METAL WORKS - Armstrong World Industries · 2019-03-01 · METAL WORKS ™ 2 More Options = More Designs The durability of metal with design options using standard or custom panel

Blades – Classics™

METALWORKS

™

2

More Options = More Designs

The durability of metal with design options using standard or custom panel lengths and finishes, limited only by imagination.

Acoustics and aesthetics for hundreds of creative layouts

Blades panel lengths range from 22" to 96"

Nine standard colors, including six Effects™ Wood Looks finishes

Custom RAL® colors available on non-perforated panels

Installs on standard Prelude® XL® 15/16" or 360° Painted suspension system

New panel lengths and caps minimize cuts and waste

MetalWorks™ Blades – Classics™ in Effects™ Cherry

Create a memorable

VISUAL

3

4

MetalWorks™ Blades – Classics™, Divergent Layout; Tectum® Panel Art Wall Panels

5

Classic Doesn’t MeanORDINARY.Express a new narrative with MetalWorks™ Blades – Classics™ linear panels. From divergent drama to striated stories; from sunflowers to sunbursts. Create a look to visually tell your tale with the classic product that will spark your imagination. Turn the page for layouts that will inspire your linear prose.

6

1 x 4 Grid Layouts

Divergent

Striated

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:

ARMSTRONG CEILING SOLUTIONS * Lancaster, PA * Phone: 877-ARMSTRONG

Armstrong is not licensed to provide professional architecture or engineering design services.

These drawings show typical conditions in which the Armstrong product depicted is installed.They are not a substitute for an architect's or engineer's plan and do not reflect the unique requirements oflocal building codes,laws,statutes,ordinances,rules and regulations (Legal Requirements) that may beapplicable for a particular installation. Armstrong Ceiling Solutions does not warrant, and assumes no liability for the accuracy or completeness of the drawings for a particular installation or their fitness for a particular purpose.The user is advised to consult with a duly licensed architect or engineer in the particular locale of the installation to assure compliance with all Legal Requirements.

R

-NJFriez

3/15/2017

213745-01 1X4 2FT_4FT_8FT_Divergent.dwg

1 : 40

- -

1x4 2FT 4FT 8FT Divergent

MetalWorks Blades Classics

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-02 1X4 2FT_4FT_8FT_Striated.dwg

1 : 40

- -

1x4 2FT 4FT 8FT Striated


NOTE: INSTALLATION SHOWN UPSIDE DOWN

METALWORKS™ Blades – Classics™

7

1 x 4 Grid Layouts

SunFlower

Arrows

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-03 1X4 2FT_4FT_SunFlower.dwg

1 : 40

- -

1x4 2Ft 4Ft Sun Flower


DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-04 1X4 2FT_Arrows.dwg

1 : 40

- -

1x4 2FT Arrows



8

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-08 2X2 2FT_Open Cell.dwg

1 : 40

- -

2x2 2FT Open Cell


DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-09 2X2 8FT_X Cross 90 Degree.dwg

1 : 40

- -

2x2 8FT X Cross 90 Degree


2 x 2 Layouts


Open Cell

90 degrees

9

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-10 2X4 4FT_Diagonal Layered 45 Degree.dwg

1 : 40

- -

-2x4 4FT Diagonal Layered 45 Degree


DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-11 2X4 4FT_HarringBone.dwg

1 : 40

- -

2x4 4FT Harring Bone


2 x 4 Layouts


Diagonal Layered 45 Degree

Herringbone

10

8 Ft Diagonal 10 Degree

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-15 4X4 8FT_Diagonal 10 Degree.dwg

1 : 40

- -

4x4 8FT Diagonal 10 Degree


DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-16 4X4 8FT_Staggered.dwg

1 : 40

- -

4x4 8FT Staggered


8 Ft Staggered

4 x 4 Layouts


11

8 Ft Wave 5 Degree

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-18 4X4 8FT_Wave 5 Degree.dwg

1 : 40

- -

4x4 8FT Wave 5 Degree


DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-20 4X4 8FT_Wave Cross 10 Degree.dwg

1 : 40

- -

4x4 8FT Wave Cross 10 Degree


8 Ft Wave Cross 10 Degree

4 x 4 Layouts


12

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-21 4X4 8FT_X Cross 5 Degree.dwg

1 : 40

- -

4x4 8FT X Cross 5 Degree


DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-22 4X4 8FT_X Triple Cross 5 Degree.dwg

1 : 40

- -

4x4 8FT X Triple Cross 5 Degree


8 Ft Cross 5 Degree

8 Ft Triple Cross 5 Degree

4 x 4 Layouts


13

DATE:

DRAWN BY:

DWG. NO.

PROJECT NAME:

SCALE:

CHK BY:

DESC.:

REV: DATE:




R

-NJFriez

3/15/2017

213745-23 2FT_4FT_8FT_SunBurst.dwg

1 : 30

- -

2FT 4FT 8FT SunBurst


Sunburst

Design Considerations:All designs shown require only two clips per panel positioned at least 4" from the end of each linear panel.All designs shown are possible using intermediate duty suspension system.

For more information visit our website at armstrongceilings.com/mwblades or call 1 877 276 7876Custom Capabilities – custom install with variable module grid layout. Call TechLine at 1 877 276 7876

Variable Module: Grid Layout Based on Your Personal Design


14


Linear Panels with Acoustical Optionssmooth texture

KEY SELECTION ATTRIBUTES• Now available in 23" and 47" lengths

for creative design layouts• Blades™ panels come with two factory-

installed end caps, one end cap, or no end caps

- Join several Blades™ panels together to create a longer run

- Use double end capped panel for access areas

- Introducing the Field Cut End Cap for maximum jobsite flexibility (sold separately)

• Six Wood Looks Effects™ finishes• Create acoustical or non-acoustical

upscale linear designs• Blades panel spacing is variable to

accommodate a variety of design and acoustical needs

• MetalWorks™ Blades – Classics™ panels are part of the Sustain™ portfolio and meets the most stringent sustainability compliance standards today

• Fast, easy installation with standard Prelude® XL® 15/16" or 360° painted suspension systems

MetalWorks™ Blades – Classics™ in Effects™ Cherry

Durable metal vertical panels in upscale linear designs are available in acoustical or non-acoustical options.

MetalWorks™ Blades – Classics™

panel

Attachment Clip

Main Beam

116 " ROUND

PERFORATION-

532 " DIAGONAL

CENTERS-

12% OPEN AREA

STD-002D

12% OPEN AREA

932 " [0.281"]

MINIMUMUNPERFORATED

BORDER

45˚

ø 1/

16"

[0.0

63"]

7/32

"[0

.226

"]

7/32"[0.226"] 5/32"

[0.160"]PERFORATION OPTIONS (1:2 scale shown)

M15 (Rd 1612)

M1(Unperforated)

Effects™ Maple (FXMP)

Effects Cherry (FXCH)

Effects Oak (FXOK)

Effects Dark Cherry (FXDC)

Custom Colors Available

Effects Walnut (FXWN)

Effects Walnut Espresso (FXWE)

Field Cut End Cap shown inserted and uninstalled.

Additional sizes and colors may be available. For more information, visit our web site at armstrongceilings.com/metalworks or contact Architectural Specialties TechLine at 1 877 276-7876 for custom panel lengths.

CAD/Revit® drawings at: armstrongceilings.com

Whitelume (WHA)

Gun Metal(MYA)

Silverlume (SIA)

Part of the Sustain® portfolio, meeting sustainability compliance standards

COLORS Due to printing limitations, shade may vary from actual product.

new

armstrongceilings.com/capabilitiesSee more photos at:armstrongceilings.com/photogallery

to do moreplus capabilities

15


Linear Panels with Acoustical Optionssmooth texture

VISUAL SELECTION PERFORMANCE

Seismic Restraint MetalWorks™ Blades – Classics™ are approved for application in all seismic areas when installed per the seismic guidelines in the Armstrong Ceilings installation instructions.

Warranty Details at armstrongceilings.com

Weight; Square Feet/Carton 1.43 lbs/LF

PHYSICAL DATAMaterial Aluminum – thickness 0.032"

Surface Finish Factory-applied polyester paint. Available in White, Silver Grey, Gun Metal Grey, and Effects™ Wood Looks powder-coated, post-production finishes. Custom colors also available. Contact TechLine for custom color matching requests at 1 877 276-7876.

Fire Performance Tested per ASTM E84. Flame Spread Index 25 or less. Smoke Developed Index 50 or less.

CAN/ULC S102 surface burning characteristics. Flame Spread Rating 25 or less. Smoke Developed Classification 50 or less.

Acoustical Options Perforated panels are supplied with a black fiberglass fleece acoustic infill bag to absorb sound (varies by Blades™ panel length).

Design Support Project management assistance is available by calling TechLine customer support at 1 877 276-7876.

Design Considerations When installed, panels hang 4-7/8" below grid face. Panels can be supported by intermediate duty main beams or cross tees, with 2 attachment clips per panel. See MetalWorks™ Blades – Classics™ brochure online for additional design lay-outs. MetalWorks Blades – Classics can be cut in the field only when using the Field Cut End Cap. See installation instructions for details.

Edge Profile

Item No. ◆

Description/Dimensions L x W x D (Inches) Custom Sizes Available

Sabi

ns/

Pane

l†

Was

h

Scru

b

Soil


Durability

8157_ _ _ _ _ _ _ Vertical panel with caps on both ends 94-1/2 x 4 x 1"

2.5 •

• • •


1.2 • • •


0.6 • • •

7202_ _ _ _ _ _ _ Vertical panel with cap on one end 96 x 4 x 1"

2.5 •

• • •

7203_ _ _ _ _ _ _ Vertical panel with no end caps 96 x 4 x 1"

2.5 •

• • •

◆ When specifying or ordering, include the appropriate perforation and color suffix with the item number (e.g., 7201 M 1 5 F X M P). † With M15 perforation NOTE: 6" panel depth option available as a custom product. Additional custom options include 12" x 72" and 24" x 72" panels in lengths up to 144".

SUSPENSION SYSTEMS15/16"

Prelude® XL® suspension system (Pgs. 458-459) (Black) or 360º Painted Grid (Pg. 450)

Dots represent high level of performance.

Item Number

Description

Pieces/Carton

7204 _ _ ◆◆ MetalWorks™ Blades – Classics™ Attachment Clip (SS – Stainless Steel and KO – Black Oxide)

100

7205 MetalWorks™ Blades – Classics™ Alignment Device 24

8158_ _ _ _ ◆ MetalWorks™ Blades – Classics™ 1' x 4" Field Cut End Cap

10

◆ When specifying or ordering, include the color suffix with the item number (e.g., 7201 M 1 5 F X M P). ◆◆When specifying or ordering, include the appropriate 2-letter color suffix,

SS – Stainless Steel or KO – Black Oxide, (e.g., 7204 S S).

ACCESSORIES

New lengths allow for design freedom. See other possible design layouts in our MetalWorks™ Blades technical guide.

▲ ▲ LOCATION DEPENDENT WITH INFILL PANEL

RECYCLED CONTENT

LEED

®

ener

gy

man

agem

ent

recy

clab

le/

exte

nded

pr

oduc

er r

esp.

mat

e ria

l in

gred

ient

re

port

ing

recy

cled

co

nten

tso

urci

ng o

f ra

w m

ater

ials

low

em

ittin

g/

mat

eria

ls

light

ing

qu

alit

y

biob

ased

m

ater

ials

regi

onal

m

ater

ials

desi

gn fo

r fle

xibi

lity

cons

truc

tion

was

te m

gmt

EPD

acou

stic

s

80%UP

TO

For LEED contribution contact TechLine

Living Building Challenge Compliant

DeclareSM

new

new

new

High Performance Sustainable

Ceiling Systems Unperforated (M1)

TAKE THE NEXT

STEP

armstrongceilings.com/blades

BPCS-5580-119

Revit® Is a registered trademark of Autodesk, Inc.; SketchUp® is a registered trademark of Trimble Inc.; RAL® is a registered trademark of RAL gGmbH; DeclareSM is a service mark of International Living Future Institute; LEED® is a registered trademark of the U.S. Green Building Council; Inspiring Great Spaces® is a registered trademark of AFI Licensing LLC All other trademarks used herein are the property of AWI Licensing LLC and/or its affiliates © 2019 AWI Licensing LLC Printed in the United States of America

1 877 276 7876

Customer Service Representatives

7:45 a.m. to 5:00 p.m. EST

Monday through Friday

TechLine – Technical information, detail drawings,

CAD design assistance, installation information,

other technical services – 8:00 a.m. to 5:30 p.m. EST,

Monday through Friday. FAX 1 800 572 8324

or email: [email protected]

armstrongceilings.com/commercial

Latest product news

Standard and custom product information

Online catalog

CAD, Revit®, SketchUp® files

A Ceiling for Every Space® Visual Selection Tool

Product literature and samples – express service

or regular delivery

Contacts – reps, where to buy, who will install

YOU INSPIRE™ SOLUTIONS CENTER

1 800 988 2585 email: [email protected] armstrongceilings.com/youinspire

Design Assistance

Collaborative design

Detail drawings

Specifications

Planning and budgeting

Pre-construction Assistance

Layout drawings for standard

and premium products

Project installation recommendations

Contractor installation assistance

helping to bring your one-of-a-kind ideas to life

Documents

METAL WORKS - Armstrong World Industries · 2019-03-01 · METAL WORKS ™ 2 More Options = More Designs The durability of metal with design options using standard or custom panel