ditions:

1. This device may not cause harmful in-terference.

2. This device must accept all interferencereceived, including interference thatmay cause undesired operation.

Headunit

Brazil

Este equipamento opera em caráter secun-dário, isto é, não tem direito a proteção con-tra interferência prejudicial, mesmo de esta-ções do mesmo tipo, e não pode causarinterferência a sistemas operando emcaráter primário.

Europe

European Union: Declaration ofConformity

Hereby, Alpine Electronics , Inc. declaresthat the radio equipment type BIS01 is incompliance with Directive 2014/53/EU.The full text of the EU declaration of con-formity is avallable at the following internetaddress: http://www.alpine.com/e/research/

Seite 302

REFERENCE License Texts and Certifications


Technical information

Frequency Band: 2.5 GHz

Output Power : 8 dBm

Manufacturer and Address

Manufacturer: Alpine Electronics, Inc.

Address: 20-1, Yoshima Industrial Park,Iwaki, Fukushima 970-1192 Japan

Phone: +81-246-36-4111

БългарскиС настоящото Alpine Electronicsдекларира, че този типрадиосъоръжение BIS01 е всъответствие с Директива 2014/53/ЕС.Цялостният текст на ЕС декларацията засъответствие може да се намери наследния интернет адрес: http://www.alpine.com/e/research/

ČeštinaTímto Alpine Electronics prohlašuje, že typrádiového zařízení BIS01 je v souladu sesměrnicí 2014/53/EU. Úplné znění EUprohlášení o shodě je k dispozici na této in-ternetové adrese: http://www.alpine.com/e/research/

DanskHermed erklærer Alpine Electronics, at radi-oudstyrstypen BIS01 er i overensstemmelsemed direktiv 2014/53/EU. EU-overensstem-melseserklæringens fulde tekst kan findespå følgende internetadresse: http://www.alpine.com/e/research/

DeutschHiermit erklärt Alpine Electronics, dass derFunkanlagentyp BIS01 der Richtlinie2014/53/EU entspricht. Der vollständigeText der EU-Konformitätserklärung ist un-ter der folgenden Internetadresse verfüg-bar: http://www.alpine.com/e/research/

EestiKäesolevaga deklareerib Alpine Electronics,et käesolev raadioseadme tüüp BIS01vastab direktiivi 2014/53/EL nõuetele. ELivastavusdeklaratsiooni täielik tekst on kät-tesaadav järgmisel internetiaadressil:http://www.alpine.com/e/research/

EnglishHereby, Alpine Electronics declares that theradio equipment type BIS01 is in compli-ance with Directive 2014/53/EU. The fulltext of the EU declararation of conformity isavilable at the following internet ad-dress :http://www.alpine.com/e/research/

EspañolPor la presente, Alpine Electronics declaraque el tipo de equipo radioeléctrico BIS01es conforme con la Directiva 2014/53/UE.El texto completo de la declaración UE deconformidad está disponible en la direcciónInternet siguiente: http://www.alpine.com/e/research/

ΕλληνικήΜε την παρούσα ο/η Alpine Electronics,δηλώνει ότι ο ραδιοεξοπλισμός BIS01 πληροίτην οδηγία 2014/53/ΕΕ. Το πλήρες κείμενοτης δήλωσης συμμόρφωσης ΕΕ διατίθεταιστην ακόλουθη ιστοσελίδα στο διαδίκτυο:http://www.alpine.com/e/research/

FrançaisLe soussigné, Alpine Electronics, déclareque l'équipement radioélectrique du typeBIS01 est conforme à la directive2014/53/UE. Le texte complet de la déclara-tion UE de conformité est disponible àl'adresse internet suivante: http://www.alpine.com/e/research/

Seite 303

License Texts and Certifications REFERENCE


HrvatskiAlpine Electronics ovime izjavljuje da jeradijska oprema tipa BIS01 u skladu s Dir-ektivom 2014/53/EU. Cjeloviti tekst EU iz-jave o sukladnosti dostupan je na sljedećojinternetskoj adresi: http://www.alpine.com/e/research/

ÍslenskaHér, Alpine Electronics lýsir yfir að radíó-búnaður gerð BIS01 er í samræmi við tilski-pun 2014/53 / ESB. The fullur texti af ESBdeclararation á samræmi er avilable á eftir-farandi veffangi: http://www.alpine.com/e/research/

ItalianoIl fabbricante, Alpine Electronics , dichiarache il tipo di apparecchiatura radio BIS01 èconforme alla direttiva 2014/53/UE. Il testocompleto della dichiarazione di conformitàUE è disponibile al seguente indirizzo Inter-net: http://www.alpine.com/e/research/

LatviskiAr šo Alpine Electronics deklarē, ka radioie-kārta BIS01 atbilst Direktīvai 2014/53/ES.Pilns ES atbilstības deklarācijas teksts irpieejams šādā interneta vietnē: http://www.alpine.com/e/research/

LietuviųAš, Alpine Electronics, patvirtinu, kad radijoįrenginių tipas BIS01 atitinka Direktyvą2014/53/ES. Visas ES atitikties deklaracijostekstas prieinamas šiuo interneto adresu:http://www.alpine.com/e/research/

NederlandsHierbij verklaar ik, Alpine Electronics, dathet type radioapparatuur BIS01 conform ismet Richtlijn 2014/53/EU. De volledigetekst van de EU-conformiteitsverklaring kanworden geraadpleegd op het volgende inter-

netadres: http://www.alpine.com/e/research/

MaltiB'dan, Alpine Electronics, niddikjara li danit-tip ta' tagħmir tar-radju BIS01 huwa kon-formi mad-Direttiva 2014/53/UE. It-testkollu tad-dikjarazzjoni ta' konformità tal-UEhuwa disponibbli f'dan l-indirizz tal-Internetli ġej: http://www.alpine.com/e/research/

MagyarAlpine Electronics igazolja, hogy a BIS01 tí-pusú rádióberendezés megfelel a2014/53/EU irányelvnek. Az EU-megfelelő-ségi nyilatkozat teljes szövege elérhető akövetkező internetes címen: http://www.alpine.com/e/research/

NorskErklærer herved Alpine Electronics at radio-utstyr typen BIS01 er i samsvar med direk-tiv 2014/53 / EU. Den fullstendige teksten iEU declararation samsvars er avilable påfølgende internettadresse: http://www.alpine.com/e/research/

PolskiAlpine Electronics niniejszym oświadcza, żetyp urządzenia radiowego BIS01 jestzgodny z dyrektywą 2014/53/UE. Pełnytekst deklaracji zgodności UE jest dostępnypod następującym adresem internetowym:http://www.alpine.com/e/research/

PortuguêsO(a) abaixo assinado(a) Alpine Electronicsdeclara que o presente tipo de equipamentode rádio BIS01 está em conformidade com aDiretiva 2014/53/UE. O texto integral dadeclaração de conformidade está disponívelno seguinte endereço de Internet: http://www.alpine.com/e/research/

Seite 304



RomânăPrin prezenta, Alpine Electronics declară cătipul de echipamente radio BIS01 este înconformitate cu Directiva 2014/53/UE.Textul integral al declarației UE de confor-mitate este disponibil la următoarea adresăinternet: http://www.alpine.com/e/research/

SlovenskoAlpine Electronics potrjuje, da je tip radi-jske opreme BIS01 skladen z Direktivo2014/53/EU. Celotno besedilo izjave EU oskladnosti je na voljo na naslednjem splet-nem naslovu: http://www.alpine.com/e/research/

SlovenskýAlpine Electronics týmto vyhlasuje, že rádi-ové zariadenie typu BIS01 je v súlade sosmernicou 2014/53/EÚ. Úplné EÚ vyhláse-nie o zhode je k dispozícii na tejto interne-tovej adrese: http://www.alpine.com/e/research/

SuomiAlpine Electronics vakuuttaa, että radiolai-tetyyppi BIS01 on direktiivin 2014/53/EUmukainen. EU-vaatimustenmukaisuusva-kuutuksen täysimittainen teksti on saata-villa seuraavassa internetosoitteessa:http://www.alpine.com/e/research/

SvenskaHärmed försäkrar Alpine Electronics attdenna typ av radioutrustning BIS01 över-ensstämmer med direktiv 2014/53/EU. Denfullständiga texten till EU-försäkran omöverensstämmelse finns på följande webba-dress: http://www.alpine.com/e/research/

Japan

Mexico

La operación de este equipo está sujeta a lassiguientes dos condiciones:

(1) es posible que este equipo o dispositivono cause interferencia perjudicial y

(2) este equipo o dispositivo debe aceptarcualquier interferencia, incluyendo la quepueda causar su operación no deseada.

Russia, Belarus, Kazakhstan

Диапазон частот: 2.5 ГГц

Излучаемая мощность: 8 дБм

Seite 305



South Korea

해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수없습니다

A 급 기기 (업무용 방송통신기자재)

이 기기는 업무용(A 급) 전자파적합기기로서 판매자

또는 사용자는 이 점을 주의하시기 바라며, 가정외의

지역에서 사용하는 것을 목적으로 합니다.

Taiwan本產品符合低功率電波輻射性電機管理辦法第十二條、第十四條等條文規定

1.

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

Low Power radio frequency electric machi-nery was qualified by Type Approval, notget permission from authority; the company,business or user can’t arbitrarily changefrequency, increase power or modify featureor function of original design.

2.

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Use of low power radio frequency electricmachinery can’t affect flight safety and in-terfere with legal communication; once dis-cover the interfered phenomenon, it shouldstop immediately and improve to no inter-ference and then could continue to use.

The preceding legal communication is radiocommunication which follows Telecommu-nication Act to operate.

Low power radio frequency electric machi-nery must tolerate interference from legalcommunication or electric machinery appa-ratus of industry, science and medical radia-tion.

USA, Canada

USA (FCC) and Canada (IC)Register model name:BIS01

Product code: RB00010A

FCC CAUTIONChanges or modifications not expressly ap-proved by the party responsible for compli-ance could void the user’s authority to oper-ate the equipment. This transmitter mustnot be co-located or operated in conjunctionwith any other antenna or transmitter. Thisdevice complies with part 15 of FCC Rulesand Industry Canada’s licence-exempt RSSs.Operation is subject to the following twoconditions: (1) this device may not causeharmful interference, and (2) this devicemust accept any interference received, in-cluding interference that may cause unde-sired operation.

Le présent appareil est conforme à la partie15 des règles de la FCC et aux normes desCNR d'Industrie Canada applicables aux ap-pareils radio exempts de licence. L'exploita-tion est autorisée aux deux conditions sui-

Seite 306



vantes : (1) l'appareil ne doit pas produire debrouillage, et (2) l'appareil doit accepter toutbrouillage subi, même si le brouillage estsusceptible d'en compromettre le fonc-tionnement.

This equipment complies with FCC/IC radi-ation exposure limits set forth for an uncon-trolled environment and meets the FCCradio frequency (RF) Exposure Guidelinesand RSS-102 of the IC radio frequency (RF)Exposure rules. This equipment has verylow levels of RF energy that is deemed tocomply without maximum permissive expo-sure evaluation (MPE). (產)

Cet équipement est conforme aux limitesd’exposition aux rayonnements énoncéespour un environnement non contrôlé et re-specte les règles les radioélectriques (RF)de la FCC lignes directrices d'exposition etd’exposition aux fréquences radioélectri-ques (RF) CNR-102 de l’IC. Cet équipementémet une énergie RF très faible qui est con-sidérée comme conforme sans évaluation del’exposition maximale autorisée (MPE). (產)

Zambia

Information regarding OpenSource Software Licenses

The “IwIP – A Lightweight TCP/IP stack”included in some products is licensed underthe “BSD licence”. A copy of that license inthe English original version with a copy-

right notice, a disclaimer of warranty, andan exclusion of liability is included below.Copyright (c) 2001-2004 Swedish Instituteof Computer Science. All rights reserved.Redistribution and use in source and binaryforms, with or without modification, arepermitted provided that the following condi-tions are met: 1. Redistributions of sourcecode must retain the above copyright no-tice, this list of conditions and the followingdisclaimer. 2. Redistributions in binary formmust reproduce the above copyright notice,this list of conditions and the following dis-claimer in the documentation and/or othermaterials provided with the distribution. 3.The name of the author may not be used toendorse or promote products derived fromthis software without specific prior writtenpermission. THIS SOFTWARE IS PRO-VIDED BY THE AUTHOR ``AS IS`` AND ANYEXPRESS OR IMPLIED WARRANTIES, IN-CLUDING, BUT NOT LIMITED TO, THE IM-PLIED WARRANTIES OF MERCHANTA-BILITY AND FITNESS FOR A PARTICULARPURPOSE ARE DISCLAIMED. IN NOEVENT SHALL THE AUTHOR BE LIABLEFOR ANY DIRECT, INDIRECT, INCIDEN-TAL, SPECIAL, EXEMPLARY, OR CONSE-QUENTIAL DAMAGES (INCLUDING, BUTNOT LIMITED TO, PROCUREMENT OFSUBSTITUTE GOODS OR SERVICES; LOSSOF USE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED ANDON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABIL-ITY, OR TORT (INCLUDING NEGLIGENCEOR OTHERWISE) ARISING IN ANY WAYOUT OF THE USE OF THIS SOFTWARE,EVEN IF ADVISED OF THE POSSIBILITYOF SUCH DAMAGE.

Seite 307



Remote Control

Mexico

COFETEL: RLVBHEID13–0912

IFETEL: RLVBHEID18-1287

Marca: Hella

Modelo (s): IDGNG1

La operación de este equipo está sujeta a lassiguientes dos condiciones:



USA/CanadaFCC ID:NBGIDGNG1

FCC ID NBG-IDNGN1M

FCC § 15.19 Labelling requirements

This device complies with Part 15 of theFCC Rules and with Industry Canada li-cence-exempt RSS. Operation is subject tothe following two conditions:

(1) This device may not cause harmful inter-ference, and

(2) this device must accept any interferencereceived, including interference that maycause undesired operation.

FCC § 15.21 Information to user

Changes or modifications not expressly ap-proved by the party responsible for compli-

ance could void the user's authority to oper-ate the equipment.

IC: 2694A-IDGNG1

IC: 2694A-IDGNG1

Le présent appareil est conforme aux CNRd'Industrie Canada applicables aux appareilsradio exempts de licence. L'exploitation estautorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouil-lage, et

(2) l'utilisateur de l'appareil doit acceptertout brouillage radioélectrique subi, mêmesi le brouillage est susceptible d'en compro-mettre le fonctionnement.

FCC § 15.19 Labelling requirements

This device complies with Part 15 of theFCC Rules and with Industry Canada li-cence-exempt RSS. Operation is subject tothe following two conditions:



FCC § 15.21 Information to user

Changes or modifications not expressly ap-proved by the party responsible for compli-ance could void the user's authority to oper-ate the equipment.

Tire Pressure Monitoring Sys-tem

CanadaIC: 7812D-TIS07

Operation is subject to the following twoconditions:

(1) this device may not cause harmful inter-ference, and

Seite 308




USAFCC ID: KR5TIS-07

This device complies with Part 15 of theFCC Rules. Operation is subject to the fol-lowing two conditions:



Transmitter/Receiver

MexicoIFETEL: RLVCOA213-1447

A2C35029700

Continental Automotive GmbH

Siemensstrasse 12

93055 Regensburg

Germany

Para su uso en México, la operación de esteequipo está sujeta a las siguientes dos con-diciones:



Canada/USAModel: A2C35029700

IC: 7812D-35029700

This device complies with Industry Canadalicense-exempt RSS standard(s). Operationis subject to the following two conditions:



Le présent appareil est conforme aux CNRd'Industrie Canada applicables aux appareilsradio exempts de licence. L'exploitation estautorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouil-lage, et

(2) l'utilisateur de l'appareil doit acceptertout brouillage radioélectrique subi, mêmesi le brouillage est susceptible d'en compro-mettre le fonctionnement.

Model: A2C35029700

FCC ID:KR5A2C35029700

This device complies with Part 15 of theFCC Rules. Operation is subject to the fol-lowing two conditions:



Seite 309



Everything from A to Z

Index

A

ABS Antilock Braking System 153 Acceleration Assistant, see Launch Con-

trol 107 Accessories and parts 10 ACC, see Camera-based cruise control 158 Activated-charcoal filter 184 Activation times, parked-car ventila-

tion 186 Active Cruise Control, see Camera-based

cruise control 158 Active Guard, see Intelligent Safety 144 Adaptive brake lights, see Brake force dis-

play 151 Adaptive chassis 155 Additives, engine oil types 270 Adjusting menu contents, Central Informa-

tion Display (CID) 40 Adjustments, steering wheel 80 Airbags 132 Airbags, indicator and warning light 134 Air circulation, see Recirculated-air

mode 180, 183 Air conditioner 179 Air conditioning, climate 180, 182 Air distribution, manual 180, 184 Air drying, see Air conditioning 180, 182 Air flow, air conditioner 180 Air flow, automatic climate control 184 Air pressure, tires 244 Air vents, see Ventilation 185 Alarm system 63 Alarm triggering 63 Alarm, unintentional 64 All around the interior mirror 35 All-season tires, see Winter tires 252 Always Open Timer, Control Display 124 Always Open Timer, Onboard Com-

puter 121

AM/FM station 220 Antifreeze, washer fluid 99 Antilock Braking System ABS 153 Anti-slip control, see DSC 153 Anti-theft protection, lug bolts 260 Approach control warning with city light

braking function 145 Approved axle load 299 Ash tray 192 Assistance when driving off 156 Assistance with breakdown 285 Audio 228 Audio playback, Bluetooth 228 Audio playback, pause 216 AUTO intensity 183 Automatic climate control 181 Automatic Curb Monitor, exterior mir-

ror 79 Automatic deactivation, front-seat passen-

ger airbags 134 Automatic headlight control 127 Automatic locking 62 Automatic Service Request 236 Automatic transmission with Step-

tronic 101 Automatic unlocking 63 Automatic vehicle wash 293 AUTO program, automatic climate con-

trol 183 AUTO program, intensity 183 Auto Start/Stop function 89 Auto washing 293 Average consumption 120 Average speed 120 Axle loads, weights 299

B

Backrest curvature, see Lumbar support 73 Backrest, seats 72

Seite 310

REFERENCE Everything from A to Z


Balance, sound settings 218 Band-aids, see First-aid kit 285 Bass, sound settings 218 Battery, disposing of 283 Battery Guard, Teleservice 237 Battery, vehicle 282 Being towed, see Tow-starting and tow-

ing 289 Belts, safety belts 74 Beverage holder, cup holder 197 Bluetooth audio 228 Bluetooth connection 46 Bonus range, GREEN Mode 212 Bottle holder, see Cup holder 197 Brake assistant 153 Brake discs, break-in 204 Brake force display 151 Brake lights, brake force display 151 Brake pads, break-in 204 Braking, information 206 Breakdown assistance 285 Breakdown, Flat Tire Monitor TPM 141 Breaking in 204 Brightness of Control Display 43 Bulb replacement 277 Bulb replacement, front 278, 279 Bulb replacement, rear 279 Bulb replacement, side 281 Bulbs and lights 277 Button, SOS 286 Button, Start/Stop 86 Bypassing, see Jump-starting 287

C

California Proposition 65 Warning 10 Camera-based assistance systems, see Intel-

ligent Safety 144 Camera-based cruise control 158 Camera lenses, care 297 Camera, rearview camera 170 Can holder, see Cup holder 197 Care, displays 297 Care, light-alloy wheels 296 Care, vehicle 294 Care, washing the vehicle 293

Cargo area 198 Cargo area, enlarging 200 Cargo area, loading 198 Cargo area partition 201 Cargo area, storage compartments 200 Cargo, stowing and securing 198 Cargo straps 200 Carpet, care 297 Catalytic converter, see Hot exhaust gas

system 205 CBS Condition Based Service 274 Center armrest 196 Center console 34 Central Information Display (CID) 36 Central Information Display (CID), see Con-

trol Display 37 Central instrument cluster, LED ring 123 Central locking system, unlocking, from in-

side 58 Central screen, see Control Display 37 Changes, technical, see For Your Own

Safety 9 Changing parts 276 Changing wheels 258 Changing, wheels and tires 251 Chassis number, see Vehicle identification

number 15 Check Control 110 Checking the oil level electronically 268 Check oil level 268 Children, seating position 82 Children, transporting safely 82 Child restraint system 82 Child restraint system LATCH 85 Child restraint systems, mounting 83 Child seat, mounting 83 Child seats 82 Chrome parts, care 296 Cigarette lighter 192 Cleaning, displays 297 Clearance, water 206 Climate control 179, 181 Coasting 213 Coasting with engine decoupled, coast-

ing 213 Coasting with idling engine 213

Seite 311

Everything from A to Z REFERENCE


Combination switch, see Turn signals 92 Combi switch, see Wiper system 93, 96 Comfort Access 58 Comfort entry 53 Communication 232 Compartments in the doors 196 Compass 190 Compatible devices, see Suitable devi-

ces 46 Compressor 254 Computer, see Onboard Computer 119 Condensation on windows 184 Condensation under the vehicle 207 Condition Based Service CBS 274 Conference, see Calls with multiple par-

ties 233 Configuring driving program 156 Confirmation signal 63 Connecting device 45 Connecting electrical devices, see Sock-

ets 193 Connections 45 Consumption, see Average consump-

tion 120 Consumption, see Current consump-

tion 116 Contacts 234 Continued driving with a flat tire 140, 143 Control Display 37 Controller 38 Control systems, driving stability 153 Convenient closing with the vehicle key 54 Convenient opening 53 Convertible, convertible top 67 Convertible mode, automatic climate con-

trol 183 Convertible program, automatic climate

control 183 Convertible, roof 67 Convertible top 67 Convertible top, care 295 Convertible top, cargo area partition 70 Convertible top, rollover protection sys-

tem 136 Cooling, maximum 182 Cornering light 128

Corrosion on brake discs 207 Cosmetic mirror 192 Coupling, see Pairing 45 Courtesy lights during unlocking 53 Courtesy lights with the vehicle locked 54 Cruise control 164 Cruise control, active 158 Cruise control with distance control, see

Camera-based cruise control 158 Cruise control without distance control, see

Cruise control 164 Cruising range 115 Cup holder 197 Current consumption 116 Customer support 238

D

Damage, tires 250 Dashboard 192 Data memory 11 Data protection, settings 45 Data, technical 298 Date 42 Date, display 115 Daytime pedestrian collision mitiga-

tion 148 Daytime running lights 128 DCC, see Cruise control 164 Decorative trim 192 Defrosting, see Defrosting the win-

dows 181 Defrosting, see Windows, defrosting 184 Defrosting the windows 181 Deleting personal data 45 Deletion of personal data 45 Device list 45 Digital clock 115 Digital compass 190 Digital radio, see HD Radio reception 221 Dimensions 298 Dimmable exterior mirrors 79 Dimmable interior mirror 80 Direction indicator, see Turn signals 92 Display, date 115 Display, electronic, instrument cluster 110

Seite 312



Display, engine temperature 121 Display, GREEN Mode 210 Display, iDrive 36 Display lighting, see Instrument light-

ing 130 Displays 109 Displays, care 297 Disposal, coolant 273 Disposal, vehicle battery 283 Distance control, see PDC 166 Drive-off assistant 156 Drive-off assistant, see DSC 153 Driver assistance, see Intelligent

Safety 144 Driver profiles 61 Driving Dynamics Control, see MINI Driv-

ing Modes switch 155 Driving Excitement, SPORT 122 Driving instructions, breaking in 204 Driving mode, GREEN 210 Driving modes 155 Driving notes, general 205 Driving notes, things to remember when

driving 204 Driving on racetracks 208 Driving stability control systems 153 Driving through water 206 Driving tip, GREEN tip 212 Driving tips 205 DSC Dynamic Stability Control 153 DTC Dynamic Traction Control 154 Dynamic damping, see Adaptive chas-

sis 155 Dynamic Stability Control DSC 153 Dynamic Traction Control DTC 154

E

Easy-Load function, see Loading aid 199 Electronic displays, instrument cluster 110 Electronic oil measurement 268 Electronic Stability Program ESP, see

DSC 153 Emergency Request 286 Emergency service, see MINI Roadside As-

sistance 285

Emergency unlocking, fuel filler flap 241 Emergency unlocking, transmission

lock 107 Emergency unlocking, trunk lid 61 Emergency wheel, compact wheel, see

Emergency wheel 263 Energy control 116 Engine, automatic Start/Stop function 89 Engine, automatic switch-off 89 Engine compartment 265 Engine compartment, working in 266 Engine coolant 272 Engine idling when driving, coasting 213 Engine oil 268 Engine oil, adding 269 Engine oil change 271 Engine oil filler neck 269 Engine oil types to add 270 Engine start, see Jump-starting 287 Engine start, see Starting the engine 87 Engine stop 88 Engine temperature, display 121 Entering a vehicle wash 293 Entertainment, control elements 216 Entertainment source, changing 216 Equipment, interior 187 Error displays, see Check Control 110 ESP Electronic Stability Program, see

DSC 153 Exchanging, wheels and tires 251 Exhaust gas system 205 Exiting a vehicle wash 293 Expanding the cargo area volume 201 Exterior mirror, Automatic Curb Moni-

tor 79 Exterior mirror, automatic dimming fea-

ture 79 Exterior mirrors 78 Exterior mirrors, malfunction 79 External start 287 External temperature display 115 External temperature warning 115 Eyes for securing cargo 200

Seite 313



F

Fader, sound settings 218 Failure message, see Check Control 110 False alarm, see Unintentional alarm 64 Fan, see Air flow 180, 184 Fastening safety belts, see Safety belts 74 Filler neck for engine oil 269 Filter, see Microfilter 181 Filter, see Microfilter/activated-charcoal fil-

ter 184 Fine wood, care 296 First-aid kit 285 Flat tire, changing wheels 258 Flat Tire Monitor TPM 141 Flat tire, repairing 253 Flat tire, Tire Pressure Monitor TPM 137 Flat tire, warning light 138, 142 Flooding, driving through 206 Floor carpet, care 297 Floor mats, care 297 FM/AM station 220 Fogged up windows 181 Fold-away position, windshield wip-

ers 95, 98 Foot brake 206 For Your Own Safety 9 Front airbags 132 Front fog lights 129 Front fog lights, LED, bulb replace-

ment 279 Front-seat passenger airbags, automatic de-

activation 134 Front-seat passenger airbags, indicator

light 135 Front seats 72 Fuel 242 Fuel cap 240 Fuel filler flap 240 Fuel filler flap, emergency unlocking 241 Fuel gauge 114 Fuel quality 242 Fuel recommendation 242 Fuel, tank capacity 300 Fuse 283

G

Garage door opener, see Integrated Univer-sal Remote Control 187

Gasoline 242 Gear shift indicator 117 General driving notes 205 General settings 42 Glare shield 192 Glove compartment 195 Gong, volume equalization 218 GPS geolocation, vehicle position 43 GREEN bonus range 212 GREEN Mode 210 GREEN - program, driving dynamics 155 GREEN tip, driving tip 212 Gross vehicle weight, approved 299 Ground clearance 207

H

Halogen headlights 278 Handbrake, see Parking brake 91 Hand-held transmitter, alternating

code 188 Hands-free system 234 Hazard warning flashers 285 HD Radio 221 Headlight control, automatic 127 Headlight flasher 93 Headlight glass 278 Headlights, care 294 Head restraints and seats 72 Head restraints, front 76 Head restraints, rear 77 Heavy cargo, stowing cargo 198 High-beam Assistant 128 High beams 93 High beams/low beams, see High-beam As-

sistant 128 Hills 207 Hill start assistant, see Drive-off assis-

tant 156 Holder for beverages 197

Seite 314



HomeLink, see Integrated Universal RemoteControl 187

Homepage, see Internet 8 Hood 266 Horn 32 Hot exhaust gas system 205 Hotline, see Customer support 238 Hydroplaning 206

I

Ice warning, see External temperaturewarning 115

Icy roads, see External temperature warn-ing 115

Identification marks, tires 248 Identification number, see Vehicle identifi-

cation number 15 Ignition off 86 Ignition on 86 Illuminated ring, central instrument clus-

ter 123 Indication of a flat tire 138, 142 Indicator and warning lights, see Check

Control 110 Indicator light, see Check Control 110 Individual air distribution 180, 184 Individual settings, see Driver profiles 61 Inflation pressure, tires 244 Inflation pressure warning, tires 141 Info Display 110 Information 8 Initialize, Tire Pressure Monitor TPM 137 Initializing, Flat Tire Monitor FTM 142 Input, iDrive 36 Instrument cluster 109 Instrument cluster, electronic displays 110 Instrument lighting 130 Integrated key 57 Integrated Universal Remote Control 187 Intelligent emergency call 286 Intelligent Safety 144 Intended use 9 Intensity, AUTO program 183 Interior equipment 187 Interior lights 130

Interior lights during unlocking 53 Interior lights with the vehicle locked 54 Interior mirror 35, 78 Interior mirror, automatic dimming fea-

ture 80 Interior mirror, compass 190 Interior mirror, manually dimmable 80 Interior motion sensor 64 Internet site 8 Interval display, service notifications 116 Interval mode 94, 97 In the vicinity of the center console 34 In the vicinity of the steering wheel 32 iPod/iPhone 228

J

Jacking points for the vehicle jack 261 Jam protection system, windows 66 Jump-starting 287

K

Keyless Go, see Comfort Access 58 Key, see Integrated key 57 Key, see Vehicle key 52 Kickdown, Steptronic transmission 104 Knee airbag 133

L

Label on recommended tires 252 Label, runflat tires 253 Language, set on Control Display 42 Lashing eyes 200 LATCH child restraint fixing system 85 Launch Control 107 Leather care 295 LED ring, central instrument cluster 123 LEDs, light-emitting diodes 277 Letters and numbers, entering 36 Light 126 Light-alloy wheels, care 296 Light-emitting diodes, LEDs 277 Lighter 192

Seite 315



Lighting 126 Light replacement 277 Light replacement, front 278, 279 Light replacement, rear 279 Light replacement, side 281 Lights and bulbs 277 Light switch 126 List of all messages 44 Load 199 Loading 198 Loading aid 199 Location, vehicle position 43 Locking, automatic 62 Locking, from inside 58 Locking, see Opening and Closing 52 Locking, settings 62 Low beams 126 Low beams, automatic, see High-beam As-

sistant 128 Lower back support, mechanical 73 Lug bolt lock 260 Lumbar support, mechanical 73

M

Maintenance 274 Maintenance requirements 274 Maintenance, service notifications 116 Maintenance system, MINI 274 Make-up mirror 192 Malfunction displays, see Check Con-

trol 110 Manual air flow 180 Manual control, air distribution 180, 184 Manual control, air flow 184 Manual mode, transmission 105 Manual operation, PDC Park Distance Con-

trol 168 Manual operation, rearview camera 170 Manual transmission 100 Manufacturer of the MINI 9 Matt paint, care 295 Maximum cooling 182 Maximum speed display, see Speed Limit

Info 118 Maximum speed, winter tires 252

Measuring units 43 Mechanical key 57 Media of the Owner's Manual 51 Medical kit 285 Menu in instrument cluster 119 Menus, Central Information Display

(CID) 39 Messages 44 Messages, see Check Control 110 Microfilter 181, 184 Microphone, muting 233 MID - program, driving dynamics 155 MINI driving modes 155 MINI logo projection during unlocking 53 MINI maintenance system 274 Minimum tread, tires 250 MINI Roadside Assistance 285 MINI Teleservices 236 Mirrors 78 Mobile communication devices in the vehi-

cle 205 Mobile phone 232 Mobile phone, connecting 45 Mobile phone, operation 232 Mobile Service, see MINI Roadside Assis-

tance 285 Mobility System 254 Modifications, technical, see For Your Own

Safety 9 Moisture in headlight 278 Monitor, see Control Display 37 Mounting of child restraint systems 83 MP3 player, see Audio 228 Multifunction steering wheel, buttons 32

N

Neck restraints, front, see Head restraintsfront 76

Neck restraints, rear, see Head restraintsrear 77

Neutral cleaner, see Light-alloy rims 296 New wheels and tires 251

Seite 316



O

OBD Onboard Diagnosis 275 Obstacle marking, rearview camera 172 Octane rating, see Recommended fuel

grade 243 Odometer 114 Oil 268 Oil, adding 269 Oil change 271 Oil filler neck 269 Oil service interval, service notifica-

tions 116 Oil types to add, engine 270 Onboard Computer 119 Onboard Diagnosis OBD 275 Onboard literature, printed 51 Onboard vehicle tool kit 276 On-call service, see MINI Roadside Assis-

tance 285 Opening and Closing 52 Opening, from inside 58 Operating concept Central Information Dis-

play (CID) operating concept 36 Operating menus, Central Information Dis-

play (CID) 36 Operation via the Controller 39 Optional equipment 9 Owner's Manual, printed 51

P

Paint, car care 294 Panic alarm, see Panic mode 64 Panic mode 64 Parallel parking assistant 173 Park Distance Control PDC 166 Parked-car ventilation 185 Parked vehicle, condensation 207 Parking aid, see PDC 166 Parking assistant 173 Parking brake 91 Parking lights 126 Parts and accessories 10

Passenger's side exterior mirror, tilt down,see Automatic Curb Monitor 79

Pathway lighting 127 Pathway lines, rearview camera 171 Pause, audio playback 216 PDC Park Distance Control 166 Performance Control 155 Personal profile, see Driver profiles 61 Phone conference, see Calls with multiple

parties 233 Phone, connecting 45 Plastic, care 296 PostCrash - iBrake 152 Power failure 283 Power windows 65 Pressure, tires 244 Pressure warning, tires 141 Printed onboard literature 51 Profiles, see Driver profiles 61 Programmable memory buttons, Central In-

formation Display (CID) 41 Protective function, windows 66 Push-and-turn reel, see Controller 38

R

Racetrack operation 208 Radio 220 Radio, adjusting the volume 216 Radio, control elements 216 Radio Data System RDS 220 Radio, muting 216 Radio-ready state 87 Radio, tone settings 218 Rain sensor 94, 97 Ratchet straps 200 RDS Radio Data System 220 Rear lights 279 Rear luggage rack 207 Rear seat backrests, folding down 200 Rearview camera 170 Rear-view mirrors, exterior 78 Rear window defroster 181, 184 Recirculated-air filter 184 Recirculated-air mode 180, 183 Recommended fuel grade 243

Seite 317



Recommended tire brands 252 Refueling 240 Remaining range 115 Remote control, universal 187 Replacing parts 276 Replacing the battery, vehicle key 55 Replacing, wheels and tires 251 Reporting safety malfunctions 15 RES CNCL button, camera-based cruise con-

trol 158 RES CNCL button, Cruise Control 164 Reserve warning, see Range 115 Reset, Tire Pressure Monitor TPM 137 Retreaded tires 252 Roadside parking lights 127 Rolling code hand-held transmitter 188 Rollover protection system 136 RON recommended fuel grade 243 Roof, see Convertible top 67 RSC Runflat System Component, see Runflat

tires 253 Rubber components, care 296 Runflat tires 253

S

Safe braking 206 Safety belt reminder for driver's seat and

front passenger seat 76 Safety belts 74 Safety belts, care 297 Safety belts, rear 76 Safety systems, airbags 132 Satellite radio 222 Saving fuel 209 Screens, care 297 Screen, see Control Display 37 Screwdriver 276 Sealant, see Mobility System 254 Seat heating, front 74 Seating position for children 82 Seats and head restraints 72 Seats, front 72 Securing cargo 198 Selection list in instrument cluster 119 Sensors, care 297

Service and warranty 11 Service Center, see MINI Roadside Assis-

tance 285 Service notifications, display 116 Service Request 237 Service requirements, Condition Based

Service CBS 274 Servotronic 156 SET button, camera-based cruise con-

trol 158 SET button, Cruise Control 164 Settings, general 42 Settings, locking/unlocking 62 Settings, mirrors 78 Settings, seats and head restraints 72 Shift paddles on the steering wheel 106 Side airbag 132 Signaling, horn 32 Signals when unlocking 63 Sitting safely 72 Sizes, see Dimensions 298 Smartphone, connecting 45 Smartphone, operation 232 Snow chains 258 Socket, OBD Onboard Diagnosis 275 Sockets, electrical devices 193 SOS button 286 Sound output 216 Source, changing, see Entertainment

source, changing 216 Spare tire, see Emergency wheel 263 Speed, average 120 Speed limit display, see Speed Limit

Info 118 Speed Limit Info 118 Speed Limit Info, Onboard Computer 121 Speed Volume, volume equalization 218 Speed warning 123 Sport displays 122 SPORT program, driving dynamics 156 Sport program, transmission 104 Stability control systems 153 Standard equipment 9 Start/stop, automatic function 89 Start/Stop button 86 Starting the engine 87

Seite 318



Station, AM/FM 220 Station, renaming 221 Stations, stored 227 Station, storing 220 Status information, Central Information Dis-

play (CID) 37 Status of Owner's Manual 9 Status, vehicle 125 Steering assistance 156 Steering column adjustment 80 Steering wheel, adjusting 80 Steptronic Sport transmission, see Step-

tronic transmission 101 Steptronic Sport transmission with double

clutch, see Steptronic transmission 101 Steptronic transmission 101 Steptronic transmission with double clutch,

see Steptronic transmission 101 Stopping the engine 88 Storage compartments 195 Storage, tires 253 Storing the vehicle 297 Stowing and securing cargo 198 Suitable devices 46 Suitable mobile phones 46 Summer tires, tread 250 Sun visor 192 Supplementary Owner's Manuals 51 Supplementary text message 114 Switch for driving dynamics 155 Switching calls, see Calls with multiple par-

ties 233 Switch, see Cockpit 32 Symbols 8

T

Tachometer 114 Tail lights 279 Technical changes, see For Your Own

Safety 9 Technical data 298 Telephone 232 Telephone conference, see Calls with multi-

ple parties 233 Telephone, operation 232

Teleservice Battery Guard 237 Teleservice Report 237 Teleservices 236 Temperature, air conditioner 179 Temperature, automatic climate con-

trol 182 Temperature display for external tempera-

ture 115 Temperature, engine 121 Terminal, starting aid 288 Text message, see Check Control mes-

sages 114 Theft alarm system, see Alarm system 63 Thigh support 73 Tilt alarm sensor 64 Tilt down, passenger's side exterior mirror,

see Automatic Curb Monitor 79 Time 42 Tire damage 250 Tire identification marks 248 Tire inflation pressure 244 Tire inflation pressure monitoring, see

TPM 141 Tire pressure 244 Tire Pressure Monitor TPM 137 Tire repair kit, see Mobility System 254 Tires 244 Tires, changing 251 Tire sealant, see Mobility System 254 Tires, runflat 253 Tire tread 250 Tone 218 Tools 276 Total vehicle weight 299 Towing 289 Tow-starting 289 TPM Flat Tire Monitor 141 TPM Tire Pressure Monitor 137 Traction control 154 TRACTION, see Dynamic Traction Control,

DTC 154 Transmission lock, electronic unlock-

ing 107 Transmission lock, releasing manually 106 Transmission, manual transmission 100

Seite 319



Transmission, see Steptronic transmis-sion 101

Transporting children safely 82 Tread, tires 250 Treble, sound settings 218 Trip computer 122 Triple turn signal activation 92 Trip odometer 114 Trip recorder, see Trip odometer 114 Trunk, cargo area partition 201 Trunk, emergency unlocking 61 Trunk lid 60 Trunk lid, emergency unlocking 61 Trunk lid via vehicle key 54 Trunk, see Cargo area 198 Turning radius lines, rearview camera 171 Turn signal, front 278, 279 Turn signal, indicator light 113 Turn signal, side 281 Turn signals, operation 92 Turn signals, rear, bulb replacement 279

U

Unintentional alarm 64 Units, see Measuring units 43 Universal remote control 187 Unlocking, automatic 63 Unlocking, see Opening and Closing 52 Unlocking, settings 62 Updates made after the editorial deadline 9 Upholstery care 296 USB connection 48 USB port, position in vehicle 194 USB storage device 228 Used battery, disposing of 283 Use, intended 9

V

Vanity mirror 192 Vehicle battery 282 Vehicle breakdown, see Breakdown assis-

tance 285 Vehicle, breaking in 204

Vehicle care 294 Vehicle care products 294 Vehicle features and options 9 Vehicle identification number 15 Vehicle jack 261 Vehicle key, additional 55 Vehicle key, loss 55 Vehicle key, malfunction 56 Vehicle key, opening/closing 52 Vehicle key, replacing the battery 55 Vehicle key, see Vehicle key 52 Vehicle paint, care 294 Vehicle position, vehicle location 43 Vehicle status 125 Vehicle storage 297 Vehicle wash 293 Vehicle wash, automatic 293 Vehicle, washing 293 Ventilation 185 Ventilation, see Parked-car ventilation 185 VIN, see Vehicle identification number 15 Voice command response, smartphone 235 Volume equalization 218

W

Warning and indicator lights, see CheckControl 110

Warning displays, see Check Control 110 Warning messages, see Check Control 110 Warning triangle 285 Warranty 9 Washer fluid 99 Washer nozzles, windshield 95, 98 Washing the vehicle 293 Water on roads 206 Weights 299 Welcome lights 127 Welcome lights during unlocking 53 Wheel base, vehicle 298 Wheels 244 Wheels, changing 251 Wheels, Tire Pressure Monitor TPM 137 Wind deflector 70 Windows, powered 65 Windshield cleaning system 93, 96

Seite 320



Windshield defroster 181, 184 Windshield washer fluid 99 Windshield washer nozzles 95, 98 Windshield wipers, fold-away posi-

tion 95, 98 Windshield wipers, see Wiper sys-

tem 93, 96 Winter storage, care 297 Winter tires, suitable tires 252 Winter tires, tread 250 Wiper blades, replacing 276 Wiper fluid 99 Wiper system 93, 96 Wood, care 296 Word match concept, navigation 36 Wrench 276

Y

Your dealer's service center 237

Seite 321



01405A02757 ue

*BL5A0275700K*

California Proposition 65Warning

For vehicles sold in California:


MINI MOTORER'S GUIDE APP.

Your customized information about the vehicle in an app.Optimized for smartphones & tablets. Can be used offline.

01405A02757 ue

*BL5A0275700K*


Documents

MINI CONVERTIBLE. OWNER'S MANUAL. · help protect the environment. "..." Control Display texts used to select individual functions. Action steps Action steps to be carried out are