Upload
trinhthien
View
212
Download
0
Embed Size (px)
Citation preview
2
For all applications: stubble work, primary soil tillage,
top soil loosening and seedbed preparation
Contents
Preface
Ready for all applications page 2/3
Centaur Super
The fi rst stop for mulch sowing page 4/5
Depth control and crop fl ow
3-D offset tines page 8/9
The mixing does it
Tested on your behalf page 10/11
Technical data page 12
Looking for a multi-functional soil culti-vator? A tool that can not only shallow stubble cultivate and carry out primary soil tillage, but also topsoil deep loosen? If so, then AMAZONE, with the Centaur tine & disc combination cultivator offers the ideal solution in working widths of 3 m, 4 m and 5 m!
It is easy to be convinced just how effi ci-ently and reliably the Centaur, even under the heaviest of operating conditions, in-tensively mixes together last year’s crop residues and soil. Thanks to the four- stagger tine arrangement and the large underframe clearance you can work without interuption, blockage-free – and at a reduced diesel consumption.
Centaur
3
Preface
The top arguments:
P A unit for all operations: stubble work –
primary soil tillage – top soil loosening –
seedbed preparation
P Ideally equipped to deal with diffi cult appli-
cations: 3-D tines with 500 kg overload safety
device and three dimensional defl ection
behaviour
P Blockage-free, even with large amounts of straw:
Offset tine arrangement and 1.05 m frame height
P Punch and power: work rates of up to 70 ha per
day
P Reduced variable costs: fuel consumption: from
8.0 l/ha Wear and repair costs: 3 – 3.50 EUR/ha
4
Centaur Super, 5 m working width
Four rows of offset tines with a tine spacing of
200 mm in combination with a 2-row compact
disc harrow unit characterise the design of the
Centaur Super. The tasks of reconsolidation,
depth control and road transport are assumed
by the wedge ring tyre unit. From choice the
Centaur Super can be equipped with front guide
or support wheels.
Centaur Super – the fi rst stop for mulch sowing
4 rows of offset tines – compact disc harrow – 800 mm wedge ring tyre roller
Centaur
5
Super
– front guide wheels or support wheels for
depth control
– 4 rows of offset tines
– 3-D tines with three-dimensional defl ection
and 500 kg overload protection
– 200 mm tine spacing
– 2-row compact disc harrow unit
– wedge ring tyre roller for depth control,
reconsolidation and transport
– rear following harrow or Crosskill roller (optional)
Overview:
Centaur Super, 5 m working width
3-D tines
8
Depth control
Optimum depth control – perfect
teamwork of wedge ring tyre unit
and front guide or support wheels
The main frame carries the 4 rows of tines. Tine
spacing of 200 mm ensure full area loosening and
intensive cultivation of the soil. The high frame
(1050 mm) combined with the special offset tines
guarantees the blockage-free passage of material,
even in the presence of large amounts of straw.
The Centaur depth guidance is via
800 mm wedge ring tyres to the
rear and in the front via a choice
of guide or support wheels. If the
Centaur is fi tted with guide wheels,
these also aid stability. The unit
itself is depth-controlled in the lower
links of the tractor.
When the Centaur is equipped with
the twin-tyred support wheels for
depth control then the Centaur is
carried fully at the front via the
support wheels with the lower link
arms of the towing vehicle free
fl oating. In unusual cases, by lifting
the lower link arms, a major portion
of the support load can be trans-
ferred directly onto the tractor rear
axle to improve traction. Wide sup-
port wheels are also available for
use with light soils.
The working depth is adjusted using
standard equipment in the form of
swivelable spacers. A simple and
ingenious solution. The trailing disc
unit is automatically adjusted at the
same time when the working depth
is changed.
Centaur
9
Depth control
3-D tines for extreme applications
Share types
Horizontal spring pack –
500 kg overload safety device –
3-dimensional defl ection behaviour
Stubble share, 170 mm
Unishare110 mm
Narrow share, 50 mm
Stubble share, 220 mm
Vario-Clip quick change system – for
toothless, simple share exchange
In different operation areas that need a variety of
share tyres then the Vario-Clip quick change system
is recommended.
The share holder is fi xed to the tines allowing the
share tip to be simply exchanged without tools.
The new tine with its integrated overload safety device
can be used down to a working depth of 35 cm. Two
horizontal springs keep the tine at the depth – only
with a load of more than 500 kg does the tine defl ect
returning automatically into the initial position again.
Compared with usual tines the special pivot socket
allows for 3-dimensional defl ection. Side forces are
therefore also no longer a problem. A large frame
height of 1050 mm guarantees blockage free operation.
Inversion share, 75 mm
Stubble share, 170 mm
Narrow share, 55 mm
The different share systems allow operation from
shallow stubble working to deep top soil loosening.
For a quick and fl exible share change the Vario-Clip
quick change system is available. The well-known
and proven Vario Clip system is available to Centaur
customers for fast and fl exible share changes.
10
The mixing does it
The wedge ring roller re-consolidates the soil in
strips ensuring a good capillary water draw yet
the surface soil structure remains intact allowing
rainwater to drain through. A gaseous exchange
is maintained within the top aerobic soil layer
providing the important preconditions for the
straw rotting process.
Perfect in the rear:The wedge ring tyre roller
The 4 and 5 m Centaurs are folded hydraulically
to less than 3 m width for safe road transport. The
top speed for road transport when combined with
a pneumatic braking system is a rapid 40 km/h.
Mixing, crumbling and levelling –
the trailing disc harrow unit
The twin-row compact disc harrow in the Centaur
Super levels, crumbles and thoroughly mixes the
soil. In this way the surface straw cover is consid-
erably reduced and additional organic material is
incorporated. In heavy soils the proportion of fi ne
soil generated is increased thanks to the improved
crumbling effect.
Both these points are imperative pre-conditions for
later successful sowing operations. The 460 mm
diameter discs, with their maintenance-free, oil-
immersed disc bearings are mounted with rubber
sprung buffer blocks and are thus protected
against overload. When changing the working
depth of the tines the operational intensity of the
discs is maintained automatically. To reset the unit,
the rows of discs can be readjusted separately.
Centaur
11
Testing carried out on the Centaur
in collaboration with the DLG Test
Centre in Gross-Umstadt demon-
strated very favourable consump-
tion fi gures, compared with using
a plough.
Depending on individual site
con ditions, a working depth of
15 cm resulted in fuel consump-
tion of approx. 8.0 – 9.0 litres per
hectare. When working at plough
depth (> 20 cm) the fuel consump-
tion rises to about 13 – 14 l/ha.
For wearing costs and repairs
3 – 3.50 EURO/ha should be
allowed.
Tested on your behalf – fuel consumption
and running costs
During the development of any new machine it is of
utmost importance that any fi ndings concerning the
longevity of the components are gained as soon as
possible and through normal operation in the fi eld this
would take too long.
This is why AMAZONE has built an extensive “torture
track” at their Leipzig factory for utilisation by all soil
tillage implements. Covering the size of 9.000 sqm,
the area is divided into concrete, road metal and
meadowland.
Only after a damage-free four week longevity test
on the torture track is the machine ready for series
production.
The mixing does it
Via torture to quality
Fuel consumption measurement Determining forward speed
Centaur
Centaur 3001 Super
Centaur 4001 Super
Centaur 4001-2 Super
Centaur 5001-2 Super
Execution rigid rigid foldable foldable
Working width (m) 3.00 4.00 4.00 5.00
Operational speed (km/h) 8 – 15
Transport speed (km/h) 25 25 25/40 25/40
Number of tine rows 4 stagger 4 stagger 4 stagger 4 stagger
Number of tines 15 19 19 24
Tine spacing (mm) 200 210 210 210
Number of discs 22 30 30 38
Disc diameter (mm) 460
Tyre size 400/50-15.5
Tractor linkage lower link cat. 3
Power requirement from (kW/HP) 110/150 147/200 147/200 185/250
Transport length (m) 8.30 8.30 9.35 9.35
Transport width (m) 3.00 4.00 3.00 3.00
Transport height (m) 2.00 2.00 2.80 3.10
Weight (kg) 4400 5700 7720 8500
Catros Cenius Centaur Cirrus Citan
Technical data
One C is always present!
Stubble work · primary soil tillage · sowing
Illustrations, content and technical data are not binding! Machine illustrations can vary due to country-specifi c traffi c legislation. For specifi c road traffi c specifi cations, please refer to the instruction manual.
Arable farming concept
Technical data
MI 3700 (en_GB) 10.11
Printed in Germany www.amazone.de www.amazone.co.uk E-Mail: [email protected]
AMAZONEN-WERKE H. DREYER GmbH & Co. KG · P. O. Box 51 · 49202 Hasbergen-Gaste/GermanyPhone +49 (0)5405 501-0 · Fax +49 (0)5405 501-193