Upload
microdia-sa-switzerland
View
428
Download
11
Embed Size (px)
DESCRIPTION
Microdia has acquired a large experience in the field of high temperature corrosion resistant cross heads. Fixed center cross heads single & double layer range up to 50 mm die diameter.
Citation preview
www.microdia.ch Your expert in extrusion
SWISS MADE
°microdia
°microdia
N EWSLETTER N O 28 Often copied
Never equaled
M I D S I Z E M F 9 0 0 0 S E R I E S
Head type MF 9000-10 H MF 9000-20 H MF 9000- 50 H
Configuration SL
single layer
SLS
skin or stripe
SL single
layer
SLS
skin or stripe
SLS
skin only
SL
single layer
Min core diam. 0.1 0.1 0.2 0.2 0.2 0.5
Max core diam. 6 6 11 11 11 30
Max die opening 22 12 22 22 35 50
microdia’s original square shape with integrated long life span heating cartridges.
strong and extremely stable, customizable to suit every particular need.
microdia MF 9000 H head’s cross section
SL single layer
configuration
SLS skin or stripe
configuration. Single layer can also be extruded with a
blank distribution
sleeve or collet. >>>
MF 9000–20 SLS H double layer or stripe
MF 9000–10 SLS H double layer or stripe
MF 9000–50 SLS H single layer
microdia fluoropolymer cross head
www.microdia.ch Your expert in extrusion
SWISS MADE
°microdia
°microdia
Newsle t ter No 28 Page 2
Microdia presents its new romex concept based
fluoropolymer cross head: romex 20 SL H
round microdia extrusion
Main features:
1.- Compact design. 2.- Three heating zones: head, die, tip. 3.– Vacuum pump fitting. 4.- Fast tool change. 5.- Harting power plugs. 6.- Microflex option. 7.-Maximum die opening 20 mm.
microflex [Mflex]
microdia’s original
feature refers to a
fixed center cross head with manual centering fine tuning . romex 20 Mflex SL H
with professional power plugs
Head type romex 20 H (all types)
Configuration SL single layer
Min core diam. 0.1
Max core diam. 11
Max die opening 22 romex 20 SL H fixed center
cross section
romex 20 SL H front view
romex 20 Mflex SL H material entry view
Round cross head shape made it possible for a substan-tial savings on the expensive head block’s material, re-flecting in a competitive price for a top quality flluoropo-lymer cross head.
New fluoropolymer cross head
microdia romex 20 SL H
www.microdia.ch Your expert in extrusion
SWISS MADE
°microdia
°microdia
Page 3 Newsle t ter No 28
Tubing tool Draw Ratio Balance factor
Ideal tubing extrusion conditions are satisfied when the proportions of die opening and hot insulation cross section are identical.
In that case the DRB is equal to 1
DRB
In the practice, tooling is often dimensioned according to the cold insu-lation overall diameter.
In order to compensate the error induced by the difference between hot and old diameter, the DRB value has to be slightly increased.
Example:
Core Ø 1 mm
Cold insulation Ø 2 mm
Hot insulation Ø 2.197 mm
Tip Ø 8.85 mm
Die Ø 19.45 mm
DRBcold is not randomly selected but calculated, it depends directly on the difference between hot and cold diameter i.e. on the shrinkage along the cooling trough.
www.microdia.ch Your expert in extrusion
SWISS MADE
°microdia
°microdia
Newsletter No 28 Page 4
Switzer land Head Of f i ce
m ic ro d ia SA Prés du Lac 69bis 1400 Yverdon les Bains
Tel: +41 24 447 3500 Fax: +41 24 445 1228
[email protected] www.microdia.ch
USA microdia USA P.O.Box 1419
Pawcatuck CT 06379
Alban Adams Director 1-860-495-5788 (phone)
1-401-688-6731 (mobile)
Stephanie Chasseloup
Sales assistant
Microdia Head Office
+ 41 24 4473510
Japan
T.Fukase & Co., Ltd.
Sole agent of microdia in
Japan
2-10-10 Makuhari Hongo Hanamigawa-Ku,
Chiba, Japan 262-0033
Tel: +81-43-276-0630 Fax: +81-43-276-0463 [email protected]
http://www.fukase.co.jp
microdia USA PO Box 1419 Pawcatuck
CT 06379.
Personal:
Alban Adams Director North.American sales (English, French)
Jose Noriega Sales Manager Latin America (English,Spanish,French)
Jean Daniel Steiner Extrusion specialist (English, German, French)
Atlanta Interwire 2013
As usual microdia was present
at Interwire. Four fully functio-nal cross heads selected among the best sellers of its large program could be seen on the booth and attracted the
attention of many visitors.
ecomex 20 with qcc: Quick
color change cross head de-signed to extruder technologi-c a l p o l y m e r s ,
like TPU, TPE, Biopolymers etc.
ecomex 20 TH: Thermostatic
fluid heat/cool temperature control cross head created for HFFR and heat sensitive com-
pounds extrusion.
MF 9000 07 TL : Triple layer
cross head to extrude mini skin-foam-skin, multilayer mini
tubes, etc.
microdia’s original avantis 20 FO is
the ideal solution for optical fiber
buffering with jelly injection.
X-Y high precision injection needle fitting, allows easy balancing of
the jelly flow even during the run.
A sliding cart holds the dual micro tube jelly injection module; it can be tilted during tooling prepara-
tion and head cleaning.
microdia USA Mr Alban Adams Director
North.American sales