Click here to load reader
Upload
vuthien
View
212
Download
0
Embed Size (px)
Citation preview
A global leader in mineral and metallurgical innovation
Metals Technology Centre Mintek produces critical assistance with the selection and testing of materials, undertakes worldclass development work on alloys, and solves difficult problems associated with their use in applications. the organisation is fully equipped to carry out a wide range of standardised and unstandardised tests on the mechanical and corrosion properties of materials to gauge and improve product performance.a variety of clients use Mintek’s consulting services to improve their processes and product performance. several projects have been completed for industry including failure investigations, materials characterisation and testing to standards, including hydrogen induced cracking (Hic) testing to nace tM0177 and nace tM0284. the division’s comprehensive resources can be brought to bear on any investigation, large or small, unique or typical.
Mintek can help you solve your corrosion problems by:• Metals technology consultancy;• Failure analysis;• Corrosion testing to standards;• Simulated corrosion testing;• Material selection and evaluation;• Corrosion monitoring in plants;• Cost-effective research; and,• Corrosion surveys.
The facilities available include:• Electrochemical corrosion laboratory;• Laboratory coupon testing with an extensive range of heaters, water/oil baths, autoclaves, etc.;• Full pilot plant and foundry for melting, casting, forging, and rolling, as well as specialised heat-treatment
facilities;• Vacuum melting facility with vacuum induction, graphite resistance, and tungsten arc furnaces, and vacuum
sintering;• Advanced laboratories for metallographic investigations, including scanning electron microscopy (SEM), X-ray
diffraction (crystallographic texture) and image analysis; and,• Sophisticated computerised equipment for measuring material properties such as fatigue-crack propagation,
corrosion fatigue, fracture toughness, tensile properties and stress corrosion cracking (scc).
For further information, contact:coordinatorMetals technology centreTel: +27 11 709-4511Fax: +27 11 [email protected]
Mintek200 Malibongwe Drive, Randburg, South Africa.Private Bag X3015, Randburg 2125, South Africa.Tel: +27 11 709 4111www.mintek.co.za